@gguf/pigbot 0.0.5 → 0.0.7

package/docs/cli/gateway.md

@@ -1,5 +1,5 @@
 ---
-summary: "Moltbot Gateway CLI (`moltbot gateway`) — run, query, and discover gateways"
+summary: "OpenClaw Gateway CLI (`openclaw gateway`) — run, query, and discover gateways"
 read_when:
   - Running the Gateway from the CLI (dev or servers)
   - Debugging Gateway auth, bind modes, and connectivity
@@ -8,9 +8,9 @@ read_when:
 
 # Gateway CLI
 
-The Gateway is Moltbot’s WebSocket server (channels, nodes, sessions, hooks).
+The Gateway is OpenClaw’s WebSocket server (channels, nodes, sessions, hooks).
 
-Subcommands in this page live under `moltbot gateway …`.
+Subcommands in this page live under `openclaw gateway …`.
 
 Related docs:
 - [/gateway/bonjour](/gateway/bonjour)
@@ -22,17 +22,17 @@ Related docs:
 Run a local Gateway process:
 
 ```bash
-moltbot gateway
+openclaw gateway
 ```
 
 Foreground alias:
 
 ```bash
-moltbot gateway run
+openclaw gateway run
 ```
 
 Notes:
-- By default, the Gateway refuses to start unless `gateway.mode=local` is set in `~/.clawdbot/moltbot.json`. Use `--allow-unconfigured` for ad-hoc/dev runs.
+- By default, the Gateway refuses to start unless `gateway.mode=local` is set in `~/.openclaw/openclaw.json`. Use `--allow-unconfigured` for ad-hoc/dev runs.
 - Binding beyond loopback without auth is blocked (safety guardrail).
 - `SIGUSR1` triggers an in-process restart when authorized (enable `commands.restart` or use the gateway tool/config apply/update).
 - `SIGINT`/`SIGTERM` handlers stop the gateway process, but they don’t restore any custom terminal state. If you wrap the CLI with a TUI or raw-mode input, restore the terminal before exit.
@@ -42,8 +42,8 @@ Notes:
 - `--port <port>`: WebSocket port (default comes from config/env; usually `18789`).
 - `--bind <loopback|lan|tailnet|auto|custom>`: listener bind mode.
 - `--auth <token|password>`: auth mode override.
-- `--token <token>`: token override (also sets `CLAWDBOT_GATEWAY_TOKEN` for the process).
-- `--password <password>`: password override (also sets `CLAWDBOT_GATEWAY_PASSWORD` for the process).
+- `--token <token>`: token override (also sets `OPENCLAW_GATEWAY_TOKEN` for the process).
+- `--password <password>`: password override (also sets `OPENCLAW_GATEWAY_PASSWORD` for the process).
 - `--tailscale <off|serve|funnel>`: expose the Gateway via Tailscale.
 - `--tailscale-reset-on-exit`: reset Tailscale serve/funnel config on shutdown.
 - `--allow-unconfigured`: allow gateway start without `gateway.mode=local` in config.
@@ -76,7 +76,7 @@ Shared options (where supported):
 ### `gateway health`
 
 ```bash
-moltbot gateway health --url ws://127.0.0.1:18789
+openclaw gateway health --url ws://127.0.0.1:18789
 ```
 
 ### `gateway status`
@@ -84,8 +84,8 @@ moltbot gateway health --url ws://127.0.0.1:18789
 `gateway status` shows the Gateway service (launchd/systemd/schtasks) plus an optional RPC probe.
 
 ```bash
-moltbot gateway status
-moltbot gateway status --json
+openclaw gateway status
+openclaw gateway status --json
 ```
 
 Options:
@@ -105,8 +105,8 @@ Options:
 If multiple gateways are reachable, it prints all of them. Multiple gateways are supported when you use isolated profiles/ports (e.g., a rescue bot), but most installs still run a single gateway.
 
 ```bash
-moltbot gateway probe
-moltbot gateway probe --json
+openclaw gateway probe
+openclaw gateway probe --json
 ```
 
