@byteplus/pulumi-bytepluscc 0.0.19 → 0.0.21

package/tls/topic.d.ts

@@ -2,7 +2,7 @@ import * as pulumi from "@pulumi/pulumi";
 import * as inputs from "../types/input";
 import * as outputs from "../types/output";
 /**
- * 日志主题是日志服务进行日志管理的基本单位，日志接入、检索分析、消费等功能都是基于日志主题的粒度进行操作。
+ * Log topic is the basic unit for log management in the log service. Log ingestion, search and analysis, and consumption are all performed at the log topic level.
  *
  * ## Example Usage
  *
@@ -56,84 +56,84 @@ export declare class Topic extends pulumi.CustomResource {
      */
     static isInstance(obj: any): obj is Topic;
     /**
-     * 指定日志主题是否已开启了 Kafka 协议消费功能。true：已开启。false：未开启。
+     * Indicates whether Kafka protocol consumption is enabled for the log topic. true: enabled. false: not enabled.
      */
     readonly allowConsume: pulumi.Output<boolean>;
     /**
-     * 归档存储时长。该时长取值范围为 60~3650。满足如下任一条件时，可实现归档存储。标准存储时长 30 天及以上。标准存储时长 7 天及以上且低频存储时长 30 天及以上。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Archive storage duration. The value range is 60~3650. Archive storage can be enabled if any of the following conditions are met: Standard storage duration is 30 days or longer; standard storage duration is 7 days or longer and infrequent storage duration is 30 days or longer. This parameter is only effective when EnableHotTtl is set to true.
      */
     readonly archiveTtl: pulumi.Output<number>;
     /**
-     * 是否开启分区的自动分裂功能。true：当写入的数据量连续 5 分钟超过已有分区服务能力时，日志服务会根据数据量自动分裂分区以满足业务需求，但分裂后的分区数量不可超出最大分裂数。最近 15 分钟内分裂出来的新分区不会自动分裂。false：不开启分区的自动分裂。
+     * Enable automatic partition splitting. true: If the amount of data written exceeds the capacity of existing partitions for 5 consecutive minutes, the log service will automatically split partitions based on data volume to meet business needs, but the number of partitions after splitting cannot exceed the maximum split limit. New partitions created within the last 15 minutes will not be automatically split. false: Disable automatic partition splitting.
      */
     readonly autoSplit: pulumi.Output<boolean>;
     /**
-     * 低频存储时长。该时长取值范围为 30~3650。标准存储时长 7 天及以上可实现低频存储。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Low-frequency storage duration. Value range: 30–3650. Low-frequency storage is available when standard storage duration is 7 days or longer. This parameter is effective only when EnableHotTtl is true.
      */
     readonly coldTtl: pulumi.Output<number>;
     /**
-     * Kafka 协议消费主题 ID，格式为 out+日志主题 ID。通过 Kafka 协议消费此日志主题中的日志数据时，Topic 应指定为此 ID。
+     * Kafka protocol consumption topic ID, formatted as out+log topic ID. When consuming log data from this log topic via the Kafka protocol, set Topic to this ID.
      */
     readonly consumeTopic: pulumi.Output<string>;
     /**
-     * 日志主题创建时间。
+     * Log topic creation time.
      */
     readonly createdTime: pulumi.Output<string>;
     /**
-     * 日志主题描述信息。不支持 <>、'、\、\、所有 emoji 表情符号。长度为 0~64 个字符。
+     * Log topic description. Does not support <>, ', \, \, or any emoji symbols. Length: 0–64 characters.
      */
     readonly description: pulumi.Output<string>;
     /**
-     * 是否开启分层存储。开启后，日志服务支持标准存储、低频存储和归档存储。设置 HotTtl、ArchiveTtl、ColdTtl 后，如果数据存储时间超过对应时长，那么数据会自动沉降至低频存储、归档存储进行后续保存，直到日志采集到服务端的总时长达到 Ttl 时，被后端服务自动清理。
+     * Enable tiered storage. When enabled, the log service supports standard storage, low-frequency storage, and archive storage. After setting HotTtl, ArchiveTtl, and ColdTtl, if data storage duration exceeds the corresponding value, data will automatically move to low-frequency or archive storage for continued retention until the total log retention duration reaches Ttl, after which backend services will automatically clean up the data.
