@matter/types 0.13.0-alpha.0-20250304-d4a7592a4 → 0.13.0-alpha.0-20250307-ebf84a05a

package/dist/cjs/clusters/thermostat.js

@@ -32,6 +32,8 @@ var import_TlvObject = require("../tlv/TlvObject.js");
 var import_TlvArray = require("../tlv/TlvArray.js");
 var import_TlvNullable = require("../tlv/TlvNullable.js");
 var import_TlvNoArguments = require("../tlv/TlvNoArguments.js");
+var import_TlvString = require("../tlv/TlvString.js");
+var import_TlvBoolean = require("../tlv/TlvBoolean.js");
 var import_ClusterRegistry = require("../cluster/ClusterRegistry.js");
 /**
  * @license
@@ -49,6 +51,8 @@ var Thermostat;
     Feature2["Setback"] = "Setback";
     Feature2["AutoMode"] = "AutoMode";
     Feature2["LocalTemperatureNotExposed"] = "LocalTemperatureNotExposed";
+    Feature2["MatterScheduleConfiguration"] = "MatterScheduleConfiguration";
+    Feature2["Presets"] = "Presets";
   })(Feature = Thermostat2.Feature || (Thermostat2.Feature = {}));
   let ThermostatRunningMode;
   ((ThermostatRunningMode2) => {
@@ -117,19 +121,19 @@ var Thermostat;
      * will be represented by 360 minutes since midnight and 11:30pm will be represented by 1410 minutes since
      * midnight.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.24.1
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.1
      */
     transitionTime: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt16.bound({ max: 1439 })),
     /**
      * This field shall represent the heat setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.24.2
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.2
      */
     heatSetpoint: (0, import_TlvObject.TlvField)(1, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16)),
     /**
      * This field shall represent the cool setpoint to be applied at this associated transition start time.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.24.3
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.30.3
      */
     coolSetpoint: (0, import_TlvObject.TlvField)(2, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16))
   });
@@ -139,7 +143,7 @@ var Thermostat;
      * device supports more than 10 transitions in its schedule they can send this by sending more than 1 “Set
      * Weekly Schedule” command, each containing the separate information that the device needs to set.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.4.1
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.1
      */
     numberOfTransitionsForSequence: (0, import_TlvObject.TlvField)(0, import_TlvNumber.TlvUInt8),
     /**
@@ -151,7 +155,7 @@ var Thermostat;
      * Each setpoint transition will begin with the day of week for this transition. There can be up to 10
      * transitions for each command.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.4.2
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.2
      */
     dayOfWeekForSequence: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
@@ -175,13 +179,13 @@ var Thermostat;
      * Both bits must be respected, even if the HEAT or COOL feature is not supported, to ensure the command is
      * decoded and handled correctly.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.4.3
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.3
      */
     modeForSequence: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleMode)),
     /**
      * This field shall contain the list of setpoint transitions used to update the specified daily schedules
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.4.4
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2.4
      */
     transitions: (0, import_TlvObject.TlvField)(3, (0, import_TlvArray.TlvArray)(Thermostat2.TlvWeeklyScheduleTransition, { maxLength: 10 }))
   });
@@ -190,14 +194,14 @@ var Thermostat;
      * This field shall indicate the number of days the client would like to return the setpoint values for and
      * could be any combination of single days or the entire week.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.5.1
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3.1
      */
     daysToReturn: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
     /**
      * This field shall indicate the mode the client would like to return the set point values for and could be any
      * combination of heat only, cool only or heat & cool.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.5.2
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3.2
      */
     modeToReturn: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleMode))
   });
@@ -207,6 +211,301 @@ var Thermostat;
     modeForSequence: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleMode)),
     transitions: (0, import_TlvObject.TlvField)(3, (0, import_TlvArray.TlvArray)(Thermostat2.TlvWeeklyScheduleTransition, { maxLength: 10 }))
   });
+  let PresetScenario;
+  ((PresetScenario2) => {
+    PresetScenario2[PresetScenario2["Occupied"] = 1] = "Occupied";
+    PresetScenario2[PresetScenario2["Unoccupied"] = 2] = "Unoccupied";
+    PresetScenario2[PresetScenario2["Sleep"] = 3] = "Sleep";
+    PresetScenario2[PresetScenario2["Wake"] = 4] = "Wake";
+    PresetScenario2[PresetScenario2["Vacation"] = 5] = "Vacation";
+    PresetScenario2[PresetScenario2["GoingToSleep"] = 6] = "GoingToSleep";
+    PresetScenario2[PresetScenario2["UserDefined"] = 254] = "UserDefined";
+  })(PresetScenario = Thermostat2.PresetScenario || (Thermostat2.PresetScenario = {}));
+  Thermostat2.PresetTypeFeatures = {
+    /**
+     * Preset may be automatically activated by the thermostat
+     */
+    automatic: (0, import_BitmapSchema.BitFlag)(0),
+    /**
+     * Preset supports user- provided names
+     */
+    supportsNames: (0, import_BitmapSchema.BitFlag)(1)
+  };
+  Thermostat2.TlvPresetType = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall specify a PresetScenarioEnum value supported by this thermostat.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.1
+     */
+    presetScenario: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall specify a limit for the number of presets for this PresetScenarioEnum.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.2
+     */
+    numberOfPresets: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt8),
+    /**
+     * This field shall specify a bitmap of features for this PresetTypeStruct.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.29.3
+     */
+    presetTypeFeatures: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.PresetTypeFeatures))
+  });
+  Thermostat2.TlvPreset = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall indicate a device generated identifier for this preset. It shall be unique on the device,
+     * and shall NOT be reused after the associated preset has been deleted.
+     *
+     * This field shall only be null when the encompassing PresetStruct is appended to the Presets attribute for
+     * the purpose of creating a new Preset. Refer to Presets for the creation of Preset handles.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.1
+     */
+    presetHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 }))),
+    /**
+     * This field shall indicate the associated PresetScenarioEnum value for this preset.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.2
+     */
+    presetScenario: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall indicate a name provided by a user. The null value shall indicate no name.
