@audiofab-io/fv1-core 0.6.1 → 0.6.2

package/blocks/effects/lo-fi/tape_degrade.atl

@@ -1,181 +1,181 @@
----
-{
-  "type": "fx.tape_degrade",
-  "name": "Tape Degrader",
-  "category": "Effects",
-  "subcategory": "Lo-Fi",
-  "description": "Simulates tape wow, flutter, and top-end age loss.",
-  "color": "#24F2F2",
-  "width": 180,
-  "inputs": [
-    {
-      "id": "in",
-      "name": "Input",
-      "type": "audio",
-      "required": true
-    },
-    {
-      "id": "wow_rate_cv",
-      "name": "Wow Rate",
-      "type": "control",
-      "required": false,
-      "parameter": "wow_rate"
-    },
-    {
-      "id": "wow_depth_cv",
-      "name": "Wow Depth",
-      "type": "control",
-      "required": false,
-      "parameter": "wow_depth"
-    },
-    {
-      "id": "flutter_rate_cv",
-      "name": "Flutter Rate",
-      "type": "control",
-      "required": false,
-      "parameter": "flutter_rate"
-    },
-    {
-      "id": "flutter_depth_cv",
-      "name": "Flutter Depth",
-      "type": "control",
-      "required": false,
-      "parameter": "flutter_depth"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "out",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "wow_rate",
-      "name": "Wow Rate (Hz)",
-      "type": "number",
-      "default": 0.5,
-      "min": 0.1,
-      "max": 2.0,
-      "step": 0.01,
-      "conversion": "HZ_TO_LFO_RATE"
-    },
-    {
-      "id": "wow_depth",
-      "name": "Wow Depth (ms)",
-      "type": "number",
-      "default": 1.5,
-      "min": 0,
-      "max": 5.0,
-      "step": 0.1,
-      "conversion": "MS_TO_LFO_RANGE"
-    },
-    {
-      "id": "flutter_rate",
-      "name": "Flutter Rate (Hz)",
-      "type": "number",
-      "default": 12.0,
-      "min": 5.0,
-      "max": 20.0,
-      "step": 0.1,
-      "conversion": "HZ_TO_LFO_RATE"
-    },
-    {
-      "id": "flutter_depth",
-      "name": "Flutter Depth (ms)",
-      "type": "number",
-      "default": 0.2,
-      "min": 0,
-      "max": 1.5,
-      "step": 0.01,
-      "conversion": "MS_TO_LFO_RANGE"
-    },
-    {
-      "id": "age",
-      "name": "Tape Age (Tone)",
-      "type": "number",
-      "default": 0.3,
-      "min": 0.01,
-      "max": 1.0,
-      "step": 0.01,
-      "description": "1.0 is bright, lower is darker (aged tape)."
-    }
-  ],
-  "memories": [
-    {
-      "id": "tape_buffer",
-      "size": 4096
-    }
-  ],
-  "registers": [
-    "wow_temp",
-    "lpf_lp"
-  ]
-}
----
-@section init
-  skp run, init_tape
-  wlds SIN0, ${wow_rate}, ${wow_depth}
-  wlds SIN1, ${flutter_rate}, ${flutter_depth}
-  init_tape:
-
-@section main
-  ; CV Modulation for Wow/Flutter 
-  ; Since rates are HZ_TO_LFO_RATE, we must scale them manually
-  @if pinConnected(wow_rate_cv)
-    rdax ${input.wow_rate_cv}, ${wow_rate} / 511.0
-    wrax SIN0_RATE, 0.0
-  @endif
-  
-  ; Depths are MS_TO_LFO_RANGE which goes up to 32767. So scale / 32767.0
-  @if pinConnected(wow_depth_cv)
-    rdax ${input.wow_depth_cv}, ${wow_depth} / 32767.0
-    wrax SIN0_RANGE, 0.0
-  @endif
-
-  @if pinConnected(flutter_rate_cv)
-    rdax ${input.flutter_rate_cv}, ${flutter_rate} / 511.0
-    wrax SIN1_RATE, 0.0
-  @endif
-  
-  @if pinConnected(flutter_depth_cv)
-    rdax ${input.flutter_depth_cv}, ${flutter_depth} / 32767.0
-    wrax SIN1_RANGE, 0.0
-  @endif
-
-  ; Write to Tape
-  rdax ${input.in}, 1.0
-  wra ${mem.tape_buffer}, 0.0
-
-  ; Read Wow Tape Head (SIN0)
-  @equals center ${mem.tape_buffer} + 2048
-  cho rda, SIN0, SIN | REG | COMPC, ${center}
-  cho rda, SIN0, SIN, ${center} + 1
-  
-  ; Modulate with Flutter (SIN1) off the same base, summing them creates composite warble
-  ; Actually, FV-1 CHO adds to ACC! So we just do another CHO RDA but without REG tracking?