      */
     readonly enableHotTtl: pulumi.Output<boolean>;
     /**
-     * 是否开启 WebTracking 功能，开启后，可以通过 WebTracking 快速采集前端埋点数据。true：开启 WebTracking功能。false：（默认）关闭 WebTracking 功能。为日志主题开启 Web Tracking 后，通过 API 接口 WebTracks 写入数据时无需经过鉴权，相当于面向公网开放了匿名写入权限，可能产生脏数据。
+     * Enable WebTracking. When enabled, you can quickly collect frontend tracking data using WebTracking. true: Enable WebTracking. false (default): Disable WebTracking. After enabling Web Tracking for the log topic, data written via the WebTracks API does not require authentication, which grants anonymous write access to the public network and may result in dirty data.
      */
     readonly enableTracking: pulumi.Output<boolean>;
     /**
-     * 标准存储时长。该时长默认为 30 天，取值范围为 7~3650。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Standard storage duration. Default is 30 days; value range: 7–3650. This parameter is effective only when EnableHotTtl is true.
      */
     readonly hotTtl: pulumi.Output<number>;
     /**
-     * 是否开启记录外网 IP 功能。默认为开启状态。开启后日志服务会自动在日志内容中添加以下元数据字段。**tag****client_ip**：日志来源设备的公网 IP 地址。使用日志服务的私网域名写入日志数据时，则记录私网 IP 地址。**tag****receive_time**：日志达到服务端的时间，格式为 10 位的 Unixtime 时间戳。
+     * Enable external IP recording. Enabled by default. When enabled, the log service automatically adds the following metadata fields to the log content: **tag****client_ip**: Public IP address of the device sending the log. If logs are written using the log service's private domain name, the private IP address is recorded. **tag****receive_time**: Time when the log reaches the server, formatted as a 10-digit Unix timestamp.
      */
     readonly logPublicIp: pulumi.Output<boolean>;
     /**
-     * 分区的最大分裂数，即分区分裂后，所有分区的最大数量。取值范围为 1~256，默认为 256。仅在开启自动分裂日志分区，即 AutoSplit 为 true 时必选。MaxSplitShard 必须大于指定的 ShardCount，否则日志服务无法自动分裂分区。
+     * Maximum partition split count, which is the maximum number of partitions after splitting. Value range: 1–256, default is 256. Required only when automatic log partition splitting is enabled (AutoSplit is true). MaxSplitShard must be greater than the specified ShardCount; otherwise, the log service cannot automatically split partitions.
      */
     readonly maxSplitShard: pulumi.Output<number>;
     /**
-     * 日志主题所属的日志项目 ID。
+     * Log project ID to which the log topic belongs.
      */
     readonly projectId: pulumi.Output<string>;
     /**
-     * 日志分区的数量，默认创建 1 个分区，取值范围为 1～10。 每个分区提供的写入能力为 5MiB/s、500 次/s，读取能力为 20 MiB/s、100 次/s。请在创建日志主题时合理规划分区，创建后暂不支持修改分区数量。
+     * Number of log partitions. By default, 1 partition is created; value range: 1–10. Each partition provides write capacity of 5 MiB/s, 500 ops/s, and read capacity of 20 MiB/s, 100 ops/s. Plan partitions appropriately when creating a log topic; partition count cannot be modified after creation.
      */
     readonly shardCount: pulumi.Output<number>;
     readonly tags: pulumi.Output<outputs.tls.TopicTag[]>;
     /**
-     * 时间格式
+     * Time format
      */
     readonly timeFormat: pulumi.Output<string>;
     /**
-     * 时间字段名
+     * Time field name
      */
     readonly timeKey: pulumi.Output<string>;
     /**
-     * 日志主题 ID。
+     * Log topic ID.
      */
     readonly topicId: pulumi.Output<string>;
     /**
-     * 日志主题名称。
+     * Log topic name.
      */
     readonly topicName: pulumi.Output<string>;
     /**
-     * 日志在日志服务中的总保存时间，超过指定的日志存储时长后，此日志主题中的过期日志会被自动清除。单位为天，默认为 30 天。取值范围为 1～3650，指定为 3650 天表示永久存储。
+     * Total log retention time in the log service. After the specified log storage duration is exceeded, expired logs in this log topic will be automatically cleared. Unit: days. Default is 30 days. Value range is 1–3650. Setting to 3650 days means permanent storage.
      */
     readonly ttl: pulumi.Output<number>;
     /**
-     * 日志主题修改时间。
+     * Log topic modification time.
      */
     readonly updatedTime: pulumi.Output<string>;
     /**
@@ -150,84 +150,84 @@ export declare class Topic extends pulumi.CustomResource {
  */
 export interface TopicState {
     /**
-     * 指定日志主题是否已开启了 Kafka 协议消费功能。true：已开启。false：未开启。
+     * Indicates whether Kafka protocol consumption is enabled for the log topic. true: enabled. false: not enabled.
