@ai-ecoverse/wasix-ruby 3.4.11-2 → 3.4.11-4

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/core/ractor.rbs

@@ -1,1065 +0,0 @@
-# <!-- rdoc-file=ractor.rb -->
-# Ractor is an Actor-model abstraction for Ruby that provides thread-safe
-# parallel execution.
-#
-# Ractor.new makes a new Ractor, which can run in parallel.
-#
-#     # The simplest ractor
-#     r = Ractor.new {puts "I am in Ractor!"}
-#     r.take # wait for it to finish
-#     # Here, "I am in Ractor!" is printed
-#
-# Ractors do not share all objects with each other. There are two main benefits
-# to this: across ractors, thread-safety concerns such as data-races and
-# race-conditions are not possible. The other benefit is parallelism.
-#
-# To achieve this, object sharing is limited across ractors. For example, unlike
-# in threads, ractors can't access all the objects available in other ractors.
-# Even objects normally available through variables in the outer scope are
-# prohibited from being used across ractors.
-#
-#     a = 1
-#     r = Ractor.new {puts "I am in Ractor! a=#{a}"}
-#     # fails immediately with
-#     # ArgumentError (can not isolate a Proc because it accesses outer variables (a).)
-#
-# The object must be explicitly shared:
-#     a = 1
-#     r = Ractor.new(a) { |a1| puts "I am in Ractor! a=#{a1}"}
-#
-# On CRuby (the default implementation), Global Virtual Machine Lock (GVL) is
-# held per ractor, so ractors can perform in parallel without locking each
-# other. This is unlike the situation with threads on CRuby.
-#
-# Instead of accessing shared state, objects should be passed to and from
-# ractors by sending and receiving them as messages.
-#
-#     a = 1
-#     r = Ractor.new do
-#       a_in_ractor = receive # receive blocks until somebody passes a message
-#       puts "I am in Ractor! a=#{a_in_ractor}"
-#     end
-#     r.send(a)  # pass it
-#     r.take
-#     # Here, "I am in Ractor! a=1" is printed
-#
-# There are two pairs of methods for sending/receiving messages:
-#
-# *   Ractor#send and Ractor.receive for when the *sender* knows the receiver
-#     (push);
-# *   Ractor.yield and Ractor#take for when the *receiver* knows the sender
-#     (pull);
-#
-# In addition to that, any arguments passed to Ractor.new are passed to the
-# block and available there as if received by Ractor.receive, and the last block
-# value is sent outside of the ractor as if sent by Ractor.yield.
-#
-# A little demonstration of a classic ping-pong:
-#
-#     server = Ractor.new(name: "server") do
-#       puts "Server starts: #{self.inspect}"
-#       puts "Server sends: ping"
-#       Ractor.yield 'ping'                       # The server doesn't know the receiver and sends to whoever interested
-#       received = Ractor.receive                 # The server doesn't know the sender and receives from whoever sent
-#       puts "Server received: #{received}"
-#     end
-#
-#     client = Ractor.new(server) do |srv|        # The server is sent to the client, and available as srv
-#       puts "Client starts: #{self.inspect}"
-#       received = srv.take                       # The client takes a message from the server
-#       puts "Client received from " \
-#            "#{srv.inspect}: #{received}"
-#       puts "Client sends to " \
-#            "#{srv.inspect}: pong"
-#       srv.send 'pong'                           # The client sends a message to the server
-#     end
-#
-#     [client, server].each(&:take)               # Wait until they both finish
-#
-# This will output something like:
-#
-#     Server starts: #<Ractor:#2 server test.rb:1 running>
-#     Server sends: ping
-#     Client starts: #<Ractor:#3 test.rb:8 running>
-#     Client received from #<Ractor:#2 server test.rb:1 blocking>: ping
-#     Client sends to #<Ractor:#2 server test.rb:1 blocking>: pong
-#     Server received: pong
-#
-# Ractors receive their messages via the *incoming port*, and send them to the
-# *outgoing port*. Either one can be disabled with Ractor#close_incoming and
-# Ractor#close_outgoing, respectively. When a ractor terminates, its ports are
-# closed automatically.
-#
-# ## Shareable and unshareable objects
-#
-# When an object is sent to and from a ractor, it's important to understand
-# whether the object is shareable or unshareable. Most Ruby objects are
-# unshareable objects. Even frozen objects can be unshareable if they contain
-# (through their instance variables) unfrozen objects.
-#
-# Shareable objects are those which can be used by several threads without
-# compromising thread-safety, for example numbers, `true` and `false`.
-# Ractor.shareable? allows you to check this, and Ractor.make_shareable tries to
-# make the object shareable if it's not already, and gives an error if it can't
-# do it.
-#
-#     Ractor.shareable?(1)            #=> true -- numbers and other immutable basic values are shareable
-#     Ractor.shareable?('foo')        #=> false, unless the string is frozen due to # frozen_string_literal: true
-#     Ractor.shareable?('foo'.freeze) #=> true
-#     Ractor.shareable?([Object.new].freeze) #=> false, inner object is unfrozen
-#
-#     ary = ['hello', 'world']
-#     ary.frozen?                 #=> false
-#     ary[0].frozen?              #=> false
-#     Ractor.make_shareable(ary)
-#     ary.frozen?                 #=> true
-#     ary[0].frozen?              #=> true
-#     ary[1].frozen?              #=> true
-#
-# When a shareable object is sent (via #send or Ractor.yield), no additional
-# processing occurs on it. It just becomes usable by both ractors. When an
-# unshareable object is sent, it can be either *copied* or *moved*. The first is
-# the default, and it copies the object fully by deep cloning (Object#clone) the
-# non-shareable parts of its structure.
-#
-#     data = ['foo', 'bar'.freeze]
-#     r = Ractor.new do
-#       data2 = Ractor.receive
-#       puts "In ractor: #{data2.object_id}, #{data2[0].object_id}, #{data2[1].object_id}"
-#     end
-#     r.send(data)
-#     r.take
-#     puts "Outside  : #{data.object_id}, #{data[0].object_id}, #{data[1].object_id}"
-#
-# This will output something like:
-#
-#     In ractor: 340, 360, 320
-#     Outside  : 380, 400, 320
-#
-# Note that the object ids of the array and the non-frozen string inside the
-# array have changed in the ractor because they are different objects. The
-# second array's element, which is a shareable frozen string, is the same
-# object.
-#
-# Deep cloning of objects may be slow, and sometimes impossible. Alternatively,
-# `move: true` may be used during sending. This will *move* the unshareable
-# object to the receiving ractor, making it inaccessible to the sending ractor.
-#
-#     data = ['foo', 'bar']
-#     r = Ractor.new do
-#       data_in_ractor = Ractor.receive
-#       puts "In ractor: #{data_in_ractor.object_id}, #{data_in_ractor[0].object_id}"
-#     end
-#     r.send(data, move: true)
-#     r.take
-#     puts "Outside: moved? #{Ractor::MovedObject === data}"
-#     puts "Outside: #{data.inspect}"
-#
-# This will output:
-#
-#     In ractor: 100, 120
-#     Outside: moved? true
-#     test.rb:9:in `method_missing': can not send any methods to a moved object (Ractor::MovedError)
-#
-# Notice that even `inspect` (and more basic methods like `__id__`) is
-# inaccessible on a moved object.
-#
-# Class and Module objects are shareable so the class/module definitions are
-# shared between ractors. Ractor objects are also shareable. All operations on
-# shareable objects are thread-safe, so the thread-safety property will be kept.
-# We can not define mutable shareable objects in Ruby, but C extensions can
-# introduce them.
-#
-# It is prohibited to access (get) instance variables of shareable objects in
-# other ractors if the values of the variables aren't shareable. This can occur
-# because modules/classes are shareable, but they can have instance variables
-# whose values are not. In non-main ractors, it's also prohibited to set
-# instance variables on classes/modules (even if the value is shareable).
-#
-#     class C
-#       class << self
-#         attr_accessor :tricky
-#       end
-#     end
-#
-#     C.tricky = "unshareable".dup
-#
-#     r = Ractor.new(C) do |cls|
-#       puts "I see #{cls}"
-#       puts "I can't see #{cls.tricky}"
-#       cls.tricky = true # doesn't get here, but this would also raise an error
-#     end
-#     r.take
-#     # I see C
-#     # can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
-#
-# Ractors can access constants if they are shareable. The main Ractor is the
-# only one that can access non-shareable constants.
-#
-#     GOOD = 'good'.freeze
-#     BAD = 'bad'.dup
-#
-#     r = Ractor.new do
-#       puts "GOOD=#{GOOD}"
-#       puts "BAD=#{BAD}"
-#     end
-#     r.take
-#     # GOOD=good
-#     # can not access non-shareable objects in constant Object::BAD by non-main Ractor. (NameError)
-#
-#     # Consider the same C class from above
-#
-#     r = Ractor.new do
-#       puts "I see #{C}"
-#       puts "I can't see #{C.tricky}"
-#     end
-#     r.take
-#     # I see C
-#     # can not access instance variables of classes/modules from non-main Ractors (RuntimeError)
-#
-# See also the description of `# shareable_constant_value` pragma in [Comments
-# syntax](rdoc-ref:syntax/comments.rdoc) explanation.
-#
-# ## Ractors vs threads
-#
-# Each ractor has its own main Thread. New threads can be created from inside
-# ractors (and, on CRuby, they share the GVL with other threads of this ractor).
-#
-#     r = Ractor.new do
-#       a = 1
-#       Thread.new {puts "Thread in ractor: a=#{a}"}.join
-#     end
-#     r.take
-#     # Here "Thread in ractor: a=1" will be printed
-#
-# ## Note on code examples
-#
-# In the examples below, sometimes we use the following method to wait for
-# ractors that are not currently blocked to finish (or to make progress).
-#
-#     def wait
-#       sleep(0.1)
-#     end
-#
-# It is **only for demonstration purposes** and shouldn't be used in a real
-# code. Most of the time, #take is used to wait for ractors to finish.
-#
-# ## Reference
-#
-# See [Ractor design doc](rdoc-ref:ractor.md) for more details.
-#
-class Ractor
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - _require(feature)
-  # -->
-  # internal method
-  #
-  def self._require: (String feature) -> bool
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - [](sym)
-  # -->
-  # get a value from ractor-local storage of current Ractor
-  #
-  def self.[]: (Symbol) -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - []=(sym, val)
-  # -->
-  # set a value in ractor-local storage of current Ractor
-  #
-  def self.[]=: (Symbol, untyped) -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - count()
-  # -->
-  # Returns the number of Ractors currently running or blocking (waiting).
-  #
-  #     Ractor.count                   #=> 1
-  #     r = Ractor.new(name: 'example') { Ractor.yield(1) }
-  #     Ractor.count                   #=> 2 (main + example ractor)
-  #     r.take                         # wait for Ractor.yield(1)
-  #     r.take                         # wait until r will finish
-  #     Ractor.count                   #=> 1
-  #
-  def self.count: () -> Integer
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - current()
-  # -->
-  # Returns the currently executing Ractor.
-  #
-  #     Ractor.current #=> #<Ractor:#1 running>
-  #
-  def self.current: () -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - main()
-  # -->
-  # returns main ractor
-  #
-  def self.main: () -> Ractor
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - main?()
-  # -->
-  # return true if the current ractor is main ractor
-  #
-  def self.main?: () -> boolish
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.make_shareable(obj, copy: false) -> shareable_obj
-  # -->
-  # Make `obj` shareable between ractors.
-  #
-  # `obj` and all the objects it refers to will be frozen, unless they are already
-  # shareable.
-  #
-  # If `copy` keyword is `true`, it will copy objects before freezing them, and
-  # will not modify `obj` or its internal objects.
-  #
-  # Note that the specification and implementation of this method are not mature
-  # and may be changed in the future.
-  #
-  #     obj = ['test']
-  #     Ractor.shareable?(obj)     #=> false
-  #     Ractor.make_shareable(obj) #=> ["test"]
-  #     Ractor.shareable?(obj)     #=> true
-  #     obj.frozen?                #=> true
-  #     obj[0].frozen?             #=> true
-  #
-  #     # Copy vs non-copy versions:
-  #     obj1 = ['test']
-  #     obj1s = Ractor.make_shareable(obj1)
-  #     obj1.frozen?                        #=> true
-  #     obj1s.object_id == obj1.object_id   #=> true
-  #     obj2 = ['test']
-  #     obj2s = Ractor.make_shareable(obj2, copy: true)
-  #     obj2.frozen?                        #=> false
-  #     obj2s.frozen?                       #=> true
-  #     obj2s.object_id == obj2.object_id   #=> false
-  #     obj2s[0].object_id == obj2[0].object_id #=> false
-  #
-  # See also the "Shareable and unshareable objects" section in the Ractor class
-  # docs.
-  #
-  def self.make_shareable: [T] (T obj, ?copy: boolish) -> T
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.new(*args, name: nil) {|*args| block } -> ractor
-  # -->
-  # Create a new Ractor with args and a block.
-  #
-  # The given block (Proc) will be isolated (can't access any outer variables).
-  # `self` inside the block will refer to the current Ractor.
-  #
-  #     r = Ractor.new { puts "Hi, I am #{self.inspect}" }
-  #     r.take
-  #     # Prints "Hi, I am #<Ractor:#2 test.rb:1 running>"
-  #
-  # Any `args` passed are propagated to the block arguments by the same rules as
-  # objects sent via #send/Ractor.receive. If an argument in `args` is not
-  # shareable, it will be copied (via deep cloning, which might be inefficient).
-  #
-  #     arg = [1, 2, 3]
-  #     puts "Passing: #{arg} (##{arg.object_id})"
-  #     r = Ractor.new(arg) {|received_arg|
-  #       puts "Received: #{received_arg} (##{received_arg.object_id})"
-  #     }
-  #     r.take
-  #     # Prints:
-  #     #   Passing: [1, 2, 3] (#280)
-  #     #   Received: [1, 2, 3] (#300)
-  #
-  # Ractor's `name` can be set for debugging purposes:
-  #
-  #     r = Ractor.new(name: 'my ractor') {}; r.take
-  #     p r
-  #     #=> #<Ractor:#3 my ractor test.rb:1 terminated>
-  #
-  def self.new: (*untyped args, ?name: string) { (?) -> untyped } -> Ractor
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.receive -> msg
-  # -->
-  # Receive a message from the incoming port of the current ractor (which was sent
-  # there by #send from another ractor).
-  #
-  #     r = Ractor.new do
-  #       v1 = Ractor.receive
-  #       puts "Received: #{v1}"
-  #     end
-  #     r.send('message1')
-  #     r.take
-  #     # Here will be printed: "Received: message1"
-  #
-  # Alternatively, the private instance method `receive` may be used:
-  #
-  #     r = Ractor.new do
-  #       v1 = receive
-  #       puts "Received: #{v1}"
-  #     end
-  #     r.send('message1')
-  #     r.take
-  #     # This prints: "Received: message1"
-  #
-  # The method blocks if the queue is empty.
-  #
-  #     r = Ractor.new do
-  #       puts "Before first receive"
-  #       v1 = Ractor.receive
-  #       puts "Received: #{v1}"
-  #       v2 = Ractor.receive
-  #       puts "Received: #{v2}"
-  #     end
-  #     wait
-  #     puts "Still not received"
-  #     r.send('message1')
-  #     wait
-  #     puts "Still received only one"
-  #     r.send('message2')
-  #     r.take
-  #
-  # Output:
-  #
-  #     Before first receive
-  #     Still not received
-  #     Received: message1
-  #     Still received only one
-  #     Received: message2
-  #
-  # If close_incoming was called on the ractor, the method raises
-  # Ractor::ClosedError if there are no more messages in the incoming queue:
-  #
-  #     Ractor.new do
-  #       close_incoming
-  #       receive
-  #     end
-  #     wait
-  #     # in `receive': The incoming port is already closed => #<Ractor:#2 test.rb:1 running> (Ractor::ClosedError)
-  #
-  def self.receive: () -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.receive_if {|msg| block } -> msg
-  # -->
-  # Receive only a specific message.
-  #
-  # Instead of Ractor.receive, Ractor.receive_if can be given a pattern (or any
-  # filter) in a block and you can choose the messages to accept that are
-  # available in your ractor's incoming queue.
-  #
-  #     r = Ractor.new do
-  #       p Ractor.receive_if{|msg| msg.match?(/foo/)} #=> "foo3"
-  #       p Ractor.receive_if{|msg| msg.match?(/bar/)} #=> "bar1"
-  #       p Ractor.receive_if{|msg| msg.match?(/baz/)} #=> "baz2"
-  #     end
-  #     r << "bar1"
-  #     r << "baz2"
-  #     r << "foo3"
-  #     r.take
-  #
-  # This will output:
-  #
-  #     foo3
-  #     bar1
-  #     baz2
-  #
-  # If the block returns a truthy value, the message is removed from the incoming
-  # queue and returned. Otherwise, the message remains in the incoming queue and
-  # the next messages are checked by the given block.
-  #
-  # If there are no messages left in the incoming queue, the method will block
-  # until new messages arrive.
-  #
-  # If the block is escaped by break/return/exception/throw, the message is
-  # removed from the incoming queue as if a truthy value had been returned.
-  #
-  #     r = Ractor.new do
-  #       val = Ractor.receive_if{|msg| msg.is_a?(Array)}
-  #       puts "Received successfully: #{val}"
-  #     end
-  #
-  #     r.send(1)
-  #     r.send('test')
-  #     wait
-  #     puts "2 non-matching sent, nothing received"
-  #     r.send([1, 2, 3])
-  #     wait
-  #
-  # Prints:
-  #
-  #     2 non-matching sent, nothing received
-  #     Received successfully: [1, 2, 3]
-  #
-  # Note that you can not call receive/receive_if in the given block recursively.
-  # You should not do any tasks in the block other than message filtration.
-  #
-  #     Ractor.current << true
-  #     Ractor.receive_if{|msg| Ractor.receive}
-  #     #=> `receive': can not call receive/receive_if recursively (Ractor::Error)
-  #
-  def self.receive_if: () { (untyped) -> boolish } -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - recv()
-  # -->
-  #
-  alias self.recv self.receive
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.select(*ractors, [yield_value:, move: false]) -> [ractor or symbol, obj]
-  # -->
-  # Wait for any ractor to have something in its outgoing port, read from this
-  # ractor, and then return that ractor and the object received.
-  #
-  #     r1 = Ractor.new {Ractor.yield 'from 1'}
-  #     r2 = Ractor.new {Ractor.yield 'from 2'}
-  #
-  #     r, obj = Ractor.select(r1, r2)
-  #
-  #     puts "received #{obj.inspect} from #{r.inspect}"
-  #     # Prints: received "from 1" from #<Ractor:#2 test.rb:1 running>
-  #     # But could just as well print "from r2" here, either prints could be first.
-  #
-  # If one of the given ractors is the current ractor, and it is selected, `r`
-  # will contain the `:receive` symbol instead of the ractor object.
-  #
-  #     r1 = Ractor.new(Ractor.current) do |main|
-  #       main.send 'to main'
-  #       Ractor.yield 'from 1'
-  #     end
-  #     r2 = Ractor.new do
-  #       Ractor.yield 'from 2'
-  #     end
-  #
-  #     r, obj = Ractor.select(r1, r2, Ractor.current)
-  #     puts "received #{obj.inspect} from #{r.inspect}"
-  #     # Could print: received "to main" from :receive
-  #
-  # If `yield_value` is provided, that value may be yielded if another ractor is
-  # calling #take. In this case, the pair `[:yield, nil]` is returned:
-  #
-  #     r1 = Ractor.new(Ractor.current) do |main|
-  #       puts "Received from main: #{main.take}"
-  #     end
-  #
-  #     puts "Trying to select"
-  #     r, obj = Ractor.select(r1, Ractor.current, yield_value: 123)
-  #     wait
-  #     puts "Received #{obj.inspect} from #{r.inspect}"
-  #
-  # This will print:
-  #
-  #     Trying to select
-  #     Received from main: 123
-  #     Received nil from :yield
-  #
-  # `move` boolean flag defines whether yielded value will be copied (default) or
-  # moved.
-  #
-  def self.select: (*Ractor ractors, ?move: boolish, ?yield_value: untyped) -> [ Ractor | Symbol, untyped ]
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.shareable?(obj) -> true | false
-  # -->
-  # Checks if the object is shareable by ractors.
-  #
-  #     Ractor.shareable?(1)            #=> true -- numbers and other immutable basic values are frozen
-  #     Ractor.shareable?('foo')        #=> false, unless the string is frozen due to # frozen_string_literal: true
-  #     Ractor.shareable?('foo'.freeze) #=> true
-  #
-  # See also the "Shareable and unshareable objects" section in the Ractor class
-  # docs.
-  #
-  def self.shareable?: (untyped obj) -> bool
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.store_if_absent(key){ init_block }
-  # -->
-  # If the correponding value is not set, yield a value with init_block and store
-  # the value in thread-safe manner. This method returns corresponding stored
-  # value.
-  #
-  #     (1..10).map{
-  #       Thread.new(it){|i|
-  #         Ractor.store_if_absent(:s){ f(); i }
-  #         #=> return stored value of key :s
-  #       }
-  #     }.map(&:value).uniq.size #=> 1 and f() is called only once
-  #
-  def self.store_if_absent: (Symbol) { () -> untyped } -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - Ractor.yield(msg, move: false) -> nil
-  # -->
-  # Send a message to the current ractor's outgoing port to be accepted by #take.
-  #
-  #     r = Ractor.new {Ractor.yield 'Hello from ractor'}
-  #     puts r.take
-  #     # Prints: "Hello from ractor"
-  #
-  # This method is blocking, and will return only when somebody consumes the sent
-  # message.
-  #
-  #     r = Ractor.new do
-  #       Ractor.yield 'Hello from ractor'
-  #       puts "Ractor: after yield"
-  #     end
-  #     wait
-  #     puts "Still not taken"
-  #     puts r.take
-  #
-  # This will print:
-  #
-  #     Still not taken
-  #     Hello from ractor
-  #     Ractor: after yield
-  #
-  # If the outgoing port was closed with #close_outgoing, the method will raise:
-  #
-  #     r = Ractor.new do
-  #       close_outgoing
-  #       Ractor.yield 'Hello from ractor'
-  #     end
-  #     wait
-  #     # `yield': The outgoing-port is already closed (Ractor::ClosedError)
-  #
-  # The meaning of the `move` argument is the same as for #send.
-  #
-  def self.yield: (untyped obj, ?move: boolish) -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - <<(obj, move: false)
-  # -->
-  #
-  alias << send
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - [](sym)
-  # -->
-  # get a value from ractor-local storage of current Ractor Obsolete and use
-  # Ractor.[] instead.
-  #
-  def []: (interned sym) -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - []=(sym, val)
-  # -->
-  # set a value in ractor-local storage of current Ractor Obsolete and use
-  # Ractor.[]= instead.
-  #
-  def []=: [T] (interned sym, T val) -> T
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - ractor.close_incoming -> true | false
-  # -->
-  # Closes the incoming port and returns whether it was already closed. All
-  # further attempts to Ractor.receive in the ractor, and #send to the ractor will
-  # fail with Ractor::ClosedError.
-  #
-  #     r = Ractor.new {sleep(500)}
-  #     r.close_incoming  #=> false
-  #     r.close_incoming  #=> true
-  #     r.send('test')
-  #     # Ractor::ClosedError (The incoming-port is already closed)
-  #
-  def close_incoming: () -> bool
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - ractor.close_outgoing -> true | false
-  # -->
-  # Closes the outgoing port and returns whether it was already closed. All
-  # further attempts to Ractor.yield in the ractor, and #take from the ractor will
-  # fail with Ractor::ClosedError.
-  #
-  #     r = Ractor.new {sleep(500)}
-  #     r.close_outgoing  #=> false
-  #     r.close_outgoing  #=> true
-  #     r.take
-  #     # Ractor::ClosedError (The outgoing-port is already closed)
-  #
-  def close_outgoing: () -> bool
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - inspect()
-  # -->
-  #
-  def inspect: () -> String
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - name()
-  # -->
-  # The name set in Ractor.new, or `nil`.
-  #
-  def name: () -> String?
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - ractor.send(msg, move: false) -> self
-  # -->
-  # Send a message to a Ractor's incoming queue to be accepted by Ractor.receive.
-  #
-  #     r = Ractor.new do
-  #       value = Ractor.receive
-  #       puts "Received #{value}"
-  #     end
-  #     r.send 'message'
-  #     # Prints: "Received: message"
-  #
-  # The method is non-blocking (will return immediately even if the ractor is not
-  # ready to receive anything):
-  #
-  #     r = Ractor.new {sleep(5)}
-  #     r.send('test')
-  #     puts "Sent successfully"
-  #     # Prints: "Sent successfully" immediately
-  #
-  # An attempt to send to a ractor which already finished its execution will raise
-  # Ractor::ClosedError.
-  #
-  #     r = Ractor.new {}
-  #     r.take
-  #     p r
-  #     # "#<Ractor:#6 (irb):23 terminated>"
-  #     r.send('test')
-  #     # Ractor::ClosedError (The incoming-port is already closed)
-  #
-  # If close_incoming was called on the ractor, the method also raises
-  # Ractor::ClosedError.
-  #
-  #     r =  Ractor.new do
-  #       sleep(500)
-  #       receive
-  #     end
-  #     r.close_incoming
-  #     r.send('test')
-  #     # Ractor::ClosedError (The incoming-port is already closed)
-  #     # The error is raised immediately, not when the ractor tries to receive
-  #
-  # If the `obj` is unshareable, by default it will be copied into the receiving
-  # ractor by deep cloning. If `move: true` is passed, the object is *moved* into
-  # the receiving ractor and becomes inaccessible to the sender.
-  #
-  #     r = Ractor.new {puts "Received: #{receive}"}
-  #     msg = 'message'
-  #     r.send(msg, move: true)
-  #     r.take
-  #     p msg
-  #
-  # This prints:
-  #
-  #     Received: message
-  #     in `p': undefined method `inspect' for #<Ractor::MovedObject:0x000055c99b9b69b8>
-  #
-  # All references to the object and its parts will become invalid to the sender.
-  #
-  #     r = Ractor.new {puts "Received: #{receive}"}
-  #     s = 'message'
-  #     ary = [s]
-  #     copy = ary.dup
-  #     r.send(ary, move: true)
-  #
-  #     s.inspect
-  #     # Ractor::MovedError (can not send any methods to a moved object)
-  #     ary.class
-  #     # Ractor::MovedError (can not send any methods to a moved object)
-  #     copy.class
-  #     # => Array, it is different object
-  #     copy[0].inspect
-  #     # Ractor::MovedError (can not send any methods to a moved object)
-  #     # ...but its item was still a reference to `s`, which was moved
-  #
-  # If the object is shareable, `move: true` has no effect on it:
-  #
-  #     r = Ractor.new {puts "Received: #{receive}"}
-  #     s = 'message'.freeze
-  #     r.send(s, move: true)
-  #     s.inspect #=> "message", still available
-  #
-  def send: (untyped obj, ?move: boolish) -> Ractor
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - ractor.take -> msg
-  # -->
-  # Get a message from the ractor's outgoing port, which was put there by
-  # Ractor.yield or at ractor's termination.
-  #
-  #     r = Ractor.new do
-  #       Ractor.yield 'explicit yield'
-  #       'last value'
-  #     end
-  #     puts r.take #=> 'explicit yield'
-  #     puts r.take #=> 'last value'
-  #     puts r.take # Ractor::ClosedError (The outgoing-port is already closed)
-  #
-  # The fact that the last value is also sent to the outgoing port means that
-  # `take` can be used as an analog of Thread#join ("just wait until ractor
-  # finishes"). However, it will raise if somebody has already consumed that
-  # message.
-  #
-  # If the outgoing port was closed with #close_outgoing, the method will raise
-  # Ractor::ClosedError.
-  #
-  #     r = Ractor.new do
-  #       sleep(500)
-  #       Ractor.yield 'Hello from ractor'
-  #     end
-  #     r.close_outgoing
-  #     r.take
-  #     # Ractor::ClosedError (The outgoing-port is already closed)
-  #     # The error would be raised immediately, not when ractor will try to receive
-  #
-  # If an uncaught exception is raised in the Ractor, it is propagated by take as
-  # a Ractor::RemoteError.
-  #
-  #     r = Ractor.new {raise "Something weird happened"}
-  #
-  #     begin
-  #       r.take
-  #     rescue => e
-  #       p e              #  => #<Ractor::RemoteError: thrown by remote Ractor.>
-  #       p e.ractor == r  # => true
-  #       p e.cause        # => #<RuntimeError: Something weird happened>
-  #     end
-  #
-  # Ractor::ClosedError is a descendant of StopIteration, so the termination of
-  # the ractor will break out of any loops that receive this message without
-  # propagating the error:
-  #
-  #     r = Ractor.new do
-  #       3.times {|i| Ractor.yield "message #{i}"}
-  #       "finishing"
-  #     end
-  #
-  #     loop {puts "Received: " + r.take}
-  #     puts "Continue successfully"
-  #
-  # This will print:
-  #
-  #     Received: message 0
-  #     Received: message 1
-  #     Received: message 2
-  #     Received: finishing
-  #     Continue successfully
-  #
-  def take: () -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - to_s()
-  # -->
-  #
-  alias to_s inspect
-
-  private
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - receive()
-  # -->
-  # same as Ractor.receive
-  #
-  def receive: () -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - receive_if(&b)
-  # -->
-  # same as Ractor.receive_if
-  #
-  def receive_if: () { (untyped) -> boolish } -> untyped
-
-  # <!--
-  #   rdoc-file=ractor.rb
-  #   - recv()
-  # -->
-  #
-  alias recv receive
-
-  # <!-- rdoc-file=ractor.c -->
-  # Raised when an attempt is made to send a message to a closed port, or to
-  # retrieve a message from a closed and empty port. Ports may be closed
-  # explicitly with Ractor#close_outgoing/close_incoming and are closed implicitly
-  # when a Ractor terminates.
