@aws-sdk/client-config-service 3.293.0 → 3.294.0

package/dist-types/commands/GetAggregateDiscoveredResourceCountsCommand.d.ts

@@ -15,7 +15,7 @@ export interface GetAggregateDiscoveredResourceCountsCommandOutput extends GetAg
 }
 /**
  * <p>Returns the resource counts across accounts and regions that are present in your Config aggregator. You can request the resource counts by providing filters and GroupByKey.</p>
- * 		       <p>For example, if the input contains accountID 12345678910 and region us-east-1 in filters, the API returns the count of resources in account ID 12345678910 and region us-east-1.
+ *          <p>For example, if the input contains accountID 12345678910 and region us-east-1 in filters, the API returns the count of resources in account ID 12345678910 and region us-east-1.
  * 			If the input contains ACCOUNT_ID as a GroupByKey, the API returns resource counts for all source accounts that are present in your aggregator.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -35,7 +35,7 @@ export interface GetAggregateDiscoveredResourceCountsCommandOutput extends GetAg
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -43,9 +43,9 @@ export interface GetAggregateDiscoveredResourceCountsCommandOutput extends GetAg
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetAggregateResourceConfigCommand.d.ts

@@ -40,9 +40,9 @@ export interface GetAggregateResourceConfigCommandOutput extends GetAggregateRes
  * 			been discovered.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetComplianceDetailsByConfigRuleCommand.d.ts

@@ -33,16 +33,16 @@ export interface GetComplianceDetailsByConfigRuleCommandOutput extends GetCompli
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  *
  */

package/dist-types/commands/GetComplianceDetailsByResourceCommand.d.ts

@@ -33,7 +33,7 @@ export interface GetComplianceDetailsByResourceCommandOutput extends GetComplian
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/GetComplianceSummaryByResourceTypeCommand.d.ts

@@ -33,7 +33,7 @@ export interface GetComplianceSummaryByResourceTypeCommandOutput extends GetComp
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/GetConformancePackComplianceDetailsCommand.d.ts

@@ -33,12 +33,12 @@ export interface GetConformancePackComplianceDetailsCommandOutput extends GetCon
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigRuleInConformancePackException} (client fault)

package/dist-types/commands/GetConformancePackComplianceSummaryCommand.d.ts

@@ -33,7 +33,7 @@ export interface GetConformancePackComplianceSummaryCommandOutput extends GetCon
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *

package/dist-types/commands/GetCustomRulePolicyCommand.d.ts

@@ -30,7 +30,7 @@ export interface GetCustomRulePolicyCommandOutput extends GetCustomRulePolicyRes
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  *
  */

package/dist-types/commands/GetDiscoveredResourceCountsCommand.d.ts

@@ -17,67 +17,61 @@ export interface GetDiscoveredResourceCountsCommandOutput extends GetDiscoveredR
  * <p>Returns the resource types, the number of each resource type,
  * 			and the total number of resources that Config is recording in
  * 			this region for your Amazon Web Services account. </p>
- * 		       <p class="title">
+ *          <p class="title">
  *             <b>Example</b>
  *          </p>
  *          <ol>
  *             <li>
- * 				           <p>Config is recording three resource types in the US
+ *                <p>Config is recording three resource types in the US
  * 					East (Ohio) Region for your account: 25 EC2 instances, 20
  * 					IAM users, and 15 S3 buckets.</p>
- * 			         </li>
+ *             </li>
  *             <li>
- * 				           <p>You make a call to the
+ *                <p>You make a call to the
  * 						<code>GetDiscoveredResourceCounts</code> action and
  * 					specify that you want all resource types. </p>
- * 			         </li>
+ *             </li>
  *             <li>
- * 				           <p>Config returns the following:</p>
- *
- * 				           <ul>
+ *                <p>Config returns the following:</p>
+ *                <ul>
  *                   <li>
- * 						               <p>The resource types (EC2 instances, IAM users,
+ *                      <p>The resource types (EC2 instances, IAM users,
  * 							and S3 buckets).</p>
- * 					             </li>
+ *                   </li>
  *                   <li>
- * 						               <p>The number of each resource type (25, 20, and
+ *                      <p>The number of each resource type (25, 20, and
  * 							15).</p>
- * 					             </li>
+ *                   </li>
  *                   <li>
- * 						               <p>The total number of all resources
+ *                      <p>The total number of all resources
  * 							(60).</p>
- * 					             </li>
+ *                   </li>
  *                </ul>
- *
- * 			         </li>
+ *             </li>
  *          </ol>
- *
- * 		       <p>The response is paginated. By default, Config lists 100
+ *          <p>The response is paginated. By default, Config lists 100
  * 				<a>ResourceCount</a> objects on each page. You can
  * 			customize this number with the <code>limit</code> parameter. The
  * 			response includes a <code>nextToken</code> string. To get the next
  * 			page of results, run the request again and specify the string for
  * 			the <code>nextToken</code> parameter.</p>
- *
- * 		       <note>
- * 			         <p>If you make a call to the <a>GetDiscoveredResourceCounts</a> action, you might
+ *          <note>
+ *             <p>If you make a call to the <a>GetDiscoveredResourceCounts</a> action, you might
  * 				not immediately receive resource counts in the following
  * 				situations:</p>
- *
- * 			         <ul>
+ *             <ul>
  *                <li>
- * 					             <p>You are a new Config customer.</p>
- * 				           </li>
+ *                   <p>You are a new Config customer.</p>
+ *                </li>
  *                <li>
- * 					             <p>You just enabled resource recording.</p>
- * 				           </li>
+ *                   <p>You just enabled resource recording.</p>
+ *                </li>
  *             </ul>
- *
- * 			         <p>It might take a few minutes for Config to record and
+ *             <p>It might take a few minutes for Config to record and
  * 				count your resources. Wait a few minutes and then retry the
  * 					<a>GetDiscoveredResourceCounts</a> action.
  * 			</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -96,14 +90,14 @@ export interface GetDiscoveredResourceCountsCommandOutput extends GetDiscoveredR
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetOrganizationConfigRuleDetailedStatusCommand.d.ts

