@andespindola/crow-term-linux-x64 0.0.0-bootstrap.1 → 0.1.0-alpha.5

package/bin/shell/vendor/zsh-syntax-highlighting/highlighters/main/main-highlighter.zsh

@@ -0,0 +1,1853 @@
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2010-2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+
+# Define default styles.
+: ${ZSH_HIGHLIGHT_STYLES[default]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[unknown-token]:=fg=red,bold}
+: ${ZSH_HIGHLIGHT_STYLES[reserved-word]:=fg=yellow}
+: ${ZSH_HIGHLIGHT_STYLES[suffix-alias]:=fg=green,underline}
+: ${ZSH_HIGHLIGHT_STYLES[global-alias]:=fg=cyan}
+: ${ZSH_HIGHLIGHT_STYLES[precommand]:=fg=green,underline}
+: ${ZSH_HIGHLIGHT_STYLES[commandseparator]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[autodirectory]:=fg=green,underline}
+: ${ZSH_HIGHLIGHT_STYLES[path]:=underline}
+: ${ZSH_HIGHLIGHT_STYLES[path_pathseparator]:=}
+: ${ZSH_HIGHLIGHT_STYLES[path_prefix_pathseparator]:=}
+: ${ZSH_HIGHLIGHT_STYLES[globbing]:=fg=blue}
+: ${ZSH_HIGHLIGHT_STYLES[history-expansion]:=fg=blue}
+: ${ZSH_HIGHLIGHT_STYLES[command-substitution]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[command-substitution-delimiter]:=fg=magenta}
+: ${ZSH_HIGHLIGHT_STYLES[process-substitution]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[process-substitution-delimiter]:=fg=magenta}
+: ${ZSH_HIGHLIGHT_STYLES[single-hyphen-option]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[double-hyphen-option]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[back-quoted-argument]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[back-quoted-argument-delimiter]:=fg=magenta}
+: ${ZSH_HIGHLIGHT_STYLES[single-quoted-argument]:=fg=yellow}
+: ${ZSH_HIGHLIGHT_STYLES[double-quoted-argument]:=fg=yellow}
+: ${ZSH_HIGHLIGHT_STYLES[dollar-quoted-argument]:=fg=yellow}
+: ${ZSH_HIGHLIGHT_STYLES[rc-quote]:=fg=cyan}
+: ${ZSH_HIGHLIGHT_STYLES[dollar-double-quoted-argument]:=fg=cyan}
+: ${ZSH_HIGHLIGHT_STYLES[back-double-quoted-argument]:=fg=cyan}
+: ${ZSH_HIGHLIGHT_STYLES[back-dollar-quoted-argument]:=fg=cyan}
+: ${ZSH_HIGHLIGHT_STYLES[assign]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[redirection]:=fg=yellow}
+: ${ZSH_HIGHLIGHT_STYLES[comment]:=fg=black,bold}
+: ${ZSH_HIGHLIGHT_STYLES[named-fd]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[numeric-fd]:=none}
+: ${ZSH_HIGHLIGHT_STYLES[arg0]:=fg=green}
+
+# Whether the highlighter should be called or not.
+_zsh_highlight_highlighter_main_predicate()
+{
+  # may need to remove path_prefix highlighting when the line ends
+  [[ $WIDGET == zle-line-finish ]] || _zsh_highlight_buffer_modified
+}
+
+# Helper to deal with tokens crossing line boundaries.
+_zsh_highlight_main_add_region_highlight() {
+  integer start=$1 end=$2
+  shift 2
+
+  if (( $#in_alias )); then
+    [[ $1 == unknown-token ]] && alias_style=unknown-token
+    return
+  fi
+  if (( in_param )); then
+    if [[ $1 == unknown-token ]]; then
+      param_style=unknown-token
+    fi
+    if [[ -n $param_style ]]; then
+      return
+    fi
+    param_style=$1
+    return
+  fi
+
+  # The calculation was relative to $buf but region_highlight is relative to $BUFFER.
+  (( start += buf_offset ))
+  (( end += buf_offset ))
+
+  list_highlights+=($start $end $1)
+}
+
+_zsh_highlight_main_add_many_region_highlights() {
+  for 1 2 3; do
+    _zsh_highlight_main_add_region_highlight $1 $2 $3
+  done
+}
+
+_zsh_highlight_main_calculate_fallback() {
+  local -A fallback_of; fallback_of=(
+      alias arg0
+      suffix-alias arg0
+      global-alias dollar-double-quoted-argument
+      builtin arg0
+      function arg0
+      command arg0
+      precommand arg0
+      hashed-command arg0
+      autodirectory arg0
+      arg0_\* arg0
+
+      # TODO: Maybe these? —
+      #   named-fd file-descriptor
+      #   numeric-fd file-descriptor
+
+      path_prefix path
+      # The path separator fallback won't ever be used, due to the optimisation
+      # in _zsh_highlight_main_highlighter_highlight_path_separators().
+      path_pathseparator path
+      path_prefix_pathseparator path_prefix
+
+      single-quoted-argument{-unclosed,}
+      double-quoted-argument{-unclosed,}
+      dollar-quoted-argument{-unclosed,}
+      back-quoted-argument{-unclosed,}
+
+      command-substitution{-quoted,,-unquoted,}
+      command-substitution-delimiter{-quoted,,-unquoted,}
+
+      command-substitution{-delimiter,}
+      process-substitution{-delimiter,}
+      back-quoted-argument{-delimiter,}
+  )
+  local needle=$1 value
+  reply=($1)
+  while [[ -n ${value::=$fallback_of[(k)$needle]} ]]; do
+    unset "fallback_of[$needle]" # paranoia against infinite loops
+    reply+=($value)
+    needle=$value
+  done
+}
+
+# Get the type of a command.
+#
+# Uses the zsh/parameter module if available to avoid forks, and a
+# wrapper around 'type -w' as fallback.
+#
+# If $2 is 0, do not consider aliases.
+#
+# The result will be stored in REPLY.
+_zsh_highlight_main__type() {
+  integer -r aliases_allowed=${2-1}
+  # We won't cache replies of anything that exists as an alias at all, to
+  # ensure the cached value is correct regardless of $aliases_allowed.
+  #
+  # ### We probably _should_ cache them in a cache that's keyed on the value of
+  # ### $aliases_allowed, on the assumption that aliases are the common case.
+  integer may_cache=1
+
+  # Cache lookup
+  if (( $+_zsh_highlight_main__command_type_cache )); then
+    REPLY=$_zsh_highlight_main__command_type_cache[(e)$1]
+    if [[ -n "$REPLY" ]]; then
+      return
+    fi
+  fi
+
+  # Main logic
+  if (( $#options_to_set )); then
+    setopt localoptions $options_to_set;
+  fi
+  unset REPLY
+  if zmodload -e zsh/parameter; then
+    if (( $+aliases[(e)$1] )); then
+      may_cache=0
+    fi
+    if (( ${+galiases[(e)$1]} )) && (( aliases_allowed )); then
+      REPLY='global alias'
+    elif (( $+aliases[(e)$1] )) && (( aliases_allowed )); then
+      REPLY=alias
+    elif [[ $1 == *.* && -n ${1%.*} ]] && (( $+saliases[(e)${1##*.}] )); then
+      REPLY='suffix alias'
+    elif (( $reswords[(Ie)$1] )); then
+      REPLY=reserved
+    elif (( $+functions[(e)$1] )); then
+      REPLY=function
+    elif (( $+builtins[(e)$1] )); then
+      REPLY=builtin
+    elif (( $+commands[(e)$1] )); then
+      REPLY=command
+    # None of the special hashes had a match, so fall back to 'type -w', for
+    # forward compatibility with future versions of zsh that may add new command
+    # types.
+    #
+    # zsh 5.2 and older have a bug whereby running 'type -w ./sudo' implicitly
+    # runs 'hash ./sudo=/usr/local/bin/./sudo' (assuming /usr/local/bin/sudo
+    # exists and is in $PATH).  Avoid triggering the bug, at the expense of
+    # falling through to the $() below, incurring a fork.  (Issue #354.)
+    #
+    # The first disjunct mimics the isrelative() C call from the zsh bug.
+    elif {  [[ $1 != */* ]] || is-at-least 5.3 } &&
+         # Add a subshell to avoid a zsh upstream bug; see issue #606.
+         # ### Remove the subshell when we stop supporting zsh 5.7.1 (I assume 5.8 will have the bugfix).
+         ! (builtin type -w -- "$1") >/dev/null 2>&1; then
+      REPLY=none
+    fi
+  fi
+  if ! (( $+REPLY )); then
+    # zsh/parameter not available or had no matches.
+    #
+    # Note that 'type -w' will run 'rehash' implicitly.
+    #
+    # We 'unalias' in a subshell, so the parent shell is not affected.
+    #
+    # The colon command is there just to avoid a command substitution that
+    # starts with an arithmetic expression [«((…))» as the first thing inside
+    # «$(…)»], which is area that has had some parsing bugs before 5.6
+    # (approximately).
+    REPLY="${$(:; (( aliases_allowed )) || unalias -- "$1" 2>/dev/null; LC_ALL=C builtin type -w -- "$1" 2>/dev/null)##*: }"
+    if [[ $REPLY == 'alias' ]]; then
+      may_cache=0
+    fi
+  fi
+
+  # Cache population
+  if (( may_cache )) && (( $+_zsh_highlight_main__command_type_cache )); then
+    _zsh_highlight_main__command_type_cache[(e)$1]=$REPLY
+  fi
+  [[ -n $REPLY ]]
+  return $?
