@eifi1/ui-kit 0.54.0 → 0.55.0

package/src/lib/table-text.ts

@@ -1,554 +0,0 @@
-/**
- * One lexer for "paste the table out of a spreadsheet", and the three rules for the
- * comma. `@eifi1/ui-kit/table-text` — pure functions over strings, no React.
- *
- * Moved here from Lenkbank (`shared/lib/parse-table.ts`), where three screens took a
- * table off somebody's clipboard — a measured-table grid, the text view beside it, and
- * a page that reads a recorder's setpoint/actual files — and each had grown its own
- * reader. They disagreed, and not in the harmless way: a whitespace-separated German
- * export was read as six columns of nonsense by two of them and as nothing at all by
- * the third, with no message either way. The lexing is one problem (lines, a
- * separator, fields, a header, numbers) and it is solved once here, so the next app
- * that imports a CSV does not write the comma rules wrong a second time.
- *
- * **What is genuinely different between callers is where the decision about the
- * comma is taken**, and that is a parameter rather than a constant. A comma is the
- * decimal mark in every German export and the column separator in every English CSV,
- * and no single rule serves both without regressing one of them. So the rules are
- * named instead of one being picked:
- *
- * * **`"whole-text"`** — the *file* door. A recorder writes one file in one
- *   convention, so the separator and the decimal mark are decided once, from the
- *   whole text, and stated back to the reader (`decimalComma`) where they can see
- *   what was assumed. Deciding once is what lets one damaged line be *counted*
- *   rather than re-guessed into a different convention than the lines around it.
- * * **`"per-line"`** — the *paste* door. What arrives on a clipboard is a few rows
- *   out of a spreadsheet, sometimes one row, sometimes a line somebody typed. There
- *   is no file to be consistent with, and a line must not change meaning because of
- *   another line somewhere else in the box — so each line is read on its own
- *   evidence.
- * * **unconditional** — one cell (`cellNumber` / `isCellNumber`). A single cell has
- *   no columns in it, so a comma in one cannot be separating anything and is always
- *   a decimal mark. That is not a table rule at all, which is why it is a pair of
- *   one-liners beside the others rather than an option on them.
- *
- * What this deliberately does not do:
- *
- * * **Thousands separators.** `1.234,5` and `1,234.5` are both a number with two
- *   marks in it, and telling the grouping mark from the decimal mark needs a rule
- *   about digit runs that would then have to be right for a three-digit integer
- *   too. A field carrying one is reported as a line that could not be read, with
- *   its line number, which is something a reader can act on. Guessing is not.
- * * **Empty cells.** An empty field is dropped rather than held open as a hole, so a
- *   row with a dropped channel in the middle of it shifts left. Keeping the hole
- *   would mean reading `1;2;3;` — a trailing separator, which every spreadsheet
- *   writes — as a four-column row. It is a known gap, not an oversight.
- * * **Quoted fields.** No `"a;b"` escaping. These are numbers; the only text in them
- *   is the header line, and a header field with a separator in it costs a column
- *   name, not a measurement.
- *
- * Both of those are the NUMERIC lexer's limits. A table whose cells are text — a bank
- * export, read for a column mapper — needs both, and {@link parseTextTable} (0.23) is
- * that door: empty cells held in place, quoted cells, and the same separator and comma
- * rules underneath.
- */
-
-/** A digit, a comma, a digit — a comma that can only be a decimal mark or a
- *  grouping mark, never a separator with a number on each side of it. `1, 2`
- *  deliberately does not match: a comma followed by a space is how a human
- *  writes a list, and reading it as a decimal mark would turn a hand-typed
- *  `1, 2, 3` into one number. */
-const DECIMAL_COMMA = /\d,\d/;
-
-/** What separates the columns of one line. A regular expression only for the
- *  whitespace case, because a run of spaces is one separator. */
-type Separator = string | RegExp;
-
-/** Where the decision about the comma is taken. See the module docstring: the
- *  file door decides once for the whole text, the paste door decides per line. */
-export type DecimalRule = "per-line" | "whole-text";
-
-export interface ParseTableOptions {
-  decimal: DecimalRule;
-  /**
-   * How many columns the caller already knows the table has. A grid with fixed
-   * columns knows its width before a number arrives: anything past it is sliced
-   * off — an export with a trailing timestamp column is not an error worth
-   * refusing — and a line with fewer is reported. Omitted where the width is the
-   * file's own answer.
