@matter/types 0.13.0-alpha.0-20250304-d4a7592a4 → 0.13.0-alpha.0-20250307-ebf84a05a

package/dist/esm/clusters/device-energy-management.js

@@ -5,8 +5,8 @@
  */
 import { MutableCluster } from "../cluster/mutation/MutableCluster.js";
 import { Attribute, Command, TlvNoResponse, Event, EventPriority, FixedAttribute } from "../cluster/Cluster.js";
-import { TlvArray } from "../tlv/TlvArray.js";
 import { TlvField, TlvObject, TlvOptionalField } from "../tlv/TlvObject.js";
+import { TlvArray } from "../tlv/TlvArray.js";
 import { TlvInt64, TlvUInt32, TlvEnum, TlvUInt16, TlvEpochS, TlvInt32, TlvUInt8, TlvInt8 } from "../tlv/TlvNumber.js";
 import { TlvNullable } from "../tlv/TlvNullable.js";
 import { TlvNoArguments } from "../tlv/TlvNoArguments.js";
@@ -29,34 +29,30 @@ var DeviceEnergyManagement;
     /**
      * This field shall indicate the minimum power that the ESA can have its power adjusted to.
      *
-     * Note that this is a signed value. Negative values indicate power flows away from loads (e.g. charging a
-     * battery inverter).
-     *
-     * MinPower shall be less than MaxPower.
+     * Note that this is a signed value. Negative values indicate power flows out of the node (e.g. discharging a
+     * battery).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.1
      */
     minPower: TlvField(0, TlvInt64),
     /**
      * This field shall indicate the maximum power that the ESA can have its power adjusted to.
      *
-     * Note that this is a signed value. Negative values indicate power flows away from loads (e.g. charging a
-     * battery inverter).
-     *
-     * MinPower shall be less than MaxPower.
+     * Note that this is a signed value. Negative values indicate power flows out of the node (e.g. discharging a
+     * battery).
      *
      * For example, if the charging current of an EVSE can be adjusted within the range of 6A to 32A on a 230V
      * supply, then the power adjustment range is between 1380W and 7360W. Here the MinPower would be 1380W, and
      * MaxPower would be 7360W.
      *
-     * For example, if a battery storage inverter can discharge between 0 to 3000W towards a load, then its
-     * MinPower would be 0W and its MaxPower would be 3000W.
+     * For example, if a battery storage inverter can discharge between 0 to 3000W towards a load, then power is
+     * flowing out of the node and is therefore negative. Its MinPower would be -3000W and its MaxPower would be 0W.
      *
      * In another example, if a battery storage inverter can charge its internal battery, between 0W and 2000W.
-     * Here power is flowing away from the home loads, so the power values need to be negative. As such the
-     * MinPower becomes -2000W and MaxPower becomes 0W.
+     * Here power is flowing into the node when charging. As such the MinPower becomes 0W and MaxPower becomes
+     * 2000W.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.2
      */
     maxPower: TlvField(1, TlvInt64),
     /**
@@ -64,9 +60,7 @@ var DeviceEnergyManagement;
      * adjustment. Manufacturers may use this to as an anti-cycling capability to avoid controllers from rapidly
      * making power adjustments.
      *
-     * Note that MinDuration shall be less than MaxDuration.
-     *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.3
      */
     minDuration: TlvField(2, TlvUInt32),
     /**
@@ -74,12 +68,38 @@ var DeviceEnergyManagement;
      * adjustment. Manufacturers may use this to protect the user experience, to avoid over heating of the ESA,
      * ensuring that there is sufficient headroom to use or store energy in the ESA or for any other reason.
      *
-     * Note that MinDuration shall be less than MaxDuration.
-     *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.4
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.4
      */
     maxDuration: TlvField(3, TlvUInt32)
   });
+  let PowerAdjustReason;
+  ((PowerAdjustReason2) => {
+    PowerAdjustReason2[PowerAdjustReason2["NoAdjustment"] = 0] = "NoAdjustment";
+    PowerAdjustReason2[PowerAdjustReason2["LocalOptimizationAdjustment"] = 1] = "LocalOptimizationAdjustment";
+    PowerAdjustReason2[PowerAdjustReason2["GridOptimizationAdjustment"] = 2] = "GridOptimizationAdjustment";
+  })(PowerAdjustReason = DeviceEnergyManagement2.PowerAdjustReason || (DeviceEnergyManagement2.PowerAdjustReason = {}));
+  DeviceEnergyManagement2.TlvPowerAdjustCapability = TlvObject({
+    /**
+     * This field shall indicate how the ESA can be adjusted at the current time.