+     *
+     * Within each subset of presets sharing the same PresetScenario field value, there shall NOT be any presets
+     * with the same value, including null as a value, in the Name field.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.3
+     */
+    name: (0, import_TlvObject.TlvOptionalField)(2, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvString.bound({ maxLength: 64 }))),
+    /**
+     * This field shall indicate the cooling setpoint for the preset. Refer to Setpoint Limits for value
+     * constraints.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.4
+     */
+    coolingSetpoint: (0, import_TlvObject.TlvOptionalField)(3, import_TlvNumber.TlvInt16),
+    /**
+     * This field shall indicate the heating setpoint for the preset. Refer to Setpoint Limits for value
+     * constraints.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.5
+     */
+    heatingSetpoint: (0, import_TlvObject.TlvOptionalField)(4, import_TlvNumber.TlvInt16),
+    /**
+     * This field shall indicate whether the preset is marked as "built-in", meaning that it can be modified, but
+     * it cannot be deleted.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.28.6
+     */
+    builtIn: (0, import_TlvObject.TlvField)(5, (0, import_TlvNullable.TlvNullable)(import_TlvBoolean.TlvBoolean))
+  });
+  Thermostat2.TlvSetActivePresetRequest = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall specify the value of the PresetHandle field on the PresetStruct to be made active. If the
+     * field is set to null, that indicates there should be no active preset.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.9.1
+     */
+    presetHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 })))
+  });
+  let SystemMode;
+  ((SystemMode2) => {
+    SystemMode2[SystemMode2["Off"] = 0] = "Off";
+    SystemMode2[SystemMode2["Auto"] = 1] = "Auto";
+    SystemMode2[SystemMode2["Cool"] = 3] = "Cool";
+    SystemMode2[SystemMode2["Heat"] = 4] = "Heat";
+    SystemMode2[SystemMode2["EmergencyHeat"] = 5] = "EmergencyHeat";
+    SystemMode2[SystemMode2["Precooling"] = 6] = "Precooling";
+    SystemMode2[SystemMode2["FanOnly"] = 7] = "FanOnly";
+    SystemMode2[SystemMode2["Dry"] = 8] = "Dry";
+    SystemMode2[SystemMode2["Sleep"] = 9] = "Sleep";
+  })(SystemMode = Thermostat2.SystemMode || (Thermostat2.SystemMode = {}));
+  Thermostat2.ScheduleTypeFeatures = {
+    /**
+     * Supports presets
+     *
+     * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
+     * field on the encompassing ScheduleTypeStruct supports specifying presets on ScheduleTransitionStructs
+     * contained in its Transitions field.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.1
+     */
+    supportsPresets: (0, import_BitmapSchema.BitFlag)(0),
+    /**
+     * Supports setpoints
+     *
+     * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
+     * field on the encompassing ScheduleTypeStruct supports specifying setpoints on ScheduleTransitionStructs
+     * contained in its Transitions field.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.2
+     */
+    supportsSetpoints: (0, import_BitmapSchema.BitFlag)(1),
+    /**
+     * Supports user-provided names
+     *
+     * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
+     * field on the encompassing ScheduleTypeStruct supports setting the value of the Name field.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.3
+     */
+    supportsNames: (0, import_BitmapSchema.BitFlag)(2),
+    /**
+     * Supports transitioning to SystemModeOff
+     *
+     * This bit shall indicate that any ScheduleStruct with a SystemMode field whose value matches the SystemMode
+     * field on the encompassing ScheduleTypeStruct supports setting its SystemMode field to Off.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.12.4
+     */
+    supportsOff: (0, import_BitmapSchema.BitFlag)(3)
+  };
+  Thermostat2.TlvScheduleType = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall specify a SystemModeEnum supported by this thermostat for Schedules. The only valid values
+     * for this field shall be Auto, Heat, and Cool.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.1
+     */
+    systemMode: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall specify a limit for the number of Schedules for this SystemMode.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.2
+     */
+    numberOfSchedules: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt8),
+    /**
+     * This field shall specify a bitmap of features for this schedule entry. At least one of SupportsPresets and
+     * SupportsSetpoints shall be set.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.33.3
+     */
+    scheduleTypeFeatures: (0, import_TlvObject.TlvField)(2, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.ScheduleTypeFeatures))
+  });
+  Thermostat2.TlvScheduleTransition = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall specify a bitmask of days of the week that the transition applies to. The Vacation bit
+     * shall NOT be set; vacation schedules shall be set via the vacation preset.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.1
+     */
+    dayOfWeek: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt8, Thermostat2.ScheduleDayOfWeek)),
+    /**
+     * This shall specify the time of day at which the transition becomes active, in terms of minutes within the
+     * day representing the wall clock, where 0 is 00:00:00, 1 is 00:01:00 and 1439 is 23:59:00.
+     *
+     * Handling of transitions during the changeover of Daylight Saving Time is implementation-dependent.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.2
+     */
+    transitionTime: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvUInt16.bound({ max: 1439 })),
+    /**
+     * This field shall specify the preset used at the TransitionTime. If this field is provided, then the
+     * SystemMode, CoolingSetpoint and HeatingSetpoint fields shall NOT be provided.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.3
+     */
+    presetHandle: (0, import_TlvObject.TlvOptionalField)(2, import_TlvString.TlvByteString.bound({ maxLength: 16 })),
+    /**
+     * This shall specify the default mode to which the thermostat will switch for this transition, overriding the
+     * default for the schedule. The only valid values for this field shall be Auto, Heat, Cool and Off. This field
+     * shall only be included when the required system mode differs from the schedule’s default SystemMode.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.4
+     */
+    systemMode: (0, import_TlvObject.TlvOptionalField)(3, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
+     * NOT be included. Refer to Setpoint Limits for value constraints.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.5
+     */
+    coolingSetpoint: (0, import_TlvObject.TlvOptionalField)(4, import_TlvNumber.TlvInt16),
+    /**
+     * This field shall specify the cooling setpoint for the transition. If PresetHandle is set, this field shall
+     * NOT be included. Refer to Setpoint Limits for value constraints.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.32.6
+     */
+    heatingSetpoint: (0, import_TlvObject.TlvOptionalField)(5, import_TlvNumber.TlvInt16)
+  });
+  Thermostat2.TlvSchedule = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall indicate a device generated identifier for this schedule. It shall be unique on the device,
+     * and shall NOT be reused after the associated schedule has been deleted.
+     *
+     * This field shall only be null when the encompassing ScheduleStruct is appended to the Schedules attribute
+     * for the purpose of creating a new Schedule. Refer to Schedules for the creation of Schedule handles.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.1
+     */
+    scheduleHandle: (0, import_TlvObject.TlvField)(0, (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 }))),
+    /**
+     * This field shall specify the default thermostat system mode for transitions in this schedule. The only valid
+     * values for this field shall be Auto, Heat, and Cool.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.2
+     */
+    systemMode: (0, import_TlvObject.TlvField)(1, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall specify a name for the ScheduleStruct.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.3
+     */
+    name: (0, import_TlvObject.TlvOptionalField)(2, import_TlvString.TlvString.bound({ maxLength: 64 })),
+    /**
+     * This field shall indicate the default PresetHandle value for transitions in this schedule.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.4
+     */
+    presetHandle: (0, import_TlvObject.TlvOptionalField)(3, import_TlvString.TlvByteString.bound({ maxLength: 16 })),
+    /**
+     * This field shall specify a list of transitions for the schedule.
+     *
+     * This field shall NOT contain more than one ScheduleStruct with the same TransitionTime field and overlapping
+     * DayOfWeek fields; i.e. there shall be no duplicate transitions.
+     *
+     * If the NumberOfScheduleTransitionsPerDay attribute is not null, then for each bit in
+     * ScheduleDayOfWeekBitmap, the number of transitions with that bit set in DayOfWeek shall NOT be greater than
+     * the value of the NumberOfScheduleTransitionsPerDay attribute.
+     *
+     * For the purposes of determining which ScheduleStruct in this list is currently active, the current time
+     * shall be the number of minutes past midnight in the display value of the current time, not the actual number
+     * of minutes that have elapsed since midnight. On days which transition into or out of daylight saving time,
+     * certain values may repeat or not occur during the transition period.
+     *
+     * A ScheduleTransitionStruct in this list shall be active if the current day of the week matches its DayOfWeek
+     * field and the current time is greater than or equal to the TransitionTime, but less than the TransitionTime
+     * on any other ScheduleTransitionStruct in the Transitions field whose DayOfWeek field also matches the
+     * current day of the week.
+     *
+     * If the current time is less than every ScheduleTransitionStruct whose DayOfWeek field also matches the
+     * current day of the week, the server shall attempt the same process to identify the active
+     * ScheduleTransitionStruct for the day preceding the previously attempted day of the week, repeating until an
+     * active ScheduleTransitionStruct is found or the attempted day is the current day of the week again. If no
+     * active ScheduleTransitionStruct is found, then the active ScheduleTransitionStruct shall be the
+     * ScheduleTransitionStruct with the largest TransitionTime field from the set of ScheduleTransitionStructs
+     * whose DayOfWeek field matches the current day of the week.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.5
+     */
+    transitions: (0, import_TlvObject.TlvField)(4, (0, import_TlvArray.TlvArray)(Thermostat2.TlvScheduleTransition, { minLength: 1 })),
+    /**
+     * This field shall indicate whether the schedule is marked as "built-in", meaning that it can be modified, but
+     * it cannot be deleted.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.31.6
+     */
+    builtIn: (0, import_TlvObject.TlvField)(5, (0, import_TlvNullable.TlvNullable)(import_TlvBoolean.TlvBoolean))
+  });
+  Thermostat2.TlvSetActiveScheduleRequest = (0, import_TlvObject.TlvObject)({
+    /**
+     * This field shall specify the value of the ScheduleHandle field on the ScheduleStruct to be made active.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.8.1
+     */
+    scheduleHandle: (0, import_TlvObject.TlvField)(0, import_TlvString.TlvByteString.bound({ maxLength: 16 }))
+  });
   Thermostat2.HvacSystemType = {
     /**
      * Stage of cooling the HVAC system is using.
