@fresh-editor/fresh-editor 0.3.0 → 0.3.2

package/plugins/live_diff.i18n.json

@@ -0,0 +1,450 @@
+{
+  "en": {
+    "cmd.toggle_global": "Live Diff: Toggle (Global)",
+    "cmd.toggle_global_desc": "Enable or disable live diff globally for all buffers",
+    "cmd.toggle_buffer": "Live Diff: Toggle (Buffer)",
+    "cmd.toggle_buffer_desc": "Enable or disable live diff for the current buffer (overrides the global setting)",
+    "cmd.vs_head": "Live Diff: vs HEAD",
+    "cmd.vs_head_desc": "Diff this buffer against its file at git HEAD",
+    "cmd.vs_disk": "Live Diff: vs Disk (unsaved changes)",
+    "cmd.vs_disk_desc": "Diff this buffer against the file content currently on disk",
+    "cmd.vs_branch": "Live Diff: vs Branch...",
+    "cmd.vs_branch_desc": "Diff this buffer against the file at a chosen git branch or ref",
+    "cmd.vs_default_branch": "Live Diff: vs Default Branch",
+    "cmd.vs_default_branch_desc": "Diff this buffer against origin/HEAD (falls back to main, then master)",
+    "cmd.refresh": "Live Diff: Refresh",
+    "cmd.refresh_desc": "Re-fetch the reference and recompute the diff for the current buffer",
+    "cmd.set_default": "Live Diff: Set Default Mode...",
+    "cmd.set_default_desc": "Set the default diff mode for new buffers (head, disk, or branch:<ref>)",
+    "prompt.branch": "Branch or ref",
+    "prompt.default_mode": "Default mode (head, disk, or branch:<ref>)",
+    "status.no_file": "Live Diff: No file open",
+    "status.global_enabled": "Live Diff: enabled globally",
+    "status.global_disabled": "Live Diff: disabled globally",
+    "status.buffer_enabled": "Live Diff: enabled for this buffer",
+    "status.buffer_disabled": "Live Diff: disabled for this buffer",
+    "status.mode_head": "Live Diff: comparing against HEAD",
+    "status.mode_disk": "Live Diff: comparing against file on disk",
+    "status.mode_branch": "Live Diff: comparing against %{ref}",
+    "status.refreshed": "Live Diff: reference refreshed",
+    "status.too_large": "Live Diff: file too large for live diff",
+    "status.bad_default": "Live Diff: invalid mode (use head, disk, or branch:<ref>)",
+    "status.default_set": "Live Diff: default mode updated"
+  },
+  "cs": {
+    "cmd.toggle_global": "Živý Diff: Přepnout (globálně)",
+    "cmd.toggle_global_desc": "Zapnout nebo vypnout živý diff globálně pro všechny buffery",
+    "cmd.toggle_buffer": "Živý Diff: Přepnout (buffer)",
+    "cmd.toggle_buffer_desc": "Zapnout nebo vypnout živý diff pro aktuální buffer (přepíše globální nastavení)",
+    "cmd.vs_head": "Živý Diff: vůči HEAD",
+    "cmd.vs_head_desc": "Porovnat tento buffer s verzí souboru v git HEAD",
+    "cmd.vs_disk": "Živý Diff: vůči disku (neuložené změny)",
+    "cmd.vs_disk_desc": "Porovnat tento buffer s obsahem souboru aktuálně na disku",
+    "cmd.vs_branch": "Živý Diff: vůči větvi...",
+    "cmd.vs_branch_desc": "Porovnat tento buffer s verzí souboru ve vybrané git větvi nebo referenci",
+    "cmd.vs_default_branch": "Živý Diff: vůči výchozí větvi",
+    "cmd.vs_default_branch_desc": "Porovnat tento buffer s origin/HEAD (záloha main, poté master)",
+    "cmd.refresh": "Živý Diff: Obnovit",
+    "cmd.refresh_desc": "Znovu načíst referenci a přepočítat diff pro aktuální buffer",
+    "cmd.set_default": "Živý Diff: Nastavit výchozí režim...",
+    "cmd.set_default_desc": "Nastavit výchozí režim diffu pro nové buffery (head, disk nebo branch:<ref>)",
+    "prompt.branch": "Větev nebo reference",
+    "prompt.default_mode": "Výchozí režim (head, disk nebo branch:<ref>)",
+    "status.no_file": "Živý Diff: Žádný soubor není otevřen",
+    "status.global_enabled": "Živý Diff: globálně zapnut",
+    "status.global_disabled": "Živý Diff: globálně vypnut",
