@cortexkit/opencode-antigravity-auth 2.2.1 → 3.0.1

package/README.md

@@ -4,13 +4,13 @@
 [![npm downloads](https://img.shields.io/npm/dw/@cortexkit/opencode-antigravity-auth.svg)](https://www.npmjs.com/package/@cortexkit/opencode-antigravity-auth)
 [![License: MIT](https://img.shields.io/badge/License-MIT-yellow.svg)](LICENSE)
 
-OpenCode 1.x plugin + OpenTUI sidebar for Google Antigravity. Authenticate with your Google account, get **Antigravity quota** access to Claude 4.6, Gemini 3.x/2.5, and GPT-OSS 120B, plus standalone OAuth login and quota commands through the bundled `antigravity-auth` CLI.
+Unified OpenCode 1.x (V1) and 2.x general-availability (GA) server/TUI plugin for Google Antigravity. Authenticate with your Google account, get **Antigravity quota** access to Claude 4.6, Gemini 3.x/2.5, and GPT-OSS 120B, plus standalone OAuth login and quota commands through the bundled `antigravity-auth` CLI.
 
 > **CAUTION — read before installing.**
 >
 > Using this plugin (and any proxy for Antigravity) violates Google's Terms of Service. Google account holders have reported suspensions, bans, and shadow-bans (restricted access without notice). The plugin is **not endorsed by Google**; you assume all risks.
 
-This package is part of the `@cortexkit/antigravity-auth@2.0.0` monorepo. See the [root README](../../README.md) for the full operator and contributor guide, the installation matrix, the configuration reference, and the release process.
+This package is part of the Antigravity Auth monorepo. See the [root README](../../README.md) for the full operator and contributor guide, the installation matrix, the configuration reference, and the release process. This guide describes the current source tree; it does not imply that an unreleased major version is available on npm.
 
 ## What you get
 
@@ -18,46 +18,48 @@ This package is part of the `@cortexkit/antigravity-auth@2.0.0` monorepo. See th
 - **GPT-OSS 120B Medium** through the Antigravity-style headers.
 - **Multi-account rotation** with deterministic selection (`sticky`, `round-robin`, `hybrid`), per-account rate-limit cooldowns, and a failsafe **killswitch** that hard-blocks accounts below a quota threshold.
 - **Dual quota pools:** Antigravity headers + Gemini CLI headers with style-fallback so a single exhausted pool does not stall a request.
-- **OpenTUI sidebar** — read-only, polls the on-disk sidebar-state file every 2s. Carries per-account health, cooldown, and per-quota-group remaining percent; never carries credentials.
-- **Six slash commands** wired through the OpenTUI dialog system — `/antigravity-quota`, `/antigravity-account`, `/antigravity-routing`, `/antigravity-killswitch`, `/antigravity-dump`, `/antigravity-logging`. See `packages/opencode/src/plugin/commands.ts` and `packages/opencode/src/tui/command-dialogs.tsx`. `/gemini-dump` remains a backward-compat alias.
+- **OpenTUI sidebar** — read-only account/quota state; V1 polls the on-disk sidebar-state file, while GA polls location-scoped snapshots through native host RPC. Neither carries credentials.
+- **One `/antigravity` menu** for accounts, quota, routing, limits, diagnostics, sign-in, and vault setup. See [`src/plugin/commands.ts`](src/plugin/commands.ts) and [`src/tui/command-dialogs.tsx`](src/tui/command-dialogs.tsx).
 - **Thinking models** with optional signature caching and precompiled OpenTUI JSX.
-- **Standalone CLI** shipped as the `antigravity-auth` bin (`login`, `list`, `quota`) — same storage as the plugin.
+- **Standalone CLI** shipped as the `antigravity-auth` bin (`init`, `migrate`, `rollback`, `login`, `list`, `quota`) — same local shared account store as the plugin.
 - **Auto-recovery** from `tool_result_missing` errors and proactive background token refresh.
 
 ## Host requirement
 
 | Host field | Required range |
 | --- | --- |
-| `@opencode-ai/plugin` peer dependency | `>=1.17.13 <2` |
-| `@opentui/core`, `@opentui/keymap`, `@opentui/solid` (peer) | `^0.4.5` each |
+| OpenCode engine | `>=1.17.13 <2` or `>=2.0.22` |
+| V1 SDK peer (`@opencode-ai/plugin`) | `*` (checkout pin `1.17.13`) |
+| GA SDK peer (`@opencode/plugin`) | `>=2.0.22` (checkout pin `2.0.22`) |
+| `@opentui/core`, `@opentui/keymap`, `@opentui/solid` peers | `>=0.4.5` each |
+| `solid-js` peer | `>=1.9.0` |
 | Node | `>=20` |
 
-The package pins the supported host range through `engines.opencode` (`>=1.17.13 <2`); `opencode plugin` refuses to install a plugin that asks for an unsupported range.
+Host peers are optional in the [manifest](package.json), since each process uses its matching SDK/runtime. The checkout pins V1 OpenTUI `0.4.5` and GA OpenTUI `0.5.14`; the broad peer range is not proof that every host/runtime combination works. Installer enforcement must be checked against the host itself.
 
