@lemoncat7/dsh-partner 2.8.0 → 2.8.2

package/resources/skills/story-creation/upstream/skills/story-long-write/scripts/check-outline-contract.js

@@ -0,0 +1,520 @@
+#!/usr/bin/env node
+/**
+ * Deterministic 细纲 structural verifier for story-long-write.
+ *
+ * Usage:
+ *   node scripts/check-outline-contract.js --json <细纲路径...>
+ *   node scripts/check-outline-contract.js --json --project <书目录> --chapter N
+ * Exit: 0 = pass, 1 = blocking contract failures, 2 = invalid invocation.
+ *
+ * Scope is structural only: it decides whether the blueprint carries the fields,
+ * subsections and table shape the authoritative template names. It never judges
+ * whether a value is good. The contract itself sets this granularity —
+ * artifact-protocols.md 要求未知字段写 `[待补充]`，所以字段必须在场，值可以未知。
+ */
+
+'use strict'
+
+const fs = require('fs')
+const path = require('path')
+
+// 权威模板：references/workflow-outline.md 的细纲模板
+// 必填只留有证据或事故撑腰的核心字段；阶段位置、章节定位、结构公式、本章标价、闭环状态、
+// 写手自由区、契约风险、镜头准入、信息差触发点与「分辨率」列是可选的阅读体验字段——
+// 写了照样消费，没写不拦（#383 隔离实验：只补目标情绪与主角目标就复现了补满全部字段的收益）。
+const FIELDS = [
+  '核心事件', '字数目标', '字数口径', '单元ID/位置', '目标情绪',
+  '主角目标/关键选择', '章首钩子', '爽点', '本章禁止提前释放',
+]
+const SUBSECTIONS = ['内容概括', '情节安排', '人物关系和出场顺序', '情节细化']
+const FIVE_ACT = ['起因', '发展', '转折', '高潮', '结尾']
+const PLOT_HEADER_FIRST = /^(?:#|序号)$/
+// 这两个字段实测直接影响正文质量，必须有实际内容
+const INTENT_FIELDS = ['目标情绪', '主角目标/关键选择']
+const CALIBER = 'visible_chars_v1'
+// 可选字段「契约风险」只收三档；值未知可写 [待补充]。旧稿里的「风险等级」按同一字段认（旧名）。
+const CONTRACT_RISK_LEVELS = ['契约安全', '需补强', '契约破坏']
+
+// 「字数目标」「字数范围」「字数口径」的写法语法与 wordcount_core.py 逐字同构（scripts/test-storyctl.py 双跑同一批写法），
+// 细纲验收通过的写法，storyctl chapter check 不能再拒。值里一个数字都没有的目标/范围行是说明文字，不参与取值。
+const NUMBER = '([1-9][0-9]{0,2}(?:[,，][0-9]{3})+|[1-9][0-9]*)'
+const NOTE = '(?:[（(][^（）()]*[）)])?'