+     *
+     * For example, a battery storage inverter may need to regulate its internal temperature, or the charging rate
+     * of the battery may be limited due to cold temperatures, or a change in the state of charge of the battery
+     * may mean that the maximum charging or discharging rate is limited.
+     *
+     * An empty list shall indicate that no power adjustment is currently possible.
+     *
+     * Multiple entries in the list allow indicating that permutations of scenarios may be possible.
+     *
+     * For example, a 10kWh battery could be at 80% state of charge. If charging at 2kW, then it would be full in 1
+     * hour. However, it could be discharged at 2kW for 4 hours.
+     *
+     * In this example the list of PowerAdjustStructs allows multiple scenarios to be offered as follows:
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.12
+     */
+    powerAdjustCapability: TlvField(0, TlvNullable(TlvArray(DeviceEnergyManagement2.TlvPowerAdjust, { maxLength: 8 }))),
+    cause: TlvField(1, TlvEnum())
+  });
   let AdjustmentCause;
   ((AdjustmentCause2) => {
     AdjustmentCause2[AdjustmentCause2["LocalOptimization"] = 0] = "LocalOptimization";
@@ -135,9 +155,9 @@ var DeviceEnergyManagement;
     /**
      * This field shall indicate the approximate energy used by the ESA during the session.
      *
-     * For example, if the ESA was on and was adjusted to be switched off, then this shall be 0W. If this was a
-     * battery inverter that was requested to charge it would have a negative energy use. If this was a normal load
-     * that was turned on, then it will have positive value.
+     * For example, if the ESA was on and was adjusted to be switched off, then this shall be 0 mWh. If this was a
+     * battery inverter that was requested to discharge it would have a negative EnergyUse value. If this was a
+     * normal load that was turned on, then it will have positive value.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 9.2.10.2.3
      */
@@ -154,7 +174,7 @@ var DeviceEnergyManagement;
     /**
      * This field shall indicate the type of cost being represented (see CostTypeEnum).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.8.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.1
      */
     costType: TlvField(0, TlvEnum()),
     /**
@@ -163,14 +183,14 @@ var DeviceEnergyManagement;
      *
      * For example, if the Value was -302 and DecimalPoints was 2, then this would represent a benefit of 3.02.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.8.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.2
      */
     value: TlvField(1, TlvInt32),
     /**
      * This field shall indicate the number of digits to the right of the decimal point in the Value field. For
      * example, if the Value was 102 and DecimalPoints was 2, then this would represent a cost of 1.02.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.8.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.3
      */
     decimalPoints: TlvField(2, TlvUInt8),
     /**
@@ -179,7 +199,7 @@ var DeviceEnergyManagement;
      *
      * This is an optional field. It shall be included if CostType is Financial.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.8.4
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.9.4
      */
     currency: TlvOptionalField(3, TlvUInt16.bound({ max: 999 }))
   });
@@ -187,19 +207,19 @@ var DeviceEnergyManagement;
     /**
      * This field shall indicate the minimum time (in seconds) that the appliance expects to be in this slot for.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.1
      */
     minDuration: TlvField(0, TlvUInt32),
     /**
      * This field shall indicate the maximum time (in seconds) that the appliance expects to be in this slot for.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.2
      */
     maxDuration: TlvField(1, TlvUInt32),
     /**
      * This field shall indicate the expected time (in seconds) that the appliance expects to be in this slot for.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.3
      */
     defaultDuration: TlvField(2, TlvUInt32),
     /**
@@ -212,7 +232,7 @@ var DeviceEnergyManagement;
      *
      * When the Forecast attribute is read, then this value shall be the most recent value.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.4
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.4
      */
     elapsedSlotTime: TlvField(3, TlvUInt32),
     /**
@@ -224,26 +244,31 @@ var DeviceEnergyManagement;
      * When subscribed to, a change in this field value shall NOT cause the Forecast attribute to be updated, since
      * this value may change every 1 second.
