@inweb/client 25.2.2 → 25.2.5

package/src/Viewer/Draggers/OdBaseCuttingPlaneDragger.ts

@@ -1,182 +1,182 @@
-///////////////////////////////////////////////////////////////////////////////
-// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
-// All rights reserved.
-//
-// This software and its documentation and related materials are owned by
-// the Alliance. The software may only be incorporated into application
-// programs owned by members of the Alliance, subject to a signed
-// Membership Agreement and Supplemental Software License Agreement with the
-// Alliance. The structure and organization of this software are the valuable
-// trade secrets of the Alliance and its suppliers. The software is also
-// protected by copyright law and international treaty provisions. Application
-// programs incorporating this software must include the following statement
-// with their copyright notices:
-//
-//   This application incorporates Open Design Alliance software pursuant to a
-//   license agreement with Open Design Alliance.
-//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
-//   All rights reserved.
-//
-// By use of this software, its documentation or related materials, you
-// acknowledge and accept the above terms.
-///////////////////////////////////////////////////////////////////////////////
-import { Viewer } from "../Viewer";
-import { Point2d, Point3d } from "./Common/Geometry";
-import { OdBaseDragger } from "./Common/OdBaseDragger";
-
-export class OdBaseCuttingPlaneDragger extends OdBaseDragger {
-  protected m_size_x: number;
-  protected m_size_y: number;
-  protected m_size_z: number;
-  protected m_center: Point3d;
-  protected m_normal: number[];
-  protected index: number;
-  protected m_model: any;
-  protected m_entity: any;
-  protected planePreview: any;
-  protected m_last: Point3d;
-  protected m_click: Point2d;
-
-  constructor(subject: Viewer) {
-    super(subject);
-    this.press = false;
-
-    //this.getViewer().getMarkupController().clear();
-
-    const ext = this.getViewer().getActiveExtents();
-    const min = ext.min();
-    const max = ext.max();
-
-    this.m_size_x = Math.abs(max[0] - min[0]) / 2;
-    this.m_size_y = Math.abs(max[1] - min[1]) / 2;
-    this.m_size_z = Math.abs(max[2] - min[2]) / 2;
-
-    this.m_center = this.toPoint(ext.center());
-    this.m_normal = this.createNormal();
-
-    const avp = this.getViewer().activeView;
-    const plane = this.createPlane();
-    plane.set(this.toGePoint(this.m_center), this.m_normal);
-
-    avp.addCuttingPlane(plane);
-    this.index = avp.numCuttingPlanes() - 1;
-
-    const { red, green, blue } = this.subject.options.cuttingPlaneFillColor;
-    avp.setEnableCuttingPlaneFill(true, red, green, blue);
-    avp.setCuttingPlaneFillPatternEnabled(true, this.m_module.CuttingPlaneFillStyle.kHorizontalBars, 0x0, 0x0, 0x0);
-
-    this.m_model = this.getModel();
-    this.createPreview();
-
-    this.deleteAll([ext, avp, plane]);
-  }
-
-  override dispose(): void {
-    super.dispose();
-
-    if (this.m_entity) {
-      this.m_model.removeEntity(this.m_entity);
-      this.deleteAll([this.m_model, this.m_entity, this.planePreview, this.m_center]);
-      this.m_entity = null;
-      this.planePreview = null;
-      this.subject.update();
-    }
-  }
-
-  createNormal(): number[] {
-    return [0, 0, 0];
-  }
-
-  handleDelta(delta: Point3d): Point3d {
-    return delta;
-  }
-
-  getPlanePreviewCoordinate(): any[] {
-    return [];
-  }
-
-  override start(x: number, y: number): void {
-    this.press = true;
-    this.m_last = this.screenToWorld(x, y);
-    this.m_click = { x, y };
-  }
-
-  override drag(x: number, y: number): void {
-    if (this.press) {
-      const point = this.screenToWorld(x, y);
