@elizaos/autonomous 2.0.0-alpha.73 → 2.0.0-alpha.74

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IERC1155.sol

@@ -1,105 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2;
-
-import "./IERC165.sol";
-
-/// @title ERC-1155 Multi Token Standard
-/// @dev See https://eips.ethereum.org/EIPS/eip-1155
-/// Note: The ERC-165 identifier for this interface is 0xd9b67a26.
-interface IERC1155 is IERC165 {
-    /// @dev
-    /// - Either `TransferSingle` or `TransferBatch` MUST emit when tokens are transferred, including zero value transfers as well as minting or burning (see "Safe Transfer Rules" section of the standard).
-    /// - The `_operator` argument MUST be the address of an account/contract that is approved to make the transfer (SHOULD be msg.sender).
-    /// - The `_from` argument MUST be the address of the holder whose balance is decreased.
-    /// - The `_to` argument MUST be the address of the recipient whose balance is increased.
-    /// - The `_id` argument MUST be the token type being transferred.
-    /// - The `_value` argument MUST be the number of tokens the holder balance is decreased by and match what the recipient balance is increased by.
-    /// - When minting/creating tokens, the `_from` argument MUST be set to `0x0` (i.e. zero address).
-    /// - When burning/destroying tokens, the `_to` argument MUST be set to `0x0` (i.e. zero address).
-    event TransferSingle(
-        address indexed _operator, address indexed _from, address indexed _to, uint256 _id, uint256 _value
-    );
-
-    /// @dev
-    /// - Either `TransferSingle` or `TransferBatch` MUST emit when tokens are transferred, including zero value transfers as well as minting or burning (see "Safe Transfer Rules" section of the standard).
-    /// - The `_operator` argument MUST be the address of an account/contract that is approved to make the transfer (SHOULD be msg.sender).
-    /// - The `_from` argument MUST be the address of the holder whose balance is decreased.
-    /// - The `_to` argument MUST be the address of the recipient whose balance is increased.
-    /// - The `_ids` argument MUST be the list of tokens being transferred.
-    /// - The `_values` argument MUST be the list of number of tokens (matching the list and order of tokens specified in _ids) the holder balance is decreased by and match what the recipient balance is increased by.
-    /// - When minting/creating tokens, the `_from` argument MUST be set to `0x0` (i.e. zero address).
-    /// - When burning/destroying tokens, the `_to` argument MUST be set to `0x0` (i.e. zero address).
-    event TransferBatch(
-        address indexed _operator, address indexed _from, address indexed _to, uint256[] _ids, uint256[] _values
-    );
-
-    /// @dev MUST emit when approval for a second party/operator address to manage all tokens for an owner address is enabled or disabled (absence of an event assumes disabled).
-    event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
-
-    /// @dev MUST emit when the URI is updated for a token ID. URIs are defined in RFC 3986.
-    /// The URI MUST point to a JSON file that conforms to the "ERC-1155 Metadata URI JSON Schema".
-    event URI(string _value, uint256 indexed _id);
-
-    /// @notice Transfers `_value` amount of an `_id` from the `_from` address to the `_to` address specified (with safety call).
-    /// @dev Caller must be approved to manage the tokens being transferred out of the `_from` account (see "Approval" section of the standard).
-    /// - MUST revert if `_to` is the zero address.
-    /// - MUST revert if balance of holder for token `_id` is lower than the `_value` sent.
-    /// - MUST revert on any other error.
-    /// - MUST emit the `TransferSingle` event to reflect the balance change (see "Safe Transfer Rules" section of the standard).
-    /// - After the above conditions are met, this function MUST check if `_to` is a smart contract (e.g. code size > 0). If so, it MUST call `onERC1155Received` on `_to` and act appropriately (see "Safe Transfer Rules" section of the standard).
-    /// @param _from Source address
-    /// @param _to Target address
-    /// @param _id ID of the token type
-    /// @param _value Transfer amount
-    /// @param _data Additional data with no specified format, MUST be sent unaltered in call to `onERC1155Received` on `_to`
-    function safeTransferFrom(address _from, address _to, uint256 _id, uint256 _value, bytes calldata _data) external;
-
-    /// @notice Transfers `_values` amount(s) of `_ids` from the `_from` address to the `_to` address specified (with safety call).
-    /// @dev Caller must be approved to manage the tokens being transferred out of the `_from` account (see "Approval" section of the standard).
-    /// - MUST revert if `_to` is the zero address.
-    /// - MUST revert if length of `_ids` is not the same as length of `_values`.
-    /// - MUST revert if any of the balance(s) of the holder(s) for token(s) in `_ids` is lower than the respective amount(s) in `_values` sent to the recipient.
-    /// - MUST revert on any other error.
-    /// - MUST emit `TransferSingle` or `TransferBatch` event(s) such that all the balance changes are reflected (see "Safe Transfer Rules" section of the standard).
-    /// - Balance changes and events MUST follow the ordering of the arrays (_ids[0]/_values[0] before _ids[1]/_values[1], etc).
-    /// - After the above conditions for the transfer(s) in the batch are met, this function MUST check if `_to` is a smart contract (e.g. code size > 0). If so, it MUST call the relevant `ERC1155TokenReceiver` hook(s) on `_to` and act appropriately (see "Safe Transfer Rules" section of the standard).
-    /// @param _from Source address
-    /// @param _to Target address
-    /// @param _ids IDs of each token type (order and length must match _values array)
-    /// @param _values Transfer amounts per token type (order and length must match _ids array)
-    /// @param _data Additional data with no specified format, MUST be sent unaltered in call to the `ERC1155TokenReceiver` hook(s) on `_to`
-    function safeBatchTransferFrom(
-        address _from,
-        address _to,
-        uint256[] calldata _ids,
-        uint256[] calldata _values,
-        bytes calldata _data
-    ) external;
-
-    /// @notice Get the balance of an account's tokens.
-    /// @param _owner The address of the token holder
-    /// @param _id ID of the token
-    /// @return The _owner's balance of the token type requested
-    function balanceOf(address _owner, uint256 _id) external view returns (uint256);
-
-    /// @notice Get the balance of multiple account/token pairs
-    /// @param _owners The addresses of the token holders
-    /// @param _ids ID of the tokens
-    /// @return The _owner's balance of the token types requested (i.e. balance for each (owner, id) pair)
-    function balanceOfBatch(address[] calldata _owners, uint256[] calldata _ids)
-        external
-        view
-        returns (uint256[] memory);
-
-    /// @notice Enable or disable approval for a third party ("operator") to manage all of the caller's tokens.
-    /// @dev MUST emit the ApprovalForAll event on success.
-    /// @param _operator Address to add to the set of authorized operators
-    /// @param _approved True if the operator is approved, false to revoke approval
-    function setApprovalForAll(address _operator, bool _approved) external;
-
-    /// @notice Queries the approval status of an operator for a given owner.
-    /// @param _owner The owner of the tokens
-    /// @param _operator Address of authorized operator
-    /// @return True if the operator is approved, false if not
-    function isApprovedForAll(address _owner, address _operator) external view returns (bool);
-}

