@codyswann/lisa 4.74.9 → 4.75.1

package/plugins/lisa-devin/hooks/block-managed-file-edits.sh

@@ -0,0 +1,1175 @@
+#!/usr/bin/env bash
+# This file is managed by Lisa and IS replaced on each `lisa` run.
+# Do not edit directly — durable changes belong upstream in Lisa.
+
+# PreToolUse hook: refuse agent writes to files Lisa overwrites on every apply.
+#
+# Lisa ships templates in three modes, and only one of them is unsafe to edit:
+#
+#   copy-overwrite — see below; the harm depends on the file.
+#   copy-contents  — Lisa APPENDS its lines; host content survives.
+#   create-only    — skipped when the file exists; the host owns it outright.
+#
+# So this guard covers copy-overwrite and nothing else. Blocking the other two
+# would stop agents editing files they are supposed to own, which is worse than
+# the problem being solved.
+#
+# The name `copy-overwrite` is misleading, and two successive versions of this
+# guard got the consequence wrong by trusting it. MEASURED, by mutating four
+# files in a scratch project and running a real `lisa apply` against them:
+#
+#   scripts/lisa-gates.mjs   (ledger-tracked)  → SURVIVED
+#   .lintstagedrc.json       (untracked, JSON) → SURVIVED
+#   .prettierignore          (untracked, text) → SURVIVED
+#   .yamllint                (untracked, text) → SURVIVED
+#
+#   Summary line: `Overwritten: 0 files` / `Out of date: 3 files (managed
+#   templates changed; NOT updated)`.
+#
+# copy-overwrite overwrites an UNMODIFIED copy — it refreshes. It does not
+# overwrite a host-edited one, in any population tested. So the harm is the same
+# for both, and it is not deletion:
+#
+#   THE FILE SILENTLY FORKS. It keeps looking current while every upstream fix
+#   stops reaching it. Nothing is lost, which is exactly what makes it invisible.
+#
+# Ledger membership changes the MESSAGE apply prints, not the outcome — tracked
+# files get a provenance verdict naming the fork and offering
+# `lisa-guard-capabilities:`; untracked ones get a bare "Out of date" warning.
+# The refusal branches on that so the reader sees the words apply will use.
+#
+# Measured, not hypothetical. Nothing enforced this, so downstream copies were
+# edited and then silently diverged: `classify-maestro-failures.mjs` reached
+# 36,061 bytes in one fleet repo against 29,586 shipped, and five gate files in
+# another stopped receiving upstream fixes — one over roughly 138 bytes of
+# cosmetic change. The edits were made in good faith; nothing told anyone the
+# file was not theirs.
+#
+# ## Why the path, not a banner comment
+#
+# 103 of Lisa's 145 copy-overwrite files carry a "managed by Lisa" header, and
+# the other 42 CANNOT: 30 are `.json` (no comment syntax), 8 are `.gitkeep` /
+# `.keep` placeholders, and the rest are bare-value files like `.nvmrc`. A guard
+# keyed on the banner would miss every one of them, so this resolves the path
+# against the installed package instead and covers all 145 regardless of format.
+#
+# Blocked signatures:
+#   1. Write / Edit / MultiEdit / NotebookEdit whose target resolves to a
+#      copy-overwrite template in the installed Lisa package;
+#   2. Bash output redirection (`>`, `>>`, `>|`), `tee`, or an in-place `sed`
+#      aimed at one — `-i`, `-i ''`, `-i.bak`, a cluster such as `-ni`, and the
+#      long `--in-place[=SUFFIX]`. Reads never fire;
+#   3. any of those inside a script the command EXECUTES — `bash edit.sh`,
+#      `sh`, `source`, `.`, `bash < edit.sh`, and behind wrappers that carry an
+#      operand of their own (`nice -n 5`, `timeout 5`, `sudo`).
+#
+# ## What signature 3 deliberately does NOT do
+#
+# A path is followed ONLY when the command EXECUTES it. `grep -n x edit.sh`,
+# `wc -l edit.sh`, `git diff edit.sh` and a test run over it name a file as
+# DATA, and following those is the known-wrong fix this guard family has already
+# made once: it refuses ordinary reads and attributes a file's capability to a
+# command that merely mentions it. Command POSITION decides. Taint does not
+# propagate any further either — a path a followed script merely NAMES is data
+# one file further out, not a third hop.
+#
+# ## Every agent surface reaches this guard, and Codex reaches it twice over
+#
+# There is no parity gap left to record. A note here used to record one, and it
+# was wrong by the time anyone read it — through two wordings. The first named
+# three surfaces; every one of those ports then shipped and the note stayed
+# unedited. The second named Codex alone, and Codex had never been the gap
+# either: the note and the check that read it were both looking in
+# `src/codex/scripts/`, and `src/codex/hooks-installer.ts` says in its own
+# opening remark that the linked-script layout that directory serves is RETIRED
+# (CodySwannGT/lisa#3750).
+#
+# The note is deleted rather than trimmed, because a stale gap note is worse
+# than none: it OVERSTATES the gap, and a reader who trusts it goes looking for
+# three missing ports, finds two present, and cannot tell which third is real
+# without redoing the measurement from scratch. AGENTS.md asks for a gap to be
+# documented instead of silently dropped — that only works while the document
+# is true.
+#
+# The deeper lesson is not "the note was stale". It is that a note asserting
+# ABSENCE and a check deriving presence from ONE path shape agree with each
+# other for free — the check read the same retired directory the note did, so
+# it returned a clean tick on a claim that was false.
+#
+# Where each surface picks it up, so the next reader measures instead of
+# guessing: Claude and Copilot from `.claude-plugin/plugin.json`, Cursor from
+# `hooks/hooks.json`, Antigravity from `hooks.json` via the `.agy.sh` adapter
+# beside this file, OpenCode from
+# `src/opencode/plugin-templates/lisa-block-managed-file-edits.ts`, and Codex
+# from TWO channels rather than one:
+#
+#   `plugins/lisa/.codex-plugin/hooks.json` registers this guard directly, on
+#   the Codex plugin channel.
+#
+#   `scripts/lisa-enforcement-fallback.sh` names this guard in its roster, and
+#   `src/codex/enforcement-fallback-installer.ts` registers that dispatcher on
+#   `PreToolUse` for `Bash|Edit|Write|apply_patch` — which is how Codex's
+#   `apply_patch` writes are reached at all.
