@mapgis/mapbox-gl 16.0.0 → 16.2.0

package/src/shaders/index.js

@@ -1,20 +0,0 @@
-// This file is intended for use in the GL-JS test suite
-// It provides the shaders entry point for Node (tests and GL Native)
-// In a browser environment, this file is replaced with ./src/shaders/shaders.js
-// when Rollup builds the main bundle.
-// See https://github.com/mapbox/mapbox-gl-js/blob/master/package.json#L104-L108
-
-/* eslint-disable import/unambiguous, import/no-commonjs, flowtype/require-valid-file-annotation, no-global-assign */
-
-const fs = require('fs');
-
-// enable ES Modules in Node
-require = require("esm")(module);
-
-// enable requiring GLSL in Node
-require.extensions['.glsl'] = function (module, filename) {
-    const content = fs.readFileSync(filename, 'utf8');
-    module._compile(`module.exports = \`${content}\``, filename);
-};
-
-module.exports = require("./shaders.js");

package/src/shaders/line.fragment.glsl

@@ -1,30 +0,0 @@
-uniform lowp float u_device_pixel_ratio;
-
-varying vec2 v_width2;
-varying vec2 v_normal;
-varying float v_gamma_scale;
-
-#pragma mapbox: define highp vec4 color
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-
-void main() {
-    #pragma mapbox: initialize highp vec4 color
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-
-    // Calculate the distance of the pixel from the line in pixels.
-    float dist = length(v_normal) * v_width2.s;
-
-    // Calculate the antialiasing fade factor. This is either when fading in
-    // the line in case of an offset line (v_width2.t) or when fading out
-    // (v_width2.s)
-    float blur2 = (blur + 1.0 / u_device_pixel_ratio) * v_gamma_scale;
-    float alpha = clamp(min(dist - (v_width2.t - blur2), v_width2.s - dist) / blur2, 0.0, 1.0);
-
-    gl_FragColor = color * (alpha * opacity);
-
-#ifdef OVERDRAW_INSPECTOR
-    gl_FragColor = vec4(1.0);
-#endif
-}

package/src/shaders/line.vertex.glsl

@@ -1,85 +0,0 @@
-// floor(127 / 2) == 63.0
-// the maximum allowed miter limit is 2.0 at the moment. the extrude normal is
-// stored in a byte (-128..127). we scale regular normals up to length 63, but
-// there are also "special" normals that have a bigger length (of up to 126 in
-// this case).
-// #define scale 63.0
-#define scale 0.015873016
-
-attribute vec2 a_pos_normal;
-attribute vec4 a_data;
-
-uniform mat4 u_matrix;
-uniform mediump float u_ratio;
-uniform vec2 u_units_to_pixels;
-uniform lowp float u_device_pixel_ratio;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying float v_gamma_scale;
-varying highp float v_linesofar;
-
-#pragma mapbox: define highp vec4 color
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-#pragma mapbox: define mediump float gapwidth
-#pragma mapbox: define lowp float offset
-#pragma mapbox: define mediump float width
-
-void main() {
-    #pragma mapbox: initialize highp vec4 color
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-    #pragma mapbox: initialize mediump float gapwidth
-    #pragma mapbox: initialize lowp float offset
-    #pragma mapbox: initialize mediump float width
-
-    // the distance over which the line edge fades out.
-    // Retina devices need a smaller distance to avoid aliasing.
-    float ANTIALIASING = 1.0 / u_device_pixel_ratio / 2.0;
-
-    vec2 a_extrude = a_data.xy - 128.0;
-    float a_direction = mod(a_data.z, 4.0) - 1.0;
-
-    v_linesofar = (floor(a_data.z / 4.0) + a_data.w * 64.0) * 2.0;
-
-    vec2 pos = floor(a_pos_normal * 0.5);
-
-    // x is 1 if it's a round cap, 0 otherwise
-    // y is 1 if the normal points up, and -1 if it points down
-    // We store these in the least significant bit of a_pos_normal
-    mediump vec2 normal = a_pos_normal - 2.0 * pos;
-    normal.y = normal.y * 2.0 - 1.0;
-    v_normal = normal;
-
-    // these transformations used to be applied in the JS and native code bases.
-    // moved them into the shader for clarity and simplicity.
-    gapwidth = gapwidth / 2.0;
-    float halfwidth = width / 2.0;
-    offset = -1.0 * offset;
-
-    float inset = gapwidth + (gapwidth > 0.0 ? ANTIALIASING : 0.0);
-    float outset = gapwidth + halfwidth * (gapwidth > 0.0 ? 2.0 : 1.0) + (halfwidth == 0.0 ? 0.0 : ANTIALIASING);
-
-    // Scale the extrusion vector down to a normal and then up by the line width
-    // of this vertex.
-    mediump vec2 dist = outset * a_extrude * scale;
-
-    // Calculate the offset when drawing a line that is to the side of the actual line.
-    // We do this by creating a vector that points towards the extrude, but rotate
-    // it when we're drawing round end points (a_direction = -1 or 1) since their
-    // extrude vector points in another direction.
-    mediump float u = 0.5 * a_direction;
-    mediump float t = 1.0 - abs(u);
-    mediump vec2 offset2 = offset * a_extrude * scale * normal.y * mat2(t, -u, u, t);
-
-    vec4 projected_extrude = u_matrix * vec4(dist / u_ratio, 0.0, 0.0);
-    gl_Position = u_matrix * vec4(pos + offset2 / u_ratio, 0.0, 1.0) + projected_extrude;
-
-    // calculate how much the perspective view squishes or stretches the extrude
-    float extrude_length_without_perspective = length(dist);
-    float extrude_length_with_perspective = length(projected_extrude.xy / gl_Position.w * u_units_to_pixels);
-    v_gamma_scale = extrude_length_without_perspective / extrude_length_with_perspective;
-
-    v_width2 = vec2(outset, inset);
-}

