@alicloud/cms20190101 4.0.9 → 4.0.10

package/dist/models/PutResourceMetricRuleRequest.d.ts

@@ -2,22 +2,22 @@ import * as $dara from '@darabonba/typescript';
 export declare class PutResourceMetricRuleRequestEscalationsCritical extends $dara.Model {
     /**
      * @remarks
-     * The operator that is used to compare the metric value with the threshold for Critical-level alerts. Valid value:
+     * Critical级别阈值比较符。取值：
      *
-     * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-     * *   GreaterThanThreshold: greater than the threshold
-     * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-     * *   LessThanThreshold: less than the threshold
-     * *   NotEqualToThreshold: not equal to the threshold
-     * *   EqualToThreshold: equal to the threshold
-     * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-     * *   LessThanYesterday: less than the metric value at the same time yesterday
-     * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-     * *   LessThanLastWeek: less than the metric value at the same time last week
-     * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-     * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+     * - GreaterThanOrEqualToThreshold：大于等于。
+     * - GreaterThanThreshold：大于。
+     * - LessThanOrEqualToThreshold：小于等于。
+     * - LessThanThreshold：小于。
+     * - NotEqualToThreshold：不等于。
+     * - EqualToThreshold：等于。
+     * - GreaterThanYesterday：同比昨天时间上涨。
+     * - LessThanYesterday：同比昨天时间下降。
+     * - GreaterThanLastWeek：同比上周同一时间上涨。
+     * - LessThanLastWeek：同比上周同一时间下降。
+     * - GreaterThanLastPeriod：环比上周期上涨。
+     * - LessThanLastPeriod：环比上周期下降。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * GreaterThanOrEqualToThreshold
@@ -25,11 +25,11 @@ export declare class PutResourceMetricRuleRequestEscalationsCritical extends $da
     comparisonOperator?: string;
     /**
      * @remarks
-     * The statistical methods for Critical-level alerts.
+     * Critical级别报警统计方法。
      *
-     * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * Average
@@ -37,9 +37,10 @@ export declare class PutResourceMetricRuleRequestEscalationsCritical extends $da
     statistics?: string;
     /**
      * @remarks
-     * The threshold for Critical-level alerts.
+     * Critical级别报警阈值。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     *
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 90
@@ -47,9 +48,9 @@ export declare class PutResourceMetricRuleRequestEscalationsCritical extends $da
     threshold?: string;
     /**
      * @remarks
-     * The consecutive number of times for which the metric value meets the alert condition before a Critical-level alert is triggered.
+     * Critical级别报警重试次数。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 3
@@ -69,22 +70,22 @@ export declare class PutResourceMetricRuleRequestEscalationsCritical extends $da
 export declare class PutResourceMetricRuleRequestEscalationsInfo extends $dara.Model {
     /**
      * @remarks
-     * The operator that is used to compare the metric value with the threshold for Info-level alerts. Valid value:
+     * Info级别阈值比较符。取值：
      *
-     * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-     * *   GreaterThanThreshold: greater than the threshold
-     * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-     * *   LessThanThreshold: less than the threshold
-     * *   NotEqualToThreshold: not equal to the threshold
-     * *   EqualToThreshold: equal to the threshold
-     * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-     * *   LessThanYesterday: less than the metric value at the same time yesterday
-     * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-     * *   LessThanLastWeek: less than the metric value at the same time last week
-     * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-     * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+     * - GreaterThanOrEqualToThreshold：大于等于。
+     * - GreaterThanThreshold：大于。
+     * - LessThanOrEqualToThreshold：小于等于。
+     * - LessThanThreshold：小于。
+     * - NotEqualToThreshold：不等于。
+     * - EqualToThreshold：等于。
+     * - GreaterThanYesterday：同比昨天时间上涨。
+     * - LessThanYesterday：同比昨天时间下降。
+     * - GreaterThanLastWeek：同比上周同一时间上涨。
+     * - LessThanLastWeek：同比上周同一时间下降。
+     * - GreaterThanLastPeriod：环比上周期上涨。
+     * - LessThanLastPeriod：环比上周期下降。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * GreaterThanOrEqualToThreshold
@@ -92,11 +93,11 @@ export declare class PutResourceMetricRuleRequestEscalationsInfo extends $dara.M
     comparisonOperator?: string;
     /**
      * @remarks
-     * The statistical methods for Info-level alerts.