+    "status.buffer_enabled": "Živý Diff: zapnut pro tento buffer",
+    "status.buffer_disabled": "Živý Diff: vypnut pro tento buffer",
+    "status.mode_head": "Živý Diff: porovnávám s HEAD",
+    "status.mode_disk": "Živý Diff: porovnávám se souborem na disku",
+    "status.mode_branch": "Živý Diff: porovnávám s %{ref}",
+    "status.refreshed": "Živý Diff: reference obnovena",
+    "status.too_large": "Živý Diff: soubor je příliš velký pro živý diff",
+    "status.bad_default": "Živý Diff: neplatný režim (použijte head, disk nebo branch:<ref>)",
+    "status.default_set": "Živý Diff: výchozí režim aktualizován"
+  },
+  "de": {
+    "cmd.toggle_global": "Live-Diff: Umschalten (global)",
+    "cmd.toggle_global_desc": "Live-Diff global für alle Puffer aktivieren oder deaktivieren",
+    "cmd.toggle_buffer": "Live-Diff: Umschalten (Puffer)",
+    "cmd.toggle_buffer_desc": "Live-Diff für den aktuellen Puffer aktivieren oder deaktivieren (überschreibt die globale Einstellung)",
+    "cmd.vs_head": "Live-Diff: gegen HEAD",
+    "cmd.vs_head_desc": "Diesen Puffer mit der Datei im git-HEAD vergleichen",
+    "cmd.vs_disk": "Live-Diff: gegen Datei (ungespeicherte Änderungen)",
+    "cmd.vs_disk_desc": "Diesen Puffer mit dem aktuell auf der Festplatte gespeicherten Dateiinhalt vergleichen",
+    "cmd.vs_branch": "Live-Diff: gegen Branch...",
+    "cmd.vs_branch_desc": "Diesen Puffer mit der Datei in einem gewählten git-Branch oder einer Referenz vergleichen",
+    "cmd.vs_default_branch": "Live-Diff: gegen Standard-Branch",
+    "cmd.vs_default_branch_desc": "Diesen Puffer mit origin/HEAD vergleichen (Rückfall auf main, dann master)",
+    "cmd.refresh": "Live-Diff: Aktualisieren",
+    "cmd.refresh_desc": "Referenz neu laden und Diff für den aktuellen Puffer neu berechnen",
+    "cmd.set_default": "Live-Diff: Standardmodus festlegen...",
+    "cmd.set_default_desc": "Standardmäßigen Diff-Modus für neue Puffer festlegen (head, disk oder branch:<ref>)",
+    "prompt.branch": "Branch oder Referenz",
+    "prompt.default_mode": "Standardmodus (head, disk oder branch:<ref>)",
+    "status.no_file": "Live-Diff: Keine Datei geöffnet",
+    "status.global_enabled": "Live-Diff: global aktiviert",
+    "status.global_disabled": "Live-Diff: global deaktiviert",
+    "status.buffer_enabled": "Live-Diff: für diesen Puffer aktiviert",
+    "status.buffer_disabled": "Live-Diff: für diesen Puffer deaktiviert",
+    "status.mode_head": "Live-Diff: Vergleich mit HEAD",
+    "status.mode_disk": "Live-Diff: Vergleich mit Datei auf der Festplatte",
+    "status.mode_branch": "Live-Diff: Vergleich mit %{ref}",
+    "status.refreshed": "Live-Diff: Referenz aktualisiert",
+    "status.too_large": "Live-Diff: Datei zu groß für Live-Diff",
+    "status.bad_default": "Live-Diff: ungültiger Modus (head, disk oder branch:<ref> verwenden)",
+    "status.default_set": "Live-Diff: Standardmodus aktualisiert"
+  },
+  "es": {
+    "cmd.toggle_global": "Diff en vivo: Alternar (global)",
+    "cmd.toggle_global_desc": "Activar o desactivar el diff en vivo globalmente para todos los búferes",
+    "cmd.toggle_buffer": "Diff en vivo: Alternar (búfer)",
+    "cmd.toggle_buffer_desc": "Activar o desactivar el diff en vivo para el búfer actual (anula la configuración global)",
+    "cmd.vs_head": "Diff en vivo: vs HEAD",
+    "cmd.vs_head_desc": "Comparar este búfer con el archivo en git HEAD",
+    "cmd.vs_disk": "Diff en vivo: vs Disco (cambios sin guardar)",
+    "cmd.vs_disk_desc": "Comparar este búfer con el contenido del archivo actualmente en disco",
+    "cmd.vs_branch": "Diff en vivo: vs Rama...",
+    "cmd.vs_branch_desc": "Comparar este búfer con el archivo en una rama o referencia git elegida",