+const TARGET_VALUE = new RegExp(`^(?:约|大约)?[ \\t]*${NUMBER}[ \\t]*字?(?:左右)?[ \\t]*${NOTE}$`)
+const RANGE_VALUE = new RegExp(`^${NUMBER}[ \\t]*字?[ \\t]*(?:-|~|～|—|–|－|至|到)[ \\t]*${NUMBER}[ \\t]*字?[ \\t]*${NOTE}$`)
+const METRIC_VALUE = new RegExp(`^([A-Za-z0-9_-]+)[ \\t]*${NOTE}$`)
+const HAS_DIGIT = /[0-9０-９]/
+
+function fieldValues(text, label) {
+  const pattern = new RegExp(`^[ \\t>]*(?:[-*+][ \\t]*)?(?:\\*\\*)?${label}(?:\\*\\*)?[ \\t]*[:：][ \\t]*(.*?)[ \\t]*$`, 'gm')
+  const values = []
+  let match
+  const normalized = text.replace(/\r\n?/g, '\n').replace(/^\uFEFF/, '')
+  while ((match = pattern.exec(normalized)) !== null) values.push(match[1].replace(/\*\*/g, '').trim())
+  return values
+}
+
+const numericFieldValues = (text, label) => fieldValues(text, label).filter((value) => HAS_DIGIT.test(value))
+const toNumber = (raw) => Number(raw.replace(/[,，]/g, ''))
+
+function parseWordcountTarget(text) {
+  const raw = numericFieldValues(text, '字数目标')
+  if (!raw.length) return { status: 'missing', value: null, raw }
+  const matches = raw.map((value) => value.match(TARGET_VALUE))
+  if (!matches.every(Boolean)) return { status: 'invalid', value: null, raw }
+  const values = [...new Set(matches.map((match) => toNumber(match[1])))]
+  if (values.length !== 1) return { status: 'conflict', value: null, raw }
+  return { status: 'ok', value: values[0], raw }
+}
+
+function parseWordcountRange(text) {
+  const raw = numericFieldValues(text, '字数范围')
+  if (!raw.length) return { status: 'missing', value: null, raw }
+  const matches = raw.map((value) => value.match(RANGE_VALUE))
+  if (!matches.every(Boolean)) return { status: 'invalid', value: null, raw }
+  const pairs = [...new Set(matches.map((match) => `${toNumber(match[1])}-${toNumber(match[2])}`))]
+  if (pairs.length !== 1) return { status: 'invalid', value: null, raw }
+  const [min, max] = pairs[0].split('-').map(Number)
+  if (min > max) return { status: 'invalid', value: null, raw }
+  return { status: 'ok', value: { min, max }, raw }
+}
+
+function parseWordcountCaliber(text) {
+  const raw = fieldValues(text, '字数口径')
+  const matches = raw.map((value) => value.match(METRIC_VALUE))
+  return raw.length > 0 && matches.every(Boolean) && new Set(matches.map((match) => match[1])).size === 1 && matches[0][1] === CALIBER
+}
+
+function parseContractRisk(text) {
+  let raw = fieldValues(text, '契约风险')
+  if (!raw.length) raw = fieldValues(text, '风险等级')
+  if (!raw.length) return null
+  const value = raw[raw.length - 1].replace(/`/g, '')
+  if (/^\[待补充\]$/.test(value)) return { status: 'unknown', level: null, detail: '', raw: value }
+  const level = CONTRACT_RISK_LEVELS.find((name) => value.startsWith(name))
+  if (!level) return { status: 'invalid', level: null, detail: '', raw: value }
+  const detail = value.slice(level.length).replace(/^[\s；;，,。：:—\-（(]+/, '').replace(/[）)]$/, '').trim()
+  return { status: 'ok', level, detail, raw: value }
+}
+
+function fieldPattern(name) {
+  // 允许 -/*/+ 项目符号、可选 ** 加粗、全角或半角冒号
+  const escaped = name.replace(/[.*+?^${}()|[\]\\]/g, '\\$&')