      *
-     * Note that if the ESA is currently paused, then this value shall not change.
+     * Note that if the ESA is currently paused, then this value shall NOT change.
      *
      * When the Forecast attribute is read, then this value shall be the most recent value.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.5
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.5
      */
     remainingSlotTime: TlvField(4, TlvUInt32),
-    slotIsPauseable: TlvOptionalField(5, TlvBoolean),
+    /**
+     * This field shall indicate whether this slot can be paused.
+     *
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.6
+     */
+    slotIsPausable: TlvOptionalField(5, TlvBoolean),
     /**
      * This field shall indicate the shortest period that the slot can be paused for. This can be set to avoid
      * controllers trying to pause ESAs for short periods and then resuming operation in a cyclic fashion which may
      * damage or cause excess energy to be consumed with restarting of an operation.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.7
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.7
      */
     minPauseDuration: TlvOptionalField(6, TlvUInt32),
     /**
      * This field shall indicate the longest period that the slot can be paused for.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.8
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.8
      */
     maxPauseDuration: TlvOptionalField(7, TlvUInt32),
     /**
@@ -262,11 +287,11 @@ var DeviceEnergyManagement;
      * NOTE An ESA shall always use the same value to represent the same operating state.
      *
      * By providing this information a smart EMS may be able to learn the observed power draw when the ESA is put
-     * into a specific state. It can potentially then use the information in the PowerForecastReporting data to
-     * predict the power draw from the appliance and potentially ask it to modify its timing via one of the
-     * adjustment request commands, or adjust other ESAs power to compensate.
+     * into a specific state. It can potentially then use the ManufacturerESAState field in the Forecast attribute
+     * along with observed power drawn to predict the power draw from the appliance and potentially ask it to
+     * modify its timing via one of the adjustment request commands, or adjust other ESAs power to compensate.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.9
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.9
      */
     manufacturerEsaState: TlvOptionalField(8, TlvUInt16),
     /**
@@ -274,7 +299,7 @@ var DeviceEnergyManagement;
      * considered the average value over the slot, and some variation from this would be expected (for example, as
      * it is ramping up).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.10
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.10
      */
     nominalPower: TlvOptionalField(9, TlvInt64),
     /**
@@ -283,7 +308,7 @@ var DeviceEnergyManagement;
      *
      * Some appliances (e.g. battery inverters which can charge and discharge) may have a negative power.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.11
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.11
      */
     minPower: TlvOptionalField(10, TlvInt64),
     /**
@@ -292,7 +317,7 @@ var DeviceEnergyManagement;
      *
      * Some appliances (e.g. battery inverters which can charge and discharge) may have a negative power.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.12
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.12
      */
     maxPower: TlvOptionalField(11, TlvInt64),
     /**
@@ -300,7 +325,7 @@ var DeviceEnergyManagement;
      *
      * Some appliances (e.g. battery inverters which can charge and discharge) may have a negative energy.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.13
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.13
      */
     nominalEnergy: TlvOptionalField(12, TlvInt64),
     /**
@@ -323,7 +348,7 @@ var DeviceEnergyManagement;
      * If the ESA cannot calculate its cost for any reason (such as losing its connection to a Price server) it may
      * omit this field. This is treated as extra meta data that an EMS may use to optimize a system.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.14
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.14
      */
     costs: TlvOptionalField(13, TlvArray(DeviceEnergyManagement2.TlvCost, { maxLength: 5 })),
     /**
@@ -333,7 +358,7 @@ var DeviceEnergyManagement;
      * If the slot indicates a NominalPower of 0W (indicating it is expecting to be off), this allows an ESA to
      * indicate it could be switched on to charge, but this would be the minimum power limit it can be set to.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.15
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.15
      */
     minPowerAdjustment: TlvOptionalField(14, TlvInt64),
     /**
@@ -343,7 +368,7 @@ var DeviceEnergyManagement;
      * the slot indicates a NominalPower of 0W (indicating it is expecting to be off), this allows an ESA to
      * indicate it could be switched on to charge, but this would be the maximum power limit it can be set to.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.16
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.16
      */
     maxPowerAdjustment: TlvOptionalField(15, TlvInt64),
     /**
@@ -355,7 +380,7 @@ var DeviceEnergyManagement;
      *
      * For example, a heat pump compressor may have a minimum cycle time of order a few minutes.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.17
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.17
      */
     minDurationAdjustment: TlvOptionalField(16, TlvUInt32),
     /**
@@ -367,7 +392,7 @@ var DeviceEnergyManagement;
      * which can be discharged, it may equally indicate the maximum time the battery could be discharged for (at
      * the MaxPowerAdjustment power level).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.11.18
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.14.18
      */
     maxDurationAdjustment: TlvOptionalField(17, TlvUInt32)
   });
@@ -386,36 +411,35 @@ var DeviceEnergyManagement;
      * previous subscriptions are lost if a device reboots. The loss of a subscription and subsequent
      * re-subscription allows the EMS to learn about any new forecasts.