@@ -223,7 +522,7 @@ var Thermostat;
      *
      * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.1
      */
-    coolingStage: (0, import_BitmapSchema.BitField)(0, 2),
+    coolingStage: (0, import_BitmapSchema.BitField)(1, 0),
     /**
      * Stage of heating the HVAC system is using.
      *
@@ -239,7 +538,7 @@ var Thermostat;
      *
      * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.6.2
      */
-    heatingStage: (0, import_BitmapSchema.BitField)(2, 2),
+    heatingStage: (0, import_BitmapSchema.BitField)(3, 0),
     /**
      * Is the heating type Heat Pump.
      *
@@ -275,7 +574,7 @@ var Thermostat;
      *
      * This bit shall be supported if the OutdoorTemperature attribute is supported.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.9.1
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.8.11.1
      */
     outdoorTemperature: (0, import_BitmapSchema.BitFlag)(1),
     /**
@@ -292,18 +591,6 @@ var Thermostat;
     ControlSequenceOfOperation2[ControlSequenceOfOperation2["CoolingAndHeating"] = 4] = "CoolingAndHeating";
     ControlSequenceOfOperation2[ControlSequenceOfOperation2["CoolingAndHeatingWithReheat"] = 5] = "CoolingAndHeatingWithReheat";
   })(ControlSequenceOfOperation = Thermostat2.ControlSequenceOfOperation || (Thermostat2.ControlSequenceOfOperation = {}));
-  let SystemMode;
-  ((SystemMode2) => {
-    SystemMode2[SystemMode2["Off"] = 0] = "Off";
-    SystemMode2[SystemMode2["Auto"] = 1] = "Auto";
-    SystemMode2[SystemMode2["Cool"] = 3] = "Cool";
-    SystemMode2[SystemMode2["Heat"] = 4] = "Heat";
-    SystemMode2[SystemMode2["EmergencyHeat"] = 5] = "EmergencyHeat";
-    SystemMode2[SystemMode2["Precooling"] = 6] = "Precooling";
-    SystemMode2[SystemMode2["FanOnly"] = 7] = "FanOnly";
-    SystemMode2[SystemMode2["Dry"] = 8] = "Dry";
-    SystemMode2[SystemMode2["Sleep"] = 9] = "Sleep";
-  })(SystemMode = Thermostat2.SystemMode || (Thermostat2.SystemMode = {}));
   let TemperatureSetpointHold;
   ((TemperatureSetpointHold2) => {
     TemperatureSetpointHold2[TemperatureSetpointHold2["SetpointHoldOff"] = 0] = "SetpointHoldOff";
@@ -325,27 +612,27 @@ var Thermostat;
   };
   Thermostat2.RelayState = {
     /**
-     * Heat State On
+     * Heat Stage On
      */
     heat: (0, import_BitmapSchema.BitFlag)(0),
     /**
-     * Cool State On
+     * Cool Stage On
      */
     cool: (0, import_BitmapSchema.BitFlag)(1),
     /**
-     * Fan State On
+     * Fan Stage On
      */
     fan: (0, import_BitmapSchema.BitFlag)(2),
     /**
-     * Heat 2nd State On
+     * Heat 2nd Stage On
      */
     heatStage2: (0, import_BitmapSchema.BitFlag)(3),
     /**
-     * Cool 2nd State On
+     * Cool 2nd Stage On
      */
     coolStage2: (0, import_BitmapSchema.BitFlag)(4),
     /**
-     * Fan 2nd State On
+     * Fan 2nd Stage On
      */
     fanStage2: (0, import_BitmapSchema.BitFlag)(5),
     /**
@@ -422,7 +709,18 @@ var Thermostat;
     SetpointRaiseLowerMode2[SetpointRaiseLowerMode2["Both"] = 2] = "Both";
   })(SetpointRaiseLowerMode = Thermostat2.SetpointRaiseLowerMode || (Thermostat2.SetpointRaiseLowerMode = {}));
   Thermostat2.TlvSetpointRaiseLowerRequest = (0, import_TlvObject.TlvObject)({
+    /**
+     * The field shall specify which setpoints are to be adjusted.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1.1
+     */
     mode: (0, import_TlvObject.TlvField)(0, (0, import_TlvNumber.TlvEnum)()),
+    /**
+     * This field shall indicate the amount (possibly negative) that should be added to the setpoint(s), in steps
+     * of 0.1°C.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1.2
+     */
     amount: (0, import_TlvObject.TlvField)(1, import_TlvNumber.TlvInt8)
   });
   Thermostat2.AlarmCode = {
@@ -445,7 +743,7 @@ var Thermostat;
        * Indicates whether the heated/cooled space is occupied or not, as measured locally or remotely (over the
        * network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.5
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.4
        */
       occupancy: (0, import_Cluster.Attribute)(
         2,
@@ -457,7 +755,12 @@ var Thermostat;
   Thermostat2.HeatingComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
+       * Indicates the absolute minimum level that the heating setpoint may be set to. This is a limitation
+       * imposed by the manufacturer.
+       *
+       * Refer to Setpoint Limits for constraints
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.5
        */
       absMinHeatSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(3, import_TlvNumber.TlvInt16, { default: 700 }),
       /**
@@ -470,25 +773,30 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a heating device.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.11
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.10
        */
       piHeatingDemand: (0, import_Cluster.OptionalAttribute)(8, import_TlvNumber.TlvUInt8.bound({ max: 100 })),
       /**
-       * Indicates the heating mode setpoint when the room is occupied.
+       * Indicates the heating mode setpoint when the room is occupied. Refer to Setpoint Limits for constraints.
+       *
+       * If an attempt is made to set this attribute to a value greater than MaxHeatSetpointLimit or less than
+       * MinHeatSetpointLimit, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       * If this attribute is set to a value that is greater than
        *
-       * Refer to Setpoint Limits for constraints. If an attempt is made to set this attribute such that these
-       * constraints are violated, a response with the status code CONSTRAINT_ERROR shall be returned.
+       * Band), the value of OccupiedCoolingSetpoint shall be adjusted to (OccupiedHeatingSetpoint +
+       * MinSetpointDeadBand).
        *
        * If the occupancy status of the room is unknown, this attribute shall be used as the heating mode
        * setpoint.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.15
+       * If a client changes the value of this attribute, the server supports the PRES feature, and the server
+       * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
+       * of the ActivePresetHandle attribute shall be set to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.14
        */
-      occupiedHeatingSetpoint: (0, import_Cluster.WritableAttribute)(
-        18,
-        import_TlvNumber.TlvInt16,
-        { scene: true, persistent: true, default: 2e3 }
-      ),
+      occupiedHeatingSetpoint: (0, import_Cluster.WritableAttribute)(18, import_TlvNumber.TlvInt16, { persistent: true, default: 2e3 }),
       /**
        * Indicates the minimum level that the heating setpoint may be set to.
        *
@@ -502,7 +810,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.18
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.17
        */
       minHeatSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         21,
@@ -518,7 +826,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.19
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.18
        */
       maxHeatSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         22,
@@ -530,12 +838,7 @@ var Thermostat;
   Thermostat2.CoolingComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * Indicates the absolute minimum level that the cooling setpoint may be set to. This is a limitation
-       * imposed by the manufacturer.
-       *
-       * Refer to Setpoint Limits for constraints
-       *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.8
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
        */
       absMinCoolSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(5, import_TlvNumber.TlvInt16, { default: 1600 }),
       /**
@@ -544,7 +847,7 @@ var Thermostat;
        *
        * Refer to Setpoint Limits for constraints
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.9
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.8
        */
       absMaxCoolSetpointLimit: (0, import_Cluster.OptionalFixedAttribute)(6, import_TlvNumber.TlvInt16, { default: 3200 }),
       /**
@@ -553,25 +856,29 @@ var Thermostat;
        *
        * This attribute is reported regularly and may be used to control a cooling device.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.10
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.9
        */
       piCoolingDemand: (0, import_Cluster.OptionalAttribute)(7, import_TlvNumber.TlvUInt8.bound({ max: 100 })),
       /**
-       * Indicates the cooling mode setpoint when the room is occupied.
