@alicloud/cms20190101 4.0.9 → 4.0.10

package/src/models/PutResourceMetricRuleRequest.ts

@@ -5,22 +5,22 @@ import * as $dara from '@darabonba/typescript';
 export class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model {
   /**
    * @remarks
-   * The operator that is used to compare the metric value with the threshold for Critical-level alerts. Valid value:
+   * Critical级别阈值比较符。取值：
    * 
-   * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-   * *   GreaterThanThreshold: greater than the threshold
-   * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-   * *   LessThanThreshold: less than the threshold
-   * *   NotEqualToThreshold: not equal to the threshold
-   * *   EqualToThreshold: equal to the threshold
-   * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-   * *   LessThanYesterday: less than the metric value at the same time yesterday
-   * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-   * *   LessThanLastWeek: less than the metric value at the same time last week
-   * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-   * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+   * - GreaterThanOrEqualToThreshold：大于等于。
+   * - GreaterThanThreshold：大于。
+   * - LessThanOrEqualToThreshold：小于等于。
+   * - LessThanThreshold：小于。
+   * - NotEqualToThreshold：不等于。
+   * - EqualToThreshold：等于。
+   * - GreaterThanYesterday：同比昨天时间上涨。
+   * - LessThanYesterday：同比昨天时间下降。
+   * - GreaterThanLastWeek：同比上周同一时间上涨。
+   * - LessThanLastWeek：同比上周同一时间下降。
+   * - GreaterThanLastPeriod：环比上周期上涨。
+   * - LessThanLastPeriod：环比上周期下降。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * GreaterThanOrEqualToThreshold
@@ -28,11 +28,11 @@ export class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model
   comparisonOperator?: string;
   /**
    * @remarks
-   * The statistical methods for Critical-level alerts.
+   * Critical级别报警统计方法。
    * 
-   * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * Average
@@ -40,9 +40,10 @@ export class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model
   statistics?: string;
   /**
    * @remarks
-   * The threshold for Critical-level alerts.
+   * Critical级别报警阈值。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * 
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 90
@@ -50,9 +51,9 @@ export class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model
   threshold?: string;
   /**
    * @remarks
-   * The consecutive number of times for which the metric value meets the alert condition before a Critical-level alert is triggered.
+   * Critical级别报警重试次数。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 3
@@ -88,22 +89,22 @@ export class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model
 export class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
   /**
    * @remarks
-   * The operator that is used to compare the metric value with the threshold for Info-level alerts. Valid value:
+   * Info级别阈值比较符。取值：
    * 
-   * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-   * *   GreaterThanThreshold: greater than the threshold
-   * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-   * *   LessThanThreshold: less than the threshold
-   * *   NotEqualToThreshold: not equal to the threshold
-   * *   EqualToThreshold: equal to the threshold
-   * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-   * *   LessThanYesterday: less than the metric value at the same time yesterday
-   * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-   * *   LessThanLastWeek: less than the metric value at the same time last week
-   * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-   * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+   * - GreaterThanOrEqualToThreshold：大于等于。
+   * - GreaterThanThreshold：大于。
+   * - LessThanOrEqualToThreshold：小于等于。
+   * - LessThanThreshold：小于。
+   * - NotEqualToThreshold：不等于。
+   * - EqualToThreshold：等于。
+   * - GreaterThanYesterday：同比昨天时间上涨。
+   * - LessThanYesterday：同比昨天时间下降。
+   * - GreaterThanLastWeek：同比上周同一时间上涨。
+   * - LessThanLastWeek：同比上周同一时间下降。
+   * - GreaterThanLastPeriod：环比上周期上涨。
+   * - LessThanLastPeriod：环比上周期下降。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * GreaterThanOrEqualToThreshold
@@ -111,11 +112,11 @@ export class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
   comparisonOperator?: string;
   /**
    * @remarks
-   * The statistical methods for Info-level alerts.
+   * Info级别报警统计方法。
    * 
-   * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * Average
@@ -123,9 +124,9 @@ export class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
   statistics?: string;
   /**
    * @remarks
-   * The threshold for Info-level alerts.
+   * Info级别报警阈值。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 90
@@ -133,9 +134,9 @@ export class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
   threshold?: string;
   /**
    * @remarks
-   * The consecutive number of times for which the metric value meets the alert condition before an Info-level alert is triggered.
