@aipper/aiws-spec 0.0.24 → 0.0.25

package/templates/workspace/AGENTS.md

@@ -5,36 +5,78 @@
 3) `AI_WORKSPACE.md`（运行/测试入口真值）
 4) `changes/README.md`（变更工件流程与归档）
 
-协作约束（建议最小集）：
-- 每次变更使用分支 `change/<change-id>`，并维护 `changes/<change-id>/proposal.md`、`tasks.md`（可选 `design.md`）
-- 启用本机门禁（推荐）：`aiws hooks install .`（或手工：`git config core.hooksPath .githooks`；`git commit`/`git push` 会自动跑 `aiws validate .`）
-- 启用 hooks 后，`.githooks/commit-msg` 默认提示优先使用中文 commit message；如需强制，可执行：`git config aiws.commitMessagePolicy strict`
-- 提交前校验（强制门禁）：`aiws validate .`（包含：漂移检测 + `ws_change_check` + `requirements_contract`）
-- Codex（推荐）：本仓库内置 repo skills：`.agents/skills/`（可显式 `$ws-dev`，也可隐式套用工作流）
-- Codex skills 命名约定：`ws-*` 为常用链路入口；`p-*` 为私有原子入口（一般不需要直接调用）。
-- Codex skills（常用，一句话说明）：
-  - `$ws-preflight`：预检（读取真值文件并输出约束摘要）
-  - `$ws-submodule-setup`：子模块分支对齐（写入 `.gitmodules` 的 `submodule.<name>.branch`）
-  - `$ws-plan`：规划（生成可落盘 `plan/` 工件；供 `$ws-dev` 执行）
-  - `$ws-plan-verify`：计划质检（执行前检查计划是否过长/跑偏）
-  - `$p-tasks-plan`：原子：tasks 同步（从 `changes/<id>/tasks.md` 生成 `update_plan` payload）
-  - `$ws-dev`：开发（按需求实现并验证；适用于任何需要修改代码/配置的任务）
-  - `$ws-bugfix`：缺陷修复（禅道 MCP 拉单 + 图片证据落盘 + `issues/fix_bus_issues.csv` 汇总）
-  - `$ws-pull`：拉取并对齐 submodules（尽量避免 detached；减少人为差异）
-  - `$ws-push`：推送（submodule 感知：先 submodules 后 superproject；fast-forward 安全）
-  - `$ws-review`：评审（提交前审计；证据优先落盘到 `changes/<change-id>/review/`）
-  - `$ws-commit`：提交（先审计/门禁再 commit；submodule 感知）
-  - `$ws-handoff`：交接（归档后生成/查看 `changes/archive/.../handoff.md`，便于跨会话接力）
-  - `$p-aiws-init`：初始化工作区（生成真值文件与门禁）
-  - `$p-aiws-validate`：校验工作区（漂移检测 + 门禁）
-  - `$p-aiws-hooks-install`：启用 git hooks 门禁（`core.hooksPath=.githooks`）
-  - `$p-aiws-change-new`：创建 `changes/<change-id>` 工件
-- Codex CLI（推荐，可选）：安装全局 skills：`npx @aipper/aiws codex install-skills`（写入 `~/.codex/skills/` 或 `$CODEX_HOME/skills`）
-- Codex CLI（遗留，可选）：安装全局 prompts：`npx @aipper/aiws codex install-prompts`（写入 `~/.codex/prompts/` 或 `$CODEX_HOME/prompts`；prompts 已 deprecated）
-- 不要把敏感信息写入 git：`secrets/test-accounts.json`、`.env*`、token、内网地址等
-
-如果缺文件：运行 `npx @aipper/aiws init`（或 `aiws init`）。
-（如你仍在使用 dotfiles 的 `ws` wrappers，也可用 `ws init/ws migrate`；但本模板默认不依赖 dotfiles。）
+最小协作约束：
+- 不确定先跑 `/using-aiws`（Codex 对应 `$using-aiws`）；它会先读真值，再把任务路由到合适的 `ws-*` 入口。
+- 若你已经明确只是做预检，也可以直接跑 `/ws-preflight`（Codex 对应 `$ws-preflight`）；所有实现/修复都以 `AI_PROJECT.md` / `REQUIREMENTS.md` / `AI_WORKSPACE.md` 为准。
+- 每次变更建议进入 `change/<change-id>`，并维护 `changes/<change-id>/proposal.md`、`tasks.md`（可选 `design.md`）。
+- 若仓库存在 `.gitmodules`：优先 `aiws change start <change-id> --worktree`；不要在当前 superproject worktree 里直接切分支。
+- 提交前执行 `aiws validate .`；需要本机门禁时运行 `aiws hooks install .`（或 `git config core.hooksPath .githooks`）。
+- 不要把敏感信息写入 git：`secrets/test-accounts.json`、`.env*`、token、内网地址等。
+
+标准链路（建议默认）：
+- `using-aiws`：默认 bootstrap/router；先读真值，先判 workflow，再进入具体阶段；意图不明确时先澄清。
+- `ws-preflight`：读取真值文件，输出约束摘要；若真值缺失，先停止，不直接开工。
+- `ws-plan`：建立 `change/<change-id>` 绑定，落盘 `plan/...`，明确 Verify / Risks / Evidence。
+- `ws-plan-verify`：在编码前做计划质检；不过门禁就先修 plan，不跳步进实现。
+- `ws-dev`：只做可归因、可验证的小步实现；输出 Changed / Verify / Evidence。
