@gguf/pigbot 0.0.5 → 0.0.7

package/docs/cli/approvals.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot approvals` (exec approvals for gateway or node hosts)"
+summary: "CLI reference for `openclaw approvals` (exec approvals for gateway or node hosts)"
 read_when:
   - You want to edit exec approvals from the CLI
   - You need to manage allowlists on gateway or node hosts
 ---
 
-# `moltbot approvals`
+# `openclaw approvals`
 
 Manage exec approvals for the **local host**, **gateway host**, or a **node host**.
 By default, commands target the local approvals file on disk. Use `--gateway` to target the gateway, or `--node` to target a specific node.
@@ -17,32 +17,32 @@ Related:
 ## Common commands
 
 ```bash
-moltbot approvals get
-moltbot approvals get --node <id|name|ip>
-moltbot approvals get --gateway
+openclaw approvals get
+openclaw approvals get --node <id|name|ip>
+openclaw approvals get --gateway
 ```
 
 ## Replace approvals from a file
 
 ```bash
-moltbot approvals set --file ./exec-approvals.json
-moltbot approvals set --node <id|name|ip> --file ./exec-approvals.json
-moltbot approvals set --gateway --file ./exec-approvals.json
+openclaw approvals set --file ./exec-approvals.json
+openclaw approvals set --node <id|name|ip> --file ./exec-approvals.json
+openclaw approvals set --gateway --file ./exec-approvals.json
 ```
 
 ## Allowlist helpers
 
 ```bash
-moltbot approvals allowlist add "~/Projects/**/bin/rg"
-moltbot approvals allowlist add --agent main --node <id|name|ip> "/usr/bin/uptime"
-moltbot approvals allowlist add --agent "*" "/usr/bin/uname"
+openclaw approvals allowlist add "~/Projects/**/bin/rg"
+openclaw approvals allowlist add --agent main --node <id|name|ip> "/usr/bin/uptime"
+openclaw approvals allowlist add --agent "*" "/usr/bin/uname"
 
-moltbot approvals allowlist remove "~/Projects/**/bin/rg"
+openclaw approvals allowlist remove "~/Projects/**/bin/rg"
 ```
 
 ## Notes
 
-- `--node` uses the same resolver as `moltbot nodes` (id, name, ip, or id prefix).
+- `--node` uses the same resolver as `openclaw nodes` (id, name, ip, or id prefix).
 - `--agent` defaults to `"*"`, which applies to all agents.
 - The node host must advertise `system.execApprovals.get/set` (macOS app or headless node host).
-- Approvals files are stored per host at `~/.clawdbot/exec-approvals.json`.
+- Approvals files are stored per host at `~/.openclaw/exec-approvals.json`.

package/docs/cli/browser.md

@@ -1,14 +1,14 @@
 ---
-summary: "CLI reference for `moltbot browser` (profiles, tabs, actions, extension relay)"
+summary: "CLI reference for `openclaw browser` (profiles, tabs, actions, extension relay)"
 read_when:
-  - You use `moltbot browser` and want examples for common tasks
+  - You use `openclaw browser` and want examples for common tasks
   - You want to control a browser running on another machine via a node host
   - You want to use the Chrome extension relay (attach/detach via toolbar button)
 ---
 
-# `moltbot browser`
+# `openclaw browser`
 
-Manage Moltbot’s browser control server and run browser actions (tabs, snapshots, screenshots, navigation, clicks, typing).
+Manage OpenClaw’s browser control server and run browser actions (tabs, snapshots, screenshots, navigation, clicks, typing).
 