+#
+# Both Codex channels are measured rather than inferred — see
+# `tests/unit/codex/block-managed-file-edits-codex.test.ts`, which drives the
+# registered command as a subprocess in a synthetic host project: a Codex
+# `apply_patch` or `Bash` redirect at a copy-overwrite template exits 2; an
+# ordinary edit to a host-owned file exits 0.
+#
+# Two checks hold this paragraph to the tree.
+# `tests/unit/hooks/managed-file-guard-parity-note.test.ts` fails if it goes
+# stale in either direction — a port that ships without the note being
+# narrowed, and a port REMOVED without it being restored.
+# `check:guard-parity-notes` refuses an absence claim written back in, and now
+# resolves Codex from those two registration channels as well as from a path
+# shape, so it can no longer agree with a false note for free.
+#
+# Exemptions (allowed):
+#   - `LISA_ALLOW_MANAGED_FILE_WRITE` set — the operator's explicit override,
+#     named in the refusal;
+#   - paths under `node_modules/` or `dist/` — vendored copies, not the host's;
+#   - the Lisa source repository itself, where these files are the originals and
+#     editing them is the entire point.
+#
+# The line below lets `lisa apply` tell a downstream copy of this guard that is
+# BEHIND from one that is AHEAD. Byte comparison cannot: both look like "differs
+# from mine", and guessing "behind" is how a fork's stronger guard gets silently
+# replaced by a weaker upstream one. Add a name here in the same commit that
+# closes a vector.
+# lisa-guard-capabilities: managed-path-resolution, lisaignore-precedence, generated-path-rebuild, redirect-target, tee-target, sed-in-place-all-spellings, executed-script-reach, source-builtin-reach, stdin-redirect-reach, wrapper-positional-operand, direct-script-command-reach, analyzer-failure-visible, apply-patch-parse-failure-visible, apply-patch-move-target, shell-command-string-reach
+set -euo pipefail
+
+input="$(cat)"
+
+# Evaluate once per tool call when this guard is registered on both channels.
+#
+# Lisa reaches an agent through the repository dispatcher AND the plugin
+# manifest, and where both are live the harness runs this guard twice for one
+# tool call. `guard-dedupe.bash` short-circuits the second run ONLY when a
+# byte-identical copy already ALLOWED this exact payload on this exact tool
+# call; a differing vintage, a refusal, and a host with one channel all
+# evaluate exactly as before. Nothing is de-registered by it
+# (CodySwannGT/lisa#3814).
+#
+# Absent library means no dedupe, which is the pre-existing behaviour, so an
+# older channel copy that predates it is unaffected.
+lisa_guard_hook_dir="${BASH_SOURCE[0]%/*}"
+lisa_guard_dedupe_lib="$lisa_guard_hook_dir/guard-dedupe.bash"
+if [ -r "$lisa_guard_dedupe_lib" ]; then
+  # shellcheck source=guard-dedupe.bash
+  . "$lisa_guard_dedupe_lib"
+  trap 'lisa_guard_dedupe_record $?' EXIT
+  lisa_guard_dedupe block-managed-file-edits "$input"
+fi
+
+command -v jq >/dev/null 2>&1 || exit 0
+
+# The operator's override, checked first so it is always the cheapest way out.
+if [ -n "${LISA_ALLOW_MANAGED_FILE_WRITE:-}" ]; then
+  exit 0
+fi
+
+tool_name="$(printf '%s' "$input" | jq -r '.tool_name // empty')"
+[ -n "$tool_name" ] || exit 0
+
+project_root="${CLAUDE_PROJECT_DIR:-$PWD}"
+package_root="$project_root/node_modules/@codyswann/lisa"
+
+# No installed Lisa means nothing to classify against. Silent, because a project
+# that has not installed Lisa is not doing anything wrong.
+[ -d "$package_root" ] || exit 0
+
+# In Lisa's own repository these files ARE the originals. Blocking here would
+# make the templates uneditable by the only agents that should edit them.
+if [ -f "$project_root/package.json" ] &&
+  grep -q '"name": *"@codyswann/lisa"' "$project_root/package.json" 2>/dev/null; then
+  exit 0
+fi
+
+# Whether the project has claimed a path in `.lisaignore`.
+#
+# THIS IS THE OWNERSHIP QUESTION, and it decides whether blocking is right at
+# all. `lisa apply` skips an ignored path — it logs `Kept (.lisaignore)` and
+# counts it as ignored rather than overwritten — so the file is the project's,
+# its edits survive, and refusing them would be refusing someone access to their
+# own file. `doctor-lisa-owned-artifacts` already consults this list; this guard
+# did not, which would have blocked deliberate forks.
+#
+# The real matcher is minimatch in `src/utils/ignore-patterns.ts` and cannot be
+# reproduced faithfully in shell. This covers the common shapes — exact path,
+# directory prefix, glob, and a bare pattern matching any segment — and where it
+# is unsure it ALLOWS. Wrongly allowing costs an edit that apply may overwrite,
+# which is the behaviour before this guard existed; wrongly blocking locks
+# someone out of a file they own.
+lisaignored() {
+  local rel="$1"
+  local list="$project_root/.lisaignore"
+  [ -f "$list" ] || return 1
+  # Gitignore precedence: patterns are read in order and the LAST one to select
+  # the path decides, so `!x` re-includes something an earlier line ignored.
+  # This mirrors `matchesAnyPattern` in `src/utils/ignore-patterns.ts`; the two
+  # must agree, or an agent gets blocked on a file apply considers the
+  # project's, or waved through on one it does not.
+  #
+  # `ignored` carries shell truth: 0 = ignored, 1 = not.
+  local ignored=1
+  local pattern
+  while IFS= read -r pattern || [ -n "$pattern" ]; do
+    pattern="${pattern#"${pattern%%[![:space:]]*}"}"
+    pattern="${pattern%"${pattern##*[![:space:]]}"}"
+    [ -n "$pattern" ] || continue
+    case "$pattern" in \#*) continue ;; esac
+    local negated=1
+    case "$pattern" in
+      # A bare `!` selects nothing rather than everything.