+    "cmd.vs_default_branch": "Diff en vivo: vs Rama predeterminada",
+    "cmd.vs_default_branch_desc": "Comparar este búfer con origin/HEAD (recurre a main, luego master)",
+    "cmd.refresh": "Diff en vivo: Actualizar",
+    "cmd.refresh_desc": "Volver a obtener la referencia y recalcular el diff para el búfer actual",
+    "cmd.set_default": "Diff en vivo: Establecer modo predeterminado...",
+    "cmd.set_default_desc": "Establecer el modo de diff predeterminado para nuevos búferes (head, disk o branch:<ref>)",
+    "prompt.branch": "Rama o referencia",
+    "prompt.default_mode": "Modo predeterminado (head, disk o branch:<ref>)",
+    "status.no_file": "Diff en vivo: Ningún archivo abierto",
+    "status.global_enabled": "Diff en vivo: activado globalmente",
+    "status.global_disabled": "Diff en vivo: desactivado globalmente",
+    "status.buffer_enabled": "Diff en vivo: activado para este búfer",
+    "status.buffer_disabled": "Diff en vivo: desactivado para este búfer",
+    "status.mode_head": "Diff en vivo: comparando contra HEAD",
+    "status.mode_disk": "Diff en vivo: comparando contra archivo en disco",
+    "status.mode_branch": "Diff en vivo: comparando contra %{ref}",
+    "status.refreshed": "Diff en vivo: referencia actualizada",
+    "status.too_large": "Diff en vivo: archivo demasiado grande para diff en vivo",
+    "status.bad_default": "Diff en vivo: modo inválido (use head, disk o branch:<ref>)",
+    "status.default_set": "Diff en vivo: modo predeterminado actualizado"
+  },
+  "fr": {
+    "cmd.toggle_global": "Diff en direct : Activer/Désactiver (global)",
+    "cmd.toggle_global_desc": "Activer ou désactiver le diff en direct globalement pour tous les tampons",
+    "cmd.toggle_buffer": "Diff en direct : Activer/Désactiver (tampon)",
+    "cmd.toggle_buffer_desc": "Activer ou désactiver le diff en direct pour le tampon actuel (remplace le réglage global)",
+    "cmd.vs_head": "Diff en direct : vs HEAD",
+    "cmd.vs_head_desc": "Comparer ce tampon au fichier dans HEAD git",
+    "cmd.vs_disk": "Diff en direct : vs Disque (modifications non enregistrées)",
+    "cmd.vs_disk_desc": "Comparer ce tampon au contenu du fichier actuellement sur disque",
+    "cmd.vs_branch": "Diff en direct : vs Branche...",
+    "cmd.vs_branch_desc": "Comparer ce tampon au fichier dans une branche ou référence git choisie",
+    "cmd.vs_default_branch": "Diff en direct : vs Branche par défaut",
+    "cmd.vs_default_branch_desc": "Comparer ce tampon à origin/HEAD (repli sur main, puis master)",
+    "cmd.refresh": "Diff en direct : Rafraîchir",
+    "cmd.refresh_desc": "Recharger la référence et recalculer le diff pour le tampon actuel",
+    "cmd.set_default": "Diff en direct : Définir le mode par défaut...",
+    "cmd.set_default_desc": "Définir le mode de diff par défaut pour les nouveaux tampons (head, disk ou branch:<ref>)",
+    "prompt.branch": "Branche ou référence",
+    "prompt.default_mode": "Mode par défaut (head, disk ou branch:<ref>)",
+    "status.no_file": "Diff en direct : Aucun fichier ouvert",
+    "status.global_enabled": "Diff en direct : activé globalement",
+    "status.global_disabled": "Diff en direct : désactivé globalement",
+    "status.buffer_enabled": "Diff en direct : activé pour ce tampon",
+    "status.buffer_disabled": "Diff en direct : désactivé pour ce tampon",
+    "status.mode_head": "Diff en direct : comparaison avec HEAD",
+    "status.mode_disk": "Diff en direct : comparaison avec le fichier sur disque",
+    "status.mode_branch": "Diff en direct : comparaison avec %{ref}",
+    "status.refreshed": "Diff en direct : référence rafraîchie",