+       * Indicates the cooling mode setpoint when the room is occupied. Refer to Setpoint Limits for constraints.
+       *
+       * If an attempt is made to set this attribute to a value greater than MaxCoolSetpointLimit or less than
+       * MinCoolSetpointLimit, a response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * Refer to Setpoint Limits for constraints. If an attempt is made to set this attribute such that these
-       * constraints are violated, a response with the status code CONSTRAINT_ERROR shall be returned.
+       * If this attribute is set to a value that is less than (OccupiedHeatingSetpoint + MinSetpointDeadBand),
+       * the value of OccupiedHeatingSetpoint shall be adjusted to (OccupiedCoolingSetpoint -
+       * MinSetpointDeadBand).
        *
        * If the occupancy status of the room is unknown, this attribute shall be used as the cooling mode
        * setpoint.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.14
+       * If a client changes the value of this attribute, the server supports the PRES feature, and the server
+       * either does not support the OCC feature or the Occupied bit is set on the Occupancy attribute, the value
+       * of the ActivePresetHandle attribute shall be set to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.13
        */
-      occupiedCoolingSetpoint: (0, import_Cluster.WritableAttribute)(
-        17,
-        import_TlvNumber.TlvInt16,
-        { scene: true, persistent: true, default: 2600 }
-      ),
+      occupiedCoolingSetpoint: (0, import_Cluster.WritableAttribute)(17, import_TlvNumber.TlvInt16, { persistent: true, default: 2600 }),
       /**
        * Indicates the minimum level that the cooling setpoint may be set to.
        *
@@ -581,7 +888,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.20
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.19
        */
       minCoolSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         23,
@@ -597,7 +904,7 @@ var Thermostat;
        * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
        * response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.21
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.20
        */
       maxCoolSetpointLimit: (0, import_Cluster.OptionalWritableAttribute)(
         24,
@@ -620,7 +927,12 @@ var Thermostat;
        * (e.g., out of the range supported by the Thermostat server), the Thermostat server shall respond with a
        * status of SUCCESS and set the value of LocalTemperatureCalibration to the upper or lower limit reached.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.13
+       * NOTE
+       *
+       * Prior to revision 8 of this cluster specification the value of this attribute was constrained to a range
+       * of -2.5°C to 2.5°C.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.12
        */
       localTemperatureCalibration: (0, import_Cluster.OptionalWritableAttribute)(
         16,
@@ -632,14 +944,23 @@ var Thermostat;
   Thermostat2.CoolingAndOccupancyComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * Indicates the cooling mode setpoint when the room is unoccupied.
+       * Indicates the cooling mode setpoint when the room is unoccupied. Refer to Setpoint Limits for
+       * constraints.
+       *
+       * If an attempt is made to set this attribute to a value greater than MaxCoolSetpointLimit or less than
+       * MinCoolSetpointLimit, a response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * Refer to Setpoint Limits for constraints. If an attempt is made to set this attribute such that these
-       * constraints are violated, a response with the status code CONSTRAINT_ERROR shall be returned.
+       * If this attribute is set to a value that is less than (UnoccupiedHeatingSetpoint + MinSetpointDeadBand),
+       * the value of UnoccupiedHeatingSetpoint shall be adjusted to (UnoccupiedCoolingSetpoint -
+       * MinSetpointDeadBand).
        *
        * If the occupancy status of the room is unknown, this attribute shall NOT be used.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.16
+       * If a client changes the value of this attribute, the server supports the PRES and OCC features, and the
+       * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
+       * be set to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.15
        */
       unoccupiedCoolingSetpoint: (0, import_Cluster.WritableAttribute)(19, import_TlvNumber.TlvInt16, { persistent: true, default: 2600 })
     }
@@ -647,14 +968,24 @@ var Thermostat;
   Thermostat2.HeatingAndOccupancyComponent = import_MutableCluster.MutableCluster.Component({
     attributes: {
       /**
-       * Indicates the heating mode setpoint when the room is unoccupied.
+       * Indicates the heating mode setpoint when the room is unoccupied. Refer to Setpoint Limits for
+       * constraints.
+       *
+       * If an attempt is made to set this attribute to a value greater than MaxHeatSetpointLimit or less than
+       * MinHeatSetpointLimit, a response with the status code CONSTRAINT_ERROR shall be returned.
        *
-       * Refer to Setpoint Limits for constraints. If an attempt is made to set this attribute such that these
-       * constraints are violated, a response with the status code CONSTRAINT_ERROR shall be returned.
+       * If this attribute is set to a value that is greater than (UnoccupiedCoolingSetpoint -
+       * MinSetpointDeadBand), the value of UnoccupiedCoolingSetpoint shall be adjusted to
+       *
+       * + MinSetpointDeadBand).
        *
        * If the occupancy status of the room is unknown, this attribute shall NOT be used.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.17
+       * If a client changes the value of this attribute, the server supports the PRES and OCC features, and the
+       * Occupied bit is not set on the Occupancy attribute, the value of the ActivePresetHandle attribute shall
+       * be set to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.16
        */
       unoccupiedHeatingSetpoint: (0, import_Cluster.WritableAttribute)(20, import_TlvNumber.TlvInt16, { persistent: true, default: 2e3 })
     }
@@ -665,21 +996,31 @@ var Thermostat;
        * On devices which support the AUTO feature, this attribute shall indicate the minimum difference between
        * the Heat Setpoint and the Cool Setpoint.
        *
-       * Refer to Setpoint Limits for constraints. If an attempt is made to set this attribute to a value which
-       * conflicts with setpoint values then those setpoints shall be adjusted by the minimum amount to permit
-       * this attribute to be set to the desired value. If an attempt is made to set this attribute to a value
-       * which is not consistent with the constraints and cannot be resolved by modifying setpoints then a
-       * response with the status code CONSTRAINT_ERROR shall be returned.
+       * Refer to Setpoint Limits for constraints.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.22
+       * NOTE
+       *
+       * Prior to revision 8 of this cluster specification the value of this attribute was constrained to a range
+       * of 0°C to 2.5°C.
+       *
+       * NOTE
+       *
+       * For backwards compatibility, this attribute is optionally writeable. However any writes to this
+       * attribute shall be silently ignored.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.21
        */
-      minSetpointDeadBand: (0, import_Cluster.WritableAttribute)(25, import_TlvNumber.TlvInt8, { persistent: true, writeAcl: import_model.AccessLevel.Manage }),
+      minSetpointDeadBand: (0, import_Cluster.WritableAttribute)(
+        25,
+        import_TlvNumber.TlvInt8.bound({ min: 0 }),
+        { persistent: true, writeAcl: import_model.AccessLevel.Manage }
+      ),
       /**
        * Indicates the running mode of the thermostat. This attribute uses the same values as SystemModeEnum but
        * can only be Off, Cool or Heat. This attribute is intended to provide additional information when the
        * thermostat’s system mode is in auto mode.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.27
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.26
        */
       thermostatRunningMode: (0, import_Cluster.OptionalAttribute)(
         30,
@@ -697,54 +1038,34 @@ var Thermostat;
        * This attribute may be able to be used as the base to determine if the device supports weekly scheduling
        * by reading the attribute. Successful response means that the weekly scheduling is supported.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.28
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.27
        */
       startOfWeek: (0, import_Cluster.FixedAttribute)(32, (0, import_TlvNumber.TlvEnum)()),
       /**
        * Indicates how many weekly schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.29
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.28
        */
       numberOfWeeklyTransitions: (0, import_Cluster.FixedAttribute)(33, import_TlvNumber.TlvUInt8, { default: 0 }),
       /**
        * Indicates how many daily schedule transitions the thermostat is capable of handling.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.30
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.29
        */
       numberOfDailyTransitions: (0, import_Cluster.FixedAttribute)(34, import_TlvNumber.TlvUInt8, { default: 0 })
     },
     commands: {
       /**
-       * Upon receipt, the weekly schedule for updating setpoints shall be stored in the thermostat and SHOULD
-       * begin at the time of receipt. A status code shall be sent in response.
-       *
-       * When a command is received that requires a total number of transitions greater than the device supports,
-       * the status of the response shall be INSUFFICIENT_SPACE.
