@audiofab-io/fv1-core 0.6.1 → 0.6.2

package/blocks/filter/1p_high_pass.atl

@@ -1,63 +1,63 @@
----
-{
-  "type": "filter.hpf_1p",
-  "category": "Filter",
-  "name": "1P HPF",
-  "description": "1-pole high pass filter",
-  "inputs": [
-    {
-      "id": "input",
-      "name": "Input",
-      "type": "audio"
-    },
-    {
-      "id": "freqControl",
-      "name": "Frequency",
-      "type": "control"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "output",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "freq",
-      "name": "Frequency",
-      "type": "number",
-      "min": 40,
-      "max": 3500,
-      "default": 100,
-      "conversion": "LOGFREQ"
-    }
-  ],
-  "color": "#24f26f",
-  "registers": [
-    "lpf1"
-  ]
-}
----
-@section header
-@comment "Generated from spincad source file HPF_RDFX.spincad"
-
-@section main
-// variable - Name - low - high - multiplier - precision - option 
-@if pinConnected(${input.input})
-@if pinConnected(Frequency)
-rdax ${input.input}, ${freq}
-rdax ${reg.lpf1}, -${freq}
-mulx ${input.freqControl}
-rdax ${reg.lpf1}, 1.0
-@else
-rdax ${input.input}, 1.0
-rdfx ${reg.lpf1}, ${freq}
-@endif
-wrax ${reg.lpf1}, -1.0
-// do a lowpass filter then subtract that from the ${input.input}.
-// voila high pass filter!
-rdax ${input.input}, 1.0
-wrax ${output.output}, 0
+---
+{
+  "type": "filter.hpf_1p",
+  "category": "Filter",
+  "name": "1P HPF",
+  "description": "1-pole high pass filter",
+  "inputs": [
+    {
+      "id": "input",
+      "name": "Input",
+      "type": "audio"
+    },
+    {
+      "id": "freqControl",
+      "name": "Frequency",
+      "type": "control"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "output",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "freq",
+      "name": "Frequency",
+      "type": "number",
+      "min": 40,
+      "max": 3500,
+      "default": 100,
+      "conversion": "LOGFREQ"
+    }
+  ],
+  "color": "#24f26f",
+  "registers": [
+    "lpf1"
+  ]
+}
+---
+@section header
+@comment "Generated from spincad source file HPF_RDFX.spincad"
+
+@section main
+// variable - Name - low - high - multiplier - precision - option 
+@if pinConnected(${input.input})
+@if pinConnected(Frequency)
+rdax ${input.input}, ${freq}
+rdax ${reg.lpf1}, -${freq}
+mulx ${input.freqControl}
+rdax ${reg.lpf1}, 1.0
+@else
+rdax ${input.input}, 1.0
+rdfx ${reg.lpf1}, ${freq}
+@endif
+wrax ${reg.lpf1}, -1.0
+// do a lowpass filter then subtract that from the ${input.input}.
+// voila high pass filter!
