@arcgis/charts-components 4.33.0-next.137 → 4.33.0-next.138

package/dist/chunks/messages.ko.js

@@ -1,14 +1,48 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const e = { percent: "백분율", values: "값", standardizedValues: "표준화된 값", count: "개수", aggregationOfValues: "값의 ${ aggregation }", aggregationOfFieldName: "${ aggregation }개 중 ${ fieldName }개" }, g = { aggrFieldsByCategory: "${ aggregationFields } 작성자 ${ category }", aggrTypeCategory: "${ aggregationType } 작성자 ${ category }", aggrTypeCategoryBySplitBy: "${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType } / ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationField }, ${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "${ aggregationFields }, ${ category } 기준 ${ aggregationType }", aggrFieldsByXAxisField: "${ aggregationFields } 작성자 ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } 작성자 ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationField }, ${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationFields }, ${ xAxisField } 기준 ${ aggregationType }", distributionOfField: "${ valueField }의 분산", distributionOfFields: "${ valueFields }의 분포", distributionOfFieldsByCategory: "${ category } 기준 ${ valueFields }의 분포", distributionOfFieldsByCategoryAndSplitBy: "${ category } 및 ${ splitByField } 기준 ${ valueFields }의 분포", xAndY: "${ x } 및 ${ y }" }, i = { barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "산점도" }, a = {
-  axisLabels: e,
-  titleLabels: g,
-  chartType: i
+v4.33.0-next.138 */
+const t = "차트를 불러오는 동안 오류가 발생했습니다.", a = "로그 변환을 음수 값 또는 0 값에 적용할 수 없습니다.", e = "제곱근 변환을 음수 값에 적용할 수 없습니다.", o = "레이어를 불러오는 동안 오류가 발생했습니다. URL = ${ url }. 포털 항목 ID = ${ portalItemId }.", s = "구성에 정의된 필드 [${ fieldNames }]를 레이어에서 찾을 수 없습니다.", n = "${ dataPath }은(는) 고유해야 합니다. ${ seriesName }(이)라는 계열에 다른 계열에서 이미 사용된 ID(${ seriesID })가 있습니다.", r = "${ dataPath }은(는) 숫자가 아닌 필드에서 불가산 집계를 수행할 수 없습니다.", i = "${ dataPath }에 ${ missingProperty } 등록정보가 누락되었습니다.", d = "${ dataPath }은(는) ${ limit }자보다 짧으면 안 됩니다.", c = "${ dataPath }에는 ${ limit }개 이상의 항목이 있어야 합니다.", l = "${ dataPath }에는 ${ limit }개 이하의 항목이 있어야 합니다.", $ = "${ dataPath }은(는) 공백 이외의 문자를 1개 이상 포함해야 합니다.", u = "${ dataPath }에는 ${ additionalProperty }이(가) 없어야 합니다.", m = "${ dataPath }은(는) 허용된 값(${ allowedValues }) 중 하나와 같아야 합니다.", p = "${ dataPath }은(는) ${ schemaOptions } 중 하나의 스키마와 일치해야 합니다.", h = "비례 심볼이 있는 산점도는 지원되지 않습니다. 기본 심볼 크기가 적용되었습니다.", P = "입력 데이터를 읽지 못했습니다.", y = "The queryBins operation is not supported on this service.", I = "인덱스 ${ seriesIndex }에 예상되는 시리즈 유형은 '${ expectedType }'인데 '${ receivedType }'이(가) 대신 수신되었습니다.", g = "또는", f = {
+  defaultError: t,
+  negativeValueInDataForLogTransformation: a,
+  negativeValueInDataForSqrtTransformation: e,
+  layerLoadFailure: o,
+  layerFieldsNotFound: s,
+  duplicateSeriesID: n,
+  nonNumericAggregation: r,
+  requiredProperty: i,
+  minLength: d,
+  minItems: c,
+  maxItems: l,
+  whiteSpacePattern: $,
+  additionalProperty: u,
+  enumValues: m,
+  anyOfValues: p,
+  bubbleChartValidateMsg: h,
+  queryError: P,
+  queryBinsNotSupported: y,
+  invalidSeriesType: I,
+  or: g
 };
 export {
-  e as axisLabels,
-  i as chartType,
-  a as default,
-  g as titleLabels
+  u as additionalProperty,
+  p as anyOfValues,
+  h as bubbleChartValidateMsg,
+  f as default,
+  t as defaultError,
+  n as duplicateSeriesID,
+  m as enumValues,
+  I as invalidSeriesType,
+  s as layerFieldsNotFound,
+  o as layerLoadFailure,
+  l as maxItems,
+  c as minItems,
+  d as minLength,
+  a as negativeValueInDataForLogTransformation,
+  e as negativeValueInDataForSqrtTransformation,
+  r as nonNumericAggregation,
+  g as or,
+  y as queryBinsNotSupported,
+  P as queryError,
+  i as requiredProperty,
+  $ as whiteSpacePattern
 };