      */
     allowConsume?: pulumi.Input<boolean>;
     /**
-     * 归档存储时长。该时长取值范围为 60~3650。满足如下任一条件时，可实现归档存储。标准存储时长 30 天及以上。标准存储时长 7 天及以上且低频存储时长 30 天及以上。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Archive storage duration. The value range is 60~3650. Archive storage can be enabled if any of the following conditions are met: Standard storage duration is 30 days or longer; standard storage duration is 7 days or longer and infrequent storage duration is 30 days or longer. This parameter is only effective when EnableHotTtl is set to true.
      */
     archiveTtl?: pulumi.Input<number>;
     /**
-     * 是否开启分区的自动分裂功能。true：当写入的数据量连续 5 分钟超过已有分区服务能力时，日志服务会根据数据量自动分裂分区以满足业务需求，但分裂后的分区数量不可超出最大分裂数。最近 15 分钟内分裂出来的新分区不会自动分裂。false：不开启分区的自动分裂。
+     * Enable automatic partition splitting. true: If the amount of data written exceeds the capacity of existing partitions for 5 consecutive minutes, the log service will automatically split partitions based on data volume to meet business needs, but the number of partitions after splitting cannot exceed the maximum split limit. New partitions created within the last 15 minutes will not be automatically split. false: Disable automatic partition splitting.
      */
     autoSplit?: pulumi.Input<boolean>;
     /**
-     * 低频存储时长。该时长取值范围为 30~3650。标准存储时长 7 天及以上可实现低频存储。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Low-frequency storage duration. Value range: 30–3650. Low-frequency storage is available when standard storage duration is 7 days or longer. This parameter is effective only when EnableHotTtl is true.
      */
     coldTtl?: pulumi.Input<number>;
     /**
-     * Kafka 协议消费主题 ID，格式为 out+日志主题 ID。通过 Kafka 协议消费此日志主题中的日志数据时，Topic 应指定为此 ID。
+     * Kafka protocol consumption topic ID, formatted as out+log topic ID. When consuming log data from this log topic via the Kafka protocol, set Topic to this ID.
      */
     consumeTopic?: pulumi.Input<string>;
     /**
-     * 日志主题创建时间。
+     * Log topic creation time.
      */
     createdTime?: pulumi.Input<string>;
     /**
-     * 日志主题描述信息。不支持 <>、'、\、\、所有 emoji 表情符号。长度为 0~64 个字符。
+     * Log topic description. Does not support <>, ', \, \, or any emoji symbols. Length: 0–64 characters.
      */
     description?: pulumi.Input<string>;
     /**
-     * 是否开启分层存储。开启后，日志服务支持标准存储、低频存储和归档存储。设置 HotTtl、ArchiveTtl、ColdTtl 后，如果数据存储时间超过对应时长，那么数据会自动沉降至低频存储、归档存储进行后续保存，直到日志采集到服务端的总时长达到 Ttl 时，被后端服务自动清理。
+     * Enable tiered storage. When enabled, the log service supports standard storage, low-frequency storage, and archive storage. After setting HotTtl, ArchiveTtl, and ColdTtl, if data storage duration exceeds the corresponding value, data will automatically move to low-frequency or archive storage for continued retention until the total log retention duration reaches Ttl, after which backend services will automatically clean up the data.
      */
     enableHotTtl?: pulumi.Input<boolean>;
     /**
-     * 是否开启 WebTracking 功能，开启后，可以通过 WebTracking 快速采集前端埋点数据。true：开启 WebTracking功能。false：（默认）关闭 WebTracking 功能。为日志主题开启 Web Tracking 后，通过 API 接口 WebTracks 写入数据时无需经过鉴权，相当于面向公网开放了匿名写入权限，可能产生脏数据。
+     * Enable WebTracking. When enabled, you can quickly collect frontend tracking data using WebTracking. true: Enable WebTracking. false (default): Disable WebTracking. After enabling Web Tracking for the log topic, data written via the WebTracks API does not require authentication, which grants anonymous write access to the public network and may result in dirty data.
      */
     enableTracking?: pulumi.Input<boolean>;
     /**
-     * 标准存储时长。该时长默认为 30 天，取值范围为 7~3650。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Standard storage duration. Default is 30 days; value range: 7–3650. This parameter is effective only when EnableHotTtl is true.
