@classytic/labs 0.2.0 → 0.3.0

package/dist/physics/alternating-current/preset.mjs

@@ -0,0 +1,1068 @@
+'use client';
+
+import { Tex } from "../../core/tex.mjs";
+import { ActivitySelect, Segmented, Slider } from "../../kit/controls.mjs";
+import { Field, Readout, Stat, StatList } from "../../kit/frame.mjs";
+import { AuthoredActivityRuntime, AuthoredMetricGate } from "../../kit/authored-activity-runtime.mjs";
+import { Figure, HUE, fmt } from "../../kit/figure/figure.mjs";
+import { FigText } from "../../kit/figure/text.mjs";
+import { Ball, Block } from "../../kit/figure/body.mjs";
+import { Arrow, Track } from "../../kit/figure/beam.mjs";
+import { Area, Curve, Guide, Marker, PlotFrame, scale } from "../../kit/figure/plot.mjs";
+import { acPeriodS, acRectifiedTrace, acState, acWaveTrace, meanRectifiedVoltage } from "./core.mjs";
+import { useState } from "react";
+import { Fragment as Fragment$1, jsx, jsxs } from "react/jsx-runtime";
+
+//#region src/physics/alternating-current/preset.tsx
+/**
+* AlternatingCurrentLab, Cambridge A Level Physics 9702 chapter 21 (alternating currents).
+*
+* One circuit, a sinusoidal supply across a resistor, drawn beside one plot with three views:
+*
+*   waveform       v = V0 sin(2 pi f t) and i = v / R, the period T = 1/f and both peaks
+*   r.m.s.         v faint, v squared, the MEASURED mean of v squared, and V_rms = root of it
+*   rectification  one diode or a bridge, then a capacitor that turns ripple into a steady line
+*
+* The middle view is the point of the lab. Learners are handed V_rms = V0 / sqrt(2) as a fact and
+* usually guess it is an average of the wave. It is not: the mean of v over a cycle is zero. The
+* plot squares the wave first, so every value is positive, draws the mean of that square (a real
+* number added up by `meanSquareByIntegration`, not the formula), then takes the root. The result
+* is the steady d.c. voltage that would heat the same resistor at the same rate, and the readout
+* says so in watts.
+*
+* All the physics lives in `core.ts`, outside React and free of clocks and random numbers, so the
+* server and the browser draw identical paths.
+*/
+const W = 720;
+const H = 400;
+/** Two stacked plots share one time axis: ticks and the axis label sit on the lower one. */
+const PLOT_TOP = {
+	x: 322,
+	y: 62,
+	w: 376,
+	h: 118
+};
+const PLOT_BOT = {
+	x: 322,
+	y: 240,
+	w: 376,
+	h: 114
+};
+/** The single tall plot the rectification view uses. */
+const PLOT_ONE = {
+	x: 322,
+	y: 66,
+	w: 376,
+	h: 268
+};
+const LOOP = {
+	left: 70,
+	right: 252,
+	top: 118,
+	bottom: 298
+};
+const SRC = {
+	cx: 70,
+	cy: 208,
+	r: 24
+};
+const RES = {
+	x: 236,
+	y: 176,
+	w: 32,
+	h: 64
+};
+const RECT_X = 150;
+const CAP_X = 206;
+const V0_MIN = 5;
+const V0_MAX = 400;
+const F_MIN = 5;
+const F_MAX = 200;
+const R_MIN = 10;
+const R_MAX = 500;
+const C_MAX_UF = 5e3;
+/**
+* Four significant figures, without trailing zeros. Four rather than three because the numbers
+* this lab is judged on are read directly: 229.8 V, not 230 V, and 1056 W, not 1060 W.
+*/
+const num = (value, digits = 4) => Number(value.toPrecision(digits)).toString();
+/**
+* A large V² value, grouped in threes so 52813 reads as 52 813.
+*
+* The value is settled to ten significant figures first. The measured mean square arrives from
+* Simpson's rule as 52812.499999999985 while the algebra gives exactly 52812.5, and rounding
+* those two straight to an integer would print 52 812 beside 52 813 in the same panel. The lab's
+* whole claim is that they are the SAME number, so the last few float bits must not show.
+*/
+const grouped = (value) => {
+	const settled = Number(value.toPrecision(10));
+	const rounded = Math.abs(settled) >= 100 ? Math.round(settled) : Number(settled.toFixed(1));
+	return String(rounded).replace(/\B(?=(\d{3})+(?!\d))/g, " ");
+};
+/** An axis tick with a real minus sign rather than a hyphen. */
+const tick = (value, digits = 1) => value < 0 ? `−${fmt(-value, digits)}` : fmt(value, digits);
+function Wire({ x1, y1, x2, y2 }) {
+	return /* @__PURE__ */ jsx(Curve, {
+		points: [[x1, y1], [x2, y2]],
+		color: HUE.metal,
+		weight: "edge"
+	});
+}
+/** The a.c. source symbol: a ring with one cycle of a sine drawn inside it. */
+function AcSource({ cx, cy, r }) {
+	const ring = `M ${cx - r} ${cy} A ${r} ${r} 0 1 0 ${cx + r} ${cy} A ${r} ${r} 0 1 0 ${cx - r} ${cy}`;
+	const wave = Array.from({ length: 33 }, (_, k) => {
+		const u = k / 32;
+		return [cx - r * .62 + u * r * 1.24, cy - Math.sin(u * 2 * Math.PI) * r * .4];
+	});
+	return /* @__PURE__ */ jsxs(Fragment$1, { children: [/* @__PURE__ */ jsx(Track, {
+		d: ring,
+		color: HUE.ink,
+		weight: "edge",
+		dashed: false
+	}), /* @__PURE__ */ jsx(Curve, {
+		points: wave,
+		color: HUE[1],
+		weight: "line"
+	})] });
+}
+/**
+* A diode: the filled triangle points the way conventional current may pass, and the bar is the
+* wall it cannot pass backwards through. The triangle is an `Area` closed onto its own base, so
+* the schematic still uses nothing but figure-kit primitives.