package/dist/chunks/messages.ko2.js

@@ -1,46 +1,22 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const t = "차트를 불러오는 동안 오류가 발생했습니다.", a = "로그 변환을 음수 값 또는 0 값에 적용할 수 없습니다.", e = "제곱근 변환을 음수 값에 적용할 수 없습니다.", o = "레이어를 불러오는 동안 오류가 발생했습니다. URL = ${ url }. 포털 항목 ID = ${ portalItemId }.", s = "구성에 정의된 필드 [${ fieldNames }]를 레이어에서 찾을 수 없습니다.", n = "${ dataPath }은(는) 고유해야 합니다. ${ seriesName }(이)라는 계열에 다른 계열에서 이미 사용된 ID(${ seriesID })가 있습니다.", r = "${ dataPath }은(는) 숫자가 아닌 필드에서 불가산 집계를 수행할 수 없습니다.", i = "${ dataPath }에 ${ missingProperty } 등록정보가 누락되었습니다.", d = "${ dataPath }은(는) ${ limit }자보다 짧으면 안 됩니다.", c = "${ dataPath }에는 ${ limit }개 이상의 항목이 있어야 합니다.", l = "${ dataPath }에는 ${ limit }개 이하의 항목이 있어야 합니다.", $ = "${ dataPath }은(는) 공백 이외의 문자를 1개 이상 포함해야 합니다.", m = "${ dataPath }에는 ${ additionalProperty }이(가) 없어야 합니다.", u = "${ dataPath }은(는) 허용된 값(${ allowedValues }) 중 하나와 같아야 합니다.", P = "${ dataPath }은(는) ${ schemaOptions } 중 하나의 스키마와 일치해야 합니다.", h = "비례 심볼이 있는 산점도는 지원되지 않습니다. 기본 심볼 크기가 적용되었습니다.", p = "입력 데이터를 읽지 못했습니다.", y = "인덱스 ${ seriesIndex }에 예상되는 시리즈 유형은 '${ expectedType }'인데 '${ receivedType }'이(가) 대신 수신되었습니다.", I = "또는", g = {
-  defaultError: t,
-  negativeValueInDataForLogTransformation: a,
-  negativeValueInDataForSqrtTransformation: e,
-  layerLoadFailure: o,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: i,
-  minLength: d,
-  minItems: c,
-  maxItems: l,
-  whiteSpacePattern: $,
-  additionalProperty: m,
-  enumValues: u,
-  anyOfValues: P,
-  bubbleChartValidateMsg: h,
-  queryError: p,
-  invalidSeriesType: y,
-  or: I
+v4.33.0-next.138 */
+const t = { chart: "차트", barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "산점도", boxPlot: "박스 플롯" }, e = { mean: "평균", median: "중앙값", sum: "합계", discretePercentile: "불연속 백분위수", minimum: "최소", maximum: "최대", variance: "변수", count: "개수", aggregation: "${ statistics }개 중 ${ fieldName }개", noAggregation: "집계 없음" }, a = "차트", s = "시리즈 개수", i = "X축", n = "사용할 수 없음", o = { start: "첫 번째 데이터 포인트로 스냅", end: "마지막 데이터 포인트로 스냅" }, c = {
+  chartType: t,
+  statistics: e,
+  defaultTitle: a,
+  countSeries: s,
+  xAxis: i,
+  notAvailable: n,
+  timeAggregationTypes: o
 };
 export {
-  m as additionalProperty,
-  P as anyOfValues,
-  h as bubbleChartValidateMsg,
-  g as default,
-  t as defaultError,
-  n as duplicateSeriesID,
-  u as enumValues,
-  y as invalidSeriesType,
-  s as layerFieldsNotFound,
-  o as layerLoadFailure,
-  l as maxItems,
-  c as minItems,
-  d as minLength,
-  a as negativeValueInDataForLogTransformation,
-  e as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  I as or,
-  p as queryError,
-  i as requiredProperty,
-  $ as whiteSpacePattern
+  t as chartType,
+  s as countSeries,
+  c as default,
+  a as defaultTitle,
+  n as notAvailable,
+  e as statistics,
+  o as timeAggregationTypes,
+  i as xAxis
 };

package/dist/chunks/messages.ko3.js

@@ -1,22 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const t = { chart: "차트", barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "산점도", boxPlot: "박스 플롯" }, e = { mean: "평균", median: "중앙값", sum: "합계", discretePercentile: "불연속 백분위수", minimum: "최소", maximum: "최대", variance: "변수", count: "개수", aggregation: "${ statistics }개 중 ${ fieldName }개", noAggregation: "집계 없음" }, a = "차트", s = "시리즈 개수", i = "X축", n = "사용할 수 없음", o = { start: "첫 번째 데이터 포인트로 스냅", end: "마지막 데이터 포인트로 스냅" }, c = {
-  chartType: t,
-  statistics: e,
-  defaultTitle: a,
-  countSeries: s,
-  xAxis: i,
-  notAvailable: n,
-  timeAggregationTypes: o
+v4.33.0-next.138 */
+const _ = "한_Play_________빠", e = "한_Stop_________빠", o = "한_Legend_____________빠", r = "한_Loading_______________빠", t = "한_Home_________빠", s = "한_Chart___________빠", a = "한_Series_____________빠", n = "한_Export_____________빠", i = "한_Image___________빠", l = "한_Data_________빠", d = "한_Print___________빠", c = {