-   */
-  columns?: number;
-  /**
-   * How many leading lines that are not rows of numbers may be a header.
-   * Default 1, the name row. {@link parseRows} passes 2, because a bench export
-   * writes the units on a second line under the names.
-   */
-  headerLines?: number;
-}
-
-export interface ParsedTable {
-  rows: number[][];
-  /** The first header line's fields — the column *names*. A units line under it
-   *  is absorbed and not returned: what a column is measured in is the caller's to
-   *  say (its column definitions), and a second list of strings here would be a
-   *  second answer to that. */
-  header: string[] | null;
-  /** Whether a comma was read as a decimal mark. Under `"per-line"` this is true
-   *  if any line was read that way, and it exists for the reader: a guess
-   *  nobody can see is a guess nobody can correct. */
-  decimalComma: boolean;
-  /** Line numbers — 1-based, counted in the text as it was handed over, blank
-   *  lines included — that held something which is not a row of numbers. A list
-   *  rather than a count, because one door names the first one and the other
-   *  counts them. */
-  skipped: number[];
-}
-
-/**
- * The columns of one line, as text, with the decimal mark normalised to a point.
- *
- * Text rather than numbers because a grid holds cells as strings: a pasted
- * field that is not a number belongs in the cell it landed in, marked, where the
- * person who pasted it can see which column went wrong. Dropping it here would
- * shift every column after it and lose the evidence.
- */
-export function splitRow(line: string): string[] {
-  const separator = separatorOf(line);
-  const decimalComma = separator !== ",";
-  return fieldsOf(line, separator).map((field) => (decimalComma ? point(field) : field));
-}
-
-/**
- * A pasted table, or the lines of it that are not one.
- *
- * The lexer both doors are built on. It reads lines, drops blanks and `#`
- * banners, decides what separates the columns, takes the header off the top and
- * converts what is left.
- */
-export function parseTable(text: string, options: ParseTableOptions): ParsedTable {
-  const headerLimit = options.headerLines ?? 1;
-  const lines = contentLines(text);
-  if (!lines.length) return { rows: [], header: null, decimalComma: false, skipped: [] };
-  const fixed = options.decimal === "whole-text" ? wholeTextRule(lines) : null;
-
-  let header: string[] | null = null;
-  let headerCount = 0;
-  const rows: number[][] = [];
-  const skipped: number[] = [];
-  let sawDecimalComma = false;
-
-  for (const { line, number } of lines) {
-    const separator = fixed ? fixed.separator : separatorOf(line);
-    const decimalComma = fixed ? fixed.decimalComma : separator !== ",";
-    const fields = fieldsOf(line, separator);
-    const numbers = fields.map((field) => Number(decimalComma ? point(field) : field));
-    const readable = fields.length > 0 && numbers.every(Number.isFinite);
-
-    if (!readable) {
-      // A header is only a header at the top, and only before any data: a stray
-      // word further down is a broken row, and dropping it silently would lose a
-      // measurement without saying so.
-      if (rows.length === 0 && headerCount < headerLimit) {
-        header ??= fields;
-        headerCount += 1;
-        continue;
-      }
-      skipped.push(number);
-      continue;
-    }
-    if (options.columns !== undefined && fields.length < options.columns) {
-      skipped.push(number);
-      continue;
-    }
-    if (decimalComma && DECIMAL_COMMA.test(line)) sawDecimalComma = true;
-    rows.push(options.columns === undefined ? numbers : numbers.slice(0, options.columns));
-  }
-
-  return {
-    rows,
-    header,
-    decimalComma: fixed ? fixed.decimalComma : sawDecimalComma,
-    skipped,
-  };
-}
-
-/**
- * The paste door: a fixed number of columns, and the line that stopped it.
- *
- * Read per line, with up to two header lines (names, then units). It answers with a
- * line number rather than with what it managed to read, because half a pasted
- * sweep saved as a measurement is worse than a refused paste — and because a
- * table that comes back **empty** is the one answer a reader cannot act on: it
- * looks exactly like a paste that did not happen. So text that has content and
- * produced no row at all is an error naming its first unreadable line, never
- * `{ rows: [] }`.
