@elizaos/autonomous 2.0.0-alpha.73 → 2.0.0-alpha.74

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC3156FlashBorrower.sol

@@ -1,29 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC3156FlashBorrower.sol)
-
-pragma solidity ^0.8.0;
-
-/**
- * @dev Interface of the ERC3156 FlashBorrower, as defined in
- * https://eips.ethereum.org/EIPS/eip-3156[ERC-3156].
- *
- * _Available since v4.1._
- */
-interface IERC3156FlashBorrower {
-    /**
-     * @dev Receive a flash loan.
-     * @param initiator The initiator of the loan.
-     * @param token The loan currency.
-     * @param amount The amount of tokens lent.
-     * @param fee The additional amount of tokens to repay.
-     * @param data Arbitrary data structure, intended to contain user-defined parameters.
-     * @return The keccak256 hash of "ERC3156FlashBorrower.onFlashLoan"
-     */
-    function onFlashLoan(
-        address initiator,
-        address token,
-        uint256 amount,
-        uint256 fee,
-        bytes calldata data
-    ) external returns (bytes32);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC3156FlashLender.sol

@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC3156FlashLender.sol)
-
-pragma solidity ^0.8.0;
-
-import "./IERC3156FlashBorrower.sol";
-
-/**
- * @dev Interface of the ERC3156 FlashLender, as defined in
- * https://eips.ethereum.org/EIPS/eip-3156[ERC-3156].
- *
- * _Available since v4.1._
- */
-interface IERC3156FlashLender {
-    /**
-     * @dev The amount of currency available to be lended.
-     * @param token The loan currency.
-     * @return The amount of `token` that can be borrowed.
-     */
-    function maxFlashLoan(address token) external view returns (uint256);
-
-    /**
-     * @dev The fee to be charged for a given loan.
-     * @param token The loan currency.
-     * @param amount The amount of tokens lent.
-     * @return The amount of `token` to be charged for the loan, on top of the returned principal.
-     */
-    function flashFee(address token, uint256 amount) external view returns (uint256);
-
-    /**
-     * @dev Initiate a flash loan.
-     * @param receiver The receiver of the tokens in the loan, and the receiver of the callback.
-     * @param token The loan currency.
-     * @param amount The amount of tokens lent.
-     * @param data Arbitrary data structure, intended to contain user-defined parameters.
-     */
-    function flashLoan(
-        IERC3156FlashBorrower receiver,
-        address token,
-        uint256 amount,
-        bytes calldata data
-    ) external returns (bool);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC4626.sol