+     * Info级别报警统计方法。
      *
-     * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * Average
@@ -104,9 +105,9 @@ export declare class PutResourceMetricRuleRequestEscalationsInfo extends $dara.M
     statistics?: string;
     /**
      * @remarks
-     * The threshold for Info-level alerts.
+     * Info级别报警阈值。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 90
@@ -114,9 +115,9 @@ export declare class PutResourceMetricRuleRequestEscalationsInfo extends $dara.M
     threshold?: string;
     /**
      * @remarks
-     * The consecutive number of times for which the metric value meets the alert condition before an Info-level alert is triggered.
+     * Info级别报警重试次数。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 3
@@ -136,22 +137,22 @@ export declare class PutResourceMetricRuleRequestEscalationsInfo extends $dara.M
 export declare class PutResourceMetricRuleRequestEscalationsWarn extends $dara.Model {
     /**
      * @remarks
-     * The operator that is used to compare the metric value with the threshold for Warn-level alerts. Valid value:
+     * Warn级别阈值比较符。取值：
      *
-     * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-     * *   GreaterThanThreshold: greater than the threshold
-     * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-     * *   LessThanThreshold: less than the threshold
-     * *   NotEqualToThreshold: not equal to the threshold
-     * *   EqualToThreshold: equal to the threshold
-     * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-     * *   LessThanYesterday: less than the metric value at the same time yesterday
-     * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-     * *   LessThanLastWeek: less than the metric value at the same time last week
-     * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-     * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+     * - GreaterThanOrEqualToThreshold：大于等于。
+     * - GreaterThanThreshold：大于。
+     * - LessThanOrEqualToThreshold：小于等于。
+     * - LessThanThreshold：小于。
+     * - NotEqualToThreshold：不等于。
+     * - EqualToThreshold：等于。
+     * - GreaterThanYesterday：同比昨天时间上涨。
+     * - LessThanYesterday：同比昨天时间下降。
+     * - GreaterThanLastWeek：同比上周同一时间上涨。
+     * - LessThanLastWeek：同比上周同一时间下降。
+     * - GreaterThanLastPeriod：环比上周期上涨。
+     * - LessThanLastPeriod：环比上周期下降。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * GreaterThanOrEqualToThreshold
@@ -159,11 +160,11 @@ export declare class PutResourceMetricRuleRequestEscalationsWarn extends $dara.M
     comparisonOperator?: string;
     /**
      * @remarks
-     * The statistical methods for Warn-level alerts.
+     * Warn级别报警统计方法。
      *
-     * The value of this parameter is determined by the `Statistics` column corresponding to the `MetricName` parameter of the specified cloud service. The value of this parameter can be Maximum, Minimum, or Average. For more information about how to obtain the value of this parameter, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * 该参数的取值由指定云产品的`MetricName`对应的`Statistics`列决定，例如：Maximum、Minimum和Average。关于如何获取该参数的取值，请参见[云产品监控项](https://help.aliyun.com/document_detail/163515.html)。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * Average
@@ -171,9 +172,8 @@ export declare class PutResourceMetricRuleRequestEscalationsWarn extends $dara.M
     statistics?: string;
     /**
      * @remarks
-     * The threshold for Warn-level alerts.
-     *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * Warn级别报警阈值。
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 90
@@ -181,9 +181,9 @@ export declare class PutResourceMetricRuleRequestEscalationsWarn extends $dara.M
     threshold?: string;
     /**
      * @remarks
-     * The consecutive number of times for which the metric value meets the alert condition before a Warn-level alert is triggered.