 #### Remote over SSH (Mac app parity)
@@ -116,7 +116,7 @@ The macOS app “Remote over SSH” mode uses a local port-forward so the remote
 CLI equivalent:
 
 ```bash
-moltbot gateway probe --ssh user@gateway-host
+openclaw gateway probe --ssh user@gateway-host
 ```
 
 Options:
@@ -133,18 +133,18 @@ Config (optional, used as defaults):
 Low-level RPC helper.
 
 ```bash
-moltbot gateway call status
-moltbot gateway call logs.tail --params '{"sinceMs": 60000}'
+openclaw gateway call status
+openclaw gateway call logs.tail --params '{"sinceMs": 60000}'
 ```
 
 ## Manage the Gateway service
 
 ```bash
-moltbot gateway install
-moltbot gateway start
-moltbot gateway stop
-moltbot gateway restart
-moltbot gateway uninstall
+openclaw gateway install
+openclaw gateway start
+openclaw gateway stop
+openclaw gateway restart
+openclaw gateway uninstall
 ```
 
 Notes:
@@ -153,10 +153,10 @@ Notes:
 
 ## Discover gateways (Bonjour)
 
-`gateway discover` scans for Gateway beacons (`_moltbot-gw._tcp`).
+`gateway discover` scans for Gateway beacons (`_openclaw-gw._tcp`).
 
 - Multicast DNS-SD: `local.`
-- Unicast DNS-SD (Wide-Area Bonjour): `moltbot.internal.` (requires split DNS + DNS server; see [/gateway/bonjour](/gateway/bonjour))
+- Unicast DNS-SD (Wide-Area Bonjour): choose a domain (example: `openclaw.internal.`) and set up split DNS + a DNS server; see [/gateway/bonjour](/gateway/bonjour)
 
 Only gateways with Bonjour discovery enabled (default) advertise the beacon.
 
@@ -172,7 +172,7 @@ Wide-Area discovery records include (TXT):
 ### `gateway discover`
 
 ```bash
-moltbot gateway discover
+openclaw gateway discover
 ```
 
 Options:
@@ -182,6 +182,6 @@ Options:
 Examples:
 
 ```bash
-moltbot gateway discover --timeout 4000
-moltbot gateway discover --json | jq '.beacons[].wsUrl'
+openclaw gateway discover --timeout 4000
+openclaw gateway discover --json | jq '.beacons[].wsUrl'
 ```

package/docs/cli/health.md

@@ -1,17 +1,17 @@
 ---
-summary: "CLI reference for `moltbot health` (gateway health endpoint via RPC)"
+summary: "CLI reference for `openclaw health` (gateway health endpoint via RPC)"
 read_when:
   - You want to quickly check the running Gateway’s health
 ---
 
-# `moltbot health`
+# `openclaw health`
 
 Fetch health from the running Gateway.
 
 ```bash
-moltbot health
-moltbot health --json
-moltbot health --verbose
+openclaw health
+openclaw health --json
+openclaw health --verbose
 ```
 
 Notes:

package/docs/cli/hooks.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot hooks` (agent hooks)"
+summary: "CLI reference for `openclaw hooks` (agent hooks)"
 read_when:
   - You want to manage agent hooks
   - You want to install or update hooks
 ---
 
-# `moltbot hooks`
+# `openclaw hooks`
 
 Manage agent hooks (event-driven automations for commands like `/new`, `/reset`, and gateway startup).
 
