@itwin/core-geometry 4.1.0-dev.8 → 4.1.0-dev.81

package/lib/cjs/polyface/PolyfaceQuery.d.ts

@@ -1,4 +1,8 @@
+/** @packageDocumentation
+ * @module Polyface
+ */
 import { BagOfCurves, CurveCollection } from "../curve/CurveCollection";
+import { LinearCurvePrimitive } from "../curve/CurvePrimitive";
 import { LineSegment3d } from "../curve/LineSegment3d";
 import { LineString3d } from "../curve/LineString3d";
 import { Loop } from "../curve/Loop";
@@ -6,14 +10,55 @@ import { Angle } from "../geometry3d/Angle";
 import { GrowableXYZArray } from "../geometry3d/GrowableXYZArray";
 import { Plane3dByOriginAndUnitNormal } from "../geometry3d/Plane3dByOriginAndUnitNormal";
 import { Point3d, Vector3d } from "../geometry3d/Point3dVector3d";
+import { Ray3d } from "../geometry3d/Ray3d";
 import { Matrix4d } from "../geometry4d/Matrix4d";
 import { MomentData } from "../geometry4d/MomentData";
 import { HalfEdgeGraph } from "../topology/Graph";
+import { FacetIntersectOptions, FacetLocationDetail } from "./FacetLocationDetail";
 import { IndexedEdgeMatcher, SortableEdgeCluster } from "./IndexedEdgeMatcher";
+import { Range2dSearchInterface } from "./multiclip/Range2dSearchInterface";
 import { IndexedPolyface, Polyface, PolyfaceVisitor } from "./Polyface";
 import { RangeLengthData } from "./RangeLengthData";
-import { Ray3d } from "../geometry3d/Ray3d";
-import { FacetIntersectOptions, FacetLocationDetail } from "./FacetLocationDetail";
+/**
+ * Options carrier for sweeping linework onto meshes.
+ * * The create method initializes all options.
+ * @public
+ */
+export declare class SweepLineStringToFacetsOptions {
+    /** vector "towards the eye"
+     * * In the common case of sweeping to an XY (e.g. ground or DTM) mesh,
+     *    use the positive Z vector as an up vector.
+     * * In general case, this is a vector from the mesh towards an eye at infinity.
+     */
+    vectorToEye: Vector3d;
+    /** true to collect edges from facets that face towards the eye */
+    collectOnForwardFacets: boolean;
+    /** true to collect facets that are "on the side", i.e. their outward vector is perpendicular to vectorToEye. */
+    collectOnSideFacets: boolean;
+    /** true to collect facets that face away from the eye */
+    collectOnRearFacets: boolean;
+    /** (small) angle to use as tolerance for deciding if a facet is "on the side".  Default (if given in degrees) is Geometry.smallAngleDegrees */
+    sideAngle: Angle;
+    /** option to assemble lines into chains */
+    assembleChains: boolean;
+    /** constructor -- captures fully-checked parameters from static create method.
+    */
+    private constructor();
+    /** Create an options structure.
+     * * Default vectorToEye is positive Z
+     * * Default sideAngle has radians value Geometry.smallAngleRadians
+     * * Default assembleChains is true
+     * * Default collectOnForwardFacets, collectOnSideFacets, collectOnRearFacets are all true.
+     */
+    static create(vectorToEye?: Vector3d, sideAngle?: Angle, assembleChains?: boolean, collectOnForwardFacets?: boolean, collectOnSideFacets?: boolean, collectOnRearFacets?: boolean): SweepLineStringToFacetsOptions;
+    /** Return true if all outputs are requested */
+    get collectAll(): boolean;
+    /** Decide if the instance flags accept this facet.
+     * * Facets whose facet normal have positive, zero, or negative dot product with the vectorToEye are forward, side, and rear.
+     * * Undefined facet normal returns false
+    */
+    collectFromThisFacetNormal(facetNormal: Vector3d | undefined): boolean;
+}
 /**
  * Options carrier for cloneWithHolesFilled
  * @public
@@ -200,7 +245,7 @@ export declare class PolyfaceQuery {
     static announceBoundaryEdges(source: Polyface | PolyfaceVisitor | undefined, announceEdge: (pointA: Point3d, pointB: Point3d, indexA: number, indexB: number, facetIndex: number) => void, includeDanglers?: boolean, includeMismatch?: boolean, includeNull?: boolean): void;
     /** Find segments (within the linestring) which project to facets.
      * * Announce each pair of linestring segment and on-facet segment through a callback.
-     * * Facets are ASSUMED to be convex and planar.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
     static announceSweepLinestringToConvexPolyfaceXY(linestringPoints: GrowableXYZArray, polyface: Polyface, announce: AnnounceDrapePanel): any;
     /** Execute context.projectToPolygon until its work estimates accumulate to workLimit  */
@@ -221,7 +266,7 @@ export declare class PolyfaceQuery {
     static awaitBlockCount: number;
     /** Find segments (within the linestring) which project to facets.
      * * Announce each pair of linestring segment and on-facet segment through a callback.
-     * * Facets are ASSUMED to be convex and planar.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      * * REMARK: Although this is public, the usual use is via slightly higher level public methods, viz:
      *   * asyncSweepLinestringToFacetsXYReturnChains
      * @internal
@@ -268,14 +313,14 @@ export declare class PolyfaceQuery {
     static cloneWithMaximalPlanarFacets(mesh: Polyface | PolyfaceVisitor): IndexedPolyface | undefined;
     /**
      * Return a mesh with "some" holes filled in with new facets.
-     *  * The candidates to be filled are all loops returned by boundaryChainsAsLineString3d
-     *  * unclosed chains are rejected.
-     *  * optionally also copy the original mesh, so the composite is a clone with holes filled.
+     *  * Candidate chains are computed by [[announceBoundaryChainsAsLineString3d]].
+     *  * Unclosed chains are rejected.
+     *  * Closed chains are triangulated and returned as a mesh.
      *  * The options structure enforces restrictions on how complicated the hole filling can be:
      *     * maxEdgesAroundHole -- holes with more edges are skipped
      *     * maxPerimeter -- holes with larger summed edge lengths are skipped.
      *     * upVector -- holes that do not have positive area along this view are skipped.
-     *     * includeOriginalMesh -- includes the original mesh in the output mesh.
+     *     * includeOriginalMesh -- includes the original mesh in the output mesh, so the composite mesh is a clone with holes filled
      * @param mesh existing mesh
      * @param options options controlling the hole fill.
      * @param unfilledChains optional array to receive the points around holes that were not filled.
@@ -309,24 +354,58 @@ export declare class PolyfaceQuery {
      * @return collection of facet index arrays, one per connected component
      */
     static partitionFacetIndicesByEdgeConnectedComponent(polyface: Polyface | PolyfaceVisitor, stopAtVisibleEdges?: boolean): number[][];
-    /** Find segments (within the linestring) which project to facets.
-     * * Assemble each segment pair as a facet in a new polyface
-     * * Facets are ASSUMED to be convex and planar.
+    /** Find segments (within the line string) which project to facets.
+     * * Assemble each input segment paired with its projected segment/point as a quad/triangle facet in a new polyface.
+     * * Input facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
+    static sweepLineStringToFacetsXYReturnSweptFacets(lineStringPoints: GrowableXYZArray, polyface: Polyface): Polyface;
+    /** @deprecated in 4.x. Use sweepLineStringToFacetsXYReturnSweptFacets instead. */
     static sweepLinestringToFacetsXYreturnSweptFacets(linestringPoints: GrowableXYZArray, polyface: Polyface): Polyface;
-    /** Find segments (within the linestring) which project to facets.
-     * * Return collected line segments
+    /**
+     * Sweep the line string to intersections with a mesh.
+     * * Return collected line segments.
+     * * If no options are given, the default sweep direction is the z-axis, and chains are assembled and returned.