+     * Warn级别报警重试次数。
      *
-     * >  You must select at least one of the Critical, Warn, and Info alert levels and specify the Statistics, ComparisonOperator, Threshold, and Times parameters for each alert level.
+     * > 报警级别Critical（严重）、Warn（警告）或Info（信息）至少设置一个，且该报警级别中的参数Statistics、ComparisonOperator、Threshold和Times必须同时设置。
      *
      * @example
      * 3
@@ -218,20 +218,20 @@ export declare class PutResourceMetricRuleRequestEscalations extends $dara.Model
 export declare class PutResourceMetricRuleRequestCompositeExpressionExpressionList extends $dara.Model {
     /**
      * @remarks
-     * The operator that is used to compare the metric value with the threshold. Valid value:
+     * The comparison operator for the threshold. Valid values:
      *
-     * *   GreaterThanOrEqualToThreshold: greater than or equal to the threshold
-     * *   GreaterThanThreshold: greater than the threshold
-     * *   LessThanOrEqualToThreshold: less than or equal to the threshold
-     * *   LessThanThreshold: less than the threshold
-     * *   NotEqualToThreshold: not equal to the threshold
-     * *   EqualToThreshold: equal to the threshold
-     * *   GreaterThanYesterday: greater than the metric value at the same time yesterday
-     * *   LessThanYesterday: less than the metric value at the same time yesterday
-     * *   GreaterThanLastWeek: greater than the metric value at the same time last week
-     * *   LessThanLastWeek: less than the metric value at the same time last week
-     * *   GreaterThanLastPeriod: greater than the metric value in the last monitoring cycle
-     * *   LessThanLastPeriod: less than the metric value in the last monitoring cycle
+     * - GreaterThanOrEqualToThreshold: greater than or equal to the threshold.
+     * - GreaterThanThreshold: greater than the threshold.
+     * - LessThanOrEqualToThreshold: less than or equal to the threshold.
+     * - LessThanThreshold: less than the threshold.
+     * - NotEqualToThreshold: not equal to the threshold.
+     * - EqualToThreshold: equal to the threshold.
+     * - GreaterThanYesterday: greater than the value at the same time yesterday.
+     * - LessThanYesterday: less than the value at the same time yesterday.
+     * - GreaterThanLastWeek: greater than the value at the same time last week.
+     * - LessThanLastWeek: less than the value at the same time last week.
+     * - GreaterThanLastPeriod: greater than the value in the last period.
+     * - LessThanLastPeriod: less than the value in the last period.
      *
      * @example
      * GreaterThanOrEqualToThreshold
@@ -239,7 +239,7 @@ export declare class PutResourceMetricRuleRequestCompositeExpressionExpressionLi
     comparisonOperator?: string;
     /**
      * @remarks
-     * The metric that is used to monitor the cloud service.
+     * The metric name of the Alibaba Cloud service.
      *
      * @example
      * cpu_total
@@ -257,14 +257,13 @@ export declare class PutResourceMetricRuleRequestCompositeExpressionExpressionLi
     period?: number;
     /**
      * @remarks
-     * The statistical method of the metric. Valid value:
+     * The statistical method of the metric. Valid values:
+     * - $Maximum: maximum value.
+     * - $Minimum: minimum value.
+     * - $Average: average value.
+     * - $Availability: active rate (typically used for site monitoring).
      *
-     * *   $Maximum: the maximum value
-     * *   $Minimum: the minimum value
-     * *   $Average: the average value
-     * *   $Availability: the availability rate (usually used for site monitoring)
-     *
-     * >  `$` is the prefix of the metric. For information about the Alibaba Cloud services that are supported by CloudMonitor, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * > `$` is the unified prefix for metrics. For information about supported Alibaba Cloud services, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
      * @example
      * $Maximum
@@ -292,15 +291,16 @@ export declare class PutResourceMetricRuleRequestCompositeExpressionExpressionLi
 export declare class PutResourceMetricRuleRequestCompositeExpression extends $dara.Model {
     /**
      * @remarks
-     * The trigger conditions that are created in standard mode.
