@img/sharp-libvips-dev 1.2.1 → 1.2.2-rc.2

package/include/aom/aom_decoder.h

@@ -52,7 +52,7 @@ extern "C" {
  *
  *  The available flags are specified by AOM_CODEC_CAP_* defines.
  */
-/*!brief Can support external frame buffers */
+/*!\brief Can support external frame buffers */
 #define AOM_CODEC_CAP_EXTERNAL_FRAME_BUFFER 0x200000
 
 /*! \brief Initialization-time Feature Enabling

package/include/aom/aom_encoder.h

@@ -377,6 +377,8 @@ typedef struct cfg_options {
 typedef long aom_enc_frame_flags_t;
 /*!\brief Force this frame to be a keyframe */
 #define AOM_EFLAG_FORCE_KF (1 << 0)
+/*!\brief Calculate PSNR for this frame, requires g_lag_in_frames to be 0 */
+#define AOM_EFLAG_CALCULATE_PSNR (1 << 1)
 
 /*!\brief Encoder configuration structure
  *

package/include/aom/aomcx.h

@@ -208,11 +208,11 @@ enum aome_enc_control_id {
    * encoding process, values greater than 0 will increase encoder speed at
    * the expense of quality.
    *
-   * Valid range: 0..11. 0 runs the slowest, and 11 runs the fastest;
+   * Valid range: 0..12. 0 runs the slowest, and 12 runs the fastest;
    * quality improves as speed decreases (since more compression
    * possibilities are explored).
    *
-   * NOTE: 10 and 11 are only allowed in AOM_USAGE_REALTIME. In
+   * NOTE: 10 - 12 are only allowed in AOM_USAGE_REALTIME. In
    * AOM_USAGE_GOOD_QUALITY and AOM_USAGE_ALL_INTRA, 9 is the highest allowed
    * value. However, AOM_USAGE_GOOD_QUALITY treats 7..9 the same as 6. Also,
    * AOM_USAGE_REALTIME treats 0..4 the same as 5.
@@ -313,6 +313,10 @@ enum aome_enc_control_id {
 
   /*!\brief Codec control function to set number of spatial layers, int
    * parameter
+   *
+   * Valid range:
+   *   \li When using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, #AOM_MAX_SS_LAYERS]
+   *   \li When \em not using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, 3]
    */
   AOME_SET_NUMBER_SPATIAL_LAYERS = 27,
 
@@ -1136,6 +1140,10 @@ enum aome_enc_control_id {
    * - 4 = use modulation for user rating based perceptual quality optimization
    * - 5 = use modulation for HDR video
    * - 6 = use modulation for all intra using Variance Boost
+   *
+   * \attention Delta q modes 1-5 are unsupported and are silently ignored in
+   * non-RD mode. Non-RD mode is enabled by setting cpu-used >= 8 (all intra
+   * usage) and cpu-used >= 7 (realtime usage).
    */
   AV1E_SET_DELTAQ_MODE = 107,
 
@@ -1399,7 +1407,8 @@ enum aome_enc_control_id {
    */
   AV1E_SET_SVC_REF_FRAME_COMP_PRED = 147,
 
-  /*!\brief Set --deltaq-mode strength.
+  /*!\brief Set --deltaq-mode strength, where the value is a percentage,
+   * unsigned int parameter.
    *
    * Valid range: [0, 1000]
    */
@@ -1578,6 +1587,36 @@ enum aome_enc_control_id {
    */
   AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR = 169,
 
