@garygentry/feature-forge 0.3.1 → 0.3.4

package/adapters/gemini/skills/forge-3-specs/forge-3-specs.md

@@ -20,6 +20,8 @@ Read and follow `references/shared-conventions.md` for feature name validation,
 
 **Prerequisite check:** Read `{resolvedFeatureDir}/.pipeline-state.json`. If not in force mode, both `forge-1-prd` and `forge-2-tech` must be `complete`. If not, STOP and tell the user which prerequisites are missing.
 
+**Carried-over note check.** If that state's top-level `notes` is a non-empty string, surface it verbatim before proceeding and treat it as input to this stage — it was persisted for exactly this cross-session handoff (often at the previous stage's exit). It never overrides the PRD, tech spec, or config; raise any conflict instead of silently following either side.
+
 After the prerequisite check, invoke the **Stage-Entry Guard** block in `references/shared-conventions.md` with `{stage}` = `forge-3-specs`. Because this stage writes a suite incrementally, the guard's **interrupted** arm uses the `stages.forge-3-specs.artifacts` array (already updated after each spec file — Step 3) to resume from the first unwritten document rather than regenerating the whole suite.
 
 Read both `{resolvedFeatureDir}/PRD.md` and `{resolvedFeatureDir}/tech-spec.md` into context.
@@ -138,6 +140,8 @@ List any gaps or inconsistencies found and resolve them.
 
 ## Step 6: Review with User
 
+This is a **blocking review** — per the **Stage Review Gate** in `references/shared-conventions.md`, do not proceed until the user confirms.
+
 Present a summary of all documents created as text, with key decisions highlighted. Then use the host's question mechanism to collect feedback — do NOT include these questions in your text output:
 
 "1. Does the level of detail match what you need? 2. Any areas that need more depth? 3. Any missing subsystems or concerns?"
@@ -147,7 +151,7 @@ Present a summary of all documents created as text, with key decisions highlight
 Pipeline state is written by the `state-*` verbs — see the Pipeline State Protocol in `references/shared-conventions.md`.
 
 1. Record completion by running `state-complete` (below) with `--version`, one `--artifact` per created file including `TRACEABILITY.md`, and `--based-on forge-1-prd=<current version> --based-on forge-2-tech=<current version>`. It sets `status: "complete"`, `completedAt`, the version and `basedOnVersions`, and applies the downstream staleness cascade deterministically, so no downstream status is set by hand.
-2. **Offer a note — don't force one.** As a statement (not a blocking question), let the user know they can jot anything worth preserving across sessions and you'll store it in the `notes` field. If they volunteer something, store it; otherwise proceed.
+2. **Offer a note — don't force one.** As a statement (not a blocking question), let the user know they can jot anything worth preserving across sessions and you'll store it in the `notes` field. If they volunteer something, store it via `state-note` — it **overwrites** the single `notes` string (latest note wins), so fold any still-relevant existing note into the one combined string; otherwise proceed. The next stage's Step 1 reads and surfaces this note.
 3. If `gitCommitAfterStage` is true, follow the Git Commit Protocol in `references/shared-conventions.md`: stage files, attempt commit with message `"{commitPrefix}({feature}): complete implementation specs v{n}"` (marking `stages.forge-3-specs.status` `complete` with `commitHash: null` in that commit), then record the artifact-commit hash via the protocol's two-commit follow-up (never `--amend`) only on success. If commit fails, leave status as `in-progress`.
 4. **Close with the Stage Exit Protocol** (single-sourced in `references/stage-exit-protocol.md`; do not improvise a "Next steps" list). Specs feed every downstream stage, so the verify gate matters here:
 
@@ -165,15 +169,17 @@ python3 "$R/scripts/forge-session.py" state-note \
   --feature "{feature}" --note "<what the user volunteered>" --specs-dir "{specsDir}"
 ```
 
+**Determine `--verify-capability` before running the exit** (full rule: `references/stage-exit-protocol.md`; summary: **Verify Capability** in `references/shared-conventions.md`). Pass `interactive` only when a question mechanism equivalent to the host's question mechanism is available **and** a clean-room `forge-verifier` may be dispatched; otherwise pass `manual`. Dispatch capability means **permitted** dispatch, not a listed tool — the test is "may I dispatch `forge-verifier` right now", not "is a dispatch tool in my tool surface". A session that bars *unsolicited* dispatch while offering a question mechanism is therefore **`interactive`, not `manual`**: the gate's affirmative choice is the user request that authorizes the dispatch. Such a bar is never grounds to skip verification, and never grounds to fence the production successor while verification is unresolved — on the `runInStageVerify: true` path the emitted `verifyGate` stays `none`, so reuse the Standard Verify Gate block for consent with **choice 2 omitted**, leaving exactly two choices: *Verify now* (recommended) and *Skip for now*. The clean-room `forge-verifier` is **dispatched on the affirmative choice**, never merely printed for the user to run later; *Skip for now* is persisted as an explicit `skipped` before any advancing block. Add `--epic "{epic}"` to the call below when this feature is an epic member.
+
 **Close this stage with the Scripted Stage Exit** (contract: `references/stage-exit-protocol.md`; do not improvise a "Next steps" list). Run:
 