+     * The list of alert conditions created in standard mode.
      */
     expressionList?: PutResourceMetricRuleRequestCompositeExpressionExpressionList[];
     /**
      * @remarks
-     * The relationship between the trigger conditions for multiple metrics. Valid value:
+     * The relationship between multi-metric alert conditions. Valid values:
+     *
+     * - `&&`: An alert is triggered only when all metrics meet the alert conditions. An alert is triggered only when all expressions in ExpressionList evaluate to `true`.
      *
-     * *   `&&`: An alert is triggered only if all metrics meet the trigger conditions. An alert is triggered only if the results of all expressions specified in the ExpressionList parameter are `true`.
-     * *   `||`: An alert is triggered if one of the metrics meets the trigger conditions.
+     * - `||`: An alert is triggered when any metric meets the alert conditions.
      *
      * @example
      * ||
@@ -308,11 +308,11 @@ export declare class PutResourceMetricRuleRequestCompositeExpression extends $da
     expressionListJoin?: string;
     /**
      * @remarks
-     * The trigger conditions that are created by using expressions. You can use expressions to create trigger conditions in the following scenarios:
+     * The alert condition created by using an expression. The following scenarios are supported:
      *
-     * *   Set an alert blacklist for specific resources. For example, if you specify `$instanceId != \\"i-io8kfvcpp7x5****\\" ``&&`` $Average > 50`, no alert is triggered when the `average metric value` of the `i-io8kfvcpp7x5****` instance exceeds 50.
-     * *   Set a special alert threshold for a specified instance in the rule. For example, if you specify `$Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)`, an alert is triggered when the `average metric value` of the `i-io8kfvcpp7x5****` instance exceeds 80 or the `average metric value` of other instances exceeds 50.
-     * *   Limit the number of instances whose metric values exceed the threshold. For example, if you specify `count($Average > 20) > 3`, an alert is triggered only when the `average metric value` of more than three instances exceeds 20.
+     * - Set an alert blacklist for specific resources. For example, `$instanceId != \\"i-io8kfvcpp7x5****\\" ``&&`` $Average > 50` specifies that no alert is triggered for instance `i-io8kfvcpp7x5****` even if its `Average` exceeds 50.
+     * - Set a special alert threshold for a specific instance in the rule. For example, `$Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)` specifies that an alert is triggered for instance `i-io8kfvcpp7x5****` only when its `Average` exceeds 80, while an alert is triggered for other instances when their `Average` exceeds 50.
+     * - Limit the number of instances that exceed the threshold. For example, `count($Average > 20) > 3` specifies that an alert is triggered only when more than three instances have an `Average` greater than 20.
      *
      * @example
      * $Average > ($instanceId == \\"i-io8kfvcpp7x5****\\"? 80: 50)
@@ -321,18 +321,17 @@ export declare class PutResourceMetricRuleRequestCompositeExpression extends $da
     /**
      * @remarks
      * The alert level. Valid values:
-     *
-     * *   Critical
-     * *   Warn
-     * *   Info
+     * - CRITICAL: critical.
+     * - WARN: warning.
+     * - INFO: information.
      *
      * @example
-     * Critical
+     * CRITICAL
      */
     level?: string;
     /**
      * @remarks
-     * The number of consecutive triggers. If the number of times that the metric values meet the trigger conditions reaches the value of this parameter, CloudMonitor sends alert notifications.
+     * The number of times that the alert condition must be met before an alert notification is sent.
      *
      * @example
      * 3
@@ -352,7 +351,7 @@ export declare class PutResourceMetricRuleRequestCompositeExpression extends $da
 export declare class PutResourceMetricRuleRequestLabels extends $dara.Model {
     /**
      * @remarks
-     * The tag key.
+     * The label key.