+}
+
+# Checks whether $1 is something that can be run.
+#
+# Return 0 if runnable, 1 if not runnable, 2 if trouble.
+_zsh_highlight_main__is_runnable() {
+  if _zsh_highlight_main__type "$1"; then
+    [[ $REPLY != none ]]
+  else
+    return 2
+  fi
+}
+
+# Check whether the first argument is a redirection operator token.
+# Report result via the exit code.
+_zsh_highlight_main__is_redirection() {
+  # A redirection operator token:
+  # - starts with an optional single-digit number;
+  # - is one of the tokens listed in zshmisc(1)
+  # - however (z) normalizes ! to |
+  [[ ${1#[0-9]} == (\<|\<\>|(\>|\>\>)(|\|)|\<\<(|-)|\<\<\<|\<\&|\&\<|(\>|\>\>)\&(|\|)|\&(\>|\>\>)(|\||\!)) ]]
+}
+
+# Resolve alias.
+#
+# Takes a single argument.
+#
+# The result will be stored in REPLY.
+_zsh_highlight_main__resolve_alias() {
+  if zmodload -e zsh/parameter; then
+    REPLY=${aliases[$arg]}
+  else
+    REPLY="${"$(alias -- $arg)"#*=}"
+  fi
+}
+
+# Return true iff $1 is a global alias
+_zsh_highlight_main__is_global_alias() {
+  if zmodload -e zsh/parameter; then
+    (( ${+galiases[$arg]} ))
+  elif [[ $arg == '='* ]]; then
+    # avoid running into «alias -L '=foo'» erroring out with 'bad assignment'
+    return 1
+  else
+    alias -L -g -- "$1" >/dev/null
+  fi
+}
+
+# Check that the top of $braces_stack has the expected value.  If it does, set
+# the style according to $2; otherwise, set style=unknown-token.
+#
+# $1: character expected to be at the top of $braces_stack
+# $2: optional assignment to style it if matches
+# return value is 0 if there is a match else 1
+_zsh_highlight_main__stack_pop() {
+  if [[ $braces_stack[1] == $1 ]]; then
+    braces_stack=${braces_stack:1}
+    if (( $+2 )); then
+      style=$2
+    fi
+    return 0
+  else
+    style=unknown-token
+    return 1
+  fi
+}
+
+# Main syntax highlighting function.
+_zsh_highlight_highlighter_main_paint()
+{
+  setopt localoptions extendedglob
+
+  # At the PS3 prompt and in vared, highlight nothing.
+  #
+  # (We can't check this in _zsh_highlight_highlighter_main_predicate because
+  # if the predicate returns false, the previous value of region_highlight
+  # would be reused.)
+  if [[ $CONTEXT == (select|vared) ]]; then
+    return
+  fi
+
+  typeset -a ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR
+  typeset -a ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW
+  local -a options_to_set reply # used in callees
+  local REPLY
+
+  # $flags_with_argument is a set of letters, corresponding to the option letters
+  # that would be followed by a colon in a getopts specification.
+  local flags_with_argument
+  # $flags_sans_argument is a set of letters, corresponding to the option letters
+  # that wouldn't be followed by a colon in a getopts specification.
+  local flags_sans_argument
+  # $flags_solo is a set of letters, corresponding to option letters that, if
+  # present, mean the precommand will not be acting as a precommand, i.e., will
+  # not be followed by a :start: word.
+  local flags_solo
+  # $precommand_options maps precommand name to values of $flags_with_argument,
+  # $flags_sans_argument, and flags_solo for that precommand, joined by a
+  # colon.  (The value is NOT a getopt(3) spec, although it resembles one.)
+  #
+  # Currently, setting $flags_sans_argument is only important for commands that
+  # have a non-empty $flags_with_argument; see test-data/precommand4.zsh.
+  local -A precommand_options
+  precommand_options=(
+    # Precommand modifiers as of zsh 5.6.2 cf. zshmisc(1).
+    '-' ''
+    'builtin' ''
+    'command' :pvV
+    'exec' a:cl
+    'noglob' ''
+    # 'time' and 'nocorrect' shouldn't be added here; they're reserved words, not precommands.
+
+    # miscellaneous commands
+    'doas' aCu:Lns # as of OpenBSD's doas(1) dated September 4, 2016
+    'nice' n: # as of current POSIX spec
+    'pkexec' '' # doesn't take short options; immune to #121 because it's usually not passed --option flags
+    # Not listed: -h, which has two different meanings.
+    'sudo' Cgprtu:AEHPSbilns:eKkVv # as of sudo 1.8.21p2
+    'run0' ugD:h # systemd 256.6
+    'stdbuf' ioe:
+    'eatmydata' ''
+    'catchsegv' ''
+    'nohup' ''
+    'setsid' :wc
+    'env' u:i
+    'ionice' cn:t:pPu # util-linux 2.33.1-0.1
+    'strace' IbeaosXPpEuOS:ACdfhikqrtTvVxyDc # strace 4.26-0.2
+    'proxychains' f:q # proxychains 4.4.0
+    'torsocks' idq:upaP # Torsocks 2.3.0
+    'torify' idq:upaP # Torsocks 2.3.0
+    'ssh-agent' aEPt:csDd:k # As of OpenSSH 8.1p1
+    'tabbed' gnprtTuU:cdfhs:v # suckless-tools v44
+    'chronic' :ev # moreutils 0.62-1
+    'ifne' :n # moreutils 0.62-1
+    'grc' :se # grc - a "generic colouriser" (that's their spelling, not mine)
+    'cpulimit' elp:ivz # cpulimit 0.2
+    'ktrace' fgpt:aBCcdiT
+    'caffeinate' tw:dimsu # as of macOS's caffeinate(8) dated November 9, 2012
+  )
+  # Commands that would need to skip one positional argument:
+  #    flock
+  #    ssh
+  #    _wanted (skip two)
+
+  if [[ $zsyh_user_options[ignorebraces] == on || ${zsyh_user_options[ignoreclosebraces]:-off} == on ]]; then
+    local right_brace_is_recognised_everywhere=false
+  else
+    local right_brace_is_recognised_everywhere=true
+  fi
+
+  if [[ $zsyh_user_options[pathdirs] == on ]]; then
+    options_to_set+=( PATH_DIRS )
+  fi
+
+  ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR=(
+    '|' '||' ';' '&' '&&'
+    $'\n' # ${(z)} returns ';' but we convert it to $'\n'
+    '|&'
+    '&!' '&|'
+    # ### 'case' syntax, but followed by a pattern, not by a command
+    # ';;' ';&' ';|'
+  )
+
+  # Tokens that, at (naively-determined) "command position", are followed by
+  # a de jure command position.  All of these are reserved words.
+  ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW=(
+    $'\x7b' # block
+    $'\x28' # subshell
+    '()' # anonymous function
+    'while'
+    'until'
+    'if'
+    'then'
+    'elif'
+    'else'
+    'do'
+    'time'
+    'coproc'
+    '!' # reserved word; unrelated to $histchars[1]
+  )
+
+  if (( $+X_ZSH_HIGHLIGHT_DIRS_BLACKLIST )); then
+    print >&2 'zsh-syntax-highlighting: X_ZSH_HIGHLIGHT_DIRS_BLACKLIST is deprecated. Please use ZSH_HIGHLIGHT_DIRS_BLACKLIST.'
+    ZSH_HIGHLIGHT_DIRS_BLACKLIST=($X_ZSH_HIGHLIGHT_DIRS_BLACKLIST)
+    unset X_ZSH_HIGHLIGHT_DIRS_BLACKLIST
+  fi
+
+  _zsh_highlight_main_highlighter_highlight_list -$#PREBUFFER '' 1 "$PREBUFFER$BUFFER"
+
+  # end is a reserved word
+  local start end_ style
+  for start end_ style in $reply; do
+    (( start >= end_ )) && { print -r -- >&2 "zsh-syntax-highlighting: BUG: _zsh_highlight_highlighter_main_paint: start($start) >= end($end_)"; return }
+    (( end_ <= 0 )) && continue
+    (( start < 0 )) && start=0 # having start<0 is normal with e.g. multiline strings
+    _zsh_highlight_main_calculate_fallback $style
+    _zsh_highlight_add_highlight $start $end_ $reply
+  done
+}
+
+# Try to expand $1, if it's possible to do so safely.
+# 
+# Uses two parameters from the caller: $parameter_name_pattern and $res.
+#
+# If expansion was done, set $reply to the expansion and return true.
+# Otherwise, return false.
+_zsh_highlight_main_highlighter__try_expand_parameter()
+{
+  local arg="$1"
+  unset reply
+  {
+    # ### For now, expand just '$foo' or '${foo}', possibly with braces, but with
+    # ### no other features of the parameter expansion syntax.  (No ${(x)foo},
+    # ### no ${foo[x]}, no ${foo:-x}.)