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IERC165.sol

@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2;
-
-interface IERC165 {
-    /// @notice Query if a contract implements an interface
-    /// @param interfaceID The interface identifier, as specified in ERC-165
-    /// @dev Interface identification is specified in ERC-165. This function
-    /// uses less than 30,000 gas.
-    /// @return `true` if the contract implements `interfaceID` and
-    /// `interfaceID` is not 0xffffffff, `false` otherwise
-    function supportsInterface(bytes4 interfaceID) external view returns (bool);
-}

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IERC20.sol

@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2;
-
-/// @dev Interface of the ERC20 standard as defined in the EIP.
-/// @dev This includes the optional name, symbol, and decimals metadata.
-interface IERC20 {
-    /// @dev Emitted when `value` tokens are moved from one account (`from`) to another (`to`).
-    event Transfer(address indexed from, address indexed to, uint256 value);
-
-    /// @dev Emitted when the allowance of a `spender` for an `owner` is set, where `value`
-    /// is the new allowance.
-    event Approval(address indexed owner, address indexed spender, uint256 value);
-
-    /// @notice Returns the amount of tokens in existence.
-    function totalSupply() external view returns (uint256);
-
-    /// @notice Returns the amount of tokens owned by `account`.
-    function balanceOf(address account) external view returns (uint256);
-
-    /// @notice Moves `amount` tokens from the caller's account to `to`.
-    function transfer(address to, uint256 amount) external returns (bool);
-
-    /// @notice Returns the remaining number of tokens that `spender` is allowed
-    /// to spend on behalf of `owner`
-    function allowance(address owner, address spender) external view returns (uint256);
-
-    /// @notice Sets `amount` as the allowance of `spender` over the caller's tokens.
-    /// @dev Be aware of front-running risks: https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
-    function approve(address spender, uint256 amount) external returns (bool);
-
-    /// @notice Moves `amount` tokens from `from` to `to` using the allowance mechanism.
-    /// `amount` is then deducted from the caller's allowance.
-    function transferFrom(address from, address to, uint256 amount) external returns (bool);
-
-    /// @notice Returns the name of the token.
-    function name() external view returns (string memory);
-
-    /// @notice Returns the symbol of the token.
-    function symbol() external view returns (string memory);
-
-    /// @notice Returns the decimals places of the token.
-    function decimals() external view returns (uint8);
-}