-       *
-       * When any of the setpoints sent in the sequence is out of range (AbsMin/MaxSetPointLimit), or when the
-       * Mode for Sequence field includes a mode not supported by the device, the status of the response shall be
-       * CONSTRAINT_ERROR and no setpoints from the entire sequence SHOULD be used.
-       *
-       * When an overlapping transition is detected, the status of the response shall be FAILURE.
-       *
-       * When a device which does not support multiple days in a command receives a command with more than one
-       * bit set in the DayOfWeekForSequence field, or when a device which does not support multiple modes in a
-       * command receives a command with more than one bit set in the ModeForSequence field, or when the contents
-       * of the Transitions field does not agree with NumberOfTransitionsForSequence, DayOfWeekForSequence or
-       * ModeForSequence, the status of the response shall be INVALID_COMMAND.
-       *
-       * When the transitions could be added successfully, the status of the response shall be SUCCESS.
-       *
-       * The set weekly schedule command is used to update the thermostat weekly setpoint schedule from a
-       * management system. If the thermostat already has a weekly setpoint schedule programmed, then it SHOULD
-       * replace each daily setpoint set as it receives the updates from the management system. For example, if
-       * the thermostat has 4 setpoints for every day of the week and is sent a Set Weekly Schedule command with
-       * one setpoint for Saturday then the thermostat SHOULD remove all 4 setpoints for Saturday and replace
-       * those with the updated setpoint but leave all other days unchanged. If the schedule is larger than what
-       * fits in one frame or contains more than 10 transitions, the schedule shall then be sent using multiple
-       * Set Weekly Schedule Commands.
-       *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.4
+       * This command is used to update the thermostat weekly setpoint schedule from a management system. If the
+       * thermostat already has a weekly setpoint schedule programmed, then it SHOULD replace each daily setpoint
+       * set as it receives the updates from the management system. For example, if the thermostat has 4
+       * setpoints for every day of the week and is sent a SetWeeklySchedule command with one setpoint for
+       * Saturday then the thermostat SHOULD remove all 4 setpoints for Saturday and replace those with the
+       * updated setpoint but leave all other days unchanged. If the schedule is larger than what fits in one
+       * frame or contains more than 10 transitions, the schedule shall then be sent using multiple
+       * SetWeeklySchedule Commands.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.2
        */
       setWeeklySchedule: (0, import_Cluster.Command)(
         1,
@@ -754,12 +1075,7 @@ var Thermostat;
         { invokeAcl: import_model.AccessLevel.Manage }
       ),
       /**
-       * Upon receipt, the unit SHOULD send in return the Get Weekly Schedule Response command. The Days to
-       * Return and Mode to Return fields are defined as bitmask for the flexibility to support multiple days and
-       * multiple modes within one command. If thermostat cannot handle incoming command with multiple days
-       * and/or multiple modes within one command, it shall send default response of INVALID_COMMAND in return.
-       *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.5
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.3
        */
       getWeeklySchedule: (0, import_Cluster.Command)(2, Thermostat2.TlvGetWeeklyScheduleRequest, 0, Thermostat2.TlvGetWeeklyScheduleResponse),
       /**
@@ -768,7 +1084,7 @@ var Thermostat;
        * Upon receipt, all transitions currently stored shall be cleared and a default response of SUCCESS shall
        * be sent in response. There are no error responses to this command.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.7
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.5
        */
       clearWeeklySchedule: (0, import_Cluster.Command)(3, import_TlvNoArguments.TlvNoArguments, 3, import_Cluster.TlvNoResponse, { invokeAcl: import_model.AccessLevel.Manage })
     }
@@ -796,7 +1112,7 @@ var Thermostat;
        * Thermostat server shall set its OccupiedSetback value to OccupiedSetbackMin and shall send a Write
        * Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.38
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.37
        */
       occupiedSetback: (0, import_Cluster.WritableAttribute)(
         52,
@@ -809,7 +1125,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.39
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.38
        */
       occupiedSetbackMin: (0, import_Cluster.FixedAttribute)(53, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
       /**
@@ -818,7 +1134,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.40
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.39
        */
       occupiedSetbackMax: (0, import_Cluster.FixedAttribute)(54, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null })
     }
@@ -847,7 +1163,7 @@ var Thermostat;
        * the Thermostat server shall set its UnoccupiedSetback value to UnoccupiedSetbackMin and shall send a
        * Write Attribute Response command with a Status Code field enumeration of SUCCESS response.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.41
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.40
        */
       unoccupiedSetback: (0, import_Cluster.WritableAttribute)(
         55,
@@ -860,7 +1176,7 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.42
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.41
        */
       unoccupiedSetbackMin: (0, import_Cluster.FixedAttribute)(56, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
       /**
@@ -869,15 +1185,288 @@ var Thermostat;
        *
        * The null value indicates the attribute is unused.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.43
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.42
        */
       unoccupiedSetbackMax: (0, import_Cluster.FixedAttribute)(57, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null })
     }
   });
+  Thermostat2.PresetsComponent = import_MutableCluster.MutableCluster.Component({
+    attributes: {
+      /**
+       * Indicates the supported PresetScenarioEnum values, limits on how many presets can be created for each
+       * PresetScenarioEnum, and whether or not a thermostat can transition automatically to a given scenario.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.52
+       */
+      presetTypes: (0, import_Cluster.FixedAttribute)(72, (0, import_TlvArray.TlvArray)(Thermostat2.TlvPresetType), { default: [] }),
+      /**
+       * Indicates the maximum number of entries supported by the Presets attribute.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.54
+       */
+      numberOfPresets: (0, import_Cluster.FixedAttribute)(74, import_TlvNumber.TlvUInt8, { default: 0 }),
+      /**
+       * Indicates the PresetHandle of the active preset. If this attribute is null, then there is no active
+       * preset.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.58
+       */
+      activePresetHandle: (0, import_Cluster.Attribute)(
+        78,
+        (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 })),
+        { persistent: true, default: null }
+      ),
+      /**
+       * This attribute shall contain the current list of configured presets. On receipt of a write request:
+       *
+       *   1. If the PresetHandle field is null, the PresetStruct shall be treated as an added preset, and the
+       *      device shall create a new unique value for the PresetHandle field.
+       *
+       *     a. If the BuiltIn field is true, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *   2. If the PresetHandle field is not null, the PresetStruct shall be treated as a modification of an
+       *      existing preset.
+       *
+       *     a. If the value of the PresetHandle field does not match any of the existing presets, a response
+       *        with the status code NOT_FOUND shall be returned.
+       *
+       *     b. If the value of the PresetHandle field is duplicated on multiple presets in the updated list, a
+       *        response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     c. If the BuiltIn field is true, and the PresetStruct in the current value with a matching
+       *        PresetHandle field has a BuiltIn field set to false, a response with the status code
+       *        CONSTRAINT_ERROR shall be returned.
+       *
+       *     d. If the BuiltIn field is false, and the PresetStruct in the current value with a matching
+       *        PresetHandle field has a BuiltIn field set to true, a response with the status code
+       *        CONSTRAINT_ERROR shall be returned.
+       *
+       *   3. If the specified PresetScenarioEnum value does not exist in PresetTypes, a response with the status
+       *      code CONSTRAINT_ERROR shall be returned.
+       *
+       *   4. If the Name is set, but the associated PresetTypeStruct does not have the SupportsNames bit set, a
+       *      response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *   5. If appending the received PresetStruct to the pending list of Presets would cause the total number
+       *      of pending presets to exceed the value of the NumberOfPresets attribute, a response with the status
+       *      code RESOURCE_EXHAUSTED shall be returned.
+       *
+       *   6. If appending the received PresetStruct to the pending list of Presets would cause the total number
+       *      of pending presets whose PresetScenario field matches the appended preset’s PresetScenario field to
+       *      exceed the value of the NumberOfPresets field on the PresetTypeStruct whose PresetScenario matches
+       *      the appended preset’s PresetScenario field, a response with the status code RESOURCE_EXHAUSTED
+       *      shall be returned.
+       *
+       *   7. Otherwise, the write shall be pended until receipt of a commit request, and the status code SUCCESS
+       *      shall be returned.