+  /*!\brief Codec control to enable the low complexity decode mode, unsigned
+   * int parameter. Value of zero means this mode is disabled.
+   */
+  AV1E_SET_ENABLE_LOW_COMPLEXITY_DECODE = 170,
+
+  /*!\brief Codec control to set the screen content detection mode,
+   * aom_screen_detection_mode parameter.
+   *
+   * - 1: AOM_SCREEN_DETECTION_STANDARD = standard (default)
+   * - 2: AOM_SCREEN_DETECTION_ANTIALIASING_AWARE = anti-aliased text and
+   *   graphics aware
+   */
+  AV1E_SET_SCREEN_CONTENT_DETECTION_MODE = 171,
+
+  /*!\brief Codec control to enable adaptive sharpness, which modulates
+   * sharpness based on frame QP, unsigned int parameter.
+   *
+   * Adaptive sharpness helps mitigate blocking artifacts in the low to medium
+   * quality range.
+   *
+   * - 0 = disable (default)
+   * - 1 = enable
+   *
+   * \note When adaptive sharpness is enabled, AOME_SET_SHARPNESS acts as a
+   * "maximum sharpness" value. Adaptive sharpness can still modulate effective
+   * sharpness between 0 and the maximum sharpness. As a consequence, adaptive
+   * sharpness only has effects when sharpness is greater than 0.
+   */
+  AV1E_SET_ENABLE_ADAPTIVE_SHARPNESS = 172,
+
   // Any new encoder control IDs should be added above.
   // Maximum allowed encoder control ID is 229.
   // No encoder control ID should be added below.
@@ -1611,19 +1650,21 @@ typedef enum aom_scaling_mode_1d {
 /*!\brief  aom region of interest map
  *
  * These defines the data structures for the region of interest map
- *
- * TODO(yaowu): create a unit test for ROI map related APIs
- *
  */
 typedef struct aom_roi_map {
-  /*! An id between 0 and 7 for each 8x8 region within a frame. */
+  /*! If ROI is enabled. */
+  uint8_t enabled;
+  /*! An id between 0 and 7 for each 4x4 region within a frame. */
   unsigned char *roi_map;
-  unsigned int rows;              /**< Number of rows. */
-  unsigned int cols;              /**< Number of columns. */
-  int delta_q[AOM_MAX_SEGMENTS];  /**< Quantizer deltas. */
-  int delta_lf[AOM_MAX_SEGMENTS]; /**< Loop filter deltas. */
-  /*! Static breakout threshold for each segment. */
-  unsigned int static_threshold[AOM_MAX_SEGMENTS];
+  unsigned int rows;               /**< Number of rows. */
+  unsigned int cols;               /**< Number of columns. */
+  int delta_q[AOM_MAX_SEGMENTS];   /**< Quantizer deltas. */
+  int delta_lf[AOM_MAX_SEGMENTS];  /**< Loop filter deltas. */
+  int skip[AOM_MAX_SEGMENTS];      /**< Skip this block. */
+  int ref_frame[AOM_MAX_SEGMENTS]; /**< Reference frame for this block. */
+  int delta_qp_enabled;            /**< Delta qp feature enabled. */
+  int reference_enabled;           /**< Reference frame feature enabled. */
+  int rdmult_delta_qp;             /**< RD mult for delta qp feature. */
 } aom_roi_map_t;
 
 /*!\brief  aom active region map
@@ -1649,7 +1690,7 @@ typedef struct aom_scaling_mode {
   AOM_SCALING_MODE v_scaling_mode; /**< vertical scaling mode   */
 } aom_scaling_mode_t;
 
-/*!brief AV1 encoder content type */
+/*!\brief AV1 encoder content type */
 typedef enum {
   AOM_CONTENT_DEFAULT,
   AOM_CONTENT_SCREEN,
@@ -1657,7 +1698,15 @@ typedef enum {
   AOM_CONTENT_INVALID
 } aom_tune_content;
 
-/*!brief AV1 encoder timing info type signaling */
+/*!\brief Screen content detection mode */
+typedef enum {
+  /** Standard */
+  AOM_SCREEN_DETECTION_STANDARD = 1,
+  /** Anti-aliased text and graphics aware */
+  AOM_SCREEN_DETECTION_ANTIALIASING_AWARE = 2
+} aom_screen_detection_mode;
+
+/*!\brief AV1 encoder timing info type signaling */
 typedef enum {
   AOM_TIMING_UNSPECIFIED,
   AOM_TIMING_EQUAL,
@@ -1669,9 +1718,10 @@ typedef enum {
  * Changes the encoder to tune for certain types of input material.
  *
  * \note
- * AOM_TUNE_IQ is restricted to all intra mode (AOM_USAGE_ALL_INTRA). Setting
- * the tuning option to AOM_TUNE_IQ causes the following options to be set
- * (expressed as command-line options):
+ * AOM_TUNE_IQ and AOM_TUNE_SSIMULACRA2 are restricted to all intra mode
+ * (AOM_USAGE_ALL_INTRA). Setting the tuning option to either AOM_TUNE_IQ or
+ * AOM_TUNE_SSIMULACRA2 causes the following options to be set (expressed as
+ * command-line options):
  *   * --enable-qm=1
  *   * --qm-min=2
  *   * --qm-max=10
@@ -1680,6 +1730,9 @@ typedef enum {
  *   * --enable-cdef=3
  *   * --enable-chroma-deltaq=1
  *   * --deltaq-mode=6
+ *   * --screen-detection-mode=2
+ * AOM_TUNE_IQ additionally sets the following options:
+ *   * --enable-adaptive-sharpness=1
  */
 typedef enum {
   AOM_TUNE_PSNR = 0,
@@ -1698,6 +1751,12 @@ typedef enum {
    * the rdmult code with AOM_TUNE_SSIM.
    */
   AOM_TUNE_IQ = 10,
+/*!\brief Allows detection of the presence of AOM_TUNE_SSIMULACRA2 at compile
+ * time. */
+#define AOM_HAVE_TUNE_SSIMULACRA2 1
+  /* Tune that optimizes for maximum SSIMULACRA 2 scores. Shares the rdmult code
+     with AOM_TUNE_SSIM. */
+  AOM_TUNE_SSIMULACRA2 = 11,
 } aom_tune_metric;
 