+    "status.too_large": "Diff en direct : fichier trop volumineux pour un diff en direct",
+    "status.bad_default": "Diff en direct : mode invalide (utilisez head, disk ou branch:<ref>)",
+    "status.default_set": "Diff en direct : mode par défaut mis à jour"
+  },
+  "it": {
+    "cmd.toggle_global": "Diff in tempo reale: Attiva/Disattiva (globale)",
+    "cmd.toggle_global_desc": "Attiva o disattiva il diff in tempo reale globalmente per tutti i buffer",
+    "cmd.toggle_buffer": "Diff in tempo reale: Attiva/Disattiva (buffer)",
+    "cmd.toggle_buffer_desc": "Attiva o disattiva il diff in tempo reale per il buffer corrente (sovrascrive l'impostazione globale)",
+    "cmd.vs_head": "Diff in tempo reale: vs HEAD",
+    "cmd.vs_head_desc": "Confronta questo buffer con il file su git HEAD",
+    "cmd.vs_disk": "Diff in tempo reale: vs Disco (modifiche non salvate)",
+    "cmd.vs_disk_desc": "Confronta questo buffer con il contenuto del file attualmente su disco",
+    "cmd.vs_branch": "Diff in tempo reale: vs Ramo...",
+    "cmd.vs_branch_desc": "Confronta questo buffer con il file su un ramo o riferimento git scelto",
+    "cmd.vs_default_branch": "Diff in tempo reale: vs Ramo predefinito",
+    "cmd.vs_default_branch_desc": "Confronta questo buffer con origin/HEAD (ripiego su main, poi master)",
+    "cmd.refresh": "Diff in tempo reale: Aggiorna",
+    "cmd.refresh_desc": "Ricarica il riferimento e ricalcola il diff per il buffer corrente",
+    "cmd.set_default": "Diff in tempo reale: Imposta modalità predefinita...",
+    "cmd.set_default_desc": "Imposta la modalità di diff predefinita per i nuovi buffer (head, disk o branch:<ref>)",
+    "prompt.branch": "Ramo o riferimento",
+    "prompt.default_mode": "Modalità predefinita (head, disk o branch:<ref>)",
+    "status.no_file": "Diff in tempo reale: Nessun file aperto",
+    "status.global_enabled": "Diff in tempo reale: attivato globalmente",
+    "status.global_disabled": "Diff in tempo reale: disattivato globalmente",
+    "status.buffer_enabled": "Diff in tempo reale: attivato per questo buffer",
+    "status.buffer_disabled": "Diff in tempo reale: disattivato per questo buffer",
+    "status.mode_head": "Diff in tempo reale: confronto con HEAD",
+    "status.mode_disk": "Diff in tempo reale: confronto con il file su disco",
+    "status.mode_branch": "Diff in tempo reale: confronto con %{ref}",
+    "status.refreshed": "Diff in tempo reale: riferimento aggiornato",
+    "status.too_large": "Diff in tempo reale: file troppo grande per il diff in tempo reale",
+    "status.bad_default": "Diff in tempo reale: modalità non valida (usa head, disk o branch:<ref>)",
+    "status.default_set": "Diff in tempo reale: modalità predefinita aggiornata"
+  },
+  "ja": {
+    "cmd.toggle_global": "ライブ差分: 切り替え (グローバル)",
+    "cmd.toggle_global_desc": "すべてのバッファでライブ差分をグローバルに有効化または無効化",
+    "cmd.toggle_buffer": "ライブ差分: 切り替え (バッファ)",
+    "cmd.toggle_buffer_desc": "現在のバッファのライブ差分を有効化または無効化 (グローバル設定を上書き)",
+    "cmd.vs_head": "ライブ差分: HEADと比較",
+    "cmd.vs_head_desc": "このバッファを git HEAD のファイルと比較",
+    "cmd.vs_disk": "ライブ差分: ディスクと比較 (未保存の変更)",
+    "cmd.vs_disk_desc": "このバッファを現在ディスクにあるファイル内容と比較",
+    "cmd.vs_branch": "ライブ差分: ブランチと比較...",
+    "cmd.vs_branch_desc": "このバッファを指定した git ブランチまたはリファレンスのファイルと比較",
+    "cmd.vs_default_branch": "ライブ差分: デフォルトブランチと比較",
+    "cmd.vs_default_branch_desc": "このバッファを origin/HEAD と比較 (フォールバック: main、次に master)",
+    "cmd.refresh": "ライブ差分: 更新",
+    "cmd.refresh_desc": "リファレンスを再取得し、現在のバッファの差分を再計算",
+    "cmd.set_default": "ライブ差分: デフォルトモードを設定...",
+    "cmd.set_default_desc": "新規バッファの既定の差分モードを設定 (head、disk、または branch:<ref>)",
+    "prompt.branch": "ブランチまたはリファレンス",
+    "prompt.default_mode": "デフォルトモード (head、disk、または branch:<ref>)",
