@linuxcnc-node/grpc-client 1.0.0

package/dist/generated/linuxcnc/v1/ComponentSessionMessage.d.ts

@@ -0,0 +1,31 @@
+import type { ComponentOpen as _linuxcnc_v1_ComponentOpen, ComponentOpen__Output as _linuxcnc_v1_ComponentOpen__Output } from '../../linuxcnc/v1/ComponentOpen';
+import type { ComponentPin as _linuxcnc_v1_ComponentPin, ComponentPin__Output as _linuxcnc_v1_ComponentPin__Output } from '../../linuxcnc/v1/ComponentPin';
+import type { ComponentParameter as _linuxcnc_v1_ComponentParameter, ComponentParameter__Output as _linuxcnc_v1_ComponentParameter__Output } from '../../linuxcnc/v1/ComponentParameter';
+import type { ComponentReady as _linuxcnc_v1_ComponentReady, ComponentReady__Output as _linuxcnc_v1_ComponentReady__Output } from '../../linuxcnc/v1/ComponentReady';
+import type { ComponentValue as _linuxcnc_v1_ComponentValue, ComponentValue__Output as _linuxcnc_v1_ComponentValue__Output } from '../../linuxcnc/v1/ComponentValue';
+import type { ComponentDelta as _linuxcnc_v1_ComponentDelta, ComponentDelta__Output as _linuxcnc_v1_ComponentDelta__Output } from '../../linuxcnc/v1/ComponentDelta';
+import type { ComponentClose as _linuxcnc_v1_ComponentClose, ComponentClose__Output as _linuxcnc_v1_ComponentClose__Output } from '../../linuxcnc/v1/ComponentClose';
+import type { HalWriterMetadata as _linuxcnc_v1_HalWriterMetadata, HalWriterMetadata__Output as _linuxcnc_v1_HalWriterMetadata__Output } from '../../linuxcnc/v1/HalWriterMetadata';
+export interface ComponentSessionMessage {
+    'open'?: (_linuxcnc_v1_ComponentOpen | null);
+    'pin'?: (_linuxcnc_v1_ComponentPin | null);
+    'parameter'?: (_linuxcnc_v1_ComponentParameter | null);
+    'ready'?: (_linuxcnc_v1_ComponentReady | null);
+    'value'?: (_linuxcnc_v1_ComponentValue | null);
+    'delta'?: (_linuxcnc_v1_ComponentDelta | null);
+    'close'?: (_linuxcnc_v1_ComponentClose | null);
+    'metadata'?: (_linuxcnc_v1_HalWriterMetadata | null);
+    'message'?: "open" | "pin" | "parameter" | "ready" | "value" | "delta" | "close" | "metadata";
+}
+export interface ComponentSessionMessage__Output {
+    'open'?: (_linuxcnc_v1_ComponentOpen__Output);
+    'pin'?: (_linuxcnc_v1_ComponentPin__Output);
+    'parameter'?: (_linuxcnc_v1_ComponentParameter__Output);
+    'ready'?: (_linuxcnc_v1_ComponentReady__Output);
+    'value'?: (_linuxcnc_v1_ComponentValue__Output);
+    'delta'?: (_linuxcnc_v1_ComponentDelta__Output);
+    'close'?: (_linuxcnc_v1_ComponentClose__Output);
+    'metadata'?: (_linuxcnc_v1_HalWriterMetadata__Output);
+    'message'?: "open" | "pin" | "parameter" | "ready" | "value" | "delta" | "close" | "metadata";
+}
+//# sourceMappingURL=ComponentSessionMessage.d.ts.map

package/dist/generated/linuxcnc/v1/ComponentSessionMessage.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ComponentSessionMessage.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ComponentSessionMessage.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,aAAa,IAAI,0BAA0B,EAAE,qBAAqB,IAAI,kCAAkC,EAAE,MAAM,iCAAiC,CAAC;AAChK,OAAO,KAAK,EAAE,YAAY,IAAI,yBAAyB,EAAE,oBAAoB,IAAI,iCAAiC,EAAE,MAAM,gCAAgC,CAAC;AAC3J,OAAO,KAAK,EAAE,kBAAkB,IAAI,+BAA+B,EAAE,0BAA0B,IAAI,uCAAuC,EAAE,MAAM,sCAAsC,CAAC;AACzL,OAAO,KAAK,EAAE,cAAc,IAAI,2BAA2B,EAAE,sBAAsB,IAAI,mCAAmC,EAAE,MAAM,kCAAkC,CAAC;AACrK,OAAO,KAAK,EAAE,cAAc,IAAI,2BAA2B,EAAE,sBAAsB,IAAI,mCAAmC,EAAE,MAAM,kCAAkC,CAAC;AACrK,OAAO,KAAK,EAAE,cAAc,IAAI,2BAA2B,EAAE,sBAAsB,IAAI,mCAAmC,EAAE,MAAM,kCAAkC,CAAC;AACrK,OAAO,KAAK,EAAE,cAAc,IAAI,2BAA2B,EAAE,sBAAsB,IAAI,mCAAmC,EAAE,MAAM,kCAAkC,CAAC;AACrK,OAAO,KAAK,EAAE,iBAAiB,IAAI,8BAA8B,EAAE,yBAAyB,IAAI,sCAAsC,EAAE,MAAM,qCAAqC,CAAC;AAEpL,MAAM,WAAW,uBAAuB;IACtC,MAAM,CAAC,EAAE,CAAC,0BAA0B,GAAG,IAAI,CAAC,CAAC;IAC7C,KAAK,CAAC,EAAE,CAAC,yBAAyB,GAAG,IAAI,CAAC,CAAC;IAC3C,WAAW,CAAC,EAAE,CAAC,+BAA+B,GAAG,IAAI,CAAC,CAAC;IACvD,OAAO,CAAC,EAAE,CAAC,2BAA2B,GAAG,IAAI,CAAC,CAAC;IAC/C,OAAO,CAAC,EAAE,CAAC,2BAA2B,GAAG,IAAI,CAAC,CAAC;IAC/C,OAAO,CAAC,EAAE,CAAC,2BAA2B,GAAG,IAAI,CAAC,CAAC;IAC/C,OAAO,CAAC,EAAE,CAAC,2BAA2B,GAAG,IAAI,CAAC,CAAC;IAC/C,UAAU,CAAC,EAAE,CAAC,8BAA8B,GAAG,IAAI,CAAC,CAAC;IACrD,SAAS,CAAC,EAAE,MAAM,GAAC,KAAK,GAAC,WAAW,GAAC,OAAO,GAAC,OAAO,GAAC,OAAO,GAAC,OAAO,GAAC,UAAU,CAAC;CACjF;AAED,MAAM,WAAW,+BAA+B;IAC9C,MAAM,CAAC,EAAE,CAAC,kCAAkC,CAAC,CAAC;IAC9C,KAAK,CAAC,EAAE,CAAC,iCAAiC,CAAC,CAAC;IAC5C,WAAW,CAAC,EAAE,CAAC,uCAAuC,CAAC,CAAC;IACxD,OAAO,CAAC,EAAE,CAAC,mCAAmC,CAAC,CAAC;IAChD,OAAO,CAAC,EAAE,CAAC,mCAAmC,CAAC,CAAC;IAChD,OAAO,CAAC,EAAE,CAAC,mCAAmC,CAAC,CAAC;IAChD,OAAO,CAAC,EAAE,CAAC,mCAAmC,CAAC,CAAC;IAChD,UAAU,CAAC,EAAE,CAAC,sCAAsC,CAAC,CAAC;IACtD,SAAS,CAAC,EAAE,MAAM,GAAC,KAAK,GAAC,WAAW,GAAC,OAAO,GAAC,OAAO,GAAC,OAAO,GAAC,OAAO,GAAC,UAAU,CAAC;CACjF"}

