@faicad/faijs-fasteners 0.29.3

package/LICENSE

@@ -0,0 +1,202 @@
+
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

package/README.i18n.yaml

@@ -0,0 +1,6 @@
+# Bilingual-pair consistency record (docs/i18n/README.md): the git blob hash of each
+# side as of the last confirmed-consistent state. Both languages carry equal authority;
+# after editing either side, bring the other along and re-record with:
+#   pnpm run verify-translation-pairing --write packages/faijs-fasteners/README.md
+README.md: 1062e0adea4ebb4a3618fd1b83bd767c140aea43
+README.zh.md: d8350f22a8577befbb0f7a1520826dd688ee0660

package/README.md

@@ -0,0 +1,16 @@
+# @faicad/faijs-fasteners
+
+English | [中文](README.zh.md)
+
+Standard fasteners and hardware for faijs: threads, nuts, screws, washers, bearings, sprockets, chains, and fastener holes.
+
+## Origin
+
+This package is a TypeScript port of [cq_warehouse](https://github.com/gadgetguy/cq-warehouse) (v0.8.0), the CadQuery standard-parts library by Maurice Lambert. Geometry semantics, parameter tables (ISO/DIN spec data), and class behavior follow the upstream Python source; the port was verified part-by-part against upstream-generated STEP references (see `fixtures/reference/`).
+
+- Upstream source used for reference: `C:/git/CADQ/cq_warehouse/src`
+- License: Apache-2.0 (matching upstream)
+
+## Renaming history
+
+Originally named `@faicad/fai-cq-warehouse` (after the upstream brand); renamed to `@faicad/faijs-fasteners` on 2026-10-02 to match the faijs product-line naming convention and to describe the actual content. The `cq_warehouse` name is retained here as the origin attribution.

package/README.zh.md

@@ -0,0 +1,16 @@
+# @faicad/faijs-fasteners
+
+[English](README.md) | 中文
+
+faijs 的标准紧固件与五金件库：螺纹、螺母、螺钉、垫圈、轴承、链轮、链条与紧固孔。
+
+## 来源
+
+本包是 [cq_warehouse](https://github.com/gadgetguy/cq-warehouse)（v0.8.0，Maurice Lambert 的 CadQuery 标准件库）的 TypeScript 移植。几何语义、参数表（ISO/DIN 规格数据）与类行为均遵循上游 Python 源码；移植结果逐件对照上游生成的 STEP 参考做了验证（见 `fixtures/reference/`）。
+
+- 参考用上游源码：`C:/git/CADQ/cq_warehouse/src`
+- 许可证：Apache-2.0（与上游一致）
+
+## 改名历史
+
+最初名为 `@faicad/fai-cq-warehouse`（沿用上游品牌）；2026-10-02 改名为 `@faicad/faijs-fasteners`，以对齐 faijs 产品线命名约定并如实描述包内容。`cq_warehouse` 名称在此保留作为来源归属。