@@ -16,7 +16,7 @@ Related:
 ## List All Hooks
 
 ```bash
-moltbot hooks list
+openclaw hooks list
 ```
 
 List all discovered hooks from workspace, managed, and bundled directories.
@@ -41,7 +41,7 @@ Ready:
 **Example (verbose):**
 
 ```bash
-moltbot hooks list --verbose
+openclaw hooks list --verbose
 ```
 
 Shows missing requirements for ineligible hooks.
@@ -49,7 +49,7 @@ Shows missing requirements for ineligible hooks.
 **Example (JSON):**
 
 ```bash
-moltbot hooks list --json
+openclaw hooks list --json
 ```
 
 Returns structured JSON for programmatic use.
@@ -57,7 +57,7 @@ Returns structured JSON for programmatic use.
 ## Get Hook Information
 
 ```bash
-moltbot hooks info <name>
+openclaw hooks info <name>
 ```
 
 Show detailed information about a specific hook.
@@ -71,7 +71,7 @@ Show detailed information about a specific hook.
 **Example:**
 
 ```bash
-moltbot hooks info session-memory
+openclaw hooks info session-memory
 ```
 
 **Output:**
@@ -82,10 +82,10 @@ moltbot hooks info session-memory
 Save session context to memory when /new command is issued
 
 Details:
-  Source: moltbot-bundled
-  Path: /path/to/moltbot/hooks/bundled/session-memory/HOOK.md
-  Handler: /path/to/moltbot/hooks/bundled/session-memory/handler.ts
-  Homepage: https://docs.molt.bot/hooks#session-memory
+  Source: openclaw-bundled
+  Path: /path/to/openclaw/hooks/bundled/session-memory/HOOK.md
+  Handler: /path/to/openclaw/hooks/bundled/session-memory/handler.ts
+  Homepage: https://docs.openclaw.ai/hooks#session-memory
   Events: command:new
 
 Requirements:
@@ -95,7 +95,7 @@ Requirements:
 ## Check Hooks Eligibility
 
 ```bash
-moltbot hooks check
+openclaw hooks check
 ```
 
 Show summary of hook eligibility status (how many are ready vs. not ready).
@@ -116,12 +116,12 @@ Not ready: 0
 ## Enable a Hook
 
 ```bash
-moltbot hooks enable <name>
+openclaw hooks enable <name>
 ```
 
-Enable a specific hook by adding it to your config (`~/.clawdbot/config.json`).
+Enable a specific hook by adding it to your config (`~/.openclaw/config.json`).
 
-**Note:** Hooks managed by plugins show `plugin:<id>` in `moltbot hooks list` and
+**Note:** Hooks managed by plugins show `plugin:<id>` in `openclaw hooks list` and
 can’t be enabled/disabled here. Enable/disable the plugin instead.
 
 **Arguments:**
@@ -130,7 +130,7 @@ can’t be enabled/disabled here. Enable/disable the plugin instead.
 **Example:**
 
 ```bash
-moltbot hooks enable session-memory
+openclaw hooks enable session-memory
 ```
 
 **Output:**
@@ -150,7 +150,7 @@ moltbot hooks enable session-memory
 ## Disable a Hook
 
 ```bash
-moltbot hooks disable <name>
+openclaw hooks disable <name>
 ```
 
 Disable a specific hook by updating your config.
@@ -161,7 +161,7 @@ Disable a specific hook by updating your config.
 **Example:**
 
 ```bash
-moltbot hooks disable command-logger
+openclaw hooks disable command-logger
 ```
 
 **Output:**
@@ -176,13 +176,13 @@ moltbot hooks disable command-logger
 ## Install Hooks
 
 ```bash
-moltbot hooks install <path-or-spec>
+openclaw hooks install <path-or-spec>
 ```
 
 Install a hook pack from a local folder/archive or npm.
 