-The package exposes two `exports` subpaths the host installer reads:
+The public entries are:
 
-- `exports["."]` — the bundled `dist/index.js` server root. `opencode plugin` writes this entry into `opencode.json`'s `plugin` array.
-- `exports["./tui"]` — `src/tui/entry.mjs`, the OpenTUI sidebar loader. `opencode plugin` writes this entry into `tui.json` so the TUI process picks it up on the next host start.
+- `exports["."]` — `dist/index.js`, the legacy V1 root.
+- `exports["./server"]` — `dist/server.js`, the hybrid V1/GA server from [`src/server.ts`](src/server.ts).
+- `exports["./tui"]` — [`src/tui/entry.mjs`](src/tui/entry.mjs), dispatching to V1 or GA compiled/raw TUI trees.
+
+Top-level [`server.js`](server.js) and [`tui.js`](tui.js) forward directory-based host loading to those same entries. No separate OpenCode 2 adapter is installed.
 
 ## Installation
 
-### End-user (npm) — the supported path
+### OpenCode V1 (npm)
 
-The supported installer writes both registrations in one step:
+For V1 hosts that expose `opencode plugin`, the documented npm command is:
 
 ```bash
 opencode plugin @cortexkit/opencode-antigravity-auth@latest
 ```
 
-What this does:
-
-- Reads the package's `exports["."]` and writes it into `~/.config/opencode/opencode.json` under the `plugin` array — the `auth.loader` and `fetch` interceptor the host calls on every model dispatch.
-- Reads the package's `exports["./tui"]` and writes it into `~/.config/opencode/tui.json` so the TUI process picks the sidebar up on the next host start.
-- Refuses to install when the host's OpenCode version falls outside the package's `engines.opencode` range.
+Verify the command in the matching host's help and inspect the resulting registrations. The package source proves its entries, not every host installer's effects. V1 uses a server registration in `opencode.json` and a TUI registration in `tui.json`; this recipe is not a GA CLI/config recipe.
 
 #### Manual config (hand-edited configs)
 
-If you cannot use `opencode plugin`, write both files by hand:
+V1 manual examples (merge into existing configs):
 
 ```jsonc
 // ~/.config/opencode/opencode.json
@@ -75,38 +77,54 @@ If you cannot use `opencode plugin`, write both files by hand:
 
 The two files are independent — the server registration is read from `opencode.json` and the TUI registration from `tui.json`.
 
-Then start OpenCode and run `opencode auth login`, pick **Antigravity (Google OAuth)** in the menu (or `/antigravity-account add`). Verify with `npx -y @cortexkit/opencode-antigravity-auth quota`.
+Before starting OpenCode, initialize a fresh local store or complete the [offline migration](#major-upgrades-account-store-migration-and-rollback). Pick **Antigravity (Google OAuth)** from the Google provider login, or use Sign in from `/antigravity`. Verify with the new build's `antigravity-auth quota`.
+
+### OpenCode GA (2.x)
+
+The same package provides GA server **and TUI**. The [pinned OpenCode 2.0.22 harness](../e2e-tests/src/opencode-ga-harness.ts) uses plural `plugins` with an absolute wrapper directory; its colocated server/TUI wrappers import the public `./server` and `./tui` entries. The shipped `server.js`/`tui.js` forwarders support registering the installed package's absolute directory in `plugins`, as shown below:
+
+```jsonc
+{
+  "plugins": ["/absolute/path/to/node_modules/@cortexkit/opencode-antigravity-auth"]
+}
+```
+
+The directory example follows the shipped forwarders, not a verified GA npm-installer command. Direct npm-spec registration and host CLI installation syntax remain unproven here; use the matching host's documentation. Do not copy the harness's synthetic provider credentials/mock URL. The harness's default fixture config has no user model map; no copied model-map requirement is established. See [the root GA guide](../../README.md#opencode-ga-2x) and the [host pin](../e2e-tests/docker/ga-binary-pin.json).
 
 ### Contributor (Bun)
 