+    {
+      local -a match mbegin mend
+      local MATCH; integer MBEGIN MEND
+      local parameter_name
+      local -a words
+      if [[ $arg[1] != '$' ]]; then
+        return 1
+      fi
+      if [[ ${arg[2]} == '{' ]] && [[ ${arg[-1]} == '}' ]]; then
+        parameter_name=${${arg:2}%?}
+      else
+        parameter_name=${arg:1}
+      fi
+      if [[ $res == none ]] && 
+         [[ ${parameter_name} =~ ^${~parameter_name_pattern}$ ]] &&
+         [[ ${(tP)MATCH} != *special* ]]
+      then
+        # Set $arg and update $res.
+        case ${(tP)MATCH} in
+          (*array*|*assoc*)
+            words=( ${(P)MATCH} )
+            ;;
+          ("")
+            # not set
+            words=( )
+            ;;
+          (*)
+            # scalar, presumably
+            if [[ $zsyh_user_options[shwordsplit] == on ]]; then
+              words=( ${(P)=MATCH} )
+            else
+              words=( ${(P)MATCH} )
+            fi
+            ;;
+        esac
+        reply=( "${words[@]}" )
+      else
+        return 1
+      fi
+    }
+  }
+}
+
+# $1 is the offset of $4 from the parent buffer. Added to the returned highlights.
+# $2 is the initial braces_stack (for a closing paren).
+# $3 is 1 if $4 contains the end of $BUFFER, else 0.
+# $4 is the buffer to highlight.
+# Returns:
+# $REPLY: $buf[REPLY] is the last character parsed.
+# $reply is an array of region_highlight additions.
+# exit code is 0 if the braces_stack is empty, 1 otherwise.
+_zsh_highlight_main_highlighter_highlight_list()
+{
+  integer start_pos end_pos=0 buf_offset=$1 has_end=$3
+  # alias_style is the style to apply to an alias once $#in_alias == 0
+  #     Usually 'alias' but set to 'unknown-token' if any word expanded from
+  #     the alias would be highlighted as unknown-token
+  # param_style is analogous for parameter expansions
+  local alias_style param_style last_arg arg buf=$4 highlight_glob=true saw_assignment=false style
+  local in_array_assignment=false # true between 'a=(' and the matching ')'
+  # in_alias is an array of integers with each element equal to the number
+  #     of shifts needed until arg=args[1] pops an arg from the next level up
+  #     alias or from BUFFER.
+  # in_param is analogous for parameter expansions
+  integer in_param=0 len=$#buf
+  local -a in_alias match mbegin mend list_highlights
+  # seen_alias is a map of aliases already seen to avoid loops like alias a=b b=a
+  local -A seen_alias
+  # Pattern for parameter names
+  readonly parameter_name_pattern='([A-Za-z_][A-Za-z0-9_]*|[0-9]+)'
+  list_highlights=()
+
+  # "R" for round
+  # "Q" for square
+  # "Y" for curly
+  # "T" for [[ ]]
+  # "S" for $( ), =( ), <( ), >( )
+  # "D" for do/done
+  # "$" for 'end' (matches 'foreach' always; also used with cshjunkiequotes in repeat/while)
+  # "?" for 'if'/'fi'; also checked by 'elif'/'else'
+  # ":" for 'then'
+  local braces_stack=$2
+
+  # State machine
+  #
+  # The states are:
+  # - :start:      Command word
+  # - :start_of_pipeline:      Start of a 'pipeline' as defined in zshmisc(1).
+  #                Only valid when :start: is present
+  # - :sudo_opt:   A leading-dash option to a precommand, whether it takes an
+  #                argument or not.  (Example: sudo's "-u" or "-i".)
+  # - :sudo_arg:   The argument to a precommand's leading-dash option,
+  #                when given as a separate word; i.e., "foo" in "-u foo" (two
+  #                words) but not in "-ufoo" (one word).
+  #    Note:       :sudo_opt: and :sudo_arg: are used for any precommand
+  #                declared in ${precommand_options}, not just for sudo(8).
+  #                The naming is historical.
+  # - :regular:    "Not a command word", and command delimiters are permitted.
+  #                Mainly used to detect premature termination of commands.
+  # - :always:     The word 'always' in the «{ foo } always { bar }» syntax.
+  #
+  # When the kind of a word is not yet known, $this_word / $next_word may contain
+  # multiple states.  For example, after "sudo -i", the next word may be either
+  # another --flag or a command name, hence the state would include both ':start:'
+  # and ':sudo_opt:'.
+  #
+  # The tokens are always added with both leading and trailing colons to serve as
+  # word delimiters (an improvised array); [[ $x == *':foo:'* ]] and x=${x//:foo:/}
+  # will DTRT regardless of how many elements or repetitions $x has.
+  #
+  # Handling of redirections: upon seeing a redirection token, we must stall
+  # the current state --- that is, the value of $this_word --- for two iterations
+  # (one for the redirection operator, one for the word following it representing
+  # the redirection target).  Therefore, we set $in_redirection to 2 upon seeing a
+  # redirection operator, decrement it each iteration, and stall the current state
+  # when it is non-zero.  Thus, upon reaching the next word (the one that follows
+  # the redirection operator and target), $this_word will still contain values
+  # appropriate for the word immediately following the word that preceded the
+  # redirection operator.
+  #
+  # The "the previous word was a redirection operator" state is not communicated
+  # to the next iteration via $next_word/$this_word as usual, but via
+  # $in_redirection.  The value of $next_word from the iteration that processed
+  # the operator is discarded.
+  #
+  # $in_redirection is currently used for:
+  # - comments
+  # - aliases
+  # - redirections
+  # - parameter elision in command position
+  # - 'repeat' loops
+  #
+  local this_word next_word=':start::start_of_pipeline:'
+  integer in_redirection
+  # Processing buffer
+  local proc_buf="$buf"
+  local -a args
+  if [[ $zsyh_user_options[interactivecomments] == on ]]; then
+    args=(${(zZ+c+)buf})
+  else
+    args=(${(z)buf})
+  fi
+
+  # Special case: $(<*) isn't globbing.
+  if [[ $braces_stack == 'S' ]] && (( $+args[3] && ! $+args[4] )) && [[ $args[3] == $'\x29' ]] &&
+     [[ $args[1] == *'<'* ]] && _zsh_highlight_main__is_redirection $args[1]; then
+    highlight_glob=false
+  fi
+
+  while (( $#args )); do
+    last_arg=$arg
+    arg=$args[1]
+    shift args
+    if (( $#in_alias )); then
+      (( in_alias[1]-- ))
+      # Remove leading 0 entries
+      in_alias=($in_alias[$in_alias[(i)<1->],-1])
+      if (( $#in_alias == 0 )); then
+        seen_alias=()
+        # start_pos and end_pos are of the alias (previous $arg) here
+        _zsh_highlight_main_add_region_highlight $start_pos $end_pos $alias_style
+      else
+        # We can't unset keys that contain special characters (] \ and some others).
+        # More details: https://www.zsh.org/workers/43269
+        (){
+          local alias_name
+          for alias_name in ${(k)seen_alias[(R)<$#in_alias->]}; do
+            seen_alias=("${(@kv)seen_alias[(I)^$alias_name]}")
+          done
+        }
+      fi
+    fi
+    if (( in_param )); then
+      (( in_param-- ))
+      if (( in_param == 0 )); then
+        # start_pos and end_pos are of the '$foo' word (previous $arg) here
+        _zsh_highlight_main_add_region_highlight $start_pos $end_pos $param_style
+        param_style=""
+      fi
+    fi
+
+    # Initialize this_word and next_word.
+    if (( in_redirection == 0 )); then
+      this_word=$next_word
+      next_word=':regular:'
+    elif (( !in_param )); then
+      # Stall $next_word.
+      (( --in_redirection ))
+    fi
+
+    # Initialize per-"simple command" [zshmisc(1)] variables:
+    #
+    #   $style               how to highlight $arg
+    #   $in_array_assignment boolean flag for "between '(' and ')' of array assignment"
+    #   $highlight_glob      boolean flag for "'noglob' is in effect"
+    #   $saw_assignment      boolean flag for "was preceded by an assignment"
+    #
+    style=unknown-token
+    if [[ $this_word == *':start:'* ]]; then
+      in_array_assignment=false
+      if [[ $arg == 'noglob' ]]; then
+        highlight_glob=false
+      fi
+    fi
+
+    if (( $#in_alias == 0 && in_param == 0 )); then
+      # Compute the new $start_pos and $end_pos, skipping over whitespace in $buf.
+      [[ "$proc_buf" = (#b)(#s)(''([ $'\t']|[\\]$'\n')#)(?|)* ]]
+      # The first, outer parenthesis
+      integer offset="${#match[1]}"
+      (( start_pos = end_pos + offset ))
+      (( end_pos = start_pos + $#arg ))
+
+      # The zsh lexer considers ';' and newline to be the same token, so
+      # ${(z)} converts all newlines to semicolons. Convert them back here to
+      # make later processing simpler.
+      [[ $arg == ';' && ${match[3]} == $'\n' ]] && arg=$'\n'
+
+      # Compute the new $proc_buf. We advance it
+      # (chop off characters from the beginning)
+      # beyond what end_pos points to, by skipping
+      # as many characters as end_pos was advanced.
+      #
+      # end_pos was advanced by $offset (via start_pos)
+      # and by $#arg. Note the `start_pos=$end_pos`
+      # below.