 **What it does:**
-- Copies the hook pack into `~/.clawdbot/hooks/<id>`
+- Copies the hook pack into `~/.openclaw/hooks/<id>`
 - Enables the installed hooks in `hooks.internal.entries.*`
 - Records the install under `hooks.internal.installs`
 
@@ -195,23 +195,23 @@ Install a hook pack from a local folder/archive or npm.
 
 ```bash
 # Local directory
-moltbot hooks install ./my-hook-pack
+openclaw hooks install ./my-hook-pack
 
 # Local archive
-moltbot hooks install ./my-hook-pack.zip
+openclaw hooks install ./my-hook-pack.zip
 
 # NPM package
-moltbot hooks install @moltbot/my-hook-pack
+openclaw hooks install @openclaw/my-hook-pack
 
 # Link a local directory without copying
-moltbot hooks install -l ./my-hook-pack
+openclaw hooks install -l ./my-hook-pack
 ```
 
 ## Update Hooks
 
 ```bash
-moltbot hooks update <id>
-moltbot hooks update --all
+openclaw hooks update <id>
+openclaw hooks update --all
 ```
 
 Update installed hook packs (npm installs only).
@@ -229,10 +229,10 @@ Saves session context to memory when you issue `/new`.
 **Enable:**
 
 ```bash
-moltbot hooks enable session-memory
+openclaw hooks enable session-memory
 ```
 
-**Output:** `~/clawd/memory/YYYY-MM-DD-slug.md`
+**Output:** `~/.openclaw/workspace/memory/YYYY-MM-DD-slug.md`
 
 **See:** [session-memory documentation](/hooks#session-memory)
 
@@ -243,22 +243,22 @@ Logs all command events to a centralized audit file.
 **Enable:**
 
 ```bash
-moltbot hooks enable command-logger
+openclaw hooks enable command-logger
 ```
 
-**Output:** `~/.clawdbot/logs/commands.log`
+**Output:** `~/.openclaw/logs/commands.log`
 
 **View logs:**
 
 ```bash
 # Recent commands
-tail -n 20 ~/.clawdbot/logs/commands.log
+tail -n 20 ~/.openclaw/logs/commands.log
 
 # Pretty-print
-cat ~/.clawdbot/logs/commands.log | jq .
+cat ~/.openclaw/logs/commands.log | jq .
 
 # Filter by action
-grep '"action":"new"' ~/.clawdbot/logs/commands.log | jq .
+grep '"action":"new"' ~/.openclaw/logs/commands.log | jq .
 ```
 
 **See:** [command-logger documentation](/hooks#command-logger)
@@ -270,7 +270,7 @@ Swaps injected `SOUL.md` content with `SOUL_EVIL.md` during a purge window or by
 **Enable:**
 
 ```bash
-moltbot hooks enable soul-evil
+openclaw hooks enable soul-evil
 ```
 
 **See:** [SOUL Evil Hook](/hooks/soul-evil)
@@ -284,7 +284,7 @@ Runs `BOOT.md` when the gateway starts (after channels start).
 **Enable**:
 
 ```bash
-moltbot hooks enable boot-md
+openclaw hooks enable boot-md
 ```
 
 **See:** [boot-md documentation](/hooks#boot-md)

package/docs/cli/index.md

@@ -1,5 +1,5 @@
 ---
-summary: "Moltbot CLI reference for `moltbot` commands, subcommands, and options"
+summary: "OpenClaw CLI reference for `openclaw` commands, subcommands, and options"
 read_when:
   - Adding or modifying CLI commands or options
   - Documenting new command surfaces
@@ -53,10 +53,10 @@ This page describes the current CLI behavior. If commands change, update this do
 
 ## Global flags
 
-- `--dev`: isolate state under `~/.clawdbot-dev` and shift default ports.
-- `--profile <name>`: isolate state under `~/.clawdbot-<name>`.
+- `--dev`: isolate state under `~/.openclaw-dev` and shift default ports.
+- `--profile <name>`: isolate state under `~/.openclaw-<name>`.
 - `--no-color`: disable ANSI colors.
-- `--update`: shorthand for `moltbot update` (source installs only).
+- `--update`: shorthand for `openclaw update` (source installs only).
 - `-V`, `--version`, `-v`: print version and exit.
 