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IERC4626.sol

@@ -1,190 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2;
-
-import "./IERC20.sol";
-
-/// @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
-/// https://eips.ethereum.org/EIPS/eip-4626
-interface IERC4626 is IERC20 {
-    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);
-
-    event Withdraw(
-        address indexed sender, address indexed receiver, address indexed owner, uint256 assets, uint256 shares
-    );
-
-    /// @notice Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
-    /// @dev
-    /// - MUST be an ERC-20 token contract.
-    /// - MUST NOT revert.
-    function asset() external view returns (address assetTokenAddress);
-
-    /// @notice Returns the total amount of the underlying asset that is “managed” by Vault.
-    /// @dev
-    /// - SHOULD include any compounding that occurs from yield.
-    /// - MUST be inclusive of any fees that are charged against assets in the Vault.
-    /// - MUST NOT revert.
-    function totalAssets() external view returns (uint256 totalManagedAssets);
-
-    /// @notice Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
-    /// scenario where all the conditions are met.
-    /// @dev
-    /// - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
-    /// - MUST NOT show any variations depending on the caller.
-    /// - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
-    /// “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
-    /// from.
-    function convertToShares(uint256 assets) external view returns (uint256 shares);
-
-    /// @notice Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
-    /// scenario where all the conditions are met.
-    /// @dev
-    /// - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
-    /// - MUST NOT show any variations depending on the caller.
-    /// - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
-    /// “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
-    /// from.
-    function convertToAssets(uint256 shares) external view returns (uint256 assets);
-
-    /// @notice Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
-    /// through a deposit call.
-    /// @dev
-    /// - MUST return a limited value if receiver is subject to some deposit limit.
-    /// - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
-    /// - MUST NOT revert.
-    function maxDeposit(address receiver) external view returns (uint256 maxAssets);
-
-    /// @notice Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
-    /// current on-chain conditions.
-    /// @dev
-    /// - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
-    ///   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
-    ///   in the same transaction.
-    /// - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
-    ///   deposit would be accepted, regardless if the user has enough tokens approved, etc.
-    /// - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
-    /// share price or some other type of condition, meaning the depositor will lose assets by depositing.
-    function previewDeposit(uint256 assets) external view returns (uint256 shares);
-
-    /// @notice Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
-    /// @dev
-    /// - MUST emit the Deposit event.
-    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-    ///   deposit execution, and are accounted for during deposit.
-    /// - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
-    ///   approving enough underlying tokens to the Vault contract, etc).
-    ///
-    /// NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
-    function deposit(uint256 assets, address receiver) external returns (uint256 shares);
-
-    /// @notice Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
-    /// @dev
-    /// - MUST return a limited value if receiver is subject to some mint limit.
-    /// - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
-    /// - MUST NOT revert.
-    function maxMint(address receiver) external view returns (uint256 maxShares);
-
-    /// @notice Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
-    /// current on-chain conditions.
-    /// @dev
-    /// - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
-    ///   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
-    ///   same transaction.
-    /// - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
-    ///   would be accepted, regardless if the user has enough tokens approved, etc.
-    /// - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
-    /// share price or some other type of condition, meaning the depositor will lose assets by minting.
-    function previewMint(uint256 shares) external view returns (uint256 assets);
-
-    /// @notice Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
-    /// @dev
-    /// - MUST emit the Deposit event.
-    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
-    ///   execution, and are accounted for during mint.
-    /// - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
-    ///   approving enough underlying tokens to the Vault contract, etc).
-    ///
-    /// NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
-    function mint(uint256 shares, address receiver) external returns (uint256 assets);
-
-    /// @notice Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
-    /// Vault, through a withdraw call.
-    /// @dev
-    /// - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
-    /// - MUST NOT revert.
-    function maxWithdraw(address owner) external view returns (uint256 maxAssets);
-
-    /// @notice Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
-    /// given current on-chain conditions.
-    /// @dev
-    /// - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
-    ///   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
-    ///   called
-    ///   in the same transaction.
-    /// - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
-    ///   the withdrawal would be accepted, regardless if the user has enough shares, etc.
-    /// - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
-    /// share price or some other type of condition, meaning the depositor will lose assets by depositing.
-    function previewWithdraw(uint256 assets) external view returns (uint256 shares);
-
-    /// @notice Burns shares from owner and sends exactly assets of underlying tokens to receiver.
-    /// @dev
-    /// - MUST emit the Withdraw event.
-    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-    ///   withdraw execution, and are accounted for during withdraw.
-    /// - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
-    ///   not having enough shares, etc).
-    ///
-    /// Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
-    /// Those methods should be performed separately.
-    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);
-
-    /// @notice Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
-    /// through a redeem call.
-    /// @dev
-    /// - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
-    /// - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
-    /// - MUST NOT revert.
-    function maxRedeem(address owner) external view returns (uint256 maxShares);
-
-    /// @notice Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
-    /// given current on-chain conditions.
-    /// @dev
-    /// - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
-    ///   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
-    ///   same transaction.
-    /// - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
-    ///   redemption would be accepted, regardless if the user has enough shares, etc.
-    /// - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
-    /// - MUST NOT revert.
-    ///
-    /// NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
-    /// share price or some other type of condition, meaning the depositor will lose assets by redeeming.
-    function previewRedeem(uint256 shares) external view returns (uint256 assets);
-
-    /// @notice Burns exactly shares from owner and sends assets of underlying tokens to receiver.
-    /// @dev
-    /// - MUST emit the Withdraw event.
-    /// - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-    ///   redeem execution, and are accounted for during redeem.
-    /// - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
-    ///   not having enough shares, etc).
-    ///
-    /// NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
-    /// Those methods should be performed separately.
-    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
-}