      *
-     * The value of ForecastId is allowed to wrap.
+     * The value of ForecastID is allowed to wrap.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.1
      */
-    forecastId: TlvField(0, TlvUInt16),
+    forecastId: TlvField(0, TlvUInt32),
     /**
      * This field shall indicate which element of the Slots list is currently active in the Forecast sequence. A
      * null value indicates that the sequence has not yet started.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.2
      */
     activeSlotNumber: TlvField(1, TlvNullable(TlvUInt16)),
     /**
      * This field shall indicate the planned start time, in UTC, for the entire Forecast.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.3
      */
     startTime: TlvField(2, TlvEpochS),
     /**
      * This field shall indicate the planned end time, in UTC, for the entire Forecast.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.4
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.4
      */
     endTime: TlvField(3, TlvEpochS),
     /**
-     * This field shall indicate the earliest start time, in UTC, that the entire Forecast can be shifted to.
+     * This field shall indicate the earliest start time, in UTC, that the entire Forecast can be shifted to. A
+     * null value indicates that it can be started immediately.
      *
-     * A null value indicates that it can be started immediately.
-     *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.5
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.5
      */
     earliestStartTime: TlvOptionalField(4, TlvNullable(TlvEpochS)),
     /**
@@ -424,7 +448,7 @@ var DeviceEnergyManagement;
      * e.g. for an EVSE charging session, this may indicate the departure time for the vehicle, by which time the
      * charging session must end.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.6
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.6
      */
     latestEndTime: TlvOptionalField(5, TlvEpochS),
     /**
@@ -432,21 +456,21 @@ var DeviceEnergyManagement;
      * this flag and if it is false, then none of the slots contain SlotIsPausable set to true. This can save a
      * client from having to check each slot in the list.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.7
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.7
      */
-    isPauseable: TlvField(6, TlvBoolean),
+    isPausable: TlvField(6, TlvBoolean),
     /**
      * This field shall contain a list of SlotStructs.
      *
      * It shall contain at least 1 entry, and a maximum of 10.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.8
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.8
      */
     slots: TlvField(7, TlvArray(DeviceEnergyManagement2.TlvSlot, { maxLength: 10 })),
     /**
      * This field shall contain the reason the current Forecast was generated.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.10.9
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.9
      */
     forecastUpdateReason: TlvField(8, TlvEnum())
   });
@@ -508,35 +532,38 @@ var DeviceEnergyManagement;
      * be less than the actual length of the Slots list (implicitly it must be in the range 0 to 9 based on the
      * maximum length of the Slots list constraint).
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.12.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.15.1
      */
     slotIndex: TlvField(0, TlvUInt8),
     /**
      * This field shall indicate the new requested power that the ESA shall operate at. It MUST be between the
-     * MinPowerAdjustment and MaxPowerAdjustment for the slot as advertised by the ESA.
+     * AbsMinPower and AbsMaxPower attributes as advertised by the ESA if it supports PFR.
+     *
+     * This is a signed value and can be used to indicate charging or discharging. If the ESA does NOT support PFR
+     * this value shall be ignored by the ESA.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.12.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.15.2
      */
-    nominalPower: TlvField(1, TlvInt64),
+    nominalPower: TlvOptionalField(1, TlvInt64),
     /**
      * This field shall indicate the new requested duration, in seconds, that the ESA shall extend or shorten the
      * slot duration to. It MUST be between the MinDurationAdjustment and MaxDurationAdjustment for the slot as
      * advertised by the ESA.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.12.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.15.3
      */
     duration: TlvField(2, TlvUInt32)
   });
   DeviceEnergyManagement2.TlvModifyForecastRequest = TlvObject({
     /**
-     * This field shall indicate the ForecastId that is to be modified.