package/src/shaders/line_gradient.fragment.glsl

@@ -1,34 +0,0 @@
-uniform lowp float u_device_pixel_ratio;
-uniform sampler2D u_image;
-
-varying vec2 v_width2;
-varying vec2 v_normal;
-varying float v_gamma_scale;
-varying highp float v_lineprogress;
-
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-
-void main() {
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-
-    // Calculate the distance of the pixel from the line in pixels.
-    float dist = length(v_normal) * v_width2.s;
-
-    // Calculate the antialiasing fade factor. This is either when fading in
-    // the line in case of an offset line (v_width2.t) or when fading out
-    // (v_width2.s)
-    float blur2 = (blur + 1.0 / u_device_pixel_ratio) * v_gamma_scale;
-    float alpha = clamp(min(dist - (v_width2.t - blur2), v_width2.s - dist) / blur2, 0.0, 1.0);
-
-    // For gradient lines, v_lineprogress is the ratio along the entire line,
-    // scaled to [0, 2^15), and the gradient ramp is stored in a texture.
-    vec4 color = texture2D(u_image, vec2(v_lineprogress, 0.5));
-
-    gl_FragColor = color * (alpha * opacity);
-
-#ifdef OVERDRAW_INSPECTOR
-    gl_FragColor = vec4(1.0);
-#endif
-}

