@alteriom/painlessmesh 1.8.14 → 1.9.0

package/examples/alteriomPhase2/platformio.ini

@@ -1,26 +0,0 @@
-[platformio]
-src_dir = .
-
-[env]
-lib_deps =
-    bblanchon/ArduinoJson
-    arkhipenko/TaskScheduler
-
-lib_ldf_mode = deep+
-[env:esp8266]
-platform = espressif8266
-board = nodemcuv2
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/ESPAsyncTCP@^2.0.0  ; Only for ESP8266
-
-[env:esp32]
-platform = espressif32
-board = esp32dev
-framework = arduino
-lib_extra_dirs = ../../  ; Load the local copy of painlessmesh. For your own example add painlessmesh to the lib_deps
-lib_deps =
-    ${env.lib_deps}  ; Inherit common dependencies
-    esp32async/AsyncTCP

package/examples/alteriomSensorNode/alteriom_sensor_node.ino

@@ -1,186 +0,0 @@
-//************************************************************
-// Alteriom Sensor Node Example
-//
-// This example demonstrates how to create an Alteriom-specific
-// sensor node using custom packages with painlessMesh
-//************************************************************
-
-#include "painlessTaskOptions.h"  // Must be first to configure TaskScheduler
-#include <TaskScheduler.h>  // Required for LDF to find TaskScheduler dependency
-#include "alteriom_sensor_package.hpp"
-#include "painlessMesh.h"
-
-#define MESH_PREFIX "AlteriomMesh"
-#define MESH_PASSWORD "somethingSneaky"
-#define MESH_PORT 5555
-
-Scheduler userScheduler;  // to control your personal task
-painlessMesh mesh;
-
-// Alteriom package handlers
-using namespace alteriom;
-
-// User stub
-void sendSensorData();
-void handleIncomingPackage(uint32_t from, String& msg);
-void handleCommandPackage(CommandPackage& cmd);
-void handleStatusRequest();
-
-Task taskSendSensorData(30000, TASK_FOREVER, &sendSensorData);
-Task taskSendStatus(60000, TASK_FOREVER, &handleStatusRequest);
-
-void setup() {
-  Serial.begin(115200);
-
-  // Initialize mesh
-  mesh.setDebugMsgTypes(ERROR | MESH_STATUS | CONNECTION | SYNC |
-                        COMMUNICATION | GENERAL | MSG_TYPES | REMOTE);
-  mesh.init(MESH_PREFIX, MESH_PASSWORD, &userScheduler, MESH_PORT);
-  mesh.onReceive(&handleIncomingPackage);
-  mesh.onNewConnection(&newConnectionCallback);
-  mesh.onChangedConnections(&changedConnectionCallback);
-  mesh.onNodeTimeAdjusted(&nodeTimeAdjustedCallback);
-
-  // Add tasks
-  userScheduler.addTask(taskSendSensorData);
-  taskSendSensorData.enable();
-
-  userScheduler.addTask(taskSendStatus);
-  taskSendStatus.enable();
-
-  // Initialize sensors (placeholder)
-  Serial.println("Alteriom Sensor Node initialized");
-}
-
-void loop() { mesh.update(); }
-
-void sendSensorData() {
-  // Create sensor package
-  SensorPackage sensorData;
-  sensorData.from = mesh.getNodeId();
-  sensorData.sensorId = mesh.getNodeId();  // Use node ID as sensor ID
-  sensorData.timestamp = mesh.getNodeTime();
-
-  // Read sensor values (placeholder - replace with actual sensor readings)
-  sensorData.temperature =
-      23.5 + random(-50, 50) / 10.0;  // Simulate temperature
-  sensorData.humidity = 45.0 + random(-100, 100) / 10.0;   // Simulate humidity
-  sensorData.pressure = 1013.25 + random(-50, 50) / 10.0;  // Simulate pressure
-  sensorData.batteryLevel = 85 + random(-20, 15);          // Simulate battery
-
-  // Serialize and send
-  JsonDocument doc;
-  JsonObject obj = doc.to<JsonObject>();