@@ -1,232 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4626.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC20/IERC20.sol";
-import "../token/ERC20/extensions/IERC20Metadata.sol";
-
-/**
- * @dev Interface of the ERC4626 "Tokenized Vault Standard", as defined in
- * https://eips.ethereum.org/EIPS/eip-4626[ERC-4626].
- *
- * _Available since v4.7._
- */
-interface IERC4626 is IERC20, IERC20Metadata {
-    event Deposit(address indexed sender, address indexed owner, uint256 assets, uint256 shares);
-
-    event Withdraw(
-        address indexed sender,
-        address indexed receiver,
-        address indexed owner,
-        uint256 assets,
-        uint256 shares
-    );
-
-    /**
-     * @dev Returns the address of the underlying token used for the Vault for accounting, depositing, and withdrawing.
-     *
-     * - MUST be an ERC-20 token contract.
-     * - MUST NOT revert.
-     */
-    function asset() external view returns (address assetTokenAddress);
-
-    /**
-     * @dev Returns the total amount of the underlying asset that is “managed” by Vault.
-     *
-     * - SHOULD include any compounding that occurs from yield.
-     * - MUST be inclusive of any fees that are charged against assets in the Vault.
-     * - MUST NOT revert.
-     */
-    function totalAssets() external view returns (uint256 totalManagedAssets);
-
-    /**
-     * @dev Returns the amount of shares that the Vault would exchange for the amount of assets provided, in an ideal
-     * scenario where all the conditions are met.
-     *
-     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
-     * - MUST NOT show any variations depending on the caller.
-     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
-     * - MUST NOT revert.
-     *
-     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
-     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
-     * from.
-     */
-    function convertToShares(uint256 assets) external view returns (uint256 shares);
-
-    /**
-     * @dev Returns the amount of assets that the Vault would exchange for the amount of shares provided, in an ideal
-     * scenario where all the conditions are met.
-     *
-     * - MUST NOT be inclusive of any fees that are charged against assets in the Vault.
-     * - MUST NOT show any variations depending on the caller.
-     * - MUST NOT reflect slippage or other on-chain conditions, when performing the actual exchange.
-     * - MUST NOT revert.
-     *
-     * NOTE: This calculation MAY NOT reflect the “per-user” price-per-share, and instead should reflect the
-     * “average-user’s” price-per-share, meaning what the average user should expect to see when exchanging to and
-     * from.
-     */
-    function convertToAssets(uint256 shares) external view returns (uint256 assets);
-
-    /**
-     * @dev Returns the maximum amount of the underlying asset that can be deposited into the Vault for the receiver,
-     * through a deposit call.
-     *
-     * - MUST return a limited value if receiver is subject to some deposit limit.
-     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of assets that may be deposited.
-     * - MUST NOT revert.
-     */
-    function maxDeposit(address receiver) external view returns (uint256 maxAssets);
-
-    /**
-     * @dev Allows an on-chain or off-chain user to simulate the effects of their deposit at the current block, given
-     * current on-chain conditions.
-     *
-     * - MUST return as close to and no more than the exact amount of Vault shares that would be minted in a deposit
-     *   call in the same transaction. I.e. deposit should return the same or more shares as previewDeposit if called
-     *   in the same transaction.
-     * - MUST NOT account for deposit limits like those returned from maxDeposit and should always act as though the
-     *   deposit would be accepted, regardless if the user has enough tokens approved, etc.
-     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
-     * - MUST NOT revert.
-     *
-     * NOTE: any unfavorable discrepancy between convertToShares and previewDeposit SHOULD be considered slippage in
-     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
-     */
-    function previewDeposit(uint256 assets) external view returns (uint256 shares);
-
-    /**
-     * @dev Mints shares Vault shares to receiver by depositing exactly amount of underlying tokens.
-     *
-     * - MUST emit the Deposit event.
-     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-     *   deposit execution, and are accounted for during deposit.
-     * - MUST revert if all of assets cannot be deposited (due to deposit limit being reached, slippage, the user not
-     *   approving enough underlying tokens to the Vault contract, etc).
-     *
-     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
-     */
-    function deposit(uint256 assets, address receiver) external returns (uint256 shares);
-
-    /**
-     * @dev Returns the maximum amount of the Vault shares that can be minted for the receiver, through a mint call.
-     * - MUST return a limited value if receiver is subject to some mint limit.
-     * - MUST return 2 ** 256 - 1 if there is no limit on the maximum amount of shares that may be minted.
-     * - MUST NOT revert.
-     */
-    function maxMint(address receiver) external view returns (uint256 maxShares);
-
-    /**
-     * @dev Allows an on-chain or off-chain user to simulate the effects of their mint at the current block, given
-     * current on-chain conditions.
-     *
-     * - MUST return as close to and no fewer than the exact amount of assets that would be deposited in a mint call
-     *   in the same transaction. I.e. mint should return the same or fewer assets as previewMint if called in the
-     *   same transaction.
