@cortexkit/opencode-antigravity-auth 2.2.1 → 3.0.1

package/src/common-auth-embedded/opencode2/types.d.ts

@@ -0,0 +1,413 @@
+import type { Plugin } from '@opencode/plugin';
+import type { SessionRequestKind, SessionRetryDecision } from '@opencode/plugin/promise/session';
+/** The parts of the OpenCode 2 plugin context the installer uses. */
+export type OpenCode2HookContext = {
+    readonly session: Pick<Plugin.Context['session'], 'hook'>;
+    /** Used only to forget per-session records when a session is deleted. */
+    readonly event?: Pick<Plugin.Context['event'], 'subscribe'>;
+};
+export type RequestKind = SessionRequestKind;
+/** Which request a hook call belongs to, as the host reports it. */
+export interface RequestScope {
+    readonly providerID: string;
+    readonly modelID: string;
+    readonly sessionID: string;
+    readonly agent: string;
+    readonly kind: RequestKind;
+}
+/** Where a reading or a refusal was seen. */
+export type Transport = 'http' | 'ws';
+/**
+ * A provider refusal that should move the request to another account: a rate
+ * limit, an exhausted usage window, or anything else the adapter decides is
+ * tied to the account rather than to the request.
+ */
+export interface LimitSignal {
+    /** Short machine-readable reason, such as the provider's error code. */
+    readonly reason: string;
+    readonly status?: number;
+    /** How long the provider asked the account to wait, when it said. */
+    readonly retryAfterMs?: number;
+}
+/** What the adapter learned from one streamed event or WebSocket frame. */
+export interface EventVerdict<Q> {
+    /** The user has seen output from this response: a retry would repeat it. */
+    readonly outputStarted?: boolean;
+    readonly quota?: Q;
+    readonly limit?: LimitSignal;
+    /**
+     * This is the last event of the response (completed or failed); the
+     * attempt ends here. On WebSocket this is the only way an attempt ends
+     * normally, because the socket stays open between responses.
+     */
+    readonly done?: boolean;
+    /**
+     * The response failed with this message. Ends the attempt with
+     * `error.reason` `failed`; implies `done`.
+     */
+    readonly error?: string;
+}
+/**
+ * Header changes for one account. A string sets the header (replacing every
+ * spelling of its name); `null` removes it.
+ */
+export type HeaderEdits = Readonly<Record<string, string | null>>;
+export interface ChooseAccountInput extends RequestScope {
+    /**
+     * The account of the attempt this one retries, when the retry hook just
+     * asked the host to retry an attempt of this session and kind; otherwise
+     * the account of the newest attempt of this session and kind.
+     */
+    readonly previousAccountId?: string;
+    /**
+     * Set when the attempt this one retries was refused for a limit before any
+     * output and the retry hook asked the host to try again. The adapter
+     * should not pick `accountId` again unless it has nothing else.
+     */
+    readonly rerouteFrom?: {
+        readonly accountId: string;
+        readonly limit: LimitSignal;
+    };
+}
+export interface AccountRequest extends RequestScope {
+    readonly accountId: string;
+}
+/**
+ * One physical send: created when an account is chosen for a request, and
+ * handed back on every hook call and event that belongs to that send, so a
+ * plugin can tie a response, a frame, a limit, a retry decision and the end
+ * of the send to the credential it chose for it.
+ *
+ * `A` is the plugin's own per-attempt value, returned by `accountHeaders`
+ * next to the headers (a served credential receipt, say); the installer
+ * only carries it.
+ */
+export interface Attempt<A = unknown> extends AccountRequest {
+    /** Unique within one installation. */
+    readonly attemptId: string;
+    /**
+     * The transport that carried the send. `undefined` until `http.request` or
+     * `experimental.ws.handshake` has run for it: an account chosen in
+     * `model.request` is chosen before the host has picked the transport.
+     */
+    readonly transport: Transport | undefined;
+    /**
+     * What `accountHeaders` returned as `attempt`, if anything, or what
+     * `answeredBy` replaced it with.