 /*!\brief Distortion metric to use for RD optimization.
@@ -1721,21 +1780,33 @@ typedef enum {
 #define AOM_MAX_SS_LAYERS 4 /**< Max number of spatial layers */
 #define AOM_MAX_TS_LAYERS 8 /**< Max number of temporal layers */
 
-/*!brief Struct for spatial and temporal layer ID */
+/*!\brief Struct for spatial and temporal layer ID */
 typedef struct aom_svc_layer_id {
   int spatial_layer_id;  /**< Spatial layer ID */
   int temporal_layer_id; /**< Temporal layer ID */
 } aom_svc_layer_id_t;
 
-/*!brief Parameter type for SVC
+/*!\brief Parameter type for SVC
  *
  * In the arrays of size AOM_MAX_LAYERS, the index for spatial layer `sl` and
  * temporal layer `tl` is sl * number_temporal_layers + tl.
  *
  */
 typedef struct aom_svc_params {
-  int number_spatial_layers;                 /**< Number of spatial layers */
-  int number_temporal_layers;                /**< Number of temporal layers */
+  /*!Number of spatial layers
+   *
+   * Valid range:
+   *   \li When using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, #AOM_MAX_SS_LAYERS]
+   *   \li When \em not using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, 3]
+   */
+  int number_spatial_layers;
+  /*!Number of temporal layers
+   *
+   * Valid range:
+   *   \li When using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, #AOM_MAX_TS_LAYERS]
+   *   \li When \em not using #AV1E_SET_SVC_REF_FRAME_CONFIG: [1, 3]
+   */
+  int number_temporal_layers;
   int max_quantizers[AOM_MAX_LAYERS];        /**< Max Q for each layer */
   int min_quantizers[AOM_MAX_LAYERS];        /**< Min Q for each layer */
   int scaling_factor_num[AOM_MAX_SS_LAYERS]; /**< Scaling factor-numerator */
@@ -1746,7 +1817,7 @@ typedef struct aom_svc_params {
   int framerate_factor[AOM_MAX_TS_LAYERS];
 } aom_svc_params_t;
 
-/*!brief Parameters for setting ref frame config */
+/*!\brief Parameters for setting ref frame config */
 typedef struct aom_svc_ref_frame_config {
   // Three arrays need to be set: reference[], ref_id[], refresh[].
   // reference[i]: is a boolean flag to indicate which of the 7 possible
@@ -1769,14 +1840,14 @@ typedef struct aom_svc_ref_frame_config {
   int refresh[8]; /**< Refresh flag for each of the 8 buffer slots. */
 } aom_svc_ref_frame_config_t;
 
-/*!brief Parameters for setting ref frame compound prediction */
+/*!\brief Parameters for setting ref frame compound prediction */
 typedef struct aom_svc_ref_frame_comp_pred {
   // Use compound prediction for the ref_frame pairs GOLDEN_LAST (0),
   // LAST2_LAST (1), and ALTREF_LAST (2).
   int use_comp_pred[3]; /**<Compound reference flag. */
 } aom_svc_ref_frame_comp_pred_t;
 
-/*!brief Frame drop modes for spatial/quality layer SVC */
+/*!\brief Frame drop modes for spatial/quality layer SVC */
 typedef enum {
   AOM_LAYER_DROP,           /**< Any spatial layer can drop. */
   AOM_FULL_SUPERFRAME_DROP, /**< Only full superframe can drop. */
@@ -2279,6 +2350,16 @@ AOM_CTRL_USE_TYPE(AV1E_SET_POSTENCODE_DROP_RTC, int)
 AOM_CTRL_USE_TYPE(AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR, int)
 #define AOM_CTRL_AV1E_SET_MAX_CONSEC_FRAME_DROP_MS_CBR
 