-     * - MUST NOT account for mint limits like those returned from maxMint and should always act as though the mint
-     *   would be accepted, regardless if the user has enough tokens approved, etc.
-     * - MUST be inclusive of deposit fees. Integrators should be aware of the existence of deposit fees.
-     * - MUST NOT revert.
-     *
-     * NOTE: any unfavorable discrepancy between convertToAssets and previewMint SHOULD be considered slippage in
-     * share price or some other type of condition, meaning the depositor will lose assets by minting.
-     */
-    function previewMint(uint256 shares) external view returns (uint256 assets);
-
-    /**
-     * @dev Mints exactly shares Vault shares to receiver by depositing amount of underlying tokens.
-     *
-     * - MUST emit the Deposit event.
-     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the mint
-     *   execution, and are accounted for during mint.
-     * - MUST revert if all of shares cannot be minted (due to deposit limit being reached, slippage, the user not
-     *   approving enough underlying tokens to the Vault contract, etc).
-     *
-     * NOTE: most implementations will require pre-approval of the Vault with the Vault’s underlying asset token.
-     */
-    function mint(uint256 shares, address receiver) external returns (uint256 assets);
-
-    /**
-     * @dev Returns the maximum amount of the underlying asset that can be withdrawn from the owner balance in the
-     * Vault, through a withdraw call.
-     *
-     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
-     * - MUST NOT revert.
-     */
-    function maxWithdraw(address owner) external view returns (uint256 maxAssets);
-
-    /**
-     * @dev Allows an on-chain or off-chain user to simulate the effects of their withdrawal at the current block,
-     * given current on-chain conditions.
-     *
-     * - MUST return as close to and no fewer than the exact amount of Vault shares that would be burned in a withdraw
-     *   call in the same transaction. I.e. withdraw should return the same or fewer shares as previewWithdraw if
-     *   called
-     *   in the same transaction.
-     * - MUST NOT account for withdrawal limits like those returned from maxWithdraw and should always act as though
-     *   the withdrawal would be accepted, regardless if the user has enough shares, etc.
-     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
-     * - MUST NOT revert.
-     *
-     * NOTE: any unfavorable discrepancy between convertToShares and previewWithdraw SHOULD be considered slippage in
-     * share price or some other type of condition, meaning the depositor will lose assets by depositing.
-     */
-    function previewWithdraw(uint256 assets) external view returns (uint256 shares);
-
-    /**
-     * @dev Burns shares from owner and sends exactly assets of underlying tokens to receiver.
-     *
-     * - MUST emit the Withdraw event.
-     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-     *   withdraw execution, and are accounted for during withdraw.
-     * - MUST revert if all of assets cannot be withdrawn (due to withdrawal limit being reached, slippage, the owner
-     *   not having enough shares, etc).
-     *
-     * Note that some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
-     * Those methods should be performed separately.
-     */
-    function withdraw(uint256 assets, address receiver, address owner) external returns (uint256 shares);
-
-    /**
-     * @dev Returns the maximum amount of Vault shares that can be redeemed from the owner balance in the Vault,
-     * through a redeem call.
-     *
-     * - MUST return a limited value if owner is subject to some withdrawal limit or timelock.
-     * - MUST return balanceOf(owner) if owner is not subject to any withdrawal limit or timelock.
-     * - MUST NOT revert.
-     */
-    function maxRedeem(address owner) external view returns (uint256 maxShares);
-
-    /**
-     * @dev Allows an on-chain or off-chain user to simulate the effects of their redeemption at the current block,
-     * given current on-chain conditions.
-     *
-     * - MUST return as close to and no more than the exact amount of assets that would be withdrawn in a redeem call
-     *   in the same transaction. I.e. redeem should return the same or more assets as previewRedeem if called in the
-     *   same transaction.
-     * - MUST NOT account for redemption limits like those returned from maxRedeem and should always act as though the
-     *   redemption would be accepted, regardless if the user has enough shares, etc.
-     * - MUST be inclusive of withdrawal fees. Integrators should be aware of the existence of withdrawal fees.
-     * - MUST NOT revert.
-     *
-     * NOTE: any unfavorable discrepancy between convertToAssets and previewRedeem SHOULD be considered slippage in
-     * share price or some other type of condition, meaning the depositor will lose assets by redeeming.
-     */
-    function previewRedeem(uint256 shares) external view returns (uint256 assets);
-
-    /**
-     * @dev Burns exactly shares from owner and sends assets of underlying tokens to receiver.
-     *
-     * - MUST emit the Withdraw event.
-     * - MAY support an additional flow in which the underlying tokens are owned by the Vault contract before the
-     *   redeem execution, and are accounted for during redeem.
-     * - MUST revert if all of shares cannot be redeemed (due to withdrawal limit being reached, slippage, the owner
-     *   not having enough shares, etc).
-     *
-     * NOTE: some implementations will require pre-requesting to the Vault before a withdrawal may be performed.
-     * Those methods should be performed separately.
-     */
-    function redeem(uint256 shares, address receiver, address owner) external returns (uint256 assets);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC4906.sol

