@alteriom/painlessmesh 1.8.14 → 1.9.0

package/docs/releases/RELEASE_NOTES_v1.8.6.md

@@ -1,205 +0,0 @@
-# painlessMesh v1.8.6 Release Notes
-
-**Release Date:** November 12, 2025  
-**Type:** Patch Release  
-**Breaking Changes:** None - 100% Backward Compatible
-
----
-
-## 🎯 Executive Summary
-
-Version 1.8.6 fixes a critical issue in the bridge failover mechanism where mesh networks would remain bridgeless indefinitely when all nodes started without a designated initial bridge. This release introduces automatic bridge election monitoring that ensures meshes always establish internet connectivity when configured for bridge failover.
-
----
-
-## 🐛 Bug Fixes
-
-### Bridge Failover Auto-Election (Issue #117)
-
-**Problem:** The bridge failover example didn't work when all nodes had `INITIAL_BRIDGE=false`. The mesh would start but never elect a bridge, leaving the network without internet connectivity indefinitely.
-
-**Symptoms:**
-```
---- Bridge Status ---
-I am bridge: NO
-Internet available: NO
-Known bridges: 0
-No primary bridge available!
---------------------
-```
-
-**Root Cause:** Bridge elections only triggered when an *existing* bridge lost connectivity. When the mesh had no bridge from startup, no election was ever initiated.
-
-**Solution:** Added periodic monitoring task (30-second interval) that:
-- Detects absence of healthy bridges in the mesh
-- Triggers bridge election after 60-second startup grace period
-- Uses randomized election delay (1-3 seconds) to prevent thundering herd
-- Respects all existing safeguards (election state, cooldown, router visibility)
-
-**Behavior Changes:**
-
-| Scenario | Before v1.8.6 | After v1.8.6 |
-|----------|---------------|--------------|
-| No initial bridge | Mesh stays bridgeless forever | Election triggered after 60s, best RSSI node becomes bridge |
-| Pre-designated bridge | Works normally | Works normally (unchanged) |
-| Bridge failure | Election triggered | Election triggered (unchanged) |
-
-**Backward Compatibility:** Fully backward compatible. Pre-designated bridge mode continues to work exactly as before.
-
-**Core Changes:** `src/arduino/wifi.hpp`
-
----
-
-## 📝 Documentation Improvements
-
-### Bridge Failover Example Clarification
-
-Enhanced documentation for `examples/bridge_failover/` to clearly explain two deployment modes:
-
-**Auto-Election Mode** (New Documentation)
-- All nodes start with `INITIAL_BRIDGE=false`
-- After 60-second startup grace period, monitoring begins
-- Best RSSI node automatically elected as bridge
-- Ideal for dynamic deployments where optimal bridge selection matters
-
-**Pre-Designated Mode** (Existing)
-- One node starts with `INITIAL_BRIDGE=true`
-- Traditional setup with guaranteed initial bridge
-- Ideal for fixed deployments with known bridge location
-
-Updated files:
-- `examples/bridge_failover/bridge_failover.ino` - Enhanced header comments
-- `examples/bridge_failover/README.md` - Comprehensive mode documentation
-
----
-
-## 🔧 Housekeeping
-
-- Synchronized `package-lock.json` version to 1.8.5
-
----
-
-## 🔄 Upgrade Guide
-
-### From v1.8.5 to v1.8.6
-
-This is a seamless upgrade with no breaking changes:
-
-1. **Update Package Version:**
-   ```bash
-   # PlatformIO
-   pio pkg update alteriom/AlteriomPainlessMesh@^1.8.6
-   
-   # NPM
-   npm update @alteriom/painlessmesh
-   
-   # Arduino Library Manager
-   # Update through IDE's Library Manager
-   ```
-
-2. **No Code Changes Required** - All existing code works without modification
-
-3. **Optional: Enable Auto-Election Mode**
-   ```cpp
-   // For auto-election mode, set all nodes to:
-   #define INITIAL_BRIDGE false
-   
-   // Network will automatically elect bridge after 60s startup
-   ```
-
----
-
-## 🎯 Use Cases
-
-This release is particularly valuable for:
-
-### 1. Dynamic Mesh Networks
-- Mobile or portable mesh deployments
-- Networks where node positions change
-- Optimal bridge selection based on WiFi signal strength
-
-### 2. Fault-Tolerant Deployments
-- Meshes that must establish connectivity without manual intervention
-- Systems requiring automatic bridge recovery
-- IoT deployments with minimal human oversight