+   * Info级别报警重试次数。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 3
@@ -171,22 +172,22 @@ export class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
 export class PutResourceMetricRuleRequestEscalationsWarn extends $dara.Model {
   /**
    * @remarks
-   * The operator that is used to compare the metric value with the threshold for Warn-level alerts. Valid value:
+   * Warn级别阈值比较符。取值：
    * 
-   * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-   * *   GreaterThanThreshold: greater than the threshold
-   * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-   * *   LessThanThreshold: less than the threshold
-   * *   NotEqualToThreshold: not equal to the threshold
-   * *   EqualToThreshold: equal to the threshold
-   * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-   * *   LessThanYesterday: less than the metric value at the same time yesterday
-   * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-   * *   LessThanLastWeek: less than the metric value at the same time last week
-   * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-   * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+   * - GreaterThanOrEqualToThreshold：大于等于。
+   * - GreaterThanThreshold：大于。
+   * - LessThanOrEqualToThreshold：小于等于。
+   * - LessThanThreshold：小于。
+   * - NotEqualToThreshold：不等于。
+   * - EqualToThreshold：等于。
+   * - GreaterThanYesterday：同比昨天时间上涨。
+   * - LessThanYesterday：同比昨天时间下降。
+   * - GreaterThanLastWeek：同比上周同一时间上涨。
+   * - LessThanLastWeek：同比上周同一时间下降。
+   * - GreaterThanLastPeriod：环比上周期上涨。
+   * - LessThanLastPeriod：环比上周期下降。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * GreaterThanOrEqualToThreshold
@@ -194,11 +195,11 @@ export class PutResourceMetricRuleRequestEscalationsWarn extends $dara.Model {
   comparisonOperator?: string;
   /**
    * @remarks
-   * The statistical methods for Warn-level alerts.
+   * Warn级别报警统计方法。
    * 
-   * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * Average
@@ -206,9 +207,8 @@ export class PutResourceMetricRuleRequestEscalationsWarn extends $dara.Model {
   statistics?: string;
   /**
    * @remarks
-   * The threshold for Warn-level alerts.
-   * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * Warn级别报警阈值。
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 90
@@ -216,9 +216,9 @@ export class PutResourceMetricRuleRequestEscalationsWarn extends $dara.Model {
   threshold?: string;
   /**
    * @remarks
-   * The consecutive number of times for which the metric value meets the alert condition before a Warn-level alert is triggered.
+   * Warn级别报警重试次数。
    * 
-   * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+   * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
    * 
    * @example
    * 3
@@ -292,20 +292,20 @@ export class PutResourceMetricRuleRequestEscalations extends $dara.Model {
 export class PutResourceMetricRuleRequestCompositeExpressionExpressionList extends $dara.Model {
   /**
    * @remarks
-   * The operator that is used to compare the metric value with the threshold. Valid value:
+   * The comparison operator for the threshold. Valid values:
    * 
-   * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-   * *   GreaterThanThreshold: greater than the threshold
-   * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-   * *   LessThanThreshold: less than the threshold
-   * *   NotEqualToThreshold: not equal to the threshold
-   * *   EqualToThreshold: equal to the threshold
-   * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-   * *   LessThanYesterday: less than the metric value at the same time yesterday
-   * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-   * *   LessThanLastWeek: less than the metric value at the same time last week
-   * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-   * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+   * - GreaterThanOrEqualToThreshold: greater than or equal to the threshold.
+   * - GreaterThanThreshold: greater than the threshold.
+   * - LessThanOrEqualToThreshold: less than or equal to the threshold.
+   * - LessThanThreshold: less than the threshold.
+   * - NotEqualToThreshold: not equal to the threshold.
+   * - EqualToThreshold: equal to the threshold.
+   * - GreaterThanYesterday: greater than the value at the same time yesterday.
+   * - LessThanYesterday: less than the value at the same time yesterday.
+   * - GreaterThanLastWeek: greater than the value at the same time last week.
+   * - LessThanLastWeek: less than the value at the same time last week.
+   * - GreaterThanLastPeriod: greater than the value in the last period.