package/src/shaders/line_gradient.vertex.glsl

@@ -1,87 +0,0 @@
-
-// the attribute conveying progress along a line is scaled to [0, 2^15)
-#define MAX_LINE_DISTANCE 32767.0
-
-// floor(127 / 2) == 63.0
-// the maximum allowed miter limit is 2.0 at the moment. the extrude normal is
-// stored in a byte (-128..127). we scale regular normals up to length 63, but
-// there are also "special" normals that have a bigger length (of up to 126 in
-// this case).
-// #define scale 63.0
-#define scale 0.015873016
-
-attribute vec2 a_pos_normal;
-attribute vec4 a_data;
-
-uniform mat4 u_matrix;
-uniform mediump float u_ratio;
-uniform lowp float u_device_pixel_ratio;
-uniform vec2 u_units_to_pixels;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying float v_gamma_scale;
-varying highp float v_lineprogress;
-
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-#pragma mapbox: define mediump float gapwidth
-#pragma mapbox: define lowp float offset
-#pragma mapbox: define mediump float width
-
-void main() {
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-    #pragma mapbox: initialize mediump float gapwidth
-    #pragma mapbox: initialize lowp float offset
-    #pragma mapbox: initialize mediump float width
-
-    // the distance over which the line edge fades out.
-    // Retina devices need a smaller distance to avoid aliasing.
-    float ANTIALIASING = 1.0 / u_device_pixel_ratio / 2.0;
-
-    vec2 a_extrude = a_data.xy - 128.0;
-    float a_direction = mod(a_data.z, 4.0) - 1.0;
-
-    v_lineprogress = (floor(a_data.z / 4.0) + a_data.w * 64.0) * 2.0 / MAX_LINE_DISTANCE;
-
-    vec2 pos = floor(a_pos_normal * 0.5);
-
-    // x is 1 if it's a round cap, 0 otherwise
-    // y is 1 if the normal points up, and -1 if it points down
-    // We store these in the least significant bit of a_pos_normal
-    mediump vec2 normal = a_pos_normal - 2.0 * pos;
-    normal.y = normal.y * 2.0 - 1.0;
-    v_normal = normal;
-
-    // these transformations used to be applied in the JS and native code bases.
-    // moved them into the shader for clarity and simplicity.
-    gapwidth = gapwidth / 2.0;
-    float halfwidth = width / 2.0;
-    offset = -1.0 * offset;
-
-    float inset = gapwidth + (gapwidth > 0.0 ? ANTIALIASING : 0.0);
-    float outset = gapwidth + halfwidth * (gapwidth > 0.0 ? 2.0 : 1.0) + (halfwidth == 0.0 ? 0.0 : ANTIALIASING);
-
-    // Scale the extrusion vector down to a normal and then up by the line width
-    // of this vertex.
-    mediump vec2 dist = outset * a_extrude * scale;
-
-    // Calculate the offset when drawing a line that is to the side of the actual line.
-    // We do this by creating a vector that points towards the extrude, but rotate
-    // it when we're drawing round end points (a_direction = -1 or 1) since their
-    // extrude vector points in another direction.
-    mediump float u = 0.5 * a_direction;
-    mediump float t = 1.0 - abs(u);
-    mediump vec2 offset2 = offset * a_extrude * scale * normal.y * mat2(t, -u, u, t);
-
-    vec4 projected_extrude = u_matrix * vec4(dist / u_ratio, 0.0, 0.0);
-    gl_Position = u_matrix * vec4(pos + offset2 / u_ratio, 0.0, 1.0) + projected_extrude;
-
-    // calculate how much the perspective view squishes or stretches the extrude
-    float extrude_length_without_perspective = length(dist);
-    float extrude_length_with_perspective = length(projected_extrude.xy / gl_Position.w * u_units_to_pixels);
-    v_gamma_scale = extrude_length_without_perspective / extrude_length_with_perspective;
-
-    v_width2 = vec2(outset, inset);
-}