 Related:
 - Browser tool + API: [Browser tool](/tools/browser)
@@ -25,37 +25,37 @@ Related:
 ## Quick start (local)
 
 ```bash
-moltbot browser --browser-profile chrome tabs
-moltbot browser --browser-profile clawd start
-moltbot browser --browser-profile clawd open https://example.com
-moltbot browser --browser-profile clawd snapshot
+openclaw browser --browser-profile chrome tabs
+openclaw browser --browser-profile openclaw start
+openclaw browser --browser-profile openclaw open https://example.com
+openclaw browser --browser-profile openclaw snapshot
 ```
 
 ## Profiles
 
 Profiles are named browser routing configs. In practice:
-- `clawd`: launches/attaches to a dedicated Moltbot-managed Chrome instance (isolated user data dir).
+- `openclaw`: launches/attaches to a dedicated OpenClaw-managed Chrome instance (isolated user data dir).
 - `chrome`: controls your existing Chrome tab(s) via the Chrome extension relay.
 
 ```bash
-moltbot browser profiles
-moltbot browser create-profile --name work --color "#FF5A36"
-moltbot browser delete-profile --name work
+openclaw browser profiles
+openclaw browser create-profile --name work --color "#FF5A36"
+openclaw browser delete-profile --name work
 ```
 
 Use a specific profile:
 
 ```bash
-moltbot browser --browser-profile work tabs
+openclaw browser --browser-profile work tabs
 ```
 
 ## Tabs
 
 ```bash
-moltbot browser tabs
-moltbot browser open https://docs.molt.bot
-moltbot browser focus <targetId>
-moltbot browser close <targetId>
+openclaw browser tabs
+openclaw browser open https://docs.openclaw.ai
+openclaw browser focus <targetId>
+openclaw browser close <targetId>
 ```
 
 ## Snapshot / screenshot / actions
@@ -63,21 +63,21 @@ moltbot browser close <targetId>
 Snapshot:
 
 ```bash
-moltbot browser snapshot
+openclaw browser snapshot
 ```
 
 Screenshot:
 
 ```bash
-moltbot browser screenshot
+openclaw browser screenshot
 ```
 
 Navigate/click/type (ref-based UI automation):
 
 ```bash
-moltbot browser navigate https://example.com
-moltbot browser click <ref>
-moltbot browser type <ref> "hello"
+openclaw browser navigate https://example.com
+openclaw browser click <ref>
+openclaw browser type <ref> "hello"
 ```
 
 ## Chrome extension relay (attach via toolbar button)
@@ -87,8 +87,8 @@ This mode lets the agent control an existing Chrome tab that you attach manually
 Install the unpacked extension to a stable path:
 
 ```bash
-moltbot browser extension install
-moltbot browser extension path
+openclaw browser extension install
+openclaw browser extension path
 ```
 
 Then Chrome → `chrome://extensions` → enable “Developer mode” → “Load unpacked” → select the printed folder.

package/docs/cli/channels.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot channels` (accounts, status, login/logout, logs)"
+summary: "CLI reference for `openclaw channels` (accounts, status, login/logout, logs)"
 read_when:
   - You want to add/remove channel accounts (WhatsApp/Telegram/Discord/Google Chat/Slack/Mattermost (plugin)/Signal/iMessage)
   - You want to check channel status or tail channel logs
 ---
 
-# `moltbot channels`
+# `openclaw channels`
 
 Manage chat channel accounts and their runtime status on the Gateway.
 
@@ -16,43 +16,43 @@ Related docs:
 ## Common commands
 
 ```bash
-moltbot channels list
-moltbot channels status
-moltbot channels capabilities
-moltbot channels capabilities --channel discord --target channel:123
-moltbot channels resolve --channel slack "#general" "@jane"
-moltbot channels logs --channel all
+openclaw channels list
+openclaw channels status
+openclaw channels capabilities
+openclaw channels capabilities --channel discord --target channel:123
+openclaw channels resolve --channel slack "#general" "@jane"
+openclaw channels logs --channel all
 ```
 
 ## Add / remove accounts
 
 ```bash
-moltbot channels add --channel telegram --token <bot-token>
-moltbot channels remove --channel telegram --delete
+openclaw channels add --channel telegram --token <bot-token>
+openclaw channels remove --channel telegram --delete
 ```
 
-Tip: `moltbot channels add --help` shows per-channel flags (token, app token, signal-cli paths, etc).
+Tip: `openclaw channels add --help` shows per-channel flags (token, app token, signal-cli paths, etc).
 