+      #
+      # As for the [,len]. We could use [,len-start_pos+offset]
+      # here, but to make it easier on eyes, we use len and
+      # rely on the fact that Zsh simply handles that. The
+      # length of proc_buf is len-start_pos+offset because
+      # we're chopping it to match current start_pos, so its
+      # length matches the previous value of start_pos.
+      #
+      # Why [,-1] is slower than [,length] isn't clear.
+      proc_buf="${proc_buf[offset + $#arg + 1,len]}"
+    fi
+
+    # Handle the INTERACTIVE_COMMENTS option.
+    #
+    # We use the (Z+c+) flag so the entire comment is presented as one token in $arg.
+    if [[ $zsyh_user_options[interactivecomments] == on && $arg[1] == $histchars[3] ]]; then
+      if [[ $this_word == *(':regular:'|':start:')* ]]; then
+        style=comment
+      else
+        style=unknown-token # prematurely terminated
+      fi
+      _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style
+      # Stall this arg
+      in_redirection=1
+      continue
+    fi
+
+    if [[ $this_word == *':start:'* ]] && ! (( in_redirection )); then
+      # Expand aliases.
+      # An alias is ineligible for expansion while it's being expanded (see #652/#653).
+      _zsh_highlight_main__type "$arg" "$(( ! ${+seen_alias[$arg]} ))"
+      local res="$REPLY"
+      if [[ $res == "alias" ]]; then
+        # Mark insane aliases as unknown-token (cf. #263).
+        if [[ $arg == ?*=* ]]; then
+          _zsh_highlight_main_add_region_highlight $start_pos $end_pos unknown-token
+          continue
+        fi
+        seen_alias[$arg]=$#in_alias
+        _zsh_highlight_main__resolve_alias $arg
+        local -a alias_args
+        # Elision is desired in case alias x=''
+        if [[ $zsyh_user_options[interactivecomments] == on ]]; then
+          alias_args=(${(zZ+c+)REPLY})
+        else
+          alias_args=(${(z)REPLY})
+        fi
+        args=( $alias_args $args )
+        if (( $#in_alias == 0 )); then
+          alias_style=alias
+        else
+          # Transfer the count of this arg to the new element about to be appended.
+          (( in_alias[1]-- ))
+        fi
+        # Add one because we will in_alias[1]-- on the next loop iteration so
+        # this iteration should be considered in in_alias as well
+        in_alias=( $(($#alias_args + 1)) $in_alias )
+        (( in_redirection++ )) # Stall this arg
+        continue
+      else
+        _zsh_highlight_main_highlighter_expand_path $arg
+        _zsh_highlight_main__type "$REPLY" 0
+        res="$REPLY"
+      fi
+    fi
+
+    # Analyse the current word.
+    if _zsh_highlight_main__is_redirection $arg ; then
+      if (( in_redirection == 1 )); then
+        # Two consecutive redirection operators is an error.
+        _zsh_highlight_main_add_region_highlight $start_pos $end_pos unknown-token
+      else
+        in_redirection=2
+        _zsh_highlight_main_add_region_highlight $start_pos $end_pos redirection
+      fi
+      continue
+    elif [[ $arg == '{'${~parameter_name_pattern}'}' ]] && _zsh_highlight_main__is_redirection $args[1]; then
+      # named file descriptor: {foo}>&2
+      in_redirection=3
+      _zsh_highlight_main_add_region_highlight $start_pos $end_pos named-fd
+      continue
+    fi
+
+    # Expand parameters.
+    if (( ! in_param )) && _zsh_highlight_main_highlighter__try_expand_parameter "$arg"; then
+      # That's not entirely correct --- if the parameter's value happens to be a reserved
+      # word, the parameter expansion will be highlighted as a reserved word --- but that
+      # incorrectness is outweighed by the usability improvement of permitting the use of
+      # parameters that refer to commands, functions, and builtins.
+      () {
+        local -a words; words=( "${reply[@]}" )
+        if (( $#words == 0 )) && (( ! in_redirection )); then
+          # Parameter elision is happening
+          (( ++in_redirection ))
+          _zsh_highlight_main_add_region_highlight $start_pos $end_pos comment
+          continue
+        else
+          (( in_param = 1 + $#words ))
+          args=( $words $args )
+          arg=$args[1]
+          _zsh_highlight_main__type "$arg" 0
+          res=$REPLY
+        fi
+      }
+    fi
+
+    # Parse the sudo command line
+    if (( ! in_redirection )); then
+      if [[ $this_word == *':sudo_opt:'* ]]; then
+        if [[ -n $flags_with_argument ]] &&
+           { 
+             # Trenary
+             if [[ -n $flags_sans_argument ]]
+             then [[ $arg == '-'[$flags_sans_argument]#[$flags_with_argument] ]]
+             else [[ $arg == '-'[$flags_with_argument] ]]
+             fi
+           } then
+          # Flag that requires an argument
+          this_word=${this_word//:start:/}
+          next_word=':sudo_arg:'
+        elif [[ -n $flags_with_argument ]] &&
+             {
+               # Trenary
+               if [[ -n $flags_sans_argument ]]
+               then [[ $arg == '-'[$flags_sans_argument]#[$flags_with_argument]* ]]
+               else [[ $arg == '-'[$flags_with_argument]* ]]
+               fi
+             } then
+          # Argument attached in the same word
+          this_word=${this_word//:start:/}
+          next_word+=':start:'
+          next_word+=':sudo_opt:'
+        elif [[ -n $flags_sans_argument ]] &&
+             [[ $arg == '-'[$flags_sans_argument]# ]]; then
+          # Flag that requires no argument
+          this_word=':sudo_opt:'
+          next_word+=':start:'
+          next_word+=':sudo_opt:'
+        elif [[ -n $flags_solo ]] && 
+             {
+               # Trenary
+               if [[ -n $flags_sans_argument ]]
+               then [[ $arg == '-'[$flags_sans_argument]#[$flags_solo]* ]]
+               else [[ $arg == '-'[$flags_solo]* ]]
+               fi
+             } then
+          # Solo flags
+          this_word=':sudo_opt:'
+          next_word=':regular:' # no :start:, nor :sudo_opt: since we don't know whether the solo flag takes an argument or not
+        elif [[ $arg == '-'* ]]; then
+          # Unknown flag.  We don't know whether it takes an argument or not,
+          # so modify $next_word as we do for flags that require no argument.
+          # With that behaviour, if the flag in fact takes no argument we'll
+          # highlight the inner command word correctly, and if it does take an
+          # argument we'll highlight the command word correctly if the argument
+          # was given in the same shell word as the flag (as in '-uphy1729' or
+          # '--user=phy1729' without spaces).
+          this_word=':sudo_opt:'
+          next_word+=':start:'
+          next_word+=':sudo_opt:'
+        else
+          # Not an option flag; nothing to do.  (If the command line is
+          # syntactically valid, ${this_word//:sudo_opt:/} should be
+          # non-empty now.)
+          this_word=${this_word//:sudo_opt:/}
+        fi
+      elif [[ $this_word == *':sudo_arg:'* ]]; then
+        next_word+=':sudo_opt:'
+        next_word+=':start:'
+      fi
+    fi
+
+    # The Great Fork: is this a command word?  Is this a non-command word?
+    if [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_COMMANDSEPARATOR:#"$arg"} ]] &&
+       [[ $braces_stack != *T* || $arg != ('||'|'&&') ]]; then
+
+      # First, determine the style of the command separator itself.
+      if _zsh_highlight_main__stack_pop T || _zsh_highlight_main__stack_pop Q; then
+        # Missing closing square bracket(s)
+        style=unknown-token
+      elif $in_array_assignment; then
+        case $arg in
+          # Literal newlines are just fine.
+          ($'\n') style=commandseparator;;
+          # Semicolons are parsed the same way as literal newlines.  Nevertheless,
+          # highlight them as errors since they're probably unintended.  Compare
+          # issue #691.
+          (';') style=unknown-token;;
+          # Other command separators aren't allowed.
+          (*) style=unknown-token;;
+        esac
+      elif [[ $this_word == *':regular:'* ]]; then
+        style=commandseparator
+      elif [[ $this_word == *':start:'* ]] && [[ $arg == $'\n' ]]; then
+        style=commandseparator
+      elif [[ $this_word == *':start:'* ]] && [[ $arg == ';' ]] && (( $#in_alias )); then
+        style=commandseparator 
+      else
+        # Empty commands (semicolon follows nothing) are valid syntax.
+        # However, in interactive use they are likely to be erroneous;
+        # therefore, we highlight them as errors.
+        #
+        # Alias definitions are exempted from this check to allow multiline aliases
+        # with explicit (redundant) semicolons: «alias foo=$'bar;\nbaz'» (issue #677).
+        #
+        # See also #691 about possibly changing the style used here. 
+        style=unknown-token
+      fi
+
+      # Second, determine the style of next_word.
+      if [[ $arg == $'\n' ]] && $in_array_assignment; then
+        # literal newline inside an array assignment
+        next_word=':regular:'
+      elif [[ $arg == ';' ]] && $in_array_assignment; then
+        # literal semicolon inside an array assignment
+        next_word=':regular:'
+      else
+        next_word=':start:'
+        highlight_glob=true
+        saw_assignment=false
+        (){
+          local alias_name
+          for alias_name in ${(k)seen_alias[(R)<$#in_alias->]}; do
+            # We can't unset keys that contain special characters (] \ and some others).