+  "Zoom Out": "한_Zoom Out_________________빠",
+  Play: _,
+  Stop: e,
+  Legend: o,
+  "Press ENTER to toggle": "한_Press ENTER to toggle______________________빠",
+  Loading: r,
+  Home: t,
+  Chart: s,
+  "Serial chart": "한_Serial chart_____________빠",
+  "X/Y chart": "한_X/Y chart___________________빠",
+  "Pie chart": "한_Pie chart___________________빠",
+  "Gauge chart": "한_Gauge chart____________빠",
+  "Radar chart": "한_Radar chart____________빠",
+  "Sankey diagram": "한_Sankey diagram_______________빠",
+  "Flow diagram": "한_Flow diagram_____________빠",
+  "Chord diagram": "한_Chord diagram______________빠",
+  "TreeMap chart": "한_TreeMap chart______________빠",
+  "Sliced chart": "한_Sliced chart_____________빠",
+  Series: a,
+  "Candlestick Series": "한_Candlestick Series___________________빠",
+  "OHLC Series": "한_OHLC Series____________빠",
+  "Column Series": "한_Column Series______________빠",
+  "Line Series": "한_Line Series____________빠",
+  "Pie Slice Series": "한_Pie Slice Series_________________빠",
+  "Funnel Series": "한_Funnel Series______________빠",
+  "Pyramid Series": "한_Pyramid Series_______________빠",
+  "X/Y Series": "한_X/Y Series_____________________빠",
+  Map: "한_Map_______빠",
+  "Press ENTER to zoom in": "한_Press ENTER to zoom in_______________________빠",
+  "Press ENTER to zoom out": "한_Press ENTER to zoom out________________________빠",
+  "Use arrow keys to zoom in and out": "한_Use arrow keys to zoom in and out__________________빠",
+  "Use plus and minus keys on your keyboard to zoom in and out": "한_Use plus and minus keys on your keyboard to zoom in and out_______________________________빠",
+  Export: n,
+  Image: i,
+  Data: l,
+  Print: d,
+  "Press ENTER to open": "한_Press ENTER to open____________________빠",
+  "Press ENTER to print.": "한_Press ENTER to print______________________빠.",
+  "Press ENTER to export as %1.": "한_Press ENTER to export as %1_____________________________빠.",
+  "(Press ESC to close this message)": "한_(Press ESC to close this message)__________________빠",
+  "Image Export Complete": "한_Image Export Complete______________________빠",
+  "Export operation took longer than expected. Something might have gone wrong.": "한_Export operation took longer than expected. Something might have gone wrong_______________________________________빠.",
+  "Saved from": "한_Saved from_____________________빠",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "한_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________빠",
+  "Use left and right arrows to move selection": "한_Use left and right arrows to move selection_______________________빠",
+  "Use left and right arrows to move left selection": "한_Use left and right arrows to move left selection_________________________빠",
+  "Use left and right arrows to move right selection": "한_Use left and right arrows to move right selection__________________________빠",
+  "Use TAB select grip buttons or up and down arrows to change selection": "한_Use TAB select grip buttons or up and down arrows to change selection____________________________________빠",
+  "Use up and down arrows to move selection": "한_Use up and down arrows to move selection_____________________빠",
+  "Use up and down arrows to move lower selection": "한_Use up and down arrows to move lower selection________________________빠",
+  "Use up and down arrows to move upper selection": "한_Use up and down arrows to move upper selection________________________빠",
+  "From %1 to %2": "한_From %1 to %2______________빠",
+  "From %1": "한_From %1_______________빠",
+  "To %1": "한_To %1___________빠",
+  "No parser available for file: %1": "한_No parser available for file: %1_________________빠",