+- `ws-delegate`：仅在任务已绑定且 scope 可控时，使用原生多 agent / sub-agent；否则明确降级为单 agent + 协同工件模式。
+- `ws-review`：对当前改动做通用审计；高风险或准备交付时，继续细化到 `ws-spec-review` + `ws-quality-review`。
+- `ws-spec-review`：审查 requirements 归因、plan/change 绑定、evidence 与 workflow gate 完整性。
+- `ws-quality-review`：审查行为回归、边界条件、测试覆盖与实现质量。
+- `ws-commit`：串联 review + validate stamp + commit message 确认；不跳过 hooks。
+- `ws-verify-before-complete`：在 finish / handoff 前检查双审查、validate stamp 与交付证据是否齐全。
+- `ws-deliver` / `ws-finish`：做交付收尾、fast-forward 合并、submodule 感知 push 与证据收敛。
+- `ws-handoff`：在归档后输出 handoff，给下一次会话或下一位协作者接力。
+
+阶段产物（最少）：
+- planning：`plan/...`、`changes/<change-id>/proposal.md`、`tasks.md`
+- implementation：代码 / 配置改动 + Verify 命令记录
+- collaboration：`changes/<change-id>/analysis/...`、`patches/...`、`review/...`
+- review：`changes/<change-id>/review/...` 或回退 `.agentdocs/tmp/review/...`
+- validate：`.agentdocs/tmp/aiws-validate/*.json`
+- handoff / archive：`changes/<change-id>/evidence/...`、`changes/archive/.../handoff.md`
+
+OpenCode（如果你主要用 OpenCode，优先）：
+- native skills 在 `.opencode/skills/`；native commands 在 `.opencode/commands/`
+- 若项目启用了 `.opencode/oh-my-opencode.json`：`ws-plan` / `ws-review` / `ws-spec-review` / `ws-quality-review` / `ws-delegate` 会优先借用 oMo 的 `planner-sisyphus` / `explore` / `librarian` / `oracle`
+- 若你想按项目固定这组 agent，可参考 `.opencode/oh-my-opencode.json.example`；它只覆盖 `agents`，不接管 hooks/MCP/LSP
+- 常用手动入口继续保留在 `.opencode/commands/`（migration window 内 `.opencode/command/` 也会保留）；直接使用 `/ws-*`
+- 若你不确定当前任务该先 plan、dev、review 还是 finish：先用 `/using-aiws`
+- `/ws-preflight`：读取真值文件并输出约束摘要
+- `/ws-plan` / `/ws-plan-verify`：先生成计划，再做执行前质检
+- `/ws-dev`：常规实现/改配置/改测试
+- `/ws-delegate`：按 AIWS 委托合同拆分子任务，并优先借用 oMo agent
+- `/ws-bugfix`：缺陷修复 + 证据落盘 + CSV 汇总
+- `/ws-review` / `/ws-commit`：提交前审计、门禁与 commit
+- `/ws-spec-review` / `/ws-quality-review`：高风险改动建议显式拆成流程审查 + 质量审查
+- `/ws-verify-before-complete`：finish / handoff 前检查双审查和 validate/evidence
+- `/ws-finish` / `/ws-deliver`：交付收尾（fast-forward / submodule 感知）
+- `/ws-pull` / `/ws-push` / `/ws-submodule-setup`：submodule 场景辅助
+- `/p-aiws-*` 为底层原子入口；模板会同时写入 `.opencode/commands/` 与 `.opencode/command/`，一般不需要直接调用
+
+Claude Code（如果你主要用 Claude Code）：
+- native skills 在 `.claude/skills/`；command-style 兼容入口保留在 `.claude/commands/`
+- 常用链路可按 `ws-*` / `p-aiws-*` 理解；native skills 与 compatibility commands 指向同一套 AIWS workflow
+- 若你不确定当前任务该走哪个阶段：先用 `/using-aiws`
+- 高风险改动或准备 finish 时，建议额外跑 `/ws-spec-review`、`/ws-quality-review`、`/ws-verify-before-complete`
+
+Codex（对应入口，可选）：
+- 若你不想先记住阶段，先用 `$using-aiws` 让 router 判定下一步
+- 对应入口在 `.agents/skills/`；显式调用时使用 `$ws-*`
+- `$using-aiws`
+- `$ws-preflight` / `$ws-plan` / `$ws-plan-verify` / `$ws-dev` / `$ws-delegate` / `$ws-frontend-design`
+- `$ws-review` / `$ws-spec-review` / `$ws-quality-review` / `$ws-commit`
+- `$ws-verify-before-complete` / `$ws-finish` / `$ws-deliver`
+- `$ws-pull` / `$ws-push` / `$ws-submodule-setup`
+- 其它入口见 `.agents/skills/`：`ws-*` 为常用链路；`p-*` 为底层原子入口，一般不需要直接调用
+
+Codex 全局入口（可选）：
+- `npx @aipper/aiws codex install-skills`（推荐；安装全局 skills）
+- `npx @aipper/aiws codex install-prompts`（遗留兼容；prompts 已 deprecated）