+    "status.no_file": "ライブ差分: ファイルが開かれていません",
+    "status.global_enabled": "ライブ差分: グローバルに有効",
+    "status.global_disabled": "ライブ差分: グローバルに無効",
+    "status.buffer_enabled": "ライブ差分: このバッファで有効",
+    "status.buffer_disabled": "ライブ差分: このバッファでは無効",
+    "status.mode_head": "ライブ差分: HEAD と比較中",
+    "status.mode_disk": "ライブ差分: ディスク上のファイルと比較中",
+    "status.mode_branch": "ライブ差分: %{ref} と比較中",
+    "status.refreshed": "ライブ差分: リファレンスを更新しました",
+    "status.too_large": "ライブ差分: ファイルが大きすぎます",
+    "status.bad_default": "ライブ差分: 無効なモード (head、disk、または branch:<ref> を使用)",
+    "status.default_set": "ライブ差分: デフォルトモードを更新しました"
+  },
+  "ko": {
+    "cmd.toggle_global": "라이브 Diff: 켜기/끄기 (전역)",
+    "cmd.toggle_global_desc": "모든 버퍼에 대해 라이브 diff 전역 활성화 또는 비활성화",
+    "cmd.toggle_buffer": "라이브 Diff: 켜기/끄기 (버퍼)",
+    "cmd.toggle_buffer_desc": "현재 버퍼의 라이브 diff 활성화 또는 비활성화 (전역 설정보다 우선)",
+    "cmd.vs_head": "라이브 Diff: HEAD와 비교",
+    "cmd.vs_head_desc": "이 버퍼를 git HEAD의 파일과 비교",
+    "cmd.vs_disk": "라이브 Diff: 디스크와 비교 (저장되지 않은 변경)",
+    "cmd.vs_disk_desc": "이 버퍼를 현재 디스크에 있는 파일 내용과 비교",
+    "cmd.vs_branch": "라이브 Diff: 브랜치와 비교...",
+    "cmd.vs_branch_desc": "이 버퍼를 선택한 git 브랜치 또는 참조의 파일과 비교",
+    "cmd.vs_default_branch": "라이브 Diff: 기본 브랜치와 비교",
+    "cmd.vs_default_branch_desc": "이 버퍼를 origin/HEAD와 비교 (대체: main, 그다음 master)",
+    "cmd.refresh": "라이브 Diff: 새로고침",
+    "cmd.refresh_desc": "참조를 다시 가져와 현재 버퍼의 diff를 재계산",
+    "cmd.set_default": "라이브 Diff: 기본 모드 설정...",
+    "cmd.set_default_desc": "새 버퍼의 기본 diff 모드 설정 (head, disk, 또는 branch:<ref>)",
+    "prompt.branch": "브랜치 또는 참조",
+    "prompt.default_mode": "기본 모드 (head, disk, 또는 branch:<ref>)",
+    "status.no_file": "라이브 Diff: 열린 파일 없음",
+    "status.global_enabled": "라이브 Diff: 전역 활성화됨",
+    "status.global_disabled": "라이브 Diff: 전역 비활성화됨",
+    "status.buffer_enabled": "라이브 Diff: 이 버퍼에서 활성화됨",
+    "status.buffer_disabled": "라이브 Diff: 이 버퍼에서 비활성화됨",
+    "status.mode_head": "라이브 Diff: HEAD와 비교 중",
+    "status.mode_disk": "라이브 Diff: 디스크의 파일과 비교 중",
+    "status.mode_branch": "라이브 Diff: %{ref}와 비교 중",
+    "status.refreshed": "라이브 Diff: 참조 새로고침됨",
+    "status.too_large": "라이브 Diff: 파일이 너무 커서 라이브 diff 불가",
+    "status.bad_default": "라이브 Diff: 잘못된 모드 (head, disk, 또는 branch:<ref> 사용)",
+    "status.default_set": "라이브 Diff: 기본 모드 업데이트됨"
+  },
+  "pt-BR": {
+    "cmd.toggle_global": "Diff ao vivo: Alternar (global)",
+    "cmd.toggle_global_desc": "Ativar ou desativar o diff ao vivo globalmente para todos os buffers",
+    "cmd.toggle_buffer": "Diff ao vivo: Alternar (buffer)",
+    "cmd.toggle_buffer_desc": "Ativar ou desativar o diff ao vivo para o buffer atual (substitui a configuração global)",
+    "cmd.vs_head": "Diff ao vivo: vs HEAD",
+    "cmd.vs_head_desc": "Comparar este buffer com o arquivo no git HEAD",
+    "cmd.vs_disk": "Diff ao vivo: vs Disco (alterações não salvas)",
+    "cmd.vs_disk_desc": "Comparar este buffer com o conteúdo do arquivo atualmente em disco",
+    "cmd.vs_branch": "Diff ao vivo: vs Branch...",
+    "cmd.vs_branch_desc": "Comparar este buffer com o arquivo em um branch ou referência git escolhido",
+    "cmd.vs_default_branch": "Diff ao vivo: vs Branch padrão",
+    "cmd.vs_default_branch_desc": "Comparar este buffer com origin/HEAD (recorre a main, depois master)",
+    "cmd.refresh": "Diff ao vivo: Atualizar",
+    "cmd.refresh_desc": "Recarregar a referência e recalcular o diff para o buffer atual",
+    "cmd.set_default": "Diff ao vivo: Definir modo padrão...",
+    "cmd.set_default_desc": "Definir o modo de diff padrão para novos buffers (head, disk ou branch:<ref>)",
+    "prompt.branch": "Branch ou referência",
+    "prompt.default_mode": "Modo padrão (head, disk ou branch:<ref>)",