@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC4906.sol)
-
-pragma solidity ^0.8.0;
-
-import "./IERC165.sol";
-import "./IERC721.sol";
-
-/// @title EIP-721 Metadata Update Extension
-interface IERC4906 is IERC165, IERC721 {
-    /// @dev This event emits when the metadata of a token is changed.
-    /// So that the third-party platforms such as NFT market could
-    /// timely update the images and related attributes of the NFT.
-    event MetadataUpdate(uint256 _tokenId);
-
-    /// @dev This event emits when the metadata of a range of tokens is changed.
-    /// So that the third-party platforms such as NFT market could
-    /// timely update the images and related attributes of the NFTs.
-    event BatchMetadataUpdate(uint256 _fromTokenId, uint256 _toTokenId);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC5267.sol

@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5267.sol)
-
-pragma solidity ^0.8.0;
-
-interface IERC5267 {
-    /**
-     * @dev MAY be emitted to signal that the domain could have changed.
-     */
-    event EIP712DomainChanged();
-
-    /**
-     * @dev returns the fields and values that describe the domain separator used by this contract for EIP-712
-     * signature.
-     */
-    function eip712Domain()
-        external
-        view
-        returns (
-            bytes1 fields,
-            string memory name,
-            string memory version,
-            uint256 chainId,
-            address verifyingContract,
-            bytes32 salt,
-            uint256[] memory extensions
-        );
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC5313.sol

@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5313.sol)
-
-pragma solidity ^0.8.0;
-
-/**
- * @dev Interface for the Light Contract Ownership Standard.
- *
- * A standardized minimal interface required to identify an account that controls a contract
- *
- * _Available since v4.9._
- */
-interface IERC5313 {
-    /**
-     * @dev Gets the address of the owner.
-     */
-    function owner() external view returns (address);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC5805.sol

@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC5805.sol)
-
-pragma solidity ^0.8.0;
-
-import "../governance/utils/IVotes.sol";
-import "./IERC6372.sol";
-
-interface IERC5805 is IERC6372, IVotes {}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC6372.sol

@@ -1,17 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/IERC6372.sol)
-
-pragma solidity ^0.8.0;
-
-interface IERC6372 {
-    /**
-     * @dev Clock used for flagging checkpoints. Can be overridden to implement timestamp based checkpoints (and voting).
-     */
-    function clock() external view returns (uint48);
-
-    /**
-     * @dev Description of the clock
-     */
-    // solhint-disable-next-line func-name-mixedcase
-    function CLOCK_MODE() external view returns (string memory);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC721.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC721/IERC721.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC721Enumerable.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Enumerable.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC721/extensions/IERC721Enumerable.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC721Metadata.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Metadata.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC721/extensions/IERC721Metadata.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC721Receiver.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC721Receiver.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC721/IERC721Receiver.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC777.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC777.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC777/IERC777.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC777Recipient.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC777Recipient.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC777/IERC777Recipient.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/IERC777Sender.sol

@@ -1,6 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts v4.4.1 (interfaces/IERC777Sender.sol)
-
-pragma solidity ^0.8.0;
-
-import "../token/ERC777/IERC777Sender.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/README.adoc

@@ -1,73 +0,0 @@
-= Interfaces
-
-[.readme-notice]
-NOTE: This document is better viewed at https://docs.openzeppelin.com/contracts/api/interfaces
-
-== List of standardized interfaces
-These interfaces are available as `.sol` files, and also as compiler `.json` ABI files (through the npm package). These
-are useful to interact with third party contracts that implement them.
-
-- {IERC20}
-- {IERC20Metadata}
-- {IERC165}
-- {IERC721}
-- {IERC721Receiver}
-- {IERC721Enumerable}
-- {IERC721Metadata}
-- {IERC777}
-- {IERC777Recipient}
-- {IERC777Sender}
-- {IERC1155}
-- {IERC1155Receiver}
-- {IERC1155MetadataURI}
-- {IERC1271}
-- {IERC1363}
-- {IERC1363Receiver}
-- {IERC1363Spender}
-- {IERC1820Implementer}
-- {IERC1820Registry}
-- {IERC1822Proxiable}
-- {IERC2612}
-- {IERC2981}
-- {IERC3156FlashLender}
-- {IERC3156FlashBorrower}
-- {IERC4626}
-- {IERC4906}
-- {IERC5267}
-- {IERC5313}
-- {IERC5805}
-- {IERC6372}
-
-== Detailed ABI
-
-{{IERC1271}}
-
-{{IERC1363}}
-
-{{IERC1363Receiver}}
-
-{{IERC1363Spender}}
-
-{{IERC1820Implementer}}
-
-{{IERC1820Registry}}
-
-{{IERC1822Proxiable}}
-
-{{IERC2612}}
-
-{{IERC2981}}
-
-{{IERC3156FlashLender}}
-
-{{IERC3156FlashBorrower}}
-
-{{IERC4626}}
-
-{{IERC5313}}
-
-{{IERC5267}}
-
-{{IERC5805}}
-
-{{IERC6372}}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/draft-IERC1822.sol