+
+缺文件或模板漂移时：
+- `npx @aipper/aiws init`（初始化）
+- `npx @aipper/aiws update`（按模板更新托管内容）
 <!-- AIWS_MANAGED_END:agents -->
 
 你可以在本段下方追加项目自定义说明；`aiws update` 不会改动托管块以外内容。

package/templates/workspace/changes/README.md

@@ -15,11 +15,22 @@ changes/
     proposal.md
     design.md        # 可选
     tasks.md
+    analysis/        # 可选：外部/子 agent 的分析结论（只读输入）
+    patches/         # 可选：外部/子 agent 的 patch 草案（不自动应用）
+    review/          # 可选：多个 reviewer 的审查结果
+    evidence/        # 推荐：交付前收敛出的持久证据
     .ws-change.json
   archive/
     YYYY-MM-DD-<change-id>/
 ```
 
+协同工件约定：
+- `analysis/`：存放委托分析报告、调研结论、备选方案。默认视为“只读输入”，不要把它当作已实施结果。
+- `patches/`：存放 patch / diff 草案。主 agent 或人工必须先审查，再决定是否应用；不要把该目录内容视为已经进代码库。
+- `review/`：允许多名 reviewer 并行落盘，例如 `codex-review.md`、`reviewer-a.md`、`reviewer-b.md`。
+- `evidence/`：存放 validate 总结、delivery summary、collaboration summary 等可持久引用的交付证据。
+- `aiws change new <change-id>` 会预创建以上目录，减少临时约定漂移。
+
 常用命令（推荐使用 `aiws`；不依赖 dotfiles）：
 - `aiws change start <change-id>`（默认：切到 `change/<change-id>` 并初始化工件目录；若检测到 `.gitmodules` 则默认优先使用 worktree，失败则回退为不切分支，避免 submodule 状态混乱）
 - `aiws change start <change-id> --no-switch`（superproject + submodule 场景：不切分支，仅准备 `change/<change-id>` 分支与工件目录）
@@ -36,6 +47,7 @@ changes/
 - `aiws change validate <change-id>`
 - `aiws change sync <change-id>`
 - `aiws change archive <change-id>`
+- `aiws change evidence <change-id>`（收敛 review / validate / collaboration summary 到 `changes/<id>/evidence/`）
 
 Active change（推荐，团队共享）：
 - 使用分支名声明当前变更：`change/<change-id>`（也支持 `changes/`、`ws/`、`ws-change/`）
@@ -76,3 +88,9 @@ Hooks/CI（推荐，硬约束）：
   - 完成后在主工作区（例如 `main`）执行：`aiws change finish <change-id>`（等价于 `git merge --ff-only change/<change-id>`）
   - 若还要顺手 push 并清理独立 change worktree：`aiws change finish <change-id> --push`
   - 若失败：先在 worktree 里 `git rebase main`（或更新 main 后再 rebase），再重试 `--ff-only`
+
+协同交付建议：
+- 委托分析先落到 `changes/<id>/analysis/`，由主 agent 在 `ws-review` 或 `review/*.md` 中收敛结论。
+- patch 草案先落到 `changes/<id>/patches/`，未经审查不要直接应用。
+- 交付前建议执行：`aiws change evidence <change-id>`，让 `delivery-summary` 与 `collaboration-summary` 一起落到 `changes/<id>/evidence/`。
+- 归档后 `handoff.md` 会包含协同工件摘要，便于下一次会话继续接力。

package/templates/workspace/changes/templates/proposal.md

@@ -45,6 +45,20 @@
 
 - <!-- WS:TODO 逐条写清要改什么（行为/接口/数据/配置）；BREAKING 请标注 -->
 
+## 协同与委托（可选）
+
+- `analysis/`：
+  - <!-- WS:TODO 如需委托分析，写明预计产物；例如 `changes/<change-id>/analysis/research-a.md` -->
+- `patches/`：
+  - <!-- WS:TODO 如需外部 patch 草案，写明预计文件；例如 `changes/<change-id>/patches/fix-a.patch` -->
+- `review/`：
+  - <!-- WS:TODO 如需多审查者，写明 reviewer 文件命名或汇总策略 -->
+
+> 规则：
+> - `analysis/` 产物默认只作为输入依据，不等于实现完成。
+> - `patches/` 中的 patch 草案不自动应用，必须经主 agent 或人工审查。
+> - 交付前建议把协同结果收敛到 `review/` 或 `evidence/`，并回填 `Evidence_Path`。
+
 ## 影响范围（Scope）
 
 ### In Scope（本次改动范围）
@@ -95,3 +109,4 @@
 - 证据落盘（推荐双层）：
   - 持久（建议入库）：`changes/<change-id>/evidence/...`（例如 validate 总结、review 总结、关键日志摘要）
   - 临时（可忽略入库）：`.agentdocs/tmp/...`（例如 `aiws validate . --stamp` 的 JSON）
+  - 协同（按需）：`changes/<change-id>/analysis/...`、`patches/...`、`review/...`

package/templates/workspace/changes/templates/tasks.md

@@ -25,6 +25,12 @@
 - [ ] 2.1 <!-- WS:TODO -->
 - [ ] 2.2 <!-- WS:TODO -->
 
+## 2A. 协同（可选）
+
+- [ ] 2A.1 若使用委托分析：把结果落盘到 `changes/{{CHANGE_ID}}/analysis/`
+- [ ] 2A.2 若使用 patch 草案：把结果落盘到 `changes/{{CHANGE_ID}}/patches/`，并记录是否采用
+- [ ] 2A.3 若存在多审查者：把审查结果落盘到 `changes/{{CHANGE_ID}}/review/`
+
 ## 3. 验证（必须可复现）
 
 - [ ] 3.1 <!-- WS:TODO 写具体命令（来自 AI_WORKSPACE.md） -->
@@ -33,5 +39,6 @@
 ## 4. 交付与归档
 
 - [ ] 4.1 证据落盘到 `.agentdocs/tmp/...`（报告/日志/请求响应等）
-- [ ] 4.2 交叉审计（可选但推荐）：在 AI 工具内运行 `/ws-review`（或按 `AI_PROJECT.md` 手工审计）
-- [ ] 4.3 归档：`aiws change archive {{CHANGE_ID}}`
+- [ ] 4.2 生成持久证据：`aiws change evidence {{CHANGE_ID}}`
+- [ ] 4.3 交叉审计（可选但推荐）：在 AI 工具内运行 `/ws-review`（或按 `AI_PROJECT.md` 手工审计）
+- [ ] 4.4 归档：`aiws change archive {{CHANGE_ID}}`

package/templates/workspace/manifest.json

@@ -64,6 +64,7 @@
     ".opencode/command/ws-finish.md",
     ".opencode/command/ws-submodule-setup.md",
     ".opencode/command/ws-review.md",
+    ".opencode/command/ws-delegate.md",
     ".opencode/command/ws-commit.md",
     ".opencode/command/ws-rule.md",
     ".opencode/command/ws-req-review.md",
@@ -121,10 +122,14 @@
     ".claude/commands/p-aiws-change-validate.md",
     ".claude/commands/p-aiws-hooks-install.md",
     ".claude/commands/p-aiws-hooks-status.md",
+    ".claude/commands/using-aiws.md",
     ".claude/commands/ws-plan.md",
     ".claude/commands/ws-plan-verify.md",
     ".claude/commands/ws-handoff.md",
     ".claude/commands/ws-bugfix.md",
+    ".claude/commands/ws-spec-review.md",
+    ".claude/commands/ws-quality-review.md",
+    ".claude/commands/ws-verify-before-complete.md",
     ".opencode/command/p-aiws-change-archive.md",
     ".opencode/command/p-aiws-change-finish.md",
     ".opencode/command/p-aiws-change-list.md",
@@ -138,14 +143,23 @@
     ".opencode/command/p-aiws-change-validate.md",
     ".opencode/command/p-aiws-hooks-install.md",
     ".opencode/command/p-aiws-hooks-status.md",
+    ".opencode/command/using-aiws.md",
     ".opencode/command/ws-plan.md",
+    ".opencode/command/ws-delegate.md",
     ".opencode/command/ws-plan-verify.md",
-    ".opencode/command/ws-handoff.md"
+    ".opencode/command/ws-handoff.md",
+    ".opencode/command/ws-spec-review.md",
+    ".opencode/command/ws-quality-review.md",
+    ".opencode/command/ws-verify-before-complete.md",
+    ".claude/skills/**",
+    ".opencode/skills/**",
+    ".opencode/commands/**"
   ],
   "optional": [
     ".iflow/agents/**",
     "memory-bank/**",
     "secrets/test-accounts.example.json",
+    ".opencode/oh-my-opencode.json.example",
     "changes/templates/proposal.md",
     "changes/templates/tasks.md",
     "changes/templates/design.md",
@@ -226,6 +240,7 @@
       ".agents/skills/p-aiws-validate/SKILL.md",
       ".agents/skills/p-aiws-hooks-install/SKILL.md",
       ".agents/skills/p-aiws-hooks-status/SKILL.md",
+      ".agents/skills/using-aiws/SKILL.md",
       ".agents/skills/p-aiws-change-list/SKILL.md",
       ".agents/skills/p-aiws-change-new/SKILL.md",
       ".agents/skills/p-aiws-change-start/SKILL.md",
@@ -241,6 +256,8 @@
       ".agents/skills/ws-bugfix/SKILL.md",
       ".agents/skills/ws-commit/SKILL.md",
       ".agents/skills/ws-dev/SKILL.md",
+      ".agents/skills/ws-delegate/SKILL.md",
+      ".agents/skills/ws-frontend-design/SKILL.md",
       ".agents/skills/ws-deliver/SKILL.md",
       ".agents/skills/ws-finish/SKILL.md",
       ".agents/skills/ws-migrate/SKILL.md",
@@ -258,6 +275,9 @@
       ".agents/skills/ws-req-flow-sync/SKILL.md",
       ".agents/skills/ws-req-review/SKILL.md",
       ".agents/skills/ws-review/SKILL.md",
+      ".agents/skills/ws-spec-review/SKILL.md",
+      ".agents/skills/ws-quality-review/SKILL.md",
+      ".agents/skills/ws-verify-before-complete/SKILL.md",
       ".agents/skills/ws-rule/SKILL.md",
       ".opencode/command/ws-bugfix.md",
       ".iflow/commands/aiws-init.toml",
@@ -310,9 +330,13 @@
       ".claude/commands/p-aiws-change-validate.md",
       ".claude/commands/p-aiws-hooks-install.md",
       ".claude/commands/p-aiws-hooks-status.md",
+      ".claude/commands/using-aiws.md",
       ".claude/commands/ws-plan.md",
       ".claude/commands/ws-plan-verify.md",
       ".claude/commands/ws-bugfix.md",
+      ".claude/commands/ws-spec-review.md",
+      ".claude/commands/ws-quality-review.md",
+      ".claude/commands/ws-verify-before-complete.md",
       ".opencode/command/p-aiws-change-archive.md",
       ".opencode/command/p-aiws-change-finish.md",
       ".opencode/command/p-aiws-change-list.md",
@@ -326,8 +350,103 @@
       ".opencode/command/p-aiws-change-validate.md",
       ".opencode/command/p-aiws-hooks-install.md",
       ".opencode/command/p-aiws-hooks-status.md",
+      ".opencode/command/using-aiws.md",
       ".opencode/command/ws-plan.md",
-      ".opencode/command/ws-plan-verify.md"
+      ".opencode/command/ws-delegate.md",
+      ".opencode/command/ws-plan-verify.md",
+      ".opencode/command/ws-spec-review.md",
+      ".opencode/command/ws-quality-review.md",
+      ".opencode/command/ws-verify-before-complete.md",
+      ".claude/skills/p-aiws-change-archive/SKILL.md",
+      ".opencode/skills/p-aiws-change-archive/SKILL.md",
+      ".claude/skills/p-aiws-change-finish/SKILL.md",
+      ".opencode/skills/p-aiws-change-finish/SKILL.md",
+      ".claude/skills/p-aiws-change-list/SKILL.md",
+      ".opencode/skills/p-aiws-change-list/SKILL.md",
+      ".claude/skills/p-aiws-change-new/SKILL.md",
+      ".opencode/skills/p-aiws-change-new/SKILL.md",
+      ".claude/skills/p-aiws-change-next/SKILL.md",
+      ".opencode/skills/p-aiws-change-next/SKILL.md",
+      ".claude/skills/p-aiws-change-start/SKILL.md",
+      ".opencode/skills/p-aiws-change-start/SKILL.md",
+      ".claude/skills/p-aiws-change-status/SKILL.md",
+      ".opencode/skills/p-aiws-change-status/SKILL.md",
+      ".claude/skills/p-aiws-change-sync/SKILL.md",
+      ".opencode/skills/p-aiws-change-sync/SKILL.md",
+      ".claude/skills/p-aiws-change-templates-init/SKILL.md",
+      ".opencode/skills/p-aiws-change-templates-init/SKILL.md",
+      ".claude/skills/p-aiws-change-templates-which/SKILL.md",