 ```bash
-bun install                                          # at repo root
+bun install --frozen-lockfile                        # at repo root
+bun install --cwd tools/common-auth-build --frozen-lockfile --ignore-scripts # Bun 1.4.2 private compiler
 bun run build                                        # core -> opencode -> pi
 bun run --cwd packages/opencode smoke:tui            # bundle + spawn the precompiled TUI
 ```
 
-A precompiled JSX tree ships under `dist/src/tui-compiled/` and is regenerated by `bun run build:tui` (alias of `bunx tsx packages/opencode/scripts/build-tui.ts`). The host runtime module loads either the **precompiled** tree (production) or the **raw** `src/tui.tsx` source (development installs). `bun run --cwd packages/opencode smoke:tui` confirms both subpaths resolve correctly against the packaged tarball.
+The public TUI loader chooses the V1 or GA renderer. V1 uses `src/tui-compiled/tui.js` for the host runtime or `src/tui-raw/tui.tsx` as the raw fallback; GA uses the `src/tui-ga-compiled/` and `src/tui-ga-raw/` trees. The loader probes virtual runtime support before selecting compiled or raw JSX. Other import errors propagate unchanged. Regenerate the trees with **Bun 1.4.2**: `bun run --cwd packages/opencode build:tui`. `bun run --cwd packages/opencode smoke:tui` checks fresh tarballs and consumer-local resolution. The private compiler and its input archive are repository-only and never shipped.
 
 > Note: the pre-`2.0` inline quota helper is no longer shipped. Use `antigravity-auth quota [--refresh] [--json]` from this package or from the standalone CLI.
 
-## v2.0 migration
+## Major upgrades: account-store migration and rollback
+
+The local OpenCode pool now uses a shared account store, not direct writes to legacy `antigravity-accounts.json`. Use `antigravity-auth` from the **build you are upgrading to**, whose `--help` lists `init`, `migrate`, and `rollback`, before starting the host. “New CLI” below means that build's CLI:
+
+**Before a major upgrade**, disable automatic config updates with the top-level setting below in the effective `antigravity.json`; project overrides must not re-enable it:
 
-- **Root exports changed.** The package no longer re-exports `authorizeAntigravity` / `exchangeAntigravity` at the root — import them from `@cortexkit/antigravity-auth-core` instead:
+```json
+{
+  "auto_update": false
+}
+```
 
-  ```ts
-  // v1.x — no longer supported at the root
-  // import { authorizeAntigravity } from "@cortexkit/opencode-antigravity-auth"
+The published v2.2.1 default is `true`, and its restart-time update check can advance pinned configs across majors. Pinning a version alone is not an update hold. Merge this setting into existing config before stopping the host for migration; it does not replace the offline procedure. See the [root upgrade guide](../../README.md#major-upgrades-migration-and-rollback) for the historical updater/schema references.
 