+     * * See [[SweepLineStringToFacetsOptions]] for input and output options, including filtering by forward/side/rear facets.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the sweep direction.
      */
+    static sweepLineStringToFacets(linestringPoints: GrowableXYZArray, polyfaceOrVisitor: Polyface | PolyfaceVisitor, options?: SweepLineStringToFacetsOptions): LinearCurvePrimitive[];
+    /**
+     * Sweep the line string in the z-direction to intersections with a mesh, using a search object for speedup.
+     * @param lineStringPoints input line string to drape on the mesh
+     * @param polyfaceOrVisitor mesh, or mesh visitor to traverse only part of a mesh
+     * @param searchByReadIndex object for searching facet 2D ranges tagged by mesh read index
+     * @example Using a 5x5 indexed search grid:
+     * ```
+     * const xyRange = Range2d.createFrom(myPolyface.range());
+     * const searcher = GriddedRaggedRange2dSetWithOverflow.create<number>(xyRange, 5, 5)!;
+     * for (const visitor = myPolyface.createVisitor(0); visitor.moveToNextFacet();) {
+     *   searcher.addRange(visitor.point.getRange(), visitor.currentReadIndex());
+     * }
+     * const drapedLineStrings = PolyfaceQuery.sweepLineStringToFacetsXY(lineString, myPolyface, searcher);
+     * ```
+     * @returns collected line strings
+     */
+    static sweepLineStringToFacetsXY(lineStringPoints: GrowableXYZArray | Point3d[], polyfaceOrVisitor: Polyface | PolyfaceVisitor, searchByReadIndex: Range2dSearchInterface<number>): LineString3d[];
+    /** Find segments (within the linestring) which project to facets.
+      * * Return collected line segments.
+      * * This calls [[sweepLineStringToFacets]] with options created by
+      *   `const options = SweepLineStringToFacetsOptions.create(Vector3d.unitZ(), Angle.createSmallAngle(),false, true, true, true);`
+      * @deprecated in 4.x. Use [[sweepLineStringToFacets]] to get further options.
+      */
     static sweepLinestringToFacetsXYReturnLines(linestringPoints: GrowableXYZArray, polyface: Polyface): LineSegment3d[];
     /** Find segments (within the linestring) which project to facets.
      * * Return chains.
+     * * This calls [[sweepLineStringToFacets]] with options created by
+     *   `const options = SweepLineStringToFacetsOptions.create(Vector3d.unitZ(), Angle.createSmallAngle(),true, true, true, true);`
+     * @deprecated in 4.x. Use [[sweepLineStringToFacets]] to get further options.
      */
     static sweepLinestringToFacetsXYReturnChains(linestringPoints: GrowableXYZArray, polyface: Polyface): LineString3d[];
     /** Find segments (within the linestring) which project to facets.
      * * This is done as a sequence of "await" steps.
      * * Each "await" step deals with approximately PolyfaceQuery.asyncWorkLimit pairings of (linestring edge) with (facet edge)
-     *  * PolyfaceQuery.setAsyncWorkLimit () to change work blocks from default
+     * * PolyfaceQuery.setAsyncWorkLimit() to change work blocks from default
      * * Return chains.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
     static asyncSweepLinestringToFacetsXYReturnChains(linestringPoints: GrowableXYZArray, polyface: Polyface): Promise<LineString3d[]>;
     /**

package/lib/cjs/polyface/PolyfaceQuery.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"PolyfaceQuery.d.ts","sourceRoot":"","sources":["../../../src/polyface/PolyfaceQuery.ts"],"names":[],"mappings":"AAWA,OAAO,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,0BAA0B,CAAC;AAGxE,OAAO,EAAE,aAAa,EAAE,MAAM,wBAAwB,CAAC;AACvD,OAAO,EAAE,YAAY,EAAE,MAAM,uBAAuB,CAAC;AACrD,OAAO,EAAE,IAAI,EAAE,MAAM,eAAe,CAAC;AAGrC,OAAO,EAAE,KAAK,EAAE,MAAM,qBAAqB,CAAC;AAE5C,OAAO,EAAE,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAClE,OAAO,EAAE,4BAA4B,EAAE,MAAM,4CAA4C,CAAC;AAC1F,OAAO,EAAE,OAAO,EAAE,QAAQ,EAAE,MAAM,+BAA+B,CAAC;AAGlE,OAAO,EAAE,QAAQ,EAAE,MAAM,wBAAwB,CAAC;AAClD,OAAO,EAAE,UAAU,EAAE,MAAM,0BAA0B,CAAC;AAGtD,OAAO,EAAY,aAAa,EAAgB,MAAM,mBAAmB,CAAC;AAI1E,OAAO,EAAE,kBAAkB,EAAgB,mBAAmB,EAAE,MAAM,sBAAsB,CAAC;AAK7F,OAAO,EAAE,eAAe,EAAE,QAAQ,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AAExE,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAC;AAIpD,OAAO,EAAE,KAAK,EAAE,MAAM,qBAAqB,CAAC;AAC5C,OAAO,EAA6B,qBAAqB,EAAE,mBAAmB,EAA+D,MAAM,uBAAuB,CAAC;AAE3K;;;GAGG;AACH,MAAM,WAAW,eAAe;IAC9B,8EAA8E;IAC9E,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,yEAAyE;IACzE,kBAAkB,CAAC,EAAE,MAAM,CAAC;IAC5B;;OAEG;IACH,QAAQ,CAAC,EAAE,QAAQ,CAAC;IACpB,gGAAgG;IAChG,mBAAmB,CAAC,EAAE,OAAO,CAAC;CAC/B;AACD;;;;EAIE;AACF,MAAM,WAAW,gCAAgC;IAC/C,oCAAoC,CAAC,EAAE,OAAO,CAAC;IAC/C,sBAAsB,CAAC,EAAE,OAAO,CAAC;IACjC,sBAAsB,CAAC,EAAE,OAAO,CAAC;IACjC,yBAAyB,CAAC,EAAE,OAAO,CAAC;CACrC;AACD;;;;;GAKG;AACH,qBAAa,iBAAiB;IAC5B,wDAAwD;IACjD,+BAA+B,EAAE,KAAK,CAAC;IAC9C,wEAAwE;IACjE,oCAAoC,EAAE,KAAK,CAAC;IACnD,wFAAwF;IACjF,0BAA0B,EAAE,KAAK,CAAC;IACzC;;OAEG;IACI,cAAc,CAAC,EAAE,gCAAgC,CAAC;IAEzD,4CAA4C;IAC5C,OAAO;IAQP;;;;;;OAMG;WACW,MAAM,CAClB,+BAA+B,GAAE,KAA+B,EAChE,oCAAoC,GAAE,KAA+B,EACrE,8BAA8B,GAAE,KAAgC;CAanE;AAED;;;GAGG;AACH,MAAM,WAAW,wBAAwB;IACvC,6BAA6B;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,qDAAqD;IACrD,iCAAiC,CAAC,EAAE,UAAU,CAAC;IAC/C,qDAAqD;IACrD,iCAAiC,CAAC,EAAE,UAAU,CAAC;CAChD;AACD;;;GAGG;AACH,oBAAY,6BAA6B;IACvC,oCAAoC;IACpC,UAAU,IAAI;IACd,6CAA6C;IAC7C,SAAS,IAAI;IACb,0CAA0C;IAC1C,SAAS,IAAI;IACb,8DAA8D;IAC9D,iBAAiB,IAAI;CACtB;AACD;;GAEG;AACH,qBAAa,aAAa;IACxB,0EAA0E;WAC5D,aAAa,CAAC,OAAO,EAAE,eAAe;IAIpD,+DAA+D;WACjD,sBAAsB,CAAC,QAAQ,EAAE,QAAQ,GAAG,WAAW;IASrE;;MAEE;WACY,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EAAE,WAAW,CAAC,EAAE,QAAQ,GAAG,MAAM;IAsB3G;;;;;MAKE;WACY,qBAAqB,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,CAAC,EAAE,OAAO,GAAG,MAAM;IAqBjG;;;;;MAKE;WACY,8BAA8B,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,KAAK,EAAE,4BAA4B,GAAG,wBAAwB;IAgE/I,gHAAgH;WAClG,gCAAgC,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,OAAO,GAAG,QAAQ;IAU7G,6GAA6G;WAC/F,kCAAkC,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,OAAO,GAAG,QAAQ;IAW/G;;;;OAIG;WACW,2BAA2B,CAAC,MAAM,EAAE,QAAQ,GAAG,UAAU,GAAG,SAAS;IAMnF;;;;;;OAMG;WACW,6BAA6B,CAAC,MAAM,EAAE,QAAQ,GAAG,UAAU,GAAG,SAAS;IAOrF;;;;;;;;;;;;OAYG;WACW,4BAA4B,CAAC,MAAM,EAAE,QAAQ,EAAE,gBAAgB,GAAE,OAAe,GAAG,OAAO;IAIxG;;;;;;;;;;;;MAYE;WACY,oBAAoB,CAAC,MAAM,EAAE,QAAQ,EAAE,gBAAgB,GAAE,OAAe,GAAG,MAAM;IAmD/F;;OAEG;WACW,6BAA6B,CAAC,MAAM,EAAE,QAAQ,GAAG,OAAO;IAGtE;;;;;MAKE;WACY,kBAAkB,CAAC,MAAM,EAAE,QAAQ,EAAE,qBAAqB,GAAE,OAAe,GAAG,OAAO;IAcnG;;;;;;;;OAQG;WACW,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EACxE,eAAe,GAAE,OAAc,EAAE,eAAe,GAAE,OAAc,EAAE,WAAW,GAAE,OAAc,GAAG,eAAe,GAAG,SAAS;IAU7H;;;;;;;;IAQA;WACc,qBAAqB,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EAChF,YAAY,EAAE,CAAC,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,UAAU,EAAE,MAAM,KAAK,IAAI,EAC5G,eAAe,GAAE,OAAc,EAAE,eAAe,GAAE,OAAc,EAAE,WAAW,GAAE,OAAc,GAAG,IAAI;IAuCtG;;;OAGG;WACW,yCAAyC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,EAC5G,QAAQ,EAAE,kBAAkB,GAAG,GAAG;IAUpC,yFAAyF;mBACpE,iDAAiD;IAStE,OAAO,CAAC,MAAM,CAAC,eAAe,CAAS;IACvC;;;OAGG;WACW,iBAAiB,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM;IACtD;;OAEG;IACH,WAAkB,cAAc,IAAI,MAAM,CAAiC;IAC3E;;OAEG;IACH,OAAc,eAAe,SAAK;IAElC;;;;;;OAMG;WACiB,8CAA8C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,EACvH,QAAQ,EAAE,kBAAkB,GAAG,OAAO,CAAC,MAAM,CAAC;IAiBhD;;OAEG;WACW,+CAA+C,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,MAAM,EAAE,EAAE;IA6B/G;;;;;;;OAOG;WACW,uCAAuC,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,WAAW,EAAE,QAAQ,EAAE,kBAAkB,EAAE,KAAK,GAAG,MAAM,EAAE,EAAE;IA6BzJ;;;;;;;;;OASG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,gBAAgB,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,EAAE,WAAW,EAAE,QAAQ,EAAE,kBAAkB,GAAE,KAAmC,GAAG,eAAe,GAAG,SAAS;IAO1M;;;;;OAKG;WACW,oCAAoC,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EACjF,YAAY,EAAE,CAAC,MAAM,EAAE,YAAY,KAAK,IAAI;IAQ9C;;;;;;OAMG;WACW,4BAA4B,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,GAAG,eAAe,GAAG,SAAS;IAqDzG;;;;;;;;;;;;;;OAcG;WACW,eAAe,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EAAE,OAAO,EAAE,eAAe,EAAE,cAAc,CAAC,EAAE,YAAY,EAAE,GAAG,eAAe,GAAG,SAAS;IAuCvJ;;KAEC;WACa,eAAe,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,EAAE,GAAG,QAAQ,EAAE;IAuBvG;OACG;WACW,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,CAAC,OAAO,EAAE,eAAe,KAAK,OAAO,GAAG,QAAQ;IAkBxH;;OAEG;WACW,uBAAuB,CAAC,OAAO,EAAE,eAAe,GAAG,MAAM;IAavE;;OAEG;WACW,uBAAuB,CAAC,OAAO,EAAE,eAAe,GAAG,MAAM;IAUvE;;;;OAIG;IACH,OAAO,CAAC,MAAM,CAAC,2CAA2C;IA8B1D;;;;OAIG;WACW,6CAA6C,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,kBAAkB,GAAE,OAAe,GAAG,MAAM,EAAE,EAAE;IAuBlJ;;;OAGG;WACW,0CAA0C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,QAAQ;IAa1H;;OAEG;WACW,oCAAoC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,aAAa,EAAE;IAU3H;;OAEG;WACW,qCAAqC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,YAAY,EAAE;IAW3H;;;;;OAKG;WACiB,0CAA0C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,OAAO,CAAC,YAAY,EAAE,CAAC;IAa/I;;;OAGG;WACW,sBAAsB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,eAAe;IAW3F;;OAEG;WACW,qBAAqB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe;IAkDxE;;;;;;;;;OASG;IACH,OAAO,CAAC,MAAM,CAAC,iCAAiC;IAUhD;;;;OAIG;WACW,4BAA4B,CAAC,QAAQ,EAAE,QAAQ,EAAE,iBAAiB,GAAE,OAAe,GAAG,MAAM,EAAE,EAAE;IAS9G;;;;OAIG;WACW,6BAA6B,CAAC,QAAQ,EAAE,QAAQ,EAAE,eAAe,EAAE,CAAC,mBAAmB,EAAE,MAAM,EAAE,KAAK,IAAI;IAyCxH;;;OAGG;WACW,uBAAuB,CAAC,MAAM,EAAE,QAAQ,EAAE,iBAAiB,EAAE,OAAO,EAAE