+   * - LessThanLastPeriod: less than the value in the last period.
    * 
    * @example
    * GreaterThanOrEqualToThreshold
@@ -313,7 +313,7 @@ export class PutResourceMetricRuleRequestCompositeExpressionExpressionList exten
   comparisonOperator?: string;
   /**
    * @remarks
-   * The metric that is used to monitor the cloud service.
+   * The metric name of the Alibaba Cloud service.
    * 
    * @example
    * cpu_total
@@ -331,14 +331,13 @@ export class PutResourceMetricRuleRequestCompositeExpressionExpressionList exten
   period?: number;
   /**
    * @remarks
-   * The statistical method of the metric. Valid value:
+   * The statistical method of the metric. Valid values:
+   * - $Maximum: maximum value.
+   * - $Minimum: minimum value.
+   * - $Average: average value.
+   * - $Availability: active rate (typically used for site monitoring).
    * 
-   * *   $Maximum: the maximum value
-   * *   $Minimum: the minimum value
-   * *   $Average: the average value
-   * *   $Availability: the availability rate (usually used for site monitoring)
-   * 
-   * >  `$` is the prefix of the metric. For information about the Alibaba Cloud services that are supported by CloudMonitor, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * > `$` is the unified prefix for metrics. For information about supported Alibaba Cloud services, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * $Maximum
@@ -384,15 +383,16 @@ export class PutResourceMetricRuleRequestCompositeExpressionExpressionList exten
 export class PutResourceMetricRuleRequestCompositeExpression extends $dara.Model {
   /**
    * @remarks
-   * The trigger conditions that are created in standard mode.
+   * The list of alert conditions created in standard mode.
    */
   expressionList?: PutResourceMetricRuleRequestCompositeExpressionExpressionList[];
   /**
    * @remarks
-   * The relationship between the trigger conditions for multiple metrics. Valid value:
+   * The relationship between multi-metric alert conditions. Valid values: 
+   * 
+   * - `&&`: An alert is triggered only when all metrics meet the alert conditions. An alert is triggered only when all expressions in ExpressionList evaluate to `true`.
    * 
-   * *   `&&`: An alert is triggered only if all metrics meet the trigger conditions. An alert is triggered only if the results of all expressions specified in the ExpressionList parameter are `true`.
-   * *   `||`: An alert is triggered if one of the metrics meets the trigger conditions.
+   * - `||`: An alert is triggered when any metric meets the alert conditions.
    * 
    * @example
    * ||
@@ -400,11 +400,11 @@ export class PutResourceMetricRuleRequestCompositeExpression extends $dara.Model
   expressionListJoin?: string;
   /**
    * @remarks
-   * The trigger conditions that are created by using expressions. You can use expressions to create trigger conditions in the following scenarios:
+   * The alert condition created by using an expression. The following scenarios are supported:
    * 
-   * *   Set an alert blacklist for specific resources. For example, if you specify `$instanceId != \\"i-io8kfvcpp7x5****\\" ``&&`` $Average > 50`, no alert is triggered when the `average metric value` of the `i-io8kfvcpp7x5****` instance exceeds 50.
-   * *   Set a special alert threshold for a specified instance in the rule. For example, if you specify `$Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)`, an alert is triggered when the `average metric value` of the `i-io8kfvcpp7x5****` instance exceeds 80 or the `average metric value` of other instances exceeds 50.
-   * *   Limit the number of instances whose metric values exceed the threshold. For example, if you specify `count($Average > 20) > 3`, an alert is triggered only when the `average metric value` of more than three instances exceeds 20.
+   * - Set an alert blacklist for specific resources. For example, `$instanceId != \\"i-io8kfvcpp7x5****\\" ``&&`` $Average > 50` specifies that no alert is triggered for instance `i-io8kfvcpp7x5****` even if its `Average` exceeds 50.
+   * - Set a special alert threshold for a specific instance in the rule. For example, `$Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)` specifies that an alert is triggered for instance `i-io8kfvcpp7x5****` only when its `Average` exceeds 80, while an alert is triggered for other instances when their `Average` exceeds 50.
+   * - Limit the number of instances that exceed the threshold. For example, `count($Average > 20) > 3` specifies that an alert is triggered only when more than three instances have an `Average` greater than 20.