 ```bash
 R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
-python3 "$R/scripts/forge-session.py" stage-exit --feature "{feature}" --stage forge-3-specs --specs-dir "{specsDir}" --host generic
+python3 "$R/scripts/forge-session.py" stage-exit --feature "{feature}" --stage forge-3-specs --specs-dir "{specsDir}" --host generic --verify-capability "{verify-capability}"
 ```
 
-Obey the DIRECTIVES it prints, in order, per the directive contract: `runInStageVerify: true` → dispatch the in-stage clean-room verify now (honoring `autoFixEligible`); `verifyGate: "standard"` → present the Standard Verify Gate; `verifyGate: "manual-print"` → print the `verifyCommand` for the user; non-empty `invalidAutoVerifyKeys` → print a one-line warning. Then **print the NEXT-STEPS block verbatim as your absolute last output — nothing after its sentinel line.**
+Obey the DIRECTIVES it prints, in the consumption order this protocol fixes: surface `invalidAutoVerifyKeys` and every `warnings` entry first; `runInStageVerify: true` → run the in-stage clean-room verify chain now (honoring `autoFixEligible`, and asking through the Standard Verify Gate first when you may not dispatch unsolicited); `verifyGate: "standard"` → present the Standard Verify Gate; `verifyGate: "manual-print"` → print the `verifyCommand` for the user and do **not** dispatch inline. Then, and only when `terminalOwnedBy` is `"self"`, **print the NEXT-STEPS block verbatim as your absolute last output — nothing after its sentinel line.** A `terminalOwnedBy: "outer"` payload carries `nextSteps: null`: return your structured result to the caller and print no terminal block at all.
 
 ## Gotchas
 

package/adapters/gemini/skills/forge-3-specs/references/shared-conventions.md

@@ -15,11 +15,11 @@ If no feature name is provided:
 
 ## User Input Protocol
 
-### CRITICAL GUARDRAIL: Use AskUserQuestion for All Questions
+### CRITICAL GUARDRAIL: Use the host's question mechanism for All Questions
 
-You MUST use the `AskUserQuestion` tool whenever you need the user's input before proceeding. This includes yes/no confirmations, choices between options, interview questions, and feedback on artifacts. NEVER output questions as inline prose text — the user may not be prompted and the session will stall.
+You MUST use the host's question mechanism whenever you need the user's input before proceeding. This includes yes/no confirmations, choices between options, interview questions, and feedback on artifacts. NEVER output questions as inline prose text — the user may not be prompted and the session will stall.
 
-**Required turn structure:** Output your analysis, findings, or context as regular text. Then call `AskUserQuestion` with your questions. Do NOT mix questions into your text output.
+**Required turn structure:** Output your analysis, findings, or context as regular text. Then call the host's question mechanism with your questions. Do NOT mix questions into your text output.
 
 **WRONG — questions as inline prose (causes stalling):**
 ```
@@ -31,14 +31,14 @@ I found that the codebase uses React and TanStack Router. Here are my questions:
 **RIGHT — context as text, questions via tool:**
 ```
 I found that the codebase uses React and TanStack Router.
-[then call AskUserQuestion with: "1. Where should this component live? 2. Should we use server-side rendering?"]
+[then call the host's question mechanism with: "1. Where should this component live? 2. Should we use server-side rendering?"]
 ```
 
 ### Decision Support: Help the User Choose
 
-When an `AskUserQuestion` carries substantive options (a real choice — not a trivial yes/no confirmation), do not just list them. The interview stages have already done codebase research and integration analysis; surfacing that synthesis at the decision moment is the whole point. For every such question:
+When a question posed through the host's question mechanism carries substantive options (a real choice — not a trivial yes/no confirmation), do not just list them. The interview stages have already done codebase research and integration analysis; surfacing that synthesis at the decision moment is the whole point. For every such question:
 
-- **Lead with a recommended option.** Place it first and label it `(recommended)` (matching the `AskUserQuestion` "(Recommended)" convention).
+- **Lead with a recommended option.** Place it first and label it `(recommended)` (matching the host's question mechanism "(Recommended)" convention).
 - **Put the trade-off in each option's `description`.** Say why you'd pick it and what you give up versus the alternatives — the cost, not just the benefit.
 - **State a one-line rationale** in the text before the question for *why* the recommendation wins.
 
@@ -49,10 +49,21 @@ Two modes, and make clear which one you're in:
 
 **The only thing to avoid is false confidence** — recommending as if evidence-backed when it's really preference. Never respond to the absence of a clear winner by going silent: a defaulted recommendation with honest trade-offs always beats a neutral option dump.
 
-For genuinely comparable artifacts (competing module structures, two code snippets, layout variants), use the `AskUserQuestion` `preview` field to show them side-by-side.
+For genuinely comparable artifacts (competing module structures, two code snippets, layout variants), use the host's question mechanism `preview` field to show them side-by-side.
 