+*/
+function Diode({ x, y, w, h }) {
+	const half = h / 2;
+	return /* @__PURE__ */ jsxs(Fragment$1, { children: [/* @__PURE__ */ jsx(Area, {
+		points: [
+			[x, y - half],
+			[x + w, y],
+			[x, y + half]
+		],
+		baseY: y + half,
+		color: HUE[1],
+		opacity: 100
+	}), /* @__PURE__ */ jsx(Curve, {
+		points: [[x + w, y - half], [x + w, y + half]],
+		color: HUE[1],
+		weight: "edge"
+	})] });
+}
+const AC_ACTIVITY = {
+	pattern: "investigation",
+	title: "Alternating current: the value that does the heating",
+	objectives: [
+		"Read the period T and the peak value V0 from a sinusoidal supply",
+		"Explain V_rms as the steady d.c. voltage that delivers the same mean power",
+		"Calculate mean power as V_rms squared over R, which is V0 squared over 2R",
+		"Describe how a diode and a smoothing capacitor turn a.c. into a nearly steady d.c."
+	],
+	steps: [
+		{
+			id: "predict",
+			phase: "predict",
+			title: "Predict the steady voltage that matches",
+			lead: "Answer before you touch a slider.",
+			success: "predict-answer"
+		},
+		{
+			id: "act",
+			phase: "act",
+			title: "Open the r.m.s. view",
+			lead: "Switch the view to r.m.s. The wave is squared, and the mean of that square is drawn as a line.",
+			controls: true,
+			reveal: ["model"],
+			success: "rms-opened"
+		},
+		{
+			id: "observe",
+			phase: "observe",
+			title: "Change the supply and watch the power",
+			lead: "Move the peak voltage or the resistance. Watch the mean power, and watch how V_rms keeps the same ratio to V0.",
+			controls: true,
+			reveal: ["model", "evidence"],
+			success: "supply-changed"
+		},
+		{
+			id: "explain",
+			phase: "explain",
+			title: "Say why the root of the mean square",
+			lead: "Choose the statement that matches what the two graphs show.",
+			success: "explain-answer"
+		},
+		{
+			id: "transfer",
+			phase: "transfer",
+			title: "Rectify and smooth it",
+			lead: "Switch to rectifying, then raise the capacitance until the ripple is small.",
+			controls: true,
+			reveal: ["model", "evidence"],
+			success: "smoothing-added"
+		}
+	],
+	questions: [{
+		id: "equal-heating",
+		prompt: "A mains supply has a peak voltage of 325 V. A heater is plugged into it. Which steady d.c. voltage would make the same heater just as hot?",
+		choices: [
+			{
+				value: "325",
+				label: "325 V, the peak value"
+			},
+			{
+				value: "230",
+				label: "about 230 V"
+			},
+			{
+				value: "0",
+				label: "0 V, because the mean of the wave is zero"
+			},
+			{
+				value: "163",
+				label: "163 V, half of the peak"
+			}
+		],
+		answer: "230",
+		explain: "The supply spends most of the cycle below its peak, so 325 V of steady d.c. would be too hot. It is never at 0 V for long either. The matching steady value is 325 / sqrt(2) = 230 V, and that is what r.m.s. means."
+	}, {
+		id: "why-root-two",
+		prompt: "Why is the r.m.s. voltage V0 / sqrt(2) rather than the average height of the wave?",
+		choices: [
+			{
+				value: "heating",
+				label: "The mean of v is zero, so we square v first. V_rms is the root of the mean square, and it matches the heating."
+			},
+			{
+				value: "average",
+				label: "It is the average height of the sine curve over one cycle."
+			},
+			{
+				value: "half",
+				label: "It is half the peak, because the wave is negative for half the cycle."
+			}
+		],
+		answer: "heating",
+		explain: "Power is v squared divided by R, so heating follows the square of the voltage. Square the wave, take the mean of that (it is V0 squared over 2), then take the root: V0 / sqrt(2)."
+	}],
+	success: [
+		{
+			id: "predict-answer",
+			source: "answer",
+			key: "equal-heating",
+			operator: "eq",
+			value: "230",
+			pendingLabel: "Choose the steady d.c. voltage that heats the same."