@@ -33,16 +33,16 @@ export interface GetOrganizationConfigRuleDetailedStatusCommandOutput extends Ge
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an organization Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an organization Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -59,7 +59,7 @@ export interface GetOrganizationConfigRuleDetailedStatusCommandOutput extends Ge
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/GetOrganizationConformancePackDetailedStatusCommand.d.ts

@@ -33,17 +33,17 @@ export interface GetOrganizationConformancePackDetailedStatusCommandOutput exten
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConformancePackException} (client fault)
  *  <p>Config organization conformance pack that you passed in the filter does not exist.</p>
- * 		       <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
+ *          <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -60,7 +60,7 @@ export interface GetOrganizationConformancePackDetailedStatusCommandOutput exten
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/GetOrganizationCustomRulePolicyCommand.d.ts

@@ -30,11 +30,11 @@ export interface GetOrganizationCustomRulePolicyCommandOutput extends GetOrganiz
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link NoSuchOrganizationConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an organization Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an organization Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -51,7 +51,7 @@ export interface GetOrganizationCustomRulePolicyCommandOutput extends GetOrganiz
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/GetResourceConfigHistoryCommand.d.ts

@@ -21,19 +21,19 @@ export interface GetResourceConfigHistoryCommandOutput extends GetResourceConfig
  * 			minimum of 30 days and a maximum of 7 years (2557 days), Config
  * 			returns the <code>ConfigurationItems</code> for the specified
  * 			retention period. </p>
- * 		       <p>The response is paginated. By default, Config returns a
+ *          <p>The response is paginated. By default, Config returns a
  * 			limit of 10 configuration items per page. You can customize this
  * 			number with the <code>limit</code> parameter. The response includes
  * 			a <code>nextToken</code> string. To get the next page of results,
  * 			run the request again and specify the string for the
  * 				<code>nextToken</code> parameter.</p>
- * 		       <note>
- * 			         <p>Each call to the API is limited to span a duration of seven
+ *          <note>
+ *             <p>Each call to the API is limited to span a duration of seven
  * 				days. It is likely that the number of records returned is
  * 				smaller than the specified <code>limit</code>. In such cases,
  * 				you can make another call, using the
  * 				<code>nextToken</code>.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -52,12 +52,12 @@ export interface GetResourceConfigHistoryCommandOutput extends GetResourceConfig
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidTimeRangeException} (client fault)
- *  <p>The specified time range is invalid. The earlier time is not
+ *  <p>The specified time range is not valid. The earlier time is not
  * 			chronologically before the later time.</p>
  *
  * @throws {@link NoAvailableConfigurationRecorderException} (client fault)
@@ -70,9 +70,9 @@ export interface GetResourceConfigHistoryCommandOutput extends GetResourceConfig
  * 			been discovered.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetResourceEvaluationSummaryCommand.d.ts

@@ -17,6 +17,10 @@ export interface GetResourceEvaluationSummaryCommandOutput extends GetResourceEv
  * <p>Returns a summary of resource evaluation for the specified resource evaluation ID from the proactive rules that were run.
  * 			The results indicate which evaluation context was used to evaluate the rules, which resource details were evaluated,
  * 			the evaluation mode that was run, and whether the resource details comply with the configuration of the proactive rules. </p>
+ *          <note>
+ *             <p>To see additional information about the evaluation result, such as which rule flagged a resource as NON_COMPLIANT, use the <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_GetComplianceDetailsByResource.html">GetComplianceDetailsByResource</a> API.
+ * 			For more information, see the  <a href="https://docs.aws.amazon.com/config/latest/APIReference/API_GetResourceEvaluationSummary.html#API_GetResourceEvaluationSummary_Examples">Examples</a> section.</p>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/GetStoredQueryCommand.d.ts