 The **Branch Setup** block below is the reference pattern: a strong recommendation as the first option, rationale inline, the alternative still available, never a hard-stop.
 
+## Stage Review Gate
+
+Every authoring stage ends its "Review with User" step in exactly one of two shapes. Which shape a stage uses is declared **here, once** — each stage's review step points at this block by title, and the shape is never re-derived from the surrounding prose or inferred from how sibling stages behave (three stages block and one does not; majority-shape inference is precisely the failure this block exists to prevent):
+
+- **Blocking review (gate).** The stage presents the artifact and collects feedback through the host's question mechanism; it does **not** proceed until the user answers, iterating until they confirm. Stages: **forge-1-prd** (Step 5), **forge-2-tech** (Step 6), **forge-3-specs** (Step 6).
+- **Non-blocking review (invitation).** The stage states the artifact is ready and invites adjustments **as a statement, not a question** — and then **proceeds to the next step in the same turn unless the user asks for changes**. The invitation obliges the agent to *continue*: emitting the invitation sentence and stopping treats the non-gate as a gate and strands the stage `in-progress` with its completion step unrun — a defect, not caution. Stage: **forge-4-backlog** (Step 6).
+
+**Why the shapes differ.** A blocking review guards an artifact whose content was just authored from open-ended interview or synthesis — the user is the only authority on "complete", so the stage must wait. forge-4's backlog is *derived* from specs the user already approved, was planned interactively in its Step 3, and is machine-validated in its Step 5; a second hard gate would re-ask a settled question, and the loop never launches without forge-5-loop's own Step 2d confirmation anyway. The invitation is a courtesy checkpoint, not an approval gate (removed deliberately in #78's consistency sweep).
+
+A stage that changes shape changes it **in this block first**; the per-stage pointer stays a pointer.
+
 ## Configuration Reading
 