package/src/shaders/line_pattern.fragment.glsl

@@ -1,74 +0,0 @@
-uniform lowp float u_device_pixel_ratio;
-uniform vec2 u_texsize;
-uniform float u_fade;
-uniform mediump vec3 u_scale;
-
-uniform sampler2D u_image;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying float v_linesofar;
-varying float v_gamma_scale;
-varying float v_width;
-
-#pragma mapbox: define lowp vec4 pattern_from
-#pragma mapbox: define lowp vec4 pattern_to
-#pragma mapbox: define lowp float pixel_ratio_from
-#pragma mapbox: define lowp float pixel_ratio_to
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-
-void main() {
-    #pragma mapbox: initialize mediump vec4 pattern_from
-    #pragma mapbox: initialize mediump vec4 pattern_to
-    #pragma mapbox: initialize lowp float pixel_ratio_from
-    #pragma mapbox: initialize lowp float pixel_ratio_to
-
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-
-    vec2 pattern_tl_a = pattern_from.xy;
-    vec2 pattern_br_a = pattern_from.zw;
-    vec2 pattern_tl_b = pattern_to.xy;
-    vec2 pattern_br_b = pattern_to.zw;
-
-    float tileZoomRatio = u_scale.x;
-    float fromScale = u_scale.y;
-    float toScale = u_scale.z;
-
-    vec2 display_size_a = (pattern_br_a - pattern_tl_a) / pixel_ratio_from;
-    vec2 display_size_b = (pattern_br_b - pattern_tl_b) / pixel_ratio_to;
-
-    vec2 pattern_size_a = vec2(display_size_a.x * fromScale / tileZoomRatio, display_size_a.y);
-    vec2 pattern_size_b = vec2(display_size_b.x * toScale / tileZoomRatio, display_size_b.y);
-
-    float aspect_a = display_size_a.y / v_width;
-    float aspect_b = display_size_b.y / v_width;
-
-    // Calculate the distance of the pixel from the line in pixels.
-    float dist = length(v_normal) * v_width2.s;
-
-    // Calculate the antialiasing fade factor. This is either when fading in
-    // the line in case of an offset line (v_width2.t) or when fading out
-    // (v_width2.s)
-    float blur2 = (blur + 1.0 / u_device_pixel_ratio) * v_gamma_scale;
-    float alpha = clamp(min(dist - (v_width2.t - blur2), v_width2.s - dist) / blur2, 0.0, 1.0);
-
-    float x_a = mod(v_linesofar / pattern_size_a.x * aspect_a, 1.0);
-    float x_b = mod(v_linesofar / pattern_size_b.x * aspect_b, 1.0);
-
-    float y = 0.5 * v_normal.y + 0.5;
-
-    vec2 texel_size = 1.0 / u_texsize;
-
-    vec2 pos_a = mix(pattern_tl_a * texel_size - texel_size, pattern_br_a * texel_size + texel_size, vec2(x_a, y));
-    vec2 pos_b = mix(pattern_tl_b * texel_size - texel_size, pattern_br_b * texel_size + texel_size, vec2(x_b, y));
-
-    vec4 color = mix(texture2D(u_image, pos_a), texture2D(u_image, pos_b), u_fade);
-
-    gl_FragColor = color * alpha * opacity;
-
-#ifdef OVERDRAW_INSPECTOR
-    gl_FragColor = vec4(1.0);
-#endif
-}

