@jjlmoya/utils-diy 1.11.0 → 1.13.0

package/src/tool/cutOptimizer/i18n/ko.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'cut-optimizer';
 const title = '목재 및 판재 절단 최적화 계산기';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: '자주 묻는 질문',
   faq: faqData,
-  bibliographyTitle: '기술 참고 자료',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/nl.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'zaagplan-optimalisatie';
 const title = 'Zaagplan Optimalisatie voor Latten en Platen';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Veelgestelde Vragen',
   faq: faqData,
-  bibliographyTitle: 'Technische Referenties',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/pl.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'optymalizator-ciecia';
 const title = 'Optymalizator Cięcia Listew i Płyt';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Często Zadawane Pytania',
   faq: faqData,
-  bibliographyTitle: 'Referencje Techniczne',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/pt.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'otimizador-corte';
 const title = 'Otimizador de Cortes de Ripas e Painéis';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Perguntas Frequentes',
   faq: faqData,
-  bibliographyTitle: 'Referências Técnicas',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/ru.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'optimizator-raskroya';
 const title = 'Оптимизатор раскроя полотна и досок';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Часто задаваемые вопросы',
   faq: faqData,
-  bibliographyTitle: 'Технические справочники',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/sv.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'kapoptimering';
 const title = 'Kapoptimering för reglar och skivor';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Vanliga frågor',
   faq: faqData,
-  bibliographyTitle: 'Tekniska referenser',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/tr.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'kesim-optimizasyonu';
 const title = 'Çıta ve Panel Kesim Optimizasyonu';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: 'Sıkça Sorulan Sorular',
   faq: faqData,
-  bibliographyTitle: 'Teknik Referanslar',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/i18n/zh.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { CutOptimizerUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'cut-optimizer';
 const title = '木材与板材切割优化计算器';
@@ -89,17 +90,7 @@ export const content: ToolLocaleContent<CutOptimizerUI> = {
   description,
   faqTitle: '常见问题',
   faq: faqData,
-  bibliographyTitle: '技术参考',
-  bibliography: [
-    {
-      name: 'Cutting Stock Problem: Wikipedia',
-      url: 'https://en.wikipedia.org/wiki/Cutting_stock_problem',
-    },
-    {
-      name: 'Bin Packing Problem: Wolfram MathWorld',
-      url: 'https://mathworld.wolfram.com/BinPackingProblem.html',
-    },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/cutOptimizer/seo.astro

@@ -6,9 +6,10 @@ import type { KnownLocale } from '../../types';
 interface Props {
   locale?: KnownLocale;
 }
+
 const { locale = 'es' } = Astro.props;
 const content = await cutOptimizer.i18n[locale]?.();
 if (!content) return null;
 ---
 
-<SEORenderer content={{ locale: locale as string, sections: content.seo }} />
+{content.seo?.length > 0 && <SEORenderer content={{ locale, sections: content.seo }} />}

package/src/tool/drillCalculator/bibliography.astro

@@ -1,13 +1,6 @@
 ---
 import { Bibliography as SharedBibliography } from '@jjlmoya/utils-shared';
-import { drillCalculator } from './index';
-import type { KnownLocale } from '../../types';
-
-interface Props {
-  locale?: KnownLocale;
-}
-const { locale = 'es' } = Astro.props;
-const content = await drillCalculator.i18n[locale]?.();
+import { bibliography } from './bibliography';
 ---
 
