@aws-sdk/client-config-service 3.293.0 → 3.294.0

package/dist-types/commands/DescribeConfigRulesCommand.d.ts

@@ -30,16 +30,16 @@ export interface DescribeConfigRulesCommandOutput extends DescribeConfigRulesRes
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  *
  */

package/dist-types/commands/DescribeConfigurationAggregatorSourcesStatusCommand.d.ts

@@ -34,12 +34,12 @@ export interface DescribeConfigurationAggregatorSourcesStatusCommandOutput exten
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigurationAggregatorException} (client fault)

package/dist-types/commands/DescribeConfigurationAggregatorsCommand.d.ts

@@ -36,12 +36,12 @@ export interface DescribeConfigurationAggregatorsCommandOutput extends DescribeC
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigurationAggregatorException} (client fault)

package/dist-types/commands/DescribeConfigurationRecorderStatusCommand.d.ts

@@ -15,13 +15,13 @@ export interface DescribeConfigurationRecorderStatusCommandOutput extends Descri
 }
 /**
  * <p>Returns the current status of the specified configuration
- * 			recorder. If a configuration recorder is not specified, this action
+ * 			recorder as well as the status of the last recording event for the recorder. If a configuration recorder is not specified, this action
  * 			returns the status of all configuration recorders associated with
  * 			the account.</p>
- * 		       <note>
- * 			         <p>Currently, you can specify only one configuration recorder
- * 				per region in your account.</p>
- * 		       </note>
+ *          <note>
+ *             <p>Currently, you can specify only one configuration recorder
+ * 				per region in your account. For a detailed status of recording events over time, add your Config events to Amazon CloudWatch metrics and use CloudWatch metrics.</p>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeConfigurationRecordersCommand.d.ts

@@ -18,10 +18,10 @@ export interface DescribeConfigurationRecordersCommandOutput extends DescribeCon
  * 			If the configuration recorder is not specified, this action returns
  * 			the details for all configuration recorders associated with the
  * 			account.</p>
- * 		       <note>
- * 			         <p>Currently, you can specify only one configuration recorder
+ *          <note>
+ *             <p>Currently, you can specify only one configuration recorder
  * 				per region in your account.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeConformancePackComplianceCommand.d.ts

@@ -15,7 +15,7 @@ export interface DescribeConformancePackComplianceCommandOutput extends Describe
 }
 /**
  * <p>Returns compliance details for each rule in that conformance pack.</p>
- * 		       <note>
+ *          <note>
  *             <p>You must provide exact rule names.</p>
  *          </note>
  * @example
@@ -36,12 +36,12 @@ export interface DescribeConformancePackComplianceCommandOutput extends Describe
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConfigRuleInConformancePackException} (client fault)

package/dist-types/commands/DescribeConformancePackStatusCommand.d.ts

@@ -15,7 +15,7 @@ export interface DescribeConformancePackStatusCommandOutput extends DescribeConf
 }
 /**
  * <p>Provides one or more conformance packs deployment status.</p>
- * 		       <note>
+ *          <note>
  *             <p>If there are no conformance packs then you will see an empty result.</p>
  *          </note>
  * @example
@@ -36,12 +36,12 @@ export interface DescribeConformancePackStatusCommandOutput extends DescribeConf
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DescribeConformancePacksCommand.d.ts

@@ -33,12 +33,12 @@ export interface DescribeConformancePacksCommandOutput extends DescribeConforman
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchConformancePackException} (client fault)

package/dist-types/commands/DescribeDeliveryChannelStatusCommand.d.ts

@@ -18,10 +18,10 @@ export interface DescribeDeliveryChannelStatusCommandOutput extends DescribeDeli
  * 			If a delivery channel is not specified, this action returns the
  * 			current status of all delivery channels associated with the
  * 			account.</p>
- * 		       <note>
- * 			         <p>Currently, you can specify only one delivery channel per
+ *          <note>
+ *             <p>Currently, you can specify only one delivery channel per
  * 				region in your account.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeDeliveryChannelsCommand.d.ts

@@ -17,10 +17,10 @@ export interface DescribeDeliveryChannelsCommandOutput extends DescribeDeliveryC
  * <p>Returns details about the specified delivery channel. If a
  * 			delivery channel is not specified, this action returns the details
  * 			of all delivery channels associated with the account.</p>
- * 		       <note>
- * 			         <p>Currently, you can specify only one delivery channel per
+ *          <note>
+ *             <p>Currently, you can specify only one delivery channel per
  * 				region in your account.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript

package/dist-types/commands/DescribeOrganizationConfigRuleStatusesCommand.d.ts

@@ -15,14 +15,13 @@ export interface DescribeOrganizationConfigRuleStatusesCommandOutput extends Des
 }
 /**
  * <p>Provides organization Config rule deployment status for an organization.</p>
- *
- * 		       <note>
+ *          <note>
  *             <p>The status is not considered successful until organization Config rule is successfully deployed in all the member
  * 			accounts with an exception of excluded accounts.</p>
- * 			         <p>When you specify the limit and the next token, you receive a paginated response.
+ *             <p>When you specify the limit and the next token, you receive a paginated response.
  * 			Limit and next token are not applicable if you specify organization Config rule names.
  * 			It is only applicable, when you request all the organization Config rules.</p>
- * 			      </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -41,16 +40,16 @@ export interface DescribeOrganizationConfigRuleStatusesCommandOutput extends Des
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an organization Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an organization Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -67,7 +66,7 @@ export interface DescribeOrganizationConfigRuleStatusesCommandOutput extends Des
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/DescribeOrganizationConfigRulesCommand.d.ts

@@ -15,17 +15,14 @@ export interface DescribeOrganizationConfigRulesCommandOutput extends DescribeOr
 }
 /**
  * <p>Returns a list of organization Config rules. </p>
- *
- * 		       <note>
+ *          <note>
  *             <p>When you specify the limit and the next token, you receive a paginated response.</p>
- * 			         <p>Limit and next token are not applicable if you specify organization Config rule names.
+ *             <p>Limit and next token are not applicable if you specify organization Config rule names.
  * 			It is only applicable, when you request all the organization Config rules.</p>
- *
- * 			         <p>
+ *             <p>
  *                <i>For accounts within an organzation</i>
  *             </p>
- *
- * 			         <p>If you deploy an organizational rule or conformance pack in an organization
+ *             <p>If you deploy an organizational rule or conformance pack in an organization
  * 				administrator account, and then establish a delegated administrator and deploy an
  * 				organizational rule or conformance pack in the delegated administrator account, you
  * 				won't be able to see the organizational rule or conformance pack in the organization
@@ -35,7 +32,7 @@ export interface DescribeOrganizationConfigRulesCommandOutput extends DescribeOr
  * 				<code>DescribeOrganizationConformancePacks</code> APIs can only see and interact with
  * 				the organization-related resource that were deployed from within the account calling
  * 				those APIs.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -54,16 +51,16 @@ export interface DescribeOrganizationConfigRulesCommandOutput extends DescribeOr
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConfigRuleException} (client fault)
- *  <p>The Config rule in the request is invalid. Verify that the rule is an organization Config Custom Policy rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
+ *  <p>The Config rule in the request is not valid. Verify that the rule is an organization Config Process Check rule, that the rule name is correct, and that valid Amazon Resouce Names (ARNs) are used before trying again.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -80,7 +77,7 @@ export interface DescribeOrganizationConfigRulesCommandOutput extends DescribeOr
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/DescribeOrganizationConformancePackStatusesCommand.d.ts

@@ -15,10 +15,10 @@ export interface DescribeOrganizationConformancePackStatusesCommandOutput extend
 }
 /**
  * <p>Provides organization conformance pack deployment status for an organization. </p>
- * 		       <note>
- * 			         <p>The status is not considered successful until organization conformance pack is successfully
+ *          <note>
+ *             <p>The status is not considered successful until organization conformance pack is successfully
  * 				deployed in all the member accounts with an exception of excluded accounts.</p>
- * 			         <p>When you specify the limit and the next token, you receive a paginated response.
+ *             <p>When you specify the limit and the next token, you receive a paginated response.
  * 				Limit and next token are not applicable if you specify organization conformance pack names.
  * 				They are only applicable, when you request all the organization conformance packs.</p>
  *          </note>
@@ -40,17 +40,17 @@ export interface DescribeOrganizationConformancePackStatusesCommandOutput extend
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConformancePackException} (client fault)
  *  <p>Config organization conformance pack that you passed in the filter does not exist.</p>
- * 		       <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
+ *          <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -67,7 +67,7 @@ export interface DescribeOrganizationConformancePackStatusesCommandOutput extend
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/DescribeOrganizationConformancePacksCommand.d.ts