      */
     hotTtl?: pulumi.Input<number>;
     /**
-     * 是否开启记录外网 IP 功能。默认为开启状态。开启后日志服务会自动在日志内容中添加以下元数据字段。**tag****client_ip**：日志来源设备的公网 IP 地址。使用日志服务的私网域名写入日志数据时，则记录私网 IP 地址。**tag****receive_time**：日志达到服务端的时间，格式为 10 位的 Unixtime 时间戳。
+     * Enable external IP recording. Enabled by default. When enabled, the log service automatically adds the following metadata fields to the log content: **tag****client_ip**: Public IP address of the device sending the log. If logs are written using the log service's private domain name, the private IP address is recorded. **tag****receive_time**: Time when the log reaches the server, formatted as a 10-digit Unix timestamp.
      */
     logPublicIp?: pulumi.Input<boolean>;
     /**
-     * 分区的最大分裂数，即分区分裂后，所有分区的最大数量。取值范围为 1~256，默认为 256。仅在开启自动分裂日志分区，即 AutoSplit 为 true 时必选。MaxSplitShard 必须大于指定的 ShardCount，否则日志服务无法自动分裂分区。
+     * Maximum partition split count, which is the maximum number of partitions after splitting. Value range: 1–256, default is 256. Required only when automatic log partition splitting is enabled (AutoSplit is true). MaxSplitShard must be greater than the specified ShardCount; otherwise, the log service cannot automatically split partitions.
      */
     maxSplitShard?: pulumi.Input<number>;
     /**
-     * 日志主题所属的日志项目 ID。
+     * Log project ID to which the log topic belongs.
      */
     projectId?: pulumi.Input<string>;
     /**
-     * 日志分区的数量，默认创建 1 个分区，取值范围为 1～10。 每个分区提供的写入能力为 5MiB/s、500 次/s，读取能力为 20 MiB/s、100 次/s。请在创建日志主题时合理规划分区，创建后暂不支持修改分区数量。
+     * Number of log partitions. By default, 1 partition is created; value range: 1–10. Each partition provides write capacity of 5 MiB/s, 500 ops/s, and read capacity of 20 MiB/s, 100 ops/s. Plan partitions appropriately when creating a log topic; partition count cannot be modified after creation.
      */
     shardCount?: pulumi.Input<number>;
     tags?: pulumi.Input<pulumi.Input<inputs.tls.TopicTag>[]>;
     /**
-     * 时间格式
+     * Time format
      */
     timeFormat?: pulumi.Input<string>;
     /**
-     * 时间字段名
+     * Time field name
      */
     timeKey?: pulumi.Input<string>;
     /**
-     * 日志主题 ID。
+     * Log topic ID.
      */
     topicId?: pulumi.Input<string>;
     /**
-     * 日志主题名称。
+     * Log topic name.
      */
     topicName?: pulumi.Input<string>;
     /**
-     * 日志在日志服务中的总保存时间，超过指定的日志存储时长后，此日志主题中的过期日志会被自动清除。单位为天，默认为 30 天。取值范围为 1～3650，指定为 3650 天表示永久存储。
+     * Total log retention time in the log service. After the specified log storage duration is exceeded, expired logs in this log topic will be automatically cleared. Unit: days. Default is 30 days. Value range is 1–3650. Setting to 3650 days means permanent storage.
      */
     ttl?: pulumi.Input<number>;
     /**
-     * 日志主题修改时间。
+     * Log topic modification time.
      */
     updatedTime?: pulumi.Input<string>;
 }
@@ -236,68 +236,68 @@ export interface TopicState {
  */
 export interface TopicArgs {
     /**
-     * 指定日志主题是否已开启了 Kafka 协议消费功能。true：已开启。false：未开启。
+     * Indicates whether Kafka protocol consumption is enabled for the log topic. true: enabled. false: not enabled.
      */
     allowConsume?: pulumi.Input<boolean>;
     /**
-     * 归档存储时长。该时长取值范围为 60~3650。满足如下任一条件时，可实现归档存储。标准存储时长 30 天及以上。标准存储时长 7 天及以上且低频存储时长 30 天及以上。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Archive storage duration. The value range is 60~3650. Archive storage can be enabled if any of the following conditions are met: Standard storage duration is 30 days or longer; standard storage duration is 7 days or longer and infrequent storage duration is 30 days or longer. This parameter is only effective when EnableHotTtl is set to true.