package/src/shaders/line_pattern.vertex.glsl

@@ -1,99 +0,0 @@
-// floor(127 / 2) == 63.0
-// the maximum allowed miter limit is 2.0 at the moment. the extrude normal is
-// stored in a byte (-128..127). we scale regular normals up to length 63, but
-// there are also "special" normals that have a bigger length (of up to 126 in
-// this case).
-// #define scale 63.0
-#define scale 0.015873016
-
-// We scale the distance before adding it to the buffers so that we can store
-// long distances for long segments. Use this value to unscale the distance.
-#define LINE_DISTANCE_SCALE 2.0
-
-attribute vec2 a_pos_normal;
-attribute vec4 a_data;
-
-uniform mat4 u_matrix;
-uniform vec2 u_units_to_pixels;
-uniform mediump float u_ratio;
-uniform lowp float u_device_pixel_ratio;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying float v_linesofar;
-varying float v_gamma_scale;
-varying float v_width;
-
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-#pragma mapbox: define lowp float offset
-#pragma mapbox: define mediump float gapwidth
-#pragma mapbox: define mediump float width
-#pragma mapbox: define lowp float floorwidth
-#pragma mapbox: define lowp vec4 pattern_from
-#pragma mapbox: define lowp vec4 pattern_to
-#pragma mapbox: define lowp float pixel_ratio_from
-#pragma mapbox: define lowp float pixel_ratio_to
-
-void main() {
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-    #pragma mapbox: initialize lowp float offset
-    #pragma mapbox: initialize mediump float gapwidth
-    #pragma mapbox: initialize mediump float width
-    #pragma mapbox: initialize lowp float floorwidth
-    #pragma mapbox: initialize mediump vec4 pattern_from
-    #pragma mapbox: initialize mediump vec4 pattern_to
-    #pragma mapbox: initialize lowp float pixel_ratio_from
-    #pragma mapbox: initialize lowp float pixel_ratio_to
-
-    // the distance over which the line edge fades out.
-    // Retina devices need a smaller distance to avoid aliasing.
-    float ANTIALIASING = 1.0 / u_device_pixel_ratio / 2.0;
-
-    vec2 a_extrude = a_data.xy - 128.0;
-    float a_direction = mod(a_data.z, 4.0) - 1.0;
-    float a_linesofar = (floor(a_data.z / 4.0) + a_data.w * 64.0) * LINE_DISTANCE_SCALE;
-    // float tileRatio = u_scale.x;
-    vec2 pos = floor(a_pos_normal * 0.5);
-
-    // x is 1 if it's a round cap, 0 otherwise
-    // y is 1 if the normal points up, and -1 if it points down
-    // We store these in the least significant bit of a_pos_normal
-    mediump vec2 normal = a_pos_normal - 2.0 * pos;
-    normal.y = normal.y * 2.0 - 1.0;
-    v_normal = normal;
-
-    // these transformations used to be applied in the JS and native code bases.
-    // moved them into the shader for clarity and simplicity.
-    gapwidth = gapwidth / 2.0;
-    float halfwidth = width / 2.0;
-    offset = -1.0 * offset;
-
-    float inset = gapwidth + (gapwidth > 0.0 ? ANTIALIASING : 0.0);
-    float outset = gapwidth + halfwidth * (gapwidth > 0.0 ? 2.0 : 1.0) + (halfwidth == 0.0 ? 0.0 : ANTIALIASING);
-
-    // Scale the extrusion vector down to a normal and then up by the line width
-    // of this vertex.
-    mediump vec2 dist = outset * a_extrude * scale;
-
-    // Calculate the offset when drawing a line that is to the side of the actual line.
-    // We do this by creating a vector that points towards the extrude, but rotate
-    // it when we're drawing round end points (a_direction = -1 or 1) since their
-    // extrude vector points in another direction.
-    mediump float u = 0.5 * a_direction;
-    mediump float t = 1.0 - abs(u);
-    mediump vec2 offset2 = offset * a_extrude * scale * normal.y * mat2(t, -u, u, t);
-
-    vec4 projected_extrude = u_matrix * vec4(dist / u_ratio, 0.0, 0.0);
-    gl_Position = u_matrix * vec4(pos + offset2 / u_ratio, 0.0, 1.0) + projected_extrude;
-
-    // calculate how much the perspective view squishes or stretches the extrude
-    float extrude_length_without_perspective = length(dist);
-    float extrude_length_with_perspective = length(projected_extrude.xy / gl_Position.w * u_units_to_pixels);
-    v_gamma_scale = extrude_length_without_perspective / extrude_length_with_perspective;
-
-    v_linesofar = a_linesofar;
-    v_width2 = vec2(outset, inset);
-    v_width = floorwidth;
-}

package/src/shaders/line_sdf.fragment.glsl

@@ -1,45 +0,0 @@
-
-uniform lowp float u_device_pixel_ratio;
-uniform sampler2D u_image;
-uniform float u_sdfgamma;
-uniform float u_mix;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying vec2 v_tex_a;
-varying vec2 v_tex_b;
-varying float v_gamma_scale;
-
-#pragma mapbox: define highp vec4 color
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-#pragma mapbox: define mediump float width
-#pragma mapbox: define lowp float floorwidth
-
-void main() {
-    #pragma mapbox: initialize highp vec4 color
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-    #pragma mapbox: initialize mediump float width
-    #pragma mapbox: initialize lowp float floorwidth
-
-    // Calculate the distance of the pixel from the line in pixels.
-    float dist = length(v_normal) * v_width2.s;
-
-    // Calculate the antialiasing fade factor. This is either when fading in
-    // the line in case of an offset line (v_width2.t) or when fading out
-    // (v_width2.s)
-    float blur2 = (blur + 1.0 / u_device_pixel_ratio) * v_gamma_scale;
-    float alpha = clamp(min(dist - (v_width2.t - blur2), v_width2.s - dist) / blur2, 0.0, 1.0);
-
-    float sdfdist_a = texture2D(u_image, v_tex_a).a;
-    float sdfdist_b = texture2D(u_image, v_tex_b).a;
-    float sdfdist = mix(sdfdist_a, sdfdist_b, u_mix);
-    alpha *= smoothstep(0.5 - u_sdfgamma / floorwidth, 0.5 + u_sdfgamma / floorwidth, sdfdist);
-
-    gl_FragColor = color * (alpha * opacity);
-
-#ifdef OVERDRAW_INSPECTOR
-    gl_FragColor = vec4(1.0);
-#endif
-}