,eAAe,EAAE,6BAA6B,GAAG,QAAQ;IAwB7I;;OAEG;WACW,0BAA0B,CAAC,QAAQ,EAAE,QAAQ,GAAG,QAAQ;IA4CtE;;;;;OAKG;IACH,OAAO,CAAC,MAAM,CAAC,iBAAiB;IAUhC;;;;;;OAMG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,WAAW,EAAE,MAAM,EAAE,KAAK,EAAE,OAAO;IAQxH;;;;;OAKG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,WAAW,EAAE,MAAM,GAAG,OAAO,GAAG,SAAS;IAS9H;;MAEE;WACY,kBAAkB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,kBAAkB;IAa1F;;;;;;;OAOG;WACW,2BAA2B,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EAAE,kBAAkB,CAAC,EAAE,KAAK,EAAE,UAAU,GAAE,OAAe,GAAG,mBAAmB,EAAE;IAgC3J;;;;;;;;MAQE;WACY,wBAAwB,CAAC,IAAI,EAAE,eAAe,EAAE,cAAc,CAAC,EAAE,KAAK;IA4BpF;;OAEG;WACW,sBAAsB,CAAC,OAAO,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,QAAQ,GAAG,QAAQ,GAAG,SAAS;IAS3H;;;;MAIE;WAEY,qBAAqB,CAAC,IAAI,EAAE,eAAe,EAAE,KAAK,EAAE,OAAO;IAKzE;;;;OAIG;WACW,sBAAsB,CAAC,IAAI,EAAE,eAAe;IAkB1D;;;;OAIG;WACW,uDAAuD,CAAC,IAAI,EAAE,eAAe,GAAG,OAAO;IAIrG;;;OAGG;WACW,mBAAmB,CAAC,QAAQ,EAAE,eAAe;IAI3D;;;;;;;;;MASE;WACY,mBAAmB,CAAC,QAAQ,EAAE,eAAe,EAAE,cAAc,GAAE,KAAiC;IAI9G;;;;;;OAMG;WACW,WAAW,CAAC,MAAM,EAAE,eAAe,EAC/C,oBAAoB,EAAE,MAAM,EAC5B,aAAa,GAAE,iBAA8C,GAAG,eAAe;IAOjF,OAAO,CAAC,MAAM,CAAC,aAAa,CAAC,CAAsB;IACnD,OAAO,CAAC,MAAM,CAAC,cAAc,CAAC,CAAyB;IACvD,OAAO,CAAC,MAAM,CAAC,eAAe,CAAC,CAAwB;IACvD,OAAO,CAAC,MAAM,CAAC,iBAAiB,CAAC,CAAgC;IACjE,OAAO,CAAC,MAAM,CAAC,iBAAiB,CAAC,CAA4B;IAC7D,OAAO,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAA+B;IAEjE;;;;;;;;;;;MAWE;WACY,cAAc,CAAC,OAAO,EAAE,QAAQ,GAAG,eAAe,EAAE,GAAG,EAAE,KAAK,EAAE,OAAO,CAAC,EAAE,qBAAqB,GAAG,mBAAmB,GAAG,SAAS;CAoChJ;AAED;;;;;;;;;GASG;AACH,MAAM,MAAM,kBAAkB,GAAG,CAAC,UAAU,EAAE,gBAAgB,EAAE,YAAY,EAAE,MAAM,EAClF,QAAQ,EAAE,QAAQ,EAAE,UAAU,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,EAAE,aAAa,EAAE,MAAM,EAAE,aAAa,EAAE,MAAM,KAAK,GAAG,CAAC"}
+{"version":3,"file":"PolyfaceQuery.d.ts","sourceRoot":"","sources":["../../../src/polyface/PolyfaceQuery.ts"],"names":[],"mappings":"AAKA;;GAEG;AAIH,OAAO,EAAE,WAAW,EAAE,eAAe,EAAE,MAAM,0BAA0B,CAAC;AAGxE,OAAO,EAAE,oBAAoB,EAAE,MAAM,yBAAyB,CAAC;AAE/D,OAAO,EAAE,aAAa,EAAE,MAAM,wBAAwB,CAAC;AACvD,OAAO,EAAE,YAAY,EAAE,MAAM,uBAAuB,CAAC;AACrD,OAAO,EAAE,IAAI,EAAE,MAAM,eAAe,CAAC;AAGrC,OAAO,EAAE,KAAK,EAAE,MAAM,qBAAqB,CAAC;AAG5C,OAAO,EAAE,gBAAgB,EAAE,MAAM,gCAAgC,CAAC;AAElE,OAAO,EAAE,4BAA4B,EAAE,MAAM,4CAA4C,CAAC;AAE1F,OAAO,EAAE,OAAO,EAAE,QAAQ,EAAE,MAAM,+BAA+B,CAAC;AAIlE,OAAO,EAAE,KAAK,EAAE,MAAM,qBAAqB,CAAC;AAC5C,OAAO,EAAE,QAAQ,EAAE,MAAM,wBAAwB,CAAC;AAClD,OAAO,EAAE,UAAU,EAAE,MAAM,0BAA0B,CAAC;AAGtD,OAAO,EAAY,aAAa,EAAgB,MAAM,mBAAmB,CAAC;AAK1E,OAAO,EACsB,qBAAqB,EAAE,mBAAmB,EACtE,MAAM,uBAAuB,CAAC;AAE/B,OAAO,EAAE,kBAAkB,EAAgB,mBAAmB,EAAE,MAAM,sBAAsB,CAAC;AAI7F,OAAO,EAAE,sBAAsB,EAAE,MAAM,oCAAoC,CAAC;AAG5E,OAAO,EAAE,eAAe,EAAE,QAAQ,EAAE,eAAe,EAAE,MAAM,YAAY,CAAC;AAExE,OAAO,EAAE,eAAe,EAAE,MAAM,mBAAmB,CAAC;AAEpD;;;;GAIG;AACH,qBAAa,8BAA8B;IACzC;;;;OAIG;IACI,WAAW,EAAE,QAAQ,CAAC;IAC7B,kEAAkE;IAC3D,sBAAsB,EAAE,OAAO,CAAC;IACvC,gHAAgH;IACzG,mBAAmB,EAAE,OAAO,CAAC;IACpC,yDAAyD;IAClD,mBAAmB,EAAE,OAAO,CAAC;IACpC,+IAA+I;IACxI,SAAS,EAAE,KAAK,CAAC;IACxB,2CAA2C;IACpC,cAAc,EAAE,OAAO,CAAC;IAE/B;MACE;IACF,OAAO;IASP;;;;;OAKG;WACW,MAAM,CAAC,WAAW,CAAC,EAAE,QAAQ,EAAE,SAAS,CAAC,EAAE,KAAK,EAAE,cAAc,CAAC,EAAE,OAAO,EACtF,sBAAsB,CAAC,EAAE,OAAO,EAChC,mBAAmB,CAAC,EAAE,OAAO,EAC7B,mBAAmB,CAAC,EAAE,OAAO;IAU/B,+CAA+C;IAC/C,IAAW,UAAU,YAA6H;IAElJ;;;MAGE;IACK,0BAA0B,CAAC,WAAW,EAAE,QAAQ,GAAG,SAAS,GAAG,OAAO;CAQ9E;AAED;;;GAGG;AACH,MAAM,WAAW,eAAe;IAC9B,8EAA8E;IAC9E,YAAY,CAAC,EAAE,MAAM,CAAC;IACtB,yEAAyE;IACzE,kBAAkB,CAAC,EAAE,MAAM,CAAC;IAC5B;;OAEG;IACH,QAAQ,CAAC,EAAE,QAAQ,CAAC;IACpB,gGAAgG;IAChG,mBAAmB,CAAC,EAAE,OAAO,CAAC;CAC/B;AACD;;;;EAIE;AACF,MAAM,WAAW,gCAAgC;IAC/C,oCAAoC,CAAC,EAAE,OAAO,CAAC;IAC/C,sBAAsB,CAAC,EAAE,OAAO,CAAC;IACjC,sBAAsB,CAAC,EAAE,OAAO,CAAC;IACjC,yBAAyB,CAAC,EAAE,OAAO,CAAC;CACrC;AACD;;;;;GAKG;AACH,qBAAa,iBAAiB;IAC5B,wDAAwD;IACjD,+BAA+B,EAAE,KAAK,CAAC;IAC9C,wEAAwE;IACjE,oCAAoC,EAAE,KAAK,CAAC;IACnD,wFAAwF;IACjF,0BAA0B,EAAE,KAAK,CAAC;IACzC;;OAEG;IACI,cAAc,CAAC,EAAE,gCAAgC,CAAC;IAEzD,4CAA4C;IAC5C,OAAO;IAQP;;;;;;OAMG;WACW,MAAM,CAClB,+BAA+B,GAAE,KAA+B,EAChE,oCAAoC,GAAE,KAA+B,EACrE,8BAA8B,GAAE,KAAgC;CAanE;AAED;;;GAGG;AACH,MAAM,WAAW,wBAAwB;IACvC,6BAA6B;IAC7B,MAAM,EAAE,MAAM,CAAC;IACf,qDAAqD;IACrD,iCAAiC,CAAC,EAAE,UAAU,CAAC;IAC/C,qDAAqD;IACrD,iCAAiC,CAAC,EAAE,UAAU,CAAC;CAChD;AACD;;;GAGG;AACH,oBAAY,6BAA6B;IACvC,oCAAoC;IACpC,UAAU,IAAI;IACd,6CAA6C;IAC7C,SAAS,IAAI;IACb,0CAA0C;IAC1C,SAAS,IAAI;IACb,8DAA8D;IAC9D,iBAAiB,IAAI;CACtB;AACD;;GAEG;AACH,qBAAa,aAAa;IACxB,0EAA0E;WAC5D,aAAa,CAAC,OAAO,EAAE,eAAe;IAIpD,+DAA+D;WACjD,sBAAsB,CAAC,QAAQ,EAAE,QAAQ,GAAG,WAAW;IASrE;;MAEE;WACY,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EAAE,WAAW,CAAC,EAAE,QAAQ,GAAG,MAAM;IAsB3G;;;;;MAKE;WACY,qBAAqB,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,CAAC,EAAE,OAAO,