+  return new RegExp(`^\\s*[-*+]\\s*\\*{0,2}${escaped}\\*{0,2}\\s*[：:]`, 'm')
+}
+
+function readUtf8(file) {
+  try {
+    const text = fs.readFileSync(file, 'utf8').replace(/^/, '')
+    return { ok: text.trim().length > 0, text }
+  } catch (error) {
+    return { ok: false, text: '', error: error.message }
+  }
+}
+
+function makeCheck(id, ok, file, evidence, expected, repair, severity = 'blocking') {
+  return {
+    id,
+    ok,
+    severity,
+    file,
+    evidence,
+    expected,
+    references: ['references/workflow-outline.md'],
+    repair,
+  }
+}
+
+function parseTableRow(line) {
+  const trimmed = line.trim()
+  if (!trimmed.startsWith('|') || !trimmed.endsWith('|')) return null
+  return trimmed.slice(1, -1).split('|').map((cell) => cell.replace(/\*\*/g, '').replace(/`/g, '').trim())
+}
+
+function resolveBookRoot(file, projectRoot) {
+  if (projectRoot) return path.resolve(projectRoot)
+  const parent = path.dirname(path.resolve(file))
+  if (path.basename(parent) === '大纲') return path.dirname(parent)
+  return null
+}
+
+// 项目引用须写目录路径；裸文件名可能指向 skill reference，不猜测其归属。
+const REF_DIR_PREFIX = /^(?:设定|大纲|追踪|正文|读者笔记|对标)\//
+
+function checkSettingRefs(text, name, file, projectRoot) {
+  const bookRoot = resolveBookRoot(file, projectRoot)
+  if (!bookRoot) {
+    return makeCheck('outline.setting-refs-exist', true, name, '未能定位书目录（细纲不在 大纲/ 下且未传 --project），跳过', '细纲引用的项目内文件真实存在', '无需修复。')
+  }
+  const refs = new Set()
+  const pattern = /`([^`\n]+?\.md)[^`\n]*`/g
+  let match
+  while ((match = pattern.exec(text)) !== null) {
+    const token = match[1].trim().replace(/\\/g, '/')
+    if (token.includes('{') || token.includes('}')) continue
+    if (REF_DIR_PREFIX.test(token) || /^\.{1,2}\//.test(token)) refs.add(token)
+  }
+  const missing = []
+  for (const token of refs) {
+    const base = /^\.{1,2}\//.test(token) ? path.dirname(path.resolve(file)) : bookRoot
+    try {
+      if (!fs.statSync(path.resolve(base, token)).isFile()) missing.push(token)
+    } catch { missing.push(token) }
+  }
+  return makeCheck(
+    'outline.setting-refs-exist',
+    missing.length === 0,
+    name,
+    missing.length ? `引用的路径不是可用文件：${missing.join('、')}` : `${refs.size} 处项目内引用全部存在`,
+    '细纲引用的每个项目内 .md 文件都真实存在——不许把槽位指向查无实据的权威文件',
+    '修正引用路径；或按新增物三级先把缺的设定落档（「写了要报」直接补并登记、「先问作者」进排纲底稿的供给自查提案），再在细纲引用。'
+  )
+}
+
+function verify(file, projectRoot = null) {
+  const name = path.basename(file)
+  const read = readUtf8(file)
+  const checks = []
+
+  checks.push(makeCheck(
+    'outline.readable',
+    read.ok,
+    name,
+    read.ok ? '文件存在且非空' : (read.error || '文件为空'),
+    '细纲文件存在且非空',
+    '只补建缺失的细纲文件，不改动同批其他章。'
+  ))
+  if (!read.ok) return report(file, checks)
+  const text = read.text
+
+  const missingFields = FIELDS.filter((field) => !fieldPattern(field).test(text))
+  checks.push(makeCheck(
+    'outline.required-fields',
+    missingFields.length === 0,
+    name,
+    missingFields.length ? `缺字段：${missingFields.join('、')}` : `${FIELDS.length} 个字段齐全`,
+    `按权威模板列出全部字段：${FIELDS.join('、')}；值未知时写 [待补充]，不杜撰剧情`,