package/src/shaders/line_sdf.vertex.glsl

@@ -1,98 +0,0 @@
-// floor(127 / 2) == 63.0
-// the maximum allowed miter limit is 2.0 at the moment. the extrude normal is
-// stored in a byte (-128..127). we scale regular normals up to length 63, but
-// there are also "special" normals that have a bigger length (of up to 126 in
-// this case).
-// #define scale 63.0
-#define scale 0.015873016
-
-// We scale the distance before adding it to the buffers so that we can store
-// long distances for long segments. Use this value to unscale the distance.
-#define LINE_DISTANCE_SCALE 2.0
-
-attribute vec2 a_pos_normal;
-attribute vec4 a_data;
-
-uniform mat4 u_matrix;
-uniform mediump float u_ratio;
-uniform lowp float u_device_pixel_ratio;
-uniform vec2 u_patternscale_a;
-uniform float u_tex_y_a;
-uniform vec2 u_patternscale_b;
-uniform float u_tex_y_b;
-uniform vec2 u_units_to_pixels;
-
-varying vec2 v_normal;
-varying vec2 v_width2;
-varying vec2 v_tex_a;
-varying vec2 v_tex_b;
-varying float v_gamma_scale;
-
-#pragma mapbox: define highp vec4 color
-#pragma mapbox: define lowp float blur
-#pragma mapbox: define lowp float opacity
-#pragma mapbox: define mediump float gapwidth
-#pragma mapbox: define lowp float offset
-#pragma mapbox: define mediump float width
-#pragma mapbox: define lowp float floorwidth
-
-void main() {
-    #pragma mapbox: initialize highp vec4 color
-    #pragma mapbox: initialize lowp float blur
-    #pragma mapbox: initialize lowp float opacity
-    #pragma mapbox: initialize mediump float gapwidth
-    #pragma mapbox: initialize lowp float offset
-    #pragma mapbox: initialize mediump float width
-    #pragma mapbox: initialize lowp float floorwidth
-
-    // the distance over which the line edge fades out.
-    // Retina devices need a smaller distance to avoid aliasing.
-    float ANTIALIASING = 1.0 / u_device_pixel_ratio / 2.0;
-
-    vec2 a_extrude = a_data.xy - 128.0;
-    float a_direction = mod(a_data.z, 4.0) - 1.0;
-    float a_linesofar = (floor(a_data.z / 4.0) + a_data.w * 64.0) * LINE_DISTANCE_SCALE;
-
-    vec2 pos = floor(a_pos_normal * 0.5);
-
-    // x is 1 if it's a round cap, 0 otherwise
-    // y is 1 if the normal points up, and -1 if it points down
-    // We store these in the least significant bit of a_pos_normal
-    mediump vec2 normal = a_pos_normal - 2.0 * pos;
-    normal.y = normal.y * 2.0 - 1.0;
-    v_normal = normal;
-
-    // these transformations used to be applied in the JS and native code bases.
-    // moved them into the shader for clarity and simplicity.
-    gapwidth = gapwidth / 2.0;
-    float halfwidth = width / 2.0;
-    offset = -1.0 * offset;
-
-    float inset = gapwidth + (gapwidth > 0.0 ? ANTIALIASING : 0.0);
-    float outset = gapwidth + halfwidth * (gapwidth > 0.0 ? 2.0 : 1.0) + (halfwidth == 0.0 ? 0.0 : ANTIALIASING);
-
-    // Scale the extrusion vector down to a normal and then up by the line width
-    // of this vertex.
-    mediump vec2 dist =outset * a_extrude * scale;
-
-    // Calculate the offset when drawing a line that is to the side of the actual line.
-    // We do this by creating a vector that points towards the extrude, but rotate
-    // it when we're drawing round end points (a_direction = -1 or 1) since their
-    // extrude vector points in another direction.
-    mediump float u = 0.5 * a_direction;
-    mediump float t = 1.0 - abs(u);
-    mediump vec2 offset2 = offset * a_extrude * scale * normal.y * mat2(t, -u, u, t);
-
-    vec4 projected_extrude = u_matrix * vec4(dist / u_ratio, 0.0, 0.0);
-    gl_Position = u_matrix * vec4(pos + offset2 / u_ratio, 0.0, 1.0) + projected_extrude;
-
-    // calculate how much the perspective view squishes or stretches the extrude
-    float extrude_length_without_perspective = length(dist);
-    float extrude_length_with_perspective = length(projected_extrude.xy / gl_Position.w * u_units_to_pixels);
-    v_gamma_scale = extrude_length_without_perspective / extrude_length_with_perspective;
-
-    v_tex_a = vec2(a_linesofar * u_patternscale_a.x / floorwidth, normal.y * u_patternscale_a.y + u_tex_y_a);
-    v_tex_b = vec2(a_linesofar * u_patternscale_b.x / floorwidth, normal.y * u_patternscale_b.y + u_tex_y_b);
-
-    v_width2 = vec2(outset, inset);
-}