- */
-export function parseRows(text: string, columns: number): { rows: number[][] } | { error: number } {
-  const lines = contentLines(text);
-  if (!lines.length) return { rows: [] };
-  const parsed = parseTable(text, { decimal: "per-line", columns, headerLines: 2 });
-  if (parsed.skipped.length) return { error: parsed.skipped[0] };
-  if (!parsed.rows.length) return { error: lines[0].number };
-  return { rows: parsed.rows };
-}
-
-/** One cell as a number. Unconditional: a cell has no columns in it, so a comma
- *  in one is a decimal mark and nothing else. */
-export const cellNumber = (cell: string) => Number(cell.replace(",", "."));
-
-/** Whether one cell holds a number yet. An empty cell is not one — it is a hole
- *  in the measurement, which is a different thing from a zero. */
-export const isCellNumber = (cell: string) => cell.trim() !== "" && !Number.isNaN(cellNumber(cell));
-
-/**
- * The one separator and the one decimal mark a whole file is read with.
- *
- * The separator is taken from the line most likely to be data — the second,
- * where there is one, because the first is usually the names.
- *
- * A comma between two digits is then a decimal mark whenever something else is
- * already separating the columns: there is nothing else it could be. The rule
- * this replaces also demanded that no decimal POINT appear anywhere in the file,
- * which read a semicolon-separated export with one column written by a different
- * tool — an entirely ordinary thing for a bench to produce — as a table with no
- * rows in it, and said nothing.
- */
-function wholeTextRule(lines: { line: string }[]): { separator: Separator; decimalComma: boolean } {
-  const separator = separatorOf(lines[lines.length > 1 ? 1 : 0].line);
-  const body = lines.map((entry) => entry.line).join("\n");
-  return { separator, decimalComma: separator !== "," && DECIMAL_COMMA.test(body) };
-}
-
-/** Lines with something on them, numbered as they stand in the original text so
- *  a message can point at one. `#` banners are a recorder's, not a measurement. */
-function contentLines(text: string): { line: string; number: number }[] {
-  return text
-    .split(/\r?\n/)
-    .map((line, index) => ({ line: line.trim(), number: index + 1 }))
-    .filter(({ line }) => line !== "" && !line.startsWith("#"));
-}
-
-/**
- * What separates this line's columns.
- *
- * In order of trust, not of count: a semicolon-separated line with decimal
- * commas has more commas than semicolons, and a tab-separated one may have both.
- * Whichever of tab and semicolon appears wins outright, because neither is ever
- * anything but a separator.
- *
- * The comma is the one that has to be argued about. A line that has whitespace
- * between its fields *and* a comma between two digits has already said what
- * separates it — so the comma is a decimal mark, and the whitespace separates.
- * That is a German export printed or dumped from MATLAB (`0,5 1,25 2,75`), and
- * reading its commas as separators produced six columns from three: each number
- * split into a pair of small integers, accepted as a row, and saved as a
- * measurement with nothing on screen to say so. A comma with a space after it is
- * not that shape (`DECIMAL_COMMA` does not match `1, 2`), so a hand-typed list
- * still separates on the comma.
- */
-function separatorOf(line: string): Separator {
-  if (line.includes("\t")) return "\t";
-  if (line.includes(";")) return ";";
-  if (line.includes(",")) return /\s/.test(line) && DECIMAL_COMMA.test(line) ? /\s+/ : ",";
-  return /\s+/;
-}
-
-/** One line into trimmed, non-empty fields, as they were written. The header is
- *  returned out of these, so a column called `Weg,X` keeps its name even where
- *  the numbers under it are being read with a decimal comma. */
-function fieldsOf(line: string, separator: Separator): string[] {
-  return line
-    .split(separator)
-    .map((field) => field.trim())
-    .filter((field) => field !== "");
-}
-
-/** The decimal mark this language of `Number` understands. One comma, because a
- *  field with two of them is a grouped number and this module does not read
- *  those — it reports the line instead. */
-const point = (field: string) => field.replace(",", ".");
-
-// ── A table of text ────────────────────────────────────────────────────────────
-
-/**
- * What separates the columns of a {@link TextTable}, named. `" "` is a run of
- * whitespace — one separator however many spaces or tabs it is made of — as in a
- * printed or MATLAB-dumped table.
- */
-export type TableSeparator = "\t" | ";" | "," | " ";
-
-/** One line of the text as it was handed over: its 1-based number (blank lines
- *  counted, so a reader can count to it in the box they pasted into) and its text,
- *  trimmed. */
-export interface TableLine {
-  line: number;
-  text: string;
-}
-
-export interface ParseTextTableOptions {
-  /** The separator, decided by the caller — a "separated by" override, a format
-   *  the app already knows. Default: detected (see {@link parseTextTable}). */
-  separator?: TableSeparator;
-  /** Whether a comma between two digits is a decimal mark. Default: the
-   *  `"whole-text"` rule, decided once for the file. */
-  decimalComma?: boolean;
-  /** Whether the table's first line names its columns. Default: detected — a
-   *  word over a column of values ("Amount" over `-12,50`) is a header. */
-  header?: boolean;
-}
-
-/**
- * A table read as text: every cell a string, as written.
- *
- * The *file* door's decisions, for a table that is not only numbers. Everything a
- * reader has to know to trust it is in the answer — the separator and the decimal
- * mark that were assumed, and the lines that were not read, with their number and
- * their text — because a guess nobody can see is a guess nobody can correct.
- */
-export interface TextTable {
-  /** The first line's cells, when it names the columns; `null` when it is data. */
-  header: string[] | null;
-  /** Each read row, `width` cells long. An empty cell is `""`, kept in its place. */
-  rows: string[][];
-  /** Where each row came from — row-aligned with `rows`. */
-  lines: TableLine[];
-  /** How many columns the table has. */
-  width: number;
-  separator: TableSeparator;
-  /** Whether a comma is this table's decimal mark — the convention its numbers are
-   *  written in, to read them with {@link tableNumber} and to say back to the reader. */
-  decimalComma: boolean;
-  /** Lines that are not a row of this table: a title above it, a total under it, a
-   *  row with a cell too many or too few. */
-  unread: TableLine[];
-}
-
-/**
- * A pasted or dropped table, read as text — the lexer's file door for a table whose
- * cells are not all numbers (a bank export: a date, a payee, an amount), and the
- * parse under {@link ColumnMapper}.
- *
- * Moved under the same roof as {@link parseTable} because it has the same three
- * questions — what separates the columns, what the comma is, whether the first
- * line is a header — and answering them a second time somewhere else is how the
- * three readers this module replaced came to disagree. Kurvenschmiede's columns
- * input and keksdose's bank-file import both read a table whose columns the reader
- * then assigns, and both state what was assumed; this is that reading, once.
- *
- * Where it differs from {@link parseTable}, and why:
- *
- * * **Cells stay text.** Which cell is a number is the caller's question (its
- *   column roles), so nothing here converts. {@link tableNumber} reads one in the
- *   table's own convention.
- * * **An empty cell keeps its place.** A bank row with no memo has `;;` in it, and
- *   dropping that field — which the numeric lexer does — would move the amount into
- *   the memo's column. A trailing separator that ends most lines (`1;2;3;`, which
- *   spreadsheets write) is a line ending, not a column.
- * * **Quoted cells.** `"Example Ltd; branch 2"` is one cell, and `""` inside quotes
- *   is a quote. Text has separators in it where numbers never do. A quoted cell that
- *   runs over a line break is not joined — the line then has the wrong number of
- *   cells and is reported.
- * * **The width is the file's.** The column count most lines share. A line with
- *   another count is reported in `unread` rather than padded or cut: a row with a
- *   cell too many is a row whose columns have slid, and reading it would put a payee
- *   in the amount.
- * * **The separator is voted on**, over the first lines, rather than taken from the
- *   second: an export that opens with a title block (a bank's account name and
- *   period over the table) would otherwise be read with the title's separator.
- * * **The header is detected by its words.** The numeric lexer's rule — "a line
- *   that is not numbers" — cannot work where the rows are text too. A first line is
- *   a header when one of its cells is a word and every cell under it, as far as the
- *   first rows go, is a value (digits and the marks numbers and dates are written
- *   with): "Amount" over `-12,50`, "Date" over `01.02.2026`. A table of words only
- *   is read without one; `options.header` says otherwise.