@@ -1,20 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.5.0) (interfaces/draft-IERC1822.sol)
-
-pragma solidity ^0.8.0;
-
-/**
- * @dev ERC1822: Universal Upgradeable Proxy Standard (UUPS) documents a method for upgradeability through a simplified
- * proxy whose upgrades are fully controlled by the current implementation.
- */
-interface IERC1822Proxiable {
-    /**
-     * @dev Returns the storage slot that the proxiable contract assumes is being used to store the implementation
-     * address.
-     *
-     * IMPORTANT: A proxy pointing at a proxiable contract should not be considered proxiable itself, because this risks
-     * bricking a proxy that upgrades to it, by delegating to itself until out of gas. Thus it is critical that this
-     * function revert if invoked through a proxy.
-     */
-    function proxiableUUID() external view returns (bytes32);
-}

package/test/contracts/lib/openzeppelin-contracts/contracts/interfaces/draft-IERC2612.sol

@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.0) (interfaces/draft-IERC2612.sol)
-
-pragma solidity ^0.8.0;
-
-// EIP-2612 is Final as of 2022-11-01. This file is deprecated.
-
-import "./IERC2612.sol";

package/test/contracts/lib/openzeppelin-contracts/contracts/metatx/ERC2771Context.sol

@@ -1,54 +0,0 @@
-// SPDX-License-Identifier: MIT
-// OpenZeppelin Contracts (last updated v4.9.4) (metatx/ERC2771Context.sol)
-
-pragma solidity ^0.8.9;
-
-import "../utils/Context.sol";
-
-/**
- * @dev Context variant with ERC2771 support.
- *
- * WARNING: The usage of `delegatecall` in this contract is dangerous and may result in context corruption.
- * Any forwarded request to this contract triggering a `delegatecall` to itself will result in an invalid {_msgSender}
- * recovery.
- */
-abstract contract ERC2771Context is Context {
-    /// @custom:oz-upgrades-unsafe-allow state-variable-immutable
-    address private immutable _trustedForwarder;
-
-    /// @custom:oz-upgrades-unsafe-allow constructor
-    constructor(address trustedForwarder) {
-        _trustedForwarder = trustedForwarder;
-    }
-
-    function isTrustedForwarder(address forwarder) public view virtual returns (bool) {
-        return forwarder == _trustedForwarder;
-    }
-
-    function _msgSender() internal view virtual override returns (address) {
-        uint256 calldataLength = msg.data.length;
-        uint256 contextSuffixLength = _contextSuffixLength();
-        if (isTrustedForwarder(msg.sender) && calldataLength >= contextSuffixLength) {
-            return address(bytes20(msg.data[calldataLength - contextSuffixLength:]));
-        } else {
-            return super._msgSender();
-        }
-    }
-
-    function _msgData() internal view virtual override returns (bytes calldata) {
-        uint256 calldataLength = msg.data.length;
-        uint256 contextSuffixLength = _contextSuffixLength();
-        if (isTrustedForwarder(msg.sender) && calldataLength >= contextSuffixLength) {
-            return msg.data[:calldataLength - contextSuffixLength];
-        } else {
-            return super._msgData();
-        }
-    }
-
-    /**
-     * @dev ERC-2771 specifies the context as being a single address (20 bytes).
-     */
-    function _contextSuffixLength() internal view virtual override returns (uint256) {
-        return 20;
-    }
-}