@@ -15,16 +15,14 @@ export interface DescribeOrganizationConformancePacksCommandOutput extends Descr
 }
 /**
  * <p>Returns a list of organization conformance packs. </p>
- * 		       <note>
+ *          <note>
  *             <p>When you specify the limit and the next token, you receive a paginated response. </p>
- * 			         <p>Limit and next token are not applicable if you specify organization conformance packs names. They are only applicable,
+ *             <p>Limit and next token are not applicable if you specify organization conformance packs names. They are only applicable,
  * 			when you request all the organization conformance packs. </p>
- *
- * 			         <p>
+ *             <p>
  *                <i>For accounts within an organzation</i>
  *             </p>
- *
- * 			         <p>If you deploy an organizational rule or conformance pack in an organization
+ *             <p>If you deploy an organizational rule or conformance pack in an organization
  * 				administrator account, and then establish a delegated administrator and deploy an
  * 				organizational rule or conformance pack in the delegated administrator account, you
  * 				won't be able to see the organizational rule or conformance pack in the organization
@@ -34,7 +32,7 @@ export interface DescribeOrganizationConformancePacksCommandOutput extends Descr
  * 				<code>DescribeOrganizationConformancePacks</code> APIs can only see and interact with
  * 				the organization-related resource that were deployed from within the account calling
  * 				those APIs.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -53,17 +51,17 @@ export interface DescribeOrganizationConformancePacksCommandOutput extends Descr
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link NoSuchOrganizationConformancePackException} (client fault)
  *  <p>Config organization conformance pack that you passed in the filter does not exist.</p>
- * 		       <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
+ *          <p>For DeleteOrganizationConformancePack, you tried to delete an organization conformance pack that does not exist.</p>
  *
  * @throws {@link OrganizationAccessDeniedException} (client fault)
  *  <p>For <code>PutConfigurationAggregator</code> API, you can see this exception for the following reasons:</p>
- * 		       <ul>
+ *          <ul>
  *             <li>
  *                <p>No permission to call <code>EnableAWSServiceAccess</code> API</p>
  *             </li>
@@ -80,7 +78,7 @@ export interface DescribeOrganizationConformancePacksCommandOutput extends Descr
  * 			Ensure that the management account registers delagated administrator for Config service principle name before the delegated administrator creates an aggregator.</p>
  *             </li>
  *          </ul>
- * 		       <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
+ *          <p>For all <code>OrganizationConfigRule</code> and <code>OrganizationConformancePack</code> APIs, Config throws an exception if APIs are called from member accounts. All APIs must be called from organization management account.</p>
  *
  *
  */

package/dist-types/commands/DescribePendingAggregationRequestsCommand.d.ts

@@ -33,12 +33,12 @@ export interface DescribePendingAggregationRequestsCommandOutput extends Describ
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DescribeRemediationExceptionsCommand.d.ts

@@ -16,11 +16,11 @@ export interface DescribeRemediationExceptionsCommandOutput extends DescribeReme
 /**
  * <p>Returns the details of one or more remediation exceptions. A detailed view of a remediation exception for a set of resources that includes an explanation of an exception and the time when the exception will be deleted.
  * 			When you specify the limit and the next token, you receive a paginated response. </p>
- * 		       <note>
+ *          <note>
  *             <p>Config generates a remediation exception when a problem occurs executing a remediation action to a specific resource.
  * 				Remediation exceptions blocks auto-remediation until the exception is cleared.</p>
- * 			         <p>When you specify the limit and the next token, you receive a paginated response. </p>
- * 			         <p>Limit and next token are not applicable if you request resources in batch. It is only applicable, when you request all resources.</p>
+ *             <p>When you specify the limit and the next token, you receive a paginated response. </p>
+ *             <p>Limit and next token are not applicable if you request resources in batch. It is only applicable, when you request all resources.</p>
  *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
@@ -37,12 +37,12 @@ export interface DescribeRemediationExceptionsCommandOutput extends DescribeReme
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  *

package/dist-types/commands/DescribeRemediationExecutionStatusCommand.d.ts

@@ -31,12 +31,12 @@ export interface DescribeRemediationExecutionStatusCommandOutput extends Describ
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchRemediationConfigurationException} (client fault)