      */
     archiveTtl?: pulumi.Input<number>;
     /**
-     * 是否开启分区的自动分裂功能。true：当写入的数据量连续 5 分钟超过已有分区服务能力时，日志服务会根据数据量自动分裂分区以满足业务需求，但分裂后的分区数量不可超出最大分裂数。最近 15 分钟内分裂出来的新分区不会自动分裂。false：不开启分区的自动分裂。
+     * Enable automatic partition splitting. true: If the amount of data written exceeds the capacity of existing partitions for 5 consecutive minutes, the log service will automatically split partitions based on data volume to meet business needs, but the number of partitions after splitting cannot exceed the maximum split limit. New partitions created within the last 15 minutes will not be automatically split. false: Disable automatic partition splitting.
      */
     autoSplit?: pulumi.Input<boolean>;
     /**
-     * 低频存储时长。该时长取值范围为 30~3650。标准存储时长 7 天及以上可实现低频存储。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Low-frequency storage duration. Value range: 30–3650. Low-frequency storage is available when standard storage duration is 7 days or longer. This parameter is effective only when EnableHotTtl is true.
      */
     coldTtl?: pulumi.Input<number>;
     /**
-     * 日志主题描述信息。不支持 <>、'、\、\、所有 emoji 表情符号。长度为 0~64 个字符。
+     * Log topic description. Does not support <>, ', \, \, or any emoji symbols. Length: 0–64 characters.
      */
     description?: pulumi.Input<string>;
     /**
-     * 是否开启分层存储。开启后，日志服务支持标准存储、低频存储和归档存储。设置 HotTtl、ArchiveTtl、ColdTtl 后，如果数据存储时间超过对应时长，那么数据会自动沉降至低频存储、归档存储进行后续保存，直到日志采集到服务端的总时长达到 Ttl 时，被后端服务自动清理。
+     * Enable tiered storage. When enabled, the log service supports standard storage, low-frequency storage, and archive storage. After setting HotTtl, ArchiveTtl, and ColdTtl, if data storage duration exceeds the corresponding value, data will automatically move to low-frequency or archive storage for continued retention until the total log retention duration reaches Ttl, after which backend services will automatically clean up the data.
      */
     enableHotTtl?: pulumi.Input<boolean>;
     /**
-     * 是否开启 WebTracking 功能，开启后，可以通过 WebTracking 快速采集前端埋点数据。true：开启 WebTracking功能。false：（默认）关闭 WebTracking 功能。为日志主题开启 Web Tracking 后，通过 API 接口 WebTracks 写入数据时无需经过鉴权，相当于面向公网开放了匿名写入权限，可能产生脏数据。
+     * Enable WebTracking. When enabled, you can quickly collect frontend tracking data using WebTracking. true: Enable WebTracking. false (default): Disable WebTracking. After enabling Web Tracking for the log topic, data written via the WebTracks API does not require authentication, which grants anonymous write access to the public network and may result in dirty data.
      */
     enableTracking?: pulumi.Input<boolean>;
     /**
-     * 标准存储时长。该时长默认为 30 天，取值范围为 7~3650。此参数仅在 EnableHotTtl 为 true 时生效。
+     * Standard storage duration. Default is 30 days; value range: 7–3650. This parameter is effective only when EnableHotTtl is true.
      */
     hotTtl?: pulumi.Input<number>;
     /**
-     * 是否开启记录外网 IP 功能。默认为开启状态。开启后日志服务会自动在日志内容中添加以下元数据字段。**tag****client_ip**：日志来源设备的公网 IP 地址。使用日志服务的私网域名写入日志数据时，则记录私网 IP 地址。**tag****receive_time**：日志达到服务端的时间，格式为 10 位的 Unixtime 时间戳。
+     * Enable external IP recording. Enabled by default. When enabled, the log service automatically adds the following metadata fields to the log content: **tag****client_ip**: Public IP address of the device sending the log. If logs are written using the log service's private domain name, the private IP address is recorded. **tag****receive_time**: Time when the log reaches the server, formatted as a 10-digit Unix timestamp.
      */
     logPublicIp?: pulumi.Input<boolean>;
     /**
-     * 分区的最大分裂数，即分区分裂后，所有分区的最大数量。取值范围为 1~256，默认为 256。仅在开启自动分裂日志分区，即 AutoSplit 为 true 时必选。MaxSplitShard 必须大于指定的 ShardCount，否则日志服务无法自动分裂分区。
+     * Maximum partition split count, which is the maximum number of partitions after splitting. Value range: 1–256, default is 256. Required only when automatic log partition splitting is enabled (AutoSplit is true). MaxSplitShard must be greater than the specified ShardCount; otherwise, the log service cannot automatically split partitions.