 ## Login / logout (interactive)
 
 ```bash
-moltbot channels login --channel whatsapp
-moltbot channels logout --channel whatsapp
+openclaw channels login --channel whatsapp
+openclaw channels logout --channel whatsapp
 ```
 
 ## Troubleshooting
 
-- Run `moltbot status --deep` for a broad probe.
-- Use `moltbot doctor` for guided fixes.
-- `moltbot channels list` prints `Claude: HTTP 403 ... user:profile` → usage snapshot needs the `user:profile` scope. Use `--no-usage`, or provide a claude.ai session key (`CLAUDE_WEB_SESSION_KEY` / `CLAUDE_WEB_COOKIE`), or re-auth via Claude Code CLI.
+- Run `openclaw status --deep` for a broad probe.
+- Use `openclaw doctor` for guided fixes.
+- `openclaw channels list` prints `Claude: HTTP 403 ... user:profile` → usage snapshot needs the `user:profile` scope. Use `--no-usage`, or provide a claude.ai session key (`CLAUDE_WEB_SESSION_KEY` / `CLAUDE_WEB_COOKIE`), or re-auth via Claude Code CLI.
 
 ## Capabilities probe
 
 Fetch provider capability hints (intents/scopes where available) plus static feature support:
 
 ```bash
-moltbot channels capabilities
-moltbot channels capabilities --channel discord --target channel:123
+openclaw channels capabilities
+openclaw channels capabilities --channel discord --target channel:123
 ```
 
 Notes:
@@ -65,9 +65,9 @@ Notes:
 Resolve channel/user names to IDs using the provider directory:
 
 ```bash
-moltbot channels resolve --channel slack "#general" "@jane"
-moltbot channels resolve --channel discord "My Server/#support" "@someone"
-moltbot channels resolve --channel matrix "Project Room"
+openclaw channels resolve --channel slack "#general" "@jane"
+openclaw channels resolve --channel discord "My Server/#support" "@someone"
+openclaw channels resolve --channel matrix "Project Room"
 ```
 
 Notes:

package/docs/cli/config.md

@@ -1,22 +1,22 @@
 ---
-summary: "CLI reference for `moltbot config` (get/set/unset config values)"
+summary: "CLI reference for `openclaw config` (get/set/unset config values)"
 read_when:
   - You want to read or edit config non-interactively
 ---
 
-# `moltbot config`
+# `openclaw config`
 
 Config helpers: get/set/unset values by path. Run without a subcommand to open
-the configure wizard (same as `moltbot configure`).
+the configure wizard (same as `openclaw configure`).
 
 ## Examples
 
 ```bash
-moltbot config get browser.executablePath
-moltbot config set browser.executablePath "/usr/bin/google-chrome"
-moltbot config set agents.defaults.heartbeat.every "2h"
-moltbot config set agents.list[0].tools.exec.node "node-id-or-name"
-moltbot config unset tools.web.search.apiKey
+openclaw config get browser.executablePath
+openclaw config set browser.executablePath "/usr/bin/google-chrome"
+openclaw config set agents.defaults.heartbeat.every "2h"
+openclaw config set agents.list[0].tools.exec.node "node-id-or-name"
+openclaw config unset tools.web.search.apiKey
 ```
 
 ## Paths
@@ -24,15 +24,15 @@ moltbot config unset tools.web.search.apiKey
 Paths use dot or bracket notation:
 
 ```bash
-moltbot config get agents.defaults.workspace
-moltbot config get agents.list[0].id
+openclaw config get agents.defaults.workspace
+openclaw config get agents.list[0].id
 ```
 
 Use the agent list index to target a specific agent:
 
 ```bash
-moltbot config get agents.list
-moltbot config set agents.list[1].tools.exec.node "node-id-or-name"
+openclaw config get agents.list
+openclaw config set agents.list[1].tools.exec.node "node-id-or-name"
 ```
 