+       *
+       *     a. If the BuiltIn field is null:
+       *
+       *       i. If there is a PresetStruct in the current value with a matching PresetHandle field, the BuiltIn
+       *           field on the pending PresetStruct shall be set to the value of the BuiltIn on the matching
+       *           PresetStruct.
+       *
+       *       ii. Otherwise, the BuiltIn field on the pending PresetStruct shall be set to false.
+       *
+       * On an attempt to commit, the status of this attribute shall be determined as follows:
+       *
+       *   1. For all existing presets:
+       *
+       *     a. If, after applying all pending changes, the updated value of the Presets attribute would not
+       *        contain a PresetStruct with a matching PresetHandle field, indicating the removal of the
+       *        PresetStruct, the server shall check for invalid removal of the PresetStruct:
+       *
+       *       i. If the BuiltIn field is true on the removed PresetStruct, the attribute status shall be
+       *            CONSTRAINT_ERROR.
+       *
+       *       ii. If the MSCH feature is supported and the removed PresetHandle would be referenced by any
+       *            PresetHandle on any ScheduleTransitionStruct on any ScheduleStruct in the updated value of
+       *            the Schedules attribute, the attribute status shall be INVALID_IN_STATE.
+       *
+       *       iii. If the removed PresetHandle is equal to the value of the ActivePresetHandle attribute, the
+       *            attribute status shall be INVALID_IN_STATE.
+       *
+       *   2. Otherwise, the attribute status shall be SUCCESS.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.60
+       */
+      presets: (0, import_Cluster.WritableAttribute)(
+        80,
+        (0, import_TlvArray.TlvArray)(Thermostat2.TlvPreset),
+        { persistent: true, default: [], writeAcl: import_model.AccessLevel.Manage }
+      )
+    },
+    commands: {
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.9
+       */
+      setActivePresetRequest: (0, import_Cluster.Command)(6, Thermostat2.TlvSetActivePresetRequest, 6, import_Cluster.TlvNoResponse)
+    }
+  });
+  Thermostat2.MatterScheduleConfigurationComponent = import_MutableCluster.MutableCluster.Component({
+    attributes: {
+      /**
+       * Indicates the supported SystemMode values for Schedules, limits on how many schedules can be created for
+       * each SystemMode value, and whether or not a given SystemMode value supports transitions to Presets,
+       * target setpoints, or both.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.53
+       */
+      scheduleTypes: (0, import_Cluster.FixedAttribute)(73, (0, import_TlvArray.TlvArray)(Thermostat2.TlvScheduleType), { default: [] }),
+      /**
+       * Indicates the maximum number of entries supported by the Schedules attribute.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.55
+       */
+      numberOfSchedules: (0, import_Cluster.FixedAttribute)(75, import_TlvNumber.TlvUInt8, { default: 0 }),
+      /**
+       * Indicates the maximum number of transitions per Schedules attribute entry.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.56
+       */
+      numberOfScheduleTransitions: (0, import_Cluster.FixedAttribute)(76, import_TlvNumber.TlvUInt8, { default: 0 }),
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9
+       */
+      numberOfScheduleTransitionPerDay: (0, import_Cluster.FixedAttribute)(77, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvUInt8), { default: null }),
+      /**
+       * Indicates the ScheduleHandle of the active schedule. A null value in this attribute indicates that there
+       * is no active schedule.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.59
+       */
+      activeScheduleHandle: (0, import_Cluster.Attribute)(
+        79,
+        (0, import_TlvNullable.TlvNullable)(import_TlvString.TlvByteString.bound({ maxLength: 16 })),
+        { persistent: true, default: null }
+      ),
+      /**
+       * This attribute shall contain a list of ScheduleStructs. On receipt of a write request:
+       *
+       *   1. For all schedules in the write request:
+       *
+       *     a. If the ScheduleHandle field is null, the ScheduleStruct shall be treated as an added schedule,
+       *        and the device shall create a new unique value for the ScheduleHandle field.
+       *
+       *       i. If the BuiltIn field is true, a response with the status code CONSTRAINT_ERROR shall be
+       *          returned.
+       *
+       *     b. Otherwise, if the ScheduleHandle field is not null, the ScheduleStruct shall be treated as a
+       *        modification of an existing schedule.
+       *
+       *       i. If the value of the ScheduleHandle field does not match any of the existing schedules, a
+       *            response with the status code NOT_FOUND shall be returned.
+       *
+       *       ii. If the BuiltIn field is true, and the ScheduleStruct in the current value with a matching
+       *            ScheduleHandle field has a BuiltIn field set to false, a response with the status code
+       *            CONSTRAINT_ERROR shall be returned.
+       *
+       *       iii. If the BuiltIn field is false, and the ScheduleStruct in the current value with a matching
+       *            ScheduleHandle field has a BuiltIn field set to true, a response with the status code
+       *            CONSTRAINT_ERROR shall be returned.
+       *
+       *     c. If the specified SystemMode does not exist in ScheduleTypes, a response with the status code
+       *        CONSTRAINT_ERROR shall be returned.
+       *
+       *     d. If the number of transitions exceeds the NumberOfScheduleTransitions value, a response with the
+       *        status code RESOURCE_EXHAUSTED shall be returned.
+       *
+       *     e. If the value of the NumberOfScheduleTransitionsPerDay attribute is not null, and the number of
+       *        transitions on any single day of the week exceeds the NumberOfScheduleTransitionsPerDay value, a
+       *        response with the status code RESOURCE_EXHAUSTED shall be returned.
+       *
+       *     f. If the PresetHandle field is present, but the associated ScheduleTypeStruct does not have the
+       *        SupportsPresets bit set, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     g. If the PresetHandle field is present, but after applying all pending changes, the Presets
+       *        attribute would not contain a PresetStruct whose PresetHandle field matches the value of the
+       *        PresetHandle field, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     h. If the Name is set, but the associated ScheduleTypeStruct does not have the SupportsNames bit
+       *        set, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *       i. For all transitions in all schedules in the write request:
+       *
+       *       i. If the PresetHandle field is present, but the ScheduleTypeStruct matching the value of the
+       *          SystemMode field on the encompassing ScheduleStruct does not have the SupportsPresets bit set,
+       *          a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     j. If the PresetHandle field is present, but after applying all pending changes, the Presets
+       *        attribute would not contain a PresetStruct whose PresetHandle field matches the value of the
+       *        PresetHandle field, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *       i. If the SystemMode field is present, but the ScheduleTypeStruct matching the value of the
+       *           SystemMode field on the encompassing ScheduleStruct does not have the SupportsSetpoints bit
+       *           set, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *       ii. If the SystemMode field is has a value of SystemModeOff, but the ScheduleTypeStruct matching
+       *           the value of the SystemMode field on the encompassing ScheduleStruct does not have the
+       *           SupportsOff bit set, a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     k. If the HeatingSetpoint field is present, but the ScheduleTypeStruct matching the value of the
+       *        SystemMode field on the encompassing ScheduleStruct does not have the SupportsSetpoints bit set,
+       *        a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *     l. If the CoolingSetpoint field is present, but the ScheduleTypeStruct matching the value of the
+       *        SystemMode field on the encompassing ScheduleStruct does not have the SupportsSetpoints bit set,
+       *        a response with the status code CONSTRAINT_ERROR shall be returned.
+       *
+       *   2. If appending the received ScheduleStruct to the pending list of Schedules would cause the total
+       *      number of pending schedules to exceed the value of the NumberOfSchedules attribute, a response with
+       *      the status code RESOURCE_EXHAUSTED shall be returned.
+       *
+       *   3. If appending the received ScheduleStruct to the pending list of Schedules would cause the total
+       *      number of pending schedules whose SystemMode field matches the appended schedule’s SystemMode field
+       *      to exceed the value of the NumberOfSchedules field on the ScheduleTypeStruct whose SystemMode field
+       *      matches the appended schedule’s SystemMode field, a response with the status code
+       *      RESOURCE_EXHAUSTED shall be returned.
+       *
+       *   4. Otherwise, the write shall be pended until receipt of a commit request, and the attribute status
+       *      shall be SUCCESS.