-  // v2.0 — explicit core import
-  import { authorizeAntigravity, exchangeAntigravity } from "@cortexkit/antigravity-auth-core"
-  ```
+- **Fresh installation:** run `antigravity-auth init`, then log in. Initialization refuses an existing legacy pool; use migration instead.
+- **Existing legacy OpenCode pool:** stop **every OpenCode and Antigravity process and timer** that can use the pool, then run `antigravity-auth migrate --offline`. Confirm the stopped-process prompt by typing `yes`. Optional `--yes` skips the prompt, not the requirement to stop processes.
+- **Downgrade after migration:** stop every OpenCode and Antigravity process and timer using the pool again, run `antigravity-auth rollback --offline` with the **new CLI**, confirm and wait for successful completion, and only then install/start an older build.
 
-- **`@opencode-ai/plugin` peer dependency** moved from `^0.15.30` to `^1.17.13`. Hosts on 1.17.13+ get the TUI registration through `opencode plugin` (the host reads `exports["./tui"]` and writes it into `tui.json`).
-- **New peer dependencies** (`@opentui/core`, `@opentui/keymap`, `@opentui/solid` at `^0.4.5`) — required by the sidebar.
-- No account-storage changes: the on-disk format is unchanged from the v1.4+ storage schema (`AccountStorageV4`).
-- Missing accounts now return **HTTP 401 `UNAUTHENTICATED`** from the fetch interceptor instead of a synthetic 200 with assistant text.
+Rollback exports **current credentials and metadata** from the active generation into legacy V4 JSON; it never revives tokens from the original backup. It refuses an existing/recreated legacy file, changed snapshots, or credentials/metadata changed during rollback. Do not copy an old snapshot back, recreate the legacy file, or run old and new versions concurrently. If migration or rollback fails, keep the hosts stopped and resolve the reported refusal rather than bypassing it.
 
-See [packages/opencode/CHANGELOG.md](./CHANGELOG.md) for the full list of v2.0.0 changes.
+These commands manage the local OpenCode pool only. The host's native Google auth slot used to activate the provider and approved credentials held by the vault are separate: before changing builds, disconnect vault enrollment via `/antigravity` → Vault in the currently installed plugin, and re-login if native credentials cannot be safely restored. No complete restoration of native host records is promised. Pi's native auth file is **not** this pool; Pi-only users must not migrate it. See [the root upgrade guide](../../README.md#major-upgrades-migration-and-rollback), [`src/cli.ts`](./src/cli.ts), and [`account-migration.ts`](../core/src/account-migration.ts).
 
 ## Models
 
@@ -122,17 +140,19 @@ The model registry lives at `packages/core/src/model-registry.ts`; the OpenCode
 | `antigravity-gemini-3.5-flash` | `low`, `high` | `gemini-flash` |
 | `antigravity-gemini-3.1-pro` | `low`, `high` | `gemini-pro` |
 | `antigravity-gemini-3.1-flash-image` | — | `gemini-flash` |
-| `antigravity-claude-sonnet-4-6-thinking` | — | `claude` |
-| `antigravity-claude-opus-4-6-thinking` | — | `claude` |
+| `antigravity-claude-sonnet-5-5` | low / medium / high | `claude` |
+| `antigravity-claude-opus-5-5` | low / medium / high | `claude` |
 | `antigravity-gpt-oss-120b-medium` | — | `gpt-oss` |
 
-> Gemini 3.8 Flash Cyber is restricted to Fairwind trusted defenders and is absent from the AGY 1.1.24 model catalog, so it is not exposed by this plugin. Gemini 3.5 Flash-Lite is also absent from the AGY catalog, and Gemini 3.5 Flash Cyber remains restricted to a limited-access CodeMender pilot.
+> Claude 5.5 has a 1,000,000-token context and 128,000-token output limit, with adaptive thinking. Claude 4.6 requests refuse rather than redirecting to a different model.
+
+> Gemini 3.8 Flash Cyber is absent from the captured AGY 1.3.3 server catalog, so it is not exposed by this plugin. Gemini 3.5 Flash-Lite is also absent from the AGY catalog, and Gemini 3.5 Flash Cyber remains restricted to a limited-access CodeMender pilot.
 
 ### Routing
 
 - **Antigravity-first (default).** Gemini requests go to the Antigravity header style first; on `429 RESOURCE_EXHAUSTED` they fall back to the Gemini CLI header set.
-- **CLI-first** (`cli_first: true`). Flip the order — Gemini CLI first, Antigravity fallback. Toggle at runtime through `/antigravity-routing cli_first=true`.
-- **Style-fallback** (`quota_style_fallback: true`). Re-send the SAME request through the other header set on a rate limit. Default OFF to prevent double-spend across pools. Toggle at runtime through `/antigravity-routing quota_style_fallback=true`.
+- **CLI-first** (`cli_first: true`). Flip the order — Gemini CLI first, Antigravity fallback. Change the live setting in `/antigravity` → Routing.
+- **Style-fallback** (`quota_style_fallback: true`). Re-send the SAME request through the other header set on a rate limit. Default OFF because retrying can consume quota from both header-style pools. Change it in `/antigravity` → Routing.
 - **Claude and image models** always use Antigravity regardless of toggles.
 - Model names transform automatically between Antigravity and Gemini CLI namespaces (`antigravity-gemini-3-flash` ↔ `gemini-3-flash-preview`).
 
@@ -155,20 +175,11 @@ The **operator killswitch** is a hard rejection layer run BEFORE the soft-quota
 
 Both filters run before the token bucket / health score pick, so the operator's threshold is authoritative even on a healthy pool.
 
-## Six slash commands
-
-All commands are registered through `packages/opencode/src/plugin/catalog.ts` and the modal flow renders in `packages/opencode/src/tui/command-dialogs.tsx`. The apply RPC defaults to `2_000` ms; account `add` / `refresh` opts into `120_000` ms because OAuth can take up to two minutes on a fresh login.
+## `/antigravity` menu
 
-| Command | Args | Default timeout |
-| --- | --- | --- |
-| `/antigravity-quota` | `[refresh]` — status (default) or refresh all accounts | `2_000` |
-| `/antigravity-account` | `add` · `refresh` · `remove` · `list` | `2_000` for list/remove, `120_000` for add/refresh |
-| `/antigravity-routing` | `cli_first=true\|false` · `quota_style_fallback=true\|false` (omit a key to flip) | `2_000` |
-| `/antigravity-killswitch` | `enabled=true\|false` · `minimum_remaining_percent=0..100` | `2_000` |
-| `/antigravity-dump` | `enable` · `disable` · `status` (alias: `/gemini-dump`) | `2_000` |
-| `/antigravity-logging` | `error` · `warn` · `info` · `debug` · `trace` | `2_000` |
+Open `/antigravity` for Accounts, Quota, Routing, Limits (killswitch/account floors), Diagnostics (logging/dumps), Sign in, and Vault. Sections/actions depend on the active credential source. Use the menu actions rather than supplying per-feature slash-command arguments.
 
-Every apply mutates persistent state and bumps the sidebar's `checkedAt` via `createSidebarRefresher` so the TUI's next poll sees a fresh snapshot. Sidebar writers go through `sidebarWriteChain` (cross-process fenced lock, 2s lock timeout, atomic write `0600`).
+V1 registers the command in [`src/plugin/catalog.ts`](src/plugin/catalog.ts), builds it in [`src/plugin/commands.ts`](src/plugin/commands.ts), and renders it in [`src/tui/command-dialogs.tsx`](src/tui/command-dialogs.tsx). The common menu comes from core's [`antigravity-command-menu.ts`](../core/src/antigravity-command-menu.ts).
 
 ## Standalone CLI
 
@@ -180,51 +191,52 @@ npx -y @cortexkit/opencode-antigravity-auth list [--json]
 npx -y @cortexkit/opencode-antigravity-auth quota [--json] [--refresh]
 ```
 