 ## Output styling
@@ -69,7 +69,7 @@ This page describes the current CLI behavior. If commands change, update this do
 
 ## Color palette
 
-Moltbot uses a lobster palette for CLI output.
+OpenClaw uses a lobster palette for CLI output.
 
 - `accent` (#FF5A2D): headings, labels, primary highlights.
 - `accentBright` (#FF7A3D): command names, emphasis.
@@ -85,7 +85,7 @@ Palette source of truth: `src/terminal/palette.ts` (aka “lobster seam”).
 ## Command tree
 
 ```
-moltbot [--dev] [--profile <name>] <command>
+openclaw [--dev] [--profile <name>] <command>
   setup
   onboard
   configure
@@ -236,23 +236,23 @@ moltbot [--dev] [--profile <name>] <command>
   tui
 ```
 
-Note: plugins can add additional top-level commands (for example `moltbot voicecall`).
+Note: plugins can add additional top-level commands (for example `openclaw voicecall`).
 
 ## Security
 
-- `moltbot security audit` — audit config + local state for common security foot-guns.
-- `moltbot security audit --deep` — best-effort live Gateway probe.
-- `moltbot security audit --fix` — tighten safe defaults and chmod state/config.
+- `openclaw security audit` — audit config + local state for common security foot-guns.
+- `openclaw security audit --deep` — best-effort live Gateway probe.
+- `openclaw security audit --fix` — tighten safe defaults and chmod state/config.
 
 ## Plugins
 
 Manage extensions and their config:
 
-- `moltbot plugins list` — discover plugins (use `--json` for machine output).
-- `moltbot plugins info <id>` — show details for a plugin.
-- `moltbot plugins install <path|.tgz|npm-spec>` — install a plugin (or add a plugin path to `plugins.load.paths`).
-- `moltbot plugins enable <id>` / `disable <id>` — toggle `plugins.entries.<id>.enabled`.
-- `moltbot plugins doctor` — report plugin load errors.
+- `openclaw plugins list` — discover plugins (use `--json` for machine output).
+- `openclaw plugins info <id>` — show details for a plugin.
+- `openclaw plugins install <path|.tgz|npm-spec>` — install a plugin (or add a plugin path to `plugins.load.paths`).
+- `openclaw plugins enable <id>` / `disable <id>` — toggle `plugins.entries.<id>.enabled`.
+- `openclaw plugins doctor` — report plugin load errors.
 
 Most plugin changes require a gateway restart. See [/plugin](/plugin).
 
@@ -260,9 +260,9 @@ Most plugin changes require a gateway restart. See [/plugin](/plugin).
 
 Vector search over `MEMORY.md` + `memory/*.md`:
 
-- `moltbot memory status` — show index stats.
-- `moltbot memory index` — reindex memory files.
-- `moltbot memory search "<query>"` — semantic search over memory.
+- `openclaw memory status` — show index stats.
+- `openclaw memory index` — reindex memory files.
+- `openclaw memory search "<query>"` — semantic search over memory.
 
 ## Chat slash commands
 
@@ -279,7 +279,7 @@ Highlights:
 Initialize config + workspace.
 
 Options:
-- `--workspace <dir>`: agent workspace path (default `~/clawd`).
+- `--workspace <dir>`: agent workspace path (default `~/.openclaw/workspace`).
 - `--wizard`: run the onboarding wizard.
 - `--non-interactive`: run wizard without prompts.
 - `--mode <local|remote>`: wizard mode.
@@ -335,7 +335,7 @@ Options:
 Interactive configuration wizard (models, channels, skills, gateway).
 
 ### `config`
-Non-interactive config helpers (get/set/unset). Running `moltbot config` with no
+Non-interactive config helpers (get/set/unset). Running `openclaw config` with no
 subcommand launches the wizard.
 