+    '只补报告里缺的字段行；确实还定不下来的写 [待补充]，不为补字段新增副线或人物关系。'
+  ))
+
+  // 隔离实验（同章、同写作流程，只改细纲）：只补这两个字段就能复现补齐全部字段的收益，
+  // 盲评 3/3 胜过不补；补满五个字段与只补这两个不可区分。所以这两个字段不接受占位符，
+  // 其余字段仍按契约允许 [待补充]。
+  const hollow = INTENT_FIELDS.filter((field) => {
+    const match = text.match(new RegExp(`^\\s*[-*+]\\s*\\*{0,2}${field.replace('/', '\\/')}\\*{0,2}\\s*[：:]\\s*(.*)$`, 'm'))
+    if (!match) return false
+    const value = match[1].replace(/\[待补充\]/g, '').replace(/[\s、，,。;；]/g, '')
+    return value.length === 0
+  })
+  checks.push(makeCheck(
+    'outline.intent-fields-substantive',
+    hollow.length === 0,
+    name,
+    hollow.length ? `只有占位符，没有实际内容：${hollow.join('、')}` : '目标情绪与主角目标/关键选择都写了实际内容',
+    '目标情绪写清前状态→后状态；主角目标/关键选择写清本章要什么、必须做出的判断。这两项不接受 [待补充]',
+    '只把这两个字段替换成本章的实际情绪变化与实际取舍；其余字段不动。'
+  ))
+
+  const missingSubs = SUBSECTIONS.filter((sub) => !new RegExp(`^#{3,4}\\s*${sub}`, 'm').test(text))
+  checks.push(makeCheck(
+    'outline.subsections',
+    missingSubs.length === 0,
+    name,
+    missingSubs.length ? `缺小节：${missingSubs.join('、')}` : '四个小节齐全',
+    '包含 内容概括 / 情节安排 / 人物关系和出场顺序 / 情节细化 四个小节',
+    '只补缺失的小节标题及其条目，不重写已成立的内容。'
+  ))
+
+  const missingActs = FIVE_ACT.filter((act) => !fieldPattern(act).test(text))
+  checks.push(makeCheck(
+    'outline.five-act',
+    missingActs.length === 0,
+    name,
+    missingActs.length ? `五段式缺：${missingActs.join('、')}` : '五段式齐全',
+    '内容概括写全 起因 / 发展 / 转折 / 高潮 / 结尾',
+    '只补缺的那一段，不改其余四段。'
+  ))
+
+  const lines = text.split(/\r?\n/)
+  let header = null
+  for (const line of lines) {
+    const cells = parseTableRow(line)
+    // 现行模板默认四列（# / 情节点 / 功能标签 / 执行边界（禁＋放）），需要时在功能标签后加「分辨率」列成五列。
+    // 两种都收：功能标签固定在第 3 列，执行边界一律取最后一列。
+    if (cells && (cells.length === 4 || cells.length === 5) && PLOT_HEADER_FIRST.test(cells[0])) {
+      header = cells
+      break
+    }
+  }
+  const headerOk = Boolean(header)
+    && header[2].includes('功能标签')
+    && header[header.length - 1].includes('执行边界')
+    && (header.length === 4 || header[3].includes('分辨率'))
+  checks.push(makeCheck(
+    'outline.plotpoint-table',
+    headerOk,
+    name,
+    header ? `表头：${header.join(' | ')}` : '未找到 | # | 情节点 | 功能标签 | [分辨率] | 执行边界 | 表头',
+    '情节细化使用表格：# / 情节点（谁做了什么） / 功能标签 / 执行边界（禁＋放）；需要时可在功能标签后加「分辨率」列',
+    '只把情节点序列改成这张表，逐点补功能标签与执行边界；不增删情节点本身。'
+  ))
+
+  // 「放」半边：五列表或表头写明「禁＋放」的四列表，执行边界必须至少一个点解除限制，
+  // 全是禁令的情节点表实测会把整章压成同一个温度（015 章十一个点全「不许」）。表头没写「禁＋放」的四列表不追溯。
+  if (headerOk && (header.length === 5 || /放/.test(header[header.length - 1]))) {
+    const rows = []
+    for (const line of lines) {
+      const cells = parseTableRow(line)
+      if (cells && cells.length === header.length && /^\d+$/.test(cells[0])) rows.push(cells)
+    }
+    if (rows.length) {
+      const released = rows.filter((cells) => {
+        const match = cells[cells.length - 1].match(/(?:^|[。；;\s])放\s*[：:]([^]*?)(?=(?:禁|放)\s*[：:]|$)/)
+        if (!match) return false
+        const value = match[1].replace(/[\s。；;，,、\[\]【】]/g, '')
+        return value.length > 0 && !/^(?:无|暂无|待补充|待定|无缺口)$/.test(value)
+      })
+      checks.push(makeCheck(