+     * This field shall indicate the ForecastID that is to be modified.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 9.2.9.6.1
      */
     forecastId: TlvField(0, TlvUInt32),
     /**
      * This field shall contain a list of SlotAdjustment parameters that should be modified in the corresponding
-     * Forecast with matching ForecastId.
+     * Forecast with matching ForecastID.
      *
      * @see {@link MatterSpecification.v13.Cluster} § 9.2.9.6.2
      */
@@ -555,34 +582,32 @@ var DeviceEnergyManagement;
      *
      * This value is in UTC and MUST be in the future.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.1
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.16.1
      */
     startTime: TlvField(0, TlvEpochS),
     /**
      * This field shall indicate the duration of the constraint in seconds.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.2
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.16.2
      */
-    duration: TlvField(1, TlvUInt32.bound({ min: 0, max: 86400 })),
+    duration: TlvField(1, TlvUInt32.bound({ max: 86400 })),
     /**
      * This field shall indicate the nominal power that client wishes the ESA to operate at during the constrained
      * period. It MUST be between the AbsMinPower and AbsMaxPower attributes as advertised by the ESA if it
      * supports PFR.
      *
-     * This is a signed value and can be used to indicate charging or discharging. If the ESA does NOT support PFR
-     * this value shall be ignored by the ESA.
+     * This is a signed value and can be used to indicate charging or discharging.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.3
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.16.3
      */
     nominalPower: TlvOptionalField(2, TlvInt64),
     /**
      * This field shall indicate the maximum energy that can be transferred to or from the ESA during the
      * constraint period.
      *
-     * This is a signed value and can be used to indicate charging or discharging. If the ESA does NOT support PFR
-     * this value may be ignored by the ESA.
+     * This is a signed value and can be used to indicate charging or discharging.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.4
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.16.4
      */
     maximumEnergy: TlvOptionalField(3, TlvInt64),
     /**
@@ -595,14 +620,15 @@ var DeviceEnergyManagement;
      *
      * Note that the mapping between values and operation is manufacturer specific.
      *
-     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.13.5
+     * @see {@link MatterSpecification.v13.Cluster} § 9.2.7.16.5
      */
     loadControl: TlvOptionalField(4, TlvInt8)
   });
   DeviceEnergyManagement2.TlvRequestConstraintBasedForecastRequest = TlvObject({
     /**
      * This field shall indicate the series of turn up or turn down power requests that the ESA is being asked to
-     * constrain its operation within.
+     * constrain its operation within. These requests shall be in the future, shall be in chronological order,
+     * starting with the earliest start time, and shall NOT overlap in time.
      *
      * For example, a grid event which requires devices to reduce power (turn down) between 4pm and 6pm and due to
      * excess power on the grid overnight, may request ESAs to increase their power demand (turn up) between
@@ -611,8 +637,9 @@ var DeviceEnergyManagement;
      * If this ESA supports PFR this would have 2 entries in the list as follows:
      *
      * If this ESA supports SFR where it does not know the actual power, but has an understanding of the functions
-     * that use more energy, it could be requested to use more or less energy using the LoadControl field as
-     * follows:
+     * that use more energy, it could be requested to use more or less energy using the LoadCon
+     *
+     * trol field as follows:
      *
      * @see {@link MatterSpecification.v13.Cluster} § 9.2.9.7.1
      */
@@ -653,29 +680,23 @@ var DeviceEnergyManagement;
   DeviceEnergyManagement2.PowerAdjustmentComponent = MutableCluster.Component({
     attributes: {
       /**
-       * Indicates how the ESA can be adjusted at the current time. This attribute SHOULD be updated regularly by
-       * ESAs.
+       * Indicates how the ESA can be adjusted at the current time, and the state of any active adjustment.
        *
-       * For example, a battery storage inverter may need to regulate its internal temperature, or the charging
-       * rate of the battery may be limited due to cold temperatures, or a change in the state of charge of the
-       * battery may mean that the maximum charging or discharging rate is limited.
+       * A null value indicates that no power adjustment is currently possible, and nor is any adjustment
+       * currently active.