+            # More details: https://www.zsh.org/workers/43269
+            seen_alias=("${(@kv)seen_alias[(I)^$alias_name]}")
+          done
+        }
+        if [[ $arg != '|' && $arg != '|&' ]]; then
+          next_word+=':start_of_pipeline:'
+        fi
+      fi
+
+    elif ! (( in_redirection)) && [[ $this_word == *':always:'* && $arg == 'always' ]]; then
+      # try-always construct
+      style=reserved-word # de facto a reserved word, although not de jure
+      highlight_glob=true
+      saw_assignment=false
+      next_word=':start::start_of_pipeline:' # only left brace is allowed, apparently
+    elif ! (( in_redirection)) && [[ $this_word == *':start:'* ]]; then # $arg is the command word
+      if (( ${+precommand_options[$arg]} )) && _zsh_highlight_main__is_runnable $arg; then
+        style=precommand
+        () {
+          set -- "${(@s.:.)precommand_options[$arg]}"
+          flags_with_argument=$1
+          flags_sans_argument=$2
+          flags_solo=$3
+        }
+        next_word=${next_word//:regular:/}
+        next_word+=':sudo_opt:'
+        next_word+=':start:'
+        if [[ $arg == 'exec' || $arg == 'env' ]]; then
+          # To allow "exec 2>&1;" and "env | grep" where there's no command word
+          next_word+=':regular:'
+        fi
+      else
+        case $res in
+          (reserved)    # reserved word
+                        style=reserved-word
+                        # Match braces and handle special cases.
+                        case $arg in
+                          (time|nocorrect)
+                            next_word=${next_word//:regular:/}
+                            next_word+=':start:'
+                            ;;
+                          ($'\x7b')
+                            braces_stack='Y'"$braces_stack"
+                            ;;
+                          ($'\x7d')
+                            # We're at command word, so no need to check $right_brace_is_recognised_everywhere
+                            _zsh_highlight_main__stack_pop 'Y' reserved-word
+                            if [[ $style == reserved-word ]]; then
+                              next_word+=':always:'
+                            fi
+                            ;;
+                          ($'\x5b\x5b')
+                            braces_stack='T'"$braces_stack"
+                            ;;
+                          ('do')
+                            braces_stack='D'"$braces_stack"
+                            ;;
+                          ('done')
+                            _zsh_highlight_main__stack_pop 'D' reserved-word
+                            ;;
+                          ('if')
+                            braces_stack=':?'"$braces_stack"
+                            ;;
+                          ('then')
+                            _zsh_highlight_main__stack_pop ':' reserved-word
+                            ;;
+                          ('elif')
+                            if [[ ${braces_stack[1]} == '?' ]]; then
+                              braces_stack=':'"$braces_stack"
+                            else
+                              style=unknown-token
+                            fi
+                            ;;
+                          ('else')
+                            if [[ ${braces_stack[1]} == '?' ]]; then
+                              :
+                            else
+                              style=unknown-token
+                            fi
+                            ;;
+                          ('fi')
+                            _zsh_highlight_main__stack_pop '?'
+                            ;;
+                          ('foreach')
+                            braces_stack='$'"$braces_stack"
+                            ;;
+                          ('end')
+                            _zsh_highlight_main__stack_pop '$' reserved-word
+                            ;;
+                          ('repeat')
+                            # skip the repeat-count word
+                            in_redirection=2
+                            # The redirection mechanism assumes $this_word describes the word
+                            # following the redirection.  Make it so.
+                            #
+                            # That word can be a command word with shortloops (`repeat 2 ls`)
+                            # or a command separator (`repeat 2; ls` or `repeat 2; do ls; done`).
+                            #
+                            # The repeat-count word will be handled like a redirection target.
+                            this_word=':start::regular:'
+                            ;;
+                          ('!')
+                            if [[ $this_word != *':start_of_pipeline:'* ]]; then
+                              style=unknown-token
+                            else
+                              # '!' reserved word at start of pipeline; style already set above
+                            fi
+                            ;;
+                        esac
+                        if $saw_assignment && [[ $style != unknown-token ]]; then
+                          style=unknown-token
+                        fi
+                        ;;
+          ('suffix alias')
+                        style=suffix-alias
+                        ;;
+          ('global alias')
+                        style=global-alias
+                        ;;
+          (alias)       :;;
+          (builtin)     style=builtin
+                        [[ $arg == $'\x5b' ]] && braces_stack='Q'"$braces_stack"
+                        ;;
+          (function)    style=function;;
+          (command)     style=command;;
+          (hashed)      style=hashed-command;;
+          (none)        if (( ! in_param )) && _zsh_highlight_main_highlighter_check_assign; then
+                          _zsh_highlight_main_add_region_highlight $start_pos $end_pos assign
+                          local i=$(( arg[(i)=] + 1 ))
+                          saw_assignment=true
+                          if [[ $arg[i] == '(' ]]; then
+                            in_array_assignment=true
+                            _zsh_highlight_main_add_region_highlight start_pos+i-1 start_pos+i reserved-word
+                          else
+                            # assignment to a scalar parameter.
+                            # (For array assignments, the command doesn't start until the ")" token.)
+                            # 
+                            # Discard  :start_of_pipeline:, if present, as '!' is not valid
+                            # after assignments.
+                            next_word+=':start:'
+                            if (( i <= $#arg )); then
+                              () {
+                                local highlight_glob=false
+                                [[ $zsyh_user_options[globassign] == on ]] && highlight_glob=true
+                                _zsh_highlight_main_highlighter_highlight_argument $i
+                              }
+                            fi
+                          fi
+                          continue
+                        elif (( ! in_param )) &&
+                             [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then
+                          style=history-expansion
+                        elif (( ! in_param )) &&
+                             [[ $arg[0,1] == $histchars[2,2] ]]; then
+                          style=history-expansion
+                        elif (( ! in_param )) &&
+                             ! $saw_assignment &&
+                             [[ $arg[1,2] == '((' ]]; then
+                          # Arithmetic evaluation.
+                          #
+                          # Note: prior to zsh-5.1.1-52-g4bed2cf (workers/36669), the ${(z)...}
+                          # splitter would only output the '((' token if the matching '))' had
+                          # been typed.  Therefore, under those versions of zsh, BUFFER="(( 42"
+                          # would be highlighted as an error until the matching "))" are typed.
+                          #
+                          # We highlight just the opening parentheses, as a reserved word; this
+                          # is how [[ ... ]] is highlighted, too.
+                          _zsh_highlight_main_add_region_highlight $start_pos $((start_pos + 2)) reserved-word
+                          if [[ $arg[-2,-1] == '))' ]]; then
+                            _zsh_highlight_main_add_region_highlight $((end_pos - 2)) $end_pos reserved-word
+                          fi
+                          continue
+                        elif (( ! in_param )) &&
+                             [[ $arg == '()' ]]; then
+                          # anonymous function
+                          style=reserved-word
+                        elif (( ! in_param )) &&
+                             ! $saw_assignment &&
+                             [[ $arg == $'\x28' ]]; then
+                          # subshell
+                          style=reserved-word
+                          braces_stack='R'"$braces_stack"
+                        elif (( ! in_param )) &&
+                             [[ $arg == $'\x29' ]]; then
+                          # end of subshell or command substitution
+                          if _zsh_highlight_main__stack_pop 'S'; then
+                            REPLY=$start_pos
+                            reply=($list_highlights)
+                            return 0
+                          fi
+                          _zsh_highlight_main__stack_pop 'R' reserved-word
+                        else
+                          if _zsh_highlight_main_highlighter_check_path $arg 1; then
+                            style=$REPLY
+                          else
+                            style=unknown-token
+                          fi
+                        fi
+                        ;;
+          (*)           _zsh_highlight_main_add_region_highlight $start_pos $end_pos arg0_$res
+                        continue
+                        ;;
+        esac
+      fi
+      if [[ -n ${(M)ZSH_HIGHLIGHT_TOKENS_CONTROL_FLOW:#"$arg"} ]]; then
+        next_word=':start::start_of_pipeline:'
+      fi
+    elif _zsh_highlight_main__is_global_alias "$arg"; then # $arg is a global alias that isn't in command position
+      style=global-alias
+    else # $arg is a non-command word
+      case $arg in
+        ($'\x29')
+                  # subshell or end of array assignment
+                  if $in_array_assignment; then
+                    _zsh_highlight_main_add_region_highlight $start_pos $end_pos assign
+                    _zsh_highlight_main_add_region_highlight $start_pos $end_pos reserved-word
+                    in_array_assignment=false
+                    next_word+=':start:'
+                    continue
+                  elif (( in_redirection )); then
+                    style=unknown-token
+                  else
+                    if _zsh_highlight_main__stack_pop 'S'; then
+                      REPLY=$start_pos
+                      reply=($list_highlights)
+                      return 0
+                    fi
+                    _zsh_highlight_main__stack_pop 'R' reserved-word
+                  fi
+                  ;;
+        ($'\x28\x29')
+                  # possibly a function definition
+                  if (( in_redirection )) || $in_array_assignment; then
+                    style=unknown-token
+                  else
+                    if [[ $zsyh_user_options[multifuncdef] == on ]] || false # TODO: or if the previous word was a command word
+                    then
+                      next_word+=':start::start_of_pipeline:'
+                    fi
+                    style=reserved-word
+                  fi
+                  ;;
+        (*)       if false; then
+                  elif [[ $arg = $'\x7d' ]] && $right_brace_is_recognised_everywhere; then
+                    # Parsing rule: {
+                    #
+                    #     Additionally, `tt(})' is recognized in any position if neither the
+                    #     tt(IGNORE_BRACES) option nor the tt(IGNORE_CLOSE_BRACES) option is set.