+		},
+		{
+			id: "rms-opened",
+			source: "metric",
+			key: "rmsOpened",
+			operator: "eq",
+			value: true,
+			pendingLabel: "Switch the view to r.m.s."
+		},
+		{
+			id: "supply-changed",
+			source: "metric",
+			key: "supplyChanged",
+			operator: "eq",
+			value: true,
+			pendingLabel: "Change the peak voltage or the resistance."
+		},
+		{
+			id: "explain-answer",
+			source: "answer",
+			key: "why-root-two",
+			operator: "eq",
+			value: "heating",
+			pendingLabel: "Say why we square the wave first."
+		},
+		{
+			id: "smoothing-added",
+			source: "metric",
+			key: "smoothingAdded",
+			operator: "eq",
+			value: true,
+			pendingLabel: "Switch to rectifying and add some capacitance."
+		}
+	]
+};
+function AlternatingCurrentLab({ peakVoltageV: peak0 = 325, frequencyHz: freq0 = 50, resistanceOhm: res0 = 50, capacitanceUf: cap0 = 1e3, rectifier: rectifier0 = "full", view: view0 = "waveform", title = "Alternating current: peak, r.m.s. and rectifying", prompt = "A sinusoidal supply drives a resistor. The wave swings between +V0 and -V0, so its mean is zero, yet the resistor still gets hot. The r.m.s. view shows which value does the heating.", objectives, activity = "alternating-current" } = {}) {
+	const activityId = typeof activity === "string" ? activity : "alternating-current";
+	const authoredActivity = typeof activity === "string" ? AC_ACTIVITY : activity;
+	const [peakVoltage, setPeakVoltage] = useState(peak0);
+	const [frequency, setFrequency] = useState(freq0);
+	const [resistance, setResistance] = useState(res0);
+	const [capacitanceUf, setCapacitanceUf] = useState(cap0);
+	const [rectifier, setRectifier] = useState(rectifier0);
+	const [view, setView] = useState(view0);
+	const supply = {
+		peakVoltageV: peakVoltage,
+		frequencyHz: frequency,
+		resistanceOhm: resistance
+	};
+	const state = acState(supply);
+	const periodMs = acPeriodS(frequency) * 1e3;
+	const spanMs = 2 * periodMs;
+	const wave = acWaveTrace(supply, 2, 160);
+	const timeTicks = [
+		0,
+		.5,
+		1,
+		1.5,
+		2
+	].map((k) => k * periodMs);
+	const scTop = scale(PLOT_TOP, [0, spanMs], [-1.15 * peakVoltage, 1.15 * peakVoltage]);
+	const vPoints = wave.map((p) => [scTop.x(p.t * 1e3), scTop.y(p.v)]);
+	const peakCurrent = state.peakCurrentA;
+	const scCurrent = scale(PLOT_BOT, [0, spanMs], [-1.15 * peakCurrent, 1.15 * peakCurrent]);
+	const iPoints = wave.map((p) => [scCurrent.x(p.t * 1e3), scCurrent.y(p.i)]);
+	const squareMax = peakVoltage * peakVoltage;
+	const scSquare = scale(PLOT_BOT, [0, spanMs], [0, 1.15 * squareMax]);
+	const squarePoints = wave.map((p) => [scSquare.x(p.t * 1e3), scSquare.y(p.v * p.v)]);
+	const meanSquareY = scSquare.y(state.meanSquareVoltageV2);
+	const rectified = acRectifiedTrace({
+		supply,
+		capacitanceF: capacitanceUf / 1e6,
+		rectifier,
+		cycles: 2,
+		samplesPerCycle: 180
+	});
+	const scRect = scale(PLOT_ONE, [0, spanMs], [-1.12 * peakVoltage, 1.16 * peakVoltage]);
+	const inputPoints = rectified.points.map((p) => [scRect.x(p.t * 1e3), scRect.y(p.input)]);
+	const rectifiedPoints = rectified.points.map((p) => [scRect.x(p.t * 1e3), scRect.y(p.rectified)]);
+	const outputPoints = rectified.points.map((p) => [scRect.x(p.t * 1e3), scRect.y(p.output)]);
+	const smoothing = capacitanceUf > 0;
+	const barePeak = meanRectifiedVoltage(peakVoltage, rectifier);
+	const rippleReadable = rectified.rippleV > .04 * peakVoltage;
+	const rippleX = scRect.x(1.25 * periodMs);
+	const isRect = view === "rectification";