+     */
+    readonly data: A | undefined;
+    /**
+     * Set when `answeredBy` said another account answered this attempt's HTTP
+     * response: the account `chooseAccount` picked. `accountId` is then the
+     * account that answered, and everything from the response on is attributed
+     * to it.
+     */
+    readonly reboundFrom?: string;
+}
+/**
+ * The account that actually answered an HTTP response, as `answeredBy`
+ * reports it. `data`, when the key is present, replaces the attempt's `data`
+ * (the answering account's own credential receipt, say).
+ */
+export interface ResponseAccount<A = unknown> {
+    readonly accountId: string;
+    readonly data?: A;
+}
+/**
+ * Why an attempt ended without completing.
+ *
+ * - `failed`: the response stream errored, or the adapter's `inspectEvent`
+ *   reported the response as failed;
+ * - `cancelled`: the host cancelled the HTTP response body (the user stopped
+ *   the turn, say);
+ * - `abandoned`: the attempt can no longer be observed: it was on WebSocket
+ *   (or the retry hook had already judged it) when a newer attempt of the
+ *   same session and kind began, another attempt of its session and kind
+ *   went out over WebSocket, its session was forgotten, it was dropped for
+ *   space, or the installation was disposed. A WebSocket closed or cancelled
+ *   mid-response ends this way, since the host has no hook for either.
+ */
+export type AttemptEndReason = 'failed' | 'cancelled' | 'abandoned';
+/** How an attempt ended, as `onAttemptEnd` reports it. */
+export interface AttemptOutcome {
+    /** The HTTP status of the response, when an HTTP response was seen. */
+    readonly status?: number;
+    /** Output from this attempt had reached the user. */
+    readonly outputStarted: boolean;
+    /** The account-level refusal recorded for this attempt, if any. */
+    readonly limit?: LimitSignal;
+    /** Absent when the response completed, whatever its status. */
+    readonly error?: {
+        readonly reason: AttemptEndReason;
+        readonly message?: string;
+    };
+}
+/**
+ * `accountHeaders` may return the header edits alone, or the edits together
+ * with a per-attempt value that the installer hands back in
+ * `Attempt.data`.
+ */
+export interface AccountHeadersResult<A = unknown> {
+    readonly headers: HeaderEdits;
+    readonly attempt?: A;
+}
+/** A host-supplied error, as the retry hook reports it. */
+export interface HostError {
+    readonly type: string;
+    readonly message: string;
+    readonly status?: number;
+}
+/**
+ * Everything provider-specific the installer needs. `Q` is the plugin's own
+ * quota reading type; the installer only carries it to the `quota` event.
+ * `A` is the plugin's per-attempt value (see `Attempt`).
+ */
+export interface OpenCode2AuthAdapter<Q = unknown, A = unknown> {
+    /** Every hook is scoped to this provider; other providers are untouched. */
+    readonly providerID: string;
+    /**
+     * Picks the account for one model request. Called again for every retry,
+     * so a refused account can be skipped. Returning `undefined` stops the
+     * request with `OpenCode2AuthError` kind `no-account`.
+     */
+    chooseAccount(input: ChooseAccountInput): Promise<string | undefined> | string | undefined;
+    /**
+     * The credential and per-account headers for an account, applied in
+     * `model.request`, `http.request` and `experimental.ws.handshake`. The last
+     * two run after the host has applied its own credential, so these headers
+     * win on the wire. With `gateOnPlaceholder`, only the transport hook applies
+     * them, and only to owned requests. Put per-account and session headers here
+     * rather than in a separate `model.request` hook.
+     *
+     * Called once per attempt, when the account is chosen. Returning
+     * `{headers, attempt}` instead of the bare edits stores `attempt` as the
+     * attempt's `data`, handed back on everything that belongs to the attempt.
+     */
+    accountHeaders(input: AccountRequest): Promise<HeaderEdits | AccountHeadersResult<A>> | HeaderEdits | AccountHeadersResult<A>;
+    /**
+     * Optional request rewrite (URL, body) before the account headers are
+     * applied. Return `undefined` to keep the request. With `gateOnPlaceholder`,
+     * runs only for owned requests; move endpoint and body edits here rather
+     * than changing `model.request`.