      *
      * @example
      * tagKey1
@@ -360,9 +359,9 @@ export declare class PutResourceMetricRuleRequestLabels extends $dara.Model {
     key?: string;
     /**
      * @remarks
-     * The tag value.
+     * The label value.
      *
-     * >  You can use a template parameter to specify a tag value. CloudMonitor replaces the value of the template parameter with an actual tag value.
+     * > The label value supports template parameters. Template parameters are replaced with actual label values.
      *
      * @example
      * ECS
@@ -382,7 +381,7 @@ export declare class PutResourceMetricRuleRequestLabels extends $dara.Model {
 export declare class PutResourceMetricRuleRequestPrometheusAnnotations extends $dara.Model {
     /**
      * @remarks
-     * The key of the annotation.
+     * The annotation key.
      *
      * @example
      * summary
@@ -390,7 +389,7 @@ export declare class PutResourceMetricRuleRequestPrometheusAnnotations extends $
     key?: string;
     /**
      * @remarks
-     * The value of the annotation.
+     * The annotation value.
      *
      * @example
      * {{ $labels.instance }} CPU usage above 10% {current value: {{ humanizePercentage $value }} }
@@ -410,28 +409,27 @@ export declare class PutResourceMetricRuleRequestPrometheusAnnotations extends $
 export declare class PutResourceMetricRuleRequestPrometheus extends $dara.Model {
     /**
      * @remarks
-     * The annotations of the Prometheus alert rule. When a Prometheus alert is triggered, the system renders the annotated keys and values to help you understand the metrics and alert rule.
+     * The annotations for Prometheus alerting. The annotation keys and values are rendered to help you understand the metric or alert rule.
      *
-     * >  This parameter is equivalent to the annotations parameter of open source Prometheus.
+     * > This feature is equivalent to the Annotation feature in Prometheus.
      */
     annotations?: PutResourceMetricRuleRequestPrometheusAnnotations[];
     /**
      * @remarks
      * The alert level. Valid values:
-     *
-     * *   Critical
-     * *   Warn
-     * *   Info
+     * - CRITICAL: critical.
+     * - WARN: warning.
+     * - INFO: information.
      *
      * @example
-     * Critical
+     * CRITICAL
      */
     level?: string;
     /**
      * @remarks
-     * PromQL statements are supported.
+     * The PromQL query statement.
      *
-     * >  The data obtained by using the PromQL query statement is the monitoring data. You must include the alert threshold in this statement.
+     * > The data obtained by the PromQL query statement is the alert data. Include the alert threshold in this statement.
      *
      * @example
      * cpuUsage{instanceId="xxxx"}[1m]>90
@@ -439,7 +437,7 @@ export declare class PutResourceMetricRuleRequestPrometheus extends $dara.Model
     promQL?: string;
     /**
      * @remarks
-     * The number of consecutive triggers. If the number of times that the metric values meet the trigger conditions reaches the value of this parameter, CloudMonitor sends alert notifications.
+     * The number of times that the alert condition must be met before an alert notification is sent.
      *
      * @example
      * 3
@@ -460,16 +458,16 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     escalations?: PutResourceMetricRuleRequestEscalations;
     /**
      * @remarks
-     * The trigger conditions for multiple metrics.
+     * The alert conditions for multiple metrics.
      *
-     * >  The trigger conditions for a single metric and multiple metrics are mutually exclusive. You cannot specify trigger conditions for a single metric and multiple metrics at the same time.
+     * > Single-metric and multi-metric alert conditions are mutually exclusive and cannot be set at the same time.
      */
     compositeExpression?: PutResourceMetricRuleRequestCompositeExpression;
     /**
      * @remarks
-     * The alert contact groups. Alert notifications are sent to the alert contacts in the alert contact group.
+     * The alert contact group. Alert notifications are sent to the alert contacts in this alert contact group.