+       *
+       *     a. If the BuiltIn field is null:
+       *
+       *       i. If there is a ScheduleStruct in the current value with a matching ScheduleHandle field, the
+       *           BuiltIn field on the pending ScheduleStruct shall be set to the value of the BuiltIn on the
+       *           matching ScheduleStruct.
+       *
+       *       ii. Otherwise, the BuiltIn field on the pending ScheduleStruct shall be set to false.
+       *
+       * On an attempt to commit, the status of this attribute shall be determined as follows:
+       *
+       *   1. For all existing schedules:
+       *
+       *     a. If, after applying all pending changes, the updated value of the Schedules attribute would not
+       *        contain a ScheduleStruct with a matching ScheduleHandle field, indicating the removal of the
+       *        ScheduleStruct, the server shall check for invalid removal of the ScheduleStruct:
+       *
+       *       i. If the BuiltIn field is true on the removed ScheduleStruct, the attribute status shall be
+       *           CONSTRAINT_ERROR.
+       *
+       *       ii. If the removed ScheduleHandle is equal to the value of the ActiveScheduleHandle attribute, the
+       *           attribute status shall be INVALID_IN_STATE.
+       *
+       *   2. Otherwise, the attribute status shall be SUCCESS.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.61
+       */
+      schedules: (0, import_Cluster.WritableAttribute)(
+        81,
+        (0, import_TlvArray.TlvArray)(Thermostat2.TlvSchedule),
+        { persistent: true, default: [], writeAcl: import_model.AccessLevel.Manage }
+      )
+    },
+    commands: {
+      /**
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.8
+       */
+      setActiveScheduleRequest: (0, import_Cluster.Command)(5, Thermostat2.TlvSetActiveScheduleRequest, 5, import_Cluster.TlvNoResponse)
+    }
+  });
   Thermostat2.Base = import_MutableCluster.MutableCluster.Component({
     id: 513,
     name: "Thermostat",
-    revision: 6,
+    revision: 8,
     features: {
       /**
        * Heating
@@ -924,7 +1513,19 @@ var Thermostat;
        *
        * @see {@link MatterSpecification.v13.Cluster} § 4.3.4.1
        */
-      localTemperatureNotExposed: (0, import_BitmapSchema.BitFlag)(6)
+      localTemperatureNotExposed: (0, import_BitmapSchema.BitFlag)(6),
+      /**
+       * MatterScheduleConfiguration
+       *
+       * Supports enhanced schedules
+       */
+      matterScheduleConfiguration: (0, import_BitmapSchema.BitFlag)(7),
+      /**
+       * Presets
+       *
+       * Thermostat supports setpoint presets
+       */
+      presets: (0, import_BitmapSchema.BitFlag)(8)
     },
     attributes: {
       /**
@@ -940,22 +1541,23 @@ var Thermostat;
        *   • Otherwise, if the LTNE feature is supported, there is no feedback externally available for the
        *     LocalTemperatureCalibration. In that case, the LocalTemperature attribute shall always report null.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.3
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.2
        */
       localTemperature: (0, import_Cluster.Attribute)(0, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the outdoor temperature, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.4
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.3
        */
       outdoorTemperature: (0, import_Cluster.OptionalAttribute)(1, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the HVAC system type controlled by the thermostat. If the thermostat uses physical DIP
-       * switches to set these parameters, this information shall be available read-only from the DIP switches.
-       * If these parameters are set via software, there shall be read/write access in order to provide remote
-       * programming capability.
+       * switches to set these parameters, this information shall be available read-only
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.12
+       * from the DIP switches. If these parameters are set via software, there shall be read/write access in
+       * order to provide remote programming capability.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.11
        * @deprecated
        */
       hvacSystemTypeConfiguration: (0, import_Cluster.OptionalWritableAttribute)(
@@ -973,7 +1575,7 @@ var Thermostat;
        * If the LocalTemperature RemoteSensing bit is written with a value of 1 when the LTNE feature is present,
        * the write shall fail and the server shall report a CONSTRAINT_ERROR.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.23
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.22
        */
       remoteSensing: (0, import_Cluster.OptionalWritableAttribute)(
         26,
@@ -984,7 +1586,11 @@ var Thermostat;
        * Indicates the overall operating environment of the thermostat, and thus the possible system modes that
        * the thermostat can operate in.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.24
+       * If an attempt is made to write to this attribute, the server shall silently ignore the write and the
+       * value of this attribute shall remain unchanged. This behavior is in place for backwards compatibility
+       * with existing thermostats.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.23
        */
       controlSequenceOfOperation: (0, import_Cluster.WritableAttribute)(
         27,
@@ -995,12 +1601,12 @@ var Thermostat;
        * Indicates the current operating mode of the thermostat. Its value shall be limited by the
        * ControlSequenceOfOperation attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.25
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.24
        */
       systemMode: (0, import_Cluster.WritableAttribute)(
         28,
         (0, import_TlvNumber.TlvEnum)(),
-        { scene: true, persistent: true, default: 1 /* Auto */, writeAcl: import_model.AccessLevel.Manage }
+        { persistent: true, default: 1 /* Auto */, writeAcl: import_model.AccessLevel.Manage }
       ),
       /**
        * Indicates the temperature hold status on the thermostat. If hold status is on, the thermostat SHOULD
@@ -1009,7 +1615,18 @@ var Thermostat;
        * If the thermostat supports setpoint hold for a specific duration, it SHOULD also implement the
        * TemperatureSetpointHoldDuration attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.31
+       * If the server supports a setpoint hold for a specific duration, it SHOULD also implement the
+       * SetpointHoldExpiryTimestamp attribute.
+       *
+       * If this attribute is updated to SetpointHoldOn and the TemperatureSetpointHoldDuration has a non- null
+       * value and the SetpointHoldExpiryTimestamp is supported, the server shall update the
+       * SetpointHoldExpiryTimestamp with a value of current UTC timestamp, in seconds, plus the value in
+       * TemperatureSetpointHoldDuration multiplied by 60.
+       *
+       * If this attribute is updated to SetpointHoldOff and the SetpointHoldExpiryTimestamp is supported, the
+       * server shall set the SetpointHoldExpiryTimestamp to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.30
        */
       temperatureSetpointHold: (0, import_Cluster.OptionalWritableAttribute)(
         35,
@@ -1021,7 +1638,15 @@ var Thermostat;
        * specified duration SHOULD implement this attribute. The null value indicates the field is unused. All
        * other values are reserved.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.32
+       * If this attribute is updated to a non-null value and the TemperatureSetpointHold is set to
+       * SetpointHoldOn and the SetpointHoldExpiryTimestamp is supported, the server shall update
+       * SetpointHoldExpiryTimestamp with a value of current UTC timestamp, in seconds, plus the new value of
+       * this attribute multiplied by 60.