+The new build also exposes `antigravity-auth init`, `migrate --offline [--yes]`, and `rollback --offline [--yes]`; see [Major upgrades](#major-upgrades-account-store-migration-and-rollback) before using them. Do not rely on an older npm CLI for store migration or rollback.
+
 - `login` runs the full PKCE + local callback flow. `--no-browser` prints the URL instead of opening it (handy in headless / SSH sessions where the browser cannot reach the callback port; see Troubleshooting).
 - `list` prints `INDEX`, `EMAIL`, `STATUS` for every account in storage (`active`, `disabled`, `ineligible`, `verification-required`).
 - `quota` prints `ACCOUNT`, `STATUS`, `GROUP`, `REMAINING`, `RESET` rows. `--refresh` forces a live refresh; `--json` emits the same data as JSON.
 
-Exit codes: `0` success, `1` thrown error, `2` parse failure. The CLI writes to the same `antigravity-accounts.json` the plugin reads — a CLI login shows up at the next plugin reload.
+Exit codes: `0` success, `1` thrown error, `2` parse failure. In local mode, CLI login writes through the same active shared store as the OpenCode adapters. `list` and `quota` read accounts; neither initializes nor migrates storage.
 
 ## Multi-account setup
 
-```bash
-opencode auth login                  # run again to add more accounts; pick Antigravity (Google OAuth)
-opencode auth login                  # → "Check quotas" or "Manage accounts" for the existing pool
-```
+Use the Google provider login or `/antigravity` → Sign in to add local accounts, then Accounts and Quota to inspect/manage the initialized repository. Models use the `google/` provider prefix (for example `google/antigravity-gemini-3.8-flash`); do not create a `google-antigravity` provider to activate this plugin. See [the root guide](../../README.md#multi-account-behavior) for the current store and the rotation strategies (`sticky`, `hybrid`, `round-robin`).
+
+### Local authority / vault custody
 
-Options exposed through the auth menu: configure models in `opencode.json` automatically, view remaining quota per account, enable/disable specific accounts. See [docs/MULTI-ACCOUNT.md](./docs/MULTI-ACCOUNT.md) for the storage schema, fenced-lock writers, and the rotation strategies (`sticky`, `hybrid`, `round-robin`) in depth.
+Both OpenCode host lines share the local store at the resolved account path; starting a new project does not create a separate pool. `/antigravity` → Vault manages enrollment and source selection. Local authority uses local repository credentials; vault custody excludes the local pool, including when the vault is unavailable. OpenCode 1 needs a saved Google auth entry to load the provider. Once loaded, approved enrollment supplies vault credentials without reading or validating that entry's contents: existing ordinary Google logins and placeholder records from other enrollments remain unchanged. Explicit fresh provider activation refuses to overwrite an occupied Google auth slot. GA vault serving requires the native Google connection created for that enrollment; Pi requires the non-secret Google-slot marker created for that enrollment. Host activation and source-mode files are separate from pool migration/rollback. See [`src/plugin/vault-custody.ts`](src/plugin/vault-custody.ts), [`src/plugin/auth-loader.ts`](src/plugin/auth-loader.ts), and [`src/plugin/vault-activation.ts`](src/plugin/vault-activation.ts).
 