+                    if (( in_redirection )) || $in_array_assignment; then
+                      style=unknown-token
+                    else
+                      _zsh_highlight_main__stack_pop 'Y' reserved-word
+                      if [[ $style == reserved-word ]]; then
+                        next_word+=':always:'
+                      fi
+                    fi
+                  elif [[ $arg[0,1] = $histchars[0,1] ]] && (( $#arg[0,2] == 2 )); then
+                    style=history-expansion
+                  elif [[ $arg == $'\x5d\x5d' ]] && _zsh_highlight_main__stack_pop 'T' reserved-word; then
+                    :
+                  elif [[ $arg == $'\x5d' ]] && _zsh_highlight_main__stack_pop 'Q' builtin; then
+                    :
+                  else
+                    _zsh_highlight_main_highlighter_highlight_argument 1 $(( 1 != in_redirection ))
+                    continue
+                  fi
+                  ;;
+      esac
+    fi
+    _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style
+  done
+  (( $#in_alias )) && in_alias=() _zsh_highlight_main_add_region_highlight $start_pos $end_pos $alias_style
+  (( in_param == 1 )) && in_param=0 _zsh_highlight_main_add_region_highlight $start_pos $end_pos $param_style
+  [[ "$proc_buf" = (#b)(#s)(([[:space:]]|\\$'\n')#) ]]
+  REPLY=$(( end_pos + ${#match[1]} - 1 ))
+  reply=($list_highlights)
+  return $(( $#braces_stack > 0 ))
+}
+
+# Check if $arg is variable assignment
+_zsh_highlight_main_highlighter_check_assign()
+{
+    setopt localoptions extended_glob
+    [[ $arg == [[:alpha:]_][[:alnum:]_]#(|\[*\])(|[+])=* ]] ||
+      [[ $arg == [0-9]##(|[+])=* ]]
+}
+
+_zsh_highlight_main_highlighter_highlight_path_separators()
+{
+  local pos style_pathsep
+  style_pathsep=$1_pathseparator
+  reply=()
+  [[ -z "$ZSH_HIGHLIGHT_STYLES[$style_pathsep]" || "$ZSH_HIGHLIGHT_STYLES[$1]" == "$ZSH_HIGHLIGHT_STYLES[$style_pathsep]" ]] && return 0
+  for (( pos = start_pos; $pos <= end_pos; pos++ )) ; do
+    if [[ $BUFFER[pos] == / ]]; then
+      reply+=($((pos - 1)) $pos $style_pathsep)
+    fi
+  done
+}
+
+# Check if $1 is a path.
+# If yes, return 0 and in $REPLY the style to use.
+# Else, return non-zero (and the contents of $REPLY is undefined).
+#
+# $2 should be non-zero iff we're in command position.
+_zsh_highlight_main_highlighter_check_path()
+{
+  _zsh_highlight_main_highlighter_expand_path "$1"
+  local expanded_path="$REPLY" tmp_path
+  integer in_command_position=$2
+
+  if [[ $zsyh_user_options[autocd] == on ]]; then
+    integer autocd=1
+  else
+    integer autocd=0
+  fi
+
+  if (( in_command_position )); then
+    # ### Currently, this value is never returned: either it's overwritten
+    # ### below, or the return code is non-zero
+    REPLY=arg0
+  else
+    REPLY=path
+  fi
+
+  if [[ ${1[1]} == '=' && $1 == ??* && ${1[2]} != $'\x28' && $zsyh_user_options[equals] == 'on' && $expanded_path[1] != '/' ]]; then
+    REPLY=unknown-token # will error out if executed
+    return 0
+  fi
+
+  [[ -z $expanded_path ]] && return 1
+
+  # Check if this is a blacklisted path
+  if [[ $expanded_path[1] == / ]]; then
+    tmp_path=$expanded_path
+  else
+    tmp_path=$PWD/$expanded_path
+  fi
+  tmp_path=$tmp_path:a
+
+  local candidate_new_tmp_path
+  while [[ $tmp_path != / ]]; do
+    [[ -n ${(M)ZSH_HIGHLIGHT_DIRS_BLACKLIST:#$tmp_path} ]] && return 1
+    candidate_new_tmp_path=${tmp_path:h}
+    if [[ $candidate_new_tmp_path == $tmp_path ]]; then
+      break
+    fi
+    tmp_path=${candidate_new_tmp_path}
+  done
+
+  if (( in_command_position )); then
+    if [[ -x $expanded_path ]]; then
+      if (( autocd )); then
+        if [[ -d $expanded_path ]]; then
+          REPLY=autodirectory
+        fi
+        return 0
+      elif [[ ! -d $expanded_path ]]; then
+        # ### This seems unreachable for the current callers
+        return 0
+      fi
+    fi
+  else
+    if [[ -L $expanded_path || -e $expanded_path ]]; then
+      return 0
+    fi
+  fi
+
+  # Search the path in CDPATH
+  if [[ $expanded_path != /* ]] && (( autocd || ! in_command_position )); then
+    # TODO: When we've dropped support for pre-5.0.6 zsh, use the *(Y1) glob qualifier here.
+    local cdpath_dir
+    for cdpath_dir in $cdpath ; do
+      if [[ -d "$cdpath_dir/$expanded_path" && -x "$cdpath_dir/$expanded_path" ]]; then
+        if (( in_command_position && autocd )); then
+          REPLY=autodirectory
+        fi
+        return 0
+      fi
+    done
+  fi
+
+  # If dirname($1) doesn't exist, neither does $1.
+  [[ ! -d ${expanded_path:h} ]] && return 1
+
+  # If this word ends the buffer, check if it's the prefix of a valid path.
+  if (( has_end && (len == end_pos) )) &&
+     (( ! $#in_alias )) &&
+     [[ $WIDGET != zle-line-finish ]]; then
+    # TODO: When we've dropped support for pre-5.0.6 zsh, use the *(Y1) glob qualifier here.
+    local -a tmp
+    if (( in_command_position )); then
+      # We include directories even when autocd is enabled, because those
+      # directories might contain executable files: e.g., BUFFER="/bi" en route
+      # to typing "/bin/sh".
+      tmp=( ${expanded_path}*(N-*,N-/) )
+    else
+      tmp=( ${expanded_path}*(N) )
+    fi
+    (( ${+tmp[1]} )) && REPLY=path_prefix && return 0
+  fi
+
+  # It's not a path.
+  return 1
+}
+
+# Highlight an argument and possibly special chars in quotes starting at $1 in $arg
+# This command will at least highlight $1 to end_pos with the default style
+# If $2 is set to 0, the argument cannot be highlighted as an option.
+#
+# This function currently assumes it's never called for the command word.
+_zsh_highlight_main_highlighter_highlight_argument()
+{
+  local base_style=default i=$1 option_eligible=${2:-1} path_eligible=1 ret start style
+  local -a highlights
+
+  local -a match mbegin mend
+  local MATCH; integer MBEGIN MEND
+
+  case "$arg[i]" in
+    '%')
+      if [[ $arg[i+1] == '?' ]]; then
+        (( i += 2 ))
+      fi
+      ;;
+    '-')
+      if (( option_eligible )); then
+        if [[ $arg[i+1] == - ]]; then
+          base_style=double-hyphen-option
+        else
+          base_style=single-hyphen-option
+        fi
+        path_eligible=0
+      fi
+      ;;
+    '=')
+      if [[ $arg[i+1] == $'\x28' ]]; then
+        (( i += 2 ))
+        _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,-1]
+        ret=$?
+        (( i += REPLY ))
+        highlights+=(
+          $(( start_pos + $1 - 1 )) $(( start_pos + i )) process-substitution
+          $(( start_pos + $1 - 1 )) $(( start_pos + $1 + 1 )) process-substitution-delimiter
+          $reply
+        )
+        if (( ret == 0 )); then
+          highlights+=($(( start_pos + i - 1 )) $(( start_pos + i )) process-substitution-delimiter)
+        fi
+      fi
+  esac
+
+  # This loop is a hot path.  Keep it fast!
+  (( --i ))
+  while (( ++i <= $#arg )); do
+    i=${arg[(ib.i.)[\\\'\"\`\$\<\>\*\?]]}
+    case "$arg[$i]" in
+      "") break;;
+      "\\") (( i += 1 )); continue;;
+      "'")
+        _zsh_highlight_main_highlighter_highlight_single_quote $i
+        (( i = REPLY ))
+        highlights+=($reply)
+        ;;
+      '"')
+        _zsh_highlight_main_highlighter_highlight_double_quote $i
+        (( i = REPLY ))
+        highlights+=($reply)
+        ;;
+      '`')
+        _zsh_highlight_main_highlighter_highlight_backtick $i
+        (( i = REPLY ))
+        highlights+=($reply)
+        ;;
+      '$')
+        if [[ $arg[i+1] != "'" ]]; then
+          path_eligible=0
+        fi
+        if [[ $arg[i+1] == "'" ]]; then
+          _zsh_highlight_main_highlighter_highlight_dollar_quote $i
+          (( i = REPLY ))
+          highlights+=($reply)
+          continue
+        elif [[ $arg[i+1] == $'\x28' ]]; then
+          if [[ $arg[i+2] == $'\x28' ]] && _zsh_highlight_main_highlighter_highlight_arithmetic $i; then
+            # Arithmetic expansion
+            (( i = REPLY ))
+            highlights+=($reply)
+            continue
+          fi
+          start=$i
+          (( i += 2 ))
+          _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,-1]
+          ret=$?