package/dist/generated/linuxcnc/v1/ComponentSessionMessage.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=ComponentSessionMessage.js.map

package/dist/generated/linuxcnc/v1/ComponentSessionMessage.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ComponentSessionMessage.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ComponentSessionMessage.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/ComponentValue.d.ts

@@ -0,0 +1,11 @@
+import type { HalItemRef as _linuxcnc_v1_HalItemRef, HalItemRef__Output as _linuxcnc_v1_HalItemRef__Output } from '../../linuxcnc/v1/HalItemRef';
+import type { HalScalar as _linuxcnc_v1_HalScalar, HalScalar__Output as _linuxcnc_v1_HalScalar__Output } from '../../linuxcnc/v1/HalScalar';
+export interface ComponentValue {
+    'item'?: (_linuxcnc_v1_HalItemRef | null);
+    'value'?: (_linuxcnc_v1_HalScalar | null);
+}
+export interface ComponentValue__Output {
+    'item'?: (_linuxcnc_v1_HalItemRef__Output);
+    'value'?: (_linuxcnc_v1_HalScalar__Output);
+}
+//# sourceMappingURL=ComponentValue.d.ts.map

package/dist/generated/linuxcnc/v1/ComponentValue.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ComponentValue.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ComponentValue.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,UAAU,IAAI,uBAAuB,EAAE,kBAAkB,IAAI,+BAA+B,EAAE,MAAM,8BAA8B,CAAC;AACjJ,OAAO,KAAK,EAAE,SAAS,IAAI,sBAAsB,EAAE,iBAAiB,IAAI,8BAA8B,EAAE,MAAM,6BAA6B,CAAC;AAE5I,MAAM,WAAW,cAAc;IAC7B,MAAM,CAAC,EAAE,CAAC,uBAAuB,GAAG,IAAI,CAAC,CAAC;IAC1C,OAAO,CAAC,EAAE,CAAC,sBAAsB,GAAG,IAAI,CAAC,CAAC;CAC3C;AAED,MAAM,WAAW,sBAAsB;IACrC,MAAM,CAAC,EAAE,CAAC,+BAA+B,CAAC,CAAC;IAC3C,OAAO,CAAC,EAAE,CAAC,8BAA8B,CAAC,CAAC;CAC5C"}

package/dist/generated/linuxcnc/v1/ComponentValue.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=ComponentValue.js.map

package/dist/generated/linuxcnc/v1/ComponentValue.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ComponentValue.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ComponentValue.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/ControlPointG5.d.ts

@@ -0,0 +1,11 @@
+export interface ControlPointG5 {
+    'x'?: (number | string);
+    'y'?: (number | string);
+    'weight'?: (number | string);
+}
+export interface ControlPointG5__Output {
+    'x'?: (number);
+    'y'?: (number);
+    'weight'?: (number);
+}
+//# sourceMappingURL=ControlPointG5.d.ts.map

package/dist/generated/linuxcnc/v1/ControlPointG5.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ControlPointG5.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ControlPointG5.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,cAAc;IAC7B,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IACxB,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IACxB,QAAQ,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;CAC9B;AAED,MAAM,WAAW,sBAAsB;IACrC,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACf,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACf,QAAQ,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CACrB"}

package/dist/generated/linuxcnc/v1/ControlPointG5.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=ControlPointG5.js.map

package/dist/generated/linuxcnc/v1/ControlPointG5.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ControlPointG5.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ControlPointG5.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/ControlPointG6.d.ts

@@ -0,0 +1,13 @@
+export interface ControlPointG6 {
+    'x'?: (number | string);
+    'y'?: (number | string);
+    'r'?: (number | string);
+    'k'?: (number | string);
+}
+export interface ControlPointG6__Output {
+    'x'?: (number);
+    'y'?: (number);
+    'r'?: (number);
+    'k'?: (number);
+}
+//# sourceMappingURL=ControlPointG6.d.ts.map

package/dist/generated/linuxcnc/v1/ControlPointG6.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ControlPointG6.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ControlPointG6.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,cAAc;IAC7B,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IACxB,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IACxB,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IACxB,GAAG,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;CACzB;AAED,MAAM,WAAW,sBAAsB;IACrC,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACf,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACf,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACf,GAAG,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CAChB"}

package/dist/generated/linuxcnc/v1/ControlPointG6.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=ControlPointG6.js.map

package/dist/generated/linuxcnc/v1/ControlPointG6.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ControlPointG6.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ControlPointG6.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/CoolantIoStat.d.ts