 ## Sidebar / RPC state and recovery
 
-The sidebar reads from `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` (or whatever `ANTIGRAVITY_AUTH_SIDEBAR_STATE_FILE` points at) and polls every `2s`. The contract version is `1`; malformed JSON or unknown versions silently fall back to `DEFAULT_SIDEBAR_STATE` (which is rendered as "Awaiting Antigravity state"). Carries `version`, `checkedAt`, `accounts[]`, `activeRouting` (per-session map, pruned to 24h / 100 entries), `routingAuthoritative`, optional `quotaBackoffUntil` and `lastError`. **Never carries refresh tokens, access tokens, project IDs, or fingerprints.**
+The **V1 sidebar** reads from `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` (or whatever `ANTIGRAVITY_AUTH_SIDEBAR_STATE_FILE` points at) and polls every `2s`. The contract version is `1`; malformed JSON or unknown versions silently fall back to `DEFAULT_SIDEBAR_STATE` (which is rendered as "Awaiting Antigravity state"). Carries `version`, `checkedAt`, `accounts[]`, `activeRouting` (per-session map, pruned to 24h / 100 entries), `routingAuthoritative`, optional `quotaBackoffUntil` and `lastError`. **Never carries refresh tokens, access tokens, project IDs, or fingerprints.** GA's sidebar/menu instead uses location-scoped snapshots through native host RPC; see [`src/ga/tui/host-ga.tsx`](src/ga/tui/host-ga.tsx).
 
-The RPC lives under `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/port-<pid>.json` (override via `ANTIGRAVITY_AUTH_RPC_DIR`). The TUI process reads the highest-mtime live entry, drops entries whose owning PID is dead (`process.kill(pid, 0)`), and posts to `/rpc/apply` / `/rpc/pending-notifications` with a `Bearer <token>` header on `http://127.0.0.1`. The default request timeout is `2_000` ms; account `add` / `refresh` opts into `120_000` ms.
+The **V1 RPC** lives under `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/port-<pid>.json` (override via `ANTIGRAVITY_AUTH_RPC_DIR`). The TUI selects a live entry and exchanges shared menu requests/notifications with the loopback server using a `Bearer <token>` header. GA uses its own server/TUI integration; this V1 port file is not a GA host configuration requirement.
 
 **Recovery from a stale sidebar** — stop the host, verify `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` exists and is `0600`, then restart. **Recovery from a missing RPC port file** — confirm the running plugin process exists; `getRpcDir(directory)` derives the directory from a sha256 of the project directory, so two projects on the same host get independent RPC dirs.
 
-## Disposal
+## V1 disposal
 
-The plugin's `dispose()` (host shutdown) runs in order:
+`dispose()` marks the plugin closing synchronously so no new work is admitted. Shutdown then:
 
-1. Dispose the active `AccountManager` + proactive token-refresh queue.
-2. Shut down the disk signature cache (if `keep_thinking` is on).
-3. Clear the session registry.
-4. Drop the fetch-interceptor state.
-5. `drainSidebarWrites()` — wait for any in-flight sidebar-state merge to land so the TUI sees a fully landed snapshot if the user immediately reopens.
-6. Tear down registered disposables (RPC server, file logger, quota manager).
+1. Aborts and waits for live and retiring requests and token-refresh shutdown before disposing their account managers.
+2. Closes the disk signature cache and clears session/fetch state.
+3. Stops and waits for registered producers, so they cannot enqueue more sidebar writes.
+4. Waits for the queued sidebar writes to settle through `drainSidebarWrites()`.
+5. Stops registered consumers, including the RPC server and file logger.
 
-This ordering matters because a routing upsert enqueued at shutdown must land before the host closes the terminal. See `packages/opencode/src/plugin/lifecycle.ts:createPluginLifecycle`.
+The shutdown ordering above does not guarantee every attempted write succeeded or that the terminal rendered a final snapshot. See [`src/plugin/lifecycle.ts`](src/plugin/lifecycle.ts).
 
 ## File / state inventory (this package)
 
 | Purpose | Path | Mode | Notes |
 | --- | --- | --- | --- |
-| Account pool | `~/.config/opencode/antigravity-accounts.json` (`%APPDATA%\opencode\…` on Windows) | `0600` | Storage schema `V4`. |
+| Local account store | Beside the resolved account path: `antigravity-accounts.json.store.pointer.json` selects `antigravity-accounts.json.store.<id>.generation/` | Owner-only | Active `config.json` / `state.json`, migration journal, protected backups/transfers. |
+| Legacy pool | `~/.config/opencode/antigravity-accounts.json` (or `OPENCODE_CONFIG_DIR`) | `0600` | Legacy JSON schema version 4: migration input / successful rollback output, not the active writer target. |
 | Plugin config | `~/.config/opencode/antigravity.json` (and project `.opencode/antigravity.json`) | `0600` | Zod-validated config. |
 | Debug logs | `~/.config/opencode/antigravity-logs/` (or `log_dir`) | `0600` | Sensitive — request/response bodies. |
-| Sidebar state | `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` | `0600` dir `0700` | Poll-every-2s; pruned to 24h / 100 entries. |
-| RPC port file | `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/port-<pid>.json` | `0600` | Loopback token bearer. |
+| V1 sidebar state | `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` | `0600` dir `0700` | Poll-every-2s; pruned to 24h / 100 entries. |
+| V1 RPC port file | `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/port-<pid>.json` | `0600` | Loopback token bearer. |
 | Signature cache | `signature-cache-disk-<hash>.json` (when `keep_thinking: true`) | `0600` | 2-day default TTL. |
 
 ## Debug sinks
@@ -234,7 +246,7 @@ The plugin has **two** debug sinks controlled independently:
 - `debug: true` — file logging under `log_dir`. Disabled by default. May include request/response bodies; handle with care.
 - `debug_tui: true` — TUI log-panel verbosity. Independent of `debug`.
 