+      !) continue ;;
+      !*)
+        negated=0
+        pattern="${pattern#!}"
+        ;;
+      # `\!x` is a literal leading `!`, not a negation.
+      \\!*) pattern="${pattern#\\}" ;;
+    esac
+    local selected=1
+    case "$pattern" in
+      */)
+        case "$rel" in "${pattern%/}"/* | "${pattern%/}") selected=0 ;; esac
+        ;;
+    esac
+    if [ "$selected" -ne 0 ]; then
+      # The pattern is a glob on purpose, so it is deliberately unquoted.
+      #
+      # The reason sits on its own line because a shellcheck directive is
+      # `key=value` pairs and NOTHING else. Written as
+      # `disable=SC2254 -- <prose>`, the trailing words are read as more
+      # directive keys: the directive fails with SC1072/SC1073, shellcheck
+      # stops checking the rest of THIS FILE, and SC2254 is left unsuppressed
+      # as well. Measured with shellcheck 0.11.0. Do not rejoin these lines.
+      # shellcheck disable=SC2254
+      case "$rel" in $pattern) selected=0 ;; esac
+    fi
+    if [ "$selected" -ne 0 ]; then
+      case "$pattern" in
+        */*) ;;
+        *)
+          # Ditto, matched against the basename — and ditto about the reason
+          # living on its own line rather than after the directive.
+          # shellcheck disable=SC2254
+          case "${rel##*/}" in $pattern) selected=0 ;; esac
+          ;;
+      esac
+    fi
+    [ "$selected" -eq 0 ] || continue
+    # A positive match ignores the path; a negated one un-ignores it. Both
+    # OVERWRITE any earlier verdict rather than short-circuiting — that is what
+    # makes the last matching pattern win.
+    if [ "$negated" -eq 0 ]; then
+      ignored=1
+    else
+      ignored=0
+    fi
+  done <"$list"
+  return "$ignored"
+}
+
+# A candidate rewritten relative to the project, so an absolute target from a
+# tool payload and a relative one from a shell command classify identically.
+relative_path() {
+  local rel="${1#"$project_root"/}"
+  printf '%s' "${rel#./}"
+}
+
+# Whether a host-relative path is shipped as a copy-overwrite template.
+#
+# A few stat calls rather than an enumeration: the same relative path is probed
+# under each stack's copy-overwrite tree, so cost does not grow with the 145
+# templates.
+managed_source() {
+  local candidate="$1"
+  case "$candidate" in
+    */node_modules/* | node_modules/* | */dist/* | dist/*) return 1 ;;
+  esac
+  local rel
+  rel="$(relative_path "$candidate")"
+  [ -n "$rel" ] || return 1
+  # Claimed by the project, so not ours to refuse.
+  lisaignored "$rel" && return 1
+  local stack
+  for stack in "$package_root"/*/copy-overwrite; do
+    [ -d "$stack" ] || continue
+    if [ -e "$stack/$rel" ]; then
+      printf '%s' "${stack#"$package_root"/}/$rel"
+      return 0
+    fi
+  done
+  # A generated path has no template to point at — apply rebuilds it from the
+  # migration rather than copying it — so the source is named for the reader
+  # rather than resolved to a file that does not exist.
+  if generated_path "$rel"; then
+    printf '%s' "generated by lisa apply"
+    return 0
+  fi
+  return 1
+}
+
+# Whether a destination is a path `lisa apply` GENERATES rather than copies.
+#
+# Read out of the installed package, never restated here.
+# `dist/migrations/generated-paths.js` is the single source the vendoring
+# migration also imports, so a new generated tree is covered without editing this
+# hook. A hook carrying its own copy of that list would be a second place to
+# update that nobody updates, which then governs silently — the defect this file
+# already documents for copy-overwrite, one step along.
+#
+# The distinction earns its keep because the two populations fail in OPPOSITE
+# ways, and a guard that gives one answer is wrong for half the files it covers:
+# an edited copy-overwrite file is PRESERVED and silently forks, while a
+# generated file is REBUILT and the edit vanishes on the next explicit apply.
+generated_path() {
+  local rel="$1"
+  local module="$package_root/dist/migrations/generated-paths.js"
+  [ -f "$module" ] || return 1
+  local prefixes
+  prefixes="$(grep -oE '"[^"]+"' "$module" 2>/dev/null | tr -d '"')"
+  local prefix
+  for prefix in $prefixes; do
+    case "$prefix" in
+      */*) ;;
+      *) continue ;;
+    esac
+    case "$rel" in
+      "$prefix" | "$prefix"/*) return 0 ;;
+    esac
+  done
+  return 1
+}
+
+# Whether a destination is a ledger-tracked Lisa-owned guard.
+#
+# Both populations are PRESERVED once edited (measured — see the header). What
+# membership changes is what apply prints and what the escape hatch is: a tracked
+# guard gets a provenance verdict and can declare `lisa-guard-capabilities:`,
+# while an untracked template gets a bare "Out of date" line and `.lisaignore`.
+# The refusal quotes the words the reader will actually see, so it has to know
+# which side it is on.
+ledger_tracked() {
+  local rel="$1"
+  local ledger="$package_root/dist/core/lisa-owned-hash-ledger.js"
+  [ -f "$ledger" ] || return 1
+  grep -q "\"$rel\"" "$ledger" 2>/dev/null
+}
+
+refuse() {
+  local target="$1"
+  local source="$2"
+  local rel="$3"
+  if generated_path "$rel"; then
+    cat >&2 <<EOF
+BLOCKED: refusing to write \`$target\`.
+
+WHY: this file is generated by \`lisa apply\` (\`$source\`).
+\`lisa apply\` REGENERATES this file. The next explicit \`lisa apply\`
+rebuilds it, so a direct edit will be lost.
+
+Change the generation source upstream in Lisa, or the supported project
+configuration that supplies it, then run \`lisa apply\` to regenerate the file.
+
+If a human explicitly asked for this edit, they can re-run with
+\`LISA_ALLOW_MANAGED_FILE_WRITE=1\` set, which bypasses this guard.