+  "Error parsing file: %1": "한_Error parsing file: %1_______________________빠",
+  "Unable to load file: %1": "한_Unable to load file: %1________________________빠",
+  "Invalid date": "한_Invalid date_____________빠"
 };
 export {
-  t as chartType,
-  s as countSeries,
-  c as default,
-  a as defaultTitle,
-  n as notAvailable,
-  e as statistics,
-  o as timeAggregationTypes,
-  i as xAxis
+  s as Chart,
+  l as Data,
+  n as Export,
+  t as Home,
+  i as Image,
+  o as Legend,
+  r as Loading,
+  _ as Play,
+  d as Print,
+  a as Series,
+  e as Stop,
+  c as default
 };

package/dist/chunks/messages.ko4.js

@@ -1,77 +1,14 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const _ = "한_Play_________빠", e = "한_Stop_________빠", o = "한_Legend_____________빠", r = "한_Loading_______________빠", t = "한_Home_________빠", s = "한_Chart___________빠", a = "한_Series_____________빠", n = "한_Export_____________빠", i = "한_Image___________빠", l = "한_Data_________빠", d = "한_Print___________빠", c = {
-  "Zoom Out": "한_Zoom Out_________________빠",
-  Play: _,
-  Stop: e,
-  Legend: o,
-  "Press ENTER to toggle": "한_Press ENTER to toggle______________________빠",
-  Loading: r,
-  Home: t,
-  Chart: s,
-  "Serial chart": "한_Serial chart_____________빠",
-  "X/Y chart": "한_X/Y chart___________________빠",
-  "Pie chart": "한_Pie chart___________________빠",
-  "Gauge chart": "한_Gauge chart____________빠",
-  "Radar chart": "한_Radar chart____________빠",
-  "Sankey diagram": "한_Sankey diagram_______________빠",
-  "Flow diagram": "한_Flow diagram_____________빠",
-  "Chord diagram": "한_Chord diagram______________빠",
-  "TreeMap chart": "한_TreeMap chart______________빠",
-  "Sliced chart": "한_Sliced chart_____________빠",
-  Series: a,
-  "Candlestick Series": "한_Candlestick Series___________________빠",
-  "OHLC Series": "한_OHLC Series____________빠",
-  "Column Series": "한_Column Series______________빠",
-  "Line Series": "한_Line Series____________빠",
-  "Pie Slice Series": "한_Pie Slice Series_________________빠",
-  "Funnel Series": "한_Funnel Series______________빠",
-  "Pyramid Series": "한_Pyramid Series_______________빠",
-  "X/Y Series": "한_X/Y Series_____________________빠",
-  Map: "한_Map_______빠",
-  "Press ENTER to zoom in": "한_Press ENTER to zoom in_______________________빠",
-  "Press ENTER to zoom out": "한_Press ENTER to zoom out________________________빠",
-  "Use arrow keys to zoom in and out": "한_Use arrow keys to zoom in and out__________________빠",
-  "Use plus and minus keys on your keyboard to zoom in and out": "한_Use plus and minus keys on your keyboard to zoom in and out_______________________________빠",
-  Export: n,
-  Image: i,
-  Data: l,
-  Print: d,
-  "Press ENTER to open": "한_Press ENTER to open____________________빠",
-  "Press ENTER to print.": "한_Press ENTER to print______________________빠.",
-  "Press ENTER to export as %1.": "한_Press ENTER to export as %1_____________________________빠.",
-  "(Press ESC to close this message)": "한_(Press ESC to close this message)__________________빠",
-  "Image Export Complete": "한_Image Export Complete______________________빠",
-  "Export operation took longer than expected. Something might have gone wrong.": "한_Export operation took longer than expected. Something might have gone wrong_______________________________________빠.",
-  "Saved from": "한_Saved from_____________________빠",
-  "Use TAB to select grip buttons or left and right arrows to change selection": "한_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________빠",
-  "Use left and right arrows to move selection": "한_Use left and right arrows to move selection_______________________빠",
-  "Use left and right arrows to move left selection": "한_Use left and right arrows to move left selection_________________________빠",