+rdax ${input.input}, 1.0
+wrax ${output.output}, 0
 @endif

package/blocks/filter/1p_low_pass.atl

@@ -1,59 +1,59 @@
----
-{
-  "type": "filter.lpf_1p",
-  "category": "Filter",
-  "name": "1P LPF",
-  "description": "1-pole low pass filter",
-  "inputs": [
-    {
-      "id": "input",
-      "name": "Input",
-      "type": "audio"
-    },
-    {
-      "id": "freqControl",
-      "name": "Frequency",
-      "type": "control"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "lpf1",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "freq",
-      "name": "Frequency",
-      "type": "number",
-      "min": 80,
-      "max": 5000,
-      "default": 100,
-      "conversion": "LOGFREQ"
-    }
-  ],
-  "color": "#24f26f",
-  "registers": [
-    "output"
-  ]
-}
----
-@section header
-@comment "Generated from spincad source file LPF_RDFX.spincad"
-
-@section main
-// variable - Name - low - high - multiplier - precision - option 
-@if pinConnected(${input.input})
-@if pinConnected(Frequency)
-rdax ${input.input}, ${freq}
-rdax ${output.lpf1}, -${freq}
-mulx ${input.freqControl}
-rdax ${output.lpf1}, 1.0
-@else
-rdax ${input.input}, 1.0
-rdfx ${output.lpf1}, ${freq}
-@endif
-wrax ${output.lpf1}, 0
+---
+{
+  "type": "filter.lpf_1p",
+  "category": "Filter",
+  "name": "1P LPF",
+  "description": "1-pole low pass filter",
+  "inputs": [
+    {
+      "id": "input",
+      "name": "Input",
+      "type": "audio"
+    },
+    {
+      "id": "freqControl",
+      "name": "Frequency",
+      "type": "control"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "lpf1",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "freq",
+      "name": "Frequency",
+      "type": "number",
+      "min": 80,
+      "max": 5000,
+      "default": 100,
+      "conversion": "LOGFREQ"
+    }
+  ],
+  "color": "#24f26f",
+  "registers": [
+    "output"
+  ]
+}
+---
+@section header
+@comment "Generated from spincad source file LPF_RDFX.spincad"
+
+@section main
+// variable - Name - low - high - multiplier - precision - option 
+@if pinConnected(${input.input})
+@if pinConnected(Frequency)
+rdax ${input.input}, ${freq}
+rdax ${output.lpf1}, -${freq}
+mulx ${input.freqControl}
+rdax ${output.lpf1}, 1.0
+@else
+rdax ${input.input}, 1.0
+rdfx ${output.lpf1}, ${freq}
+@endif
+wrax ${output.lpf1}, 0
 @endif

package/blocks/filter/auto_wah.atl

@@ -1,207 +1,207 @@
----
-{
-  "type": "filter.auto_wah",
-  "name": "Auto-Wah",
-  "category": "Filter",
-  "description": "Envelope-controlled resonant bandpass filter. Pick harder to open the filter — produces the talkbox-like vowel sweep made famous by the Living on a Prayer guitar intro.",
-  "color": "#f26724",
-  "width": 180,
-  "inputs": [
-    {
-      "id": "in",
-      "name": "Input",
-      "type": "audio",
-      "required": true
-    },
-    {
-      "id": "sensitivity_cv",
-      "name": "Sensitivity",
-      "type": "control",
-      "required": false,
-      "parameter": "sensitivity"
-    },
-    {
-      "id": "resonance_cv",
-      "name": "Resonance",
-      "type": "control",
-      "required": false,
-      "parameter": "resonance"
-    },
-    {
-      "id": "mix_cv",
-      "name": "Mix",
-      "type": "control",
-      "required": false,
-      "parameter": "mix"
-    }
-  ],
-  "outputs": [
-    {
-      "id": "out",
-      "name": "Output",
-      "type": "audio"
-    }
-  ],
-  "parameters": [
-    {
-      "id": "base_freq",
-      "name": "Base Freq",
-      "type": "number",
-      "default": 300,
-      "min": 100,
-      "max": 1500,
-      "step": 10,
-      "conversion": "SVFFREQ",
-      "description": "Lowest filter frequency (at silence). Sweep rises above this on transients."
-    },
-    {
-      "id": "sensitivity",
-      "name": "Sensitivity",
-      "type": "number",
-      "default": 0.55,
-      "min": 0.0,
-      "max": 0.6,
-      "step": 0.01,
-      "description": "How far the envelope opens the filter. Higher = wider vowel sweep."
-    },
-    {
-      "id": "resonance",
-      "name": "Resonance",
-      "type": "number",
-      "default": 0.82,
-      "min": 0.0,
-      "max": 0.97,
-      "step": 0.01,
-      "description": "Filter Q / resonant peak. Higher values add the characteristic vowel quack."
-    },
-    {
-      "id": "attack",
-      "name": "Attack",
-      "type": "number",
-      "default": 0.08,
-      "min": 0.01,
-      "max": 0.5,
-      "step": 0.01,
-      "description": "Envelope attack speed. Higher = faster response to pick transients."