 Read `forge.config.json` from the project root. If it doesn't exist, use defaults.
@@ -68,10 +79,10 @@ Extract these config values (use defaults if not present):
 - `branchPerFeature` (default: true)
 - `branchPrefix` (default: `forge/`)
 - `loopIterationMultiplier` (default: `1.5`)
-- `autoInvokeNextStage` (default: `true` — the `/feature-forge:forge` navigator auto-invokes the next stage via the `Skill` tool after the user confirms; `false` keeps copy-paste behavior. Navigator-only.)
+- `autoInvokeNextStage` (default: `true` — the `/feature-forge:forge` navigator auto-invokes the next stage via the host's skill-invocation mechanism after the user confirms; `false` keeps copy-paste behavior. Navigator-only.)
 - `contextWindowTokens` (default: `null` — context window used by the navigator's context-usage check; `null` infers from the session model and falls back to 200000. Set to the model's window, e.g. `1000000` on a 1M model. Navigator-only.)
 - `contextWarnThreshold` (default: `0.7` — fraction of the window past which the navigator recommends a clean session. Navigator-only.)
-- `autoVerify` (default: `false` — when `true`, `forge-verify` runs automatically after a stage completes, no prompt. **In-stage-primary:** the just-completed authoring stage runs it itself, in-session, before the exit block (honoring the verify-before-clear principle). The navigator runs it only as a **catch-up** when verify is still pending (a host that could not dispatch a clean-room subagent, or a stage run before this behavior landed). Either way it runs in a fresh clean-room subagent, so it never needs a `/clear` and costs only a compact digest.)
+- `autoVerify` (default: `false` — when `true`, `forge-verify` runs automatically after a stage completes, no prompt. **In-stage-primary:** the just-completed authoring stage runs it itself, in-session, before the exit block (honoring the verify-before-clear principle). The navigator runs it only as a **catch-up** when verify is still pending (a host that could not dispatch a clean-room subagent, or a stage run before this behavior landed). Either way it runs in a fresh clean-room subagent, so it never needs a session clear and costs only a compact digest.)
 - `autoVerifyStages` (default: `{}` — per-stage overrides for `autoVerify`, e.g. `{"forge-1-prd": false}`. Effective value = `autoVerifyStages[stage]` if present, else `autoVerify`. Keys are constrained to the five verify-capable stages; a typo is a config error surfaced as `invalidAutoVerifyKeys`. Both the in-stage run and the navigator catch-up read this same effective value.)
 - `autoFix` (default: `false` — when `true`, `forge-fix` is chained after an auto-verify that finds issues — by the in-stage run (primary) or the navigator catch-up — but only when auto-verify is on for that stage AND preconditions hold (zero unresolved decisions, clean tree, passing re-verify); otherwise a digest is surfaced and the gate is presented.)
 - `loopRunner` (optional object — the loop runner to drive; **defaults to rauf** when absent, with every command templated. See `references/forge-config-schema.json` and `references/ralph-loop-contract.md`.)
@@ -81,7 +92,7 @@ Extract these config values (use defaults if not present):
 Before any file I/O against a feature's artifacts, resolve its directory through the deterministic helper rather than hardcoding `{specsDir}/{feature}/`. This makes flat (`{specsDir}/{feature}/`) and nested (`{specsDir}/{epic}/{feature}/`) layouts both resolve from a bare feature name (REQ-DIR-03), with standalone features behaving exactly as today.
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 resolvedFeatureDir=$(python3 "$R/scripts/epic-manifest.py" \
   resolve "<feature>" --specs-dir "<specsDir>")
@@ -96,12 +107,12 @@ In both failure cases, do not fall back to a guessed path.
 **On `not-found`, check other branches before stopping.** With `branchPerFeature`, the feature's directory (and its `.pipeline-state.json`) may exist only on its topic branch — invisible from the default branch of a fresh clone. Before concluding the pipeline does not exist, run the read-only cross-branch discovery:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" discover-feature "<feature>" --specs-dir "<specsDir>" --json
 ```
 
-- **Candidates found** (`candidates` and/or `remoteCandidates` non-empty): summarize them as text (branch, recorded stage, whether the state's own `branch` field matches), then use `AskUserQuestion`: **Switch to `{branch}` (recommended)** — run the candidate's `switchCommand` · **Fetch + switch** — for a `needsFetch` remote candidate, run its `fetchCommand` then `switchCommand` (note its contents were matched by name only, not inspected) · **Treat `{feature}` as new on this branch** · **Stop**. A checkout is a mutation inside an otherwise read-only flow: perform it ONLY on the user's explicit accept AND with a clean working tree (`git status --porcelain` prints nothing) — never auto-switch, never with uncommitted changes. After a successful switch, re-run this Feature Directory Resolution block from the top.
+- **Candidates found** (`candidates` and/or `remoteCandidates` non-empty): summarize them as text (branch, recorded stage, whether the state's own `branch` field matches), then use the host's question mechanism: **Switch to `{branch}` (recommended)** — run the candidate's `switchCommand` · **Fetch + switch** — for a `needsFetch` remote candidate, run its `fetchCommand` then `switchCommand` (note its contents were matched by name only, not inspected) · **Treat `{feature}` as new on this branch** · **Stop**. A checkout is a mutation inside an otherwise read-only flow: perform it ONLY on the user's explicit accept AND with a clean working tree (`git status --porcelain` prints nothing) — never auto-switch, never with uncommitted changes. After a successful switch, re-run this Feature Directory Resolution block from the top.
 - **Nothing found** (both lists empty): the pipeline genuinely does not exist anywhere discoverable — STOP and surface the original `not-found` stderr line verbatim (or, where the caller offers to start a new pipeline, offer that).
 
 **Anti-fabrication guard.** Never describe pipeline state that resolution or discovery did not return: if both come back empty, the pipeline does not exist — say exactly that, and never reconstruct stages, backlogs, or history from conversational memory.
@@ -124,16 +135,16 @@ Whenever a stage creates the specs tree for the first time (the first PRD or epi
 Run this after creating the feature/epic directory, before the stage's git commit:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 mkdir -p "<specsDir>"
 [ -f "<specsDir>/AGENTS.md" ] || cp "$R/references/templates/specs-hygiene/AGENTS.md" "<specsDir>/AGENTS.md"
 ```
 
-If the host is Claude (the `AskUserQuestion` tool is available), also ensure the Claude-framed variant:
+If the host is Claude (the Claude-native question tool is available), also ensure the Claude-framed variant:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 [ -f "<specsDir>/CLAUDE.md" ] || cp "$R/references/templates/specs-hygiene/CLAUDE.md" "<specsDir>/CLAUDE.md"
 ```
@@ -153,7 +164,7 @@ After resolving the feature directory, check the feature's `.pipeline-state.json
 To obtain the manifest contracts and the live completion status of each dependency in one deterministic call, run `render-status` and read the per-feature `status` and the `consumes`/`exposes` arrays rather than re-deriving them:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/epic-manifest.py" \
   render-status "<epic>" --specs-dir "<specsDir>" --json
@@ -168,7 +179,7 @@ If `render-status` fails, proceed with **only** EPIC.md + charter (a corrupt man
 Defense-in-depth for the split-brain-epic failure (Issue #125). Invoke this block in the authoring stages (`forge-1-prd`..`forge-4-backlog`) once the feature has resolved — right after **Epic Context Injection** for the stages that run it (`forge-1-prd`..`forge-3-specs`), and right after **Feature Directory Resolution** for `forge-4-backlog`. It confirms that a **resolved nested epic member** actually sits on a branch that contains the epic's manifest. Without this, a member reached from a branch cut *before* the epic-manifest commit (or that otherwise lacks it) would author specs against an epic decomposition that is not present — the exact drift that produces a disjoint, split-brain member. **Skip if not a git repo or `branchPerFeature` is false.**
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" check-epic-base --feature "{feature}" --specs-dir "{specsDir}" --json
 ```
@@ -191,6 +202,44 @@ Pipeline state is written by the `state-*` verbs of `scripts/forge-session.py`
 
 If a `state-*` verb exits 2, surface the plain `Error:` line from stderr verbatim, do **not** proceed to the next step of the surrounding protocol, and do **not** hand-author the JSON as a workaround. The stage remains resumable because the entry stamp is already on disk — re-run the verb once the cause is fixed.
 