+	const label = view === "waveform" ? `A supply of peak ${num(peakVoltage)} volts at ${num(frequency)} hertz across ${num(resistance)} ohms. Voltage and current are plotted against time; the period is ${num(periodMs)} milliseconds and the peak current is ${num(peakCurrent)} amperes.` : view === "rms" ? `The same supply, with the voltage above and the square of the voltage below. The mean of the square is ${grouped(state.meanSquareVoltageV2)} volts squared, and its square root, ${num(state.rmsVoltageV)} volts, is drawn on the voltage graph as the r.m.s. value.` : `The same supply through ${rectifier === "half" ? "one diode" : "a bridge of four diodes"} with ${smoothing ? `a ${num(capacitanceUf)} microfarad smoothing capacitor` : "no smoothing capacitor"}. The mean output is ${num(rectified.meanV)} volts with a ripple of ${num(rectified.rippleV)} volts.`;
+	const circuit = /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsx(FigText, {
+			x: 24,
+			y: 40,
+			size: "title",
+			children: "a.c. supply across R"
+		}),
+		/* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.left,
+			y1: LOOP.top,
+			x2: LOOP.left,
+			y2: SRC.cy - SRC.r
+		}),
+		/* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.left,
+			y1: SRC.cy + SRC.r,
+			x2: LOOP.left,
+			y2: LOOP.bottom
+		}),
+		/* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.left,
+			y1: LOOP.bottom,
+			x2: LOOP.right,
+			y2: LOOP.bottom
+		}),
+		/* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.right,
+			y1: LOOP.bottom,
+			x2: LOOP.right,
+			y2: RES.y + RES.h
+		}),
+		/* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.right,
+			y1: RES.y,
+			x2: LOOP.right,
+			y2: LOOP.top
+		}),
+		isRect ? /* @__PURE__ */ jsxs(Fragment$1, { children: [
+			/* @__PURE__ */ jsx(Wire, {
+				x1: LOOP.left,
+				y1: LOOP.top,
+				x2: rectifier === "half" ? RECT_X - 16 : RECT_X - 32,
+				y2: LOOP.top
+			}),
+			/* @__PURE__ */ jsx(Wire, {
+				x1: rectifier === "half" ? 166 : 182,
+				y1: LOOP.top,
+				x2: LOOP.right,
+				y2: LOOP.top
+			}),
+			rectifier === "half" ? /* @__PURE__ */ jsx(Diode, {
+				x: RECT_X - 16,
+				y: LOOP.top,
+				w: 32,
+				h: 26
+			}) : /* @__PURE__ */ jsx(Block, {
+				x: RECT_X - 32,
+				y: LOOP.top - 13,
+				w: 64,
+				h: 26,
+				color: HUE[1],
+				label: "bridge",
+				radius: 4
+			}),
+			/* @__PURE__ */ jsx(FigText, {
+				x: RECT_X,
+				y: LOOP.top - 22,
+				anchor: "middle",
+				size: "note",
+				tone: "soft",
+				children: rectifier === "half" ? "one diode" : "4 diodes"
+			})
+		] }) : /* @__PURE__ */ jsx(Wire, {
+			x1: LOOP.left,
+			y1: LOOP.top,
+			x2: LOOP.right,
+			y2: LOOP.top
+		}),
+		isRect && smoothing && /* @__PURE__ */ jsxs(Fragment$1, { children: [
+			/* @__PURE__ */ jsx(Wire, {
+				x1: CAP_X,
+				y1: LOOP.top,
+				x2: CAP_X,
+				y2: 192
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: [[CAP_X - 16, 192], [222, 192]],
+				color: HUE[2],
+				weight: "edge"
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: [[CAP_X - 16, 202], [222, 202]],
+				color: HUE[2],
+				weight: "edge"
+			}),
+			/* @__PURE__ */ jsx(Wire, {
+				x1: CAP_X,
+				y1: 202,
+				x2: CAP_X,
+				y2: LOOP.bottom
+			}),
+			/* @__PURE__ */ jsx(Ball, {
+				cx: CAP_X,
+				cy: LOOP.top,
+				r: 3.5,
+				color: HUE.metal
+			}),
+			/* @__PURE__ */ jsx(Ball, {
+				cx: CAP_X,
+				cy: LOOP.bottom,
+				r: 3.5,
+				color: HUE.metal
+			}),
+			/* @__PURE__ */ jsx(FigText, {
+				x: CAP_X - 20,
+				y: 201,
+				anchor: "end",
+				baseline: "middle",
+				size: "note",
+				tone: "hue-2",
+				children: "C"
+			})
+		] }),
+		/* @__PURE__ */ jsx(AcSource, {
+			cx: SRC.cx,
+			cy: SRC.cy,
+			r: SRC.r
+		}),
+		/* @__PURE__ */ jsxs(FigText, {
+			x: SRC.cx,
+			y: 258,
+			anchor: "middle",
+			size: "note",
+			tone: "soft",
+			children: [
+				"V₀ = ",
+				num(peakVoltage),
+				" V"
+			]
+		}),
+		/* @__PURE__ */ jsx(Block, {
+			...RES,
+			color: HUE[3],