@@ -0,0 +1,9 @@
+export interface CoolantIoStat {
+    'mist'?: (boolean);
+    'flood'?: (boolean);
+}
+export interface CoolantIoStat__Output {
+    'mist'?: (boolean);
+    'flood'?: (boolean);
+}
+//# sourceMappingURL=CoolantIoStat.d.ts.map

package/dist/generated/linuxcnc/v1/CoolantIoStat.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CoolantIoStat.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CoolantIoStat.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,aAAa;IAC5B,MAAM,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;IACnB,OAAO,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;CACrB;AAED,MAAM,WAAW,qBAAqB;IACpC,MAAM,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;IACnB,OAAO,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;CACrB"}

package/dist/generated/linuxcnc/v1/CoolantIoStat.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=CoolantIoStat.js.map

package/dist/generated/linuxcnc/v1/CoolantIoStat.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"CoolantIoStat.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CoolantIoStat.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/CreateHalSignalRequest.d.ts

@@ -0,0 +1,10 @@
+import type { HalType as _linuxcnc_v1_HalType, HalType__Output as _linuxcnc_v1_HalType__Output } from '../../linuxcnc/v1/HalType';
+export interface CreateHalSignalRequest {
+    'name'?: (string);
+    'type'?: (_linuxcnc_v1_HalType);
+}
+export interface CreateHalSignalRequest__Output {
+    'name'?: (string);
+    'type'?: (_linuxcnc_v1_HalType__Output);
+}
+//# sourceMappingURL=CreateHalSignalRequest.d.ts.map

package/dist/generated/linuxcnc/v1/CreateHalSignalRequest.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateHalSignalRequest.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateHalSignalRequest.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,OAAO,IAAI,oBAAoB,EAAE,eAAe,IAAI,4BAA4B,EAAE,MAAM,2BAA2B,CAAC;AAElI,MAAM,WAAW,sBAAsB;IACrC,MAAM,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IAClB,MAAM,CAAC,EAAE,CAAC,oBAAoB,CAAC,CAAC;CACjC;AAED,MAAM,WAAW,8BAA8B;IAC7C,MAAM,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IAClB,MAAM,CAAC,EAAE,CAAC,4BAA4B,CAAC,CAAC;CACzC"}

package/dist/generated/linuxcnc/v1/CreateHalSignalRequest.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=CreateHalSignalRequest.js.map

package/dist/generated/linuxcnc/v1/CreateHalSignalRequest.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateHalSignalRequest.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateHalSignalRequest.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/CreateHalSignalResponse.d.ts

@@ -0,0 +1,8 @@
+import type { HalSignalInfo as _linuxcnc_v1_HalSignalInfo, HalSignalInfo__Output as _linuxcnc_v1_HalSignalInfo__Output } from '../../linuxcnc/v1/HalSignalInfo';
+export interface CreateHalSignalResponse {
+    'signal'?: (_linuxcnc_v1_HalSignalInfo | null);
+}
+export interface CreateHalSignalResponse__Output {
+    'signal'?: (_linuxcnc_v1_HalSignalInfo__Output);
+}
+//# sourceMappingURL=CreateHalSignalResponse.d.ts.map

package/dist/generated/linuxcnc/v1/CreateHalSignalResponse.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateHalSignalResponse.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateHalSignalResponse.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,aAAa,IAAI,0BAA0B,EAAE,qBAAqB,IAAI,kCAAkC,EAAE,MAAM,iCAAiC,CAAC;AAEhK,MAAM,WAAW,uBAAuB;IACtC,QAAQ,CAAC,EAAE,CAAC,0BAA0B,GAAG,IAAI,CAAC,CAAC;CAChD;AAED,MAAM,WAAW,+BAA+B;IAC9C,QAAQ,CAAC,EAAE,CAAC,kCAAkC,CAAC,CAAC;CACjD"}

package/dist/generated/linuxcnc/v1/CreateHalSignalResponse.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=CreateHalSignalResponse.js.map

package/dist/generated/linuxcnc/v1/CreateHalSignalResponse.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateHalSignalResponse.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateHalSignalResponse.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/CreateWorkspaceRequest.d.ts

@@ -0,0 +1,8 @@
+import type { Long } from '@grpc/proto-loader';
+export interface CreateWorkspaceRequest {
+    'ttlSeconds'?: (number | string | Long);
+}
+export interface CreateWorkspaceRequest__Output {
+    'ttlSeconds'?: (string);
+}
+//# sourceMappingURL=CreateWorkspaceRequest.d.ts.map

package/dist/generated/linuxcnc/v1/CreateWorkspaceRequest.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateWorkspaceRequest.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateWorkspaceRequest.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,IAAI,EAAE,MAAM,oBAAoB,CAAC;AAE/C,MAAM,WAAW,sBAAsB;IACrC,YAAY,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,GAAG,IAAI,CAAC,CAAC;CACzC;AAED,MAAM,WAAW,8BAA8B;IAC7C,YAAY,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CACzB"}

package/dist/generated/linuxcnc/v1/CreateWorkspaceRequest.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=CreateWorkspaceRequest.js.map

package/dist/generated/linuxcnc/v1/CreateWorkspaceRequest.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateWorkspaceRequest.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateWorkspaceRequest.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/CreateWorkspaceResponse.d.ts

@@ -0,0 +1,10 @@
+import type { Long } from '@grpc/proto-loader';
+export interface CreateWorkspaceResponse {
+    'workspaceId'?: (string);
+    'expiresAtUnixMs'?: (number | string | Long);
+}
+export interface CreateWorkspaceResponse__Output {
+    'workspaceId'?: (string);
+    'expiresAtUnixMs'?: (string);
+}
+//# sourceMappingURL=CreateWorkspaceResponse.d.ts.map

package/dist/generated/linuxcnc/v1/CreateWorkspaceResponse.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateWorkspaceResponse.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateWorkspaceResponse.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,IAAI,EAAE,MAAM,oBAAoB,CAAC;AAE/C,MAAM,WAAW,uBAAuB;IACtC,aAAa,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACzB,iBAAiB,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,GAAG,IAAI,CAAC,CAAC;CAC9C;AAED,MAAM,WAAW,+BAA+B;IAC9C,aAAa,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACzB,iBAAiB,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CAC9B"}

package/dist/generated/linuxcnc/v1/CreateWorkspaceResponse.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=CreateWorkspaceResponse.js.map

package/dist/generated/linuxcnc/v1/CreateWorkspaceResponse.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"CreateWorkspaceResponse.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/CreateWorkspaceResponse.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/DeleteWorkspaceRequest.d.ts