 Subcommands:
@@ -359,8 +359,8 @@ Manage chat channel accounts (WhatsApp/Telegram/Discord/Google Chat/Slack/Matter
 
 Subcommands:
 - `channels list`: show configured channels and auth profiles.
-- `channels status`: check gateway reachability and channel health (`--probe` runs extra checks; use `moltbot health` or `moltbot status --deep` for gateway health probes).
-- Tip: `channels status` prints warnings with suggested fixes when it can detect common misconfigurations (then points you to `moltbot doctor`).
+- `channels status`: check gateway reachability and channel health (`--probe` runs extra checks; use `openclaw health` or `openclaw status --deep` for gateway health probes).
+- Tip: `channels status` prints warnings with suggested fixes when it can detect common misconfigurations (then points you to `openclaw doctor`).
 - `channels logs`: show recent channel logs from the gateway log file.
 - `channels add`: wizard-style setup when no flags are passed; flags switch to non-interactive mode.
 - `channels remove`: disable by default; pass `--delete` to remove config entries without prompts.
@@ -394,11 +394,11 @@ More detail: [/concepts/oauth](/concepts/oauth)
 
 Examples:
 ```bash
-moltbot channels add --channel telegram --account alerts --name "Alerts Bot" --token $TELEGRAM_BOT_TOKEN
-moltbot channels add --channel discord --account work --name "Work Bot" --token $DISCORD_BOT_TOKEN
-moltbot channels remove --channel discord --account work --delete
-moltbot channels status --probe
-moltbot status --deep
+openclaw channels add --channel telegram --account alerts --name "Alerts Bot" --token $TELEGRAM_BOT_TOKEN
+openclaw channels add --channel discord --account work --name "Work Bot" --token $DISCORD_BOT_TOKEN
+openclaw channels remove --channel discord --account work --delete
+openclaw channels status --probe
+openclaw status --deep
 ```
 
 ### `skills`
@@ -455,8 +455,8 @@ Subcommands:
 - `message event <list|create>`
 
 Examples:
-- `moltbot message send --target +15555550123 --message "Hi"`
-- `moltbot message poll --channel discord --target channel:123 --poll-question "Snack?" --poll-option Pizza --poll-option Sushi`
+- `openclaw message send --target +15555550123 --message "Hi"`
+- `openclaw message poll --channel discord --target channel:123 --poll-question "Snack?" --poll-option Pizza --poll-option Sushi`
 
 ### `agent`
 Run one agent turn via the Gateway (or `--local` embedded).
@@ -526,11 +526,11 @@ Notes:
 - Overview includes Gateway + node host service status when available.
 
 ### Usage tracking
-Moltbot can surface provider usage/quota when OAuth/API creds are available.
+OpenClaw can surface provider usage/quota when OAuth/API creds are available.
 
 Surfaces:
 - `/status` (adds a short provider usage line when available)
-- `moltbot status --usage` (prints full provider breakdown)
+- `openclaw status --usage` (prints full provider breakdown)
 - macOS menu bar (Usage section under Context)
 
 Notes:
@@ -624,7 +624,7 @@ Subcommands:
 Notes:
 - `gateway status` probes the Gateway RPC by default using the service’s resolved port/config (override with `--url/--token/--password`).
 - `gateway status` supports `--no-probe`, `--deep`, and `--json` for scripting.
-- `gateway status` also surfaces legacy or extra gateway services when it can detect them (`--deep` adds system-level scans). Profile-named Moltbot services are treated as first-class and aren't flagged as "extra".
+- `gateway status` also surfaces legacy or extra gateway services when it can detect them (`--deep` adds system-level scans). Profile-named OpenClaw services are treated as first-class and aren't flagged as "extra".
 - `gateway status` prints which config path the CLI uses vs which config the service likely uses (service env), plus the resolved probe target URL.
 - `gateway install|uninstall|start|stop|restart` support `--json` for scripting (default output stays human-friendly).
 - `gateway install` defaults to Node runtime; bun is **not recommended** (WhatsApp/Telegram bugs).
@@ -639,11 +639,11 @@ Notes:
 