+      ".opencode/skills/p-aiws-change-templates-which/SKILL.md",
+      ".claude/skills/p-aiws-change-validate/SKILL.md",
+      ".opencode/skills/p-aiws-change-validate/SKILL.md",
+      ".claude/skills/p-aiws-hooks-install/SKILL.md",
+      ".opencode/skills/p-aiws-hooks-install/SKILL.md",
+      ".claude/skills/p-aiws-hooks-status/SKILL.md",
+      ".opencode/skills/p-aiws-hooks-status/SKILL.md",
+      ".claude/skills/using-aiws/SKILL.md",
+      ".opencode/skills/using-aiws/SKILL.md",
+      ".claude/skills/p-aiws-init/SKILL.md",
+      ".opencode/skills/p-aiws-init/SKILL.md",
+      ".claude/skills/p-aiws-rollback/SKILL.md",
+      ".opencode/skills/p-aiws-rollback/SKILL.md",
+      ".claude/skills/p-aiws-update/SKILL.md",
+      ".opencode/skills/p-aiws-update/SKILL.md",
+      ".claude/skills/p-aiws-validate/SKILL.md",
+      ".opencode/skills/p-aiws-validate/SKILL.md",
+      ".claude/skills/p-tasks-plan/SKILL.md",
+      ".opencode/skills/p-tasks-plan/SKILL.md",
+      ".claude/skills/ws-analyze/SKILL.md",
+      ".opencode/skills/ws-analyze/SKILL.md",
+      ".claude/skills/ws-bugfix/SKILL.md",
+      ".opencode/skills/ws-bugfix/SKILL.md",
+      ".claude/skills/ws-commit/SKILL.md",
+      ".opencode/skills/ws-commit/SKILL.md",
+      ".claude/skills/ws-deliver/SKILL.md",
+      ".opencode/skills/ws-deliver/SKILL.md",
+      ".claude/skills/ws-dev/SKILL.md",
+      ".opencode/skills/ws-dev/SKILL.md",
+      ".opencode/skills/ws-delegate/SKILL.md",
+      ".opencode/oh-my-opencode.json.example",
+      ".claude/skills/ws-finish/SKILL.md",
+      ".opencode/skills/ws-finish/SKILL.md",
+      ".claude/skills/ws-frontend-design/SKILL.md",
+      ".opencode/skills/ws-frontend-design/SKILL.md",
+      ".claude/skills/ws-handoff/SKILL.md",
+      ".opencode/skills/ws-handoff/SKILL.md",
+      ".claude/skills/ws-migrate/SKILL.md",
+      ".opencode/skills/ws-migrate/SKILL.md",
+      ".claude/skills/ws-plan/SKILL.md",
+      ".opencode/skills/ws-plan/SKILL.md",
+      ".claude/skills/ws-plan-verify/SKILL.md",
+      ".opencode/skills/ws-plan-verify/SKILL.md",
+      ".claude/skills/ws-preflight/SKILL.md",
+      ".opencode/skills/ws-preflight/SKILL.md",
+      ".claude/skills/ws-pull/SKILL.md",
+      ".opencode/skills/ws-pull/SKILL.md",
+      ".claude/skills/ws-push/SKILL.md",
+      ".opencode/skills/ws-push/SKILL.md",
+      ".claude/skills/ws-req-change/SKILL.md",
+      ".opencode/skills/ws-req-change/SKILL.md",
+      ".claude/skills/ws-req-contract-sync/SKILL.md",
+      ".opencode/skills/ws-req-contract-sync/SKILL.md",
+      ".claude/skills/ws-req-contract-validate/SKILL.md",
+      ".opencode/skills/ws-req-contract-validate/SKILL.md",
+      ".claude/skills/ws-req-flow-sync/SKILL.md",
+      ".opencode/skills/ws-req-flow-sync/SKILL.md",
+      ".claude/skills/ws-req-review/SKILL.md",
+      ".opencode/skills/ws-req-review/SKILL.md",
+      ".claude/skills/ws-review/SKILL.md",
+      ".opencode/skills/ws-review/SKILL.md",
+      ".claude/skills/ws-spec-review/SKILL.md",
+      ".opencode/skills/ws-spec-review/SKILL.md",