    * 
    * @example
    * $Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)
@@ -413,18 +413,17 @@ export class PutResourceMetricRuleRequestCompositeExpression extends $dara.Model
   /**
    * @remarks
    * The alert level. Valid values:
-   * 
-   * *   Critical
-   * *   Warn
-   * *   Info
+   * - CRITICAL: critical.
+   * - WARN: warning.
+   * - INFO: information.
    * 
    * @example
-   * Critical
+   * CRITICAL
    */
   level?: string;
   /**
    * @remarks
-   * The number of consecutive triggers. If the number of times that the metric values meet the trigger conditions reaches the value of this parameter, CloudMonitor sends alert notifications.
+   * The number of times that the alert condition must be met before an alert notification is sent.
    * 
    * @example
    * 3
@@ -465,7 +464,7 @@ export class PutResourceMetricRuleRequestCompositeExpression extends $dara.Model
 export class PutResourceMetricRuleRequestLabels extends $dara.Model {
   /**
    * @remarks
-   * The tag key.
+   * The label key.
    * 
    * @example
    * tagKey1
@@ -473,9 +472,9 @@ export class PutResourceMetricRuleRequestLabels extends $dara.Model {
   key?: string;
   /**
    * @remarks
-   * The tag value.
+   * The label value.
    * 
-   * >  You can use a template parameter to specify a tag value. CloudMonitor replaces the value of the template parameter with an actual tag value.
+   * > The label value supports template parameters. Template parameters are replaced with actual label values.
    * 
    * @example
    * ECS
@@ -507,7 +506,7 @@ export class PutResourceMetricRuleRequestLabels extends $dara.Model {
 export class PutResourceMetricRuleRequestPrometheusAnnotations extends $dara.Model {
   /**
    * @remarks
-   * The key of the annotation.
+   * The annotation key.
    * 
    * @example
    * summary
@@ -515,7 +514,7 @@ export class PutResourceMetricRuleRequestPrometheusAnnotations extends $dara.Mod
   key?: string;
   /**
    * @remarks
-   * The value of the annotation.
+   * The annotation value.
    * 
    * @example
    * {{ $labels.instance }} CPU usage above 10% {current value: {{ humanizePercentage $value }} }
@@ -547,28 +546,27 @@ export class PutResourceMetricRuleRequestPrometheusAnnotations extends $dara.Mod
 export class PutResourceMetricRuleRequestPrometheus extends $dara.Model {
   /**
    * @remarks
-   * The annotations of the Prometheus alert rule. When a Prometheus alert is triggered, the system renders the annotated keys and values to help you understand the metrics and alert rule.
+   * The annotations for Prometheus alerting. The annotation keys and values are rendered to help you understand the metric or alert rule.
    * 
-   * >  This parameter is equivalent to the annotations parameter of open source Prometheus.
+   * > This feature is equivalent to the Annotation feature in Prometheus.
    */
   annotations?: PutResourceMetricRuleRequestPrometheusAnnotations[];
   /**
    * @remarks
    * The alert level. Valid values:
-   * 
-   * *   Critical
-   * *   Warn
-   * *   Info
+   * - CRITICAL: critical.
+   * - WARN: warning.
+   * - INFO: information.
    * 
    * @example
-   * Critical
+   * CRITICAL
    */
   level?: string;
   /**
    * @remarks
-   * PromQL statements are supported.
+   * The PromQL query statement.
    * 
-   * >  The data obtained by using the PromQL query statement is the monitoring data. You must include the alert threshold in this statement.
+   * > The data obtained by the PromQL query statement is the alert data. Include the alert threshold in this statement.
    * 
    * @example
    * cpuUsage{instanceId="xxxx"}[1m]>90
@@ -576,7 +574,7 @@ export class PutResourceMetricRuleRequestPrometheus extends $dara.Model {
   promQL?: string;
   /**
    * @remarks
-   * The number of consecutive triggers. If the number of times that the metric values meet the trigger conditions reaches the value of this parameter, CloudMonitor sends alert notifications.
+   * The number of times that the alert condition must be met before an alert notification is sent.
    * 
    * @example
    * 3
@@ -616,16 +614,16 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   escalations?: PutResourceMetricRuleRequestEscalations;
   /**
    * @remarks
-   * The trigger conditions for multiple metrics.