+EOF
+    exit 2
+  fi
+  local consequence
+  if ledger_tracked "$rel"; then
+    consequence="\`lisa apply\` will KEEP your edit — this is a Lisa-owned guard,
+and apply says so: \"its contents match no Lisa release, so Lisa cannot tell
+whether it is out of date or deliberately stronger. Kept yours.\"
+
+That is the trap. Nothing is deleted; the file silently FORKS. It keeps looking
+current while every upstream fix stops reaching it. One repository in this fleet
+carries 243 lines of divergence nobody knew about, in a guard that had quietly
+stopped receiving fixes."
+  else
+    consequence="\`lisa apply\` will KEEP your edit and report the file as
+\"Out of date, not updated\" on every run from now on.
+
+That is the trap. Nothing is deleted; the file silently FORKS, stops receiving
+upstream changes, and adds a permanent warning line that the next person learns
+to scroll past."
+  fi
+  cat >&2 <<EOF
+BLOCKED: refusing to write \`$target\`.
+
+WHY: this file is Lisa-managed, shipped as a **copy-overwrite** template
+(\`$source\` in the installed package).
+
+$consequence
+
+WHERE IT GOES INSTEAD — take the first one that fits:
+
+1. The change should apply everywhere. Edit the template upstream in Lisa and
+   release it — \`/lisa:cross-pollinate\`, or an issue on CodySwannGT/lisa.
+   That is the only edit that survives an install.
+
+2. Only this project needs to differ. Look for the local escape hatch beside the
+   file — Lisa ships \`.local\` variants for the configs that support one
+   (\`eslint.config.local.ts\`, \`tsconfig.local.json\`, \`audit.ignore.local.json\`,
+   and others). Those are yours and are never overwritten.
+
+3. The behaviour is configurable rather than hardcoded. Check \`.lisa.config.json\`
+   — the \`gates\` block in particular decides which checks run and what command
+   proves each one, so a project can substitute its own task without touching a
+   shipped file.
+
+4. This project has deliberately FORKED this file and means to keep its own
+   version. Apply already preserves the edit either way, so what is left to
+   choose is whether the fork stays VISIBLE. Keeping it visible is the point:
+
+   - **A Lisa-owned guard (hash-tracked).** Do NOT add it to \`.lisaignore\`.
+     Apply preserves your version regardless, so ignoring it buys nothing — and
+     it silences the standoff \`lisa doctor\` reports on every run, replacing a
+     true warning with the line "Enforcement guards match the installed Lisa
+     version", which is then false. A visible, resolvable fork becomes a silent
+     permanent one. Instead declare what your version defends with a
+     \`lisa-guard-capabilities:\` line; apply then classifies it \`host-ahead\`
+     and says so by name, rather than reporting that it cannot tell.
+   - **Any other template.** \`.lisaignore\` records the divergence where the
+     next person can see it and stops the recurring "Out of date" line. It does
+     not preserve the file — apply already does — so use it to DECLARE a fork
+     you have decided on, never to quiet one you have not.
+
+5. You believe this file should not be Lisa-managed at all. That is a real
+   argument and it belongs upstream, not in a local edit that will be erased.
+
+If a human explicitly asked for this edit, they can re-run with
+\`LISA_ALLOW_MANAGED_FILE_WRITE=1\` set, which bypasses this guard.
+EOF
+  exit 2
+}
+
+case "$tool_name" in
+  apply_patch)
+    # Codex's primary edit mechanism, and the one this guard was already
+    # registered for while being unable to read it.
+    #
+    # `src/codex/enforcement-fallback-installer.ts` registers the dispatcher
+    # on `Bash|Edit|Write|apply_patch`, so this envelope was already being
+    # delivered here - and matched no arm below, fell off the end of the
+    # `case`, and exited 0. A registered guard that receives the call and
+    # allows it is worse than an unregistered one, because the wiring reads
+    # as complete: an auditor sees the matcher forwarding `apply_patch` into
+    # a guard about managed files and correctly concludes it is covered
+    # (CodySwannGT/lisa#3776).
+    #
+    # The envelope carries no `file_path`. Verified against codex-cli 0.125.0
+    # by capturing real hook stdin - see `src/codex/scripts/_extract-edit-paths.sh`,
+    # which performs this same header parse for the Codex-side hooks:
+    #
+    #   Edit / Write   -> tool_input.file_path  (single string)
+    #   apply_patch    -> tool_input.command    (a STRING holding the whole
+    #                                           patch, NOT an array)
+    #
+    # and the patch names its targets in header lines, MANY per patch:
+    #
+    #   *** Add File: <path>
+    #   *** Update File: <path>
+    #   *** Delete File: <path>
+    #   *** Move to: <path>
+    #
+    # So every header is walked and each target classified; one managed
+    # target anywhere in a multi-file patch refuses the whole call, because
+    # the patch applies atomically and there is no partial acceptance to
+    # offer.
+    #
+    # This restates `_extract-edit-paths.sh`'s header match rather than
+    # sourcing it, and that is forced by where the two files ship: this guard
+    # installs to a host's `scripts/lisa-hooks/`, that helper to
+    # `.codex/hooks/lisa/`, and neither tree can source across to the other.
+    # `tests/unit/hooks/block-managed-file-edits-apply-patch.test.ts` pins the
+    # two header sets equal so the restatement cannot drift into a gap - the
+    # same answer `core/hook-copy-parity` gives for sibling copies that
+    # legitimately cannot be one file. What is NOT restated is the
+    # classification: `managed_source` and `refuse` are the single copy here,
+    # exactly as for every other arm.
+    if ! patch_text="$(printf '%s' "$input" | jq -er '
+      if ((.tool_input.command? // "") | type) == "string"
+      then (.tool_input.command? // "")
+      else error("tool_input.command must be a string")
+      end')"; then
+      printf 'block-managed-file-edits: could not parse the apply_patch command; managed-file protection refused the edit\n' >&2
+      exit 2
+    fi
+    [ -n "$patch_text" ] || exit 0
+    while IFS= read -r patch_line; do
+      case "$patch_line" in
+        "*** Add File: "* | "*** Update File: "* | "*** Delete File: "*)
+          candidate="${patch_line#*File: }"
+          ;;
+        "*** Move to: "*)
+          candidate="${patch_line#*** Move to: }"
+          ;;
+        *) continue ;;
+      esac
+      [ -n "$candidate" ] || continue
+      if source_path="$(managed_source "$candidate")"; then
+        refuse "$candidate" "$source_path" "$(relative_path "$candidate")"
+      fi
+    done <<EOF
+$patch_text
+EOF
+    ;;
+  Write | Edit | MultiEdit | NotebookEdit | Update)
+    paths="$(printf '%s' "$input" | jq -r '
+      [ .tool_input.file_path?,
+        .tool_input.path?,
+        .tool_input.notebook_path?,
+        (.tool_input.edits? // [] | .[].file_path?)