+     */
+    rewriteRequest?(input: AccountRequest & {
+        readonly request: Request;
+        readonly attempt: Attempt<A>;
+    }): Promise<Request | undefined> | Request | undefined;
+    /**
+     * Optional response rewrite (body stream, status). It receives the
+     * response after quota, limit and output detection have been attached, so
+     * detection always sees the provider's own events.
+     */
+    rewriteResponse?(input: AccountRequest & {
+        readonly request: Request;
+        readonly response: Response;
+        readonly attempt: Attempt<A>;
+    }): Promise<Response | undefined> | Response | undefined;
+    /**
+     * Optional. For an adapter whose own sender can move a request to another
+     * account after `rewriteRequest` (a bridge that answers a 401 or 403 by
+     * retrying on the next account, say): runs first in `http.response`,
+     * before quota, refusal, output or end detection, and returns the account
+     * that actually answered, or `undefined` when the attempt's own account
+     * did. A different account rebinds the attempt to it (`Attempt.accountId`
+     * becomes that account and `reboundFrom` the one chosen), so the response's
+     * quota, refusal, stream events, end and any retry reroute are attributed
+     * to the answering account, once, and never to the chosen one. What the
+     * sender saw from the chosen account before it moved on (the 401 itself)
+     * never reaches the installer: the adapter accounts for it itself.
+     * Throwing ends the attempt as `failed` and fails the response hook.
+     */
+    answeredBy?(input: {
+        readonly request: Request;
+        readonly response: Response;
+        readonly attempt: Attempt<A>;
+    }): Promise<ResponseAccount<A> | undefined> | ResponseAccount<A> | undefined;
+    /**
+     * Optional WebSocket URL rewrite. With `gateOnPlaceholder`, runs only for
+     * handshakes whose prepared credential belongs to this plugin's login.
+     * Return `undefined` to keep the URL.
+     */
+    rewriteHandshakeURL?(input: AccountRequest & {
+        readonly url: string;
+        readonly attempt: Attempt<A>;
+    }): string | undefined;
+    /**
+     * Optional rewrite of each outgoing WebSocket frame of this provider,
+     * from `experimental.ws.send`. Return the frame to send, or `undefined` to
+     * send it unchanged.
+     *
+     * The rewrite must be a deterministic function of the frame (stable for
+     * the session): the host chains turns with `previous_response_id` by
+     * diffing its own request as it was before this hook ran, so the server
+     * only stays in step when every frame is rewritten the same way. Never
+     * alter, drop or reorder the `input` items the host put in the frame, and
+     * never touch `previous_response_id`: the host's next frame assumes the
+     * server holds exactly what it sent. Adding items to `input`, or adding or
+     * changing settings fields, keeps the host's order and continuation when
+     * done the same way for every frame: the added items become part of the
+     * server's history and the follow-up turn stays incremental.
+     *
+     * What inserting `input` items into every frame does not keep is the
+     * equivalence of the two ways a history reaches the server (settings
+     * fields carry no history, so they are not affected). Incrementally, each
+     * frame carries only
+     * the new items, so an item the rewrite inserts into every frame lands at
+     * every network boundary of the accumulated history. After a reconnect the
+     * host replays the whole history in one frame, and the same rewrite
+     * inserts that item once. The two server-side histories, and their cache
+     * prefixes, then differ. A rewrite that only adds or changes settings
+     * fields is unaffected. An adapter that inserts `input` items must show,
+     * for its own insertion, that the accumulated incremental history equals
+     * the rewritten full replay (including across tool loops), or accept the
+     * divergence and name what it costs (a cache miss and a different prompt
+     * after every reconnect).
+     *
+     * It runs for every frame, including one no attempt can be tied to
+     * (`attempt` is then `undefined`), so the rewrite never depends on
+     * attribution. With `gateOnPlaceholder`, it runs only after an owned
+     * handshake, including frames after that socket's attempt has ended.