@@ -33,9 +33,9 @@ export interface GetStoredQueryCommandOutput extends GetStoredQueryResponse, __M
  *  <p>You have specified a resource that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/ListAggregateDiscoveredResourcesCommand.d.ts

@@ -17,7 +17,7 @@ export interface ListAggregateDiscoveredResourcesCommandOutput extends ListAggre
  * <p>Accepts a resource type and returns a list of resource identifiers that are aggregated for a specific resource type across accounts and regions.
  * 			A resource identifier includes the resource type, ID, (if available) the custom resource name, source account, and source region.
  * 			You can narrow the results to include only resources that have specific resource IDs, or a resource name, or source account ID, or source region.</p>
- * 			      <p>For example, if the input consists of accountID 12345678910 and the region is us-east-1 for resource type <code>AWS::EC2::Instance</code> then the API returns all the EC2 instance identifiers of accountID 12345678910 and region us-east-1.</p>
+ *          <p>For example, if the input consists of accountID 12345678910 and the region is us-east-1 for resource type <code>AWS::EC2::Instance</code> then the API returns all the EC2 instance identifiers of accountID 12345678910 and region us-east-1.</p>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -36,7 +36,7 @@ export interface ListAggregateDiscoveredResourcesCommandOutput extends ListAggre
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -44,9 +44,9 @@ export interface ListAggregateDiscoveredResourcesCommandOutput extends ListAggre
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/ListConformancePackComplianceScoresCommand.d.ts

@@ -18,7 +18,7 @@ export interface ListConformancePackComplianceScoresCommandOutput extends ListCo
  * 			A compliance score is the percentage of the number of compliant rule-resource combinations in a conformance pack compared to the number of total possible rule-resource combinations in the conformance pack.
  * 			This metric provides you with a high-level view of the compliance state of your conformance packs. You can use it to identify, investigate, and understand
  * 			the level of compliance in your conformance packs.</p>
- * 		       <note>
+ *          <note>
  *             <p>Conformance packs with no evaluation results will have a compliance score of <code>INSUFFICIENT_DATA</code>.</p>
  *          </note>
  * @example
@@ -39,12 +39,12 @@ export interface ListConformancePackComplianceScoresCommandOutput extends ListCo
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/ListDiscoveredResourcesCommand.d.ts

@@ -21,11 +21,11 @@ export interface ListDiscoveredResourcesCommandOutput extends ListDiscoveredReso
  * 			discovered, including those that Config is not currently
  * 			recording. You can narrow the results to include only resources that
  * 			have specific resource IDs or a resource name.</p>
- * 		       <note>
- * 			         <p>You can specify either resource IDs or a resource name, but
+ *          <note>
+ *             <p>You can specify either resource IDs or a resource name, but
  * 				not both, in the same request.</p>
- * 		       </note>
- * 		       <p>The response is paginated. By default, Config lists 100
+ *          </note>
+ *          <p>The response is paginated. By default, Config lists 100
  * 			resource identifiers on each page. You can customize this number
  * 			with the <code>limit</code> parameter. The response includes a
  * 				<code>nextToken</code> string. To get the next page of results,
@@ -49,7 +49,7 @@ export interface ListDiscoveredResourcesCommandOutput extends ListDiscoveredReso
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -59,9 +59,9 @@ export interface ListDiscoveredResourcesCommandOutput extends ListDiscoveredReso
  * 			recorder.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/ListResourceEvaluationsCommand.d.ts

@@ -30,16 +30,16 @@ export interface ListResourceEvaluationsCommandOutput extends ListResourceEvalua
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link InvalidTimeRangeException} (client fault)
- *  <p>The specified time range is invalid. The earlier time is not
+ *  <p>The specified time range is not valid. The earlier time is not
  * 			chronologically before the later time.</p>
  *
  *

package/dist-types/commands/ListStoredQueriesCommand.d.ts

@@ -30,14 +30,14 @@ export interface ListStoredQueriesCommandOutput extends ListStoredQueriesRespons
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/ListTagsForResourceCommand.d.ts

@@ -33,7 +33,7 @@ export interface ListTagsForResourceCommandOutput extends ListTagsForResourceRes
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -41,9 +41,9 @@ export interface ListTagsForResourceCommandOutput extends ListTagsForResourceRes
  *  <p>You have specified a resource that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/PutAggregationAuthorizationCommand.d.ts

@@ -16,6 +16,11 @@ export interface PutAggregationAuthorizationCommandOutput extends PutAggregation
 /**
  * <p>Authorizes the aggregator account and region to collect data
  * 			from the source account and region. </p>
+ *          <note>
+ *             <p>
+ *                <code>PutAggregationAuthorization</code> is an idempotent API. Subsequent requests won’t create a duplicate resource if one was already created. If a following request has different <code>tags</code> values,
+ * 			Config will ignore these differences and treat it as an idempotent request of the previous. In this case, <code>tags</code> will not be updated, even if they are different.</p>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -31,7 +36,7 @@ export interface PutAggregationAuthorizationCommandOutput extends PutAggregation
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *