@arcgis/charts-components 4.33.0-next.137 → 4.33.0-next.138

package/dist/chunks/messages.zh-TW2.js

@@ -1,46 +1,22 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const t = "載入圖表時出錯。", a = "無法將對數轉換套用於負值或零值。", e = "無法將平方根轉換套用於負值。", s = "載入圖層時出錯。 URL = ${ url }。 入口網站項目 ID = ${ portalItemId }。", o = "在圖層中找不到配置中定義的欄位 [${ fieldNames }]。", n = "${ dataPath } 必須唯一。 名為 ${ seriesName } 的數列具有其他數列已在使用的 ID (${ seriesID })。", r = "${ dataPath } 無法在非數值欄位上執行非計數匯聚。", i = "${ dataPath } 缺少名為 ${ missingProperty } 的屬性。", d = "${ dataPath } 不應短於 ${ limit } 個字元。", c = "${ dataPath } 的項目數不應少於 ${ limit } 個。", l = "${ dataPath } 的項目數不應多於 ${ limit } 個。", $ = "${ dataPath } 至少必須有一個非空白字元。", m = "${ dataPath } 不能有 ${ additionalProperty }。", u = "${ dataPath } 必須等於下列其中一個允許值: ${ allowedValues }。", h = "${ dataPath } 必須符合下列其中一項結構描述: ${ schemaOptions }。", P = "不支援包含比例符號的散點圖。 已套用預設符號大小。", p = "無法讀取輸入資料。", y = "索引 ${ seriesIndex } 上預期的數列類型為 '${ expectedType }'，但改為接收 '${ receivedType }'", I = "或", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: s,
-  layerFieldsNotFound: o,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: d,
-  minItems: c,
-  maxItems: l,
-  whiteSpacePattern: $,
-  additionalProperty: m,
-  enumValues: u,
-  anyOfValues: h,
-  bubbleChartValidateMsg: P,
-  queryError: p,
-  invalidSeriesType: y,
-  or: I
+v4.33.0-next.138 */
+const t = { chart: "圖表", barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "散點圖", boxPlot: "盒狀圖" }, e = { mean: "平均值", median: "中位數", sum: "總和", discretePercentile: "離散百分位數", minimum: "最小值", maximum: "最大值", variance: "變異", count: "計數", aggregation: "${ statistics }/${ fieldName }", noAggregation: "無匯聚" }, a = "圖表", s = "計數序列", i = "X 軸", n = "無法取得", o = { start: "貼齊至第一個資料點", end: "對齊至最後的資料點" }, c = {
+  chartType: t,
+  statistics: e,
+  defaultTitle: a,
+  countSeries: s,
+  xAxis: i,
+  notAvailable: n,
+  timeAggregationTypes: o
 };
 export {
-  m as additionalProperty,
-  h as anyOfValues,
-  P as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  o as layerFieldsNotFound,
-  s as layerLoadFailure,
-  l as maxItems,
-  c as minItems,
-  d as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  p as queryError,
-  i as requiredProperty,
-  $ as whiteSpacePattern
+  t as chartType,
+  s as countSeries,
+  c as default,
+  a as defaultTitle,
+  n as notAvailable,
+  e as statistics,
+  o as timeAggregationTypes,
+  i as xAxis
 };

package/dist/chunks/messages.zh-TW3.js

@@ -1,22 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const t = { chart: "圖表", barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "散點圖", boxPlot: "盒狀圖" }, e = { mean: "平均值", median: "中位數", sum: "總和", discretePercentile: "離散百分位數", minimum: "最小值", maximum: "最大值", variance: "變異", count: "計數", aggregation: "${ statistics }/${ fieldName }", noAggregation: "無匯聚" }, a = "圖表", s = "計數序列", i = "X 軸", n = "無法取得", o = { start: "貼齊至第一個資料點", end: "對齊至最後的資料點" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
+v4.33.0-next.138 */
+const _ = "試_Play_________驗", e = "試_Stop_________驗", o = "試_Legend_____________驗", r = "試_Loading_______________驗", t = "試_Home_________驗", s = "試_Chart___________驗", a = "試_Series_____________驗", n = "試_Export_____________驗", i = "試_Image___________驗", l = "試_Data_________驗", d = "試_Print___________驗", c = {
+  "Zoom Out": "試_Zoom Out_________________驗",
+  Play: _,
+  Stop: e,
+  Legend: o,
+  "Press ENTER to toggle": "試_Press ENTER to toggle______________________驗",
+  Loading: r,
+  Home: t,
+  Chart: s,
+  "Serial chart": "試_Serial chart_____________驗",
+  "X/Y chart": "試_X/Y chart___________________驗",
+  "Pie chart": "試_Pie chart___________________驗",
+  "Gauge chart": "試_Gauge chart____________驗",
+  "Radar chart": "試_Radar chart____________驗",
+  "Sankey diagram": "試_Sankey diagram_______________驗",
+  "Flow diagram": "試_Flow diagram_____________驗",
+  "Chord diagram": "試_Chord diagram______________驗",
+  "TreeMap chart": "試_TreeMap chart______________驗",
+  "Sliced chart": "試_Sliced chart_____________驗",
+  Series: a,
+  "Candlestick Series": "試_Candlestick Series___________________驗",
+  "OHLC Series": "試_OHLC Series____________驗",
+  "Column Series": "試_Column Series______________驗",
+  "Line Series": "試_Line Series____________驗",
+  "Pie Slice Series": "試_Pie Slice Series_________________驗",
+  "Funnel Series": "試_Funnel Series______________驗",
+  "Pyramid Series": "試_Pyramid Series_______________驗",
+  "X/Y Series": "試_X/Y Series_____________________驗",
+  Map: "試_Map_______驗",
+  "Press ENTER to zoom in": "試_Press ENTER to zoom in_______________________驗",
+  "Press ENTER to zoom out": "試_Press ENTER to zoom out________________________驗",