+			label: "R",
+			radius: 4
+		}),
+		/* @__PURE__ */ jsxs(FigText, {
+			x: RES.x + RES.w,
+			y: 258,
+			anchor: "end",
+			size: "note",
+			tone: "soft",
+			children: [
+				"R = ",
+				num(resistance),
+				" Ω"
+			]
+		}),
+		/* @__PURE__ */ jsx(Arrow, {
+			x1: LOOP.left + 30,
+			y1: LOOP.bottom,
+			x2: isRect ? CAP_X - 30 : LOOP.right - 30,
+			y2: LOOP.bottom,
+			color: isRect ? HUE[2] : HUE.hot,
+			weight: "line",
+			head: 6,
+			double: !isRect,
+			label: isRect ? "one way only" : "i reverses"
+		})
+	] });
+	const waveformPlots = /* @__PURE__ */ jsxs(Fragment$1, { children: [/* @__PURE__ */ jsxs(PlotFrame, {
+		...PLOT_TOP,
+		arrows: false,
+		title: "voltage against time",
+		yLabel: "v (V)",
+		yTicks: [
+			-peakVoltage,
+			0,
+			peakVoltage
+		].map((v) => ({
+			at: scTop.y(v),
+			label: tick(v, 0)
+		})),
+		children: [
+			/* @__PURE__ */ jsx(Guide, {
+				x1: PLOT_TOP.x,
+				y1: scTop.y(0),
+				x2: PLOT_TOP.x + PLOT_TOP.w,
+				y2: scTop.y(0),
+				color: HUE.soft
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: vPoints,
+				color: HUE[1]
+			}),
+			/* @__PURE__ */ jsx(Marker, {
+				x: scTop.x(periodMs / 4),
+				y: scTop.y(peakVoltage),
+				r: 4.5,
+				color: HUE[1],
+				label: `V₀ = ${num(peakVoltage)} V`
+			}),
+			/* @__PURE__ */ jsx(Arrow, {
+				x1: scTop.x(0),
+				y1: PLOT_TOP.y + PLOT_TOP.h - 5,
+				x2: scTop.x(periodMs),
+				y2: PLOT_TOP.y + PLOT_TOP.h - 5,
+				color: HUE.hot,
+				weight: "line",
+				head: 6,
+				double: true,
+				label: `T = ${num(periodMs)} ms`,
+				labelSide: "right"
+			})
+		]
+	}), /* @__PURE__ */ jsxs(PlotFrame, {
+		...PLOT_BOT,
+		arrows: false,
+		title: "current against time",
+		xLabel: "time (ms)",
+		yLabel: "i (A)",
+		xTicks: timeTicks.map((v) => ({
+			at: scCurrent.x(v),
+			label: fmt(v, 1)
+		})),
+		yTicks: [
+			-peakCurrent,
+			0,
+			peakCurrent
+		].map((v) => ({
+			at: scCurrent.y(v),
+			label: tick(v, 2)
+		})),
+		children: [
+			/* @__PURE__ */ jsx(Guide, {
+				x1: PLOT_BOT.x,
+				y1: scCurrent.y(0),
+				x2: PLOT_BOT.x + PLOT_BOT.w,
+				y2: scCurrent.y(0),
+				color: HUE.soft
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: iPoints,
+				color: HUE[2]
+			}),
+			/* @__PURE__ */ jsx(Marker, {
+				x: scCurrent.x(periodMs / 4),
+				y: scCurrent.y(peakCurrent),
+				r: 4.5,
+				color: HUE[2],
+				label: `I₀ = ${num(peakCurrent)} A`
+			})
+		]
+	})] });
+	const rmsPlots = /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsxs(PlotFrame, {
+			...PLOT_TOP,
+			arrows: false,
+			title: "the wave, and the level that heats the same",
+			yLabel: "v (V)",
+			yTicks: [
+				-peakVoltage,
+				0,
+				peakVoltage
+			].map((v) => ({
+				at: scTop.y(v),
+				label: tick(v, 0)
+			})),
+			children: [
+				/* @__PURE__ */ jsx(Guide, {
+					x1: PLOT_TOP.x,
+					y1: scTop.y(0),
+					x2: PLOT_TOP.x + PLOT_TOP.w,
+					y2: scTop.y(0),
+					color: HUE.soft
+				}),
+				/* @__PURE__ */ jsx(Curve, {
+					points: vPoints,
+					color: HUE[1],
+					opacity: .4
+				}),
+				/* @__PURE__ */ jsx(Guide, {
+					x1: PLOT_TOP.x,
+					y1: scTop.y(state.rmsVoltageV),
+					x2: PLOT_TOP.x + PLOT_TOP.w,
+					y2: scTop.y(state.rmsVoltageV),
+					color: HUE.hot,
+					label: `V_rms = ${num(state.rmsVoltageV)} V`,
+					labelAnchor: "end"
+				}),
+				/* @__PURE__ */ jsx(Guide, {
+					x1: PLOT_TOP.x,
+					y1: scTop.y(-state.rmsVoltageV),
+					x2: PLOT_TOP.x + PLOT_TOP.w,
+					y2: scTop.y(-state.rmsVoltageV),
+					color: HUE.hot
+				}),
+				/* @__PURE__ */ jsx(FigText, {
+					x: PLOT_TOP.x + 8,
+					y: scTop.y(0) - 7,
+					size: "note",
+					tone: "soft",
+					children: "the mean of v is zero"
+				})
+			]
+		}),
+		/* @__PURE__ */ jsxs(FigText, {