        *
-       * An empty list shall indicate that no power adjustment is currently possible.
+       * This attribute SHOULD be updated periodically by ESAs to reflect any changes in internal state, for
+       * example temperature or stored energy, which would affect the power or duration limits.
        *
-       * Multiple entries in the list allow to indicate that permutations of scenarios may be possible.
+       * Changes to this attribute shall only be marked as reportable in the following cases:
        *
-       * For example, a 10kWh battery could be at 80% state of charge. If charging at 2kW, then it would be full
-       * in 1 hour. However, it could be discharged at 2kW for 4 hours.
+       *   • At most once every 10 seconds on changes, or
        *
-       * In this example the list of PowerAdjustStructs allows multiple scenarios to be offered as follows:
+       *   • When it changes from null to any other value and vice versa.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.8.6
        */
-      powerAdjustmentCapability: Attribute(
-        5,
-        TlvNullable(TlvArray(DeviceEnergyManagement2.TlvPowerAdjust, { maxLength: 8 })),
-        { default: null }
-      )
+      powerAdjustmentCapability: Attribute(5, TlvNullable(DeviceEnergyManagement2.TlvPowerAdjustCapability), { default: null })
     },
     commands: {
       /**
@@ -712,13 +733,23 @@ var DeviceEnergyManagement;
        * This attribute allows an ESA to share its intended forecast with a client (such as an Energy Management
        * System).
        *
-       * A null value indicates that there is no forecast currently available
-       *
-       * yet been selected by the user).
+       * A null value indicates that there is no forecast currently available (for example, a program has not yet
+       * been selected by the user).
        *
        * A server may reset this value attribute to null on a reboot, and it does not need to persist any
        * previous forecasts.
        *
+       * Changes to this attribute shall only be marked as reportable in the following cases:
+       *
+       *   • At most once every 10 seconds on changes, or
+       *
+       *   • When it changes from null to any other value and vice versa, or
+       *
+       *   • As a result of a command which causes the forecast to be updated, or
+       *
+       *   • As a result of a change in the opt-out status which in turn may cause the ESA to recalculate its
+       *     forecast.
+       *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.8.7
        */
       forecast: Attribute(6, TlvNullable(DeviceEnergyManagement2.TlvForecast), { default: null })
@@ -735,8 +766,29 @@ var DeviceEnergyManagement;
        * optimization reasons, it shall reject any commands which have the AdjustmentCauseEnum value
        * LocalOptimization. If the ESA is in the GridOptOut or OptOut states, so it cannot be controlled by an
        * EMS for grid optimization reasons, it shall reject any commands which have the AdjustmentCauseEnum value
-       * GridOptimization. If the ESA is in the LocalOptOut, GridOptOut, or NoOptOut states, the device is still
-       * permitted to optimize its own energy usage, for example, using tariff information it may obtain.
+       * GridOptimization.
+       *
+       * If the user changes the Opt-Out state of the ESA which is currently operating with a Forecast that is
+       * due to a previous StartTimeAdjustRequest, ModifyForecastRequest or RequestConstraintBasedForecast
+       * command that would now not be permitted due to the new Opt-out state
+       *
+       * attribute ForecastUpdateReason field currently contains a reason which is now opted out), the ESA shall
+       * behave as if it had received a CancelRequest command.
+       *
+       * If the user changes the Opt-Out state of the ESA which currently has the ESAStateEnum with value Paused
+       * due to a previous PauseRequest command that would now not be permitted due to the new Opt-out state, and
+       * the ESA supports the PFR or SFR features (i.e. the Forecast attribute ForecastUpdateReason field
+       * currently contains a reason which is now opted out), the ESA shall behave as if it had received a
+       * ResumeRequest command.
+       *
+       * If the user changes the Opt-Out state of the ESA which currently has the ESAStateEnum with value
+       * PowerAdjustActive due to a previous PowerAdjustRequest command that would now not be permitted due to
+       * the new Opt-out state (i.e. the Forecast attribute ForecastUpdateReason field currently contains a
+       * reason which is now opted out), the ESA shall behave as if it had received a CancelPowerAdjustRequest
+       * command.