- *
- * Blank lines and `#` banners are skipped, as by the numeric lexer.
- */
-export function parseTextTable(text: string, options: ParseTextTableOptions = {}): TextTable {
-  const content = textLines(text);
-  if (!content.length) {
-    return {
-      header: null,
-      rows: [],
-      lines: [],
-      width: 0,
-      separator: options.separator ?? ",",
-      decimalComma: false,
-      unread: [],
-    };
-  }
-  const separator = options.separator ?? votedSeparator(content);
-  const decimalComma =
-    options.decimalComma ?? (separator !== "," && DECIMAL_COMMA.test(content.map((entry) => entry.line).join("\n")));
-
-  // A trailing separator is a line ending only where it is the file's habit: in a
-  // file where most lines end in one. Elsewhere it closes an empty last cell.
-  const trailing =
-    separator !== " " && content.filter(({ line }) => line.endsWith(separator)).length * 2 > content.length;
-  const split = content.map(({ line, number }) => {
-    const cells = cellsOf(line, separator);
-    if (trailing && line.endsWith(separator) && cells[cells.length - 1] === "") cells.pop();
-    return { cells, entry: { line: number, text: line } };
-  });
-
-  const width = commonWidth(split.map(({ cells }) => cells.length));
-  const first = split.findIndex(({ cells }) => cells.length === width);
-  const unread: TableLine[] = split.slice(0, first).map(({ entry }) => entry);
-  const body = split.slice(first);
-  const fitting = body.filter(({ cells }) => cells.length === width);
-  const header =
-    options.header ??
-    looksLikeHeader(
-      fitting[0].cells,
-      fitting.slice(1, 21).map(({ cells }) => cells),
-    );
-
-  const rows: string[][] = [];
-  const lines: TableLine[] = [];
-  body.forEach(({ cells, entry }, index) => {
-    if (index === 0 && header) return;
-    if (cells.length !== width) {
-      unread.push(entry);
-      return;
-    }
-    rows.push(cells);
-    lines.push(entry);
-  });
-
-  return { header: header ? body[0].cells : null, rows, lines, width, separator, decimalComma, unread };
-}
-
-/**
- * One cell of a {@link TextTable} as a number, read in the table's convention.
- *
- * Not {@link cellNumber}, which reads every comma as a decimal mark — right for a
- * cell typed on its own, wrong for a cell of a file written with decimal points,
- * where `1,234` is a grouped thousand and reading it as 1.234 would be off by a
- * factor of a thousand without a word. Here a comma is a decimal mark only in a
- * table whose convention it is, and a cell with both marks is `NaN` either way: the
- * lexer does not read grouped numbers, it reports them. An empty cell is `NaN` too —
- * a hole in the table, not a zero.
- */
-export function tableNumber(cell: string, decimalComma: boolean): number {
-  const trimmed = cell.trim();
-  if (trimmed === "") return Number.NaN;
-  return Number(decimalComma ? point(trimmed) : trimmed);
-}
-
-const SEPARATOR_TRUST: readonly TableSeparator[] = ["\t", ";", ",", " "];
-
-/** {@link contentLines} for a table of text: spaces come off the ends, but a TAB
- *  stays — in a tab-separated export a leading tab is an empty first cell, and
- *  trimming it would slide the whole row one column to the left. */
-function textLines(text: string): { line: string; number: number }[] {
-  return text
-    .split(/\r?\n/)
-    .map((line, index) => ({ line: line.replace(/^ +| +$/g, ""), number: index + 1 }))
-    .filter(({ line }) => line.trim() !== "" && !line.trimStart().startsWith("#"));
-}
-
-/** The separator most of the first lines are written with — a title block above the
- *  table loses the vote to the table under it. A tie goes to the more trusted one. */
-function votedSeparator(lines: { line: string }[]): TableSeparator {
-  const votes = new Map<TableSeparator, number>();
-  for (const { line } of lines.slice(0, 50)) {
-    const found = separatorOf(withoutQuoted(line));
-    const named: TableSeparator = typeof found === "string" ? (found as TableSeparator) : " ";
-    votes.set(named, (votes.get(named) ?? 0) + 1);
-  }
-  let best: TableSeparator = SEPARATOR_TRUST[0];
-  let bestCount = -1;
-  for (const candidate of SEPARATOR_TRUST) {
-    const count = votes.get(candidate) ?? 0;
-    if (count > bestCount) {
-      best = candidate;
-      bestCount = count;
-    }
-  }
-  return best;
-}
-
-/** A line with its quoted parts emptied, so a separator inside quotes does not vote. */
-const withoutQuoted = (line: string) => line.replace(/"(?:[^"]|"")*"/g, '""');
-
-/**
- * One line into cells: trimmed, quotes taken off, empty cells kept in their place.