-      const delta = this.handleDelta(point.sub(this.m_last));
-
-      const oldCenter = this.m_center;
-      this.m_center = oldCenter.add(delta);
-
-      const oldLast = this.m_last;
-      this.m_last = point;
-
-      const avp = this.getViewer().activeView;
-      const plane = this.createPlane();
-      const newPlane = plane.set(this.toGePoint(this.m_center), this.m_normal);
-      const newCutting = avp.updateCuttingPlane(this.index, plane);
-
-      this.drawPreview();
-
-      this.deleteAll([avp, plane, oldCenter, delta, oldLast, newPlane, newCutting]);
-
-      const device = this.getViewer().getActiveDevice();
-      device.invalidate(device.getSize());
-    }
-  }
-
-  override end(x: number, y: number): void {
-    this.press = false;
-    if (x === this.m_click.x && y === this.m_click.y) {
-      this.m_normal = [this.m_normal[0] * -1, this.m_normal[1] * -1, this.m_normal[2] * -1];
-
-      const avp = this.getViewer().activeView;
-      const plane = this.createPlane();
-      plane.set(this.toGePoint(this.m_center), this.m_normal);
-      avp.updateCuttingPlane(this.index, plane);
-
-      this.deleteAll([avp, plane, this.m_last]);
-
-      const device = this.getViewer().getActiveDevice();
-      device.invalidate(device.getSize());
-    }
-  }
-
-  createPreview(): void {
-    this.m_entity = this.m_model.appendEntity("&CuttingPlanePreview");
-
-    const GeometryTypes = this.m_module.GeometryTypes;
-
-    const transparencyDef = new this.m_module.OdTvTransparencyDef();
-    const colorDef = new this.m_module.OdTvColorDef(112, 112, 112); //0x53, 0x72, 0xAE
-
-    transparencyDef.setValue(0.9);
-
-    const entityPtr = this.m_entity.openObject();
-    entityPtr.setColor(colorDef, GeometryTypes.kFaces.value);
-
-    colorDef.setColor(112, 112, 112); //0xcd, 0xe2, 0xff
-    entityPtr.setColor(colorDef, GeometryTypes.kEdges.value);
-
-    entityPtr.setLineWeight(5);
-
-    entityPtr.setTransparency(transparencyDef, GeometryTypes.kFaces);
-    transparencyDef.setValue(1.0);
-    entityPtr.setTransparency(transparencyDef, GeometryTypes.kEdges);
-
-    this.planePreview = entityPtr.appendPolygon(this.getPlanePreviewCoordinate());
-    const polygonPtr = this.planePreview.openAsPolygon();
-    polygonPtr.setFilled(true);
-
-    this.deleteAll([transparencyDef, colorDef, entityPtr, polygonPtr, GeometryTypes]);
-    this.subject.syncOverlay();
-  }
-
-  drawPreview(): void {
-    const polygonPtr = this.planePreview.openAsPolygon();
-    polygonPtr.setPoints(this.getPlanePreviewCoordinate());
-    this.deleteAll([polygonPtr]);
-    this.subject.syncOverlay();
-  }
-}
+///////////////////////////////////////////////////////////////////////////////
+// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
+// All rights reserved.
+//
+// This software and its documentation and related materials are owned by
+// the Alliance. The software may only be incorporated into application
+// programs owned by members of the Alliance, subject to a signed
+// Membership Agreement and Supplemental Software License Agreement with the
+// Alliance. The structure and organization of this software are the valuable
+// trade secrets of the Alliance and its suppliers. The software is also
+// protected by copyright law and international treaty provisions. Application
+// programs incorporating this software must include the following statement
+// with their copyright notices:
+//
+//   This application incorporates Open Design Alliance software pursuant to a
+//   license agreement with Open Design Alliance.
+//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
+//   All rights reserved.
+//
+// By use of this software, its documentation or related materials, you
+// acknowledge and accept the above terms.