-Combined with the runtime log-level filter (`operator.log_level`, mutable through `/antigravity-logging`), you have three independent knobs.
+Combined with the runtime log-level filter (`operator.log_level`, mutable through `/antigravity` → Diagnostics), you have three independent knobs.
 
 ## Plugin interactions
 
@@ -280,7 +292,7 @@ Created by `~/.config/opencode/antigravity.json` for optional overrides. The ful
 
 ```json
 {
-  "$schema": "https://raw.githubusercontent.com/cortexkit/antigravity-auth/main/assets/antigravity.schema.json",
+  "$schema": "https://raw.githubusercontent.com/cortexkit/antigravity-auth/main/packages/opencode/assets/antigravity.schema.json",
   "account_selection_strategy": "hybrid",
   "scheduling_mode": "cache_first",
   "soft_quota_threshold_percent": 80,
@@ -302,58 +314,54 @@ For every option, see [docs/CONFIGURATION.md](./docs/CONFIGURATION.md) and the g
 
 ## Tests
 
-This package ships **deterministic** tests for everything except the model registry and the live cross-model regression suite:
+Run these commands from the **repository root**. Deterministic tests use isolated source selectors; live model/regression checks are separate:
 
 | Scope | Tooling | Network | Command |
 | --- | --- | --- | --- |
-| Unit (deterministic) | `bun test --isolate` | No | `bun run test` |
+| Unit (deterministic) | isolated source selectors in root `package.json` | No | `bun run test` |
 | Black-box e2e (deterministic) | mock Antigravity + harness runner in `packages/e2e-tests/` | No | `bun run test:e2e` |
 | Live model inventory | `script/test-models.ts` | Yes (gated by label) | `bun run test:e2e:models` |
 | Cross-model regression | `script/test-regression.ts` + `script/test-cross-model*.sh` | Yes | `bun run test:e2e:regression` |
-| TUI smoke | install tarball + spawn | No | `bun run smoke:tui` |
+| TUI smoke | install tarball + spawn | No | `bun run --cwd packages/opencode smoke:tui` |
 
 The deterministic tier is what CI gates; the live tier is opt-in for changes that touch the model registry, the request transform, or the response transform.
 
 ## Troubleshooting
 
-> **Quick reset** when nothing else works: stop OpenCode, `rm ~/.config/opencode/antigravity-accounts.json`, then `opencode auth login`.
+> Do not delete the legacy pool, store pointer/generation, or custody files as a generic reset. Stop the host, resolve the reported store/source refusal, then use `/antigravity` account actions or provider re-login. Deletion can destroy rollback evidence or the saved native login.
 
 ### Configuration paths (all platforms)
 
-OpenCode uses `~/.config/opencode/` on **all platforms** including Windows; do not use `%APPDATA%` for new installs. Override with `OPENCODE_CONFIG_DIR`. v1.3.x and earlier stored config under `%APPDATA%\opencode\` — the plugin auto-migrates on first read.
+The default account path is `~/.config/opencode/antigravity-accounts.json`; override its config directory with `OPENCODE_CONFIG_DIR`. Platform-path compatibility handling is separate from the new account-store migration: an existing legacy pool still requires explicit `migrate --offline`, not an automatic upgrade on first read. See [`src/plugin/storage.ts`](src/plugin/storage.ts).
 
 ### OAuth callback issues
 
 - **Safari HTTPS-Only mode** blocks `http://localhost`. Switch browsers or temporarily disable HTTPS-Only (Safari → Settings → Privacy) during login.
-- **Stale `Address already in use :51121`** — `lsof -i :51121` (or `netstat -ano | findstr :51121` on Windows) → kill the PID → retry. The standalone CLI's `--no-browser` flag avoids the listener entirely.
+- **Stale `Address already in use :51121`** — `lsof -i :51121` (or `netstat -ano | findstr :51121` on Windows) → stop the stale listener → retry. `--no-browser` suppresses browser launch; it is not a guarantee that the callback port is unused.
 - **SSH / remote dev** — forward the callback port with `ssh -L 51121:localhost:51121 user@remote`. The standalone CLI + `--no-browser` is the simplest workaround when SSH-port-forwarding is awkward.
 - **Docker / WSL2 / containers** — localhost OAuth does not work in containers out of the box. Wait 30s for the manual URL flow, or port-forward `51121` to the host.
 