+     */
+    rewriteWebSocketFrame?(input: RequestScope & {
+        readonly attempt: Attempt<A> | undefined;
+        readonly frame: string;
+    }): Promise<string | undefined> | string | undefined;
+    /** Quota carried in HTTP response headers. */
+    quotaFromHeaders?(headers: Headers, status: number, attempt: Attempt<A>): Q | undefined;
+    /**
+     * Recognises an account-level refusal from an HTTP response before its
+     * body is streamed. `body()` reads a copy, so the host still gets the body.
+     */
+    limitFromResponse?(input: {
+        readonly status: number;
+        readonly headers: Headers;
+        readonly body: () => Promise<string>;
+        readonly attempt: Attempt<A>;
+    }): Promise<LimitSignal | undefined> | LimitSignal | undefined;
+    /**
+     * Inspects one server-sent event (`data` payload) or one WebSocket frame.
+     * Detects output, quota, refusals and the end of the response inside the
+     * stream.
+     */
+    inspectEvent?(input: {
+        readonly transport: Transport;
+        readonly data: string;
+        readonly event?: string;
+        readonly attempt: Attempt<A>;
+    }): EventVerdict<Q> | undefined;
+    /**
+     * Recognises an account-level refusal from the error the host hands the
+     * retry hook, for refusals no other hook saw. `attempt` is the attempt
+     * the retry hook judged.
+     */
+    limitFromError?(error: HostError, attempt: Attempt<A>): LimitSignal | undefined;
+    /**
+     * Called once per attempt when it ends: an HTTP response body finished,
+     * errored or was cancelled; an HTTP response with an error status or no
+     * body arrived; an event's verdict said `done` or `error`; or the attempt
+     * was abandoned (see `AttemptEndReason`). Errors are logged and never
+     * reach the host. The retry hook waits for this call to settle before it
+     * decides, so a plugin that records a refusal here has it in place when
+     * `chooseAccount` runs again.
+     */
+    onAttemptEnd?(attempt: Attempt<A>, outcome: AttemptOutcome): Promise<void> | void;
+}
+export interface OpenCode2AuthLogger {
+    warn(message: string, data?: unknown): void;
+}
+export interface InstallOpenCode2AuthOptions {
+    /**
+     * Opt in to acting only on this plugin's login. Extract the request-bound
+     * prepared secret from the host's transport headers (not global connection
+     * state). The installer compares it byte for byte with
+     * `placeholderSecret(adapter.providerID)`; any other value passes untouched.
+     * `model.request` becomes a no-op; selection and rewrites happen at transport.
+     */
+    readonly gateOnPlaceholder?: {
+        readonly credential: (headers: Headers) => string | undefined;
+    };
+    /**
+     * Values that must never reach the wire, normally the placeholder the host
+     * holds as its credential. Defaults to the placeholder secret for the
+     * adapter's provider. With `gateOnPlaceholder`, that placeholder is always
+     * forbidden, even if this list is customized.
+     */
+    readonly hostCredentials?: readonly string[];
+    /** Most attempts kept before the oldest is abandoned and dropped. */
+    readonly maxRecords?: number;
+    readonly logger?: OpenCode2AuthLogger;
+}
+export type RetryReason = 'reroute' | 'output-started' | 'no-account' | 'host-decides';
+/**
+ * The hook that picked an account. Normally `model.request`; a transport hook
+ * picks only when the host skipped `model.request` for that request, which a
+ * plugin may want to log as a host change.
+ */
+export type SelectingHook = 'model.request' | 'http.request' | 'experimental.ws.handshake';
+/**
+ * Every event that belongs to one attempt carries it as `handle` (the
+ * `retry` event already uses `attempt` for the host's retry count).
+ */
+export interface OpenCode2AuthEvents<Q, A = unknown> {
+    /** An account was picked for a model request. */
+    readonly select: AccountRequest & {
+        readonly hook: SelectingHook;
+        readonly previousAccountId?: string;
+        readonly rerouteFrom?: ChooseAccountInput['rerouteFrom'];
+        readonly handle: Attempt<A>;
+    };
+    /** A quota reading, attributed through this installer's own record. */
+    readonly quota: AccountRequest & {
+        readonly transport: Transport;
+        readonly status?: number;
+        readonly quota: Q;
+        readonly handle: Attempt<A>;
+    };
+    /**
+     * An account-level refusal. The retry hook waits for every listener of
+     * this event before asking the host to retry, so a plugin that marks the
+     * account limited here has the mark in place when `chooseAccount` runs.