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IERC721.sol

@@ -1,164 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2;
-
-import "./IERC165.sol";
-
-/// @title ERC-721 Non-Fungible Token Standard
-/// @dev See https://eips.ethereum.org/EIPS/eip-721
-/// Note: the ERC-165 identifier for this interface is 0x80ac58cd.
-interface IERC721 is IERC165 {
-    /// @dev This emits when ownership of any NFT changes by any mechanism.
-    /// This event emits when NFTs are created (`from` == 0) and destroyed
-    /// (`to` == 0). Exception: during contract creation, any number of NFTs
-    /// may be created and assigned without emitting Transfer. At the time of
-    /// any transfer, the approved address for that NFT (if any) is reset to none.
-    event Transfer(address indexed _from, address indexed _to, uint256 indexed _tokenId);
-
-    /// @dev This emits when the approved address for an NFT is changed or
-    /// reaffirmed. The zero address indicates there is no approved address.
-    /// When a Transfer event emits, this also indicates that the approved
-    /// address for that NFT (if any) is reset to none.
-    event Approval(address indexed _owner, address indexed _approved, uint256 indexed _tokenId);
-
-    /// @dev This emits when an operator is enabled or disabled for an owner.
-    /// The operator can manage all NFTs of the owner.
-    event ApprovalForAll(address indexed _owner, address indexed _operator, bool _approved);
-
-    /// @notice Count all NFTs assigned to an owner
-    /// @dev NFTs assigned to the zero address are considered invalid, and this
-    /// function throws for queries about the zero address.
-    /// @param _owner An address for whom to query the balance
-    /// @return The number of NFTs owned by `_owner`, possibly zero
-    function balanceOf(address _owner) external view returns (uint256);
-
-    /// @notice Find the owner of an NFT
-    /// @dev NFTs assigned to zero address are considered invalid, and queries
-    /// about them do throw.
-    /// @param _tokenId The identifier for an NFT
-    /// @return The address of the owner of the NFT
-    function ownerOf(uint256 _tokenId) external view returns (address);
-
-    /// @notice Transfers the ownership of an NFT from one address to another address
-    /// @dev Throws unless `msg.sender` is the current owner, an authorized
-    /// operator, or the approved address for this NFT. Throws if `_from` is
-    /// not the current owner. Throws if `_to` is the zero address. Throws if
-    /// `_tokenId` is not a valid NFT. When transfer is complete, this function
-    /// checks if `_to` is a smart contract (code size > 0). If so, it calls
-    /// `onERC721Received` on `_to` and throws if the return value is not
-    /// `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`.
-    /// @param _from The current owner of the NFT
-    /// @param _to The new owner
-    /// @param _tokenId The NFT to transfer
-    /// @param data Additional data with no specified format, sent in call to `_to`
-    function safeTransferFrom(address _from, address _to, uint256 _tokenId, bytes calldata data) external payable;
-
-    /// @notice Transfers the ownership of an NFT from one address to another address
-    /// @dev This works identically to the other function with an extra data parameter,
-    /// except this function just sets data to "".
-    /// @param _from The current owner of the NFT
-    /// @param _to The new owner
-    /// @param _tokenId The NFT to transfer
-    function safeTransferFrom(address _from, address _to, uint256 _tokenId) external payable;
-
-    /// @notice Transfer ownership of an NFT -- THE CALLER IS RESPONSIBLE
-    /// TO CONFIRM THAT `_to` IS CAPABLE OF RECEIVING NFTS OR ELSE
-    /// THEY MAY BE PERMANENTLY LOST
-    /// @dev Throws unless `msg.sender` is the current owner, an authorized
-    /// operator, or the approved address for this NFT. Throws if `_from` is
-    /// not the current owner. Throws if `_to` is the zero address. Throws if
-    /// `_tokenId` is not a valid NFT.
-    /// @param _from The current owner of the NFT
-    /// @param _to The new owner
-    /// @param _tokenId The NFT to transfer
-    function transferFrom(address _from, address _to, uint256 _tokenId) external payable;
-
-    /// @notice Change or reaffirm the approved address for an NFT
-    /// @dev The zero address indicates there is no approved address.
-    /// Throws unless `msg.sender` is the current NFT owner, or an authorized
-    /// operator of the current owner.
-    /// @param _approved The new approved NFT controller