@@ -0,0 +1,7 @@
+export interface DeleteWorkspaceRequest {
+    'workspaceId'?: (string);
+}
+export interface DeleteWorkspaceRequest__Output {
+    'workspaceId'?: (string);
+}
+//# sourceMappingURL=DeleteWorkspaceRequest.d.ts.map

package/dist/generated/linuxcnc/v1/DeleteWorkspaceRequest.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DeleteWorkspaceRequest.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DeleteWorkspaceRequest.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,sBAAsB;IACrC,aAAa,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CAC1B;AAED,MAAM,WAAW,8BAA8B;IAC7C,aAAa,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;CAC1B"}

package/dist/generated/linuxcnc/v1/DeleteWorkspaceRequest.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=DeleteWorkspaceRequest.js.map

package/dist/generated/linuxcnc/v1/DeleteWorkspaceRequest.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"DeleteWorkspaceRequest.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DeleteWorkspaceRequest.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/DigitalOutput.d.ts

@@ -0,0 +1,9 @@
+export interface DigitalOutput {
+    'index'?: (number);
+    'value'?: (boolean);
+}
+export interface DigitalOutput__Output {
+    'index'?: (number);
+    'value'?: (boolean);
+}
+//# sourceMappingURL=DigitalOutput.d.ts.map

package/dist/generated/linuxcnc/v1/DigitalOutput.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DigitalOutput.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DigitalOutput.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,aAAa;IAC5B,OAAO,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACnB,OAAO,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;CACrB;AAED,MAAM,WAAW,qBAAqB;IACpC,OAAO,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACnB,OAAO,CAAC,EAAE,CAAC,OAAO,CAAC,CAAC;CACrB"}

package/dist/generated/linuxcnc/v1/DigitalOutput.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=DigitalOutput.js.map

package/dist/generated/linuxcnc/v1/DigitalOutput.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"DigitalOutput.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DigitalOutput.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/DwellData.d.ts

@@ -0,0 +1,10 @@
+import type { Plane as _linuxcnc_v1_Plane, Plane__Output as _linuxcnc_v1_Plane__Output } from '../../linuxcnc/v1/Plane';
+export interface DwellData {
+    'duration'?: (number | string);
+    'plane'?: (_linuxcnc_v1_Plane);
+}
+export interface DwellData__Output {
+    'duration'?: (number);
+    'plane'?: (_linuxcnc_v1_Plane__Output);
+}
+//# sourceMappingURL=DwellData.d.ts.map

package/dist/generated/linuxcnc/v1/DwellData.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"DwellData.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DwellData.ts"],"names":[],"mappings":"AAEA,OAAO,KAAK,EAAE,KAAK,IAAI,kBAAkB,EAAE,aAAa,IAAI,0BAA0B,EAAE,MAAM,yBAAyB,CAAC;AAExH,MAAM,WAAW,SAAS;IACxB,UAAU,CAAC,EAAE,CAAC,MAAM,GAAG,MAAM,CAAC,CAAC;IAC/B,OAAO,CAAC,EAAE,CAAC,kBAAkB,CAAC,CAAC;CAChC;AAED,MAAM,WAAW,iBAAiB;IAChC,UAAU,CAAC,EAAE,CAAC,MAAM,CAAC,CAAC;IACtB,OAAO,CAAC,EAAE,CAAC,0BAA0B,CAAC,CAAC;CACxC"}

package/dist/generated/linuxcnc/v1/DwellData.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=DwellData.js.map

package/dist/generated/linuxcnc/v1/DwellData.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"DwellData.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/DwellData.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/EmcDebug.d.ts

@@ -0,0 +1,21 @@
+export declare const EmcDebug: {
+    readonly EMC_DEBUG_UNSPECIFIED: 0;
+    readonly EMC_DEBUG_CONFIG: 2;
+    readonly EMC_DEBUG_VERSIONS: 8;
+    readonly EMC_DEBUG_TASK_ISSUE: 16;
+    readonly EMC_DEBUG_NML: 64;
+    readonly EMC_DEBUG_MOTION_TIME: 128;
+    readonly EMC_DEBUG_INTERP: 256;
+    readonly EMC_DEBUG_RCS: 512;
+    readonly EMC_DEBUG_INTERP_LIST: 2048;
+    readonly EMC_DEBUG_IOCONTROL: 4096;
+    readonly EMC_DEBUG_OWORD: 8192;
+    readonly EMC_DEBUG_REMAP: 16384;
+    readonly EMC_DEBUG_PYTHON: 32768;
+    readonly EMC_DEBUG_NAMEDPARAM: 65536;
+    readonly EMC_DEBUG_GDBONSIGNAL: 131072;
+    readonly EMC_DEBUG_STATE_TAGS: 524288;
+};
+export type EmcDebug = 'EMC_DEBUG_UNSPECIFIED' | 0 | 'EMC_DEBUG_CONFIG' | 2 | 'EMC_DEBUG_VERSIONS' | 8 | 'EMC_DEBUG_TASK_ISSUE' | 16 | 'EMC_DEBUG_NML' | 64 | 'EMC_DEBUG_MOTION_TIME' | 128 | 'EMC_DEBUG_INTERP' | 256 | 'EMC_DEBUG_RCS' | 512 | 'EMC_DEBUG_INTERP_LIST' | 2048 | 'EMC_DEBUG_IOCONTROL' | 4096 | 'EMC_DEBUG_OWORD' | 8192 | 'EMC_DEBUG_REMAP' | 16384 | 'EMC_DEBUG_PYTHON' | 32768 | 'EMC_DEBUG_NAMEDPARAM' | 65536 | 'EMC_DEBUG_GDBONSIGNAL' | 131072 | 'EMC_DEBUG_STATE_TAGS' | 524288;
+export type EmcDebug__Output = typeof EmcDebug[keyof typeof EmcDebug];
+//# sourceMappingURL=EmcDebug.d.ts.map