-    },
-    {
-      "id": "release",
-      "name": "Release",
-      "type": "number",
-      "default": 0.004,
-      "min": 0.001,
-      "max": 0.05,
-      "step": 0.001,
-      "description": "Envelope release speed. Lower = slower filter close after note ends."
-    },
-    {
-      "id": "mix",
-      "name": "Dry/Wet Mix",
-      "type": "number",
-      "default": 1.0,
-      "min": 0.0,
-      "max": 1.0,
-      "step": 0.01
-    }
-  ],
-  "registers": [
-    "env",
-    "bp",
-    "lp",
-    "freq_reg",
-    "damp_reg",
-    "sens_reg",
-    "mix_reg",
-    "dry_val",
-    "temp"
-  ]
-}
----
-@section main
-@if pinConnected(in)
-
-  ; ======================================================
-  ; Stage 0: Save dry signal
-  ; ======================================================
-  rdax ${input.in}, 1.0
-  wrax ${reg.dry_val}, 0.0
-
-  ; ======================================================
-  ; Stage 1: Load CVs
-  ; ======================================================
-  @cv sensitivity_cv
-  wrax ${reg.sens_reg}, 0.0
-
-  @cv resonance_cv
-  sof -1.0, 1.0                      ; damp = 1 - resonance (high resonance → low damping)
-  wrax ${reg.damp_reg}, 0.0
-
-  @cv mix_cv
-  wrax ${reg.mix_reg}, 0.0
-
-  ; ======================================================
-  ; Stage 2: Envelope Follower (Fast Attack, Slow Release)
-  ; ======================================================
-  rdax ${input.in}, 1.0
-  sof 1.99, 0.0                      ; 2x pre-boost for detection only — env reaches higher values at normal guitar levels
-  absa
-  rdax ${reg.env}, -1.0              ; ACC = |input| - env
-  skp gez, ${local.ATK}
-  ; Release path
-  sof ${param.release}, 0.0
-  skp run, ${local.UPD}
-${local.ATK}:
-  sof ${param.attack}, 0.0
-${local.UPD}:
-  rdax ${reg.env}, 1.0               ; ACC = delta + env = new env
-  wrax ${reg.env}, 0.0
-
-  ; ======================================================
-  ; Stage 3: Compute Swept Frequency
-  ; freq = base_freq + env * sensitivity
-  ; ======================================================
-  rdax ${reg.env}, 1.0
-  mulx ${reg.sens_reg}               ; ACC = env * sensitivity
-  sof 1.0, ${param.base_freq}        ; ACC = base_freq + env * sensitivity
-  wrax ${reg.freq_reg}, 0.0
-
-  ; ======================================================
-  ; Stage 4: Chamberlin SVF — Bandpass output
-  ; HP = input - lp - damp*bp
-  ; bp_new = bp_old + F * HP
-  ; lp_new = lp_old + F * bp_new
-  ; ======================================================
-
-  ; Compute (input - lp_old) and save as temp
-  rdax ${input.in}, 1.0
-  rdax ${reg.lp}, -1.0
-  wrax ${reg.temp}, 0.0              ; temp = input - lp_old
-
-  ; Compute HP = (input - lp_old) - damp * bp_old
-  rdax ${reg.bp}, 1.0
-  mulx ${reg.damp_reg}               ; ACC = damp * bp_old
-  rdax ${reg.temp}, -1.0             ; ACC = damp*bp_old - (input - lp_old)
-  sof -1.0, 0.0                      ; ACC = HP = (input - lp_old) - damp*bp_old
-
-  ; bp_new = bp_old + F * HP
-  mulx ${reg.freq_reg}               ; ACC = F * HP
-  rdax ${reg.bp}, 1.0                ; ACC = bp_old + F * HP
-  wrax ${reg.bp}, 1.0                ; Save bp_new, keep in ACC