+///////////////////////////////////////////////////////////////////////////////
+import { Viewer } from "../Viewer";
+import { Point2d, Point3d } from "./Common/Geometry";
+import { OdBaseDragger } from "./Common/OdBaseDragger";
+
+export class OdBaseCuttingPlaneDragger extends OdBaseDragger {
+  protected m_size_x: number;
+  protected m_size_y: number;
+  protected m_size_z: number;
+  protected m_center: Point3d;
+  protected m_normal: number[];
+  protected index: number;
+  protected m_model: any;
+  protected m_entity: any;
+  protected planePreview: any;
+  protected m_last: Point3d;
+  protected m_click: Point2d;
+
+  constructor(subject: Viewer) {
+    super(subject);
+    this.press = false;
+
+    //this.getViewer().getMarkupController().clear();
+
+    const ext = this.getViewer().getActiveExtents();
+    const min = ext.min();
+    const max = ext.max();
+
+    this.m_size_x = Math.abs(max[0] - min[0]) / 2;
+    this.m_size_y = Math.abs(max[1] - min[1]) / 2;
+    this.m_size_z = Math.abs(max[2] - min[2]) / 2;
+
+    this.m_center = this.toPoint(ext.center());
+    this.m_normal = this.createNormal();
+
+    const avp = this.getViewer().activeView;
+    const plane = this.createPlane();
+    plane.set(this.toGePoint(this.m_center), this.m_normal);
+
+    avp.addCuttingPlane(plane);
+    this.index = avp.numCuttingPlanes() - 1;
+
+    const { red, green, blue } = this.subject.options.cuttingPlaneFillColor;
+    avp.setEnableCuttingPlaneFill(true, red, green, blue);
+    avp.setCuttingPlaneFillPatternEnabled(true, this.m_module.CuttingPlaneFillStyle.kHorizontalBars, 0x0, 0x0, 0x0);
+
+    this.m_model = this.getModel();
+    this.createPreview();
+
+    this.deleteAll([ext, avp, plane]);
+  }
+
+  override dispose(): void {
+    super.dispose();
+
+    if (this.m_entity) {
+      this.m_model.removeEntity(this.m_entity);
+      this.deleteAll([this.m_model, this.m_entity, this.planePreview, this.m_center]);
+      this.m_entity = null;
+      this.planePreview = null;
+      this.subject.update();
+    }
+  }
+
+  createNormal(): number[] {
+    return [0, 0, 0];
+  }
+
+  handleDelta(delta: Point3d): Point3d {
+    return delta;
+  }
+
+  getPlanePreviewCoordinate(): any[] {
+    return [];
+  }
+
+  override start(x: number, y: number): void {
+    this.press = true;
+    this.m_last = this.screenToWorld(x, y);
+    this.m_click = { x, y };
+  }
+
+  override drag(x: number, y: number): void {
+    if (this.press) {
+      const point = this.screenToWorld(x, y);
+      const delta = this.handleDelta(point.sub(this.m_last));
+
+      const oldCenter = this.m_center;
+      this.m_center = oldCenter.add(delta);
+
+      const oldLast = this.m_last;
+      this.m_last = point;
+
+      const avp = this.getViewer().activeView;
+      const plane = this.createPlane();
+      const newPlane = plane.set(this.toGePoint(this.m_center), this.m_normal);
+      const newCutting = avp.updateCuttingPlane(this.index, plane);
+
+      this.drawPreview();
+
+      this.deleteAll([avp, plane, oldCenter, delta, oldLast, newPlane, newCutting]);
+
+      const device = this.getViewer().getActiveDevice();
+      device.invalidate(device.getSize());
+    }
+  }
+
+  override end(x: number, y: number): void {
+    this.press = false;
+    if (x === this.m_click.x && y === this.m_click.y) {
+      this.m_normal = [this.m_normal[0] * -1, this.m_normal[1] * -1, this.m_normal[2] * -1];
+
+      const avp = this.getViewer().activeView;
+      const plane = this.createPlane();
+      plane.set(this.toGePoint(this.m_center), this.m_normal);
+      avp.updateCuttingPlane(this.index, plane);
+
+      this.deleteAll([avp, plane, this.m_last]);
+
+      const device = this.getViewer().getActiveDevice();
+      device.invalidate(device.getSize());
+    }
+  }
+
+  createPreview(): void {
+    this.m_entity = this.m_model.appendEntity("&CuttingPlanePreview");
+
+    const GeometryTypes = this.m_module.GeometryTypes;
+
+    const transparencyDef = new this.m_module.OdTvTransparencyDef();
+    const colorDef = new this.m_module.OdTvColorDef(112, 112, 112); //0x53, 0x72, 0xAE
+
+    transparencyDef.setValue(0.9);
+
+    const entityPtr = this.m_entity.openObject();
+    entityPtr.setColor(colorDef, GeometryTypes.kFaces.value);
+
+    colorDef.setColor(112, 112, 112); //0xcd, 0xe2, 0xff
+    entityPtr.setColor(colorDef, GeometryTypes.kEdges.value);
+
+    entityPtr.setLineWeight(5);
+
+    entityPtr.setTransparency(transparencyDef, GeometryTypes.kFaces);
+    transparencyDef.setValue(1.0);
+    entityPtr.setTransparency(transparencyDef, GeometryTypes.kEdges);
+
+    this.planePreview = entityPtr.appendPolygon(this.getPlanePreviewCoordinate());
+    const polygonPtr = this.planePreview.openAsPolygon();
+    polygonPtr.setFilled(true);
+
+    this.deleteAll([transparencyDef, colorDef, entityPtr, polygonPtr, GeometryTypes]);
+    this.subject.syncOverlay();
+  }
+
+  drawPreview(): void {
+    const polygonPtr = this.planePreview.openAsPolygon();
+    polygonPtr.setPoints(this.getPlanePreviewCoordinate());
+    this.deleteAll([polygonPtr]);
+    this.subject.syncOverlay();
+  }
+}

package/src/Viewer/Draggers/OdCuttingPlaneXAxisDragger.ts

@@ -1,53 +1,53 @@
-///////////////////////////////////////////////////////////////////////////////
-// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
-// All rights reserved.