package/dist/generated/linuxcnc/v1/EmcDebug.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"EmcDebug.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/EmcDebug.ts"],"names":[],"mappings":"AAEA,eAAO,MAAM,QAAQ;;;;;;;;;;;;;;;;;CAiBX,CAAC;AAEX,MAAM,MAAM,QAAQ,GAChB,uBAAuB,GACvB,CAAC,GACD,kBAAkB,GAClB,CAAC,GACD,oBAAoB,GACpB,CAAC,GACD,sBAAsB,GACtB,EAAE,GACF,eAAe,GACf,EAAE,GACF,uBAAuB,GACvB,GAAG,GACH,kBAAkB,GAClB,GAAG,GACH,eAAe,GACf,GAAG,GACH,uBAAuB,GACvB,IAAI,GACJ,qBAAqB,GACrB,IAAI,GACJ,iBAAiB,GACjB,IAAI,GACJ,iBAAiB,GACjB,KAAK,GACL,kBAAkB,GAClB,KAAK,GACL,sBAAsB,GACtB,KAAK,GACL,uBAAuB,GACvB,MAAM,GACN,sBAAsB,GACtB,MAAM,CAAA;AAEV,MAAM,MAAM,gBAAgB,GAAG,OAAO,QAAQ,CAAC,MAAM,OAAO,QAAQ,CAAC,CAAA"}

package/dist/generated/linuxcnc/v1/EmcDebug.js

@@ -0,0 +1,23 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.EmcDebug = void 0;
+exports.EmcDebug = {
+    EMC_DEBUG_UNSPECIFIED: 0,
+    EMC_DEBUG_CONFIG: 2,
+    EMC_DEBUG_VERSIONS: 8,
+    EMC_DEBUG_TASK_ISSUE: 16,
+    EMC_DEBUG_NML: 64,
+    EMC_DEBUG_MOTION_TIME: 128,
+    EMC_DEBUG_INTERP: 256,
+    EMC_DEBUG_RCS: 512,
+    EMC_DEBUG_INTERP_LIST: 2048,
+    EMC_DEBUG_IOCONTROL: 4096,
+    EMC_DEBUG_OWORD: 8192,
+    EMC_DEBUG_REMAP: 16384,
+    EMC_DEBUG_PYTHON: 32768,
+    EMC_DEBUG_NAMEDPARAM: 65536,
+    EMC_DEBUG_GDBONSIGNAL: 131072,
+    EMC_DEBUG_STATE_TAGS: 524288,
+};
+//# sourceMappingURL=EmcDebug.js.map

package/dist/generated/linuxcnc/v1/EmcDebug.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"EmcDebug.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/EmcDebug.ts"],"names":[],"mappings":";AAAA,kDAAkD;;;AAErC,QAAA,QAAQ,GAAG;IACtB,qBAAqB,EAAE,CAAC;IACxB,gBAAgB,EAAE,CAAC;IACnB,kBAAkB,EAAE,CAAC;IACrB,oBAAoB,EAAE,EAAE;IACxB,aAAa,EAAE,EAAE;IACjB,qBAAqB,EAAE,GAAG;IAC1B,gBAAgB,EAAE,GAAG;IACrB,aAAa,EAAE,GAAG;IAClB,qBAAqB,EAAE,IAAI;IAC3B,mBAAmB,EAAE,IAAI;IACzB,eAAe,EAAE,IAAI;IACrB,eAAe,EAAE,KAAK;IACtB,gBAAgB,EAAE,KAAK;IACvB,oBAAoB,EAAE,KAAK;IAC3B,qBAAqB,EAAE,MAAM;IAC7B,oBAAoB,EAAE,MAAM;CACpB,CAAC"}

package/dist/generated/linuxcnc/v1/EmptyCommand.d.ts

@@ -0,0 +1,5 @@
+export interface EmptyCommand {
+}
+export interface EmptyCommand__Output {
+}
+//# sourceMappingURL=EmptyCommand.d.ts.map

package/dist/generated/linuxcnc/v1/EmptyCommand.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"EmptyCommand.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/EmptyCommand.ts"],"names":[],"mappings":"AAGA,MAAM,WAAW,YAAY;CAC5B;AAED,MAAM,WAAW,oBAAoB;CACpC"}

package/dist/generated/linuxcnc/v1/EmptyCommand.js

@@ -0,0 +1,4 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+//# sourceMappingURL=EmptyCommand.js.map

package/dist/generated/linuxcnc/v1/EmptyCommand.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"EmptyCommand.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/EmptyCommand.ts"],"names":[],"mappings":";AAAA,kDAAkD"}

package/dist/generated/linuxcnc/v1/ExecState.d.ts

@@ -0,0 +1,15 @@
+export declare const ExecState: {
+    readonly EXEC_STATE_UNSPECIFIED: 0;
+    readonly EXEC_STATE_ERROR: 1;
+    readonly EXEC_STATE_DONE: 2;
+    readonly EXEC_STATE_WAITING_FOR_MOTION: 3;
+    readonly EXEC_STATE_WAITING_FOR_MOTION_QUEUE: 4;
+    readonly EXEC_STATE_WAITING_FOR_IO: 5;
+    readonly EXEC_STATE_WAITING_FOR_MOTION_AND_IO: 7;
+    readonly EXEC_STATE_WAITING_FOR_DELAY: 8;
+    readonly EXEC_STATE_WAITING_FOR_SYSTEM_CMD: 9;
+    readonly EXEC_STATE_WAITING_FOR_SPINDLE_ORIENTED: 10;
+};
+export type ExecState = 'EXEC_STATE_UNSPECIFIED' | 0 | 'EXEC_STATE_ERROR' | 1 | 'EXEC_STATE_DONE' | 2 | 'EXEC_STATE_WAITING_FOR_MOTION' | 3 | 'EXEC_STATE_WAITING_FOR_MOTION_QUEUE' | 4 | 'EXEC_STATE_WAITING_FOR_IO' | 5 | 'EXEC_STATE_WAITING_FOR_MOTION_AND_IO' | 7 | 'EXEC_STATE_WAITING_FOR_DELAY' | 8 | 'EXEC_STATE_WAITING_FOR_SYSTEM_CMD' | 9 | 'EXEC_STATE_WAITING_FOR_SPINDLE_ORIENTED' | 10;
+export type ExecState__Output = typeof ExecState[keyof typeof ExecState];
+//# sourceMappingURL=ExecState.d.ts.map