-
-### 3. Development & Testing
-- Quick prototyping without pre-configuring bridge nodes
-- Testing scenarios with varying network topologies
-- Validation of bridge election algorithms
-
----
-
-## 📊 Technical Details
-
-### Monitoring Task Implementation
-
-```cpp
-// Periodic check every 30 seconds
-this->addTask(30000, TASK_FOREVER, [this]() {
-  // Skip if: not enabled, already bridge, or in startup grace period
-  if (!bridgeFailoverEnabled || !routerCredentialsConfigured) return;
-  if (this->isBridge() || millis() < 60000) return;
-  
-  // Check for healthy bridge
-  bool hasHealthyBridge = false;
-  for (const auto& bridge : this->getBridges()) {
-    if (bridge.isHealthy(bridgeTimeoutMs) && bridge.internetConnected) {
-      hasHealthyBridge = true;
-      break;
-    }
-  }
-  
-  // Trigger election with randomized delay if no bridge found
-  if (!hasHealthyBridge) {
-    uint32_t delay = random(1000, 3000);
-    this->addTask(delay, TASK_ONCE, [this]() {
-      this->startBridgeElection();
-    });
-  }
-});
-```
-
-### Safeguards
-
-1. **60-second startup grace period** - Allows network to stabilize
-2. **Randomized election delay** - Prevents simultaneous elections
-3. **Respects election state** - Won't trigger if election already in progress
-4. **Cooldown period** - Enforces 60-second minimum between elections
-5. **Router visibility check** - Only nodes that can see router participate
-
----
-
-## 🙏 Credits
-
-Special thanks to @woodlist for reporting Issue #117 and providing detailed logs that helped identify the root cause.
-
----
-
-## 📦 Distribution
-
-This release is available through:
-- **GitHub Releases**: [v1.8.6](https://github.com/Alteriom/painlessMesh/releases/tag/v1.8.6)
-- **NPM**: `npm install @alteriom/painlessmesh@1.8.6`
-- **PlatformIO**: `alteriom/AlteriomPainlessMesh@^1.8.6`
-- **Arduino Library Manager**: Search for "AlteriomPainlessMesh"
-
----
-
-## 📚 Additional Resources
-
-- [Bridge Failover Example](https://github.com/Alteriom/painlessMesh/tree/main/examples/bridge_failover)
-- [Bridge Failover Documentation](https://github.com/Alteriom/painlessMesh/blob/main/examples/bridge_failover/README.md)
-- [Issue #117 - Bug Report](https://github.com/Alteriom/painlessMesh/issues/117)
-- [Pull Request #118 - Implementation](https://github.com/Alteriom/painlessMesh/pull/118)
-- [Full Changelog](https://github.com/Alteriom/painlessMesh/blob/main/CHANGELOG.md)
-
----
-
-## 🐛 Found a Bug?
-
-Please report issues at: https://github.com/Alteriom/painlessMesh/issues
-
----
-
-**Full Changelog**: [v1.8.5...v1.8.6](https://github.com/Alteriom/painlessMesh/compare/v1.8.5...v1.8.6)

package/docs/releases/RELEASE_NOTES_v1.8.7.md

@@ -1,184 +0,0 @@
-# Release Notes - Version 1.8.7
-
-**Release Date:** November 12, 2025  
-**Release Type:** Patch Release  
-**Focus:** Bug fixes and documentation improvements
-
-## 🐛 Bug Fixes
-
-### Bridge Internet Connectivity Detection
-
-**Issue:** Bridge nodes were incorrectly reporting internet connectivity status.
-
-**Problem:**
-- Bridge connected to router would report "Internet: NO" even when the router had internet
-- The `hasInternetConnection()` function was returning false positives on regular nodes
-- Only checked WiFi connection status, not actual internet connectivity
-
-**Solution:**
-- Enhanced connectivity check to verify both WiFi status AND valid gateway IP
-- Check now verifies `WiFi.status() == WL_CONNECTED` AND gateway IP is not 0.0.0.0
-- Regular nodes without WiFi connection correctly report no internet
-
-**Impact:**
-- Bridge failover logic now works correctly
-- Internet connectivity status is accurate
-- Better network topology awareness
-
-**Files Modified:**
-- `src/arduino/wifi.hpp` (lines 1188-1192)
-- `examples/bridge_failover/README.md` (added troubleshooting)
-
-**Before:**
-```
-Bridge → Router (with Internet) → Reports: "Internet: NO" ❌
-```
-
-**After:**
-```
-Bridge → Router (with Internet) → Reports: "Internet: YES" ✅
-```
-
-### Version Documentation Consistency
-
-**Issue:** Header file version comments were out of sync with library version, causing user confusion.