      */
     maxSplitShard?: pulumi.Input<number>;
     /**
-     * 日志主题所属的日志项目 ID。
+     * Log project ID to which the log topic belongs.
      */
     projectId: pulumi.Input<string>;
     /**
-     * 日志分区的数量，默认创建 1 个分区，取值范围为 1～10。 每个分区提供的写入能力为 5MiB/s、500 次/s，读取能力为 20 MiB/s、100 次/s。请在创建日志主题时合理规划分区，创建后暂不支持修改分区数量。
+     * Number of log partitions. By default, 1 partition is created; value range: 1–10. Each partition provides write capacity of 5 MiB/s, 500 ops/s, and read capacity of 20 MiB/s, 100 ops/s. Plan partitions appropriately when creating a log topic; partition count cannot be modified after creation.
      */
     shardCount: pulumi.Input<number>;
     tags?: pulumi.Input<pulumi.Input<inputs.tls.TopicTag>[]>;
     /**
-     * 时间格式
+     * Time format
      */
     timeFormat?: pulumi.Input<string>;
     /**
-     * 时间字段名
+     * Time field name
      */
     timeKey?: pulumi.Input<string>;
     /**
-     * 日志主题名称。
+     * Log topic name.
      */
     topicName: pulumi.Input<string>;
     /**
-     * 日志在日志服务中的总保存时间，超过指定的日志存储时长后，此日志主题中的过期日志会被自动清除。单位为天，默认为 30 天。取值范围为 1～3650，指定为 3650 天表示永久存储。
+     * Total log retention time in the log service. After the specified log storage duration is exceeded, expired logs in this log topic will be automatically cleared. Unit: days. Default is 30 days. Value range is 1–3650. Setting to 3650 days means permanent storage.
      */
     ttl?: pulumi.Input<number>;
 }

package/tls/topic.js

@@ -6,7 +6,7 @@ exports.Topic = void 0;
 const pulumi = require("@pulumi/pulumi");
 const utilities = require("../utilities");
 /**
- * 日志主题是日志服务进行日志管理的基本单位，日志接入、检索分析、消费等功能都是基于日志主题的粒度进行操作。
+ * Log topic is the basic unit for log management in the log service. Log ingestion, search and analysis, and consumption are all performed at the log topic level.
  *
  * ## Example Usage
  *

package/transitrouter/getTransitRouter.d.ts

@@ -18,35 +18,35 @@ export interface GetTransitRouterArgs {
  */
 export interface GetTransitRouterResult {
     /**
-     * 中转路由器的ASN号。取值范围为64512 ～ 65534 和 4200000000 ～ 4294967294，默认值为64512。
+     * ASN of the transit router. Value range: 64512–65534 and 4200000000–4294967294. Default value: 64512
      */
     readonly asn: number;
     /**
-     * 网络实例连接的详细信息。
+     * Detailed information of the network instance connection
      */
     readonly attachments: outputs.transitrouter.GetTransitRouterAttachment[];
     /**
-     * 网络实例连接的业务状态。取值如下：Normal：正常。FinancialLocked：已冻结。
+     * Business status of the network instance connection. Values: Normal: Normal. FinancialLocked: Financially locked.
      */
     readonly businessStatus: string;
     /**
-     * 网络实例连接的创建时间。
+     * Creation time of the network instance connection.
      */
     readonly creationTime: string;
     /**
-     * 网络实例连接的删除时间。
+     * Deletion time of the network instance connection.
      */
     readonly deletedTime: string;
     /**
-     * 中转路由器实例的描述信息。必须以字母、数字或中文开头，可包含字母、数字、中文和以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ~ 255个字符。不传入该参数或该参数不传入数值时，默认为空字符串。
+     * Description of the transit router instance. Must start with a letter, number, or Chinese character. Can contain letters, numbers, Chinese characters, and the following special characters: comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), Chinese period (。). Length limit: 0–255 characters. If this parameter is not provided or no value is entered, the default is an empty string
      */
     readonly description: string;
     /**
-     * 中转路由器实例的共享方式。rs：通过平台资源共享功能共享。tr：通过中转路由器实例共享功能共享。
+     * Sharing method of the transit router instance. rs: Shared via platform resource sharing. tr: Shared via transit router instance sharing
      */
     readonly grantSourceType: string;
     /**
-     * 实例共享的状态。Accepted：已接受。Initial：待接受。
+     * Instance sharing status. Accepted: Received. Initial: Pending acceptance.