-
-  ; lp_new = lp_old + F * bp_new
-  mulx ${reg.freq_reg}               ; ACC = F * bp_new
-  rdax ${reg.lp}, 1.0                ; ACC = lp_old + F * bp_new
-  wrax ${reg.lp}, 0.0                ; Save lp_new
-
-  ; ======================================================
-  ; Stage 5: Dry/Wet Mix
-  ; out = dry + (wet - dry) * mix
-  ; ======================================================
-  rdax ${reg.bp}, 0.7                ; Bandpass: vowel/formant peak (dominant)
-  rdax ${reg.lp}, 0.3                ; Lowpass: adds fundamental body — pure BP sounds thin
-  rdax ${reg.dry_val}, -1.0          ; ACC = wet - dry
-  mulx ${reg.mix_reg}                ; ACC = (wet - dry) * mix
-  rdax ${reg.dry_val}, 1.0           ; ACC = dry + (wet - dry) * mix
-  wrax ${output.out}, 0.0
-
-@endif
+---
+{
+  "type": "filter.auto_wah",
+  "name": "Auto-Wah",
+  "category": "Filter",
+  "description": "Envelope-controlled resonant bandpass filter. Pick harder to open the filter — produces the talkbox-like vowel sweep made famous by the Living on a Prayer guitar intro.",
+  "color": "#f26724",
+  "width": 180,
+  "inputs": [
+    {
+      "id": "in",
+      "name": "Input",
+      "type": "audio",
+      "required": true
+    },
+    {
+      "id": "sensitivity_cv",
+      "name": "Sensitivity",
+      "type": "control",
+      "required": false,
+      "parameter": "sensitivity"
+    },
+    {
+      "id": "resonance_cv",
+      "name": "Resonance",
+      "type": "control",
+      "required": false,
+      "parameter": "resonance"
+    },
+    {
+      "id": "mix_cv",
+      "name": "Mix",
+      "type": "control",
+      "required": false,
+      "parameter": "mix"
+    }
+  ],
+  "outputs": [
+    {
+      "id": "out",
+      "name": "Output",
+      "type": "audio"
+    }
+  ],
+  "parameters": [
+    {
+      "id": "base_freq",
+      "name": "Base Freq",
+      "type": "number",
+      "default": 300,
+      "min": 100,
+      "max": 1500,
+      "step": 10,
+      "conversion": "SVFFREQ",
+      "description": "Lowest filter frequency (at silence). Sweep rises above this on transients."
+    },
+    {
+      "id": "sensitivity",
+      "name": "Sensitivity",
+      "type": "number",
+      "default": 0.55,
+      "min": 0.0,
+      "max": 0.6,
+      "step": 0.01,
+      "description": "How far the envelope opens the filter. Higher = wider vowel sweep."
+    },
+    {
+      "id": "resonance",
+      "name": "Resonance",
+      "type": "number",
+      "default": 0.82,
+      "min": 0.0,
+      "max": 0.97,
+      "step": 0.01,
+      "description": "Filter Q / resonant peak. Higher values add the characteristic vowel quack."
+    },
+    {
+      "id": "attack",
+      "name": "Attack",
+      "type": "number",
+      "default": 0.08,
+      "min": 0.01,
+      "max": 0.5,
+      "step": 0.01,
+      "description": "Envelope attack speed. Higher = faster response to pick transients."
+    },
+    {
+      "id": "release",
+      "name": "Release",
+      "type": "number",
+      "default": 0.004,
+      "min": 0.001,
+      "max": 0.05,
+      "step": 0.001,
+      "description": "Envelope release speed. Lower = slower filter close after note ends."