package/dist/generated/linuxcnc/v1/ExecState.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"ExecState.d.ts","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ExecState.ts"],"names":[],"mappings":"AAEA,eAAO,MAAM,SAAS;;;;;;;;;;;CAWZ,CAAC;AAEX,MAAM,MAAM,SAAS,GACjB,wBAAwB,GACxB,CAAC,GACD,kBAAkB,GAClB,CAAC,GACD,iBAAiB,GACjB,CAAC,GACD,+BAA+B,GAC/B,CAAC,GACD,qCAAqC,GACrC,CAAC,GACD,2BAA2B,GAC3B,CAAC,GACD,sCAAsC,GACtC,CAAC,GACD,8BAA8B,GAC9B,CAAC,GACD,mCAAmC,GACnC,CAAC,GACD,yCAAyC,GACzC,EAAE,CAAA;AAEN,MAAM,MAAM,iBAAiB,GAAG,OAAO,SAAS,CAAC,MAAM,OAAO,SAAS,CAAC,CAAA"}

package/dist/generated/linuxcnc/v1/ExecState.js

@@ -0,0 +1,17 @@
+"use strict";
+// Original file: proto/linuxcnc/v1/linuxcnc.proto
+Object.defineProperty(exports, "__esModule", { value: true });
+exports.ExecState = void 0;
+exports.ExecState = {
+    EXEC_STATE_UNSPECIFIED: 0,
+    EXEC_STATE_ERROR: 1,
+    EXEC_STATE_DONE: 2,
+    EXEC_STATE_WAITING_FOR_MOTION: 3,
+    EXEC_STATE_WAITING_FOR_MOTION_QUEUE: 4,
+    EXEC_STATE_WAITING_FOR_IO: 5,
+    EXEC_STATE_WAITING_FOR_MOTION_AND_IO: 7,
+    EXEC_STATE_WAITING_FOR_DELAY: 8,
+    EXEC_STATE_WAITING_FOR_SYSTEM_CMD: 9,
+    EXEC_STATE_WAITING_FOR_SPINDLE_ORIENTED: 10,
+};
+//# sourceMappingURL=ExecState.js.map

package/dist/generated/linuxcnc/v1/ExecState.js.map

@@ -0,0 +1 @@
+{"version":3,"file":"ExecState.js","sourceRoot":"","sources":["../../../../src/generated/linuxcnc/v1/ExecState.ts"],"names":[],"mappings":";AAAA,kDAAkD;;;AAErC,QAAA,SAAS,GAAG;IACvB,sBAAsB,EAAE,CAAC;IACzB,gBAAgB,EAAE,CAAC;IACnB,eAAe,EAAE,CAAC;IAClB,6BAA6B,EAAE,CAAC;IAChC,mCAAmC,EAAE,CAAC;IACtC,yBAAyB,EAAE,CAAC;IAC5B,oCAAoC,EAAE,CAAC;IACvC,4BAA4B,EAAE,CAAC;IAC/B,iCAAiC,EAAE,CAAC;IACpC,uCAAuC,EAAE,EAAE;CACnC,CAAC"}