-    /// @param _tokenId The NFT to approve
-    function approve(address _approved, uint256 _tokenId) external payable;
-
-    /// @notice Enable or disable approval for a third party ("operator") to manage
-    /// all of `msg.sender`'s assets
-    /// @dev Emits the ApprovalForAll event. The contract MUST allow
-    /// multiple operators per owner.
-    /// @param _operator Address to add to the set of authorized operators
-    /// @param _approved True if the operator is approved, false to revoke approval
-    function setApprovalForAll(address _operator, bool _approved) external;
-
-    /// @notice Get the approved address for a single NFT
-    /// @dev Throws if `_tokenId` is not a valid NFT.
-    /// @param _tokenId The NFT to find the approved address for
-    /// @return The approved address for this NFT, or the zero address if there is none
-    function getApproved(uint256 _tokenId) external view returns (address);
-
-    /// @notice Query if an address is an authorized operator for another address
-    /// @param _owner The address that owns the NFTs
-    /// @param _operator The address that acts on behalf of the owner
-    /// @return True if `_operator` is an approved operator for `_owner`, false otherwise
-    function isApprovedForAll(address _owner, address _operator) external view returns (bool);
-}
-
-/// @dev Note: the ERC-165 identifier for this interface is 0x150b7a02.
-interface IERC721TokenReceiver {
-    /// @notice Handle the receipt of an NFT
-    /// @dev The ERC721 smart contract calls this function on the recipient
-    /// after a `transfer`. This function MAY throw to revert and reject the
-    /// transfer. Return of other than the magic value MUST result in the
-    /// transaction being reverted.
-    /// Note: the contract address is always the message sender.
-    /// @param _operator The address which called `safeTransferFrom` function
-    /// @param _from The address which previously owned the token
-    /// @param _tokenId The NFT identifier which is being transferred
-    /// @param _data Additional data with no specified format
-    /// @return `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
-    ///  unless throwing
-    function onERC721Received(address _operator, address _from, uint256 _tokenId, bytes calldata _data)
-        external
-        returns (bytes4);
-}
-
-/// @title ERC-721 Non-Fungible Token Standard, optional metadata extension
-/// @dev See https://eips.ethereum.org/EIPS/eip-721
-/// Note: the ERC-165 identifier for this interface is 0x5b5e139f.
-interface IERC721Metadata is IERC721 {
-    /// @notice A descriptive name for a collection of NFTs in this contract
-    function name() external view returns (string memory _name);
-
-    /// @notice An abbreviated name for NFTs in this contract
-    function symbol() external view returns (string memory _symbol);
-
-    /// @notice A distinct Uniform Resource Identifier (URI) for a given asset.
-    /// @dev Throws if `_tokenId` is not a valid NFT. URIs are defined in RFC
-    /// 3986. The URI may point to a JSON file that conforms to the "ERC721
-    /// Metadata JSON Schema".
-    function tokenURI(uint256 _tokenId) external view returns (string memory);
-}
-
-/// @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
-/// @dev See https://eips.ethereum.org/EIPS/eip-721
-/// Note: the ERC-165 identifier for this interface is 0x780e9d63.
-interface IERC721Enumerable is IERC721 {
-    /// @notice Count NFTs tracked by this contract
-    /// @return A count of valid NFTs tracked by this contract, where each one of
-    /// them has an assigned and queryable owner not equal to the zero address
-    function totalSupply() external view returns (uint256);
-
-    /// @notice Enumerate valid NFTs
-    /// @dev Throws if `_index` >= `totalSupply()`.
-    /// @param _index A counter less than `totalSupply()`
-    /// @return The token identifier for the `_index`th NFT,
-    /// (sort order not specified)
-    function tokenByIndex(uint256 _index) external view returns (uint256);
-
-    /// @notice Enumerate NFTs assigned to an owner
-    /// @dev Throws if `_index` >= `balanceOf(_owner)` or if
-    /// `_owner` is the zero address, representing invalid NFTs.
-    /// @param _owner An address where we are interested in NFTs owned by them
-    /// @param _index A counter less than `balanceOf(_owner)`
-    /// @return The token identifier for the `_index`th NFT assigned to `_owner`,
-    /// (sort order not specified)
-    function tokenOfOwnerByIndex(address _owner, uint256 _index) external view returns (uint256);
-}