+      ] | map(select(. != null and . != "")) | .[]' 2>/dev/null || true)"
+    while IFS= read -r candidate; do
+      [ -n "$candidate" ] || continue
+      if source_path="$(managed_source "$candidate")"; then
+        refuse "$candidate" "$source_path" "$(relative_path "$candidate")"
+      fi
+    done <<EOF
+$paths
+EOF
+    ;;
+  Bash)
+    command_str="$(printf '%s' "$input" | jq -r '.tool_input.command // empty')"
+    [ -n "$command_str" ] || exit 0
+    # A missing interpreter must be announced rather than swallowed. This guard
+    # degrades to "allow" — a hook that cannot parse its input cannot tell a
+    # write from a read — but a guard that is silently absent reads exactly like
+    # a guard that is passing.
+    if ! command -v python3 >/dev/null 2>&1; then
+      printf 'block-managed-file-edits: python3 not found; Bash write protection is NOT active\n' >&2
+      exit 0
+    fi
+    # Why a tokenizer replaced the two-stage regex.
+    #
+    # The old extraction was `grep -Eo` for a redirect / tee / in-place sed,
+    # followed by a `sed -E` strip of the matched prefix. MEASURED against it:
+    # `tee <path>` and `tee -a <path>` extracted correctly, and EVERY `sed -i`
+    # spelling extracted NOTHING — `-i`, `-i ''` and `-i.bak` alike. The
+    # `grep` matched; the strip pattern `sed[[:space:]]+[^|;&]*-i[^|;&]*` is
+    # greedy, so it consumed the path along with the flags and left an empty
+    # token. The arm was DEAD, not merely missing macOS's two-token spelling.
+    #
+    # A regex cannot answer the question this guard actually asks — is this path
+    # WRITTEN or merely NAMED — because that depends on token position, which is
+    # what a tokenizer is for.
+    #
+    # The analyzer is read into a variable by `read -d ''` rather than run
+    # inside a command substitution wrapping a here-document. Bash finds the
+    # closing paren of a command substitution by re-scanning its text, and a
+    # here-document body nested there is scanned too: the lone backtick in
+    # `re.compile(r"[$`]")` below then reads as an unterminated backtick
+    # substitution and the whole script fails to parse. Keeping the
+    # here-document out of the substitution is the fix. This is also the shape
+    # `block-direct-issue-create.sh` already uses for its own classifier.
+    #
+    # The delimiter is deliberately not spelled out in this comment: a tool that
+    # greps for here-document starts would otherwise match the prose and read
+    # the wrong span.
+    analyzer=''
+    IFS= read -r -d '' analyzer <<'PY' || true
+import os
+import re
+import shlex
+import sys
+
+command = os.environ.get("MANAGED_EDIT_COMMAND", "")
+project = os.environ.get("MANAGED_EDIT_PROJECT", "") or os.getcwd()
+
+# Following a script costs a read on every intercepted command, so the walk is
+# bounded three ways, and a file past the cap is skipped rather than half-read:
+# a truncated scan reports a confident ALLOW about text it never saw.
+FOLLOW_MAX_BYTES = 262144
+FOLLOW_MAX_FILES = 8
+FOLLOW_MAX_DEPTH = 3
+ENV_SPLIT_UNRESOLVED = 42
+
+# Spelled with chr() rather than backslash escapes on purpose. This source is
+# embedded in a shell heredoc and copied verbatim through several generators
+# into every shipped plugin; a backslash literal is the one thing in it most
+# likely to be mangled in transit, and the mangling would be silent.
+BACKSLASH = chr(92)
+NEWLINE = chr(10)
+
+# `|&` pipes stdout and stderr into the next command, and the case terminators
+# end a statement as `;` does. Without them `printf x |& tee <managed>` stayed
+# one statement whose command word was `printf`, so the `tee` write target was
+# never examined.
+STATEMENT_SEPARATORS = {
+    ";", "|", "||", "&", "&&", "(", ")", "&|", "|&", ";;", ";&", ";;&",
+}
+# Ordinary output, noclobber override, and combined stdout/stderr output.
+# shlex separates fd prefixes (e.g. 10>>) from the operator automatically.
+REDIRECT_OUT = {">", ">>", ">|", "&>", "&>>", ">&"}
+REDIRECT_IN = "<"
+SYNTAX_OPERATORS = STATEMENT_SEPARATORS | REDIRECT_OUT | {REDIRECT_IN}
+# shlex groups adjacent punctuation even across distinct shell operators.
+# Retain other shell operators intact so a here-string is not three `<` reads.
+PUNCTUATION = re.compile(r"^[();<>|&]+$")
+SHELL_OPERATOR = re.compile("|".join(
+    re.escape(operator) for operator in sorted(
+        SYNTAX_OPERATORS | {"<<<", "<<", "<&", "<>", ";;&", ";;", ";&", "|&"},
+        key=lambda operator: (-len(operator), operator),
+    )
+))
+
+
+class LiteralOperator(str):
+    """Quoted or escaped operator text is an argument, never shell syntax."""
+
+
+SHELL_PROGRAMS = {"bash", "dash", "ksh", "sh", "zsh"}
+SOURCE_BUILTINS = {"source", "."}
+
+# Wrappers that run what FOLLOWS them without changing what it is, mapped to
+# (options whose value is a SEPARATE token, positional operands consumed).
+# The positional count is why this is a table rather than a set: `timeout 5
+# bash x` puts an operand between the wrapper and the interpreter, so a walk
+# that steps over `-flags` only stops at `5` and never reaches `bash`.