-{content && <SharedBibliography links={content.bibliography} />}
+<SharedBibliography links={bibliography} />

package/src/tool/drillCalculator/bibliography.ts

@@ -0,0 +1,12 @@
+import type { BibliographyEntry } from '../../types';
+
+export const bibliography: BibliographyEntry[] = [
+  {
+    name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae',
+    url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions',
+  },
+  {
+    name: 'Machine Calculations and Workshop Tables — Machinery Handbook',
+    url: 'https://www.google.com/search?q=machinery+handbook+cutting+speeds',
+  },
+];

package/src/tool/drillCalculator/i18n/de.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'drehzahlrechner-bohren-fraesen';
 const title = 'Drehzahlrechner Bohren und Fräsen';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Häufig gestellte Fragen',
   faq: faqData,
-  bibliographyTitle: 'Technische Referenzen',
-  bibliography: [
-    { name: 'Sandvik Coromant: Formeln für Schnittgeschwindigkeit und Vorschub', url: 'https://www.sandvik.coromant.com/de-de/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Tabellenbuch Metall', url: 'https://www.europa-lehrmittel.de/' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/en.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'drill-rpm-calculator';
 const title = 'Drill and Machining RPM Calculator';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Frequently Asked Questions',
   faq: faqData,
-  bibliographyTitle: 'Technical References',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Machine Calculations and Workshop Tables — Machinery Handbook', url: 'https://www.google.com/search?q=machinery+handbook+cutting+speeds' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/es.ts

@@ -1,3 +1,4 @@
+import { bibliography } from '../bibliography';
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Preguntas Frecuentes',
   faq: faqData,
-  bibliographyTitle: 'Referencias Técnicas',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Máquinas. Cálculos de taller — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/fr.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'calculateur-tours-taraudage';
 const title = 'Calculateur RPM Perçage et Fraisage';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Questions Fréquentes',
   faq: faqData,
-  bibliographyTitle: 'Références Techniques',
-  bibliography: [
-    { name: 'Sandvik Coromant: Formules de Vitesse de Coupe et d\'Avance', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Calculs d\'usinage et Tables de l\'Atelier — Manuel du Technicien', url: 'https://www.google.com/search?q=calculs+usinage+vitesses+coupe' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/id.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'kalkulator-kecepatan-bor-frais';
 const title = 'Kalkulator RPM Pemesinan dan Bor';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Pertanyaan Umum',
   faq: faqData,
-  bibliographyTitle: 'Referensi Teknis',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Mesin. Perhitungan Bengkel — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/it.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'calcolatore-giri-trapano-fresa';
 const title = 'Calcolatore RPM Lavorazione e Perforazione';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Domande Frequenti',
   faq: faqData,
-  bibliographyTitle: 'Riferimenti Tecnici',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Macchine. Calcoli d\'officina — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/ja.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'drill-rpm-calculator';
 const title = '穴あけ・切削回転数計算機';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'よくある質問',
   faq: faqData,
-  bibliographyTitle: '技術リファレンス',
-  bibliography: [
-    { name: 'サンドビック・コロマント：切削速度・送り計算式', url: 'https://www.sandvik.coromant.com/ja-jp/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: '機械工作計算表', url: 'https://www.google.com/search?q=機械工作計算表+Casillas' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/ko.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'drill-rpm-calculator';
 const title = '가공 및 드릴 회전수 계산기';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: '자주 묻는 질문',
   faq: faqData,
-  bibliographyTitle: '기술 참고 자료',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: '기계 공작법 계산표 — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/nl.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'toerental-rekenmachine-boren-frezen';
 const title = 'RPM Toerental Calculator voor Boren en Frezen';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Veelgestelde Vragen',
   faq: faqData,
-  bibliographyTitle: 'Technische Referenties',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Machines. Werkplaatsberekeningen — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/pl.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'kalkulator-obrotow-wiercenia-frezowania';
 const title = 'Kalkulator RPM Obróbki i Wiercenia';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Często Zadawane Pytania',
   faq: faqData,
-  bibliographyTitle: 'Referencje Techniczne',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Poradnik mechanika — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/pt.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'calculadora-usinagem-furo';
 const title = 'Calculadora RPM de Usinagem e Furação';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Perguntas Frequentes',
   faq: faqData,
-  bibliographyTitle: 'Referências Técnicas',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Máquinas. Cálculos de oficina — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+faller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/ru.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'kalkulyator-oborotov-sverleniya';
 const title = 'Калькулятор оборотов (RPM) для сверления и фрезерования';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Часто задаваемые вопросы',
   faq: faqData,
-  bibliographyTitle: 'Технические справочники',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Справочник механика — А.Л. Касильяс (A.L. Casillas)', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/sv.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'varvtalskalkylator-borrning';
 const title = 'Varvtalskalkylator för borrning och fräsning';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Vanliga frågor',
   faq: faqData,
-  bibliographyTitle: 'Tekniska referenser',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Maskiner. Verkstadsberäkningar — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/tr.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'matkap-devir-hesaplayici';
 const title = 'İşleme ve Matkap RPM Hesaplayıcı';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: 'Sıkça Sorulan Sorular',
   faq: faqData,
-  bibliographyTitle: 'Teknik Referanslar',
-  bibliography: [
-    { name: 'Sandvik Coromant: Cutting Speed and Feed Rate Formulae', url: 'https://www.sandvik.coromant.com/en-gb/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: 'Makineler. Atölye Hesaplamaları — A.L. Casillas', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/i18n/zh.ts