+        'outline.plotpoint-release',
+        released.length > 0,
+        name,
+        `${rows.length} 个情节点里 ${released.length} 个写了「放」`,
+        '执行边界写成「禁＋放」两半，每章至少一个点写了「放」——放行是解除限制，不是义务',
+        '给最该出彩的一两个点补「放」半边（谁可以出声、谁可以失态、允不允许当场标价），不改情节点本身。'
+      ))
+      if (released.length > 0 && rows.length >= 3 && released.length * 3 < rows.length) {
+        checks.push(makeCheck(
+          'outline.plotpoint-release-ratio',
+          false,
+          name,
+          `${rows.length} 个情节点里只有 ${released.length} 个写了「放」（不足三分之一）`,
+          '建议至少三分之一的情节点写「放」半边，避免整章只剩禁令',
+          '按人工判断酌情补「放」；本项不阻断。',
+          'advisory'
+        ))
+      }
+    }
+  }
+
+  // 章级「禁止提前释放」只写本章特有的三五条；条目过多多半是把卷级常任禁忌逐章复读了。
+  const releaseMatch = text.match(/^\s*[-*+]\s*\*{0,2}本章禁止提前释放\*{0,2}\s*[：:]\s*(.*)$/m)
+  if (releaseMatch) {
+    const items = releaseMatch[1].split(/[、；;，,\/]/).map((s) => s.trim()).filter(Boolean)
+    if (items.length > 5) {
+      checks.push(makeCheck(
+        'outline.release-brevity',
+        false,
+        name,
+        `本章禁止提前释放列了 ${items.length} 条`,
+        '章级只写本章特有的三五条；卷级常任禁忌写在卷纲「本卷禁碰的终局底牌」，不逐章复读',
+        '把与卷纲常任重复的条目删掉，只留本章特有；本项不阻断。',
+        'advisory'
+      ))
+    }
+  }
+
+  checks.push(checkSettingRefs(text, name, file, projectRoot))
+
+  const targetParse = parseWordcountTarget(text)
+  const rangeParse = parseWordcountRange(text)
+  const target = targetParse.value
+  const caliberOk = parseWordcountCaliber(text)
+  const targetLabel = { ok: target, missing: '未识别', invalid: `写法认不出（${targetParse.raw.join('、')}）`, conflict: `多个不同的值（${targetParse.raw.join('、')}）` }[targetParse.status]
+  const rangeLabel = rangeParse.status === 'invalid' ? `；字数范围写法不对（${rangeParse.raw.join('、')}）` : (rangeParse.value ? `；字数范围：${rangeParse.value.min}-${rangeParse.value.max}` : '')
+  checks.push(makeCheck(
+    'outline.wordcount-target',
+    targetParse.status === 'ok' && target >= 500 && target <= 20000 && caliberOk && rangeParse.status !== 'invalid',
+    name,
+    `字数目标：${targetLabel}；字数口径 ${CALIBER}：${caliberOk}${rangeLabel}`,
+    `字数目标为 500-20000 的正整数（可写「2300 字」「约 2300」「2,300」，可带括号备注），并声明 字数口径：${CALIBER}；作者给了上下限时另写一行「字数范围：2000-2600」`,
+    '只补字数目标、字数范围或字数口径行，不调整情节安排。'
+  ))
+
+  const risk = parseContractRisk(text)
+  if (risk) {
+    checks.push(makeCheck(
+      'outline.contract-risk',
+      risk.status !== 'invalid',
+      name,
+      risk.status === 'invalid' ? `契约风险写的是「${risk.raw}」` : `契约风险：${risk.level || '[待补充]'}`,
+      `契约风险只写 ${CONTRACT_RISK_LEVELS.join(' / ')} 三档之一（需补强时后面写补强方式），未定写 [待补充]`,
+      '只把契约风险改成三档之一，不改其他字段。'
+    ))
+  }
+
+  return report(file, checks, {
+    wordcount: {
+      target,
+      target_status: targetParse.status,
+      range: rangeParse.value,
+      range_status: rangeParse.status,
+    },
+    contract_risk: risk ? { level: risk.level, detail: risk.detail, status: risk.status } : null,
+  })
+}
+
+function report(file, checks, extra = {}) {
+  const failures = checks.filter((check) => !check.ok && check.severity === 'blocking')