package/dist/generated/linuxcnc/v1/ExecuteCommandRequest.d.ts

@@ -0,0 +1,137 @@
+import type { WaitPolicy as _linuxcnc_v1_WaitPolicy, WaitPolicy__Output as _linuxcnc_v1_WaitPolicy__Output } from '../../linuxcnc/v1/WaitPolicy';
+import type { SetTaskMode as _linuxcnc_v1_SetTaskMode, SetTaskMode__Output as _linuxcnc_v1_SetTaskMode__Output } from '../../linuxcnc/v1/SetTaskMode';
+import type { SetTaskState as _linuxcnc_v1_SetTaskState, SetTaskState__Output as _linuxcnc_v1_SetTaskState__Output } from '../../linuxcnc/v1/SetTaskState';
+import type { EmptyCommand as _linuxcnc_v1_EmptyCommand, EmptyCommand__Output as _linuxcnc_v1_EmptyCommand__Output } from '../../linuxcnc/v1/EmptyCommand';
+import type { ProgramOpen as _linuxcnc_v1_ProgramOpen, ProgramOpen__Output as _linuxcnc_v1_ProgramOpen__Output } from '../../linuxcnc/v1/ProgramOpen';
+import type { RunProgram as _linuxcnc_v1_RunProgram, RunProgram__Output as _linuxcnc_v1_RunProgram__Output } from '../../linuxcnc/v1/RunProgram';
+import type { SetBool as _linuxcnc_v1_SetBool, SetBool__Output as _linuxcnc_v1_SetBool__Output } from '../../linuxcnc/v1/SetBool';
+import type { Mdi as _linuxcnc_v1_Mdi, Mdi__Output as _linuxcnc_v1_Mdi__Output } from '../../linuxcnc/v1/Mdi';
+import type { SetTrajMode as _linuxcnc_v1_SetTrajMode, SetTrajMode__Output as _linuxcnc_v1_SetTrajMode__Output } from '../../linuxcnc/v1/SetTrajMode';
+import type { SetDouble as _linuxcnc_v1_SetDouble, SetDouble__Output as _linuxcnc_v1_SetDouble__Output } from '../../linuxcnc/v1/SetDouble';
+import type { SetSpindleOverride as _linuxcnc_v1_SetSpindleOverride, SetSpindleOverride__Output as _linuxcnc_v1_SetSpindleOverride__Output } from '../../linuxcnc/v1/SetSpindleOverride';
+import type { SetSpindleOverrideEnable as _linuxcnc_v1_SetSpindleOverrideEnable, SetSpindleOverrideEnable__Output as _linuxcnc_v1_SetSpindleOverrideEnable__Output } from '../../linuxcnc/v1/SetSpindleOverrideEnable';
+import type { JointIndex as _linuxcnc_v1_JointIndex, JointIndex__Output as _linuxcnc_v1_JointIndex__Output } from '../../linuxcnc/v1/JointIndex';
+import type { JogStop as _linuxcnc_v1_JogStop, JogStop__Output as _linuxcnc_v1_JogStop__Output } from '../../linuxcnc/v1/JogStop';
+import type { JogContinuous as _linuxcnc_v1_JogContinuous, JogContinuous__Output as _linuxcnc_v1_JogContinuous__Output } from '../../linuxcnc/v1/JogContinuous';
+import type { JogIncrement as _linuxcnc_v1_JogIncrement, JogIncrement__Output as _linuxcnc_v1_JogIncrement__Output } from '../../linuxcnc/v1/JogIncrement';
+import type { JointLimit as _linuxcnc_v1_JointLimit, JointLimit__Output as _linuxcnc_v1_JointLimit__Output } from '../../linuxcnc/v1/JointLimit';
+import type { SpindleOn as _linuxcnc_v1_SpindleOn, SpindleOn__Output as _linuxcnc_v1_SpindleOn__Output } from '../../linuxcnc/v1/SpindleOn';
+import type { SpindleIndex as _linuxcnc_v1_SpindleIndex, SpindleIndex__Output as _linuxcnc_v1_SpindleIndex__Output } from '../../linuxcnc/v1/SpindleIndex';
+import type { SpindleBrake as _linuxcnc_v1_SpindleBrake, SpindleBrake__Output as _linuxcnc_v1_SpindleBrake__Output } from '../../linuxcnc/v1/SpindleBrake';
+import type { SetTool as _linuxcnc_v1_SetTool, SetTool__Output as _linuxcnc_v1_SetTool__Output } from '../../linuxcnc/v1/SetTool';
+import type { ToolNumber as _linuxcnc_v1_ToolNumber, ToolNumber__Output as _linuxcnc_v1_ToolNumber__Output } from '../../linuxcnc/v1/ToolNumber';
+import type { DigitalOutput as _linuxcnc_v1_DigitalOutput, DigitalOutput__Output as _linuxcnc_v1_DigitalOutput__Output } from '../../linuxcnc/v1/DigitalOutput';
+import type { AnalogOutput as _linuxcnc_v1_AnalogOutput, AnalogOutput__Output as _linuxcnc_v1_AnalogOutput__Output } from '../../linuxcnc/v1/AnalogOutput';
+import type { SetDebugLevel as _linuxcnc_v1_SetDebugLevel, SetDebugLevel__Output as _linuxcnc_v1_SetDebugLevel__Output } from '../../linuxcnc/v1/SetDebugLevel';
+import type { MessageCommand as _linuxcnc_v1_MessageCommand, MessageCommand__Output as _linuxcnc_v1_MessageCommand__Output } from '../../linuxcnc/v1/MessageCommand';
+export interface ExecuteCommandRequest {
+    'waitPolicy'?: (_linuxcnc_v1_WaitPolicy);
+    'setTaskMode'?: (_linuxcnc_v1_SetTaskMode | null);
+    'setState'?: (_linuxcnc_v1_SetTaskState | null);
+    'taskPlanSynch'?: (_linuxcnc_v1_EmptyCommand | null);
+    'resetInterpreter'?: (_linuxcnc_v1_EmptyCommand | null);
+    'programOpen'?: (_linuxcnc_v1_ProgramOpen | null);
+    'programClose'?: (_linuxcnc_v1_EmptyCommand | null);
+    'runProgram'?: (_linuxcnc_v1_RunProgram | null);
+    'pauseProgram'?: (_linuxcnc_v1_EmptyCommand | null);
+    'resumeProgram'?: (_linuxcnc_v1_EmptyCommand | null);
+    'stepProgram'?: (_linuxcnc_v1_EmptyCommand | null);
+    'reverseProgram'?: (_linuxcnc_v1_EmptyCommand | null);
+    'forwardProgram'?: (_linuxcnc_v1_EmptyCommand | null);
+    'stop'?: (_linuxcnc_v1_EmptyCommand | null);
+    'abortTask'?: (_linuxcnc_v1_EmptyCommand | null);
+    'setOptionalStop'?: (_linuxcnc_v1_SetBool | null);
+    'setBlockDelete'?: (_linuxcnc_v1_SetBool | null);
+    'mdi'?: (_linuxcnc_v1_Mdi | null);
+    'setTrajMode'?: (_linuxcnc_v1_SetTrajMode | null);
+    'setMaxVelocity'?: (_linuxcnc_v1_SetDouble | null);
+    'setFeedRate'?: (_linuxcnc_v1_SetDouble | null);
+    'setSpindleOverride'?: (_linuxcnc_v1_SetSpindleOverride | null);
+    'overrideLimits'?: (_linuxcnc_v1_EmptyCommand | null);
+    'teleopEnable'?: (_linuxcnc_v1_SetBool | null);
+    'setFeedOverrideEnable'?: (_linuxcnc_v1_SetBool | null);
+    'setSpindleOverrideEnable'?: (_linuxcnc_v1_SetSpindleOverrideEnable | null);
+    'setFeedHoldEnable'?: (_linuxcnc_v1_SetBool | null);
+    'setAdaptiveFeedEnable'?: (_linuxcnc_v1_SetBool | null);
+    'homeJoint'?: (_linuxcnc_v1_JointIndex | null);
+    'unhomeJoint'?: (_linuxcnc_v1_JointIndex | null);
+    'jogStop'?: (_linuxcnc_v1_JogStop | null);
+    'jogContinuous'?: (_linuxcnc_v1_JogContinuous | null);
+    'jogIncrement'?: (_linuxcnc_v1_JogIncrement | null);
+    'setMinPositionLimit'?: (_linuxcnc_v1_JointLimit | null);
+    'setMaxPositionLimit'?: (_linuxcnc_v1_JointLimit | null);