+     */
+    readonly limit: AccountRequest & {
+        readonly via: Transport | 'error';
+        readonly limit: LimitSignal;
+        readonly outputStarted: boolean;
+        readonly handle: Attempt<A>;
+    };
+    /** The retry hook ran for this provider. */
+    readonly retry: {
+        readonly sessionID: string;
+        readonly accountId?: string;
+        readonly kind?: RequestKind;
+        readonly attempt: number;
+        readonly reason: RetryReason;
+        readonly hostDecision: SessionRetryDecision;
+        readonly decision: SessionRetryDecision;
+        /** The attempt the decision was about, when it had an account. */
+        readonly handle?: Attempt<A>;
+    };
+}
+export type OpenCode2AuthEventName = keyof OpenCode2AuthEvents<unknown>;
+export interface OpenCode2AuthInstallation<Q, A = unknown> {
+    /**
+     * Listens to an event. Listener errors are logged and never reach the
+     * host. Returns a function that removes the listener.
+     */
+    on<E extends OpenCode2AuthEventName>(event: E, listener: (payload: OpenCode2AuthEvents<Q, A>[E]) => void | Promise<void>): () => void;
+    /**
+     * The account of the newest attempt of a session and request kind (after
+     * any `answeredBy` rebind). With several attempts of one session and kind
+     * in flight it names only the newest; each attempt's own account is on its
+     * handle.
+     */
+    accountFor(sessionID: string, kind: RequestKind): string | undefined;
+    /**
+     * Drops every attempt and revokes in-flight auth selections of a session.
+     * Session deletion does this itself. Later requests may reuse the session id.
+     */
+    forgetSession(sessionID: string): void;
+    /** Number of attempts held. */
+    readonly size: number;
+    /** Removes every hook, revokes in-flight auth and stops listening for session deletion. */
+    dispose(): Promise<void>;
+}

package/src/common-auth-embedded/pi-slot/index.d.ts

@@ -0,0 +1,3 @@
+/** Move a Pi provider slot aside without changing provider or model identifiers. */
+export type { PiSlot, PiSlotErrorCode, PiSlotInspection, PiSlotOptions, } from './slot.js';
+export { openPiSlot, PiSlotError } from './slot.js';

package/src/common-auth-embedded/pi-slot/index.js

@@ -0,0 +1,2 @@
+/** Move a Pi provider slot aside without changing provider or model identifiers. */
+export { openPiSlot, PiSlotError } from './slot.js';

package/src/common-auth-embedded/pi-slot/lock.js

@@ -0,0 +1,212 @@
+import { rmdirSync, statSync } from 'node:fs';
+import { mkdir, rmdir, stat, utimes } from 'node:fs/promises';
+// Protocol source: proper-lockfile 4.1.2 lib/lockfile.js and lib/mtime-precision.js;
+// line-level citations and the Pi lock options are recorded in docs/sources.md.
+// Pi's async acquireLockAsync uses stale=30s (update=15s). Keep takeover at 30s
+// so a live async writer's lock cannot be reclaimed between its renewals.
+const STALE = 30_000;
+// Pi's sync acquireLockSyncWithRetry uses proper-lockfile defaults: stale=10s,
+// update=5s. Renew every 3s for margin and stop retrying failed renewals after 10s.
+const RENEWAL_STALE = 10_000;
+const UPDATE = 3_000;
+let precision;
+/** Held locks, with the time each last renewed, for cleanup at process exit. */
+const active = new Map();
+process.once('exit', () => {
+    for (const [path, identity] of active) {
+        try {
+            // Pi's synchronous auth.json writer treats a lock whose mtime has not
+            // been refreshed for 10s as abandoned and may take it over. A lease that
+            // went 10s without renewing may therefore already be that writer's, so
+            // it is left in place; whoever next needs the lock clears it as stale.