+      ".claude/skills/ws-quality-review/SKILL.md",
+      ".opencode/skills/ws-quality-review/SKILL.md",
+      ".claude/skills/ws-verify-before-complete/SKILL.md",
+      ".opencode/skills/ws-verify-before-complete/SKILL.md",
+      ".claude/skills/ws-rule/SKILL.md",
+      ".opencode/skills/ws-rule/SKILL.md",
+      ".claude/skills/ws-submodule-setup/SKILL.md",
+      ".opencode/skills/ws-submodule-setup/SKILL.md"
     ],
     "managed_blocks": {
       "AGENTS.md": [
@@ -513,6 +632,9 @@
       ".claude/commands/p-aiws-hooks-status.md": [
         "claude:aiws-hooks-status"
       ],
+      ".claude/commands/using-aiws.md": [
+        "claude:using-aiws"
+      ],
       ".claude/commands/ws-plan.md": [
         "claude:ws-plan"
       ],
@@ -525,6 +647,15 @@
       ".claude/commands/ws-bugfix.md": [
         "claude:ws-bugfix"
       ],
+      ".claude/commands/ws-spec-review.md": [
+        "claude:ws-spec-review"
+      ],
+      ".claude/commands/ws-quality-review.md": [
+        "claude:ws-quality-review"
+      ],
+      ".claude/commands/ws-verify-before-complete.md": [
+        "claude:ws-verify-before-complete"
+      ],
       ".opencode/command/p-aiws-change-archive.md": [
         "opencode:aiws-change-archive"
       ],
@@ -564,14 +695,158 @@
       ".opencode/command/p-aiws-hooks-status.md": [
         "opencode:aiws-hooks-status"
       ],
+      ".opencode/command/using-aiws.md": [
+        "opencode:using-aiws"
+      ],
       ".opencode/command/ws-plan.md": [
         "opencode:ws-plan"
       ],
+      ".opencode/command/ws-delegate.md": [
+        "opencode:ws-delegate"
+      ],
       ".opencode/command/ws-plan-verify.md": [
         "opencode:ws-plan-verify"
       ],
       ".opencode/command/ws-handoff.md": [
         "opencode:ws-handoff"
+      ],
+      ".opencode/command/ws-spec-review.md": [
+        "opencode:ws-spec-review"
+      ],
+      ".opencode/command/ws-quality-review.md": [
+        "opencode:ws-quality-review"
+      ],
+      ".opencode/command/ws-verify-before-complete.md": [
+        "opencode:ws-verify-before-complete"
+      ],
+      ".opencode/commands/p-aiws-change-archive.md": [
+        "opencode:aiws-change-archive"
+      ],
+      ".opencode/commands/p-aiws-change-finish.md": [
+        "opencode:aiws-change-finish"
+      ],
+      ".opencode/commands/p-aiws-change-list.md": [
+        "opencode:aiws-change-list"
+      ],
+      ".opencode/commands/p-aiws-change-new.md": [
+        "opencode:aiws-change-new"
+      ],
+      ".opencode/commands/p-aiws-change-next.md": [
+        "opencode:aiws-change-next"
+      ],
+      ".opencode/commands/p-aiws-change-start.md": [
+        "opencode:aiws-change-start"
+      ],
+      ".opencode/commands/p-aiws-change-status.md": [
+        "opencode:aiws-change-status"
+      ],
+      ".opencode/commands/p-aiws-change-sync.md": [
+        "opencode:aiws-change-sync"
+      ],
+      ".opencode/commands/p-aiws-change-templates-init.md": [
+        "opencode:aiws-change-templates-init"
+      ],
+      ".opencode/commands/p-aiws-change-templates-which.md": [