+			x: PLOT_BOT.x,
+			y: 206,
+			size: "label",
+			tone: "hot",
+			children: [
+				"√(",
+				grouped(state.meanSquareVoltageV2),
+				" V²) = ",
+				num(state.rmsVoltageV),
+				" V, the line above"
+			]
+		}),
+		/* @__PURE__ */ jsxs(PlotFrame, {
+			...PLOT_BOT,
+			arrows: false,
+			title: "square it first: v² (V²) is never negative",
+			xLabel: "time (ms)",
+			xTicks: timeTicks.map((v) => ({
+				at: scSquare.x(v),
+				label: fmt(v, 1)
+			})),
+			yTicks: [
+				{
+					at: scSquare.y(0),
+					label: "0"
+				},
+				{
+					at: meanSquareY,
+					label: "V₀²/2"
+				},
+				{
+					at: scSquare.y(squareMax),
+					label: "V₀²"
+				}
+			],
+			children: [
+				/* @__PURE__ */ jsx(Area, {
+					points: squarePoints,
+					baseY: PLOT_BOT.y + PLOT_BOT.h,
+					color: HUE[2],
+					opacity: 20
+				}),
+				/* @__PURE__ */ jsx(Curve, {
+					points: squarePoints,
+					color: HUE[2]
+				}),
+				/* @__PURE__ */ jsx(Guide, {
+					x1: PLOT_BOT.x,
+					y1: meanSquareY,
+					x2: PLOT_BOT.x + PLOT_BOT.w,
+					y2: meanSquareY,
+					color: HUE.hot,
+					label: `mean of v² = ${grouped(state.meanSquareVoltageV2)} V²`,
+					labelAnchor: "end"
+				})
+			]
+		})
+	] });
+	const rectificationPlot = /* @__PURE__ */ jsxs(PlotFrame, {
+		...PLOT_ONE,
+		arrows: false,
+		title: `voltage across R: ${rectifier === "half" ? "one diode" : "bridge"}${smoothing ? ` + ${num(capacitanceUf)} µF` : ", no capacitor"}`,
+		xLabel: "time (ms)",
+		yLabel: "v (V)",
+		xTicks: timeTicks.map((v) => ({
+			at: scRect.x(v),
+			label: fmt(v, 1)
+		})),
+		yTicks: [
+			-peakVoltage,
+			0,
+			peakVoltage
+		].map((v) => ({
+			at: scRect.y(v),
+			label: tick(v, 0)
+		})),
+		children: [
+			/* @__PURE__ */ jsx(Guide, {
+				x1: PLOT_ONE.x,
+				y1: scRect.y(0),
+				x2: PLOT_ONE.x + PLOT_ONE.w,
+				y2: scRect.y(0),
+				color: HUE.soft
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: inputPoints,
+				color: HUE.soft,
+				weight: "line",
+				dashed: true,
+				opacity: .5
+			}),
+			smoothing && /* @__PURE__ */ jsx(Curve, {
+				points: rectifiedPoints,
+				color: HUE[1],
+				weight: "line",
+				opacity: .45
+			}),
+			/* @__PURE__ */ jsx(Curve, {
+				points: outputPoints,
+				color: HUE[2]
+			}),
+			/* @__PURE__ */ jsx(Guide, {
+				x1: PLOT_ONE.x,
+				y1: scRect.y(rectified.meanV),
+				x2: PLOT_ONE.x + PLOT_ONE.w,
+				y2: scRect.y(rectified.meanV),
+				color: HUE.warn,
+				label: `mean = ${num(rectified.meanV)} V`,
+				labelAnchor: "end"
+			}),
+			rippleReadable && /* @__PURE__ */ jsxs(Fragment$1, { children: [/* @__PURE__ */ jsx(Arrow, {
+				x1: rippleX,
+				y1: scRect.y(rectified.maxV),
+				x2: rippleX,
+				y2: scRect.y(rectified.minV),
+				color: HUE.hot,
+				weight: "line",
+				head: 6,
+				double: true
+			}), /* @__PURE__ */ jsxs(FigText, {
+				x: rippleX + 8,
+				y: scRect.y(rectified.minV) + 16,
+				size: "note",
+				tone: "hot",
+				children: [
+					"ripple ",
+					num(rectified.rippleV),
+					" V"
+				]
+			})] }),
+			/* @__PURE__ */ jsx(FigText, {
+				x: PLOT_ONE.x + 8,
+				y: scRect.y(-.72 * peakVoltage),
+				size: "note",
+				tone: "soft",
+				children: "supply before the diodes"
+			})
+		]
+	});
+	const figure = /* @__PURE__ */ jsxs(Figure, {
+		viewBox: [W, H],
+		domain: "physics",
+		label,
+		children: [
+			circuit,
+			view === "waveform" && waveformPlots,
+			view === "rms" && rmsPlots,
+			view === "rectification" && rectificationPlot
+		]
+	});
+	const evidence = view === "waveform" ? /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsx(Readout, {
+			label: "one whole cycle",
+			value: `T = ${num(periodMs)} ms`,
+			sub: "T = 1/f. The supply repeats this pattern f times every second."