+       *
+       * If the ESA is in the LocalOptOut, GridOptOut, or NoOptOut states, the device is still permitted to
+       * optimize its own energy usage, for example, using tariff information it may obtain.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.8.8
        */
@@ -818,7 +870,7 @@ var DeviceEnergyManagement;
   DeviceEnergyManagement2.Base = MutableCluster.Component({
     id: 152,
     name: "DeviceEnergyManagement",
-    revision: 3,
+    revision: 4,
     features: {
       /**
        * PowerAdjustment
@@ -828,14 +880,15 @@ var DeviceEnergyManagement;
        * be to curtail power requirements during peak periods, but can also be used to turn on an ESA if there is
        * excess renewable or local generation (Solar PV).
        *
-       * For example, a home may have solar PV which often produces more power than the home requires,
-       *
-       * resulting in the excess power flowing into the grid. This excess power naturally fluctuates when clouds
-       * pass overhead and other loads in the home are switched on and off.
+       * For example, a home may have solar PV which often produces more power than the home requires, resulting
+       * in the excess power flowing into the grid. This excess power naturally fluctuates when clouds pass
+       * overhead and other loads in the home are switched on and off.
        *
        * EVSE Example: An EMS may therefore be able to turn on the EVSE (if the vehicle is plugged in) and can
        * start charging the vehicle, and periodically modify the charging power depending on PV generation and
-       * other home loads, so as to minimize import and export to the grid.
+       * other home loads, so as to minimize import and export to the grid. An EMS may also use this feature to
+       * control the discharging (and re-charging) of the vehicle if the EVSE and vehicle support the V2X feature
+       * of the EVSE cluster of the associated EVSE device.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.4.1
        */
@@ -931,8 +984,9 @@ var DeviceEnergyManagement;
       /**
        * Pausable
        *
-       * ESAs which support the Pausable feature, allow an EMS to recommend a pause in the middle of a forecast
-       * power profile that the ESA is currently using.
+       * ESAs which support the Pausable feature, allow an EMS to recommend a pause in the middle of a
+       *
+       * forecast power profile that the ESA is currently using.
        *
        * Washing machine example: A Washing Machine is in operation, and starting its water heating step.
        *
@@ -988,8 +1042,9 @@ var DeviceEnergyManagement;
        *
        * ESAs which support the Constraint-Based Adjustment feature allow an EMS to inform the ESA of periods
        * during which power usage should be modified (for example when the EMS has been made aware that the grid
-       * supplier has requested reduced energy usage due to overall peak grid demand) and may cause the ESA to
-       * modify the intended power profile has previously suggested it would use.
+       * supplier has requested reduced energy usage due to overall peak grid demand)
+       *
+       * and may cause the ESA to modify the intended power profile has previously suggested it would use.
        *
        * EVSE example: An EVSE scheduling system may have determined that the vehicle would be charged starting
        * at a moderate rate at 1am, so that it has enough charge by the time it is needed later that morning.
@@ -997,9 +1052,8 @@ var DeviceEnergyManagement;
        * However, the DSR service provider has informed the EMS that due to high forecast winds it is now
        * forecast that there will be very cheap energy available from wind generation between 2am and 3am.
        *
-       * The EMS first requests the Forecast data from each of its registered ESAs. It determines that the
-       *
-       * EVSE has a power profile suggesting it plans to start charging the vehicle at 1am.
+       * The EMS first requests the Forecast data from each of its registered ESAs. It determines that the EVSE
+       * has a power profile suggesting it plans to start charging the vehicle at 1am.
        *
        * The EMS can then try to reduce the cost of charging the EV by informing the EVSE of the desire to
        * increase the charging between scheduled times.
@@ -1035,17 +1089,17 @@ var DeviceEnergyManagement;
        * the power values reported by the ESA need to have their sign inverted when dealing with forecasts and
        * adjustments.
        *
-       * For example, a solar PV inverter (being a generator) may produce positive values to indicate generation,
-       * however an EMS when predicting the total home load would need to subtract these positive values from the
-       * loads to compute a net import at the grid meter.
+       * For example, a solar PV inverter (being a generator) may produce negative values to indicate generation
+       * (since power is flowing out of the node into the home), however a display showing the power to the
+       * consumers may need to present a positive solar production value to the consumer.