+**The nine `state-*` verbs.** `state-enter` (Stage-Entry Guard), `state-artifact` (incremental artifact tracking), `state-complete` (Git Commit Protocol), `state-skip` (the deliberate forge-6-docs documentation skip — scoped to that one stage; writes `status: "skipped"` + `skippedAt`, refuses to erase a record of docs that exist, and is the only sanctioned writer of a skipped docs stage), `state-branch` (Branch Setup and Branch Reconciliation), `state-note` (the Immediate Downstream Note below, and the optional completion note at stage closure), `state-decision` (deferred decisions), `state-ecr` (epic change requests), and `state-verify` (one `forge-verify-*` verification transition — below). The `--epic` member requirement and the exit-2 failure protocol above apply to **every** one of them, `state-verify` included; no verify entry is ever hand-authored.
+
+### `state-verify` — verification results and provenance
+
+`state-verify` writes exactly one `stages.forge-verify-{token}` entry — the verification result for the production stage named by `--stage` — plus the top-level `updatedAt`, and nothing else. `--stage` takes the **served production stage** (`forge-0-epic` through `forge-5-loop`; `forge-6-docs` has no verification token and is rejected). Add `--epic "{epic}"` when the feature is an epic member — required, per the member rule above. Result mode passes `--status` (`auto-verify-pending`, `passed`, `findings-reported`, `findings-applied`, or `skipped`) with whatever `--findings-file`, `--findings-count`, and `--verified-stage-version` that status requires; contradictory metadata is refused before any write. `passed` may additionally carry `--findings-file` + `--findings-count` together for an **advisory-only** report (`inconsistency`/`improvement` findings only, per forge-verify's severity floor) — the stage resolves without a fix round and the report stays attached:
+
+**`auto-verify-pending` is not a skill-facing status.** It is written by `stage-exit`'s scheduling boundary, which records the debt automatically when auto-verify is effective for a stage. The value is accepted on this CLI so the entry stays inspectable and repairable, not so a skill can hand-schedule verification: no skill body and no reference passes it, and none should. Every other status in the list is the recorded *result* of a verification that ran (or was explicitly skipped); this one records that one was *owed*.
+
+```bash
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+[ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
+python3 "$R/scripts/forge-session.py" state-verify \
+  --feature "{feature}" --stage "{served-production-stage}" --status "<status>" \
+  --specs-dir "{specsDir}"
+```
+
+Provenance follows the same two-commit sequence as `state-complete`: the result transition above writes `commitHash: null`, Commit 1 records the findings document and the state, and a second `state-verify` call records the full 40-hex hash of Commit 1 and touches nothing else (never `--amend`; an abbreviated hash is refused rather than expanded). Add `--epic "{epic}"` for an epic member — required, per the member rule above:
+
+```bash
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+[ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
+python3 "$R/scripts/forge-session.py" state-verify \
+  --feature "{feature}" --stage "{served-production-stage}" \
+  --commit-hash "$(git rev-parse HEAD)" --specs-dir "{specsDir}"
+```
+
+Epic-scoped verification is the single exception to the member rule: with `--stage forge-0-epic`, `--feature` names the **epic** and `--epic` must be absent or exactly equal to it. That call writes `{specsDir}/{epic}/.epic-state.json` and never a member's `.pipeline-state.json`, and its freshness version is the epic manifest's `revision`, never a member's stage version:
+
+```bash
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+[ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
+python3 "$R/scripts/forge-session.py" state-verify \
+  --feature "{epic}" --stage forge-0-epic --status "<status>" \
+  --specs-dir "{specsDir}"
+```
+
+On exit 2 the verification result is **not** recorded: surface the `Error:` line verbatim, name the feature (and epic), and do not claim the verification was persisted or advance past it.
+
 ### Staleness Detection (Read-Time)
 
 When loading upstream artifacts as prerequisites, check `basedOnVersions` in the pipeline state for this stage. If any upstream stage's current version is newer than the version recorded in `basedOnVersions`, warn the user before proceeding:
@@ -199,6 +248,31 @@ When loading upstream artifacts as prerequisites, check `basedOnVersions` in the
 
 Frame the choice with its cost: re-running re-derives this stage from the current upstream (safest, but discards any hand-edits to this stage's artifacts); proceeding stale is faster but risks baking outdated assumptions into everything downstream. Recommend re-running unless the user knows the upstream change doesn't affect this stage.
 