      *
-     * >  An alert contact group can contain one or more alert contacts. For information about how to create alert contacts and alert contact groups, see [PutContact](https://help.aliyun.com/document_detail/114923.html) and [PutContactGroup](https://help.aliyun.com/document_detail/114929.html).
+     * > An alert contact group contains one or more alert contacts. For information about how to create alert contacts and alert contact groups, see [PutContact](https://help.aliyun.com/document_detail/114923.html) and [PutContactGroup](https://help.aliyun.com/document_detail/114929.html).
      *
      * This parameter is required.
      *
@@ -479,7 +477,7 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     contactGroups?: string;
     /**
      * @remarks
-     * The period of time during which the alert rule is effective.
+     * The effective period of the alert rule.
      *
      * @example
      * 00:00-23:59
@@ -487,14 +485,17 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     effectiveInterval?: string;
     /**
      * @remarks
-     * The subject of the alert notification email.
+     * The subject of the alert email.
+     *
+     * @example
+     * ECS instance alert
      */
     emailSubject?: string;
     /**
      * @remarks
-     * The interval at which alerts are triggered based on the alert rule. Unit: seconds.
+     * The trigger period of the alert rule. Unit: seconds.
      *
-     * >  For more information about how to query the statistical periods of metrics, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * > For information about how to query the statistical period of a metric, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
      * @example
      * 60
@@ -502,16 +503,16 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     interval?: string;
     /**
      * @remarks
-     * If the metric meets the specified condition in the alert rule and CloudMonitor sends an alert notification, the tag is also written to the metric and displayed in the alert notification.
+     * The labels that are written to the metric and displayed in alert notifications when the metric meets the alert condition.
      *
-     * >  This parameter is equivalent to the Label parameter of Prometheus alerts.
+     * > This feature is the same as the Label feature in Prometheus alerting.
      */
     labels?: PutResourceMetricRuleRequestLabels[];
     /**
      * @remarks
-     * The metric name. For more information about how to query metric names, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * The name of the metric. For information about how to query metric names, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
-     * >  If you create a Prometheus alert rule for Hybrid Cloud Monitoring, you must set this parameter to the name of the namespace. For more information about how to query the names of namespaces, see [DescribeHybridMonitorNamespaceList](https://help.aliyun.com/document_detail/428880.html).
+     * > If you create a Prometheus alert rule for Hybrid Cloud Monitoring, this parameter specifies the name of the metric repository. For information about how to obtain the metric repository name, see [DescribeHybridMonitorNamespaceList](https://help.aliyun.com/document_detail/428880.html).
      *
      * This parameter is required.
      *
@@ -521,9 +522,9 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     metricName?: string;
     /**
      * @remarks
-     * The namespace of the cloud service. For more information about how to query the namespaces of cloud services, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * The namespace of the Alibaba Cloud service. For information about how to query the namespace of an Alibaba Cloud service, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
-     * >  If you create a Prometheus alert rule for Hybrid Cloud Monitoring, you must set this parameter to `acs_prometheus`.
+     * > If you create a Prometheus alert rule for Hybrid Cloud Monitoring, set this parameter to `acs_prometheus`.
      *
      * This parameter is required.
      *
@@ -533,11 +534,11 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     namespace?: string;
     /**
      * @remarks
-     * The method that is used to handle alerts when no monitoring data is found. Valid value:
+     * The processing method when no monitoring data is found. Valid values:
      *
-     * *   KEEP_LAST_STATE (default): No operation is performed.
-     * *   INSUFFICIENT_DATA: An alert whose content is "Insufficient data" is triggered.
-     * *   OK: The status is considered normal.
+     * - KEEP_LAST_STATE (default): No action is taken.
+     * - INSUFFICIENT_DATA: An alert whose content is "Insufficient data" is triggered.
+     * - OK: The status is considered normal.
      *
      * @example
      * KEEP_LAST_STATE
@@ -545,7 +546,7 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     noDataPolicy?: string;
     /**
      * @remarks
-     * The period of time during which the alert rule is ineffective.