+FOLLOW_WRAPPERS = {
+    "builtin": (frozenset(), 0),
+    "command": (frozenset(), 0),
+    # `env bash edit.sh` runs `bash edit.sh`. Its absence here was the one
+    # wrapper on this list a caller reaches for without thinking about
+    # wrappers at all, because `env VAR=value <cmd>` is how a one-off
+    # environment override is spelled. Those `VAR=value` operands need no
+    # positional count: the walk below re-enters its assignment skip on the
+    # next iteration and steps over as many as are present.
+    "env": (
+        frozenset({"-C", "--chdir", "-P", "-u", "--unset"}),
+        0,
+    ),
+    "exec": (frozenset({"-a"}), 0),
+    "nice": (frozenset({"-n", "--adjustment"}), 0),
+    "nohup": (frozenset(), 0),
+    "setsid": (frozenset(), 0),
+    "stdbuf": (frozenset({"-i", "-o", "-e"}), 0),
+    "sudo": (
+        frozenset(
+            {
+                "-C", "--close-from", "-g", "--group", "-h", "--host",
+                "-p", "--prompt", "-r", "--role", "-t", "--type",
+                "-U", "--other-user", "-u", "--user",
+            }
+        ),
+        0,
+    ),
+    "time": (frozenset(), 0),
+    "timeout": (frozenset({"-k", "--kill-after", "-s", "--signal"}), 1),
+}
+
+# `-i`, `-i.bak`, a cluster such as `-ni`, and the long `--in-place[=SUFFIX]`.
+IN_PLACE = re.compile(r"^(--in-place(=.*)?|-[a-zA-Z]*i.*)$")
+# A value the SHELL computes; this hook runs before expansion and cannot know
+# which file it will name.
+COMPUTED_VALUE = re.compile(r"[$`]")
+
+
+def normalise_lines(text):
+    """Spell line breaks as statement separators.
+
+    A newline ends a command exactly as `;` does, but shlex treats it as plain
+    whitespace — so two consecutive lines of a followed script would read as
+    one invocation and only the first program would be classified. A
+    backslash-newline is joined first, because there the newline is NOT a
+    boundary.
+
+    Args:
+        text: A command line or a script's contents.
+
+    Returns:
+        The same text with line breaks spelled as separators.
+    """
+    output = []
+    quote = ""
+    position = 0
+    while position < len(text):
+        character = text[position]
+        if character == BACKSLASH and quote != "'" and position + 1 < len(text):
+            following = text[position + 1]
+            # The shell deletes continuations; inserting whitespace can split
+            # an operator or pathname and hide the actual output target.
+            if following != NEWLINE:
+                output.extend((character, following))
+            position += 2
+            continue
+        if quote:
+            if character == quote:
+                quote = ""
+        elif character in "'\"":
+            quote = character
+        if character == NEWLINE and not quote:
+            output.append(" ; ")
+        else:
+            output.append(character)
+        position += 1
+    return "".join(output)
+
+
+def tokenize(text):
+    """Tokenize with shell operators kept as their own tokens.
+
+    Args:
+        text: A command line or a script's contents.
+
+    Returns:
+        The token list, or None when the text does not lex.
+    """
+    normalized = normalise_lines(text)
+    lexer = shlex.shlex(normalized, posix=True, punctuation_chars=True)
+    lexer.whitespace_split = True
+    # `#` is not a comment introducer on a typed command line, and letting shlex
+    # treat it as one silently truncates the rest of the line.
+    lexer.commenters = ""
+    try:
+        tokens = []
+        start = 0
+        for token in lexer:
+            # shlex strips quotes/escapes and reads one character ahead when
+            # emitting punctuation. Exclude its character pushback from the
+            # consumed source span so a quoted operator retains its provenance.
+            end = lexer.instream.tell() - len(lexer._pushback_chars)
+            raw = normalized[start:end].strip()
+            start = end
+            if PUNCTUATION.fullmatch(token):
+                if raw != token:
+                    tokens.append(LiteralOperator(token))
+                else:
+                    tokens.extend(SHELL_OPERATOR.findall(token))
+            else:
+                tokens.append(token)
+        return tokens
+    except ValueError:
+        return None
+
+
+def strip_comments(text):
+    """Drop `#` comments from a FOLLOWED SCRIPT, quote-aware.
+
+    Applied to file contents and never to a typed command. A comment cannot
+    execute, and Lisa's own managed templates discuss redirection and `sed -i`
+    against managed paths in their headers — classifying a followed file
+    without dropping its comments reads documentation as an edit.
+
+    Args:
+        text: A script's contents.
+
+    Returns:
+        The same text with unquoted comments removed.
+    """
+    output = []
+    for line in text.split(NEWLINE):
+        quote = ""
+        escaped = False
+        cut = None
+        for position, character in enumerate(line):
+            if escaped:
+                escaped = False
+                continue
+            if character == BACKSLASH and quote != "'":
+                escaped = True
+                continue
+            if quote:
+                if character == quote:
+                    quote = ""
+                continue
+            if character in "'\"":
+                quote = character
+                continue
+            # A `#` opens a comment only at the start of a word, so `x#y` and
+            # `${x#y}` keep their hashes.
+            if character == "#" and (position == 0 or line[position - 1].isspace()):
+                cut = position
+                break
+        output.append(line if cut is None else line[:cut])
+    return NEWLINE.join(output)
+
+
+def statements(tokens):
+    """Split a token list at statement separators, keeping redirects inline.
+
+    Redirect operators are deliberately NOT separators here: `>` and its target
+    have to stay in the same group, because the pair is the write signature.
+
+    Args:
+        tokens: The operator-aware token list.
+
+    Returns:
+        A list of statements.
+    """
+    grouped = []
+    current = []
+    for token in tokens:
+        if not isinstance(token, LiteralOperator) and token in STATEMENT_SEPARATORS:
+            grouped.append(current)
+            current = []
+            continue
+        current.append(token)
+    grouped.append(current)
+    return grouped
+
+
+class UnresolvedEnvSplit(ValueError):
+    """Split-string syntax whose executed arguments cannot be proven here."""
+
+
+def parse_env_split(split_string):
+    """Parse only the env -S subset shared with ordinary quoted arguments.
+
+    GNU env has its own escapes, comments and environment interpolation. Do
+    not pretend shlex implements those, or invent environment values in a
+    pre-execution guard. The operator can spell the resulting command directly.
+
+    Args:
+        split_string: The literal argument supplied to env's split option.