+   * The alert conditions for multiple metrics.
    * 
-   * >  The trigger conditions for a single metric and multiple metrics are mutually exclusive. You cannot specify trigger conditions for a single metric and multiple metrics at the same time.
+   * > Single-metric and multi-metric alert conditions are mutually exclusive and cannot be set at the same time.
    */
   compositeExpression?: PutResourceMetricRuleRequestCompositeExpression;
   /**
    * @remarks
-   * The alert contact groups. Alert notifications are sent to the alert contacts in the alert contact group.
+   * The alert contact group. Alert notifications are sent to the alert contacts in this alert contact group.
    * 
-   * >  An alert contact group can contain one or more alert contacts. For information about how to create alert contacts and alert contact groups, see [PutContact](https://help.aliyun.com/document_detail/114923.html) and [PutContactGroup](https://help.aliyun.com/document_detail/114929.html).
+   * > An alert contact group contains one or more alert contacts. For information about how to create alert contacts and alert contact groups, see [PutContact](https://help.aliyun.com/document_detail/114923.html) and [PutContactGroup](https://help.aliyun.com/document_detail/114929.html).
    * 
    * This parameter is required.
    * 
@@ -635,7 +633,7 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   contactGroups?: string;
   /**
    * @remarks
-   * The period of time during which the alert rule is effective.
+   * The effective period of the alert rule.
    * 
    * @example
    * 00:00-23:59
@@ -643,14 +641,17 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   effectiveInterval?: string;
   /**
    * @remarks
-   * The subject of the alert notification email.
+   * The subject of the alert email.
+   * 
+   * @example
+   * ECS instance alert
    */
   emailSubject?: string;
   /**
    * @remarks
-   * The interval at which alerts are triggered based on the alert rule. Unit: seconds.
+   * The trigger period of the alert rule. Unit: seconds.
    * 
-   * >  For more information about how to query the statistical periods of metrics, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * > For information about how to query the statistical period of a metric, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * 60
@@ -658,16 +659,16 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   interval?: string;
   /**
    * @remarks
-   * If the metric meets the specified condition in the alert rule and CloudMonitor sends an alert notification, the tag is also written to the metric and displayed in the alert notification.
+   * The labels that are written to the metric and displayed in alert notifications when the metric meets the alert condition.
    * 
-   * >  This parameter is equivalent to the Label parameter of Prometheus alerts.
+   * > This feature is the same as the Label feature in Prometheus alerting.
    */
   labels?: PutResourceMetricRuleRequestLabels[];
   /**
    * @remarks
-   * The metric name. For more information about how to query metric names, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * The name of the metric. For information about how to query metric names, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
-   * >  If you create a Prometheus alert rule for Hybrid Cloud Monitoring, you must set this parameter to the name of the namespace. For more information about how to query the names of namespaces, see [DescribeHybridMonitorNamespaceList](https://help.aliyun.com/document_detail/428880.html).
+   * > If you create a Prometheus alert rule for Hybrid Cloud Monitoring, this parameter specifies the name of the metric repository. For information about how to obtain the metric repository name, see [DescribeHybridMonitorNamespaceList](https://help.aliyun.com/document_detail/428880.html).
    * 
    * This parameter is required.
    * 
@@ -677,9 +678,9 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   metricName?: string;
   /**
    * @remarks
-   * The namespace of the cloud service. For more information about how to query the namespaces of cloud services, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * The namespace of the Alibaba Cloud service. For information about how to query the namespace of an Alibaba Cloud service, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
-   * >  If you create a Prometheus alert rule for Hybrid Cloud Monitoring, you must set this parameter to `acs_prometheus`.
+   * > If you create a Prometheus alert rule for Hybrid Cloud Monitoring, set this parameter to `acs_prometheus`.
    * 
    * This parameter is required.
    * 
@@ -689,11 +690,11 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   namespace?: string;
   /**
    * @remarks
-   * The method that is used to handle alerts when no monitoring data is found. Valid value:
+   * The processing method when no monitoring data is found. Valid values:
    * 
-   * *   KEEP_LAST_STATE (default): No operation is performed.