 ## Values
@@ -41,9 +41,9 @@ Values are parsed as JSON5 when possible; otherwise they are treated as strings.
 Use `--json` to require JSON5 parsing.
 
 ```bash
-moltbot config set agents.defaults.heartbeat.every "0m"
-moltbot config set gateway.port 19001 --json
-moltbot config set channels.whatsapp.groups '["*"]' --json
+openclaw config set agents.defaults.heartbeat.every "0m"
+openclaw config set gateway.port 19001 --json
+openclaw config set channels.whatsapp.groups '["*"]' --json
 ```
 
 Restart the gateway after edits.

package/docs/cli/configure.md

@@ -1,18 +1,18 @@
 ---
-summary: "CLI reference for `moltbot configure` (interactive configuration prompts)"
+summary: "CLI reference for `openclaw configure` (interactive configuration prompts)"
 read_when:
   - You want to tweak credentials, devices, or agent defaults interactively
 ---
 
-# `moltbot configure`
+# `openclaw configure`
 
 Interactive prompt to set up credentials, devices, and agent defaults.
 
 Note: The **Model** section now includes a multi-select for the
 `agents.defaults.models` allowlist (what shows up in `/model` and the model picker).
 
-Tip: `moltbot config` without a subcommand opens the same wizard. Use
-`moltbot config get|set|unset` for non-interactive edits.
+Tip: `openclaw config` without a subcommand opens the same wizard. Use
+`openclaw config get|set|unset` for non-interactive edits.
 
 Related:
 - Gateway configuration reference: [Configuration](/gateway/configuration)
@@ -25,6 +25,6 @@ Notes:
 ## Examples
 
 ```bash
-moltbot configure
-moltbot configure --section models --section channels
+openclaw configure
+openclaw configure --section models --section channels
 ```

package/docs/cli/cron.md

@@ -1,29 +1,29 @@
 ---
-summary: "CLI reference for `moltbot cron` (schedule and run background jobs)"
+summary: "CLI reference for `openclaw cron` (schedule and run background jobs)"
 read_when:
   - You want scheduled jobs and wakeups
   - You’re debugging cron execution and logs
 ---
 
-# `moltbot cron`
+# `openclaw cron`
 
 Manage cron jobs for the Gateway scheduler.
 
 Related:
 - Cron jobs: [Cron jobs](/automation/cron-jobs)
 
-Tip: run `moltbot cron --help` for the full command surface.
+Tip: run `openclaw cron --help` for the full command surface.
 
 ## Common edits
 
 Update delivery settings without changing the message:
 
 ```bash
-moltbot cron edit <job-id> --deliver --channel telegram --to "123456789"
+openclaw cron edit <job-id> --deliver --channel telegram --to "123456789"
 ```
 
 Disable delivery for an isolated job:
 
 ```bash
-moltbot cron edit <job-id> --no-deliver
+openclaw cron edit <job-id> --no-deliver
 ```

package/docs/cli/dashboard.md

@@ -1,16 +1,16 @@
 ---
-summary: "CLI reference for `moltbot dashboard` (open the Control UI)"
+summary: "CLI reference for `openclaw dashboard` (open the Control UI)"
 read_when:
   - You want to open the Control UI with your current token
   - You want to print the URL without launching a browser
 ---
 
-# `moltbot dashboard`
+# `openclaw dashboard`
 
 Open the Control UI using your current auth.
 
 ```bash
-moltbot dashboard
-moltbot dashboard --no-open
+openclaw dashboard
+openclaw dashboard --no-open
 ```
 

package/docs/cli/devices.md

@@ -1,55 +1,55 @@
 ---
-summary: "CLI reference for `moltbot devices` (device pairing + token rotation/revocation)"
+summary: "CLI reference for `openclaw devices` (device pairing + token rotation/revocation)"
 read_when:
   - You are approving device pairing requests
   - You need to rotate or revoke device tokens
 ---
 
-# `moltbot devices`
+# `openclaw devices`
 
 Manage device pairing requests and device-scoped tokens.
 