+  const advisories = checks.filter((check) => !check.ok && check.severity === 'advisory')
+  return {
+    schema_version: 1,
+    verifier: 'story-long-write.outline-contract',
+    file: path.resolve(file),
+    ok: failures.length === 0,
+    ...extra,
+    checks,
+    failures,
+    advisories,
+    repair_scope: failures.map((failure) => ({
+      id: failure.id,
+      file: failure.file,
+      evidence: failure.evidence,
+      expected: failure.expected,
+      references: failure.references,
+      repair: failure.repair,
+    })),
+  }
+}
+
+function resolveChapter(project, chapter) {
+  const dir = path.join(project, '大纲')
+  let entries
+  try {
+    entries = fs.readdirSync(dir)
+  } catch (error) {
+    return { error: `无法读取 ${dir}：${error.message}` }
+  }
+  const wanted = Number(chapter)
+  const hit = entries.find((entry) => {
+    const match = entry.match(/^细纲_第0*(\d+)章.*\.md$/)
+    return match && Number(match[1]) === wanted
+  })
+  if (!hit) return { error: `${dir} 下没有第 ${wanted} 章细纲` }
+  return { file: path.join(dir, hit) }
+}
+
+// --supply：批末验证供给自查已落盘。新书写在卷纲旁的 排纲底稿_{单元ID}.md；老卷纲写在单元卡块内。
+function hasSupplyHeading(text) {
+  return text.split(/\r?\n/).some((line) => {
+    const heading = line.replace(/\*\*/g, '').match(/^#{1,6}\s+(.+)$/)
+    return Boolean(heading) && /^供给自查(?:\s|[（(]|$)/.test(heading[1])
+  })
+}
+
+function verifySupply(volumeFile, unitId) {
+  const draftFile = path.join(path.dirname(volumeFile), `排纲底稿_${unitId}.md`)
+  const draft = readUtf8(draftFile)
+  if (draft.ok) {
+    const ok = hasSupplyHeading(draft.text)
+    return {
+      schema_version: 1, verifier: 'story-long-write.outline-supply', file: path.resolve(draftFile), unit: unitId, ok,
+      evidence: ok ? '排纲底稿含「供给自查」小节' : `${path.basename(draftFile)} 里没有「供给自查」小节——每批出细纲前须做供给自查（含「无缺口」情形），见 workflow-outline.md 步骤 3`,
+    }
+  }
+  const read = readUtf8(volumeFile)
+  if (!read.ok) {
+    return { schema_version: 1, verifier: 'story-long-write.outline-supply', file: path.resolve(volumeFile), unit: unitId, ok: false, evidence: read.error || '卷纲文件为空' }
+  }
+  // 只检查目标单元内的标题，不把正文提及或代码示例当成小节。
+  let fence = null
+  const lines = read.text.split(/\r?\n/).map((line) => {
+    const marker = line.match(/^\s{0,3}(`{3,}|~{3,})/)
+    if (marker) {
+      if (!fence) fence = marker[1]
+      else if (marker[1][0] === fence[0] && marker[1].length >= fence.length) fence = null
+      return ''
+    }
+    return fence ? '' : line.replace(/\*\*/g, '')
+  })
+  const headings = []
+  for (let index = 0; index < lines.length; index++) {
+    const heading = lines[index].match(/^(#{1,6})\s+(.+)$/)
+    if (heading) headings.push({ index, level: heading[1].length, title: heading[2] })
+  }
+  const card = headings.find((heading) => {
+    const id = heading.title.match(/剧情单元\s+([A-Za-z][\w-]*)/)
+    if (id) return id[1] === unitId
+    const end = headings.find((next) => next.index > heading.index)?.index ?? lines.length
+    return lines.slice(heading.index + 1, end).some((line) => {
+      const field = line.match(/^\s*[-*+]\s*单元ID\s*[：:]\s*([A-Za-z][\w-]*)\s*$/)