-  sensorData.addTo(std::move(obj));
-
-  String msg;
-  serializeJson(doc, msg);
-  mesh.sendBroadcast(msg);
-
-  Serial.printf("Sent sensor data: T=%.1f, H=%.1f, P=%.1f, Bat=%d%%\n",
-                sensorData.temperature, sensorData.humidity,
-                sensorData.pressure, sensorData.batteryLevel);
-}
-
-void handleStatusRequest() {
-  StatusPackage status;
-  status.from = mesh.getNodeId();
-  status.deviceStatus = 0x01;  // Device operational
-  status.uptime = millis() / 1000;
-  status.freeMemory = ESP.getFreeHeap() / 1024;  // KB
-  status.wifiStrength = 75;                      // Placeholder
-  status.firmwareVersion = "1.0.0-alteriom";
-
-  // Serialize and send
-  JsonDocument doc;
-  JsonObject obj = doc.to<JsonObject>();
-  status.addTo(std::move(obj));
-
-  String msg;
-  serializeJson(doc, msg);
-  mesh.sendBroadcast(msg);
-
-  Serial.printf("Sent status: uptime=%ds, mem=%dKB\n", status.uptime,
-                status.freeMemory);
-}
-
-void handleIncomingPackage(uint32_t from, String& msg) {
-  Serial.printf("Received from %u: %s\n", from, msg.c_str());
-
-  // Parse the JSON message
-  JsonDocument doc;
-  deserializeJson(doc, msg);
-  JsonObject obj = doc.as<JsonObject>();
-
-  // Check message type
-  uint8_t msgType = obj["type"];
-
-  switch (msgType) {
-    case 200:  // SensorPackage
-    {
-      SensorPackage receivedSensor(obj);
-      Serial.printf("Sensor data from %u: T=%.1f, H=%.1f\n",
-                    receivedSensor.from, receivedSensor.temperature,
-                    receivedSensor.humidity);
-      // Process sensor data (store, forward, analyze, etc.)
-    } break;
-
-    case 400:  // CommandPackage
-    {
-      CommandPackage receivedCmd(obj);
-      if (receivedCmd.dest == mesh.getNodeId()) {
-        handleCommandPackage(receivedCmd);
-      }
-    } break;
-
-    case 202:  // StatusPackage
-    {
-      StatusPackage receivedStatus(obj);
-      Serial.printf("Status from %u: uptime=%ds, mem=%dKB, fw=%s\n",
-                    receivedStatus.from, receivedStatus.uptime,
-                    receivedStatus.freeMemory,
-                    receivedStatus.firmwareVersion.c_str());
-    } break;
-
-    default:
-      Serial.printf("Unknown message type: %d\n", msgType);
-      break;
-  }
-}
-
-void handleCommandPackage(CommandPackage& cmd) {
-  Serial.printf("Received command %d for device %u\n", cmd.command,
-                cmd.targetDevice);
-
-  // Process different command types
-  switch (cmd.command) {
-    case 1:  // Reset command
-      Serial.println("Reset command received");
-      // Implement reset logic
-      break;
-
-    case 2:  // Configuration update
-      Serial.printf("Config update: %s\n", cmd.parameters.c_str());
-      // Parse and apply configuration
-      break;
-
-    case 3:  // Data request
-      Serial.println("Data request received");
-      sendSensorData();  // Send current sensor data
-      break;
-
-    default:
-      Serial.printf("Unknown command: %d\n", cmd.command);
-      break;
-  }
-}
-
-void newConnectionCallback(uint32_t nodeId) {
-  Serial.printf("New Connection, nodeId = %u\n", nodeId);
-}
-
-void changedConnectionCallback() { Serial.printf("Changed connections\n"); }
-
-void nodeTimeAdjustedCallback(int32_t offset) {
-  Serial.printf("Adjusted time %u. Offset = %d\n", mesh.getNodeTime(), offset);
-}