+
+    Returns:
+        Arguments for the supported subset; otherwise raises UnresolvedEnvSplit.
+    """
+    if any(marker in split_string for marker in (BACKSLASH, "#", "$", chr(96), chr(11), chr(12))):
+        raise UnresolvedEnvSplit("escapes, comments, shell substitution, variable expansion or control whitespace")
+    try:
+        return shlex.split(split_string, comments=False, posix=True)
+    except ValueError as error:
+        raise UnresolvedEnvSplit("unbalanced quoting") from error
+
+
+def command_word(statement):
+    """The program a statement runs, and the tokens after it.
+
+    Steps over leading variable assignments and over wrappers that do not
+    change what runs. Reading a wrapper as the command is how a payload hides
+    from a guard that inspects only a statement's first word.
+
+    Args:
+        statement: One statement's tokens.
+
+    Returns:
+        A triple (token, program, args); (None, None, []) when no program is
+        named. The raw token is retained because `./edit.sh` has no interpreter:
+        its command word is itself the executed script.
+    """
+    index = 0
+    split_expansions = 0
+    while index < len(statement):
+        token = statement[index]
+        if "=" in token and not token.startswith(("=", "-")):
+            index += 1
+            continue
+        program = token.rsplit("/", 1)[-1]
+        if program not in FOLLOW_WRAPPERS:
+            return (token, program, statement[index + 1 :])
+        separate, positional = FOLLOW_WRAPPERS[program]
+        index += 1
+        while index < len(statement) and statement[index].startswith("-"):
+            option = statement[index]
+            if option == "--":
+                index += 1
+                break
+            # env -S inserts the split string back into env's argument list;
+            # it is executable input, not an option value to discard. Keep
+            # shell -c's quoted operand intact while expanding the env layer.
+            # The known no-operand flags can be combined before S (-vS/-ivS).
+            # Stop at S: the rest belongs to its argument, not more flags.
+            short_split = re.match(r"^-[iv0]*S(.*)$", option)
+            if program == "env" and (
+                option == "--split-string"
+                or option.startswith("--split-string=")
+                or short_split is not None
+            ):
+                consumed = 1
+                if option == "--split-string" or (
+                    short_split is not None and not short_split.group(1)
+                ):
+                    if index + 1 >= len(statement):
+                        raise UnresolvedEnvSplit("missing split-string operand")
+                    split_string = statement[index + 1]
+                    consumed = 2
+                elif option.startswith("--split-string="):
+                    split_string = option.split("=", 1)[1]
+                else:
+                    split_string = short_split.group(1)
+                if split_expansions >= 64:
+                    raise UnresolvedEnvSplit("nested split-string limit")
+                expanded = parse_env_split(split_string)
+                statement = [token] + expanded + statement[index + consumed :]
+                split_expansions += 1
+                index = 0
+                break
+            index += 2 if option in separate else 1
+        index += positional
+    return (None, None, [])
+
+
+def shell_script_operand(args):
+    """The file a shell invocation runs, or None when it runs no script file.
+
+    Args:
+        args: The tokens following the shell's own name.
+
+    Returns:
+        The operand token, or None for an interactive shell or a `-c` string.
+    """
+    for token in args:
+        if token == "--":
+            continue
+        if token.startswith(("-", "+")):
+            # A single-dash cluster containing `c` carries a command string,
+            # not a script file.
+            if not token.startswith("--") and "c" in token[1:]:
+                return None
+            # `-n` is noexec: the shell READS and parses the file, then exits
+            # without executing a line of it. `bash -n <file>` is the one shape
+            # that puts a path at a command position while provably running
+            # nothing — the exact seam between reading and running, and this
+            # walk got it wrong (CodySwannGT/lisa#3781). Here that meant a
+            # syntax check of any script mentioning a managed path was refused
+            # as though it were about to write one.
+            #
+            # `bash <file>` still executes and is still refused. Noexec is the
+            # distinction, not the program.
+            if token == "--noexec" or (
+                not token.startswith("--") and "n" in token[1:]
+            ):
+                return None
+            continue
+        return token
+    return None
+
+
+def shell_command_string(statement):
+    """The inline command a shell executes with `-c`, or None.
+
+    Args:
+        statement: One statement's tokens.
+
+    Returns:
+        The command string operand, or None when this is not a shell `-c` call.
+    """
+    _token, program, args = command_word(statement)
+    if program not in SHELL_PROGRAMS:
+        return None
+    for index, token in enumerate(args):
+        if token == "--":
+            return None
+        if token.startswith("-") and not token.startswith("--") and "c" in token[1:]:
+            command_index = index + 1
+            if command_index < len(args) and args[command_index] == "--":
+                command_index += 1
+            return args[command_index] if command_index < len(args) else None
+    return None
+
+
+def write_targets(statement):
+    """Paths this statement WRITES.
+
+    Reads never fire. A path has to be the target of an output redirection, or
+    an operand of `tee` or of an in-place `sed`. That is the whole distinction
+    this guard turns on: `grep -n x <managed>` names the same path and stays
+    allowed, and following a merely-named path is the known-wrong fix that
+    refuses ordinary reads elsewhere in this family.
+
+    Extraction is deliberately GENEROUS for `tee` and `sed`: every non-flag
+    operand is offered. It costs nothing, because the caller classifies each
+    candidate by resolving it against the installed package, and a `sed` script
+    expression such as `s/a/b/` resolves to no template. Being narrow here is
+    precisely what left the old `sed -i` arm dead in every spelling.
+
+    Args:
+        statement: One statement's tokens.
+
+    Returns:
+        Candidate paths this statement writes.
+    """
+    found = []
+    _token, program, args = command_word(statement)
+    for index, token in enumerate(statement):
+        if not isinstance(token, LiteralOperator) and token in REDIRECT_OUT and index + 1 < len(statement):
+            target = statement[index + 1]
+            # >&digit duplicates an fd, >&digit- moves it, and >&- closes it.
+            # Only the nonnumeric >&word form opens a pathname; &>1 still
+            # writes a file named 1 and must remain a write candidate.