@@ -1,6 +1,7 @@
 import type { WithContext, FAQPage, HowToThing, SoftwareApplication } from 'schema-dts';
 import type { ToolLocaleContent } from '../../../types';
 import type { DrillCalculatorUI } from '../ui';
+import { bibliography } from '../bibliography';
 
 const slug = 'drill-rpm-calculator';
 const title = '钻孔与切削转速计算器';
@@ -76,11 +77,7 @@ export const content: ToolLocaleContent<DrillCalculatorUI> = {
   description,
   faqTitle: '常见问题',
   faq: faqData,
-  bibliographyTitle: '技术参考',
-  bibliography: [
-    { name: 'Sandvik Coromant: 切削速度与进给率公式', url: 'https://www.sandvik.coromant.com/zh-cn/knowledge/machining-formulas-definitions/general-turning-formulas-definitions' },
-    { name: '机械加工工艺手册', url: 'https://www.google.com/search?q=Casillas+Maquinas+Calculos+de+taller' },
-  ],
+  bibliography,
   howTo: howToData,
   schemas: [faqSchema, howToSchema, appSchema],
   seo: [

package/src/tool/drillCalculator/seo.astro

@@ -6,9 +6,10 @@ import type { KnownLocale } from '../../types';
 interface Props {
   locale?: KnownLocale;
 }
+
 const { locale = 'es' } = Astro.props;
 const content = await drillCalculator.i18n[locale]?.();
 if (!content) return null;
 ---
 
-<SEORenderer content={{ locale: locale as string, sections: content.seo }} />
+{content.seo?.length > 0 && <SEORenderer content={{ locale, sections: content.seo }} />}

package/src/tool/drillSharpener/bibliography.astro

@@ -1,13 +1,6 @@
 ---
 import { Bibliography as SharedBibliography } from '@jjlmoya/utils-shared';
-import { drillSharpener } from './index';
-import type { KnownLocale } from '../../types';
-
-interface Props {
-  locale?: KnownLocale;
-}
-const { locale = 'es' } = Astro.props;
-const content = await drillSharpener.i18n[locale]?.();
+import { bibliography } from './bibliography';
 ---
 
-{content && <SharedBibliography links={content.bibliography} />}
+<SharedBibliography links={bibliography} />

package/src/tool/drillSharpener/bibliography.ts

@@ -0,0 +1,16 @@
+import type { BibliographyEntry } from '../../types';
+
+export const bibliography: BibliographyEntry[] = [
+  {
+    name: 'Workshop Manual - Drill Bit Sharpening (PDF)',
+    url: 'https://www.scribd.com/document/486692441/Afilado-Manual-de-Brocas',
+  },
+  {
+    name: 'Metal Technology - Drill Angles',
+    url: 'https://en.wikipedia.org/wiki/Drill_bit',
+  },
+  {
+    name: 'Mechanical Workshop Sharpening Standards',
+    url: 'https://www.iso.org/',
+  },
+];