package/dist/bearing.d.ts

@@ -0,0 +1,81 @@
+/**
+ * bearing.ts — 轴承 5 类（W6）—— 上游 `cq_warehouse.bearing.Bearing` 基类 +
+ * 5 个子类的逐位复刻。
+ *
+ * 装配流（`bearing.py:223 make_bearing`）：
+ * ```
+ *   outer_race = revolve(outer_race_section)        # XZ 平面轮廓绕 Z 旋 360°
+ *   inner_race = revolve(inner_race_section)
+ *   bearing    = outer.fuse(inner)
+ *   if capped:  bearing = bearing.fuse(cap).fuse(cap.mirror("XY").translate((0,0,B)))
+ *   else:       for each roller in polarArray(race_center_radius, N):
+ *                  bearing = bearing.fuse(roller.located(Location((0,0,B/2))))
+ *                if cage: bearing = bearing.fuse(cage)
+ * ```
+ * 滚子（roller）：深沟球/角接触 = 球；圆柱滚子 = 圆柱；圆锥滚子 = 圆锥（绕 X 倾
+ * `roller_axis_angle`）。
+ *
+ * 几何坐标：轮廓画在 XZ 平面（局部 x → 世界 X＝半径、局部 y → 世界 +Z），
+ * `revolveProfile` 绕 Z 轴 360°。滚子阵列在 XY 平面内半径 `race_center_radius`
+ * 处，整体抬升到 `z = B/2`（与上游 `polarArray` + `Location((0,0,B/2))` 完全同构）。
+ *
+ * ⚠️ **两条本阶段首次确认、并由 `scripts/kernel-bearing-probe.py` 实测锁定的复刻事实**：
+ * 1. `Sketch.trapezoid(w,h,a1,a2,angle)`（`sketch.py:284`）经 `.push((cx,cy))` 平移 +
+ *    `.faces()[0].rotate(Y, −90)` 映射成 (半径=|Y|, z=X) 的凸四边形，其中 `angle`
+ *    是绕 Z 的**整体旋转**（不是 a2）。`cup` 用 `angle=90°`、`cone` 用 `angle=−90°`，
+ *   两者 a2 恒为 90°，故 v4 的 `h/tan(a2)` 项恒为 0。四角 line-line 圆角（r34/r12）
+ *    用本文件的 `lineLineFillet` 精确解，与上游 `vertices().fillet()` 在凸四边形上等价。
+ * 2. **圆锥滚子的 `roller_diameter` 是几何测量值**：上游 `roller.faces(">Z").edges()
+ *    .val().radius()*2.5`，即锥顶（z=B/2 处）那一圈半径 ×2.5；本包直接算
+ *    `2.5·cone_radii[0]`（cone_radii[0] 是 `makeCone` 顶端半径），无需真建锥再量。
+ * 3. **上游 `cone_length` 的著名 quirk**：`(Db/2)/asin(radians(a))`（用了 `asin`
+ *    而非 `sin`），`cone_angle` 与 `race_center_radius` 都依赖于此——必须逐字复刻，
+ *    否则圆锥几何整体偏移。已写入本文件并在探针中数字比对一致。
+ */
+import type { BrepHandle } from '@faicad/faijs';
+import { type BearingClassName } from './params.js';
+/**
+ * 圆锥轴承内圈（cone）截面的角点（radius=x, height=y）由 `buildBearing` 的 tapered
+ * 分支内联构造——因为 cx = T − B/2 依赖 T，闭式由 `scripts/kernel-bearing-probe.py`
+ * 对照 cadquery 实测锁定（CONE match=True）：
+ *   V1=(|cy+w/2|, cx−B/2), V2=(|cy−w/2|, cx−B/2),
+ *   V4=(|cy−w/2|, cx+B/2), V3=(|cy+w/2−B·tan(90+coneAngle), cx+B/2),
+ *   cy = d/2 + (da−d)/2, cx = T − B/2。
+ */
+/**
+ * 球滚子（半圆盘 revolve → 实体球）。
+ * @param radius - 球半径。
+ * @returns 球体 BREP 句柄。
+ */
+export declare function sphere(radius: number): BrepHandle;
+/** 轴承构造入参（args 逐字取自 manifest）。 */
+export interface BearingParams {
+    size: string;
+    bearingType: string;
+}
+/** 轴承构造结果（含上游派生量，供测试锁定）。 */
+export interface BearingResult {
+    handle: BrepHandle;
+    /** 内径 d。 */
+    boreDiameter: number;
+    /** 外径 D。 */
+    outerDiameter: number;
+    /** 宽度（tapered = T，其余 = B）。 */
+    thickness: number;
+    /** 滚子直径。 */
+    rollerDiameter: number;
+    /** 滚道中心半径。 */
+    raceCenterRadius: number;
+    /** 滚子数量。 */
+    rollerCount: number;
+}
+/** 5 类轴承的 W6 验收清单（方案 §8-W6）。 */
+export declare const BEARING_CLASSES: readonly BearingClassName[];
+/**
+ * 构造一个轴承（5 类统一入口）。
+ * @param className - 轴承类名。
+ * @param p - 构造入参（size / bearing_type）。
+ * @returns 轴承实体与上游派生量。
+ */
+export declare function buildBearing(className: BearingClassName, p: BearingParams): BearingResult;
+//# sourceMappingURL=bearing.d.ts.map

package/dist/bearing.d.ts.map

@@ -0,0 +1 @@
+{"version":3,"file":"bearing.d.ts","sourceRoot":"","sources":["../src/bearing.ts"],"names":[],"mappings":"AAGA;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;GAiCG;AAEH,OAAO,KAAK,EAAE,UAAU,EAAY,MAAM,eAAe,CAAA;AAgBzD,OAAO,EAGL,KAAK,gBAAgB,EACtB,MAAM,UAAU,CAAA;AA0PjB;;;;;;;GAOG;AAEH;;;;GAIG;AACH,wBAAgB,MAAM,CAAC,MAAM,EAAE,MAAM,GAAG,UAAU,CAMjD;AAiCD,kCAAkC;AAClC,MAAM,WAAW,aAAa;IAC5B,IAAI,EAAE,MAAM,CAAA;IACZ,WAAW,EAAE,MAAM,CAAA;CACpB;AAED,4BAA4B;AAC5B,MAAM,WAAW,aAAa;IAC5B,MAAM,EAAE,UAAU,CAAA;IAClB,YAAY;IACZ,YAAY,EAAE,MAAM,CAAA;IACpB,YAAY;IACZ,aAAa,EAAE,MAAM,CAAA;IACrB,8BAA8B;IAC9B,SAAS,EAAE,MAAM,CAAA;IACjB,YAAY;IACZ,cAAc,EAAE,MAAM,CAAA;IACtB,cAAc;IACd,gBAAgB,EAAE,MAAM,CAAA;IACxB,YAAY;IACZ,WAAW,EAAE,MAAM,CAAA;CACpB;AAED,gCAAgC;AAChC,eAAO,MAAM,eAAe,EAAE,SAAS,gBAAgB,EAMtD,CAAA;AAWD;;;;;GAKG;AACH,wBAAgB,YAAY,CAAC,SAAS,EAAE,gBAAgB,EAAE,CAAC,EAAE,aAAa,GAAG,aAAa,CAuJzF"}