+          (( i += REPLY ))
+          highlights+=(
+            $(( start_pos + start - 1)) $(( start_pos + i )) command-substitution-unquoted
+            $(( start_pos + start - 1)) $(( start_pos + start + 1)) command-substitution-delimiter-unquoted
+            $reply
+          )
+          if (( ret == 0 )); then
+            highlights+=($(( start_pos + i - 1)) $(( start_pos + i )) command-substitution-delimiter-unquoted)
+          fi
+          continue
+        fi
+        while [[ $arg[i+1] == [=~#+'^'] ]]; do
+          (( i += 1 ))
+        done
+        if [[ $arg[i+1] == [*@#?$!-] ]]; then
+          (( i += 1 ))
+        fi;;
+      [\<\>])
+        if [[ $arg[i+1] == $'\x28' ]]; then # \x28 = open paren
+          start=$i
+          (( i += 2 ))
+          _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,-1]
+          ret=$?
+          (( i += REPLY ))
+          highlights+=(
+            $(( start_pos + start - 1)) $(( start_pos + i )) process-substitution
+            $(( start_pos + start - 1)) $(( start_pos + start + 1 )) process-substitution-delimiter
+            $reply
+          )
+          if (( ret == 0 )); then
+            highlights+=($(( start_pos + i - 1)) $(( start_pos + i )) process-substitution-delimiter)
+          fi
+          continue
+        fi
+        ;|
+      *)
+        if $highlight_glob &&
+           [[ $zsyh_user_options[multios] == on || $in_redirection -eq 0 ]] &&
+           [[ ${arg[$i]} =~ ^[*?] || ${arg:$i-1} =~ ^\<[0-9]*-[0-9]*\> ]]; then
+          highlights+=($(( start_pos + i - 1 )) $(( start_pos + i + $#MATCH - 1)) globbing)
+          (( i += $#MATCH - 1 ))
+          path_eligible=0
+        else
+          continue
+        fi
+        ;;
+    esac
+  done
+
+  if (( path_eligible )); then
+    if (( in_redirection )) && [[ $last_arg == *['<>']['&'] && $arg[$1,-1] == (<0->|p|-) ]]; then
+      if [[ $arg[$1,-1] == (p|-) ]]; then
+        base_style=redirection
+      else
+        base_style=numeric-fd
+      fi
+    # This function is currently never called for the command word, so $2 is hard-coded as 0.
+    elif _zsh_highlight_main_highlighter_check_path $arg[$1,-1] 0; then
+      base_style=$REPLY
+      _zsh_highlight_main_highlighter_highlight_path_separators $base_style
+      highlights+=($reply)
+    fi
+  fi
+
+  highlights=($(( start_pos + $1 - 1 )) $end_pos $base_style $highlights)
+  _zsh_highlight_main_add_many_region_highlights $highlights
+}
+
+# Quote Helper Functions
+#
+# $arg is expected to be set to the current argument
+# $start_pos is expected to be set to the start of $arg in $BUFFER
+# $1 is the index in $arg which starts the quote
+# $REPLY is returned as the end of quote index in $arg
+# $reply is returned as an array of region_highlight additions
+
+# Highlight single-quoted strings
+_zsh_highlight_main_highlighter_highlight_single_quote()
+{
+  local arg1=$1 i q=\' style
+  i=$arg[(ib:arg1+1:)$q]
+  reply=()
+
+  if [[ $zsyh_user_options[rcquotes] == on ]]; then
+    while [[ $arg[i+1] == "'" ]]; do
+      reply+=($(( start_pos + i - 1 )) $(( start_pos + i + 1 )) rc-quote)
+      (( i++ ))
+      i=$arg[(ib:i+1:)$q]
+    done
+  fi
+
+  if [[ $arg[i] == "'" ]]; then
+    style=single-quoted-argument
+  else
+    # If unclosed, i points past the end
+    (( i-- ))
+    style=single-quoted-argument-unclosed
+  fi
+  reply=($(( start_pos + arg1 - 1 )) $(( start_pos + i )) $style $reply)
+  REPLY=$i
+}
+
+# Highlight special chars inside double-quoted strings
+_zsh_highlight_main_highlighter_highlight_double_quote()
+{
+  local -a breaks match mbegin mend saved_reply
+  local MATCH; integer last_break=$(( start_pos + $1 - 1 )) MBEGIN MEND
+  local i j k ret style
+  reply=()
+
+  for (( i = $1 + 1 ; i <= $#arg ; i += 1 )) ; do
+    (( j = i + start_pos - 1 ))
+    (( k = j + 1 ))
+    case "$arg[$i]" in
+      ('"') break;;
+      ('`') saved_reply=($reply)
+            _zsh_highlight_main_highlighter_highlight_backtick $i
+            (( i = REPLY ))
+            reply=($saved_reply $reply)
+            continue
+            ;;
+      ('$') style=dollar-double-quoted-argument
+            # Look for an alphanumeric parameter name.
+            if [[ ${arg:$i} =~ ^([A-Za-z_][A-Za-z0-9_]*|[0-9]+) ]] ; then
+              (( k += $#MATCH )) # highlight the parameter name
+              (( i += $#MATCH )) # skip past it
+            elif [[ ${arg:$i} =~ ^[{]([A-Za-z_][A-Za-z0-9_]*|[0-9]+)[}] ]] ; then
+              (( k += $#MATCH )) # highlight the parameter name and braces
+              (( i += $#MATCH )) # skip past it
+            elif [[ $arg[i+1] == '$' ]]; then
+              # $$ - pid
+              (( k += 1 )) # highlight both dollar signs
+              (( i += 1 )) # don't consider the second one as introducing another parameter expansion
+            elif [[ $arg[i+1] == [-#*@?] ]]; then
+              # $#, $*, $@, $?, $- - like $$ above
+              (( k += 1 )) # highlight both dollar signs
+              (( i += 1 )) # don't consider the second one as introducing another parameter expansion
+            elif [[ $arg[i+1] == $'\x28' ]]; then
+              saved_reply=($reply)
+              if [[ $arg[i+2] == $'\x28' ]] && _zsh_highlight_main_highlighter_highlight_arithmetic $i; then
+                # Arithmetic expansion
+                (( i = REPLY ))
+                reply=($saved_reply $reply)
+                continue
+              fi
+
+              breaks+=( $last_break $(( start_pos + i - 1 )) )
+              (( i += 2 ))
+              _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,-1]
+              ret=$?
+              (( i += REPLY ))
+              last_break=$(( start_pos + i ))
+              reply=(
+                $saved_reply
+                $j $(( start_pos + i )) command-substitution-quoted
+                $j $(( j + 2 )) command-substitution-delimiter-quoted
+                $reply
+              )
+              if (( ret == 0 )); then
+                reply+=($(( start_pos + i - 1 )) $(( start_pos + i )) command-substitution-delimiter-quoted)
+              fi
+              continue
+            else
+              continue
+            fi
+            ;;
+      "\\") style=back-double-quoted-argument
+            if [[ \\\`\"\$${histchars[1]} == *$arg[$i+1]* ]]; then
+              (( k += 1 )) # Color following char too.
+              (( i += 1 )) # Skip parsing the escaped char.
+            else
+              continue
+            fi
+            ;;
+      ($histchars[1]) # ! - may be a history expansion
+            if [[ $arg[i+1] != ('='|$'\x28'|$'\x7b'|[[:blank:]]) ]]; then
+              style=history-expansion
+            else
+              continue
+            fi
+            ;;
+      *) continue ;;
+
+    esac
+    reply+=($j $k $style)
+  done
+
+  if [[ $arg[i] == '"' ]]; then
+    style=double-quoted-argument
+  else
+    # If unclosed, i points past the end
+    (( i-- ))
+    style=double-quoted-argument-unclosed
+  fi
+  (( last_break != start_pos + i )) && breaks+=( $last_break $(( start_pos + i )) )
+  saved_reply=($reply)
+  reply=()
+  for 1 2 in $breaks; do
+    (( $1 != $2 )) && reply+=($1 $2 $style)
+  done
+  reply+=($saved_reply)
+  REPLY=$i
+}
+
+# Highlight special chars inside dollar-quoted strings
+_zsh_highlight_main_highlighter_highlight_dollar_quote()
+{
+  local -a match mbegin mend
+  local MATCH; integer MBEGIN MEND
+  local i j k style
+  local AA
+  integer c
+  reply=()
+
+  for (( i = $1 + 2 ; i <= $#arg ; i += 1 )) ; do
+    (( j = i + start_pos - 1 ))
+    (( k = j + 1 ))
+    case "$arg[$i]" in
+      "'") break;;
+      "\\") style=back-dollar-quoted-argument
+            for (( c = i + 1 ; c <= $#arg ; c += 1 )); do
+              [[ "$arg[$c]" != ([0-9xXuUa-fA-F]) ]] && break
+            done
+            AA=$arg[$i+1,$c-1]
+            # Matching for HEX and OCT values like \0xA6, \xA6 or \012
+            if [[    "$AA" =~ "^(x|X)[0-9a-fA-F]{1,2}"
+                  || "$AA" =~ "^[0-7]{1,3}"
+                  || "$AA" =~ "^u[0-9a-fA-F]{1,4}"
+                  || "$AA" =~ "^U[0-9a-fA-F]{1,8}"
+               ]]; then
+              (( k += $#MATCH ))
+              (( i += $#MATCH ))
+            else
+              if (( $#arg > $i+1 )) && [[ $arg[$i+1] == [xXuU] ]]; then
+                # \x not followed by hex digits is probably an error
+                style=unknown-token
+              fi
+              (( k += 1 )) # Color following char too.