+  "Use arrow keys to zoom in and out": "試_Use arrow keys to zoom in and out__________________驗",
+  "Use plus and minus keys on your keyboard to zoom in and out": "試_Use plus and minus keys on your keyboard to zoom in and out_______________________________驗",
+  Export: n,
+  Image: i,
+  Data: l,
+  Print: d,
+  "Press ENTER to open": "試_Press ENTER to open____________________驗",
+  "Press ENTER to print.": "試_Press ENTER to print______________________驗.",
+  "Press ENTER to export as %1.": "試_Press ENTER to export as %1_____________________________驗.",
+  "(Press ESC to close this message)": "試_(Press ESC to close this message)__________________驗",
+  "Image Export Complete": "試_Image Export Complete______________________驗",
+  "Export operation took longer than expected. Something might have gone wrong.": "試_Export operation took longer than expected. Something might have gone wrong_______________________________________驗.",
+  "Saved from": "試_Saved from_____________________驗",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "試_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________驗",
+  "Use left and right arrows to move selection": "試_Use left and right arrows to move selection_______________________驗",
+  "Use left and right arrows to move left selection": "試_Use left and right arrows to move left selection_________________________驗",
+  "Use left and right arrows to move right selection": "試_Use left and right arrows to move right selection__________________________驗",
+  "Use TAB select grip buttons or up and down arrows to change selection": "試_Use TAB select grip buttons or up and down arrows to change selection____________________________________驗",
+  "Use up and down arrows to move selection": "試_Use up and down arrows to move selection_____________________驗",
+  "Use up and down arrows to move lower selection": "試_Use up and down arrows to move lower selection________________________驗",
+  "Use up and down arrows to move upper selection": "試_Use up and down arrows to move upper selection________________________驗",
+  "From %1 to %2": "試_From %1 to %2______________驗",
+  "From %1": "試_From %1_______________驗",
+  "To %1": "試_To %1___________驗",
+  "No parser available for file: %1": "試_No parser available for file: %1_________________驗",
+  "Error parsing file: %1": "試_Error parsing file: %1_______________________驗",
+  "Unable to load file: %1": "試_Unable to load file: %1________________________驗",
+  "Invalid date": "試_Invalid date_____________驗"
 };
 export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
+  s as Chart,
+  l as Data,
+  n as Export,
+  t as Home,
+  i as Image,
+  o as Legend,
+  r as Loading,
+  _ as Play,
+  d as Print,
+  a as Series,
+  e as Stop,
+  c as default
 };

package/dist/chunks/messages.zh-TW4.js

@@ -1,77 +1,14 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const _ = "試_Play_________驗", e = "試_Stop_________驗", o = "試_Legend_____________驗", r = "試_Loading_______________驗", t = "試_Home_________驗", s = "試_Chart___________驗", a = "試_Series_____________驗", n = "試_Export_____________驗", i = "試_Image___________驗", l = "試_Data_________驗", d = "試_Print___________驗", c = {
-  "Zoom Out": "試_Zoom Out_________________驗",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "試_Press ENTER to toggle______________________驗",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "試_Serial chart_____________驗",
-  "X/Y chart": "試_X/Y chart___________________驗",
-  "Pie chart": "試_Pie chart___________________驗",
-  "Gauge chart": "試_Gauge chart____________驗",
-  "Radar chart": "試_Radar chart____________驗",
-  "Sankey diagram": "試_Sankey diagram_______________驗",
-  "Flow diagram": "試_Flow diagram_____________驗",
-  "Chord diagram": "試_Chord diagram______________驗",
-  "TreeMap chart": "試_TreeMap chart______________驗",
-  "Sliced chart": "試_Sliced chart_____________驗",
-  Series: a,
-  "Candlestick Series": "試_Candlestick Series___________________驗",
-  "OHLC Series": "試_OHLC Series____________驗",
-  "Column Series": "試_Column Series______________驗",
-  "Line Series": "試_Line Series____________驗",
-  "Pie Slice Series": "試_Pie Slice Series_________________驗",
-  "Funnel Series": "試_Funnel Series______________驗",
-  "Pyramid Series": "試_Pyramid Series_______________驗",
-  "X/Y Series": "試_X/Y Series_____________________驗",
-  Map: "試_Map_______驗",
-  "Press ENTER to zoom in": "試_Press ENTER to zoom in_______________________驗",
-  "Press ENTER to zoom out": "試_Press ENTER to zoom out________________________驗",
-  "Use arrow keys to zoom in and out": "試_Use arrow keys to zoom in and out__________________驗",