+## Immediate Downstream Note (Parking Lot)
+
+When an interview raises a concern that belongs to a *later stage of this same feature*, acknowledge it and persist it **immediately, at the moment it is raised** — not at stage closure — by running `state-note` with a concise one-line statement of the concern. Add `--epic "{epic}"` when this feature is an epic member — required, per the Pipeline State Protocol above; omitting it for a member is an error and must never be allowed to fall back to a same-named flat feature.
+
+```bash
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+[ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
+python3 "$R/scripts/forge-session.py" state-note \
+  --feature "{feature}" --note "<concise downstream concern>" \
+  --specs-dir "{specsDir}"
+```
+
+`state-note` **overwrites** the single top-level `notes` string — it does not append. To preserve an earlier note, read the current `notes` value out of the feature's `.pipeline-state.json` first and pass one combined concise string in a single `--note`; never edit or round-trip the JSON by hand. This interview-time call is separate from the optional completion note offered at stage closure and must not be deferred until then — a session that ends before closure would otherwise lose the concern entirely.
+
+On `UsageError`/exit 2, surface the `Error:` line verbatim together with the named feature (and epic) and the recovery instruction, and **stop claiming the concern was recorded** — it was not. Epic *decomposition* changes are not notes: they go through `state-ecr` into `epicChangeRequests`, never into `notes`.
+
+## Verify Capability
+
+Skills that close a stage pass `--verify-capability interactive|manual` to `stage-exit`. The full determination rule, the Standard Verify Gate, and the recovery path live in `references/stage-exit-protocol.md`; the two facts that are most often gotten wrong:
+
+- **Dispatch capability is *permitted* dispatch, not a listed tool.** The question is "**may I dispatch `forge-verifier` right now**", not "is a subagent-dispatch tool in my tool surface". A session can carry a standing host instruction against dispatching subagents unless the user asked; such instructions are injected by the harness, sit outside this project's control, and outrank skill prose. Classify on permission, up front.
+- **A consent requirement is `interactive`, not `manual`.** When dispatch is barred only *unless the user asked* and a question mechanism is available, pass `interactive`: the gate's own affirmative choice supplies the missing user request. Pass `manual` only when there is **no** question mechanism **and** **no** permitted dispatch.
+
+A bar on unsolicited dispatch is never grounds to skip verification, and never grounds to fence the production successor while verification is unresolved. On the `runInStageVerify: true` path the emitted `verifyGate` stays `none`: reuse the Standard Verify Gate block for consent with **choice 2 omitted** (auto-verify is already effective, so "enable auto-verify going forward" is a no-op), leaving exactly two choices: *Verify now* (recommended) and *Skip for now*. The clean-room `forge-verifier` is **dispatched on the affirmative choice**, never merely printed for the user to run later; *Skip for now* is persisted as an explicit `skipped` before any advancing block.
+
 ## Branch Setup
 
 Invoke this block at the **very start** of a pipeline entry point — `forge-1-prd` (standalone feature) and `forge-0-epic` (epic) — **before** any directory resolution or interview, so the rest of the run lands on the intended branch. `{label}` is the feature name (forge-1-prd) or epic name (forge-0-epic); `{scope}` is `feature` or `epic` correspondingly.
@@ -212,7 +286,7 @@ Invoke this block at the **very start** of a pipeline entry point — `forge-1-p
 1. Read the current branch: `git rev-parse --abbrev-ref HEAD`.
 2. Determine the default branch: `git symbolic-ref --quiet refs/remotes/origin/HEAD` (strip to the last path segment); if that fails, fall back to `main`, else `master` — whichever the repo has.
 3. **If the current branch is NOT the default branch** (the user is already on a topic/`{branchPrefix}*` branch) → record it (see below) and proceed silently. Do not prompt.
-4. **If the current branch IS the default branch** → use `AskUserQuestion` with a **strong recommendation** (still optional):
+4. **If the current branch IS the default branch** → use the host's question mechanism with a **strong recommendation** (still optional):
 