+    'spindleOn'?: (_linuxcnc_v1_SpindleOn | null);
+    'spindleIncrease'?: (_linuxcnc_v1_SpindleIndex | null);
+    'spindleDecrease'?: (_linuxcnc_v1_SpindleIndex | null);
+    'spindleOff'?: (_linuxcnc_v1_SpindleIndex | null);
+    'spindleBrake'?: (_linuxcnc_v1_SpindleBrake | null);
+    'setMist'?: (_linuxcnc_v1_SetBool | null);
+    'setFlood'?: (_linuxcnc_v1_SetBool | null);
+    'loadToolTable'?: (_linuxcnc_v1_EmptyCommand | null);
+    'setTool'?: (_linuxcnc_v1_SetTool | null);
+    'deleteTool'?: (_linuxcnc_v1_ToolNumber | null);
+    'setDigitalOutput'?: (_linuxcnc_v1_DigitalOutput | null);
+    'setAnalogOutput'?: (_linuxcnc_v1_AnalogOutput | null);
+    'setDebugLevel'?: (_linuxcnc_v1_SetDebugLevel | null);
+    'sendOperatorError'?: (_linuxcnc_v1_MessageCommand | null);
+    'sendOperatorText'?: (_linuxcnc_v1_MessageCommand | null);
+    'sendOperatorDisplay'?: (_linuxcnc_v1_MessageCommand | null);
+    'setRapidRate'?: (_linuxcnc_v1_SetDouble | null);
+    'command'?: "setTaskMode" | "setState" | "taskPlanSynch" | "resetInterpreter" | "programOpen" | "programClose" | "runProgram" | "pauseProgram" | "resumeProgram" | "stepProgram" | "reverseProgram" | "forwardProgram" | "stop" | "abortTask" | "setOptionalStop" | "setBlockDelete" | "mdi" | "setTrajMode" | "setMaxVelocity" | "setFeedRate" | "setSpindleOverride" | "overrideLimits" | "teleopEnable" | "setFeedOverrideEnable" | "setSpindleOverrideEnable" | "setFeedHoldEnable" | "setAdaptiveFeedEnable" | "homeJoint" | "unhomeJoint" | "jogStop" | "jogContinuous" | "jogIncrement" | "setMinPositionLimit" | "setMaxPositionLimit" | "spindleOn" | "spindleIncrease" | "spindleDecrease" | "spindleOff" | "spindleBrake" | "setMist" | "setFlood" | "loadToolTable" | "setTool" | "deleteTool" | "setDigitalOutput" | "setAnalogOutput" | "setDebugLevel" | "sendOperatorError" | "sendOperatorText" | "sendOperatorDisplay" | "setRapidRate";
+}
+export interface ExecuteCommandRequest__Output {
+    'waitPolicy'?: (_linuxcnc_v1_WaitPolicy__Output);
+    'setTaskMode'?: (_linuxcnc_v1_SetTaskMode__Output);
+    'setState'?: (_linuxcnc_v1_SetTaskState__Output);
+    'taskPlanSynch'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'resetInterpreter'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'programOpen'?: (_linuxcnc_v1_ProgramOpen__Output);
+    'programClose'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'runProgram'?: (_linuxcnc_v1_RunProgram__Output);
+    'pauseProgram'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'resumeProgram'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'stepProgram'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'reverseProgram'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'forwardProgram'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'stop'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'abortTask'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'setOptionalStop'?: (_linuxcnc_v1_SetBool__Output);
+    'setBlockDelete'?: (_linuxcnc_v1_SetBool__Output);
+    'mdi'?: (_linuxcnc_v1_Mdi__Output);
+    'setTrajMode'?: (_linuxcnc_v1_SetTrajMode__Output);
+    'setMaxVelocity'?: (_linuxcnc_v1_SetDouble__Output);
+    'setFeedRate'?: (_linuxcnc_v1_SetDouble__Output);
+    'setSpindleOverride'?: (_linuxcnc_v1_SetSpindleOverride__Output);
+    'overrideLimits'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'teleopEnable'?: (_linuxcnc_v1_SetBool__Output);
+    'setFeedOverrideEnable'?: (_linuxcnc_v1_SetBool__Output);
+    'setSpindleOverrideEnable'?: (_linuxcnc_v1_SetSpindleOverrideEnable__Output);
+    'setFeedHoldEnable'?: (_linuxcnc_v1_SetBool__Output);
+    'setAdaptiveFeedEnable'?: (_linuxcnc_v1_SetBool__Output);
+    'homeJoint'?: (_linuxcnc_v1_JointIndex__Output);
+    'unhomeJoint'?: (_linuxcnc_v1_JointIndex__Output);
+    'jogStop'?: (_linuxcnc_v1_JogStop__Output);
+    'jogContinuous'?: (_linuxcnc_v1_JogContinuous__Output);
+    'jogIncrement'?: (_linuxcnc_v1_JogIncrement__Output);
+    'setMinPositionLimit'?: (_linuxcnc_v1_JointLimit__Output);
+    'setMaxPositionLimit'?: (_linuxcnc_v1_JointLimit__Output);
+    'spindleOn'?: (_linuxcnc_v1_SpindleOn__Output);
+    'spindleIncrease'?: (_linuxcnc_v1_SpindleIndex__Output);
+    'spindleDecrease'?: (_linuxcnc_v1_SpindleIndex__Output);
+    'spindleOff'?: (_linuxcnc_v1_SpindleIndex__Output);
+    'spindleBrake'?: (_linuxcnc_v1_SpindleBrake__Output);
+    'setMist'?: (_linuxcnc_v1_SetBool__Output);
+    'setFlood'?: (_linuxcnc_v1_SetBool__Output);
+    'loadToolTable'?: (_linuxcnc_v1_EmptyCommand__Output);
+    'setTool'?: (_linuxcnc_v1_SetTool__Output);
+    'deleteTool'?: (_linuxcnc_v1_ToolNumber__Output);
+    'setDigitalOutput'?: (_linuxcnc_v1_DigitalOutput__Output);
+    'setAnalogOutput'?: (_linuxcnc_v1_AnalogOutput__Output);
+    'setDebugLevel'?: (_linuxcnc_v1_SetDebugLevel__Output);
+    'sendOperatorError'?: (_linuxcnc_v1_MessageCommand__Output);
+    'sendOperatorText'?: (_linuxcnc_v1_MessageCommand__Output);
+    'sendOperatorDisplay'?: (_linuxcnc_v1_MessageCommand__Output);
+    'setRapidRate'?: (_linuxcnc_v1_SetDouble__Output);
+    'command'?: "setTaskMode" | "setState" | "taskPlanSynch" | "resetInterpreter" | "programOpen" | "programClose" | "runProgram" | "pauseProgram" | "resumeProgram" | "stepProgram" | "reverseProgram" | "forwardProgram" | "stop" | "abortTask" | "setOptionalStop" | "setBlockDelete" | "mdi" | "setTrajMode" | "setMaxVelocity" | "setFeedRate" | "setSpindleOverride" | "overrideLimits" | "teleopEnable" | "setFeedOverrideEnable" | "setSpindleOverrideEnable" | "setFeedHoldEnable" | "setAdaptiveFeedEnable" | "homeJoint" | "unhomeJoint" | "jogStop" | "jogContinuous" | "jogIncrement" | "setMinPositionLimit" | "setMaxPositionLimit" | "spindleOn" | "spindleIncrease" | "spindleDecrease" | "spindleOff" | "spindleBrake" | "setMist" | "setFlood" | "loadToolTable" | "setTool" | "deleteTool" | "setDigitalOutput" | "setAnalogOutput" | "setDebugLevel" | "sendOperatorError" | "sendOperatorText" | "sendOperatorDisplay" | "setRapidRate";
+}
+//# sourceMappingURL=ExecuteCommandRequest.d.ts.map