-//
-// This software and its documentation and related materials are owned by
-// the Alliance. The software may only be incorporated into application
-// programs owned by members of the Alliance, subject to a signed
-// Membership Agreement and Supplemental Software License Agreement with the
-// Alliance. The structure and organization of this software are the valuable
-// trade secrets of the Alliance and its suppliers. The software is also
-// protected by copyright law and international treaty provisions. Application
-// programs incorporating this software must include the following statement
-// with their copyright notices:
-//
-//   This application incorporates Open Design Alliance software pursuant to a
-//   license agreement with Open Design Alliance.
-//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
-//   All rights reserved.
-//
-// By use of this software, its documentation or related materials, you
-// acknowledge and accept the above terms.
-///////////////////////////////////////////////////////////////////////////////
-import { Point3d } from "./Common/Geometry";
-import { OdBaseCuttingPlaneDragger } from "./OdBaseCuttingPlaneDragger";
-
-export class OdCuttingPlaneXAxisDragger extends OdBaseCuttingPlaneDragger {
-  override createNormal(): number[] {
-    return [1, 0, 0];
-  }
-
-  override handleDelta(delta: Point3d): Point3d {
-    delta.y = 0.0;
-    delta.z = 0.0;
-    return delta;
-  }
-
-  override getPlanePreviewCoordinate(): number[] {
-    return [
-      this.m_center.x,
-      this.m_center.y - this.m_size_y,
-      this.m_center.z - this.m_size_z,
-      this.m_center.x,
-      this.m_center.y + this.m_size_y,
-      this.m_center.z - this.m_size_z,
-      this.m_center.x,
-      this.m_center.y + this.m_size_y,
-      this.m_center.z + this.m_size_z,
-      this.m_center.x,
-      this.m_center.y - this.m_size_y,
-      this.m_center.z + this.m_size_z,
-    ];
-  }
-}
+///////////////////////////////////////////////////////////////////////////////
+// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
+// All rights reserved.
+//
+// This software and its documentation and related materials are owned by
+// the Alliance. The software may only be incorporated into application
+// programs owned by members of the Alliance, subject to a signed
+// Membership Agreement and Supplemental Software License Agreement with the
+// Alliance. The structure and organization of this software are the valuable
+// trade secrets of the Alliance and its suppliers. The software is also
+// protected by copyright law and international treaty provisions. Application
+// programs incorporating this software must include the following statement
+// with their copyright notices:
+//
+//   This application incorporates Open Design Alliance software pursuant to a
+//   license agreement with Open Design Alliance.
+//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
+//   All rights reserved.
+//
+// By use of this software, its documentation or related materials, you
+// acknowledge and accept the above terms.
+///////////////////////////////////////////////////////////////////////////////
+import { Point3d } from "./Common/Geometry";
+import { OdBaseCuttingPlaneDragger } from "./OdBaseCuttingPlaneDragger";
+
+export class OdCuttingPlaneXAxisDragger extends OdBaseCuttingPlaneDragger {
+  override createNormal(): number[] {
+    return [1, 0, 0];
+  }
+
+  override handleDelta(delta: Point3d): Point3d {
+    delta.y = 0.0;
+    delta.z = 0.0;
+    return delta;
+  }
+
+  override getPlanePreviewCoordinate(): number[] {
+    return [
+      this.m_center.x,
+      this.m_center.y - this.m_size_y,
+      this.m_center.z - this.m_size_z,
+      this.m_center.x,
+      this.m_center.y + this.m_size_y,
+      this.m_center.z - this.m_size_z,
+      this.m_center.x,
+      this.m_center.y + this.m_size_y,
+      this.m_center.z + this.m_size_z,
+      this.m_center.x,
+      this.m_center.y - this.m_size_y,
+      this.m_center.z + this.m_size_z,
+    ];
+  }
+}

package/src/Viewer/Draggers/OdCuttingPlaneYAxisDragger.ts

@@ -1,53 +1,53 @@
-///////////////////////////////////////////////////////////////////////////////
-// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
-// All rights reserved.