GAAG,MAAM;IAqBjG;;;;;MAKE;WACY,8BAA8B,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,KAAK,EAAE,4BAA4B,GAAG,wBAAwB;IAgE/I,gHAAgH;WAClG,gCAAgC,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,OAAO,GAAG,QAAQ;IAU7G,6GAA6G;WAC/F,kCAAkC,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,OAAO,GAAG,QAAQ;IAW/G;;;;OAIG;WACW,2BAA2B,CAAC,MAAM,EAAE,QAAQ,GAAG,UAAU,GAAG,SAAS;IAMnF;;;;;;OAMG;WACW,6BAA6B,CAAC,MAAM,EAAE,QAAQ,GAAG,UAAU,GAAG,SAAS;IAOrF;;;;;;;;;;;;OAYG;WACW,4BAA4B,CAAC,MAAM,EAAE,QAAQ,EAAE,gBAAgB,GAAE,OAAe,GAAG,OAAO;IAIxG;;;;;;;;;;;;MAYE;WACY,oBAAoB,CAAC,MAAM,EAAE,QAAQ,EAAE,gBAAgB,GAAE,OAAe,GAAG,MAAM;IAmD/F;;OAEG;WACW,6BAA6B,CAAC,MAAM,EAAE,QAAQ,GAAG,OAAO;IAGtE;;;;;MAKE;WACY,kBAAkB,CAAC,MAAM,EAAE,QAAQ,EAAE,qBAAqB,GAAE,OAAe,GAAG,OAAO;IAcnG;;;;;;;;OAQG;WACW,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EACxE,eAAe,GAAE,OAAc,EAAE,eAAe,GAAE,OAAc,EAAE,WAAW,GAAE,OAAc,GAAG,eAAe,GAAG,SAAS;IAU7H;;;;;;;;IAQA;WACc,qBAAqB,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,GAAG,SAAS,EAChF,YAAY,EAAE,CAAC,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,OAAO,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,MAAM,EAAE,UAAU,EAAE,MAAM,KAAK,IAAI,EAC5G,eAAe,GAAE,OAAc,EAAE,eAAe,GAAE,OAAc,EAAE,WAAW,GAAE,OAAc,GAAG,IAAI;IAuCtG;;;OAGG;WACW,yCAAyC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,EAC5G,QAAQ,EAAE,kBAAkB,GAAG,GAAG;IAUpC,yFAAyF;mBACpE,iDAAiD;IAStE,OAAO,CAAC,MAAM,CAAC,eAAe,CAAS;IACvC;;;OAGG;WACW,iBAAiB,CAAC,KAAK,EAAE,MAAM,GAAG,MAAM;IACtD;;OAEG;IACH,WAAkB,cAAc,IAAI,MAAM,CAAiC;IAC3E;;OAEG;IACH,OAAc,eAAe,SAAK;IAElC;;;;;;OAMG;WACiB,8CAA8C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,EACvH,QAAQ,EAAE,kBAAkB,GAAG,OAAO,CAAC,MAAM,CAAC;IAiBhD;;OAEG;WACW,+CAA+C,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,MAAM,EAAE,EAAE;IA6B/G;;;;;;;OAOG;WACW,uCAAuC,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,WAAW,EAAE,QAAQ,EAAE,kBAAkB,EAAE,KAAK,GAAG,MAAM,EAAE,EAAE;IA6BzJ;;;;;;;;;OASG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,gBAAgB,EAAE,CAAC,GAAG,CAAC,GAAG,CAAC,EAAE,WAAW,EAAE,QAAQ,EAAE,kBAAkB,GAAE,KAAmC,GAAG,eAAe,GAAG,SAAS;IAO1M;;;;;OAKG;WACW,oCAAoC,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EACjF,YAAY,EAAE,CAAC,MAAM,EAAE,YAAY,KAAK,IAAI;IAQ9C;;;;;;OAMG;WACW,4BAA4B,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,GAAG,eAAe,GAAG,SAAS;IAqDzG;;;;;;;;;;;;;;OAcG;WACW,eAAe,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EAAE,OAAO,EAAE,eAAe,EAAE,cAAc,CAAC,EAAE,YAAY,EAAE,GAAG,eAAe,GAAG,SAAS;IAuCvJ;;KAEC;WACa,eAAe,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,EAAE,GAAG,QAAQ,EAAE;IAuBvG;OACG;WACW,aAAa,CAAC,MAAM,EAAE,QAAQ,GAAG,eAAe,EAAE,MAAM,EAAE,CAAC,OAAO,EAAE,eAAe,KAAK,OAAO,GAAG,QAAQ;IAkBxH;;OAEG;WACW,uBAAuB,CAAC,OAAO,EAAE,eAAe,GAAG,MAAM;IAavE;;OAEG;WACW,uBAAuB,CAAC,OAAO,EAAE,eAAe,GAAG,MAAM;IAUvE;;;;OAIG;IACH,OAAO,CAAC,MAAM,CAAC,2CAA2C;IA8B1D;;;;OAIG;WACW,6CAA6C,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,EAAE,kBAAkB,GAAE,OAAe,GAAG,MAAM,EAAE,EAAE;IAuBlJ;;;OAGG;WACW,0CAA0C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,QAAQ;IAa1H,kFAAkF;WACpE,0CAA0C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,QAAQ;IAI1H;;;;;;OAMG;WACW,uBAAuB,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,iBAAiB,EAAE,QAAQ,GAAG,eAAe,EAAE,OAAO,CAAC,EAAE,8BAA8B,GAAG,oBAAoB,EAAE;IAsC1L;;;;;;;;;;;;;;;OAeG;WACW,yBAAyB,CACrC,gBAAgB,EAAE,gBAAgB,GAAG,OAAO,EAAE,EAC9C,iBAAiB,EAAE,QAAQ,GAAG,eAAe,EAC7C,iBAAiB,EAAE,sBAAsB,CAAC,MAAM,CAAC,GAAG,YAAY,EAAE;IAkCpE;;;;;QAKI;WACU,oCAAoC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,aAAa,EAAE;IAO3H;;;;;OAKG;WACW,qCAAqC,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,YAAY,EAAE;IAO3H;;;;;;OAMG;WACiB,0CAA0C,CAAC,gBAAgB,EAAE,gBAAgB,EAAE,QAAQ,EAAE,QAAQ,GAAG,OAAO,CAAC,YAAY,EAAE,CAAC;IAa/I;;;OAGG;WACW,sBAAsB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,eAAe;IAW3F;;OAEG;WACW,qBAAqB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe;IAkDxE;;;;;;;;;OASG;IACH,OAAO,CAAC,MAAM,CAAC,iCAAiC;IAUhD;;;;OAIG;WACW,4BAA4B,CAAC,QAAQ,EAAE,QAAQ,EAAE,iBAAiB,GAAE,OAAe,GAAG,MAAM,EAAE,EAAE;IAS9G;;;;OAIG;WACW,6BAA6B,CAAC,QAAQ,EAAE,QAAQ,EAAE,eAAe,EAAE,CAAC,mBAAmB,EAAE,MAAM,EAAE,KAAK,IAAI;IAyCxH;;;OAGG;WACW,uBAAuB,CAAC,MAAM,EAAE,QAAQ,EAAE,iBAAiB,EAAE,OAAO,EAAE,eAAe,EAAE,6BAA6B,GAAG,QAAQ;IAwB7I;;OAEG;WACW,0BAA0B,CAAC,QAAQ,EAAE,QAAQ,GAAG,QAAQ;IA4CtE;;;;;OAKG;IACH,OAAO,CAAC,MAAM,CAAC,iBAAiB;IAUhC;;;;;;OAMG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,WAAW,EAAE,MAAM,EAAE,KAAK,EAAE,OAAO;IAQxH;;;;;OAKG;WACW,uBAAuB,CAAC,QAAQ,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,WAAW,EAAE,MAAM,GAAG,OAAO,GAAG,SAAS;IAS9H;;MAEE;WACY,kBAAkB,CAAC,QAAQ,EAAE,QAAQ,GAAG,eAAe,GAAG,kBAAkB;IAa1F;;;;;;;OAOG;WACW,2BAA2B,CAAC,IAAI,EAAE,QAAQ,GAAG,eAAe,EAAE,kBAAkB,CAAC,EAAE,KAAK,EAAE,UAAU,GAAE,OAAe,GAAG,