    > "You're on `{defaultBranch}`. Strongly recommended: create `{branchPrefix}{label}` so this {scope}'s work stays isolated and reviewable as one branch. Create it?"
    > Options: **Create `{branchPrefix}{label}` (recommended)** · **Stay on `{defaultBranch}`**
@@ -223,7 +297,7 @@ Invoke this block at the **very start** of a pipeline entry point — `forge-1-p
 **Record the branch.** After this block resolves, record the resulting branch name in the feature's top-level `branch` field by running `state-branch` (create/update it when the state file is first written for this stage). Emit the call **once the feature directory exists** — i.e. after Feature Directory Resolution and the Entry Stamp, **not** at this block: Branch Setup runs at the very start of the entry point, before any directory resolution, and a brand-new standalone feature may have no directory yet. Add `--epic "{epic}"` to the call when this feature is an epic member — required, per the Pipeline State Protocol.
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" state-branch \
   --feature "{feature}" --branch "<name>" --specs-dir "{specsDir}"
@@ -236,20 +310,20 @@ Downstream stages and `forge-5-loop` read it to detect drift back onto the defau
 The recorded `branch` is a **self-healing hint, not gospel.** A hosted environment (Claude.ai remote, cloud agents) can impose an arbitrary session branch (e.g. `claude/<slug>`) that Branch Setup silently records; the user may then move the work to the intended topic branch, leaving the recorded field stale. Every branch-aware mechanism (the `forge-5-loop` guard, `discover-feature`) keys off that field, so a stale value actively misleads — the loop would offer to switch you *back* to the imposed branch. Invoke this block from `forge-5-loop`'s pre-flight (and any stage that acts on the recorded branch) to reconcile deterministically. Skip if not a git repo or `branchPerFeature` is false.
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" reconcile-branch --feature "{feature}" --specs-dir "{specsDir}" --json
 ```
 
 Act on the emitted `action` (source of truth is where the state actually resolves, not the recorded field):
 - **`adopt-current`** — you are on a non-default topic branch where the state resolves, and the recorded `branch` differs (a stale/imposed value). Run `state-branch` (below) to write `newBranch` into the state `branch` field, with a **visible one-line note** ("recorded branch was `{stateBranch}`; work is on `{currentBranch}` — updating to match") — never silently, and **never push the user back** to the recorded branch (offer that only as a plain alternative).
-- **`warn-drift`** — you are on the **default** branch and the state records a topic branch. Via `AskUserQuestion`, strongly recommend creating/switching to `{branchPrefix}{feature}` (then record it), still allowing **proceed on the default branch**. Never hard-stop.
+- **`warn-drift`** — you are on the **default** branch and the state records a topic branch. Via the host's question mechanism, strongly recommend creating/switching to `{branchPrefix}{feature}` (then record it), still allowing **proceed on the default branch**. Never hard-stop.
 - **`none`** / **`not-resolved`** — nothing to do; proceed.
 
 The `adopt-current` write, with the portable plugin-root prelude. Add `--epic "{epic}"` when this feature is an epic member — required, per the Pipeline State Protocol:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" state-branch \
   --feature "{feature}" --branch "{newBranch}" --specs-dir "{specsDir}"
@@ -275,7 +349,7 @@ When `gitCommitAfterStage` is true, follow this exact order to avoid state incon
 The two `state-complete` calls, with the portable plugin-root prelude. Add `--epic "{epic}"` to each when this feature is an epic member — required, per the Pipeline State Protocol:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 # Commit 1 — before `git commit`
 python3 "$R/scripts/forge-session.py" state-complete \
@@ -297,15 +371,15 @@ Invoke this block at the **start of an authoring stage** (`forge-1-prd`..`forge-
 
 2. **Interrupted** (`status: "in-progress"`) — a previous run of THIS stage was interrupted before it committed (the exit commit is what flips it to `complete`, so `in-progress` on entry always means a crash/abandon). Do **not** silently re-author. Instead:
    - **Inventory on-disk artifacts:** list the files this stage produces that already exist in `{resolvedFeatureDir}/` (e.g. `PRD.md`; `tech-spec.md`; the `##-*.md` suite + `TRACEABILITY.md`; `backlog.json`), and cross-check against the `stages.{stage}.artifacts` array (written incrementally during the previous run).
-   - **Gate via `AskUserQuestion`** (Decision Support protocol): present the inventory as text, then ask "This {stage} run was interrupted — {N} artifact(s) from the previous run are on disk: {list}. Resume the in-progress draft, or start a new version from scratch?" Options: **Resume (recommended)** — continue from the first artifact not yet written/complete, reusing the existing files; do **not** re-stamp or bump the version. · **Start a new version** — treat it as a fresh authoring pass (proceed to the Entry Stamp; the version increments at exit).
+   - **Gate via the host's question mechanism** (Decision Support protocol): present the inventory as text, then ask "This {stage} run was interrupted — {N} artifact(s) from the previous run are on disk: {list}. Resume the in-progress draft, or start a new version from scratch?" Options: **Resume (recommended)** — continue from the first artifact not yet written/complete, reusing the existing files; do **not** re-stamp or bump the version. · **Start a new version** — treat it as a fresh authoring pass (proceed to the Entry Stamp; the version increments at exit).
    - Skip artifact regeneration for files that already exist and are complete (non-empty, properly structured); continue from the next unwritten artifact.
 
-3. **Re-authoring** (`status: "complete"` or `"stale"`) — a finished draft exists. Warn via `AskUserQuestion` before overwriting: "A completed {stage} artifact already exists for '{feature}' (v{n}{, marked stale}). Continuing will create a new version. Proceed?" On confirm, proceed to the Entry Stamp and author a new version (the version increments at exit, per that stage's Update-Pipeline-State step).
+3. **Re-authoring** (`status: "complete"` or `"stale"`) — a finished draft exists. Warn via the host's question mechanism before overwriting: "A completed {stage} artifact already exists for '{feature}' (v{n}{, marked stale}). Continuing will create a new version. Proceed?" On confirm, proceed to the Entry Stamp and author a new version (the version increments at exit, per that stage's Update-Pipeline-State step).
 
 **Entry Stamp** (fresh, restart, and re-author paths — NOT the resume path). Before authoring, record the entry stamp by running `state-enter` — one atomic write that sets `stages.{stage}.status` → `"in-progress"`, `stages.{stage}.startedAt` → current ISO-8601 UTC timestamp, top-level `currentStage` → `"{stage}"` (where the pipeline IS, per O1), and refreshes `updatedAt`. Add `--epic "{epic}"` when this feature is an epic member — required, per the Pipeline State Protocol:
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" state-enter \
   --feature "{feature}" --stage "{stage}" --specs-dir "{specsDir}"
@@ -318,7 +392,7 @@ This write is **left uncommitted**: it is staged and committed as part of this s
 **Incremental artifact tracking:** When a stage writes multiple files (e.g. forge-3-specs writing a suite of spec documents), run `state-artifact --feature {feature} --stage {stage} --path <file>` after writing each file — not just at stage completion. This is what makes the Interrupted inventory above precise about which files were successfully written. Add `--epic "{epic}"` when this feature is an epic member — required, per the Pipeline State Protocol.
 