-  "Use left and right arrows to move right selection": "한_Use left and right arrows to move right selection__________________________빠",
-  "Use TAB select grip buttons or up and down arrows to change selection": "한_Use TAB select grip buttons or up and down arrows to change selection____________________________________빠",
-  "Use up and down arrows to move selection": "한_Use up and down arrows to move selection_____________________빠",
-  "Use up and down arrows to move lower selection": "한_Use up and down arrows to move lower selection________________________빠",
-  "Use up and down arrows to move upper selection": "한_Use up and down arrows to move upper selection________________________빠",
-  "From %1 to %2": "한_From %1 to %2______________빠",
-  "From %1": "한_From %1_______________빠",
-  "To %1": "한_To %1___________빠",
-  "No parser available for file: %1": "한_No parser available for file: %1_________________빠",
-  "Error parsing file: %1": "한_Error parsing file: %1_______________________빠",
-  "Unable to load file: %1": "한_Unable to load file: %1________________________빠",
-  "Invalid date": "한_Invalid date_____________빠"
+v4.33.0-next.138 */
+const e = { percent: "백분율", values: "값", standardizedValues: "표준화된 값", count: "개수", aggregationOfValues: "값의 ${ aggregation }", aggregationOfFieldName: "${ aggregation }개 중 ${ fieldName }개" }, g = { aggrFieldsByCategory: "${ aggregationFields } 작성자 ${ category }", aggrTypeCategory: "${ aggregationType } 작성자 ${ category }", aggrTypeCategoryBySplitBy: "${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFields: "${ aggregationType } / ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationField }, ${ category }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByCategory: "${ aggregationFields }, ${ category } 기준 ${ aggregationType }", aggrFieldsByXAxisField: "${ aggregationFields } 작성자 ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType } 작성자 ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationField }, ${ xAxisField }, ${ splitByField } 기준 ${ aggregationType }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationFields }, ${ xAxisField } 기준 ${ aggregationType }", distributionOfField: "${ valueField }의 분산", distributionOfFields: "${ valueFields }의 분포", distributionOfFieldsByCategory: "${ category } 기준 ${ valueFields }의 분포", distributionOfFieldsByCategoryAndSplitBy: "${ category } 및 ${ splitByField } 기준 ${ valueFields }의 분포", xAndY: "${ x } 및 ${ y }" }, i = { barChart: "막대형 차트", lineChart: "선형 차트", pieChart: "파이 차트", histogram: "히스토그램", scatterplot: "산점도" }, a = {
+  axisLabels: e,
+  titleLabels: g,
+  chartType: i
 };
 export {
-  s as Chart,
-  l as Data,
-  n as Export,
-  t as Home,
-  i as Image,
-  o as Legend,
-  r as Loading,
-  _ as Play,
-  d as Print,
-  a as Series,
-  e as Stop,
-  c as default
+  e as axisLabels,
+  i as chartType,
+  a as default,
+  g as titleLabels
 };

package/dist/chunks/messages.lt.js

@@ -1,14 +1,48 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const i = { percent: "Procentai", values: "Reikšmės", standardizedValues: "Standartizuotos reikšmės", count: "Bendras skaičius", aggregationOfValues: "${ aggregation } reikšmių", aggregationOfFieldName: "${ aggregation } iš ${ fieldName }" }, a = { aggrFieldsByCategory: "${ aggregationFields }, sukūrė ${ category }", aggrTypeCategory: "${ aggregationType }, sukūrė ${ category }", aggrTypeCategoryBySplitBy: "${ aggregationType } - ${ category } - ${ splitByField }", aggrTypeOfAggrFields: "${ aggregationType } iš ${ aggregationFields }", aggrTypeOfAggrFieldByCategoryBySplitByField: "${ aggregationType }, priklausantis ${ aggregationField } - ${ category } - ${ splitByField }", aggrTypeOfAggrFieldsByCategory: "${ aggregationType }, priklausantis ${ aggregationFields } - ${ category }", aggrFieldsByXAxisField: "${ aggregationFields }, sukūrė ${ xAxisField }", aggrTypeXAxisField: "${ aggregationType }, sukūrė ${ xAxisField }", aggrTypeXAxisFieldBySplitBy: "${ aggregationType } - ${ xAxisField } - ${ splitByField }", aggrTypeOfAggrFieldByXAxisFieldBySplitByField: "${ aggregationType }, priklausantis ${ aggregationField } - ${ xAxisField } - ${ splitByField }", aggrTypeOfAggrFieldsByXAxisField: "${ aggregationType }, priklausantis ${ aggregationFields } - ${ xAxisField }", distributionOfField: "${ valueField } paskirstymas", distributionOfFields: "${ valueFields } paskirstymas", distributionOfFieldsByCategory: "${ valueFields } paskirstymas pagal ${ category }", distributionOfFieldsByCategoryAndSplitBy: "${ valueFields } paskirstymas pagal ${ category } ir ${ splitByField }", xAndY: "${ x } ir ${ y }" }, e = { barChart: "Stulpelinė diagrama", lineChart: "Linijinė diagrama", pieChart: "Skritulinė diagrama", histogram: "Histograma", scatterplot: "Sklaidos diagrama" }, g = {
-  axisLabels: i,
-  titleLabels: a,
-  chartType: e
+v4.33.0-next.138 */
+const a = "Įkeliant diagramą įvyko klaida.", i = "Negalima pritaikyti log. transformacijos neigiamoms arba nulinėms reikšmėms.", t = "Negalima pritaikyti kvadratinės šaknies transformacijos neigiamoms reikšmėms.", e = "Įkeliant sluoksnį įvyko klaida. URL = ${ url }. Portalo elemento ID = ${ portalItemId }.", s = "Sluoksnyje nepavyko rasti konfigūracijoje apibrėžtų laukų [${ fieldNames }].", n = "${ dataPath } turi būti unikalus. Serijos, kurios pavadinimas ${ seriesName }, ID (${ seriesID }) jau naudojamas kitai serijai.", o = "${ dataPath } negali atikti neskaičiavimo agregavimo ne skaičių lauke.", r = "${ dataPath } trūksta savybės pavadinimu ${ missingProperty }.", u = "${ dataPath } negali būti trumpesnis negu ${ limit } simb.", l = "${ dataPath } negali turėti mažiau negu ${ limit } elementų.", m = "${ dataPath } negali turėti daugiau negu ${ limit } elementų.", d = "${ dataPath } turi sudaryti bent vienas simbolis, kuris nėra tarpas.", c = "${ dataPath } negali sudaryti ${ additionalProperty }.", k = "${ dataPath } turi būti lygus vienai iš šių leidžiamų reikšmių: ${ allowedValues }.", p = "${ dataPath } turi sutapti su viena iš šių schemų: ${ schemaOptions }.", g = "Sklaidos diagramos su proporciniais simboliais nėra palaikomos. Pritaikytas numatytasis simbolių dydis.", y = "Nepavyko nuskaityti įvesties duomenų.", $ = "The queryBins operation is not supported on this service.", v = "Numatytas serijos tipas indeksui ${ seriesIndex } yra ${ expectedType }, bet vietoj to gauta ${ receivedType }", h = "arba", P = {
+  defaultError: a,
+  negativeValueInDataForLogTransformation: i,
+  negativeValueInDataForSqrtTransformation: t,
+  layerLoadFailure: e,
+  layerFieldsNotFound: s,
+  duplicateSeriesID: n,
+  nonNumericAggregation: o,
+  requiredProperty: r,
+  minLength: u,
+  minItems: l,
+  maxItems: m,
+  whiteSpacePattern: d,
+  additionalProperty: c,
+  enumValues: k,
+  anyOfValues: p,
+  bubbleChartValidateMsg: g,
+  queryError: y,
+  queryBinsNotSupported: $,
+  invalidSeriesType: v,
+  or: h
 };
 export {
-  i as axisLabels,
-  e as chartType,
-  g as default,
-  a as titleLabels
+  c as additionalProperty,
+  p as anyOfValues,
+  g as bubbleChartValidateMsg,
+  P as default,
+  a as defaultError,
+  n as duplicateSeriesID,
+  k as enumValues,
+  v as invalidSeriesType,
+  s as layerFieldsNotFound,
+  e as layerLoadFailure,
+  m as maxItems,
+  l as minItems,
+  u as minLength,
+  i as negativeValueInDataForLogTransformation,
+  t as negativeValueInDataForSqrtTransformation,
+  o as nonNumericAggregation,
+  h as or,
+  $ as queryBinsNotSupported,
+  y as queryError,
+  r as requiredProperty,
+  d as whiteSpacePattern
 };