mBAAmB,EAAE;IAgC3J;;;;;;;;MAQE;WACY,wBAAwB,CAAC,IAAI,EAAE,eAAe,EAAE,cAAc,CAAC,EAAE,KAAK;IA4BpF;;OAEG;WACW,sBAAsB,CAAC,OAAO,EAAE,eAAe,EAAE,UAAU,EAAE,MAAM,EAAE,MAAM,CAAC,EAAE,QAAQ,GAAG,QAAQ,GAAG,SAAS;IAS3H;;;;MAIE;WAEY,qBAAqB,CAAC,IAAI,EAAE,eAAe,EAAE,KAAK,EAAE,OAAO;IAKzE;;;;OAIG;WACW,sBAAsB,CAAC,IAAI,EAAE,eAAe;IAkB1D;;;;OAIG;WACW,uDAAuD,CAAC,IAAI,EAAE,eAAe,GAAG,OAAO;IAIrG;;;OAGG;WACW,mBAAmB,CAAC,QAAQ,EAAE,eAAe;IAI3D;;;;;;;;;MASE;WACY,mBAAmB,CAAC,QAAQ,EAAE,eAAe,EAAE,cAAc,GAAE,KAAiC;IAI9G;;;;;;OAMG;WACW,WAAW,CAAC,MAAM,EAAE,eAAe,EAC/C,oBAAoB,EAAE,MAAM,EAC5B,aAAa,GAAE,iBAA8C,GAAG,eAAe;IAOjF,OAAO,CAAC,MAAM,CAAC,aAAa,CAAC,CAAsB;IACnD,OAAO,CAAC,MAAM,CAAC,cAAc,CAAC,CAAyB;IACvD,OAAO,CAAC,MAAM,CAAC,eAAe,CAAC,CAAwB;IACvD,OAAO,CAAC,MAAM,CAAC,iBAAiB,CAAC,CAAgC;IACjE,OAAO,CAAC,MAAM,CAAC,iBAAiB,CAAC,CAA4B;IAC7D,OAAO,CAAC,MAAM,CAAC,kBAAkB,CAAC,CAA+B;IAEjE;;;;;;;;;;;MAWE;WACY,cAAc,CAAC,OAAO,EAAE,QAAQ,GAAG,eAAe,EAAE,GAAG,EAAE,KAAK,EAAE,OAAO,CAAC,EAAE,qBAAqB,GAAG,mBAAmB,GAAG,SAAS;CAoChJ;AAED;;;;;;;;;GASG;AACH,MAAM,MAAM,kBAAkB,GAAG,CAAC,UAAU,EAAE,gBAAgB,EAAE,YAAY,EAAE,MAAM,EAClF,QAAQ,EAAE,QAAQ,EAAE,UAAU,EAAE,MAAM,EAAE,MAAM,EAAE,OAAO,EAAE,EAAE,aAAa,EAAE,MAAM,EAAE,aAAa,EAAE,MAAM,KAAK,GAAG,CAAC"}

package/lib/cjs/polyface/PolyfaceQuery.js

@@ -4,13 +4,13 @@
 * See LICENSE.md in the project root for license terms and full copyright notice.
 *--------------------------------------------------------------------------------------------*/
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.PolyfaceQuery = exports.DuplicateFacetClusterSelector = exports.OffsetMeshOptions = void 0;
+exports.PolyfaceQuery = exports.DuplicateFacetClusterSelector = exports.OffsetMeshOptions = exports.SweepLineStringToFacetsOptions = void 0;
 /** @packageDocumentation
  * @module Polyface
  */
 /* eslint-disable @typescript-eslint/naming-convention, no-empty */
-const PointHelpers_1 = require("../geometry3d/PointHelpers");
 const CurveCollection_1 = require("../curve/CurveCollection");
+const CurveOps_1 = require("../curve/CurveOps");
 const MultiChainCollector_1 = require("../curve/internalContexts/MultiChainCollector");
 const LineSegment3d_1 = require("../curve/LineSegment3d");
 const LineString3d_1 = require("../curve/LineString3d");
@@ -18,8 +18,11 @@ const Loop_1 = require("../curve/Loop");
 const StrokeOptions_1 = require("../curve/StrokeOptions");
 const Geometry_1 = require("../Geometry");
 const Angle_1 = require("../geometry3d/Angle");
+const BarycentricTriangle_1 = require("../geometry3d/BarycentricTriangle");
 const FrameBuilder_1 = require("../geometry3d/FrameBuilder");
+const Point3dArrayCarrier_1 = require("../geometry3d/Point3dArrayCarrier");
 const Point3dVector3d_1 = require("../geometry3d/Point3dVector3d");
+const PointHelpers_1 = require("../geometry3d/PointHelpers");
 const PolygonOps_1 = require("../geometry3d/PolygonOps");
 const Range_1 = require("../geometry3d/Range");
 const Matrix4d_1 = require("../geometry4d/Matrix4d");
@@ -27,22 +30,62 @@ const MomentData_1 = require("../geometry4d/MomentData");
 const UnionFind_1 = require("../numerics/UnionFind");
 const ChainMerge_1 = require("../topology/ChainMerge");
 const Graph_1 = require("../topology/Graph");
+const HalfEdgeGraphFromIndexedLoopsContext_1 = require("../topology/HalfEdgeGraphFromIndexedLoopsContext");
 const HalfEdgeGraphSearch_1 = require("../topology/HalfEdgeGraphSearch");
 const Merging_1 = require("../topology/Merging");
+const SpaceTriangulation_1 = require("../topology/SpaceTriangulation");
+const FacetLocationDetail_1 = require("./FacetLocationDetail");
 const FacetOrientation_1 = require("./FacetOrientation");
 const IndexedEdgeMatcher_1 = require("./IndexedEdgeMatcher");
 const IndexedPolyfaceVisitor_1 = require("./IndexedPolyfaceVisitor");
 const BuildAverageNormalsContext_1 = require("./multiclip/BuildAverageNormalsContext");
+const OffsetMeshContext_1 = require("./multiclip/OffsetMeshContext");
 const SweepLineStringToFacetContext_1 = require("./multiclip/SweepLineStringToFacetContext");
 const XYPointBuckets_1 = require("./multiclip/XYPointBuckets");
 const Polyface_1 = require("./Polyface");
 const PolyfaceBuilder_1 = require("./PolyfaceBuilder");
 const RangeLengthData_1 = require("./RangeLengthData");
-const SpaceTriangulation_1 = require("../topology/SpaceTriangulation");
-const HalfEdgeGraphFromIndexedLoopsContext_1 = require("../topology/HalfEdgeGraphFromIndexedLoopsContext");
-const OffsetMeshContext_1 = require("./multiclip/OffsetMeshContext");
-const FacetLocationDetail_1 = require("./FacetLocationDetail");
-const BarycentricTriangle_1 = require("../geometry3d/BarycentricTriangle");
+/**
+ * Options carrier for sweeping linework onto meshes.
+ * * The create method initializes all options.