+     * The time range during which the alert rule is ineffective.
      *
      * @example
      * 00:00-06:00
@@ -553,9 +554,9 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     noEffectiveInterval?: string;
     /**
      * @remarks
-     * The statistical period of the metric. Unit: seconds. The default value is the interval at which the monitoring data of the metric is collected.
+     * The statistical period of the metric. Unit: seconds. The default value is the original reporting period of the metric.
      *
-     * >  For more information about how to query the statistical periods of metrics, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * > For information about how to query the statistical period of a metric, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
      * @example
      * 60
@@ -563,16 +564,16 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     period?: string;
     /**
      * @remarks
-     * Prometheus alerts.
+     * The Prometheus alert configuration.
      *
-     * >  This parameter is required only if you create a Prometheus alert rule for Hybrid Cloud Monitoring.
+     * > Set this parameter only when you create a Prometheus alert rule for Hybrid Cloud Monitoring.
      */
     prometheus?: PutResourceMetricRuleRequestPrometheus;
     /**
      * @remarks
-     * The resource information. Examples: `[{"instanceId":"i-uf6j91r34rnwawoo****"}]` and `[{"userId":"100931896542****"}]`.
+     * The resource information, such as `[{"instanceId":"i-uf6j91r34rnwawoo****"}]` or `[{"userId":"100931896542****"}]`.
      *
-     * For more information about the supported dimensions that are used to query resources, see [Appendix 1: Metrics](https://help.aliyun.com/document_detail/163515.html).
+     * For information about the supported monitoring dimensions, see [Alibaba Cloud service monitoring metrics](https://help.aliyun.com/document_detail/163515.html).
      *
      * @example
      * [{"instanceId":"i-uf6j91r34rnwawoo****"}]
@@ -582,9 +583,9 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
      * @remarks
      * The ID of the alert rule.
      *
-     * You can specify a new ID or the ID of an existing alert rule. For more information about how to query the IDs of alert rules, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
+     * You can enter a new alert rule ID or use the ID of an existing alert rule in CloudMonitor. For information about how to query alert rule IDs, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
      *
-     * >  If you specify a new ID, a threshold-triggered alert rule is created.
+     * > If you enter a new alert rule ID, a threshold alert rule is created.
      *
      * This parameter is required.
      *
@@ -596,9 +597,9 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
      * @remarks
      * The name of the alert rule.
      *
-     * You can specify a new name or the name of an existing alert rule. For more information about how to query the names of alert rules, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
+     * You can enter a new alert rule name or use the name of an existing alert rule in CloudMonitor. For information about how to query alert rule names, see [DescribeMetricRuleList](https://help.aliyun.com/document_detail/114941.html).
      *
-     * >  If you specify a new name, a threshold-triggered alert rule is created.
+     * > If you enter a new alert rule name, a threshold alert rule is created.
      *
      * This parameter is required.
      *
@@ -606,12 +607,19 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
      * test123
      */
     ruleName?: string;
+    /**
+     * @remarks
+     * Specifies whether to send a recovery notification.
+     *
+     * @example
+     * true
+     */
     sendOK?: boolean;
     /**
      * @remarks
-     * The mute period during which new alert notifications are not sent even if the trigger conditions are met. Unit: seconds. Default value: 86400.
+     * The mute period. Unit: seconds. Default value: 86400.
      *
-     * >  If an alert is not cleared after the mute period ends, CloudMonitor resends an alert notification.
+     * > The mute period specifies the interval at which an alert notification is re-sent if the alert does not recover to Normal.
      *
      * @example
      * 86400
@@ -619,7 +627,7 @@ export declare class PutResourceMetricRuleRequest extends $dara.Model {
     silenceTime?: number;
     /**
      * @remarks
-     * The callback URL to which a POST request is sent when an alert is triggered based on the alert rule.
+     * The callback URL to which a POST request is sent when an alert is triggered.
      *
      * @example
      * https://alert.aliyun.com.com:8080/callback