+        "opencode:aiws-change-templates-which"
+      ],
+      ".opencode/commands/p-aiws-change-validate.md": [
+        "opencode:aiws-change-validate"
+      ],
+      ".opencode/commands/p-aiws-hooks-install.md": [
+        "opencode:aiws-hooks-install"
+      ],
+      ".opencode/commands/p-aiws-hooks-status.md": [
+        "opencode:aiws-hooks-status"
+      ],
+      ".opencode/commands/using-aiws.md": [
+        "opencode:using-aiws"
+      ],
+      ".opencode/commands/p-aiws-init.md": [
+        "opencode:aiws-init"
+      ],
+      ".opencode/commands/p-aiws-rollback.md": [
+        "opencode:aiws-rollback"
+      ],
+      ".opencode/commands/p-aiws-update.md": [
+        "opencode:aiws-update"
+      ],
+      ".opencode/commands/p-aiws-validate.md": [
+        "opencode:aiws-validate"
+      ],
+      ".opencode/commands/ws-analyze.md": [
+        "opencode:ws-analyze"
+      ],
+      ".opencode/commands/ws-bugfix.md": [
+        "opencode:ws-bugfix"
+      ],
+      ".opencode/commands/ws-commit.md": [
+        "opencode:ws-commit"
+      ],
+      ".opencode/commands/ws-deliver.md": [
+        "opencode:ws-deliver"
+      ],
+      ".opencode/commands/ws-dev.md": [
+        "opencode:ws-dev"
+      ],
+      ".opencode/commands/ws-finish.md": [
+        "opencode:ws-finish"
+      ],
+      ".opencode/commands/ws-handoff.md": [
+        "opencode:ws-handoff"
+      ],
+      ".opencode/commands/ws-spec-review.md": [
+        "opencode:ws-spec-review"
+      ],
+      ".opencode/commands/ws-quality-review.md": [
+        "opencode:ws-quality-review"
+      ],
+      ".opencode/commands/ws-verify-before-complete.md": [
+        "opencode:ws-verify-before-complete"
+      ],
+      ".opencode/commands/ws-migrate.md": [
+        "opencode:ws-migrate"
+      ],
+      ".opencode/commands/ws-plan-verify.md": [
+        "opencode:ws-plan-verify"
+      ],
+      ".opencode/commands/ws-plan.md": [
+        "opencode:ws-plan"
+      ],
+      ".opencode/commands/ws-delegate.md": [
+        "opencode:ws-delegate"
+      ],
+      ".opencode/commands/ws-preflight.md": [
+        "opencode:ws-preflight"
+      ],
+      ".opencode/commands/ws-pull.md": [
+        "opencode:ws-pull"
+      ],
+      ".opencode/commands/ws-push.md": [
+        "opencode:ws-push"
+      ],
+      ".opencode/commands/ws-req-change.md": [
+        "opencode:ws-req-change"
+      ],
+      ".opencode/commands/ws-req-contract-sync.md": [
+        "opencode:ws-req-contract-sync"
+      ],
+      ".opencode/commands/ws-req-contract-validate.md": [
+        "opencode:ws-req-contract-validate"
+      ],
+      ".opencode/commands/ws-req-flow-sync.md": [
+        "opencode:ws-req-flow-sync"
+      ],
+      ".opencode/commands/ws-req-review.md": [
+        "opencode:ws-req-review"
+      ],
+      ".opencode/commands/ws-review.md": [
+        "opencode:ws-review"
+      ],
+      ".opencode/commands/ws-rule.md": [
+        "opencode:ws-rule"
+      ],
+      ".opencode/commands/ws-submodule-setup.md": [
+        "opencode:ws-submodule-setup"
       ]
     }
   }