+ * @public
+ */
+class SweepLineStringToFacetsOptions {
+    /** constructor -- captures fully-checked parameters from static create method.
+    */
+    constructor(vectorToEye, sideAngle, assembleChains, collectOnForwardFacets, collectOnSideFacets, collectOnRearFacets) {
+        this.vectorToEye = vectorToEye;
+        this.sideAngle = sideAngle;
+        this.assembleChains = assembleChains;
+        this.collectOnForwardFacets = collectOnForwardFacets;
+        this.collectOnSideFacets = collectOnSideFacets;
+        this.collectOnRearFacets = collectOnRearFacets;
+    }
+    /** Create an options structure.
+     * * Default vectorToEye is positive Z
+     * * Default sideAngle has radians value Geometry.smallAngleRadians
+     * * Default assembleChains is true
+     * * Default collectOnForwardFacets, collectOnSideFacets, collectOnRearFacets are all true.
+     */
+    static create(vectorToEye, sideAngle, assembleChains, collectOnForwardFacets, collectOnSideFacets, collectOnRearFacets) {
+        return new SweepLineStringToFacetsOptions(vectorToEye === undefined ? Point3dVector3d_1.Vector3d.unitZ() : vectorToEye.clone(), sideAngle === undefined ? Angle_1.Angle.createRadians(Geometry_1.Geometry.smallAngleRadians) : sideAngle.clone(), Geometry_1.Geometry.resolveValue(assembleChains, true), Geometry_1.Geometry.resolveValue(collectOnForwardFacets, true), Geometry_1.Geometry.resolveValue(collectOnSideFacets, true), Geometry_1.Geometry.resolveValue(collectOnRearFacets, true));
+    }
+    /** Return true if all outputs are requested */
+    get collectAll() { return this.collectOnForwardFacets === true && this.collectOnRearFacets === true && this.collectOnRearFacets === true; }
+    /** Decide if the instance flags accept this facet.
+     * * Facets whose facet normal have positive, zero, or negative dot product with the vectorToEye are forward, side, and rear.
+     * * Undefined facet normal returns false
+    */
+    collectFromThisFacetNormal(facetNormal) {
+        if (facetNormal === undefined)
+            return false;
+        const theta = facetNormal.angleFromPerpendicular(this.vectorToEye);
+        if (theta.isMagnitudeLessThanOrEqual(this.sideAngle))
+            return this.collectOnSideFacets;
+        return facetNormal.dotProduct(this.vectorToEye) > 0 ? this.collectOnForwardFacets : this.collectOnRearFacets;
+    }
+}
+exports.SweepLineStringToFacetsOptions = SweepLineStringToFacetsOptions;
 /**
  * Options carrier for [[PolyfaceQuery.cloneOffset]].
  * * Default options are strongly recommended.
@@ -450,7 +493,7 @@ class PolyfaceQuery {
     }
     /** Find segments (within the linestring) which project to facets.
      * * Announce each pair of linestring segment and on-facet segment through a callback.
-     * * Facets are ASSUMED to be convex and planar.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
     static announceSweepLinestringToConvexPolyfaceXY(linestringPoints, polyface, announce) {
         const context = SweepLineStringToFacetContext_1.SweepLineStringToFacetContext.create(linestringPoints);
@@ -480,7 +523,7 @@ class PolyfaceQuery {
     static get asyncWorkLimit() { return this._asyncWorkLimit; }
     /** Find segments (within the linestring) which project to facets.
      * * Announce each pair of linestring segment and on-facet segment through a callback.
-     * * Facets are ASSUMED to be convex and planar.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      * * REMARK: Although this is public, the usual use is via slightly higher level public methods, viz:
      *   * asyncSweepLinestringToFacetsXYReturnChains
      * @internal
@@ -635,7 +678,7 @@ class PolyfaceQuery {
                 edges.push(LineSegment3d_1.LineSegment3d.create(pointA, pointB));
                 edgeStrings.push([pointA.clone(), pointB.clone()]);
             });
-            const chains = MultiChainCollector_1.OffsetHelpers.collectChains(edges, gapTolerance, planarityTolerance);
+            const chains = CurveOps_1.CurveOps.collectChains(edges, gapTolerance, planarityTolerance);
             if (chains) {
                 const frameBuilder = new FrameBuilder_1.FrameBuilder();
                 frameBuilder.announce(chains);
@@ -659,14 +702,14 @@ class PolyfaceQuery {
     }
     /**
      * Return a mesh with "some" holes filled in with new facets.
-     *  * The candidates to be filled are all loops returned by boundaryChainsAsLineString3d
-     *  * unclosed chains are rejected.
-     *  * optionally also copy the original mesh, so the composite is a clone with holes filled.
+     *  * Candidate chains are computed by [[announceBoundaryChainsAsLineString3d]].
+     *  * Unclosed chains are rejected.
+     *  * Closed chains are triangulated and returned as a mesh.
      *  * The options structure enforces restrictions on how complicated the hole filling can be:
      *     * maxEdgesAroundHole -- holes with more edges are skipped
      *     * maxPerimeter -- holes with larger summed edge lengths are skipped.
      *     * upVector -- holes that do not have positive area along this view are skipped.
-     *     * includeOriginalMesh -- includes the original mesh in the output mesh.
+     *     * includeOriginalMesh -- includes the original mesh in the output mesh, so the composite mesh is a clone with holes filled
      * @param mesh existing mesh
      * @param options options controlling the hole fill.
      * @param unfilledChains optional array to receive the points around holes that were not filled.
@@ -842,13 +885,13 @@ class PolyfaceQuery {
         matcher.sortAndCollectClusters(allEdges, allEdges, allEdges, allEdges);
         return this.partitionFacetIndicesBySortableEdgeClusters(allEdges, numFacets);
     }
-    /** Find segments (within the linestring) which project to facets.
-     * * Assemble each segment pair as a facet in a new polyface
-     * * Facets are ASSUMED to be convex and planar.
+    /** Find segments (within the line string) which project to facets.
+     * * Assemble each input segment paired with its projected segment/point as a quad/triangle facet in a new polyface.
+     * * Input facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
-    static sweepLinestringToFacetsXYreturnSweptFacets(linestringPoints, polyface) {
+    static sweepLineStringToFacetsXYReturnSweptFacets(lineStringPoints, polyface) {
         const builder = PolyfaceBuilder_1.PolyfaceBuilder.create();
-        this.announceSweepLinestringToConvexPolyfaceXY(linestringPoints, polyface, (_linestring, _segmentIndex, _polyface, _facetIndex, points) => {
+        this.announceSweepLinestringToConvexPolyfaceXY(lineStringPoints, polyface, (_linestring, _segmentIndex, _polyface, _facetIndex, points) => {
             if (points.length === 4)
                 builder.addQuadFacet(points);
             else if (points.length === 3)
@@ -856,32 +899,128 @@ class PolyfaceQuery {
         });
         return builder.claimPolyface(true);
     }
-    /** Find segments (within the linestring) which project to facets.
-     * * Return collected line segments
+    /** @deprecated in 4.x. Use sweepLineStringToFacetsXYReturnSweptFacets instead. */
+    static sweepLinestringToFacetsXYreturnSweptFacets(linestringPoints, polyface) {
+        return this.sweepLineStringToFacetsXYReturnSweptFacets(linestringPoints, polyface);
+    }
+    /**
+     * Sweep the line string to intersections with a mesh.
+     * * Return collected line segments.
+     * * If no options are given, the default sweep direction is the z-axis, and chains are assembled and returned.
+     * * See [[SweepLineStringToFacetsOptions]] for input and output options, including filtering by forward/side/rear facets.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the sweep direction.