 ## Commands
 
-### `moltbot devices list`
+### `openclaw devices list`
 
 List pending pairing requests and paired devices.
 
 ```
-moltbot devices list
-moltbot devices list --json
+openclaw devices list
+openclaw devices list --json
 ```
 
-### `moltbot devices approve <requestId>`
+### `openclaw devices approve <requestId>`
 
 Approve a pending device pairing request.
 
 ```
-moltbot devices approve <requestId>
+openclaw devices approve <requestId>
 ```
 
-### `moltbot devices reject <requestId>`
+### `openclaw devices reject <requestId>`
 
 Reject a pending device pairing request.
 
 ```
-moltbot devices reject <requestId>
+openclaw devices reject <requestId>
 ```
 
-### `moltbot devices rotate --device <id> --role <role> [--scope <scope...>]`
+### `openclaw devices rotate --device <id> --role <role> [--scope <scope...>]`
 
 Rotate a device token for a specific role (optionally updating scopes).
 
 ```
-moltbot devices rotate --device <deviceId> --role operator --scope operator.read --scope operator.write
+openclaw devices rotate --device <deviceId> --role operator --scope operator.read --scope operator.write
 ```
 
-### `moltbot devices revoke --device <id> --role <role>`
+### `openclaw devices revoke --device <id> --role <role>`
 
 Revoke a device token for a specific role.
 
 ```
-moltbot devices revoke --device <deviceId> --role node
+openclaw devices revoke --device <deviceId> --role node
 ```
 
 ## Common options

package/docs/cli/directory.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot directory` (self, peers, groups)"
+summary: "CLI reference for `openclaw directory` (self, peers, groups)"
 read_when:
   - You want to look up contacts/groups/self ids for a channel
   - You are developing a channel directory adapter
 ---
 
-# `moltbot directory`
+# `openclaw directory`
 
 Directory lookups for channels that support it (contacts/peers, groups, and “me”).
 
@@ -15,15 +15,15 @@ Directory lookups for channels that support it (contacts/peers, groups, and “m
 - `--json`: output JSON
 
 ## Notes
-- `directory` is meant to help you find IDs you can paste into other commands (especially `moltbot message send --target ...`).
+- `directory` is meant to help you find IDs you can paste into other commands (especially `openclaw message send --target ...`).
 - For many channels, results are config-backed (allowlists / configured groups) rather than a live provider directory.
 - Default output is `id` (and sometimes `name`) separated by a tab; use `--json` for scripting.
 
 ## Using results with `message send`
 
 ```bash
-moltbot directory peers list --channel slack --query "U0"
-moltbot message send --channel slack --target user:U012ABCDEF --message "hello"
+openclaw directory peers list --channel slack --query "U0"
+openclaw message send --channel slack --target user:U012ABCDEF --message "hello"
 ```
 
 ## ID formats (by channel)
@@ -40,21 +40,21 @@ moltbot message send --channel slack --target user:U012ABCDEF --message "hello"
 ## Self (“me”)
 
 ```bash
-moltbot directory self --channel zalouser
+openclaw directory self --channel zalouser
 ```
 
 ## Peers (contacts/users)
 
 ```bash
-moltbot directory peers list --channel zalouser
-moltbot directory peers list --channel zalouser --query "name"
-moltbot directory peers list --channel zalouser --limit 50
+openclaw directory peers list --channel zalouser
+openclaw directory peers list --channel zalouser --query "name"
+openclaw directory peers list --channel zalouser --limit 50
 ```
 