-   * *   INSUFFICIENT_DATA: An alert whose content is "Insufficient data" is triggered.
-   * *   OK: The status is considered normal.
+   * - KEEP_LAST_STATE (default): No action is taken.
+   * - INSUFFICIENT_DATA: An alert whose content is "Insufficient data" is triggered.
+   * - OK: The status is considered normal.
    * 
    * @example
    * KEEP_LAST_STATE
@@ -701,7 +702,7 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   noDataPolicy?: string;
   /**
    * @remarks
-   * The period of time during which the alert rule is ineffective.
+   * The time range during which the alert rule is ineffective.
    * 
    * @example
    * 00:00-06:00
@@ -709,9 +710,9 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   noEffectiveInterval?: string;
   /**
    * @remarks
-   * The statistical period of the metric. Unit: seconds. The default value is the interval at which the monitoring data of the metric is collected.
+   * The statistical period of the metric. Unit: seconds. The default value is the original reporting period of the metric.
    * 
-   * >  For more information about how to query the statistical periods of metrics, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * > For information about how to query the statistical period of a metric, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * 60
@@ -719,16 +720,16 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   period?: string;
   /**
    * @remarks
-   * Prometheus alerts.
+   * The Prometheus alert configuration.
    * 
-   * >  This parameter is required only if you create a Prometheus alert rule for Hybrid Cloud Monitoring.
+   * > Set this parameter only when you create a Prometheus alert rule for Hybrid Cloud Monitoring.
    */
   prometheus?: PutResourceMetricRuleRequestPrometheus;
   /**
    * @remarks
-   * The resource information. Examples: `[{"instanceId":"i-uf6j91r34rnwawoo****"}]` and `[{"userId":"100931896542****"}]`.
+   * The resource information, such as `[{"instanceId":"i-uf6j91r34rnwawoo****"}]` or `[{"userId":"100931896542****"}]`.
    * 
-   * For more information about the supported dimensions that are used to query resources, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+   * For information about the supported monitoring dimensions, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
    * 
    * @example
    * [{"instanceId":"i-uf6j91r34rnwawoo****"}]
@@ -738,9 +739,9 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
    * @remarks
    * The ID of the alert rule.
    * 
-   * You can specify a new ID or the ID of an existing alert rule. For more information about how to query the IDs of alert rules, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
+   * You can enter a new alert rule ID or use the ID of an existing alert rule in CloudMonitor. For information about how to query alert rule IDs, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
    * 
-   * >  If you specify a new ID, a threshold-triggered alert rule is created.
+   * > If you enter a new alert rule ID, a threshold alert rule is created.
    * 
    * This parameter is required.
    * 
@@ -752,9 +753,9 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
    * @remarks
    * The name of the alert rule.
    * 
-   * You can specify a new name or the name of an existing alert rule. For more information about how to query the names of alert rules, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
+   * You can enter a new alert rule name or use the name of an existing alert rule in CloudMonitor. For information about how to query alert rule names, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
    * 
-   * >  If you specify a new name, a threshold-triggered alert rule is created.
+   * > If you enter a new alert rule name, a threshold alert rule is created.
    * 
    * This parameter is required.
    * 
@@ -762,12 +763,19 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
    * test123
    */
   ruleName?: string;
+  /**
+   * @remarks
+   * Specifies whether to send a recovery notification.
+   * 
+   * @example
+   * true
+   */
   sendOK?: boolean;
   /**
    * @remarks
-   * The mute period during which new alert notifications are not sent even if the trigger conditions are met. Unit: seconds. Default value: 86400.
+   * The mute period. Unit: seconds. Default value: 86400.
    * 
-   * >  If an alert is not cleared after the mute period ends, CloudMonitor resends an alert notification.
+   * > The mute period specifies the interval at which an alert notification is re-sent if the alert does not recover to Normal.
    * 
    * @example
    * 86400
@@ -775,7 +783,7 @@ export class PutResourceMetricRuleRequest extends $dara.Model {
   silenceTime?: number;
   /**
    * @remarks
-   * The callback URL to which a POST request is sent when an alert is triggered based on the alert rule.
+   * The callback URL to which a POST request is sent when an alert is triggered.
    * 
    * @example
    * https://alert.aliyun.com.com:8080/callback