+		}),
+		/* @__PURE__ */ jsxs(StatList, { children: [
+			/* @__PURE__ */ jsx(Stat, {
+				label: "frequency f",
+				value: `${num(frequency)} Hz`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "peak voltage V₀",
+				value: `${num(peakVoltage)} V`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "peak current I₀ = V₀/R",
+				value: `${num(peakCurrent)} A`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "resistance R",
+				value: `${num(resistance)} Ω`
+			})
+		] }),
+		/* @__PURE__ */ jsxs("div", {
+			className: "physics-probe",
+			children: [/* @__PURE__ */ jsx("strong", {
+				className: "physics-equation-result",
+				children: /* @__PURE__ */ jsx(Tex, { tex: `i(t)=\\frac{v(t)}{R}=\\frac{${num(peakVoltage)}\\sin(2\\pi\\times ${num(frequency)}\\,t)}{${num(resistance)}}` })
+			}), /* @__PURE__ */ jsx("small", { children: "R does not change during the cycle, so i is just v scaled down. The two curves cross zero together and peak together." })]
+		})
+	] }) : view === "rms" ? /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsx(Readout, {
+			label: "the value that does the heating",
+			value: `V_rms = ${num(state.rmsVoltageV)} V`,
+			sub: `A steady ${num(state.rmsVoltageV)} V d.c. across the same ${num(resistance)} Ω would deliver exactly the same mean power.`
+		}),
+		/* @__PURE__ */ jsxs(StatList, { children: [
+			/* @__PURE__ */ jsx(Stat, {
+				label: "mean of v², added up",
+				value: `${grouped(state.meanSquareVoltageV2)} V²`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "V₀²/2, from the algebra",
+				value: `${grouped(state.meanSquareExactV2)} V²`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "I_rms = V_rms/R",
+				value: `${num(state.rmsCurrentA)} A`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "mean power P",
+				value: `${num(state.meanPowerW)} W`,
+				tone: "good"
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "peak power (twice the mean)",
+				value: `${num(state.peakPowerW)} W`
+			})
+		] }),
+		/* @__PURE__ */ jsxs("div", {
+			className: "physics-probe",
+			children: [/* @__PURE__ */ jsx("strong", {
+				className: "physics-equation-result",
+				children: /* @__PURE__ */ jsx(Tex, { tex: `V_{rms}=\\sqrt{\\overline{v^2}}=\\frac{V_0}{\\sqrt2}=${num(state.rmsVoltageV)}\\,\\mathrm{V}\\qquad P=\\frac{V_{rms}^2}{R}=\\frac{V_0^2}{2R}=${num(state.meanPowerW)}\\,\\mathrm{W}` })
+			}), /* @__PURE__ */ jsx("small", { children: "Both stats above are the same number: one is counted off the graph, the other comes from the algebra. That agreement is the whole proof." })]
+		})
+	] }) : /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsx(Readout, {
+			label: "output across R",
+			value: `mean ${num(rectified.meanV)} V, ripple ${num(rectified.rippleV)} V`,
+			sub: smoothing ? `The capacitor holds the voltage up between peaks. R C = ${num(rectified.timeConstantS * 1e3)} ms against a gap of ${num(1e3 / rectified.rippleFrequencyHz)} ms.` : "With no capacitor the output falls to zero after every peak, so the ripple is the full peak value."
+		}),
+		/* @__PURE__ */ jsxs(StatList, { children: [
+			/* @__PURE__ */ jsx(Stat, {
+				label: "ripple frequency",
+				value: `${num(rectified.rippleFrequencyHz)} Hz`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: rectifier === "half" ? "mean with no capacitor, V₀/π" : "mean with no capacitor, 2V₀/π",
+				value: `${num(barePeak)} V`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "capacitance C",
+				value: `${num(capacitanceUf)} µF`
+			}),
+			/* @__PURE__ */ jsx(Stat, {
+				label: "time constant R C",
+				value: `${num(rectified.timeConstantS * 1e3)} ms`
+			})
+		] }),
+		/* @__PURE__ */ jsxs("div", {
+			className: "physics-probe",
+			children: [/* @__PURE__ */ jsx("strong", {
+				className: "physics-equation-result",
+				children: /* @__PURE__ */ jsx(Tex, { tex: rectifier === "half" ? `\\overline{v_{out}}=\\frac{V_0}{\\pi}=${num(barePeak)}\\,\\mathrm{V}` : `\\overline{v_{out}}=\\frac{2V_0}{\\pi}=${num(barePeak)}\\,\\mathrm{V}` })
+			}), /* @__PURE__ */ jsx("small", { children: "That is the mean HEIGHT of the rectified wave, not an r.m.s. value. A capacitor raises the mean towards V₀ by filling in the gaps." })]
+		})
+	] });
+	const controls = /* @__PURE__ */ jsxs(Fragment$1, { children: [
+		/* @__PURE__ */ jsx(Field, {
+			label: "view",
+			children: /* @__PURE__ */ jsx(ActivitySelect, {
+				ariaLabel: "view",
+				value: view,
+				onChange: setView,
+				options: [
+					{
+						value: "waveform",
+						label: "waveform"
+					},
+					{
+						value: "rms",
+						label: "r.m.s."