- * A run of whitespace is one separator and makes no empty cells.
- */
-function cellsOf(line: string, separator: TableSeparator): string[] {
-  if (separator === " ")
-    return line
-      .split(/\s+/)
-      .filter((field) => field !== "")
-      .map(unquote);
-  const cells: string[] = [];
-  let cell = "";
-  let quoted = false;
-  let started = false;
-  for (let index = 0; index < line.length; index += 1) {
-    const char = line[index];
-    if (quoted) {
-      if (char === '"' && line[index + 1] === '"') {
-        cell += '"';
-        index += 1;
-      } else if (char === '"') {
-        quoted = false;
-      } else {
-        cell += char;
-      }
-    } else if (char === separator) {
-      cells.push(cell.trim());
-      cell = "";
-      started = false;
-    } else if (char === '"' && !started) {
-      quoted = true;
-      started = true;
-      cell = "";
-    } else {
-      if (char.trim() !== "") started = true;
-      cell += char;
-    }
-  }
-  cells.push(cell.trim());
-  return cells;
-}
-
-/** A whitespace-separated field with its quotes off. */
-function unquote(field: string): string {
-  return field.length >= 2 && field.startsWith('"') && field.endsWith('"')
-    ? field.slice(1, -1).replace(/""/g, '"')
-    : field;
-}
-
-/** The column count most lines share; a tie goes to the wider table. */
-function commonWidth(counts: number[]): number {
-  const tally = new Map<number, number>();
-  for (const count of counts) tally.set(count, (tally.get(count) ?? 0) + 1);
-  let width = 0;
-  let best = 0;
-  for (const [count, times] of tally) {
-    if (times > best || (times === best && count > width)) {
-      width = count;
-      best = times;
-    }
-  }
-  return width;
-}
-
-/** A cell with a letter in it — a name, not a value. */
-const isWord = (cell: string) => /\p{L}/u.test(cell);
-/** A cell made of digits and the marks numbers, dates and times are written with. */
-const isValue = (cell: string) => /\d/.test(cell) && !isWord(cell);
-
-/**
- * Whether a first line names the columns under it. A word over a column of values
- * says so; with no rows to compare against, a line of words alone does.
- */
-function looksLikeHeader(first: string[], below: string[][]): boolean {
-  if (!below.length) return first.some((cell) => cell !== "") && first.every((cell) => cell === "" || isWord(cell));
-  return first.some((cell, column) => {
-    if (!isWord(cell)) return false;
-    const values = below.map((row) => row[column]).filter((value) => value !== "");
-    return values.length > 0 && values.every(isValue);
-  });
-}

package/src/lib/text-case.ts

@@ -1,19 +0,0 @@
-/**
- * Upper-case the first letter only, in `locale` — the one copy of the rule (refactor audit
- * 2026-10-30, DUP-11: MonthPicker and JumpCalendar each had it, and MiniCalendar's caption
- * still used the CSS `capitalize` it was written against).
- *
- * Several locales (fr, es, it, pt, …) write month names in lower case, which at the head
- * of a field or a panel reads as a typo. But only the FIRST letter is ours to change:
- * `capitalize` upper-cases every word, so Spanish read "Septiembre De 2026", and a
- * caption that does not start with the month kept its wrong capital — Hungarian read
- * "2026. Szeptember". This gives "Septiembre de 2026" and "2026. szeptember".
- *
- * In `locale` because the case mapping is the language's: Turkish upper-cases "i" to "İ".
- * `undefined` is the runtime's default, as everywhere `Intl` takes one.
- *
- * Package-private — not re-exported from the barrel.
- */
-export function upperFirst(text: string, locale: string | undefined): string {
-  return text.charAt(0).toLocaleUpperCase(locale) + text.slice(1);
-}