+            if (identity.renewedAt + RENEWAL_STALE < Date.now())
+                continue;
+            const observed = statSync(path);
+            if (sameDirectory(observed, identity) &&
+                observed.mtime.getTime() === identity.mtime)
+                rmdirSync(path);
+        }
+        catch {
+            /* A compromised or already removed lock is not ours to clean up. */
+        }
+    }
+});
+function sameDirectory(observed, identity) {
+    return observed.dev === identity.dev && observed.ino === identity.ino;
+}
+function errorCode(error) {
+    return typeof error === 'object' && error !== null && 'code' in error
+        ? error.code
+        : undefined;
+}
+function held() {
+    return Object.assign(new Error('Pi auth lock held'), { code: 'ELOCKED' });
+}
+async function remove(path) {
+    try {
+        await rmdir(path);
+    }
+    catch (error) {
+        if (errorCode(error) !== 'ENOENT')
+            throw error;
+    }
+}
+async function acquire(path, stale) {
+    try {
+        await mkdir(path);
+    }
+    catch (error) {
+        if (errorCode(error) !== 'EEXIST')
+            throw error;
+        if (stale <= 0)
+            throw held();
+        let mtime;
+        try {
+            mtime = (await stat(path)).mtime.getTime();
+        }
+        catch (error) {
+            if (errorCode(error) === 'ENOENT')
+                return acquire(path, 0);
+            throw error;
+        }
+        if (!(mtime < Date.now() - stale))
+            throw held();
+        // Match upstream: rmdir (ignore ENOENT), then one mkdir attempt without another stale check.
+        await remove(path);
+        return acquire(path, 0);
+    }
+    try {
+        if (!precision) {
+            const probe = new Date(Math.ceil(Date.now() / 1_000) * 1_000 + 5);
+            await utimes(path, probe, probe);
+        }
+        const observed = await stat(path);
+        const mtime = observed.mtime.getTime();
+        precision ??= mtime % 1_000 === 0 ? 's' : 'ms';
+        return { dev: observed.dev, ino: observed.ino, mtime };
+    }
+    catch (error) {
+        await remove(path).catch(() => { });
+        throw error;
+    }
+}
+/** The same mkdir/mtime/rmdir protocol as Pi's proper-lockfile, with realpath disabled. */
+export async function acquirePiLock(authPath, onCompromised, onRenew) {
+    const path = `${authPath}.lock`;
+    const identity = await acquire(path, STALE);
+    let mtime = identity.mtime;
+    let lastUpdate = Date.now();
+    let released = false;
+    let timer;
+    active.set(path, { ...identity, renewedAt: lastUpdate });
+    function compromise() {
+        released = true;
+        if (timer)
+            clearTimeout(timer);
+        active.delete(path);
+        onCompromised();
+    }
+    function assertFresh() {
+        // A sync writer may already have reclaimed an unrenewed lock after 10s,
+        // even if the directory still matches. Never revive that expired lease.
+        if (!released && lastUpdate + RENEWAL_STALE < Date.now())
+            compromise();
+    }
+    function schedule(delay = UPDATE) {
+        if (released)
+            return;
+        timer = setTimeout(() => {
+            void update();
+        }, delay);
+        timer.unref();
+    }
+    function retry(error) {
+        if (released)
+            return;
+        if (errorCode(error) === 'ENOENT' ||
+            lastUpdate + RENEWAL_STALE < Date.now())
+            compromise();
+        else
+            schedule(1_000);
+    }
+    async function update() {
+        assertFresh();
+        if (released)
+            return;
+        let observed;
+        try {
+            observed = await stat(path);
+        }
+        catch (error) {
+            retry(error);
+            return;
+        }
+        assertFresh();
+        if (released)
+            return;
+        if (!sameDirectory(observed, identity) ||
+            observed.mtime.getTime() !== mtime) {
+            compromise();
+            return;
+        }
+        const next = new Date(precision === 's' ? Math.ceil(Date.now() / 1_000) * 1_000 : Date.now());
+        try {
+            await utimes(path, next, next);
+        }
+        catch (error) {
+            retry(error);
+            return;
+        }
+        if (released)
+            return;
+        mtime = next.getTime();
+        lastUpdate = Date.now();
+        active.set(path, { ...identity, mtime, renewedAt: lastUpdate });
+        schedule();
+    }
+    // Tests can resume a paused renewal without waiting for the production timer.