      */
+    static sweepLineStringToFacets(linestringPoints, polyfaceOrVisitor, options) {
+        let result = [];
+        // setup default options:
+        if (options === undefined)
+            options = SweepLineStringToFacetsOptions.create(Point3dVector3d_1.Vector3d.unitZ(), Angle_1.Angle.createRadians(Geometry_1.Geometry.smallAngleRadians), // tight geometry tolerance for vertical side facets
+            true, // assemble chains
+            true, true, true); // accept all outputs
+        let chainContext;
+        if (options.assembleChains)
+            chainContext = ChainMerge_1.ChainMergeContext.create();
+        const context = SweepLineStringToFacetContext_1.ClipSweptLineStringContext.create(linestringPoints, options.vectorToEye);
+        if (context) {
+            let visitor;
+            if (polyfaceOrVisitor instanceof Polyface_1.Polyface)
+                visitor = polyfaceOrVisitor.createVisitor(0);
+            else
+                visitor = polyfaceOrVisitor;
+            const workNormal = Point3dVector3d_1.Vector3d.createZero();
+            for (visitor.reset(); visitor.moveToNextFacet();) {
+                if (options.collectFromThisFacetNormal(PolygonOps_1.PolygonOps.areaNormalGo(visitor.point, workNormal))) {
+                    context.processPolygon(visitor.point.getArray(), (pointA, pointB) => {
+                        if (chainContext !== undefined)
+                            chainContext.addSegment(pointA, pointB);
+                        else
+                            result.push(LineSegment3d_1.LineSegment3d.create(pointA, pointB));
+                    });
+                }
+            }
+            if (chainContext !== undefined) {
+                chainContext.clusterAndMergeVerticesXYZ();
+                result = chainContext.collectMaximalChains();
+            }
+        }
+        return result;
+    }
+    /**
+     * Sweep the line string in the z-direction to intersections with a mesh, using a search object for speedup.
+     * @param lineStringPoints input line string to drape on the mesh
+     * @param polyfaceOrVisitor mesh, or mesh visitor to traverse only part of a mesh
+     * @param searchByReadIndex object for searching facet 2D ranges tagged by mesh read index
+     * @example Using a 5x5 indexed search grid:
+     * ```
+     * const xyRange = Range2d.createFrom(myPolyface.range());
+     * const searcher = GriddedRaggedRange2dSetWithOverflow.create<number>(xyRange, 5, 5)!;
+     * for (const visitor = myPolyface.createVisitor(0); visitor.moveToNextFacet();) {
+     *   searcher.addRange(visitor.point.getRange(), visitor.currentReadIndex());
+     * }
+     * const drapedLineStrings = PolyfaceQuery.sweepLineStringToFacetsXY(lineString, myPolyface, searcher);
+     * ```
+     * @returns collected line strings
+     */
+    static sweepLineStringToFacetsXY(lineStringPoints, polyfaceOrVisitor, searchByReadIndex) {
+        const chainContext = ChainMerge_1.ChainMergeContext.create();
+        const sweepVector = Point3dVector3d_1.Vector3d.create(0, 0, 1);
+        const searchRange = Range_1.Range3d.create();
+        let visitor;
+        if (polyfaceOrVisitor instanceof Polyface_1.Polyface)
+            visitor = polyfaceOrVisitor.createVisitor(0);
+        else
+            visitor = polyfaceOrVisitor;
+        let lineStringSource;
+        if (Array.isArray(lineStringPoints))
+            lineStringSource = new Point3dArrayCarrier_1.Point3dArrayCarrier(lineStringPoints);
+        else
+            lineStringSource = lineStringPoints;
+        for (let i = 1; i < lineStringSource.length; i++) {
+            const point0 = lineStringSource.getPoint3dAtUncheckedPointIndex(i - 1);
+            const point1 = lineStringSource.getPoint3dAtUncheckedPointIndex(i);
+            const edgeClipper = SweepLineStringToFacetContext_1.EdgeClipData.createPointPointSweep(point0, point1, sweepVector);
+            if (edgeClipper !== undefined) {
+                Range_1.Range3d.createNull(searchRange);
+                searchRange.extendPoint(point0);
+                searchRange.extendPoint(point1);
+                searchByReadIndex.searchRange2d(searchRange, (_facetRange, readIndex) => {
+                    if (visitor.moveToReadIndex(readIndex))
+                        edgeClipper.processPolygon(visitor.point, (pointA, pointB) => chainContext.addSegment(pointA, pointB));
+                    return true;
+                });
+            }
+        }
+        chainContext.clusterAndMergeVerticesXYZ();
+        return chainContext.collectMaximalChains();
+    }
+    /** Find segments (within the linestring) which project to facets.
+      * * Return collected line segments.
+      * * This calls [[sweepLineStringToFacets]] with options created by
+      *   `const options = SweepLineStringToFacetsOptions.create(Vector3d.unitZ(), Angle.createSmallAngle(),false, true, true, true);`
+      * @deprecated in 4.x. Use [[sweepLineStringToFacets]] to get further options.
+      */
     static sweepLinestringToFacetsXYReturnLines(linestringPoints, polyface) {
-        const drapeGeometry = [];
-        this.announceSweepLinestringToConvexPolyfaceXY(linestringPoints, polyface, (_linestring, _segmentIndex, _polyface, _facetIndex, points, indexA, indexB) => {
-            drapeGeometry.push(LineSegment3d_1.LineSegment3d.create(points[indexA], points[indexB]));
-        });
-        return drapeGeometry;
+        const options = SweepLineStringToFacetsOptions.create(Point3dVector3d_1.Vector3d.unitZ(), Angle_1.Angle.createSmallAngle(), false, true, true, true);
+        const result = PolyfaceQuery.sweepLineStringToFacets(linestringPoints, polyface, options);
+        return result;
     }
     /** Find segments (within the linestring) which project to facets.
      * * Return chains.
+     * * This calls [[sweepLineStringToFacets]] with options created by
+     *   `const options = SweepLineStringToFacetsOptions.create(Vector3d.unitZ(), Angle.createSmallAngle(),true, true, true, true);`
+     * @deprecated in 4.x. Use [[sweepLineStringToFacets]] to get further options.
      */
     static sweepLinestringToFacetsXYReturnChains(linestringPoints, polyface) {
-        const chainContext = ChainMerge_1.ChainMergeContext.create();
-        this.announceSweepLinestringToConvexPolyfaceXY(linestringPoints, polyface, (_linestring, _segmentIndex, _polyface, _facetIndex, points, indexA, indexB) => {
-            chainContext.addSegment(points[indexA], points[indexB]);
-        });
-        chainContext.clusterAndMergeVerticesXYZ();
-        return chainContext.collectMaximalChains();
+        const options = SweepLineStringToFacetsOptions.create(Point3dVector3d_1.Vector3d.unitZ(), Angle_1.Angle.createSmallAngle(), true, true, true, true);
+        const result = PolyfaceQuery.sweepLineStringToFacets(linestringPoints, polyface, options);
+        return result;
     }
     /** Find segments (within the linestring) which project to facets.
      * * This is done as a sequence of "await" steps.
      * * Each "await" step deals with approximately PolyfaceQuery.asyncWorkLimit pairings of (linestring edge) with (facet edge)
-     *  * PolyfaceQuery.setAsyncWorkLimit () to change work blocks from default
+     * * PolyfaceQuery.setAsyncWorkLimit() to change work blocks from default
      * * Return chains.
+     * * Facets are ASSUMED to be convex and planar, and not overlap in the z direction.
      */
     static async asyncSweepLinestringToFacetsXYReturnChains(linestringPoints, polyface) {
         const chainContext = ChainMerge_1.ChainMergeContext.create();
@@ -1022,7 +1161,7 @@ class PolyfaceQuery {
             }
             facetIndexAndVertexIndices.push(entry);
         }
-        facetIndexAndVertexIndices.sort(this.compareFacetIndexAndVertexIndices);
+        facetIndexAndVertexIndices.sort((arrayA, arrayB) => this.compareFacetIndexAndVertexIndices(arrayA, arrayB));
         let i0, i1;
         const n = facetIndexAndVertexIndices.length;
         const clusterArray = [];