package/dist/chunks/messages.lt2.js

@@ -1,46 +1,22 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const a = "Įkeliant diagramą įvyko klaida.", i = "Negalima pritaikyti log. transformacijos neigiamoms arba nulinėms reikšmėms.", t = "Negalima pritaikyti kvadratinės šaknies transformacijos neigiamoms reikšmėms.", e = "Įkeliant sluoksnį įvyko klaida. URL = ${ url }. Portalo elemento ID = ${ portalItemId }.", s = "Sluoksnyje nepavyko rasti konfigūracijoje apibrėžtų laukų [${ fieldNames }].", n = "${ dataPath } turi būti unikalus. Serijos, kurios pavadinimas ${ seriesName }, ID (${ seriesID }) jau naudojamas kitai serijai.", r = "${ dataPath } negali atikti neskaičiavimo agregavimo ne skaičių lauke.", o = "${ dataPath } trūksta savybės pavadinimu ${ missingProperty }.", l = "${ dataPath } negali būti trumpesnis negu ${ limit } simb.", m = "${ dataPath } negali turėti mažiau negu ${ limit } elementų.", u = "${ dataPath } negali turėti daugiau negu ${ limit } elementų.", d = "${ dataPath } turi sudaryti bent vienas simbolis, kuris nėra tarpas.", k = "${ dataPath } negali sudaryti ${ additionalProperty }.", c = "${ dataPath } turi būti lygus vienai iš šių leidžiamų reikšmių: ${ allowedValues }.", g = "${ dataPath } turi sutapti su viena iš šių schemų: ${ schemaOptions }.", y = "Sklaidos diagramos su proporciniais simboliais nėra palaikomos. Pritaikytas numatytasis simbolių dydis.", p = "Nepavyko nuskaityti įvesties duomenų.", $ = "Numatytas serijos tipas indeksui ${ seriesIndex } yra ${ expectedType }, bet vietoj to gauta ${ receivedType }", v = "arba", P = {
-  defaultError: a,
-  negativeValueInDataForLogTransformation: i,
-  negativeValueInDataForSqrtTransformation: t,
-  layerLoadFailure: e,
-  layerFieldsNotFound: s,
-  duplicateSeriesID: n,
-  nonNumericAggregation: r,
-  requiredProperty: o,
-  minLength: l,
-  minItems: m,
-  maxItems: u,
-  whiteSpacePattern: d,
-  additionalProperty: k,
-  enumValues: c,
-  anyOfValues: g,
-  bubbleChartValidateMsg: y,
-  queryError: p,
-  invalidSeriesType: $,
-  or: v
+v4.33.0-next.138 */
+const a = { chart: "Diagrama", barChart: "Stulpelinė diagrama", lineChart: "Linijinė diagrama", pieChart: "Skritulinė diagrama", histogram: "Histograma", scatterplot: "Sklaidos diagrama", boxPlot: "Stačiakampė diagrama" }, i = { mean: "Vidurkis", median: "Mediana", sum: "Suma", discretePercentile: "Diskretinis procentilis", minimum: "Minimumas", maximum: "Maksimumas", variance: "Nuokrypis", count: "Bendras skaičius", aggregation: "${ statistics } iš ${ fieldName }", noAggregation: "Be agregavimo" }, t = "Diagrama", s = "Skaičių serija", e = "X ašis", r = "Negalima", n = { start: "Pritraukti pirmą duomenų tašką", end: "Pritraukti paskutinį duomenų tašką" }, m = {
+  chartType: a,
+  statistics: i,
+  defaultTitle: t,
+  countSeries: s,
+  xAxis: e,
+  notAvailable: r,
+  timeAggregationTypes: n
 };
 export {
-  k as additionalProperty,
-  g as anyOfValues,
-  y as bubbleChartValidateMsg,
-  P as default,
-  a as defaultError,
-  n as duplicateSeriesID,
-  c as enumValues,
-  $ as invalidSeriesType,
-  s as layerFieldsNotFound,
-  e as layerLoadFailure,
-  u as maxItems,
-  m as minItems,
-  l as minLength,
-  i as negativeValueInDataForLogTransformation,
-  t as negativeValueInDataForSqrtTransformation,
-  r as nonNumericAggregation,
-  v as or,
-  p as queryError,
-  o as requiredProperty,
-  d as whiteSpacePattern
+  a as chartType,
+  s as countSeries,
+  m as default,
+  t as defaultTitle,
+  r as notAvailable,
+  i as statistics,
+  n as timeAggregationTypes,
+  e as xAxis
 };

package/dist/chunks/messages.lt3.js

@@ -1,22 +1,77 @@
 /*! All material copyright Esri, All Rights Reserved, unless otherwise specified.
 See https://js.arcgis.com/4.33/esri/copyright.txt for details.