 ```bash
-R="$(bash -c 'for d in "${CLAUDE_PLUGIN_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
+R="$(bash -c 'for d in "${FEATURE_FORGE_ROOT:-}" "$HOME"/.claude/skills/feature-forge "$HOME"/.claude/plugins/cache/*/feature-forge/* "$HOME"/.claude/plugins/*/feature-forge "$HOME"/.agents/skills/feature-forge ./.agents/skills/feature-forge; do [ -x "$d/scripts/forge-root.sh" ] && exec "$d/scripts/forge-root.sh"; done')"
 [ -n "$R" ] || { echo "feature-forge: cannot locate plugin root" >&2; exit 1; }
 python3 "$R/scripts/forge-session.py" state-artifact \
   --feature "{feature}" --stage "{stage}" --path "<file>" --specs-dir "{specsDir}"
@@ -332,7 +406,7 @@ Invoke this block **at the head of any post-entry step that writes a stage artif
 
 1. **Proceed** when `stages.{stage}.status` is `"in-progress"` (this session's Entry Stamp — you are finishing the run you started) or absent/`pending`. Run the write / exit normally.
 
-2. **Detect-and-refuse** when ALL of these hold: `stages.{stage}.status ∈ {"complete", "stale"}` **AND** the stage's artifacts (incl. `TRACEABILITY.md` for forge-3-specs) exist on disk **AND** a `commitHash` is recorded for the stage **AND** you did **not** author this stage earlier in the current session. This is a stale/replayed continuation of an already-finished, committed stage. Do **not** overwrite the artifact or re-run the exit. Route instead to the **Stage-Entry Guard**'s *Re-authoring* path: surface the same `AskUserQuestion` warning ("A completed {stage} artifact already exists for '{feature}' (v{n}{, marked stale}). Continuing will create a new version. Proceed?"). Only on explicit confirmation re-enter from the Entry Stamp (the version bumps at exit); otherwise **stop** and report that the stage is already complete — cite the recorded `commitHash` and offer `/feature-forge:forge {feature}` to see true state.
+2. **Detect-and-refuse** when ALL of these hold: `stages.{stage}.status ∈ {"complete", "stale"}` **AND** the stage's artifacts (incl. `TRACEABILITY.md` for forge-3-specs) exist on disk **AND** a `commitHash` is recorded for the stage **AND** you did **not** author this stage earlier in the current session. This is a stale/replayed continuation of an already-finished, committed stage. Do **not** overwrite the artifact or re-run the exit. Route instead to the **Stage-Entry Guard**'s *Re-authoring* path: surface the same warning via the host's question mechanism ("A completed {stage} artifact already exists for '{feature}' (v{n}{, marked stale}). Continuing will create a new version. Proceed?"). Only on explicit confirmation re-enter from the Entry Stamp (the version bumps at exit); otherwise **stop** and report that the stage is already complete — cite the recorded `commitHash` and offer `/feature-forge:forge {feature}` to see true state.
 
 When you cannot confirm you authored the current run, treat it as a replay and refuse: a false refuse costs one confirmation click; a false proceed overwrites a committed artifact and re-churns a stage version. `--force` follows Force Mode (skip the gate, treat as a deliberate re-author).
 

package/adapters/gemini/skills/forge-3-specs/references/spec-archetypes.md

@@ -45,6 +45,15 @@ How to test this feature.
 - Coverage targets
 - Test file location conventions
 
+**Meta-guard norm (anti-churn).** A spec that mandates a meta-guard — a test protecting
+other tests or prose — must give it an **enumerated protection set** and **explicit
+non-goals**, never an open-ended objective ("un-rottable", "regardless of form"): the
+space of ways to evade a guard is not enumerable, so an unbounded objective produces an
+arms race of one-shape-per-round hardening. The guard's contract is the declared set;
+the verifier judges completeness against it and never files guard-incompleteness
+against a declared non-goal (`references/stage-exit-protocol.md` § Re-verify scope,
+decision immunity).
+
 ## Conditionally Required
 
 ### ##-{domain-concern}.md (one per major subsystem)