 Examples:
 ```bash
-moltbot logs --follow
-moltbot logs --limit 200
-moltbot logs --plain
-moltbot logs --json
-moltbot logs --no-color
+openclaw logs --follow
+openclaw logs --limit 200
+openclaw logs --plain
+openclaw logs --json
+openclaw logs --no-color
 ```
 
 ### `gateway <subcommand>`
@@ -674,12 +674,12 @@ Preferred Anthropic auth (setup-token):
 
 ```bash
 claude setup-token
-moltbot models auth setup-token --provider anthropic
-moltbot models status
+openclaw models auth setup-token --provider anthropic
+openclaw models status
 ```
 
 ### `models` (root)
-`moltbot models` is an alias for `models status`.
+`openclaw models` is an alias for `models status`.
 
 Root options:
 - `--status-json` (alias for `models status --json`)
@@ -807,7 +807,7 @@ All `cron` commands accept `--url`, `--token`, `--timeout`, `--expect-final`.
 ## Node host
 
 `node` runs a **headless node host** or manages it as a background service. See
-[`moltbot node`](/cli/node).
+[`openclaw node`](/cli/node).
 
 Subcommands:
 - `node run --host <gateway-host> --port 18789`
@@ -856,7 +856,7 @@ Location:
 
 ## Browser
 
-Browser control CLI (dedicated Chrome/Brave/Edge/Chromium). See [`moltbot browser`](/cli/browser) and the [Browser tool](/tools/browser).
+Browser control CLI (dedicated Chrome/Brave/Edge/Chromium). See [`openclaw browser`](/cli/browser) and the [Browser tool](/tools/browser).
 
 Common options:
 - `--url`, `--token`, `--timeout`, `--json`

package/docs/cli/logs.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot logs` (tail gateway logs via RPC)"
+summary: "CLI reference for `openclaw logs` (tail gateway logs via RPC)"
 read_when:
   - You need to tail Gateway logs remotely (without SSH)
   - You want JSON log lines for tooling
 ---
 
-# `moltbot logs`
+# `openclaw logs`
 
 Tail Gateway file logs over RPC (works in remote mode).
 
@@ -15,9 +15,9 @@ Related:
 ## Examples
 
 ```bash
-moltbot logs
-moltbot logs --follow
-moltbot logs --json
-moltbot logs --limit 500
+openclaw logs
+openclaw logs --follow
+openclaw logs --json
+openclaw logs --limit 500
 ```
 

package/docs/cli/memory.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot memory` (status/index/search)"
+summary: "CLI reference for `openclaw memory` (status/index/search)"
 read_when:
   - You want to index or search semantic memory
   - You’re debugging memory availability or indexing
 ---
 
-# `moltbot memory`
+# `openclaw memory`
 
 Manage semantic memory indexing and search.
 Provided by the active memory plugin (default: `memory-core`; set `plugins.slots.memory = "none"` to disable).
@@ -17,15 +17,15 @@ Related:
 ## Examples
 
 ```bash
-moltbot memory status
-moltbot memory status --deep
-moltbot memory status --deep --index
-moltbot memory status --deep --index --verbose
-moltbot memory index
-moltbot memory index --verbose
-moltbot memory search "release checklist"
-moltbot memory status --agent main
-moltbot memory index --agent main --verbose
+openclaw memory status
+openclaw memory status --deep
+openclaw memory status --deep --index
+openclaw memory status --deep --index --verbose
+openclaw memory index
+openclaw memory index --verbose
+openclaw memory search "release checklist"
+openclaw memory status --agent main
+openclaw memory index --agent main --verbose
 ```
 
 ## Options
@@ -39,3 +39,4 @@ Notes:
 - `memory status --deep` probes vector + embedding availability.
 - `memory status --deep --index` runs a reindex if the store is dirty.
 - `memory index --verbose` prints per-phase details (provider, model, sources, batch activity).
+- `memory status` includes any extra paths configured via `memorySearch.extraPaths`.