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_LOW_COMPLEXITY_DECODE, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_LOW_COMPLEXITY_DECODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_SCREEN_CONTENT_DETECTION_MODE,
+                  int) /* aom_screen_detection_mode */
+#define AOM_CTRL_SET_SCREEN_CONTENT_DETECTION_MODE
+
+AOM_CTRL_USE_TYPE(AV1E_SET_ENABLE_ADAPTIVE_SHARPNESS, unsigned int)
+#define AOM_CTRL_AV1E_SET_ENABLE_ADAPTIVE_SHARPNESS
+
 /*!\endcond */
 /*! @} - end defgroup aom_encoder */
 #ifdef __cplusplus

package/include/ffi.h

@@ -1,5 +1,5 @@
 /* -----------------------------------------------------------------*-C-*-
-   libffi 3.5.1
+   libffi 3.5.2
      - Copyright (c) 2011, 2014, 2019, 2021, 2022, 2024, 2025 Anthony Green
      - Copyright (c) 1996-2003, 2007, 2008 Red Hat, Inc.
 
@@ -316,8 +316,8 @@ size_t ffi_java_raw_size (ffi_cif *cif) __attribute__((deprecated));
 
 /* ---- Version API ------------------------------------------------------ */
 
-#define FFI_VERSION_STRING "3.5.1"
-#define FFI_VERSION_NUMBER 30501
+#define FFI_VERSION_STRING "3.5.2"
+#define FFI_VERSION_NUMBER 30502
 
 #ifndef LIBFFI_ASM
 /* Return a version string. */

package/include/freetype2/freetype/config/ftconfig.h

@@ -4,7 +4,7 @@
  *
  *   ANSI-specific configuration file (specification only).
  *
- * Copyright (C) 1996-2024 by
+ * Copyright (C) 1996-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,

package/include/freetype2/freetype/config/ftheader.h

@@ -4,7 +4,7 @@
  *
  *   Build macros of the FreeType 2 library.
  *
- * Copyright (C) 1996-2024 by
+ * Copyright (C) 1996-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,

package/include/freetype2/freetype/config/ftoption.h

@@ -4,7 +4,7 @@
  *
  *   User-selectable configuration macros (specification only).
  *
- * Copyright (C) 1996-2024 by
+ * Copyright (C) 1996-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,
@@ -158,12 +158,12 @@ FT_BEGIN_HEADER
 
   /**************************************************************************
    *
-   * If this macro is defined, try to use an inlined assembler version of the
-   * @FT_MulFix function, which is a 'hotspot' when loading and hinting
-   * glyphs, and which should be executed as fast as possible.
+   * If this macro is defined, try to use an inlined 64-bit or assembler
+   * version of the @FT_MulFix function, which is a 'hotspot' when loading
+   * and hinting glyphs, and which should be executed as fast as possible.
    *
-   * Note that if your compiler or CPU is not supported, this will default to
-   * the standard and portable implementation found in `ftcalc.c`.
+   * If your compiler is not C99-compliant or CPU assembly is not supported,
+   * you can disable this option.
    */
 #define FT_CONFIG_OPTION_INLINE_MULFIX
 
@@ -293,6 +293,31 @@ FT_BEGIN_HEADER
 #define FT_CONFIG_OPTION_USE_HARFBUZZ
 
 
+  /**************************************************************************
+   *
+   * HarfBuzz dynamic support.
+   *
+   *   Define this macro if you want the HarfBuzz library to be loaded at
+   *   runtime instead of being linked to FreeType.
+   *
+   *   This option has no effect if `FT_CONFIG_OPTION_USE_HARFBUZZ` is not
+   *   defined.
+   *
+   *   When this option is enabled, FreeType will try to load the HarfBuzz
+   *   library at runtime, using `dlopen` or `LoadLibrary`, depending on the
+   *   platform.  On Microsoft platforms, the library name looked up is
+   *   `libharfbuzz-0.dll`.  On Apple platforms, the library name looked up
+   *   is `libharfbuzz.0.dylib`.  On all other platforms, the library name
+   *   looked up is `libharfbuzz.so.0`.  This name can be overridden by
+   *   defining the macro `FT_LIBHARFBUZZ` at FreeType compilation time.
+   *
+   *   If you use a build system like cmake or the `configure` script,
+   *   options set by those programs have precedence, overwriting the value
+   *   here with the configured one.
+   */
+/* #define FT_CONFIG_OPTION_USE_HARFBUZZ_DYNAMIC */
+
+
   /**************************************************************************
    *
    * Brotli support.
@@ -679,7 +704,7 @@ FT_BEGIN_HEADER
    * defined.
    *
    * [1]
-   * https://www.microsoft.com/typography/cleartype/truetypecleartype.aspx
+   * https://learn.microsoft.com/typography/cleartype/truetypecleartype
    */
 #define TT_CONFIG_OPTION_SUBPIXEL_HINTING
 