-//
-// This software and its documentation and related materials are owned by
-// the Alliance. The software may only be incorporated into application
-// programs owned by members of the Alliance, subject to a signed
-// Membership Agreement and Supplemental Software License Agreement with the
-// Alliance. The structure and organization of this software are the valuable
-// trade secrets of the Alliance and its suppliers. The software is also
-// protected by copyright law and international treaty provisions. Application
-// programs incorporating this software must include the following statement
-// with their copyright notices:
-//
-//   This application incorporates Open Design Alliance software pursuant to a
-//   license agreement with Open Design Alliance.
-//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
-//   All rights reserved.
-//
-// By use of this software, its documentation or related materials, you
-// acknowledge and accept the above terms.
-///////////////////////////////////////////////////////////////////////////////
-import { Point3d } from "./Common/Geometry";
-import { OdBaseCuttingPlaneDragger } from "./OdBaseCuttingPlaneDragger";
-
-export class OdCuttingPlaneYAxisDragger extends OdBaseCuttingPlaneDragger {
-  override createNormal(): number[] {
-    return [0, 1, 0];
-  }
-
-  override handleDelta(delta: Point3d): Point3d {
-    delta.x = 0.0;
-    delta.z = 0.0;
-    return delta;
-  }
-
-  override getPlanePreviewCoordinate(): number[] {
-    return [
-      this.m_center.x - this.m_size_x,
-      this.m_center.y,
-      this.m_center.z - this.m_size_z,
-      this.m_center.x + this.m_size_x,
-      this.m_center.y,
-      this.m_center.z - this.m_size_z,
-      this.m_center.x + this.m_size_x,
-      this.m_center.y,
-      this.m_center.z + this.m_size_z,
-      this.m_center.x - this.m_size_x,
-      this.m_center.y,
-      this.m_center.z + this.m_size_z,
-    ];
-  }
-}
+///////////////////////////////////////////////////////////////////////////////
+// Copyright (C) 2002-2021, Open Design Alliance (the "Alliance").
+// All rights reserved.
+//
+// This software and its documentation and related materials are owned by
+// the Alliance. The software may only be incorporated into application
+// programs owned by members of the Alliance, subject to a signed
+// Membership Agreement and Supplemental Software License Agreement with the
+// Alliance. The structure and organization of this software are the valuable
+// trade secrets of the Alliance and its suppliers. The software is also
+// protected by copyright law and international treaty provisions. Application
+// programs incorporating this software must include the following statement
+// with their copyright notices:
+//
+//   This application incorporates Open Design Alliance software pursuant to a
+//   license agreement with Open Design Alliance.
+//   Open Design Alliance Copyright (C) 2002-2021 by Open Design Alliance.
+//   All rights reserved.
+//
+// By use of this software, its documentation or related materials, you
+// acknowledge and accept the above terms.
+///////////////////////////////////////////////////////////////////////////////
+import { Point3d } from "./Common/Geometry";
+import { OdBaseCuttingPlaneDragger } from "./OdBaseCuttingPlaneDragger";
+
+export class OdCuttingPlaneYAxisDragger extends OdBaseCuttingPlaneDragger {
+  override createNormal(): number[] {
+    return [0, 1, 0];
+  }
+
+  override handleDelta(delta: Point3d): Point3d {
+    delta.x = 0.0;
+    delta.z = 0.0;
+    return delta;
+  }
+
+  override getPlanePreviewCoordinate(): number[] {
+    return [
+      this.m_center.x - this.m_size_x,
+      this.m_center.y,
+      this.m_center.z - this.m_size_z,
+      this.m_center.x + this.m_size_x,
+      this.m_center.y,
+      this.m_center.z - this.m_size_z,
+      this.m_center.x + this.m_size_x,
+      this.m_center.y,
+      this.m_center.z + this.m_size_z,
+      this.m_center.x - this.m_size_x,
+      this.m_center.y,
+      this.m_center.z + this.m_size_z,
+    ];
+  }
+}