+    "status.no_file": "Diff ao vivo: Nenhum arquivo aberto",
+    "status.global_enabled": "Diff ao vivo: ativado globalmente",
+    "status.global_disabled": "Diff ao vivo: desativado globalmente",
+    "status.buffer_enabled": "Diff ao vivo: ativado para este buffer",
+    "status.buffer_disabled": "Diff ao vivo: desativado para este buffer",
+    "status.mode_head": "Diff ao vivo: comparando com HEAD",
+    "status.mode_disk": "Diff ao vivo: comparando com arquivo em disco",
+    "status.mode_branch": "Diff ao vivo: comparando com %{ref}",
+    "status.refreshed": "Diff ao vivo: referência atualizada",
+    "status.too_large": "Diff ao vivo: arquivo muito grande para diff ao vivo",
+    "status.bad_default": "Diff ao vivo: modo inválido (use head, disk ou branch:<ref>)",
+    "status.default_set": "Diff ao vivo: modo padrão atualizado"
+  },
+  "ru": {
+    "cmd.toggle_global": "Живой Diff: Переключить (глобально)",
+    "cmd.toggle_global_desc": "Включить или отключить живой diff глобально для всех буферов",
+    "cmd.toggle_buffer": "Живой Diff: Переключить (буфер)",
+    "cmd.toggle_buffer_desc": "Включить или отключить живой diff для текущего буфера (переопределяет глобальную настройку)",
+    "cmd.vs_head": "Живой Diff: с HEAD",
+    "cmd.vs_head_desc": "Сравнить этот буфер с файлом в git HEAD",
+    "cmd.vs_disk": "Живой Diff: с диском (несохранённые изменения)",
+    "cmd.vs_disk_desc": "Сравнить этот буфер с содержимым файла, находящимся сейчас на диске",
+    "cmd.vs_branch": "Живой Diff: с веткой...",
+    "cmd.vs_branch_desc": "Сравнить этот буфер с файлом в выбранной git-ветке или ссылке",
+    "cmd.vs_default_branch": "Живой Diff: с веткой по умолчанию",
+    "cmd.vs_default_branch_desc": "Сравнить этот буфер с origin/HEAD (запасной вариант: main, затем master)",
+    "cmd.refresh": "Живой Diff: Обновить",
+    "cmd.refresh_desc": "Перезагрузить эталон и пересчитать diff для текущего буфера",
+    "cmd.set_default": "Живой Diff: Установить режим по умолчанию...",
+    "cmd.set_default_desc": "Установить режим diff по умолчанию для новых буферов (head, disk или branch:<ref>)",
+    "prompt.branch": "Ветка или ссылка",
+    "prompt.default_mode": "Режим по умолчанию (head, disk или branch:<ref>)",
+    "status.no_file": "Живой Diff: Нет открытого файла",
+    "status.global_enabled": "Живой Diff: включён глобально",
+    "status.global_disabled": "Живой Diff: отключён глобально",
+    "status.buffer_enabled": "Живой Diff: включён для этого буфера",
+    "status.buffer_disabled": "Живой Diff: отключён для этого буфера",
+    "status.mode_head": "Живой Diff: сравнение с HEAD",
+    "status.mode_disk": "Живой Diff: сравнение с файлом на диске",
+    "status.mode_branch": "Живой Diff: сравнение с %{ref}",
+    "status.refreshed": "Живой Diff: эталон обновлён",
+    "status.too_large": "Живой Diff: файл слишком большой для живого diff",
+    "status.bad_default": "Живой Diff: недопустимый режим (используйте head, disk или branch:<ref>)",
+    "status.default_set": "Живой Diff: режим по умолчанию обновлён"
+  },
+  "th": {
+    "cmd.toggle_global": "Diff สด: สลับ (ทั่วโลก)",
+    "cmd.toggle_global_desc": "เปิดหรือปิด diff สดทั่วทั้งหมดสำหรับทุกบัฟเฟอร์",
+    "cmd.toggle_buffer": "Diff สด: สลับ (บัฟเฟอร์)",
+    "cmd.toggle_buffer_desc": "เปิดหรือปิด diff สดสำหรับบัฟเฟอร์ปัจจุบัน (แทนที่การตั้งค่าทั่วโลก)",
+    "cmd.vs_head": "Diff สด: เทียบกับ HEAD",
+    "cmd.vs_head_desc": "เปรียบเทียบบัฟเฟอร์นี้กับไฟล์ใน git HEAD",
+    "cmd.vs_disk": "Diff สด: เทียบกับดิสก์ (การเปลี่ยนแปลงที่ยังไม่ได้บันทึก)",
+    "cmd.vs_disk_desc": "เปรียบเทียบบัฟเฟอร์นี้กับเนื้อหาไฟล์ที่อยู่บนดิสก์ในขณะนี้",
+    "cmd.vs_branch": "Diff สด: เทียบกับสาขา...",