@@ -697,7 +722,7 @@ FT_BEGIN_HEADER
    * flags array which can be used to disambiguate, but old fonts will not
    * have them.
    *
-   *   https://www.microsoft.com/typography/otspec/glyf.htm
+   *   https://learn.microsoft.com/typography/opentype/spec/glyf
    *   https://developer.apple.com/fonts/TrueType-Reference-Manual/RM06/Chap6glyf.html
    */
 #undef TT_CONFIG_OPTION_COMPONENT_OFFSET_SCALED
@@ -760,10 +785,10 @@ FT_BEGIN_HEADER
   /**************************************************************************
    *
    * Option `TT_CONFIG_OPTION_GPOS_KERNING` enables a basic GPOS kerning
-   * implementation (for TrueType fonts only).  With this defined, FreeType
-   * is able to get kerning pair data from the GPOS 'kern' feature as well as
-   * legacy 'kern' tables; without this defined, FreeType will only be able
-   * to use legacy 'kern' tables.
+   * implementation (for TrueType and OpenType fonts only).  With this
+   * defined, FreeType is able to get kerning pair data from the GPOS 'kern'
+   * feature as well as legacy 'kern' tables; without this defined, FreeType
+   * will only be able to use legacy 'kern' tables.
    *
    * Note that FreeType does not support more advanced GPOS layout features;
    * even the 'kern' feature implemented here doesn't handle more

package/include/freetype2/freetype/config/ftstdlib.h

@@ -5,7 +5,7 @@
  *   ANSI-specific library and header configuration file (specification
  *   only).
  *
- * Copyright (C) 2002-2024 by
+ * Copyright (C) 2002-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,

package/include/freetype2/freetype/config/integer-types.h

@@ -4,7 +4,7 @@
  *
  *   FreeType integer types definitions.
  *
- * Copyright (C) 1996-2024 by
+ * Copyright (C) 1996-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,
@@ -17,6 +17,8 @@
 #ifndef FREETYPE_CONFIG_INTEGER_TYPES_H_
 #define FREETYPE_CONFIG_INTEGER_TYPES_H_
 
+FT_BEGIN_HEADER
+
   /* There are systems (like the Texas Instruments 'C54x) where a `char`  */
   /* has 16~bits.  ANSI~C says that `sizeof(char)` is always~1.  Since an */
   /* `int` has 16~bits also for this system, `sizeof(int)` gives~1 which  */
@@ -242,9 +244,34 @@
 #endif /* FT_SIZEOF_LONG == (64 / FT_CHAR_BIT) */
 
 #ifdef FT_INT64
+
   typedef FT_INT64   FT_Int64;
   typedef FT_UINT64  FT_UInt64;
-#endif
 
+#  define FT_INT64_ZERO  0
+
+#else  /* !FT_INT64 */
+
+  /* we need to emulate 64-bit data types if none are available */
+
+  typedef struct  FT_Int64_
+  {
+    FT_UInt32  lo;
+    FT_UInt32  hi;
+
+  } FT_Int64;
+
+  typedef struct  FT_UInt64_
+  {
+    FT_UInt32  lo;
+    FT_UInt32  hi;
+
+  } FT_UInt64;
+
+#  define FT_INT64_ZERO  { 0, 0 }
+
+#endif /* !FT_INT64 */
+
+FT_END_HEADER
 
 #endif  /* FREETYPE_CONFIG_INTEGER_TYPES_H_ */

package/include/freetype2/freetype/config/mac-support.h

@@ -4,7 +4,7 @@
  *
  *   Mac/OS X support configuration header.
  *
- * Copyright (C) 1996-2024 by
+ * Copyright (C) 1996-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,

package/include/freetype2/freetype/config/public-macros.h

@@ -4,7 +4,7 @@
  *
  *   Define a set of compiler macros used in public FreeType headers.
  *
- * Copyright (C) 2020-2024 by
+ * Copyright (C) 2020-2025 by
  * David Turner, Robert Wilhelm, and Werner Lemberg.
  *
  * This file is part of the FreeType project, and may only be used,
@@ -62,8 +62,8 @@ FT_BEGIN_HEADER
    * because it is needed by `FT_EXPORT`.
    */
 
-  /* Visual C, mingw */
-#if defined( _WIN32 )
+  /* Visual C, MinGW, Cygwin */
+#if defined( _WIN32 ) || defined( __CYGWIN__ )
 
 #if defined( FT2_BUILD_LIBRARY ) && defined( DLL_EXPORT )
 #define FT_PUBLIC_FUNCTION_ATTRIBUTE  __declspec( dllexport )