-  #
-  #     r = Ractor.new { sleep(500) }
-  #     r.close_outgoing
-  #     r.take # Ractor::ClosedError
-  #
-  # ClosedError is a descendant of StopIteration, so the closing of the ractor
-  # will break the loops without propagating the error:
-  #
-  #     r = Ractor.new do
-  #       loop do
-  #         msg = receive # raises ClosedError and loop traps it
-  #         puts "Received: #{msg}"
-  #       end
-  #       puts "loop exited"
-  #     end
-  #
-  #     3.times{|i| r << i}
-  #     r.close_incoming
-  #     r.take
-  #     puts "Continue successfully"
-  #
-  # This will print:
-  #
-  #     Received: 0
-  #     Received: 1
-  #     Received: 2
-  #     loop exited
-  #     Continue successfully
-  #
-  class ClosedError < StopIteration
-  end
-
-  class Error < RuntimeError
-  end
-
-  class IsolationError < Ractor::Error
-  end
-
-  # <!-- rdoc-file=ractor.c -->
-  # Raised on an attempt to access an object which was moved in Ractor#send or
-  # Ractor.yield.
-  #
-  #     r = Ractor.new { sleep }
-  #
-  #     ary = [1, 2, 3]
-  #     r.send(ary, move: true)
-  #     ary.inspect
-  #     # Ractor::MovedError (can not send any methods to a moved object)
-  #
-  class MovedError < Ractor::Error
-  end
-
-  # <!-- rdoc-file=ractor.c -->
-  # A special object which replaces any value that was moved to another ractor in
-  # Ractor#send or Ractor.yield. Any attempt to access the object results in
-  # Ractor::MovedError.
-  #
-  #     r = Ractor.new { receive }
-  #
-  #     ary = [1, 2, 3]
-  #     r.send(ary, move: true)
-  #     p Ractor::MovedObject === ary
-  #     # => true
-  #     ary.inspect
-  #     # Ractor::MovedError (can not send any methods to a moved object)
-  #
-  class MovedObject < BasicObject
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - !(*args)
-    # -->
-    #
-    def !: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - !=(*args)
-    # -->
-    #
-    def !=: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - ==(*args)
-    # -->
-    #
-    def ==: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - __id__(*args)
-    # -->
-    #
-    def __id__: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - __send__(*args)
-    # -->
-    #
-    def __send__: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - equal?(*args)
-    # -->
-    #
-    def equal?: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - instance_eval(*args)
-    # -->
-    #
-    def instance_eval: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - instance_exec(*args)
-    # -->
-    #
-    def instance_exec: (*untyped) -> untyped
-
-    # <!--
-    #   rdoc-file=ractor.c
-    #   - method_missing(*args)
-    # -->
-    #
-    def method_missing: (*untyped) -> untyped
-  end
-
-  # <!-- rdoc-file=ractor.c -->
-  # Raised on attempt to Ractor#take if there was an uncaught exception in the
-  # Ractor. Its `cause` will contain the original exception, and `ractor` is the
-  # original ractor it was raised in.
-  #
-  #     r = Ractor.new { raise "Something weird happened" }
-  #
-  #     begin
-  #       r.take
-  #     rescue => e
-  #       p e             # => #<Ractor::RemoteError: thrown by remote Ractor.>
-  #       p e.ractor == r # => true
-  #       p e.cause       # => #<RuntimeError: Something weird happened>
-  #     end
-  #
-  class RemoteError < Ractor::Error
-    def ractor: () -> Ractor
-  end
-
-  class UnsafeError < Ractor::Error
-  end
-
-  %a{annotate:rdoc:skip}
-  class Selector
-  end
-end