+					},
+					{
+						value: "rectification",
+						label: "rectifying"
+					}
+				]
+			})
+		}),
+		/* @__PURE__ */ jsx(Field, {
+			label: "peak voltage",
+			value: `${num(peakVoltage)} V`,
+			children: /* @__PURE__ */ jsx(Slider, {
+				value: peakVoltage,
+				min: V0_MIN,
+				max: V0_MAX,
+				step: 5,
+				onChange: setPeakVoltage,
+				ariaLabel: "peak voltage in volts"
+			})
+		}),
+		/* @__PURE__ */ jsx(Field, {
+			label: "frequency",
+			value: `${num(frequency)} Hz`,
+			children: /* @__PURE__ */ jsx(Slider, {
+				value: frequency,
+				min: F_MIN,
+				max: F_MAX,
+				step: 5,
+				onChange: setFrequency,
+				ariaLabel: "frequency in hertz"
+			})
+		}),
+		/* @__PURE__ */ jsx(Field, {
+			label: "resistance",
+			value: `${num(resistance)} Ω`,
+			children: /* @__PURE__ */ jsx(Slider, {
+				value: resistance,
+				min: R_MIN,
+				max: R_MAX,
+				step: 10,
+				onChange: setResistance,
+				ariaLabel: "resistance in ohms"
+			})
+		}),
+		isRect && /* @__PURE__ */ jsx(Field, {
+			label: "rectifier",
+			children: /* @__PURE__ */ jsx(Segmented, {
+				ariaLabel: "rectifier",
+				value: rectifier,
+				onChange: setRectifier,
+				options: [{
+					value: "half",
+					label: "one diode"
+				}, {
+					value: "full",
+					label: "bridge"
+				}]
+			})
+		}),
+		isRect && /* @__PURE__ */ jsx(Field, {
+			label: "capacitance",
+			value: `${num(capacitanceUf)} µF`,
+			children: /* @__PURE__ */ jsx(Slider, {
+				value: capacitanceUf,
+				min: 0,
+				max: C_MAX_UF,
+				step: 100,
+				onChange: setCapacitanceUf,
+				ariaLabel: "smoothing capacitance in microfarads"
+			})
+		})
+	] });
+	return /* @__PURE__ */ jsx(AuthoredActivityRuntime, {
+		focusLayout: "immersive",
+		activity: {
+			...authoredActivity,
+			objectives: objectives ?? authoredActivity.objectives
+		},
+		activityId,
+		eyebrow: "Alternating currents",
+		title,
+		description: prompt,
+		status: /* @__PURE__ */ jsxs(Fragment$1, { children: [
+			/* @__PURE__ */ jsxs("span", { children: [
+				"V₀ ",
+				num(peakVoltage),
+				" V"
+			] }),
+			/* @__PURE__ */ jsxs("span", { children: [
+				"V_rms ",
+				num(state.rmsVoltageV),
+				" V"
+			] }),
+			/* @__PURE__ */ jsxs("span", { children: [
+				"P ",
+				num(state.meanPowerW),
+				" W"
+			] })
+		] }),
+		evidence,
+		controls,
+		observation: view === "waveform" ? "The supply takes T seconds to complete one cycle, and T = 1/f. The current curve is the voltage curve divided by R, so both reach zero together and both reach their peak together." : view === "rms" ? "The lower graph is the upper one squared, so it never goes below zero. Its mean sits at exactly half of V₀², whatever V₀ is. Take the square root of that mean and you get V_rms, the steady d.c. voltage that would heat this resistor at the same rate." : "The diodes remove the negative halves, so the current in R now flows one way only. The capacitor charges to the peak and then leaks slowly through R, so the output sags a little between peaks instead of falling to zero. More capacitance, or more resistance, means less ripple.",
+		transcript: /* @__PURE__ */ jsxs("p", { children: [
+			"Peak ",
+			num(peakVoltage),
+			" V at ",
+			num(frequency),
+			" Hz across ",
+			num(resistance),
+			" Ω. Period ",
+			num(periodMs),
+			" ",
+			"ms, peak current ",
+			num(peakCurrent),
+			" A. Mean of v² is ",
+			grouped(state.meanSquareVoltageV2),
+			" V², so V_rms is ",
+			num(state.rmsVoltageV),
+			" V and the mean power is ",
+			num(state.meanPowerW),
+			" W. Rectified by",
+			" ",
+			rectifier === "half" ? "one diode" : "a bridge",
+			" with ",
+			num(capacitanceUf),
+			" µF: mean",
+			" ",
+			num(rectified.meanV),
+			" V, ripple ",
+			num(rectified.rippleV),
+			" V at ",
+			num(rectified.rippleFrequencyHz),
+			" ",
+			"Hz."
+		] }),
+		children: ({ complete }) => /* @__PURE__ */ jsxs(Fragment$1, { children: [
+			/* @__PURE__ */ jsx(AuthoredMetricGate, {
+				conditionId: "rms-opened",
+				met: view === "rms",
+				complete
+			}),
+			/* @__PURE__ */ jsx(AuthoredMetricGate, {
+				conditionId: "supply-changed",
+				met: peakVoltage !== peak0 || resistance !== res0,
+				complete
+			}),
+			/* @__PURE__ */ jsx(AuthoredMetricGate, {
+				conditionId: "smoothing-added",
+				met: isRect && capacitanceUf > 0,
+				complete
+			}),
+			figure
+		] })
+	});
+}
+
+//#endregion
+export { AlternatingCurrentLab };