-
-**Problem:**
-- `painlessMesh.h` showed version 1.8.4 in header comment
-- `AlteriomPainlessMesh.h` showed version 1.6.1 in version defines
-- Library files showed version 1.8.6
-- Users were confused about whether files had been modified since those versions
-
-**Solution:**
-- Updated `painlessMesh.h` header comment to version 1.8.7
-- Updated `AlteriomPainlessMesh.h` version defines to 1.8.7
-- Created comprehensive VERSION_MANAGEMENT.md documentation
-- Clarified that header versions reflect library version, not file-specific versioning
-- Added version management guidance to RELEASE_GUIDE.md
-
-**Impact:**
-- Clear documentation about version management
-- No more confusion about header file versions
-- Established best practices for version comments
-
-**Files Modified:**
-- `src/painlessMesh.h`
-- `src/AlteriomPainlessMesh.h`
-- `docs/VERSION_MANAGEMENT.md` (new)
-- `RELEASE_GUIDE.md` (enhanced)
-
-**Documentation Added:**
-- Explains version comment purpose and meaning
-- Clarifies difference between library version and file modification history
-- Provides best practices for version management
-- Documents the complete version update process
-
-## 📚 Documentation Improvements
-
-### New Documentation
-
-1. **VERSION_MANAGEMENT.md**
-   - Comprehensive guide to version management
-   - Explains version comment purpose
-   - Clarifies common questions
-   - Documents version update workflow
-   - Best practices for version comments
-
-### Enhanced Documentation
-
-1. **RELEASE_GUIDE.md**
-   - Added reference to VERSION_MANAGEMENT.md
-   - Updated release process to include header version updates
-   - Clarified version management workflow
-
-2. **bridge_failover/README.md**
-   - Added troubleshooting for internet connectivity issues
-   - Explained the enhanced connectivity detection
-
-## 🔄 Migration Guide
-
-No breaking changes. This release is fully backward compatible with version 1.8.6.
-
-### For Users
-
-**No action required.** Simply update to version 1.8.7:
-
-**Arduino Library Manager:**
-```
-Sketch → Include Library → Manage Libraries → Search "AlteriomPainlessMesh" → Update
-```
-
-**PlatformIO:**
-```ini
-[env:myenv]
-lib_deps = 
-    alteriom/AlteriomPainlessMesh@^1.8.7
-```
-
-**NPM:**
-```bash
-npm update @alteriom/painlessmesh
-```
-
-### For Contributors
-
-**When releasing future versions:**
-1. Update header file version comments to match library version
-2. Follow the VERSION_MANAGEMENT.md guidelines
-3. Use the enhanced release process in RELEASE_GUIDE.md
-
-## 📊 Technical Details
-
-### Files Changed
-- `src/painlessMesh.h` - Version comment updated
-- `src/AlteriomPainlessMesh.h` - Version defines updated
-- `src/arduino/wifi.hpp` - Internet connectivity detection fixed
-- `examples/bridge_failover/README.md` - Troubleshooting added
-- `docs/VERSION_MANAGEMENT.md` - New documentation
-- `RELEASE_GUIDE.md` - Version management guidance added
-- `CHANGELOG.md` - Release notes added
-- `library.properties` - Version 1.8.7
-- `library.json` - Version 1.8.7
-- `package.json` - Version 1.8.7
-
-### Testing
-
-All existing tests pass. No new tests required as changes are:
-- Documentation updates
-- Bug fixes to existing functionality
-- Version comment updates
-
-### Compatibility
-
-- ✅ **ESP32**: All variants supported
-- ✅ **ESP8266**: All variants supported
-- ✅ **Arduino Core 2.x**: Fully compatible
-- ✅ **Arduino Core 3.x**: Fully compatible
-- ✅ **PlatformIO**: All platforms supported
-
-## 🙏 Acknowledgments
-
-**Issue Reporter:**
-- User question about version comments in painlessMesh.h
-
-**Contributors:**
-- @Alteriom - Bug fixes and documentation
-
-## 📖 Related Resources
-
-- **VERSION_MANAGEMENT.md** - Complete version management guide
-- **RELEASE_GUIDE.md** - Release process documentation
-- **CHANGELOG.md** - Complete version history
-- **GitHub Issues** - [Report issues](https://github.com/Alteriom/painlessMesh/issues)
-
-## 🔗 Links
-
-- **GitHub Release:** https://github.com/Alteriom/painlessMesh/releases/tag/v1.8.7
-- **NPM Package:** https://www.npmjs.com/package/@alteriom/painlessmesh
-- **PlatformIO:** https://registry.platformio.org/libraries/alteriom/AlteriomPainlessMesh
-- **Documentation:** https://alteriom.github.io/painlessMesh/
-
----
-
-**Previous Release:** [v1.8.6](RELEASE_NOTES_v1.8.6.md) - November 12, 2025  
-**Next Release:** TBD