-v4.33.0-next.137 */
-const a = { chart: "Diagrama", barChart: "Stulpelinė diagrama", lineChart: "Linijinė diagrama", pieChart: "Skritulinė diagrama", histogram: "Histograma", scatterplot: "Sklaidos diagrama", boxPlot: "Stačiakampė diagrama" }, i = { mean: "Vidurkis", median: "Mediana", sum: "Suma", discretePercentile: "Diskretinis procentilis", minimum: "Minimumas", maximum: "Maksimumas", variance: "Nuokrypis", count: "Bendras skaičius", aggregation: "${ statistics } iš ${ fieldName }", noAggregation: "Be agregavimo" }, t = "Diagrama", s = "Skaičių serija", e = "X ašis", r = "Negalima", n = { start: "Pritraukti pirmą duomenų tašką", end: "Pritraukti paskutinį duomenų tašką" }, m = {
-  chartType: a,
-  statistics: i,
-  defaultTitle: t,
-  countSeries: s,
-  xAxis: e,
-  notAvailable: r,
-  timeAggregationTypes: n
+v4.33.0-next.138 */
+const _ = "Į_Play_________š", e = "Į_Stop_________š", o = "Į_Legend_____________š", r = "Į_Loading_______________š", t = "Į_Home_________š", s = "Į_Chart___________š", a = "Į_Series_____________š", n = "Į_Export_____________š", i = "Į_Image___________š", l = "Į_Data_________š", d = "Į_Print___________š", c = {
+  "Zoom Out": "Į_Zoom Out_________________š",
+  Play: _,
+  Stop: e,
+  Legend: o,
+  "Press ENTER to toggle": "Į_Press ENTER to toggle______________________š",
+  Loading: r,
+  Home: t,
+  Chart: s,
+  "Serial chart": "Į_Serial chart_____________š",
+  "X/Y chart": "Į_X/Y chart___________________š",
+  "Pie chart": "Į_Pie chart___________________š",
+  "Gauge chart": "Į_Gauge chart____________š",
+  "Radar chart": "Į_Radar chart____________š",
+  "Sankey diagram": "Į_Sankey diagram_______________š",
+  "Flow diagram": "Į_Flow diagram_____________š",
+  "Chord diagram": "Į_Chord diagram______________š",
+  "TreeMap chart": "Į_TreeMap chart______________š",
+  "Sliced chart": "Į_Sliced chart_____________š",
+  Series: a,
+  "Candlestick Series": "Į_Candlestick Series___________________š",
+  "OHLC Series": "Į_OHLC Series____________š",
+  "Column Series": "Į_Column Series______________š",
+  "Line Series": "Į_Line Series____________š",
+  "Pie Slice Series": "Į_Pie Slice Series_________________š",
+  "Funnel Series": "Į_Funnel Series______________š",
+  "Pyramid Series": "Į_Pyramid Series_______________š",
+  "X/Y Series": "Į_X/Y Series_____________________š",
+  Map: "Į_Map_______š",
+  "Press ENTER to zoom in": "Į_Press ENTER to zoom in_______________________š",
+  "Press ENTER to zoom out": "Į_Press ENTER to zoom out________________________š",
+  "Use arrow keys to zoom in and out": "Į_Use arrow keys to zoom in and out__________________š",
+  "Use plus and minus keys on your keyboard to zoom in and out": "Į_Use plus and minus keys on your keyboard to zoom in and out_______________________________š",
+  Export: n,
+  Image: i,
+  Data: l,
+  Print: d,
+  "Press ENTER to open": "Į_Press ENTER to open____________________š",
+  "Press ENTER to print.": "Į_Press ENTER to print______________________š.",
+  "Press ENTER to export as %1.": "Į_Press ENTER to export as %1_____________________________š.",
+  "(Press ESC to close this message)": "Į_(Press ESC to close this message)__________________š",
+  "Image Export Complete": "Į_Image Export Complete______________________š",
+  "Export operation took longer than expected. Something might have gone wrong.": "Į_Export operation took longer than expected. Something might have gone wrong_______________________________________š.",
+  "Saved from": "Į_Saved from_____________________š",
+  "Use TAB to select grip buttons or left and right arrows to change selection": "Į_Use TAB to select grip buttons or left and right arrows to change selection_______________________________________š",
+  "Use left and right arrows to move selection": "Į_Use left and right arrows to move selection_______________________š",
+  "Use left and right arrows to move left selection": "Į_Use left and right arrows to move left selection_________________________š",
+  "Use left and right arrows to move right selection": "Į_Use left and right arrows to move right selection__________________________š",
+  "Use TAB select grip buttons or up and down arrows to change selection": "Į_Use TAB select grip buttons or up and down arrows to change selection____________________________________š",
+  "Use up and down arrows to move selection": "Į_Use up and down arrows to move selection_____________________š",
+  "Use up and down arrows to move lower selection": "Į_Use up and down arrows to move lower selection________________________š",
+  "Use up and down arrows to move upper selection": "Į_Use up and down arrows to move upper selection________________________š",
+  "From %1 to %2": "Į_From %1 to %2______________š",
+  "From %1": "Į_From %1_______________š",
+  "To %1": "Į_To %1___________š",
+  "No parser available for file: %1": "Į_No parser available for file: %1_________________š",
+  "Error parsing file: %1": "Į_Error parsing file: %1_______________________š",
+  "Unable to load file: %1": "Į_Unable to load file: %1________________________š",
+  "Invalid date": "Į_Invalid date_____________š"
 };
 export {
-  a as chartType,
-  s as countSeries,
-  m as default,
-  t as defaultTitle,
-  r as notAvailable,
-  i as statistics,
-  n as timeAggregationTypes,
-  e as xAxis
+  s as Chart,
+  l as Data,
+  n as Export,
+  t as Home,
+  i as Image,
+  o as Legend,
+  r as Loading,
+  _ as Play,
+  d as Print,
+  a as Series,
+  e as Stop,
+  c as default
 };