+            if token == ">&" and re.fullmatch(r"(?:[0-9]+-?|-)", target):
+                continue
+            found.append(target)
+    if program == "tee":
+        found.extend(token for token in args if not token.startswith("-"))
+    elif program == "sed" and any(IN_PLACE.match(token) for token in args):
+        found.extend(token for token in args if not token.startswith("-"))
+    return found
+
+
+def executed_script(statement):
+    """The path this statement EXECUTES, or None.
+
+    Only a COMMAND POSITION can execute something. A path anywhere else is an
+    argument, and an argument is data.
+
+    Args:
+        statement: One statement's tokens.
+
+    Returns:
+        The operand token naming a script that will run, or None.
+    """
+    token, program, args = command_word(statement)
+    if program is None:
+        return None
+    if program in SHELL_PROGRAMS:
+        for index, token in enumerate(statement):
+            # `bash < script.sh` runs that file as surely as `bash script.sh`.
+            if not isinstance(token, LiteralOperator) and token == REDIRECT_IN and index + 1 < len(statement):
+                return statement[index + 1]
+        return shell_script_operand(args)
+    if program in SOURCE_BUILTINS:
+        return args[0] if args else None
+    # A script in command position executes through its shebang. This also
+    # covers a direct path after wrappers such as `sudo ./edit.sh`; `command_word`
+    # deliberately keeps the raw token while using its basename for wrapper and
+    # shell classification.
+    if resolve(token) is not None:
+        return token
+    return None
+
+
+def resolve(token):
+    """An existing readable script a token names, or None.
+
+    A computed target (`bash "$SCRIPT"`) is NOT followed and NOT refused. This
+    guard's harm is a template that silently forks — recoverable, and reported
+    by `lisa doctor` on every run — so failing closed on every `bash "$SCRIPT"`
+    in every host project would cost far more than it buys. Its sibling
+    `block-no-verify` DOES fail closed on the identical shape, because an
+    unverified commit is not recoverable. The divergence is deliberate, and it
+    is recorded here so the next reader does not read it as an oversight.
+
+    Args:
+        token: The operand naming a script.
+
+    Returns:
+        A path, or None.
+    """
+    if COMPUTED_VALUE.search(token):
+        return None
+    text = token.strip().strip("'\"")
+    if not text or text == "-":
+        return None
+    if os.path.isabs(text):
+        candidates = [text]
+    else:
+        candidates = [os.path.join(project, text), os.path.join(os.getcwd(), text)]
+    for candidate in candidates:
+        try:
+            if not os.path.isfile(candidate):
+                continue
+            if os.path.getsize(candidate) > FOLLOW_MAX_BYTES:
+                continue
+        except OSError:
+            continue
+        return candidate
+    return None
+
+
+def collect(text, depth, seen, out):
+    """Accumulate every write target in this text and in the scripts it runs.
+
+    Args:
+        text: A command line, or a followed script's contents.
+        depth: Number of scripts already followed.
+        seen: Real paths already inspected, so a cycle terminates.
+        out: Accumulator for candidate paths.
+
+    Returns:
+        Nothing; `out` is extended in place.
+    """
+    tokens = tokenize(text)
+    if tokens is None:
+        return
+    for statement in statements(tokens):
+        if not statement:
+            continue
+        out.extend(write_targets(statement))
+        nested = shell_command_string(statement)
+        if nested is not None and depth < FOLLOW_MAX_DEPTH:
+            collect(nested, depth + 1, seen, out)
+        operand = executed_script(statement)
+        if operand is None:
+            continue
+        if depth >= FOLLOW_MAX_DEPTH or len(seen) >= FOLLOW_MAX_FILES:
+            continue
+        path = resolve(operand)
+        if path is None:
+            continue
+        try:
+            key = os.path.realpath(path)
+        except OSError:
+            key = path
+        if key in seen:
+            continue
+        seen.add(key)
+        try:
+            with open(path, encoding="utf-8", errors="replace") as handle:
+                body = handle.read(FOLLOW_MAX_BYTES)
+        except OSError:
+            continue
+        collect(strip_comments(body), depth + 1, seen, out)
+
+
+targets = []
+try:
+    collect(command, 0, set(), targets)
+except UnresolvedEnvSplit as error:
+    sys.stderr.write(str(error) + NEWLINE)
+    sys.exit(ENV_SPLIT_UNRESOLVED)
+for target in targets:
+    cleaned = target.strip().strip("'\"")
+    if cleaned:
+        print(cleaned)
+PY
+    analyzer_stderr="$(mktemp "${TMPDIR:-/tmp}/lisa-managed-edit-analyzer.XXXXXX")" || {
+      printf 'block-managed-file-edits: could not allocate analyzer stderr capture; Bash write protection is NOT active\n' >&2
+      exit 0
+    }
+    if write_targets="$(printf '%s' "$analyzer" |
+      MANAGED_EDIT_COMMAND="$command_str" \
+        MANAGED_EDIT_PROJECT="$project_root" \
+        python3 - 2>"$analyzer_stderr")"; then
+      analyzer_status=0
+    else
+      analyzer_status=$?
+    fi
+    if [ "$analyzer_status" -eq 42 ]; then
+      printf 'Blocked: cannot resolve env --split-string for managed-file protection.\n' >&2
+      printf 'Use an explicit command without split-string escapes, comments or variable expansion.\n' >&2
+      while IFS= read -r analyzer_line; do
+        [ -n "$analyzer_line" ] && printf '  %s\n' "$analyzer_line" >&2
+      done <"$analyzer_stderr"
+      rm -f "$analyzer_stderr"
+      exit 2
+    fi
+    if [ "$analyzer_status" -ne 0 ]; then
+      printf 'block-managed-file-edits: Bash analyzer failed (exit %s); Bash write protection is NOT active\n' "$analyzer_status" >&2
+      while IFS= read -r analyzer_line; do
+        [ -n "$analyzer_line" ] && printf '  python3: %s\n' "$analyzer_line" >&2
+      done <"$analyzer_stderr"
+      rm -f "$analyzer_stderr"
+      exit 0
+    fi
+    rm -f "$analyzer_stderr"
+    while IFS= read -r token; do
+      [ -n "$token" ] || continue
+      if source_path="$(managed_source "$token")"; then
+        refuse "$token" "$source_path" "$(relative_path "$token")"
+      fi
+    done <<EOF
+$write_targets
+EOF
+    ;;
+esac
+
+exit 0