+       *
+       * If this attribute is set to null and the SetpointHoldExpiryTimestamp is supported, the server shall set
+       * the SetpointHoldExpiryTimestamp to null.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.31
        */
       temperatureSetpointHoldDuration: (0, import_Cluster.OptionalWritableAttribute)(
         36,
@@ -1046,7 +1671,7 @@ var Thermostat;
        * Modifying the ScheduleActive bit does not clear or delete previous weekly schedule programming
        * configurations.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.33
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.32
        */
       thermostatProgrammingOperationMode: (0, import_Cluster.OptionalWritableAttribute)(
         37,
@@ -1057,7 +1682,7 @@ var Thermostat;
        * Indicates the current relay state of the heat, cool, and fan relays. Unimplemented outputs shall be
        * treated as if they were Off.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.34
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.33
        */
       thermostatRunningState: (0, import_Cluster.OptionalAttribute)(41, (0, import_TlvNumber.TlvBitmap)(import_TlvNumber.TlvUInt16, Thermostat2.RelayState)),
       /**
@@ -1069,7 +1694,7 @@ var Thermostat;
        * provider). Because automation services may initiate frequent setpoint changes, this attribute clearly
        * differentiates the source of setpoint changes made at the thermostat.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.35
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.34
        */
       setpointChangeSource: (0, import_Cluster.OptionalAttribute)(
         48,
@@ -1083,13 +1708,13 @@ var Thermostat;
        *
        * The null value indicates that the previous setpoint was unknown.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.36
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.35
        */
       setpointChangeAmount: (0, import_Cluster.OptionalAttribute)(49, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the time in UTC at which the SetpointChangeAmount attribute change was recorded.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.37
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.36
        */
       setpointChangeSourceTimestamp: (0, import_Cluster.OptionalAttribute)(50, import_TlvNumber.TlvEpochS, { default: 0 }),
       /**
@@ -1118,7 +1743,7 @@ var Thermostat;
        * when a setpoint is of a specified amount greater than the measured temperature. This allows the heated
        * space to be quickly heated to the desired level set by the user.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.44
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.43
        */
       emergencyHeatDelta: (0, import_Cluster.OptionalWritableAttribute)(
         58,
@@ -1129,7 +1754,7 @@ var Thermostat;
        * Indicates the type of Mini Split ACTypeEnum of Mini Split AC is defined depending on how Cooling and
        * Heating condition is achieved by Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.45
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.44
        */
       acType: (0, import_Cluster.OptionalWritableAttribute)(
         64,
@@ -1139,7 +1764,7 @@ var Thermostat;
       /**
        * Indicates capacity of Mini Split AC in terms of the format defined by the ACCapacityFormat attribute
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.46
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.45
        */
       acCapacity: (0, import_Cluster.OptionalWritableAttribute)(
         65,
@@ -1149,7 +1774,7 @@ var Thermostat;
       /**
        * Indicates type of refrigerant used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.47
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.46
        */
       acRefrigerantType: (0, import_Cluster.OptionalWritableAttribute)(
         66,
@@ -1159,7 +1784,7 @@ var Thermostat;
       /**
        * Indicates the type of compressor used within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.48
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.47
        */
       acCompressorType: (0, import_Cluster.OptionalWritableAttribute)(
         67,
@@ -1169,7 +1794,7 @@ var Thermostat;
       /**
        * Indicates the type of errors encountered within the Mini Split AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.49
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.48
        */
       acErrorCode: (0, import_Cluster.OptionalWritableAttribute)(
         68,
@@ -1179,7 +1804,7 @@ var Thermostat;
       /**
        * Indicates the position of Louver on the AC.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.50
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.49
        */
       acLouverPosition: (0, import_Cluster.OptionalWritableAttribute)(
         69,
@@ -1189,27 +1814,38 @@ var Thermostat;
       /**
        * Indicates the temperature of the AC coil, as measured locally or remotely (over the network).
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.51
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.50
        */
       acCoilTemperature: (0, import_Cluster.OptionalAttribute)(70, (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvInt16), { default: null }),
       /**
        * Indicates the format for the ACCapacity attribute.
        *
-       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.52
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.51
        */
       acCapacityFormat: (0, import_Cluster.OptionalWritableAttribute)(
         71,
         (0, import_TlvNumber.TlvEnum)(),
         { persistent: true, default: 0 /* BtUh */, writeAcl: import_model.AccessLevel.Manage }
+      ),
+      /**
+       * If there is a known time when the TemperatureSetpointHold shall be cleared, this attribute shall contain
+       * the timestamp in UTC indicating when that will happen. If there is no such known time, this attribute
+       * shall be null.
+       *
+       * If the TemperatureSetpointHold is set to SetpointHoldOff or the TemperatureSetpointHoldDuration is set
+       * to null, this attribute shall be set to null indicating there is no hold on the Thermostat either with
+       * or without a duration.
+       *
+       * @see {@link MatterSpecification.v13.Cluster} § 4.3.9.62
+       */
+      setpointHoldExpiryTimestamp: (0, import_Cluster.OptionalAttribute)(
+        82,
+        (0, import_TlvNullable.TlvNullable)(import_TlvNumber.TlvEpochS),
+        { persistent: true, default: null }
       )
     },
     commands: {
       /**
-       * Upon receipt, the attributes for the indicated setpoint(s) shall have the amount specified in the Amount
-       * field added to them. If the resulting value is outside the limits imposed by MinCoolSetpointLimit,
-       * MaxCoolSetpointLimit, MinHeatSetpointLimit and MaxHeatSetpointLimit, the value is clamped to those
-       * limits. This is not considered an error condition.
-       *
        * @see {@link MatterSpecification.v13.Cluster} § 4.3.10.1
        */
       setpointRaiseLower: (0, import_Cluster.Command)(0, Thermostat2.TlvSetpointRaiseLowerRequest, 0, import_Cluster.TlvNoResponse)
@@ -1229,6 +1865,8 @@ var Thermostat;
       { flags: { scheduleConfiguration: true }, component: Thermostat2.ScheduleConfigurationComponent },
       { flags: { setback: true }, component: Thermostat2.SetbackComponent },
       { flags: { setback: true, occupancy: true }, component: Thermostat2.SetbackAndOccupancyComponent },
+      { flags: { presets: true }, component: Thermostat2.PresetsComponent },
+      { flags: { matterScheduleConfiguration: true }, component: Thermostat2.MatterScheduleConfigurationComponent },
       { flags: { autoMode: true, heating: false }, component: false },
       { flags: { autoMode: true, cooling: false }, component: false },
       { flags: { heating: false, cooling: false }, component: false }
@@ -1245,6 +1883,8 @@ var Thermostat;
   const SCH = { scheduleConfiguration: true };
   const SB = { setback: true };
   const SB_OCC = { setback: true, occupancy: true };
+  const PRES = { presets: true };
+  const MSCH = { matterScheduleConfiguration: true };
   Thermostat2.CompleteInstance = (0, import_MutableCluster.MutableCluster)({
     id: Thermostat2.Base.id,
     name: Thermostat2.Base.name,
@@ -1356,6 +1996,40 @@ var Thermostat;
       unoccupiedSetbackMax: import_MutableCluster.MutableCluster.AsConditional(
         Thermostat2.SetbackAndOccupancyComponent.attributes.unoccupiedSetbackMax,
         { mandatoryIf: [SB_OCC] }
+      ),
+      presetTypes: import_MutableCluster.MutableCluster.AsConditional(Thermostat2.PresetsComponent.attributes.presetTypes, { mandatoryIf: [PRES] }),
+      scheduleTypes: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.scheduleTypes,
+        { mandatoryIf: [MSCH] }
+      ),
+      numberOfPresets: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.PresetsComponent.attributes.numberOfPresets,
+        { mandatoryIf: [PRES] }
+      ),
+      numberOfSchedules: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.numberOfSchedules,
+        { mandatoryIf: [MSCH] }
+      ),
+      numberOfScheduleTransitions: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.numberOfScheduleTransitions,
+        { mandatoryIf: [MSCH] }
+      ),
+      numberOfScheduleTransitionPerDay: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.numberOfScheduleTransitionPerDay,
+        { mandatoryIf: [MSCH] }
+      ),
+      activePresetHandle: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.PresetsComponent.attributes.activePresetHandle,
+        { mandatoryIf: [PRES] }
+      ),
+      activeScheduleHandle: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.activeScheduleHandle,
+        { mandatoryIf: [MSCH] }
+      ),
+      presets: import_MutableCluster.MutableCluster.AsConditional(Thermostat2.PresetsComponent.attributes.presets, { mandatoryIf: [PRES] }),
+      schedules: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.attributes.schedules,
+        { mandatoryIf: [MSCH] }
       )
     },
     commands: {
@@ -1371,6 +2045,14 @@ var Thermostat;
       clearWeeklySchedule: import_MutableCluster.MutableCluster.AsConditional(
         Thermostat2.ScheduleConfigurationComponent.commands.clearWeeklySchedule,
         { mandatoryIf: [SCH] }
+      ),
+      setActiveScheduleRequest: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.MatterScheduleConfigurationComponent.commands.setActiveScheduleRequest,
+        { mandatoryIf: [MSCH] }
+      ),
+      setActivePresetRequest: import_MutableCluster.MutableCluster.AsConditional(
+        Thermostat2.PresetsComponent.commands.setActivePresetRequest,
+        { mandatoryIf: [PRES] }
       )
     }
   });