+              (( i += 1 )) # Skip parsing the escaped char.
+            fi
+            ;;
+      *) continue ;;
+
+    esac
+    reply+=($j $k $style)
+  done
+
+  if [[ $arg[i] == "'" ]]; then
+    style=dollar-quoted-argument
+  else
+    # If unclosed, i points past the end
+    (( i-- ))
+    style=dollar-quoted-argument-unclosed
+  fi
+  reply=($(( start_pos + $1 - 1 )) $(( start_pos + i )) $style $reply)
+  REPLY=$i
+}
+
+# Highlight backtick substitutions
+_zsh_highlight_main_highlighter_highlight_backtick()
+{
+  # buf is the contents of the backticks with a layer of backslashes removed.
+  # last is the index of arg for the start of the string to be copied into buf.
+  #     It is either one past the beginning backtick or one past the last backslash.
+  # offset is a count of consumed \ (the delta between buf and arg).
+  # offsets is an array indexed by buf offset of when the delta between buf and arg changes.
+  #     It is sparse, so search backwards to the last value
+  local buf highlight style=back-quoted-argument-unclosed style_end
+  local -i arg1=$1 end_ i=$1 last offset=0 start subshell_has_end=0
+  local -a highlight_zone highlights offsets
+  reply=()
+
+  last=$(( arg1 + 1 ))
+  # Remove one layer of backslashes and find the end
+  while i=$arg[(ib:i+1:)[\\\\\`]]; do # find the next \ or `
+    if (( i > $#arg )); then
+      buf=$buf$arg[last,i]
+      offsets[i-arg1-offset]='' # So we never index past the end
+      (( i-- ))
+      subshell_has_end=$(( has_end && (start_pos + i == len) ))
+      break
+    fi
+
+    if [[ $arg[i] == '\' ]]; then
+      (( i++ ))
+      # POSIX XCU 2.6.3
+      if [[ $arg[i] == ('$'|'`'|'\') ]]; then
+        buf=$buf$arg[last,i-2]
+        (( offset++ ))
+        # offsets is relative to buf, so adjust by -arg1
+        offsets[i-arg1-offset]=$offset
+      else
+        buf=$buf$arg[last,i-1]
+      fi
+    else # it's an unquoted ` and this is the end
+      style=back-quoted-argument
+      style_end=back-quoted-argument-delimiter
+      buf=$buf$arg[last,i-1]
+      offsets[i-arg1-offset]='' # So we never index past the end
+      break
+    fi
+    last=$i
+  done
+
+  _zsh_highlight_main_highlighter_highlight_list 0 '' $subshell_has_end $buf
+
+  # Munge the reply to account for removed backslashes
+  for start end_ highlight in $reply; do
+    start=$(( start_pos + arg1 + start + offsets[(Rb:start:)?*] ))
+    end_=$(( start_pos + arg1 + end_ + offsets[(Rb:end_:)?*] ))
+    highlights+=($start $end_ $highlight)
+    if [[ $highlight == back-quoted-argument-unclosed && $style == back-quoted-argument ]]; then
+      # An inner backtick command substitution is unclosed, but this level is closed
+      style_end=unknown-token
+    fi
+  done
+
+  reply=(
+    $(( start_pos + arg1 - 1 )) $(( start_pos + i )) $style
+    $(( start_pos + arg1 - 1 )) $(( start_pos + arg1 )) back-quoted-argument-delimiter
+    $highlights
+  )
+  if (( $#style_end )); then
+    reply+=($(( start_pos + i - 1)) $(( start_pos + i )) $style_end)
+  fi
+  REPLY=$i
+}
+
+# Highlight special chars inside arithmetic expansions
+_zsh_highlight_main_highlighter_highlight_arithmetic()
+{
+  local -a saved_reply
+  local style
+  integer i j k paren_depth ret
+  reply=()
+
+  for (( i = $1 + 3 ; i <= end_pos - start_pos ; i += 1 )) ; do
+    (( j = i + start_pos - 1 ))
+    (( k = j + 1 ))
+    case "$arg[$i]" in
+      [\'\"\\@{}])
+        style=unknown-token
+        ;;
+      '(')
+        (( paren_depth++ ))
+        continue
+        ;;
+      ')')
+        if (( paren_depth )); then
+          (( paren_depth-- ))
+          continue
+        fi
+        [[ $arg[i+1] == ')' ]] && { (( i++ )); break; }
+        # Special case ) at the end of the buffer to avoid flashing command substitution for a character
+        (( has_end && (len == k) )) && break
+        # This is a single paren and there are no open parens, so this isn't an arithmetic expansion
+        return 1
+        ;;
+      '`')
+        saved_reply=($reply)
+        _zsh_highlight_main_highlighter_highlight_backtick $i
+        (( i = REPLY ))
+        reply=($saved_reply $reply)
+        continue
+        ;;
+      '$' )
+        if [[ $arg[i+1] == $'\x28' ]]; then
+          saved_reply=($reply)
+          if [[ $arg[i+2] == $'\x28' ]] && _zsh_highlight_main_highlighter_highlight_arithmetic $i; then
+            # Arithmetic expansion
+            (( i = REPLY ))
+            reply=($saved_reply $reply)
+            continue
+          fi
+
+          (( i += 2 ))
+          _zsh_highlight_main_highlighter_highlight_list $(( start_pos + i - 1 )) S $has_end $arg[i,end_pos]
+          ret=$?
+          (( i += REPLY ))
+          reply=(
+            $saved_reply
+            $j $(( start_pos + i )) command-substitution-quoted
+            $j $(( j + 2 )) command-substitution-delimiter-quoted
+            $reply
+          )
+          if (( ret == 0 )); then
+            reply+=($(( start_pos + i - 1 )) $(( start_pos + i )) command-substitution-delimiter)
+          fi
+          continue
+        else
+          continue
+        fi
+        ;;
+      ($histchars[1]) # ! - may be a history expansion
+        if [[ $arg[i+1] != ('='|$'\x28'|$'\x7b'|[[:blank:]]) ]]; then
+          style=history-expansion
+        else
+          continue
+        fi
+        ;;
+      *)
+        continue
+        ;;
+
+    esac
+    reply+=($j $k $style)
+  done
+
+  if [[ $arg[i] != ')' ]]; then
+    # If unclosed, i points past the end
+    (( i-- ))
+  fi
+    style=arithmetic-expansion
+  reply=($(( start_pos + $1 - 1)) $(( start_pos + i )) arithmetic-expansion $reply)
+  REPLY=$i
+}
+
+
+# Called with a single positional argument.
+# Perform filename expansion (tilde expansion) on the argument and set $REPLY to the expanded value.
+#
+# Does not perform filename generation (globbing).
+_zsh_highlight_main_highlighter_expand_path()
+{
+  (( $# == 1 )) || print -r -- >&2 "zsh-syntax-highlighting: BUG: _zsh_highlight_main_highlighter_expand_path: called without argument"
+
+  # The $~1 syntax normally performs filename generation, but not when it's on the right-hand side of ${x:=y}.
+  setopt localoptions nonomatch
+  unset REPLY
+  : ${REPLY:=${(Q)${~1}}}
+}
+
+# -------------------------------------------------------------------------------------------------
+# Main highlighter initialization
+# -------------------------------------------------------------------------------------------------
+
+_zsh_highlight_main__precmd_hook() {
+  # Unset the WARN_NESTED_VAR option, taking care not to error if the option
+  # doesn't exist (zsh older than zsh-5.3.1-test-2).
+  setopt localoptions
+  if eval '[[ -o warnnestedvar ]]' 2>/dev/null; then
+    unsetopt warnnestedvar
+  fi
+
+  _zsh_highlight_main__command_type_cache=()
+}
+
+autoload -Uz add-zsh-hook
+if add-zsh-hook precmd _zsh_highlight_main__precmd_hook 2>/dev/null; then
+  # Initialize command type cache
+  typeset -gA _zsh_highlight_main__command_type_cache
+else
+  print -r -- >&2 'zsh-syntax-highlighting: Failed to load add-zsh-hook. Some speed optimizations will not be used.'
+  # Make sure the cache is unset
+  unset _zsh_highlight_main__command_type_cache
+fi
+typeset -ga ZSH_HIGHLIGHT_DIRS_BLACKLIST