-  "Use plus and minus keys on your keyboard to zoom in and out": "試_Use plus and minus keys on your keyboard to zoom in and out_______________________________驗",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "試_Press ENTER to open____________________驗",
-  "Press ENTER to print.": "試_Press ENTER to print______________________驗.",
-  "Press ENTER to export as %1.": "試_Press ENTER to export as %1_____________________________驗.",
-  "(Press ESC to close this message)": "試_(Press ESC to close this message)__________________驗",
-  "Image Export Complete": "試_Image Export Complete______________________驗",
-  "Export operation took longer than expected. Something might have gone wrong.": "試_Export operation took longer than expected. Something might have gone wrong_______________________________________驗.",
-  "Saved from": "試_Saved from_____________________驗",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "試_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________驗",
-  "Use left and right arrows to move selection": "試_Use left and right arrows to move selection_______________________驗",
-  "Use left and right arrows to move left selection": "試_Use left and right arrows to move left selection_________________________驗",
-  "Use left and right arrows to move right selection": "試_Use left and right arrows to move right selection__________________________驗",
-  "Use TAB select grip buttons or up and down arrows to change selection": "試_Use TAB select grip buttons or up and down arrows to change selection____________________________________驗",
-  "Use up and down arrows to move selection": "試_Use up and down arrows to move selection_____________________驗",
-  "Use up and down arrows to move lower selection": "試_Use up and down arrows to move lower selection________________________驗",
-  "Use up and down arrows to move upper selection": "試_Use up and down arrows to move upper selection________________________驗",
-  "From %1 to %2": "試_From %1 to %2______________驗",
-  "From %1": "試_From %1_______________驗",
-  "To %1": "試_To %1___________驗",
-  "No parser available for file: %1": "試_No parser available for file: %1_________________驗",
-  "Error parsing file: %1": "試_Error parsing file: %1_______________________驗",
-  "Unable to load file: %1": "試_Unable to load file: %1________________________驗",
-  "Invalid date": "試_Invalid date_____________驗"
+v4.33.0-next.138 */
+const e = { percent: "百分比", values: "值", standardizedValues: "標準化值", count: "計數", aggregationOfValues: "值的 ${ aggregation }", aggregationOfFieldName: "${ aggregation }/${ fieldName }" }, g = { aggrFieldsByCategory: "按 ${ category } 排列的 ${ aggregationFields }", aggrTypeCategory: "按 ${ category } 排列的 ${ aggregationType }", aggrTypeCategoryBySplitBy: "按 ${ category } 和 ${ splitByField } 排列的 ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType }/${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "按 ${ category } 和 ${ splitByField } 排列之 ${ aggregationField } 的 ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "按 ${ aggregationType } 排列之 ${ category } 的 ${ aggregationFields }", aggrFieldsByXAxisField: "按 ${ xAxisField } 排列的 ${ aggregationFields }", aggrTypeXAxisField: "按 ${ xAxisField } 排列的 ${ aggregationType }", aggrTypeXAxisFieldBySplitBy: "按 ${ xAxisField } 和 ${ splitByField } 排列的 ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "按 ${ xAxisField } 和 ${ splitByField } 排列之 ${ aggregationField } 的 ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "按 ${ aggregationType } 排列之 ${ xAxisField } 的 ${ aggregationFields }", distributionOfField: "${ valueField } 的分佈", distributionOfFields: "${ valueFields } 的分佈", distributionOfFieldsByCategory: "按 ${ category } 的 ${ valueFields } 分佈", distributionOfFieldsByCategoryAndSplitBy: "按 ${ category } 和 ${ splitByField } 的 ${ valueFields } 分佈", xAndY: "${ x } 和 ${ y }" }, i = { barChart: "長條圖", lineChart: "折線圖", pieChart: "圓餅圖", histogram: "直方圖", scatterplot: "散點圖" }, a = {
+  axisLabels: e,
+  titleLabels: g,
+  chartType: i
 };
 export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
+  e as axisLabels,
+  i as chartType,
+  a as default,
+  g as titleLabels
 };

package/dist/chunks/model-with-baseline-stacking.js

@@ -0,0 +1,236 @@
+import { C as s } from "./serial-chart-data.js";
+import { s as a } from "./serial-chart-model.js";
+import { g as n, a as o, e as g, b as l, f as h, s as f, h as c, c as S, i as d, d as k, j as C, k as M, t as m, u as _, l as L, m as t, n as u, o as p, p as V, q as b, r as y } from "./baseline-stacking.js";
+/*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
+See https://js.arcgis.com/4.33/esri/copyright.txt for details.