+      return field?.[1] === unitId
+    })
+  })
+  const end = card ? (headings.find((next) => next.index > card.index && next.level <= card.level)?.index ?? lines.length) : 0
+  const ok = Boolean(card) && headings.some((heading) => heading.index > card.index && heading.index < end && /^供给自查(?:\s|[（(]|$)/.test(heading.title))
+  if (!card) {
+    return { schema_version: 1, verifier: 'story-long-write.outline-supply', file: path.resolve(volumeFile), unit: unitId, ok: false, evidence: `卷纲中未找到剧情单元 ${unitId}` }
+  }
+  return {
+    schema_version: 1,
+    verifier: 'story-long-write.outline-supply',
+    file: path.resolve(volumeFile),
+    unit: unitId,
+    ok,
+    evidence: ok ? '单元卡含「供给自查」小节' : `没有 排纲底稿_${unitId}.md，剧情单元 ${unitId} 的卡内也没有「供给自查」小节——每批出细纲前须做供给自查（含「无缺口」情形），见 workflow-outline.md 步骤 3`,
+  }
+}
+
+function parseArgs(argv) {
+  const files = []
+  let project = null
+  let chapter = null
+  let supply = null
+  for (let index = 0; index < argv.length; index++) {
+    const arg = argv[index]
+    if (arg === '--json') continue
+    if (arg === '--supply') {
+      if (index + 2 >= argv.length) return null
+      supply = { volumeFile: argv[++index], unitId: argv[++index] }
+      continue
+    }
+    if (arg === '--project' || arg === '--chapter') {
+      if (index + 1 >= argv.length || argv[index + 1].startsWith('--')) return null
+      const value = argv[++index]
+      if (arg === '--project') project = value
+      else chapter = value
+      continue
+    }
+    if (arg.startsWith('--')) return null
+    files.push(arg)
+  }
+  if (supply) {
+    if (project || chapter || files.length) return null
+    return { supply }
+  }
+  if (project || chapter) {
+    if (!project || !chapter || files.length || !/^\d+$/.test(chapter)) return null
+    return { project, chapter }
+  }
+  if (!files.length) return null
+  return { files }
+}
+
+function main(argv) {
+  const parsed = parseArgs(argv)
+  if (!parsed) {
+    process.stderr.write('用法: node scripts/check-outline-contract.js --json <细纲路径...> | --json --project <书目录> --chapter N | --json --supply <卷纲路径> <单元ID>\n')
+    return 2
+  }
+  if (parsed.supply) {
+    const supplyReport = verifySupply(parsed.supply.volumeFile, parsed.supply.unitId)
+    process.stdout.write(`${JSON.stringify(supplyReport, null, 2)}\n`)
+    return supplyReport.ok ? 0 : 1
+  }
+  let targets = parsed.files
+  if (!targets) {
+    const resolved = resolveChapter(parsed.project, parsed.chapter)
+    if (resolved.error) {
+      process.stderr.write(`${resolved.error}\n`)
+      return 2
+    }
+    targets = [resolved.file]
+  }
+  const reports = targets.map((file) => verify(file, parsed.project || null))
+  const ok = reports.every((entry) => entry.ok)
+  process.stdout.write(`${JSON.stringify(reports.length === 1 ? reports[0] : reports, null, 2)}\n`)
+  return ok ? 0 : 1
+}
+
+if (require.main === module) process.exitCode = main(process.argv.slice(2))
+
+module.exports = { verify, parseWordcountTarget, parseWordcountRange, parseContractRisk, FIELDS, SUBSECTIONS, FIVE_ACT }