      */
     readonly grantStatus: string;
     /**
@@ -54,35 +54,35 @@ export interface GetTransitRouterResult {
      */
     readonly id: string;
     /**
-     * 中转路由器是否开启组播。true：开启。false（默认值）：不开启
+     * Whether multicast is enabled for the transit router. true: enabled. false (default): not enabled
      */
     readonly multicastEnabled: boolean;
     /**
-     * 中转路由器实例的欠费关停时间。
+     * Shutdown time due to overdue payment for the transit router instance
      */
     readonly overdueTime: string;
     /**
-     * 中转路由器实例所属项目的名称。不传入该参数或该参数不传入数值时，默认为default。
+     * Name of the project to which the transit router instance belongs. If this parameter is not provided or no value is entered, the default is 'default'
      */
     readonly projectName: string;
     /**
-     * 中转路由器实例的状态。Creating: 创建中。Deleting: 删除中。Pending：配置中。Available：可用。
+     * Status of the transit router instance. Creating: creating. Deleting: deleting. Pending: configuring. Available: available
      */
     readonly status: string;
     /**
-     * 标签列表
+     * Tag list
      */
     readonly tags: outputs.transitrouter.GetTransitRouterTag[];
     /**
-     * 中转路由器实例的ID。
+     * Transit router instance ID.
      */
     readonly transitRouterId: string;
     /**
-     * 中转路由器实例的名称。必须以字母、数字或中文开头，可包含字母、数字、中文和以下特殊字符：点号（.）、下划线（_）和短横线（-）。长度限制为1 ~ 128个字符。不传入该参数或该参数不传入数值时，默认为中转路由器实例的ID。
+     * Name of the transit router instance. Must start with a letter, number, or Chinese character. Can include letters, numbers, Chinese characters, and the following special characters: period (.), underscore (_), and hyphen (-). Length limit: 1–128 characters. If this parameter is not provided or no value is specified, the default is the transit router instance ID.
      */
     readonly transitRouterName: string;
     /**
-     * 中转路由器实例的最近操作时间。
+     * Last operation time of the transit router instance
      */
     readonly updateTime: string;
 }

package/transitrouter/getTransitRouterRouteEntry.d.ts

@@ -17,19 +17,19 @@ export interface GetTransitRouterRouteEntryArgs {
  */
 export interface GetTransitRouterRouteEntryResult {
     /**
-     * 路由条目的AS路径。
+     * AS path of the route entry
      */
     readonly asPaths: string[];
     /**
-     * 路由条目的创建时间。
+     * Creation time of the route entry
      */
     readonly createdTime: string;
     /**
-     * TR路由表路由条目的描述信息。必须以字母、数字或中文开头，可包含字母、数字、中文和以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ~ 255个字符。不传入该参数或该参数不传入数值时，默认为空字符串。
+     * Description of the TR route table entry. Must start with a letter, number, or Chinese character. Can include letters, numbers, Chinese characters, and the following special characters: comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), and Chinese period (。). Length must be between 0 and 255 characters. If this parameter is not provided or no value is specified, the default is an empty string
      */
     readonly description: string;
     /**
-     * 路由条目的目标网段。
+     * Destination CIDR block of the route entry
      */
     readonly destinationCidrBlock: string;
     /**
@@ -37,43 +37,43 @@ export interface GetTransitRouterRouteEntryResult {
      */
     readonly id: string;
     /**
-     * 路由条目的状态。Available：可用。Creating：创建中。Pending：配置中。Deleting：删除中。Conflicted：未生效。
+     * Status of the route entry. Available: Available. Creating: Creating. Pending: Configuring. Deleting: Deleting. Conflicted: Inactive
      */
     readonly status: string;
     /**
-     * TR路由条目的ID。
+     * ID of the TR route entry
      */
     readonly transitRouterRouteEntryId: string;
     /**
-     * 路由条目的名称。
+     * Name of the route entry
      */
     readonly transitRouterRouteEntryName: string;
     /**
-     * 路由条目的下一跳ID。
+     * Next hop ID of the route entry
      */
     readonly transitRouterRouteEntryNextHopId: string;
     /**
-     * 路由条目下一跳网络实例ID。
+     * Next hop network instance ID of the route entry
      */
     readonly transitRouterRouteEntryNextHopResourceId: string;
     /**
-     * 路由条目下一跳网络实例的类型。VPC：私有网络。VPN：VPN连接。DirectConnectGateway：专线网关。TransitRouter：中转路由器。