 ### Common errors
 
-- **`Permission 'cloudaicompanion.companions.generateChat' denied on resource '…/locations/global'`** — Antigravity returned no project ID (likely a workspace account) and the plugin used the hardcoded fallback `rising-fact-p41fc`. Enable the Gemini for Google Cloud API on a Cloud project and set `projectId` on the account in `antigravity-accounts.json`.
+- **`Permission 'cloudaicompanion.companions.generateChat' denied on resource '…/locations/global'`** — Antigravity returned no project ID and the plugin used the fallback `rising-fact-p41fc`. Enable the Gemini for Google Cloud API on your project and authenticate locally with `antigravity-auth login --project <id>`; do not edit retired pool JSON. For vault credentials, contact the vault operator.
 - **Gemini 3 model 400 "Unknown name 'parameters'"** — usually a tool-schema incompatibility. Update to the latest plugin version; or disable MCP servers one-by-one to isolate the offender.
 - **`Invalid function name must start with a letter or underscore`** — an MCP tool name starts with a digit (e.g. `1mcp_*`). Rename the MCP key to start with a letter (e.g. `gw`) or disable that MCP entry for Antigravity models.
-- **`All Accounts Rate-Limited (But Quota Available)`** — usually a stale cascade in `clearExpiredRateLimits()`. Lower `soft_quota_threshold_percent` (or raise to `100`), run `/antigravity-quota refresh`, or delete `antigravity-accounts.json` and re-authenticate.
-- **Infinite `.tmp` files** — a rate-limit retry loop is creating temp files faster than cleanup. Stop OpenCode, `rm ~/.config/opencode/*.tmp`, add accounts, or wait for the cooldown.
+- **`All Accounts Rate-Limited (But Quota Available)`** — inspect thresholds and readings. Lower `soft_quota_threshold_percent` (or raise to `100`) and use `/antigravity` → Quota to check now; do not delete the store to clear cooldowns.
+- **Unexpected temporary files** — stop every process/timer using the pool and inspect the reported error. Do not remove migration, transfer, or custody artifacts while diagnosing a failed operation.
 
 ### Sidebar / TUI
 
 - **`Awaiting Antigravity state` stuck** — verify `$XDG_STATE_HOME/cortexkit/antigravity-auth/sidebar-state.json` exists, is `0600`, and the host user can write. Restart the host.
-- **TUI bundle fails to spawn** — `bun run --cwd packages/opencode build` regenerates `dist/src/tui-compiled/tui.tsx`. Verify the file exists. Then `bun run --cwd packages/opencode smoke:tui`.
-- **`Antigravity RPC server is not available`** — the TUI posts to a per-PID port file in `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/`. If the running plugin process is gone, stop and restart the host.
-
-### Migration between machines
+- **TUI bundle fails to spawn** — with **Bun 1.4.2**, `bun run --cwd packages/opencode build:tui` regenerates V1 and GA compiled/raw trees. Check the tree selected by `src/tui/entry.mjs`, then run `bun run --cwd packages/opencode smoke:tui`.
+- **`Antigravity RPC server is not available` (V1)** — the TUI uses a per-PID port file in `$XDG_STATE_HOME/cortexkit/antigravity-auth/rpc/<project-hash>/`. If the running plugin process is gone, stop and restart the host.
 
-When copying `antigravity-accounts.json` to a new machine:
+### Moving between machines
 
-1. Ensure the plugin is installed: `"plugin": ["@cortexkit/opencode-antigravity-auth@latest"]`.
-2. Copy `~/.config/opencode/antigravity-accounts.json` (preserve the `0600` mode).
-3. If you see `API key missing`, the refresh token may be invalid — re-authenticate.
+A migrated pool is not a single `antigravity-accounts.json` file. Do not copy only the old JSON or manually splice generation files into another profile. A general cross-machine store transfer procedure is not established here; prefer a fresh explicit initialization and re-login on the destination, or vault enrollment through `/antigravity`. Offline rollback downgrades the active store produced by initialization/migration; it is not a generic backup restore.
 
 ### Plugin config schema
 
-The schema reference at `assets/antigravity.schema.json` drives editor IntelliSense. Set `$schema: "https://raw.githubusercontent.com/cortexkit/antigravity-auth/main/assets/antigravity.schema.json"` in your `antigravity.json` for autocomplete in the IDE.
+The schema reference at `assets/antigravity.schema.json` drives editor IntelliSense. Set `$schema: "https://raw.githubusercontent.com/cortexkit/antigravity-auth/main/packages/opencode/assets/antigravity.schema.json"` in your `antigravity.json` for autocomplete in the IDE.
 
 ## Documentation