+    "cmd.vs_branch_desc": "เปรียบเทียบบัฟเฟอร์นี้กับไฟล์ในสาขาหรือการอ้างอิง git ที่เลือก",
+    "cmd.vs_default_branch": "Diff สด: เทียบกับสาขาเริ่มต้น",
+    "cmd.vs_default_branch_desc": "เปรียบเทียบบัฟเฟอร์นี้กับ origin/HEAD (สำรอง: main แล้วก็ master)",
+    "cmd.refresh": "Diff สด: รีเฟรช",
+    "cmd.refresh_desc": "ดึงการอ้างอิงใหม่และคำนวณ diff สำหรับบัฟเฟอร์ปัจจุบันใหม่",
+    "cmd.set_default": "Diff สด: ตั้งโหมดเริ่มต้น...",
+    "cmd.set_default_desc": "ตั้งโหมด diff เริ่มต้นสำหรับบัฟเฟอร์ใหม่ (head, disk หรือ branch:<ref>)",
+    "prompt.branch": "สาขาหรือการอ้างอิง",
+    "prompt.default_mode": "โหมดเริ่มต้น (head, disk หรือ branch:<ref>)",
+    "status.no_file": "Diff สด: ไม่มีไฟล์เปิดอยู่",
+    "status.global_enabled": "Diff สด: เปิดใช้งานทั่วโลก",
+    "status.global_disabled": "Diff สด: ปิดใช้งานทั่วโลก",
+    "status.buffer_enabled": "Diff สด: เปิดใช้งานสำหรับบัฟเฟอร์นี้",
+    "status.buffer_disabled": "Diff สด: ปิดใช้งานสำหรับบัฟเฟอร์นี้",
+    "status.mode_head": "Diff สด: กำลังเปรียบเทียบกับ HEAD",
+    "status.mode_disk": "Diff สด: กำลังเปรียบเทียบกับไฟล์บนดิสก์",
+    "status.mode_branch": "Diff สด: กำลังเปรียบเทียบกับ %{ref}",
+    "status.refreshed": "Diff สด: รีเฟรชการอ้างอิงแล้ว",
+    "status.too_large": "Diff สด: ไฟล์ใหญ่เกินไปสำหรับ diff สด",
+    "status.bad_default": "Diff สด: โหมดไม่ถูกต้อง (ใช้ head, disk หรือ branch:<ref>)",
+    "status.default_set": "Diff สด: อัปเดตโหมดเริ่มต้นแล้ว"
+  },
+  "uk": {
+    "cmd.toggle_global": "Живий Diff: Перемкнути (глобально)",
+    "cmd.toggle_global_desc": "Увімкнути або вимкнути живий diff глобально для всіх буферів",
+    "cmd.toggle_buffer": "Живий Diff: Перемкнути (буфер)",
+    "cmd.toggle_buffer_desc": "Увімкнути або вимкнути живий diff для поточного буфера (замінює глобальне налаштування)",
+    "cmd.vs_head": "Живий Diff: проти HEAD",
+    "cmd.vs_head_desc": "Порівняти цей буфер із файлом у git HEAD",
+    "cmd.vs_disk": "Живий Diff: проти диска (незбережені зміни)",
+    "cmd.vs_disk_desc": "Порівняти цей буфер із вмістом файлу, який зараз на диску",
+    "cmd.vs_branch": "Живий Diff: проти гілки...",
+    "cmd.vs_branch_desc": "Порівняти цей буфер із файлом у вибраній git-гілці або посиланні",
+    "cmd.vs_default_branch": "Живий Diff: проти типової гілки",
+    "cmd.vs_default_branch_desc": "Порівняти цей буфер із origin/HEAD (запасний варіант: main, потім master)",
+    "cmd.refresh": "Живий Diff: Оновити",
+    "cmd.refresh_desc": "Перезавантажити еталон і перерахувати diff для поточного буфера",
+    "cmd.set_default": "Живий Diff: Встановити типовий режим...",
+    "cmd.set_default_desc": "Встановити типовий режим diff для нових буферів (head, disk або branch:<ref>)",
+    "prompt.branch": "Гілка або посилання",
+    "prompt.default_mode": "Типовий режим (head, disk або branch:<ref>)",
+    "status.no_file": "Живий Diff: Немає відкритого файлу",
+    "status.global_enabled": "Живий Diff: увімкнено глобально",
+    "status.global_disabled": "Живий Diff: вимкнено глобально",
+    "status.buffer_enabled": "Живий Diff: увімкнено для цього буфера",
+    "status.buffer_disabled": "Живий Diff: вимкнено для цього буфера",
+    "status.mode_head": "Живий Diff: порівняння з HEAD",
+    "status.mode_disk": "Живий Diff: порівняння з файлом на диску",
+    "status.mode_branch": "Живий Diff: порівняння з %{ref}",
+    "status.refreshed": "Живий Diff: еталон оновлено",
+    "status.too_large": "Живий Diff: файл завеликий для живого diff",
+    "status.bad_default": "Живий Diff: неприпустимий режим (використовуйте head, disk або branch:<ref>)",
+    "status.default_set": "Живий Diff: типовий режим оновлено"
+  },
+  "vi": {
+    "cmd.toggle_global": "Diff trực tiếp: Bật/Tắt (toàn cục)",