+     * Type of the next hop network instance for the route entry. VPC: Virtual Private Cloud. VPN: VPN connection. DirectConnectGateway: Direct Connect Gateway. TransitRouter: Transit Router
      */
     readonly transitRouterRouteEntryNextHopResourceType: string;
     /**
-     * 路由条目的下一跳类型。取值如下：Attachment：网络实例，表示匹配该路由条目的流量会被转发到指定的网络实例。BlackHole：黑洞，表示匹配该路由条目的流量会被丢弃。
+     * Next hop type of the route entry. Valid values: Attachment: Network instance. Traffic matching this route entry will be forwarded to the specified network instance. BlackHole: Black hole. Traffic matching this route entry will be dropped
      */
     readonly transitRouterRouteEntryNextHopType: string;
     /**
-     * 路由条目的类型。Static：静态路由。Propagated：自动学习路由。
+     * Type of the route entry. Static: Static route. Propagated: Learned route
      */
     readonly transitRouterRouteEntryType: string;
     /**
-     * 中转路由器实例关联的路由表的ID。
+     * ID of the route table associated with the transit router instance
      */
     readonly transitRouterRouteTableId: string;
     /**
-     * 路由条目的更新时间。
+     * Last updated time of the route entry
      */
     readonly updatedTime: string;
 }

package/transitrouter/getTransitRouterRouteTable.d.ts

@@ -18,11 +18,11 @@ export interface GetTransitRouterRouteTableArgs {
  */
 export interface GetTransitRouterRouteTableResult {
     /**
-     * TR路由表的创建时间
+     * Creation time of the TR routing table
      */
     readonly createdTime: string;
     /**
-     * TR路由表的描述信息。必须以字母、数字或中文开头，可包含字母、数字、中文和以下特殊字符：英文逗号（,）、点号（.）、下划线（_）、空格（ ）、等号（=）、短横线（-）、中文逗号（，）、中文句号（。）。长度限制为0 ~ 255个字符。不传入该参数或该参数不传入数值时，默认为空字符串。
+     * Description of the TR routing table. Must start with a letter, number, or Chinese character, and can include letters, numbers, Chinese characters, and the following special characters: comma (,), period (.), underscore (_), space ( ), equals sign (=), hyphen (-), Chinese comma (，), and Chinese period (。). Length limit: 0–255 characters. If this parameter is not provided or no value is specified, the default is an empty string.
      */
     readonly description: string;
     /**
@@ -30,39 +30,39 @@ export interface GetTransitRouterRouteTableResult {
      */
     readonly id: string;
     /**
-     * TR路由表关联的收方向路由策略的ID
+     * ID of the inbound routing policy associated with the TR routing table
      */
     readonly inRoutePolicyTableId: string;
     /**
-     * TR路由表关联的发方向路由策略的ID
+     * ID of the outbound routing policy associated with the TR routing table
      */
     readonly outRoutePolicyTableId: string;
     /**
-     * TR路由表的状态。Creating: 创建中。Deleting: 删除中。Pending：配置中。Available：可用
+     * Status of the TR routing table. Creating: creating. Deleting: deleting. Pending: configuring. Available: available
      */
     readonly status: string;
     /**
-     * TR路由表的标签信息。
+     * Tag information for the TR routing table
      */
     readonly tags: outputs.transitrouter.GetTransitRouterRouteTableTag[];
     /**
-     * 中转路由器实例的ID
+     * Transit Router instance ID
      */
     readonly transitRouterId: string;
     /**
-     * TR路由表的ID
+     * TR routing table ID
      */
     readonly transitRouterRouteTableId: string;
     /**
-     * TR路由表的名称。必须以字母、数字或中文开头，可包含字母、数字、中文及以下特殊字符：点号（.）、下划线（_）和短横线（-）。长度限制为1 ~ 128个字符。不传入该参数或该参数不传入数值时，默认为TR路由表的ID
+     * Name of the TR routing table. Must start with a letter, number, or Chinese character, and can include letters, numbers, Chinese characters, and the following special characters: period (.), underscore (_), and hyphen (-). Length limit: 1–128 characters. If this parameter is not provided or no value is specified, the default is the TR routing table ID
      */
     readonly transitRouterRouteTableName: string;
     /**
-     * TR路由表的类型。System：系统路由表。Custom：自定义路由表。
+     * Type of TR routing table. System: system routing table. Custom: custom routing table.
      */
     readonly transitRouterRouteTableType: string;
     /**
-     * TR路由表的最近操作时间
+     * Last operation time of the TR routing table
      */
     readonly updatedTime: string;
 }