+    },
+    {
+      "id": "mix",
+      "name": "Dry/Wet Mix",
+      "type": "number",
+      "default": 1.0,
+      "min": 0.0,
+      "max": 1.0,
+      "step": 0.01
+    }
+  ],
+  "registers": [
+    "env",
+    "bp",
+    "lp",
+    "freq_reg",
+    "damp_reg",
+    "sens_reg",
+    "mix_reg",
+    "dry_val",
+    "temp"
+  ]
+}
+---
+@section main
+@if pinConnected(in)
+
+  ; ======================================================
+  ; Stage 0: Save dry signal
+  ; ======================================================
+  rdax ${input.in}, 1.0
+  wrax ${reg.dry_val}, 0.0
+
+  ; ======================================================
+  ; Stage 1: Load CVs
+  ; ======================================================
+  @cv sensitivity_cv
+  wrax ${reg.sens_reg}, 0.0
+
+  @cv resonance_cv
+  sof -1.0, 1.0                      ; damp = 1 - resonance (high resonance → low damping)
+  wrax ${reg.damp_reg}, 0.0
+
+  @cv mix_cv
+  wrax ${reg.mix_reg}, 0.0
+
+  ; ======================================================
+  ; Stage 2: Envelope Follower (Fast Attack, Slow Release)
+  ; ======================================================
+  rdax ${input.in}, 1.0
+  sof 1.99, 0.0                      ; 2x pre-boost for detection only — env reaches higher values at normal guitar levels
+  absa
+  rdax ${reg.env}, -1.0              ; ACC = |input| - env
+  skp gez, ${local.ATK}
+  ; Release path
+  sof ${param.release}, 0.0
+  skp run, ${local.UPD}
+${local.ATK}:
+  sof ${param.attack}, 0.0
+${local.UPD}:
+  rdax ${reg.env}, 1.0               ; ACC = delta + env = new env
+  wrax ${reg.env}, 0.0
+
+  ; ======================================================
+  ; Stage 3: Compute Swept Frequency
+  ; freq = base_freq + env * sensitivity
+  ; ======================================================
+  rdax ${reg.env}, 1.0
+  mulx ${reg.sens_reg}               ; ACC = env * sensitivity
+  sof 1.0, ${param.base_freq}        ; ACC = base_freq + env * sensitivity
+  wrax ${reg.freq_reg}, 0.0
+
+  ; ======================================================
+  ; Stage 4: Chamberlin SVF — Bandpass output
+  ; HP = input - lp - damp*bp
+  ; bp_new = bp_old + F * HP
+  ; lp_new = lp_old + F * bp_new
+  ; ======================================================
+
+  ; Compute (input - lp_old) and save as temp
+  rdax ${input.in}, 1.0
+  rdax ${reg.lp}, -1.0
+  wrax ${reg.temp}, 0.0              ; temp = input - lp_old
+
+  ; Compute HP = (input - lp_old) - damp * bp_old
+  rdax ${reg.bp}, 1.0
+  mulx ${reg.damp_reg}               ; ACC = damp * bp_old
+  rdax ${reg.temp}, -1.0             ; ACC = damp*bp_old - (input - lp_old)
+  sof -1.0, 0.0                      ; ACC = HP = (input - lp_old) - damp*bp_old
+
+  ; bp_new = bp_old + F * HP
+  mulx ${reg.freq_reg}               ; ACC = F * HP
+  rdax ${reg.bp}, 1.0                ; ACC = bp_old + F * HP
+  wrax ${reg.bp}, 1.0                ; Save bp_new, keep in ACC
+
+  ; lp_new = lp_old + F * bp_new
+  mulx ${reg.freq_reg}               ; ACC = F * bp_new
+  rdax ${reg.lp}, 1.0                ; ACC = lp_old + F * bp_new
+  wrax ${reg.lp}, 0.0                ; Save lp_new
+
+  ; ======================================================
+  ; Stage 5: Dry/Wet Mix
+  ; out = dry + (wet - dry) * mix
+  ; ======================================================
+  rdax ${reg.bp}, 0.7                ; Bandpass: vowel/formant peak (dominant)
+  rdax ${reg.lp}, 0.3                ; Lowpass: adds fundamental body — pure BP sounds thin
+  rdax ${reg.dry_val}, -1.0          ; ACC = wet - dry
+  mulx ${reg.mix_reg}                ; ACC = (wet - dry) * mix
+  rdax ${reg.dry_val}, 1.0           ; ACC = dry + (wet - dry) * mix
+  wrax ${output.out}, 0.0
+
+@endif