package/src/shaders/raster.fragment.glsl

@@ -1,52 +0,0 @@
-uniform float u_fade_t;
-uniform float u_opacity;
-uniform sampler2D u_image0;
-uniform sampler2D u_image1;
-varying vec2 v_pos0;
-varying vec2 v_pos1;
-
-uniform float u_brightness_low;
-uniform float u_brightness_high;
-
-uniform float u_saturation_factor;
-uniform float u_contrast_factor;
-uniform vec3 u_spin_weights;
-
-void main() {
-
-    // read and cross-fade colors from the main and parent tiles
-    vec4 color0 = texture2D(u_image0, v_pos0);
-    vec4 color1 = texture2D(u_image1, v_pos1);
-    if (color0.a > 0.0) {
-        color0.rgb = color0.rgb / color0.a;
-    }
-    if (color1.a > 0.0) {
-        color1.rgb = color1.rgb / color1.a;
-    }
-    vec4 color = mix(color0, color1, u_fade_t);
-    color.a *= u_opacity;
-    vec3 rgb = color.rgb;
-
-    // spin
-    rgb = vec3(
-        dot(rgb, u_spin_weights.xyz),
-        dot(rgb, u_spin_weights.zxy),
-        dot(rgb, u_spin_weights.yzx));
-
-    // saturation
-    float average = (color.r + color.g + color.b) / 3.0;
-    rgb += (average - rgb) * u_saturation_factor;
-
-    // contrast
-    rgb = (rgb - 0.5) * u_contrast_factor + 0.5;
-
-    // brightness
-    vec3 u_high_vec = vec3(u_brightness_low, u_brightness_low, u_brightness_low);
-    vec3 u_low_vec = vec3(u_brightness_high, u_brightness_high, u_brightness_high);
-
-    gl_FragColor = vec4(mix(u_high_vec, u_low_vec, rgb) * color.a, color.a);
-
-#ifdef OVERDRAW_INSPECTOR
-    gl_FragColor = vec4(1.0);
-#endif
-}

package/src/shaders/raster.vertex.glsl

@@ -1,21 +0,0 @@
-uniform mat4 u_matrix;
-uniform vec2 u_tl_parent;
-uniform float u_scale_parent;
-uniform float u_buffer_scale;
-
-attribute vec2 a_pos;
-attribute vec2 a_texture_pos;
-
-varying vec2 v_pos0;
-varying vec2 v_pos1;
-
-void main() {
-    gl_Position = u_matrix * vec4(a_pos, 0, 1);
-    // We are using Int16 for texture position coordinates to give us enough precision for
-    // fractional coordinates. We use 8192 to scale the texture coordinates in the buffer
-    // as an arbitrarily high number to preserve adequate precision when rendering.
-    // This is also the same value as the EXTENT we are using for our tile buffer pos coordinates,
-    // so math for modifying either is consistent.
-    v_pos0 = (((a_texture_pos / 8192.0) - 0.5) / u_buffer_scale ) + 0.5;
-    v_pos1 = (v_pos0 * u_scale_parent) + u_tl_parent;
-}