+v4.33.0-next.138 */
+class v extends s {
+  /**
+   * Gets the line style of the series based on the series index. If the index is out of bounds, it will return `undefined`.
+   * @param {number} seriesIndex The index of the series.
+   * @returns {RESTSimpleLineSymbolStyle | undefined}
+   */
+  getSeriesLineStyle(e) {
+    return n(e, this._config);
+  }
+  /**
+   * Sets the line style of the series based on the series index.
+   * @param {RESTSimpleLineSymbolStyle | undefined} style The new style for the series.
+   * @param {number} seriesIndex The index of the series.
+   */
+  setSeriesLineStyle(e, i) {
+    o(e, i, this._config), this.emitConfigUpdate("setSeriesLineStyle");
+  }
+  /**
+   * Gets the line width of the series based on the series index. If the index is out of bounds, it will return `undefined`.
+   * @param {number} seriesIndex The index of the series.
+   * @returns {number | undefined}
+   */
+  getSeriesLineWidth(e) {
+    return g(e, this._config);
+  }
+  /**
+   * Sets the line width of the series based on the series index.
+   * @param {number | undefined} width The new width for the series.
+   * @param {number} seriesIndex The index of the series.
+   */
+  setSeriesLineWidth(e, i) {
+    l(e, i, this._config), this.emitConfigUpdate("setSeriesLineWidth");
+  }
+  /**
+   * Gets the marker color of the series based on the series index. If the index is out of bounds, it will return `undefined`.
+   * @param {number} seriesIndex The index of the series.
+   * @returns {Color | undefined}
+   */
+  getSeriesMarkerColor(e) {
+    return h(e, this._config);
+  }
+  /**
+   * Sets the marker color of the series based on the series index.
+   * @param {Color | undefined} color The new color for the series.
+   * @param {number} seriesIndex The index of the series.
+   */
+  setSeriesMarkerColor(e, i) {
+    f(e, i, this._config), this.emitConfigUpdate("setSeriesMarkerColor");
+  }
+  /**
+   * Gets the marker style of the series based on the series index. If the index is out of bounds, it will return `undefined`.
+   * @param {number} seriesIndex The index of the series.
+   * @returns {RESTSimpleMarkerSymbolStyle | undefined}
+   */
+  getSeriesMarkerStyle(e) {
+    return c(e, this._config);
+  }
+  /**
+   * Sets the marker style of the series based on the series index.
+   * @param {RESTSimpleMarkerSymbolStyle | undefined} style The new style for the series.
+   * @param {number} seriesIndex The index of the series.
+   */
+  setSeriesMarkerStyle(e, i) {
+    S(e, i, this._config), this.emitConfigUpdate("setSeriesMarkerStyle");
+  }
+  /**
+   * Gets the marker size of the series based on the series index. If the index is out of bounds, it will return `undefined`.
+   * @param {number} seriesIndex The index of the series.
+   * @returns {number | undefined}
+   */
+  getSeriesMarkerSize(e) {
+    return d(e, this._config);
+  }
+  /**
+   * Sets the marker size of the series based on the series index.
+   * @param {number | undefined} size The new size for the series.
+   * @param {number} seriesIndex The index of the series.