        *
        * For example, a home battery storage system (BESS) which needs to charge the battery and then discharge
        * to the home loads, would be classed as a generator. These types of devices shall have this field set to
        * true. When generating its forecast or advertising its PowerAdjustmentCapability, the power values shall
-       * be positive to indicate discharging to the loads in the home, and negative to indicate when it is
+       * be negative to indicate discharging to the loads in the home, and positive to indicate when it is
        * charging its battery.
        *
-       * GRID meter = Σ LoadPowers - Σ GeneratorPowers
+       * GRID meter = Σ LoadPowers + Σ GeneratorPowers
        *
        * Example:
        *
@@ -1070,9 +1124,11 @@ var DeviceEnergyManagement;
        * Indicates the minimum electrical power that the ESA can consume when switched on. This does not include
        * when in power save or standby modes.
        *
-       * Note that for Generator ESAs that can charge an internal battery (such as a battery storage inverter),
-       * the AbsMinPower will be a negative number representing the maximum power that the ESA can charge its
-       * internal battery.
+       * NOTE
+       *
+       * For Generator ESAs that can discharge an internal battery (such as a battery storage inverter) to loads
+       * in the home, the AbsMinPower will be a negative number representing the maximum power that the ESA can
+       * discharge its internal battery.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.8.4
        */
@@ -1080,16 +1136,12 @@ var DeviceEnergyManagement;
       /**
        * Indicates the maximum electrical power that the ESA can consume when switched on.
        *
-       * The value of the AbsMaxPower attribute shall be limited
-       *
-       * AbsMaxPower >= AbsMinPower
-       *
-       * Note that for Generator ESAs that can discharge a battery to loads in the home (such as a battery
-       * storage inverter), the AbsMaxPower will be a positive number representing the maximum power at which the
-       * ESA can discharge its internal battery.
+       * Note that for Generator ESAs that can charge a battery by importing power into the node (such as a
+       * battery storage inverter), the AbsMaxPower will be a positive number representing the maximum power at
+       * which the ESA can charge its internal battery.
        *
        * For example, a battery storage inverter that can charge its battery at a maximum power of 2000W and can
-       * discharge the battery at a maximum power of 3000W, would have a AbsMinPower: -2000, AbsMaxPower: 3000W.
+       * discharge the battery at a maximum power of 3000W, would have a AbsMinPower: -3000, AbsMaxPower: 2000W.
        *
        * @see {@link MatterSpecification.v13.Cluster} § 9.2.8.5
        */
@@ -1145,32 +1197,9 @@ var DeviceEnergyManagement;
         flags: { constraintBasedAdjustment: true },
         component: DeviceEnergyManagement2.StartTimeAdjustmentOrForecastAdjustmentOrConstraintBasedAdjustmentComponent
       },
-      { flags: { feature: false, startTimeAdjustment: true, stateForecastReporting: false }, component: false },
-      { flags: { feature: false, pausable: true, stateForecastReporting: false }, component: false },
-      { flags: { feature: false, forecastAdjustment: true, stateForecastReporting: false }, component: false },
-      {
-        flags: { feature: false, constraintBasedAdjustment: true, stateForecastReporting: false },
-        component: false
-      },
-      { flags: { feature: false, startTimeAdjustment: true, powerForecastReporting: false }, component: false },
-      { flags: { feature: false, pausable: true, powerForecastReporting: false }, component: false },
-      { flags: { feature: false, forecastAdjustment: true, powerForecastReporting: false }, component: false },
-      {
-        flags: { feature: false, constraintBasedAdjustment: true, powerForecastReporting: false },
-        component: false
-      },
-      {
-        flags: {
-          powerAdjustment: false,
-          powerForecastReporting: false,
-          stateForecastReporting: false,
-          startTimeAdjustment: false,
-          pausable: false,
-          forecastAdjustment: false,
-          constraintBasedAdjustment: false
-        },
-        component: false
-      }
+      { flags: { staTrue: true, pauTrue: false, faTrue: false, conTrue: false }, component: false },
+      { flags: { powerForecastReporting: true, stateForecastReporting: true }, component: false },
+      { flags: { powerForecastReporting: false, stateForecastReporting: false }, component: false }
     )
   });
   DeviceEnergyManagement2.ClusterInstance = MutableCluster.ExtensibleOnly(DeviceEnergyManagement2.Base);