package/test/contracts/lib/openzeppelin-contracts/lib/forge-std/src/interfaces/IMulticall3.sol

@@ -1,73 +0,0 @@
-// SPDX-License-Identifier: MIT
-pragma solidity >=0.6.2 <0.9.0;
-
-pragma experimental ABIEncoderV2;
-
-interface IMulticall3 {
-    struct Call {
-        address target;
-        bytes callData;
-    }
-
-    struct Call3 {
-        address target;
-        bool allowFailure;
-        bytes callData;
-    }
-
-    struct Call3Value {
-        address target;
-        bool allowFailure;
-        uint256 value;
-        bytes callData;
-    }
-
-    struct Result {
-        bool success;
-        bytes returnData;
-    }
-
-    function aggregate(Call[] calldata calls)
-        external
-        payable
-        returns (uint256 blockNumber, bytes[] memory returnData);
-
-    function aggregate3(Call3[] calldata calls) external payable returns (Result[] memory returnData);
-
-    function aggregate3Value(Call3Value[] calldata calls) external payable returns (Result[] memory returnData);
-
-    function blockAndAggregate(Call[] calldata calls)
-        external
-        payable
-        returns (uint256 blockNumber, bytes32 blockHash, Result[] memory returnData);
-
-    function getBasefee() external view returns (uint256 basefee);
-
-    function getBlockHash(uint256 blockNumber) external view returns (bytes32 blockHash);
-
-    function getBlockNumber() external view returns (uint256 blockNumber);
-
-    function getChainId() external view returns (uint256 chainid);
-
-    function getCurrentBlockCoinbase() external view returns (address coinbase);
-
-    function getCurrentBlockDifficulty() external view returns (uint256 difficulty);
-
-    function getCurrentBlockGasLimit() external view returns (uint256 gaslimit);
-
-    function getCurrentBlockTimestamp() external view returns (uint256 timestamp);
-
-    function getEthBalance(address addr) external view returns (uint256 balance);
-
-    function getLastBlockHash() external view returns (bytes32 blockHash);
-
-    function tryAggregate(bool requireSuccess, Call[] calldata calls)
-        external
-        payable
-        returns (Result[] memory returnData);
-
-    function tryBlockAndAggregate(bool requireSuccess, Call[] calldata calls)
-        external
-        payable
-        returns (uint256 blockNumber, bytes32 blockHash, Result[] memory returnData);
-}