-  ; To maintain unity volume, we shouldn't add audio signals, we should add address offsets.
-  ; But we can't add address offsets in SpinASM dynamically easily. 
-  ; Instead, we just read from the buffer with Flutter and average the two reads!
-  ; Multiply Wow read by 0.5
-  sof 0.5, 0.0
-  wrax ${reg.wow_temp}, 0.0 ; Hold Wow audio separately from LPF state
-
-  ; Read Flutter Tape Head (SIN1)
-  cho rda, SIN1, SIN | REG | COMPC, ${center}
-  cho rda, SIN1, SIN, ${center} + 1
-  sof 0.5, 0.0
-
-  ; Combine Wow and Flutter audio signals
-  rdax ${reg.wow_temp}, 1.0
-
-  ; Tape Age Degradation (1-Pole Lowpass: L_new = L_old + Age * (I - L_old))
-  ; ACC = composite warble (wow*0.5 + flutter*0.5)
-  rdax ${reg.lpf_lp}, -1.0          ; ACC = I - L_old
-  sof ${param.age}, 0.0             ; ACC = Age * (I - L_old)
-  rdax ${reg.lpf_lp}, 1.0           ; ACC = L_old + Age * (I - L_old) = L_new
-  wrax ${reg.lpf_lp}, 1.0           ; Save new state and keep L_new in ACC
-
-  ; Export
-  wrax ${output.out}, 0.0
+---
+{
+  "type": "fx.tape_degrade",
+  "name": "Tape Degrader",
+  "category": "Effects",
+  "subcategory": "Lo-Fi",
+  "description": "Simulates tape wow, flutter, and top-end age loss.",
+  "color": "#24F2F2",
+  "width": 180,
+  "inputs": [
+    {
+      "id": "in",
+      "name": "Input",
+      "type": "audio",
+      "required": true
+    },
+    {
+      "id": "wow_rate_cv",
+      "name": "Wow Rate",
+      "type": "control",
+      "required": false,
+      "parameter": "wow_rate"
+    },
+    {
+      "id": "wow_depth_cv",
+      "name": "Wow Depth",
+      "type": "control",
+      "required": false,
+      "parameter": "wow_depth"
+    },
+    {
+      "id": "flutter_rate_cv",
+      "name": "Flutter Rate",
+      "type": "control",
+      "required": false,
+      "parameter": "flutter_rate"
+    },
+    {
+      "id": "flutter_depth_cv",
+      "name": "Flutter Depth",
+      "type": "control",
+      "required": false,
+      "parameter": "flutter_depth"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "out",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "wow_rate",
+      "name": "Wow Rate (Hz)",
+      "type": "number",
+      "default": 0.5,
+      "min": 0.1,
+      "max": 2.0,
+      "step": 0.01,
+      "conversion": "HZ_TO_LFO_RATE"
+    },
+    {
+      "id": "wow_depth",
+      "name": "Wow Depth (ms)",
+      "type": "number",
+      "default": 1.5,
+      "min": 0,
+      "max": 5.0,
+      "step": 0.1,
+      "conversion": "MS_TO_LFO_RANGE"
+    },
+    {
+      "id": "flutter_rate",
+      "name": "Flutter Rate (Hz)",
+      "type": "number",
+      "default": 12.0,
+      "min": 5.0,
+      "max": 20.0,
+      "step": 0.1,
+      "conversion": "HZ_TO_LFO_RATE"
+    },
+    {
+      "id": "flutter_depth",
+      "name": "Flutter Depth (ms)",
+      "type": "number",
+      "default": 0.2,
+      "min": 0,
+      "max": 1.5,
+      "step": 0.01,
+      "conversion": "MS_TO_LFO_RANGE"
+    },
+    {
+      "id": "age",
+      "name": "Tape Age (Tone)",
+      "type": "number",
+      "default": 0.3,
+      "min": 0.01,
+      "max": 1.0,
+      "step": 0.01,
+      "description": "1.0 is bright, lower is darker (aged tape)."
+    }
+  ],
+  "memories": [
+    {
+      "id": "tape_buffer",
+      "size": 4096
+    }
+  ],
+  "registers": [
+    "wow_temp",
+    "lpf_lp"
+  ]
+}
+---
+@section init
+  skp run, init_tape
+  wlds SIN0, ${wow_rate}, ${wow_depth}
+  wlds SIN1, ${flutter_rate}, ${flutter_depth}
+  init_tape:
+
+@section main
+  ; CV Modulation for Wow/Flutter 
+  ; Since rates are HZ_TO_LFO_RATE, we must scale them manually
+  @if pinConnected(wow_rate_cv)
+    rdax ${input.wow_rate_cv}, ${wow_rate} / 511.0
+    wrax SIN0_RATE, 0.0
+  @endif
+  
+  ; Depths are MS_TO_LFO_RANGE which goes up to 32767. So scale / 32767.0
+  @if pinConnected(wow_depth_cv)
+    rdax ${input.wow_depth_cv}, ${wow_depth} / 32767.0
+    wrax SIN0_RANGE, 0.0
+  @endif
+
+  @if pinConnected(flutter_rate_cv)
+    rdax ${input.flutter_rate_cv}, ${flutter_rate} / 511.0
+    wrax SIN1_RATE, 0.0
+  @endif
+  
+  @if pinConnected(flutter_depth_cv)
+    rdax ${input.flutter_depth_cv}, ${flutter_depth} / 32767.0
+    wrax SIN1_RANGE, 0.0
+  @endif
+
+  ; Write to Tape
+  rdax ${input.in}, 1.0
+  wra ${mem.tape_buffer}, 0.0
+
+  ; Read Wow Tape Head (SIN0)
+  @equals center ${mem.tape_buffer} + 2048
+  cho rda, SIN0, SIN | REG | COMPC, ${center}
+  cho rda, SIN0, SIN, ${center} + 1
+  
+  ; Modulate with Flutter (SIN1) off the same base, summing them creates composite warble
+  ; Actually, FV-1 CHO adds to ACC! So we just do another CHO RDA but without REG tracking?
+  ; To maintain unity volume, we shouldn't add audio signals, we should add address offsets.
+  ; But we can't add address offsets in SpinASM dynamically easily. 
+  ; Instead, we just read from the buffer with Flutter and average the two reads!
+  ; Multiply Wow read by 0.5
+  sof 0.5, 0.0
+  wrax ${reg.wow_temp}, 0.0 ; Hold Wow audio separately from LPF state
+
+  ; Read Flutter Tape Head (SIN1)
+  cho rda, SIN1, SIN | REG | COMPC, ${center}
+  cho rda, SIN1, SIN, ${center} + 1
+  sof 0.5, 0.0
+
+  ; Combine Wow and Flutter audio signals
+  rdax ${reg.wow_temp}, 1.0
+
+  ; Tape Age Degradation (1-Pole Lowpass: L_new = L_old + Age * (I - L_old))
+  ; ACC = composite warble (wow*0.5 + flutter*0.5)
+  rdax ${reg.lpf_lp}, -1.0          ; ACC = I - L_old
+  sof ${param.age}, 0.0             ; ACC = Age * (I - L_old)
+  rdax ${reg.lpf_lp}, 1.0           ; ACC = L_old + Age * (I - L_old) = L_new
+  wrax ${reg.lpf_lp}, 1.0           ; Save new state and keep L_new in ACC
+
+  ; Export
+  wrax ${output.out}, 0.0

package/blocks/effects/modulation/chorus.atl

@@ -1,141 +1,141 @@
----
-{
-  "type": "fx.chorus",
-  "name": "Chorus",
-  "category": "Effects",
-  "subcategory": "Modulation",
-  "description": "Classic chorus with LFO-modulated delay",
-  "color": "#24f2f2",
-  "width": 180,
-  "inputs": [
-    {
-      "id": "in",
-      "name": "Input",
-      "type": "audio",
-      "required": true
-    },
-    {
-      "id": "lfo_rate",
-      "name": "LFO Rate",
-      "type": "control",
-      "required": false
-    },
-    {
-      "id": "lfo_width",
-      "name": "LFO Width",
-      "type": "control",
-      "required": false
-    }
-  ],
-  "outputs": [
-    {
-      "id": "out",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "baseDelay",
-      "name": "Base Delay (ms)",
-      "type": "number",
-      "default": 15,
-      "min": 1,
-      "max": 50,
-      "conversion": "MS_TO_SAMPLES",
-      "description": "Base delay time (center of modulation) in ms.",
-      "step": 0.1
-    },
-    {
-      "id": "rate",
-      "name": "LFO Rate (Hz)",
-      "type": "number",
-      "default": 1.0,
-      "min": 0.05,
-      "max": 10,
-      "conversion": "HZ_TO_LFO_RATE",
-      "description": "Frequency of the chorus modulation in Hz.",
-      "step": 0.01
-    },
-    {
-      "id": "width",
-      "name": "LFO Width (ms)",
-      "type": "number",
-      "default": 1,
-      "min": 0,
-      "max": 10,
-      "conversion": "MS_TO_LFO_RANGE",
-      "description": "The width of modulation in ms.",
-      "step": 0.1
-    },
-    {
-      "id": "lfoSel",
-      "name": "LFO Select",
-      "type": "select",
-      "default": 0,
-      "options": [
-        {
-          "value": 0,
-          "label": "LFO 0"
-        },
-        {
-          "value": 1,
-          "label": "LFO 1"
-        }
-      ]
-    }
-  ],
-  "memories": [
-    {
-      "id": "delayl",
-      "size": "${baseDelay} * 2"
-    }
-  ],
-  "registers": [
-  ]
-}
----
-@if isequalto lfoSel 0
-@equals lfoNum SIN0
-@equals lfoRateReg SIN0_RATE
-@equals lfoRange SIN0_RANGE
-@else
-@equals lfoNum SIN1
-@equals lfoRateReg SIN1_RATE
-@equals lfoRange SIN1_RANGE
-@endif
-
-@section init
-; Initialize LFO
-skp run, done_lfo
-wlds ${lfoNum}, ${rate}, ${width}
-done_lfo:
-
-@section main
-@multiplyDouble lfo_depth_delay width 0.5
-@multiplyDouble delay_mem_size baseDelay 2.0
-@assert lfo_depth_delay < delay_mem_size, "Maximum LFO depth exceeds delay memory bounds. Increase base delay or decrease LFO depth."
-
-; Chorus
-rdax ${input.in}, 1.0
-wra ${mem.delayl}, 0.0
-
-@if pinConnected(lfo_rate)
-rdax ${input.lfo_rate}, ${param.rate.max} / 511.0
-sof 1.0, ${param.rate.min} / 511.0
-wrax ${lfoRateReg}, 0.0
-@endif
-
-@if pinConnected(lfo_width)
-rdax ${input.lfo_width}, ${param.width.max} / 32767.0
-sof 1.0, ${param.width.min} / 32767.0
-wrax ${lfoRange}, 0.0
-@endif
-
-; Read modulated tap (wet signal)
-; center offset from start of delay line
-@equals center ${mem.delayl} + ${baseDelay}
-cho rda, ${lfoNum}, SIN | REG | COMPC, ${center}
-cho rda, ${lfoNum}, SIN, ${center} + 1
-
-wrax ${output.out}, 0.0
+---
+{
+  "type": "fx.chorus",
+  "name": "Chorus",
+  "category": "Effects",
+  "subcategory": "Modulation",
+  "description": "Classic chorus with LFO-modulated delay",
+  "color": "#24f2f2",
+  "width": 180,
+  "inputs": [
+    {
+      "id": "in",
+      "name": "Input",
+      "type": "audio",
+      "required": true
+    },
+    {
+      "id": "lfo_rate",
+      "name": "LFO Rate",
+      "type": "control",
+      "required": false
+    },
+    {
+      "id": "lfo_width",
+      "name": "LFO Width",
+      "type": "control",
+      "required": false
+    }
+  ],
+  "outputs": [
+    {
+      "id": "out",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "baseDelay",
+      "name": "Base Delay (ms)",
+      "type": "number",
+      "default": 15,
+      "min": 1,
+      "max": 50,
+      "conversion": "MS_TO_SAMPLES",
+      "description": "Base delay time (center of modulation) in ms.",
+      "step": 0.1
+    },
+    {
+      "id": "rate",
+      "name": "LFO Rate (Hz)",
+      "type": "number",
+      "default": 1.0,
+      "min": 0.05,
+      "max": 10,
+      "conversion": "HZ_TO_LFO_RATE",
+      "description": "Frequency of the chorus modulation in Hz.",
+      "step": 0.01
+    },
+    {
+      "id": "width",
+      "name": "LFO Width (ms)",
+      "type": "number",
+      "default": 1,
+      "min": 0,
+      "max": 10,
+      "conversion": "MS_TO_LFO_RANGE",
+      "description": "The width of modulation in ms.",
+      "step": 0.1
+    },
+    {
+      "id": "lfoSel",
+      "name": "LFO Select",
+      "type": "select",
+      "default": 0,
+      "options": [
+        {
+          "value": 0,
+          "label": "LFO 0"
+        },
+        {
+          "value": 1,
+          "label": "LFO 1"
+        }
+      ]
+    }
+  ],
+  "memories": [
+    {
+      "id": "delayl",
+      "size": "${baseDelay} * 2"
+    }
+  ],
+  "registers": [
+  ]
+}
+---
+@if isequalto lfoSel 0
+@equals lfoNum SIN0
+@equals lfoRateReg SIN0_RATE
+@equals lfoRange SIN0_RANGE
+@else
+@equals lfoNum SIN1
+@equals lfoRateReg SIN1_RATE
+@equals lfoRange SIN1_RANGE
+@endif
+
+@section init
+; Initialize LFO
+skp run, done_lfo
+wlds ${lfoNum}, ${rate}, ${width}
+done_lfo:
+
+@section main
+@multiplyDouble lfo_depth_delay width 0.5
+@multiplyDouble delay_mem_size baseDelay 2.0
+@assert lfo_depth_delay < delay_mem_size, "Maximum LFO depth exceeds delay memory bounds. Increase base delay or decrease LFO depth."
+
+; Chorus
+rdax ${input.in}, 1.0
+wra ${mem.delayl}, 0.0
+
+@if pinConnected(lfo_rate)
+rdax ${input.lfo_rate}, ${param.rate.max} / 511.0
+sof 1.0, ${param.rate.min} / 511.0
+wrax ${lfoRateReg}, 0.0
+@endif
+
+@if pinConnected(lfo_width)
+rdax ${input.lfo_width}, ${param.width.max} / 32767.0
+sof 1.0, ${param.width.min} / 32767.0
+wrax ${lfoRange}, 0.0
+@endif
+
+; Read modulated tap (wet signal)
+; center offset from start of delay line
+@equals center ${mem.delayl} + ${baseDelay}
+cho rda, ${lfoNum}, SIN | REG | COMPC, ${center}
+cho rda, ${lfoNum}, SIN, ${center} + 1
+
+wrax ${output.out}, 0.0