+    "cmd.toggle_global_desc": "Bật hoặc tắt diff trực tiếp toàn cục cho tất cả các buffer",
+    "cmd.toggle_buffer": "Diff trực tiếp: Bật/Tắt (buffer)",
+    "cmd.toggle_buffer_desc": "Bật hoặc tắt diff trực tiếp cho buffer hiện tại (ghi đè cài đặt toàn cục)",
+    "cmd.vs_head": "Diff trực tiếp: so với HEAD",
+    "cmd.vs_head_desc": "So sánh buffer này với tệp tại git HEAD",
+    "cmd.vs_disk": "Diff trực tiếp: so với đĩa (thay đổi chưa lưu)",
+    "cmd.vs_disk_desc": "So sánh buffer này với nội dung tệp hiện đang ở trên đĩa",
+    "cmd.vs_branch": "Diff trực tiếp: so với nhánh...",
+    "cmd.vs_branch_desc": "So sánh buffer này với tệp ở nhánh hoặc tham chiếu git được chọn",
+    "cmd.vs_default_branch": "Diff trực tiếp: so với nhánh mặc định",
+    "cmd.vs_default_branch_desc": "So sánh buffer này với origin/HEAD (dự phòng: main, sau đó master)",
+    "cmd.refresh": "Diff trực tiếp: Làm mới",
+    "cmd.refresh_desc": "Tải lại tham chiếu và tính lại diff cho buffer hiện tại",
+    "cmd.set_default": "Diff trực tiếp: Đặt chế độ mặc định...",
+    "cmd.set_default_desc": "Đặt chế độ diff mặc định cho buffer mới (head, disk hoặc branch:<ref>)",
+    "prompt.branch": "Nhánh hoặc tham chiếu",
+    "prompt.default_mode": "Chế độ mặc định (head, disk hoặc branch:<ref>)",
+    "status.no_file": "Diff trực tiếp: Không có tệp mở",
+    "status.global_enabled": "Diff trực tiếp: đã bật toàn cục",
+    "status.global_disabled": "Diff trực tiếp: đã tắt toàn cục",
+    "status.buffer_enabled": "Diff trực tiếp: đã bật cho buffer này",
+    "status.buffer_disabled": "Diff trực tiếp: đã tắt cho buffer này",
+    "status.mode_head": "Diff trực tiếp: đang so sánh với HEAD",
+    "status.mode_disk": "Diff trực tiếp: đang so sánh với tệp trên đĩa",
+    "status.mode_branch": "Diff trực tiếp: đang so sánh với %{ref}",
+    "status.refreshed": "Diff trực tiếp: đã làm mới tham chiếu",
+    "status.too_large": "Diff trực tiếp: tệp quá lớn để diff trực tiếp",
+    "status.bad_default": "Diff trực tiếp: chế độ không hợp lệ (sử dụng head, disk hoặc branch:<ref>)",
+    "status.default_set": "Diff trực tiếp: đã cập nhật chế độ mặc định"
+  },
+  "zh-CN": {
+    "cmd.toggle_global": "实时 Diff: 切换 (全局)",
+    "cmd.toggle_global_desc": "为所有缓冲区全局启用或禁用实时 diff",
+    "cmd.toggle_buffer": "实时 Diff: 切换 (缓冲区)",
+    "cmd.toggle_buffer_desc": "为当前缓冲区启用或禁用实时 diff (覆盖全局设置)",
+    "cmd.vs_head": "实时 Diff: 对比 HEAD",
+    "cmd.vs_head_desc": "将此缓冲区与 git HEAD 中的文件进行对比",
+    "cmd.vs_disk": "实时 Diff: 对比磁盘 (未保存的更改)",
+    "cmd.vs_disk_desc": "将此缓冲区与磁盘上当前的文件内容进行对比",
+    "cmd.vs_branch": "实时 Diff: 对比分支...",
+    "cmd.vs_branch_desc": "将此缓冲区与所选 git 分支或引用中的文件进行对比",
+    "cmd.vs_default_branch": "实时 Diff: 对比默认分支",
+    "cmd.vs_default_branch_desc": "将此缓冲区与 origin/HEAD 对比 (回退到 main，再到 master)",
+    "cmd.refresh": "实时 Diff: 刷新",
+    "cmd.refresh_desc": "重新获取参照并重算当前缓冲区的 diff",
+    "cmd.set_default": "实时 Diff: 设置默认模式...",
+    "cmd.set_default_desc": "为新缓冲区设置默认 diff 模式 (head、disk 或 branch:<ref>)",
+    "prompt.branch": "分支或引用",
+    "prompt.default_mode": "默认模式 (head、disk 或 branch:<ref>)",
+    "status.no_file": "实时 Diff: 没有打开的文件",
+    "status.global_enabled": "实时 Diff: 已全局启用",
+    "status.global_disabled": "实时 Diff: 已全局禁用",
+    "status.buffer_enabled": "实时 Diff: 已为此缓冲区启用",
+    "status.buffer_disabled": "实时 Diff: 已为此缓冲区禁用",
+    "status.mode_head": "实时 Diff: 正在与 HEAD 对比",
+    "status.mode_disk": "实时 Diff: 正在与磁盘上的文件对比",
+    "status.mode_branch": "实时 Diff: 正在与 %{ref} 对比",
+    "status.refreshed": "实时 Diff: 参照已刷新",
+    "status.too_large": "实时 Diff: 文件过大，无法进行实时 diff",
+    "status.bad_default": "实时 Diff: 模式无效 (使用 head、disk 或 branch:<ref>)",
+    "status.default_set": "实时 Diff: 默认模式已更新"
+  }
+}