+    onRenew?.(async () => {
+        if (timer)
+            clearTimeout(timer);
+        await update();
+    });
+    schedule();
+    return {
+        assertFresh,
+        async release() {
+            if (released)
+                return;
+            released = true;
+            if (timer)
+                clearTimeout(timer);
+            active.delete(path);
+            // An expired lease is never removed, even when the directory still
+            // matches. Pi's synchronous auth.json writer may take over a lock that
+            // went 10s without an mtime refresh, so after 10s without renewing the
+            // directory may be that writer's. Whoever next needs the lock clears it
+            // as stale.
+            const expired = () => lastUpdate + RENEWAL_STALE < Date.now();
+            if (expired()) {
+                compromise();
+                return;
+            }
+            let observed;
+            try {
+                observed = await stat(path);
+            }
+            catch (error) {
+                if (errorCode(error) !== 'ENOENT')
+                    throw error;
+                compromise();
+                return;
+            }
+            if (expired() ||
+                !sameDirectory(observed, identity) ||
+                mtime !== observed.mtime.getTime()) {
+                compromise();
+                return;
+            }
+            await remove(path);
+        },
+    };
+}

package/src/common-auth-embedded/pi-slot/slot.d.ts

@@ -0,0 +1,49 @@
+export type PiSlotErrorCode = 'invalid-options' | 'invalid-auth' | 'invalid-stash' | 'unsafe-path' | 'missing-stash' | 'conflict' | 'lock-timeout' | 'lock-compromised' | 'io';
+/** Errors deliberately contain neither paths nor credentials nor underlying error messages. */
+export declare class PiSlotError extends Error {
+    readonly code: PiSlotErrorCode;
+    constructor(code: PiSlotErrorCode);
+}
+export interface PiSlotOptions {
+    authPath: string;
+    provider: string;
+    /**
+     * Where the provider's original Pi login is kept while the vault serves.
+     * Put it in a private directory, and give each provider its own file: one
+     * stash holds one provider's original login, and a second provider writing
+     * to it would overwrite the first one's backup.
+     */
+    stashPath: string;
+    /**
+     * The api_key Pi stores in the slot while the vault serves. It is a fixed,
+     * non-secret string that no provider accepts. Pi runs a key starting with
+     * `!` as a shell command and expands `$NAME` from the environment, so the
+     * placeholder may contain neither.
+     */
+    placeholderKey: string;
+    lockTimeoutMs?: number;
+}
+export interface PiSlotInspection {
+    slot: 'original' | 'placeholder' | 'foreign' | 'empty';
+    stash: 'valid' | 'missing';
+}
+export interface PiSlot {
+    inspect(): Promise<PiSlotInspection>;
+    enterVault(): Promise<void>;
+    exitVault(): Promise<'restored' | 'conflict' | 'nothing-to-do'>;
+}
+/**
+ * Production entry point. Pi caches which models are usable; after a
+ * successful transition the extension calls `ctx.modelRegistry.refresh()` so
+ * Pi re-reads the slot it just changed.
+ */
+export declare function openPiSlot(options: PiSlotOptions): PiSlot;
+/**
+ * Internal test entry point: pause reads, renewals, or renames to simulate races,
+ * and observe durable writes/deletion to simulate crashes. Not a public export.
+ */
+export declare function createPiSlot(options: PiSlotOptions, onStep?: (step: 'stash-written' | 'auth-written' | 'stash-deleted') => void, hooks?: {
+    afterReadCheck?: (path: string) => Promise<void>;
+    onRenew?: (renew: () => Promise<void>) => void;
+    beforeRename?: (path: string) => Promise<void>;
+}): PiSlot;