package/dist-types/commands/DescribeRetentionConfigurationsCommand.d.ts

@@ -18,10 +18,10 @@ export interface DescribeRetentionConfigurationsCommandOutput extends DescribeRe
  * 			the retention configuration name is not specified, this action
  * 			returns the details for all the retention configurations for that
  * 			account.</p>
- * 		       <note>
- * 			         <p>Currently, Config supports only one retention
+ *          <note>
+ *             <p>Currently, Config supports only one retention
  * 				configuration per region in your account.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -37,12 +37,12 @@ export interface DescribeRetentionConfigurationsCommandOutput extends DescribeRe
  * @see {@link ConfigServiceClientResolvedConfig | config} for ConfigServiceClient's `config` shape.
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
  * @throws {@link InvalidParameterValueException} (client fault)
- *  <p>One or more of the specified parameters are invalid. Verify
+ *  <p>One or more of the specified parameters are not valid. Verify
  * 			that your parameters are valid and try again.</p>
  *
  * @throws {@link NoSuchRetentionConfigurationException} (client fault)

package/dist-types/commands/GetAggregateComplianceDetailsByConfigRuleCommand.d.ts

@@ -18,11 +18,11 @@ export interface GetAggregateComplianceDetailsByConfigRuleCommandOutput extends
  * 			rule for a specific resource in a rule. The results indicate which
  * 			Amazon Web Services resources were evaluated by the rule, when each resource was
  * 			last evaluated, and whether each resource complies with the rule. </p>
- * 		       <note>
- * 			         <p>The results can return an empty result page. But if you
+ *          <note>
+ *             <p>The results can return an empty result page. But if you
  * 				have a <code>nextToken</code>, the results are displayed on the next
  * 				page.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -41,7 +41,7 @@ export interface GetAggregateComplianceDetailsByConfigRuleCommandOutput extends
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -49,9 +49,9 @@ export interface GetAggregateComplianceDetailsByConfigRuleCommandOutput extends
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetAggregateConfigRuleComplianceSummaryCommand.d.ts

@@ -16,11 +16,11 @@ export interface GetAggregateConfigRuleComplianceSummaryCommandOutput extends Ge
 /**
  * <p>Returns the number of compliant and noncompliant rules for one
  * 			or more accounts and regions in an aggregator.</p>
- * 		       <note>
- * 			         <p>The results can return an empty result page, but if you
+ *          <note>
+ *             <p>The results can return an empty result page, but if you
  * 				have a nextToken, the results are displayed on the next
  * 				page.</p>
- * 		       </note>
+ *          </note>
  * @example
  * Use a bare-bones client and the command you need to make an API call.
  * ```javascript
@@ -39,7 +39,7 @@ export interface GetAggregateConfigRuleComplianceSummaryCommandOutput extends Ge
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -47,9 +47,9 @@ export interface GetAggregateConfigRuleComplianceSummaryCommandOutput extends Ge
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */

package/dist-types/commands/GetAggregateConformancePackComplianceSummaryCommand.d.ts

@@ -15,7 +15,7 @@ export interface GetAggregateConformancePackComplianceSummaryCommandOutput exten
 }
 /**
  * <p>Returns the count of compliant and noncompliant conformance packs across all Amazon Web Services accounts and Amazon Web Services Regions in an aggregator. You can filter based on Amazon Web Services account ID or Amazon Web Services Region.</p>
- * 		       <note>
+ *          <note>
  *             <p>The results can return an empty result page, but if you have a nextToken, the results are displayed on the next page.</p>
  *          </note>
  * @example
@@ -36,7 +36,7 @@ export interface GetAggregateConformancePackComplianceSummaryCommandOutput exten
  *  <p>The specified limit is outside the allowable range.</p>
  *
  * @throws {@link InvalidNextTokenException} (client fault)
- *  <p>The specified next token is invalid. Specify the
+ *  <p>The specified next token is not valid. Specify the
  * 				<code>nextToken</code> string that was returned in the previous
  * 			response to get the next page of results.</p>
  *
@@ -44,9 +44,9 @@ export interface GetAggregateConformancePackComplianceSummaryCommandOutput exten
  *  <p>You have specified a configuration aggregator that does not exist.</p>
  *
  * @throws {@link ValidationException} (client fault)
- *  <p>The requested action is invalid.</p>
- * 		       <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
- * 		       <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
+ *  <p>The requested action is not valid.</p>
+ *          <p>For PutStoredQuery, you will see this exception if there are missing required fields or if the input value fails the validation, or if you are trying to create more than 300 queries.</p>
+ *          <p>For GetStoredQuery, ListStoredQuery, and DeleteStoredQuery you will see this exception if there are missing required fields or if the input value fails the validation.</p>
  *
  *
  */