+   */
+  setSeriesMarkerSize(e, i) {
+    k(e, i, this._config), this.emitConfigUpdate("setSeriesMarkerSize");
+  }
+  /**
+   * Specify whether line segments of the series should be smoothed.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * @default false
+   * @returns {boolean}
+   */
+  isLineSmoothed(e) {
+    return C(e, this._config);
+  }
+  /**
+   * Specify whether line segments of the series should be smoothed.
+   * @param {boolean} props.smoothed - `true` if line segment of the series should be smoothed, `false` otherwise.
+   * @param {number} props.seriesIndex - The index of the series.
+   */
+  setLineSmoothed(e, i) {
+    M({
+      smoothed: e,
+      seriesIndex: i,
+      config: this._config
+    }), this.emitConfigUpdate("setLineSmoothed");
+  }
+  /**
+   * Specify the color of the filled area for line chart.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * @returns {boolean | undefined}
+   */
+  getConnectLines(e) {
+    return m(e, this._config);
+  }
+  /**
+   * Specify the color of the filled area for line chart.
+   * @param {boolean | undefined} props.color - The color of the filled area for line chart.
+   * @param {number} props.seriesIndex - The index of the series.
+   *
+   * NOTE: Can be overridden by the temporal data setting `nullPolicy`.
+   *
+   */
+  setConnectLines(e, i) {
+    _({
+      connect: e,
+      seriesIndex: i,
+      config: this._config
+    }), this.emitConfigUpdate("setConnectLines");
+  }
+  /**
+   * Specify whether the line series should show area.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * @default false
+   * @returns {boolean}
+   */
+  isAreaVisible(e) {
+    return L(e, this._config);
+  }
+  /**
+   * Specify whether the line series should show area.
+   * @param {boolean} props.visible - `true` if the line series should show area, `false` otherwise.
+   * @param {number} props.seriesIndex - The index of the series.
+   */
+  setAreaVisible(e, i) {
+    t({
+      visible: e,
+      seriesIndex: i,
+      config: this._config
+    }), this.emitConfigUpdate("setAreaVisible");
+  }
+  /**
+   * Indicate whether to show or hide the markers/bullets of the line series.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * @default true
+   * @returns {boolean}
+   */
+  isMarkerVisible(e) {
+    return u(e, this._config);
+  }
+  /**
+   * Indicate whether to show or hide the markers/bullets of the line series.
+   * @param {boolean} props.visible - `true` if the markers/bullets of the line series should be shown, `false` otherwise.
+   * @param {number} props.seriesIndex - The index of the series.
+   */
+  setMarkerVisible(e, i) {
+    p({
+      visible: e,
+      seriesIndex: i,
+      config: this._config
+    }), this.emitConfigUpdate("setMarkerVisible");
+  }
+  /**
+   * Specify the color of the filled area for line chart.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * NOTE: areaColor will be applied only if `showArea` is true, and is defaulted to the line color if not provided.
+   *
+   * @returns {Color | undefined}
+   */
+  getAreaColor(e) {
+    return V(e, this._config);
+  }
+  /**
+   * Specify the color of the filled area for line chart.
+   * @param {Color | undefined} props.color - The color of the filled area for line chart.
+   * @param {number} props.seriesIndex - The index of the series.
+   */
+  setAreaColor(e, i) {
+    t({
+      visible: !0,
+      seriesIndex: i,
+      config: this._config
+    }), a(e, i, this._config), this.emitConfigUpdate("setAreaColor");
+  }
+}
+class B extends s {
+  /**
+   * Specify how negative values are treated in stacked series.
+   * @param {number} seriesIndex - The index of the series.
+   *
+   * NOTE: If true, negative values will be stacked on the base line.
+   * If false, negative values will be stacked in relation to their previous values in the stack.
+   *
+   * @default true
+   * @returns {boolean}
+   */
+  isNegativeValuesStackedToBaseline(e) {
+    return b(e, this._config);
+  }
+  /**
+   * Specify how negative values are treated in stacked series.
+   * @param {boolean} props.stackedToBaseline - `true` if negative values should be stacked on the base line, `false` otherwise.
+   * @param {number} props.seriesIndex - The index of the series.
+   *
+   * NOTE: If true, negative values will be stacked on the base line.
+   * If false, negative values will be stacked in relation to their previous values in the stack.
+   *
+   */
+  setNegativeValuesStackedToBaseline(e, i) {
+    y({
+      stackNegativeValuesToBaseline: e,
+      seriesIndex: i,
+      config: this._config
+    }), this.emitConfigUpdate("setNegativeValuesStackedToBaseline");
+  }
+}
+export {
+  B as M,
+  v as a
+};