 ## Groups
 
 ```bash
-moltbot directory groups list --channel zalouser
-moltbot directory groups list --channel zalouser --query "work"
-moltbot directory groups members --channel zalouser --group-id <id>
+openclaw directory groups list --channel zalouser
+openclaw directory groups list --channel zalouser --query "work"
+openclaw directory groups members --channel zalouser --group-id <id>
 ```

package/docs/cli/dns.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot dns` (wide-area discovery helpers)"
+summary: "CLI reference for `openclaw dns` (wide-area discovery helpers)"
 read_when:
   - You want wide-area discovery (DNS-SD) via Tailscale + CoreDNS
-  - You’re setting up split DNS for moltbot.internal
+  - You’re setting up split DNS for a custom discovery domain (example: openclaw.internal)
 ---
 
-# `moltbot dns`
+# `openclaw dns`
 
 DNS helpers for wide-area discovery (Tailscale + CoreDNS). Currently focused on macOS + Homebrew CoreDNS.
 
@@ -16,7 +16,6 @@ Related:
 ## Setup
 
 ```bash
-moltbot dns setup
-moltbot dns setup --apply
+openclaw dns setup
+openclaw dns setup --apply
 ```
-

package/docs/cli/docs.md

@@ -1,15 +1,15 @@
 ---
-summary: "CLI reference for `moltbot docs` (search the live docs index)"
+summary: "CLI reference for `openclaw docs` (search the live docs index)"
 read_when:
-  - You want to search the live Moltbot docs from the terminal
+  - You want to search the live OpenClaw docs from the terminal
 ---
 
-# `moltbot docs`
+# `openclaw docs`
 
 Search the live docs index.
 
 ```bash
-moltbot docs browser extension
-moltbot docs sandbox allowHostControl
+openclaw docs browser extension
+openclaw docs sandbox allowHostControl
 ```
 

package/docs/cli/doctor.md

@@ -1,11 +1,11 @@
 ---
-summary: "CLI reference for `moltbot doctor` (health checks + guided repairs)"
+summary: "CLI reference for `openclaw doctor` (health checks + guided repairs)"
 read_when:
   - You have connectivity/auth issues and want guided fixes
   - You updated and want a sanity check
 ---
 
-# `moltbot doctor`
+# `openclaw doctor`
 
 Health checks + quick fixes for the gateway and channels.
 
@@ -16,23 +16,23 @@ Related:
 ## Examples
 
 ```bash
-moltbot doctor
-moltbot doctor --repair
-moltbot doctor --deep
+openclaw doctor
+openclaw doctor --repair
+openclaw doctor --deep
 ```
 
 Notes:
 - Interactive prompts (like keychain/OAuth fixes) only run when stdin is a TTY and `--non-interactive` is **not** set. Headless runs (cron, Telegram, no terminal) will skip prompts.
-- `--fix` (alias for `--repair`) writes a backup to `~/.clawdbot/moltbot.json.bak` and drops unknown config keys, listing each removal.
+- `--fix` (alias for `--repair`) writes a backup to `~/.openclaw/openclaw.json.bak` and drops unknown config keys, listing each removal.
 
 ## macOS: `launchctl` env overrides
 
-If you previously ran `launchctl setenv CLAWDBOT_GATEWAY_TOKEN ...` (or `...PASSWORD`), that value overrides your config file and can cause persistent “unauthorized” errors.
+If you previously ran `launchctl setenv OPENCLAW_GATEWAY_TOKEN ...` (or `...PASSWORD`), that value overrides your config file and can cause persistent “unauthorized” errors.
 
 ```bash
-launchctl getenv CLAWDBOT_GATEWAY_TOKEN
-launchctl getenv CLAWDBOT_GATEWAY_PASSWORD
+launchctl getenv OPENCLAW_GATEWAY_TOKEN
+launchctl getenv OPENCLAW_GATEWAY_PASSWORD
 
-launchctl unsetenv CLAWDBOT_GATEWAY_TOKEN
-launchctl unsetenv CLAWDBOT_GATEWAY_PASSWORD
+launchctl unsetenv OPENCLAW_GATEWAY_TOKEN
+launchctl unsetenv OPENCLAW_GATEWAY_PASSWORD
 ```