@ai-ecoverse/wasix-ruby 3.4.11-2 → 3.4.11-4

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/core/fiber.rbs

@@ -1,550 +0,0 @@
-# <!-- rdoc-file=cont.c -->
-# Fibers are primitives for implementing light weight cooperative concurrency in
-# Ruby. Basically they are a means of creating code blocks that can be paused
-# and resumed, much like threads. The main difference is that they are never
-# preempted and that the scheduling must be done by the programmer and not the
-# VM.
-#
-# As opposed to other stackless light weight concurrency models, each fiber
-# comes with a stack.  This enables the fiber to be paused from deeply nested
-# function calls within the fiber block.  See the ruby(1) manpage to configure
-# the size of the fiber stack(s).
-#
-# When a fiber is created it will not run automatically. Rather it must be
-# explicitly asked to run using the Fiber#resume method. The code running inside
-# the fiber can give up control by calling Fiber.yield in which case it yields
-# control back to caller (the caller of the Fiber#resume).
-#
-# Upon yielding or termination the Fiber returns the value of the last executed
-# expression
-#
-# For instance:
-#
-#     fiber = Fiber.new do
-#       Fiber.yield 1
-#       2
-#     end
-#
-#     puts fiber.resume
-#     puts fiber.resume
-#     puts fiber.resume
-#
-# *produces*
-#
-#     1
-#     2
-#     FiberError: dead fiber called
-#
-# The Fiber#resume method accepts an arbitrary number of parameters, if it is
-# the first call to #resume then they will be passed as block arguments.
-# Otherwise they will be the return value of the call to Fiber.yield
-#
-# Example:
-#
-#     fiber = Fiber.new do |first|
-#       second = Fiber.yield first + 2
-#     end
-#
-#     puts fiber.resume 10
-#     puts fiber.resume 1_000_000
-#     puts fiber.resume "The fiber will be dead before I can cause trouble"
-#
-# *produces*
-#
-#     12
-#     1000000
-#     FiberError: dead fiber called
-#
-# ## Non-blocking Fibers
-#
-# The concept of *non-blocking fiber* was introduced in Ruby 3.0. A non-blocking
-# fiber, when reaching a operation that would normally block the fiber (like
-# `sleep`, or wait for another process or I/O) will yield control to other
-# fibers and allow the *scheduler* to handle blocking and waking up (resuming)
-# this fiber when it can proceed.
-#
-# For a Fiber to behave as non-blocking, it need to be created in Fiber.new with
-# `blocking: false` (which is the default), and Fiber.scheduler should be set
-# with Fiber.set_scheduler. If Fiber.scheduler is not set in the current thread,
-# blocking and non-blocking fibers' behavior is identical.
-#
-# Ruby doesn't provide a scheduler class: it is expected to be implemented by
-# the user and correspond to Fiber::Scheduler.
-#
-# There is also Fiber.schedule method, which is expected to immediately perform
-# the given block in a non-blocking manner. Its actual implementation is up to
-# the scheduler.
-#
-class Fiber < Object
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber[key] -> value
-  # -->
-  # Returns the value of the fiber storage variable identified by `key`.
-  #
-  # The `key` must be a symbol, and the value is set by Fiber#[]= or Fiber#store.
-  #
-  # See also Fiber::[]=.
-  #
-  def self.[]: (Symbol) -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber[key] = value
-  # -->
-  # Assign `value` to the fiber storage variable identified by `key`. The variable
-  # is created if it doesn't exist.
-  #
-  # `key` must be a Symbol, otherwise a TypeError is raised.
-  #
-  # See also Fiber::[].
-  #
-  def self.[]=: [A] (Symbol, A) -> A
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.blocking? -> false or 1
-  # -->
-  # Returns `false` if the current fiber is non-blocking. Fiber is non-blocking if
-  # it was created via passing `blocking: false` to Fiber.new, or via
-  # Fiber.schedule.
-  #
-  # If the current Fiber is blocking, the method returns 1. Future developments
-  # may allow for situations where larger integers could be returned.
-  #
-  # Note that, even if the method returns `false`, Fiber behaves differently only
-  # if Fiber.scheduler is set in the current thread.
-  #
-  # See the "Non-blocking fibers" section in class docs for details.
-  #
-  def self.blocking?: () -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.current -> fiber
-  # -->
-  # Returns the current fiber. If you are not running in the context of a fiber
-  # this method will return the root fiber.
-  #
-  def self.current: () -> Fiber
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.current_scheduler -> obj or nil
-  # -->
-  # Returns the Fiber scheduler, that was last set for the current thread with
-  # Fiber.set_scheduler if and only if the current fiber is non-blocking.
-  #
-  def self.current_scheduler: () -> untyped?
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.schedule { |*args| ... } -> fiber
-  # -->
-  # The method is *expected* to immediately run the provided block of code in a
-  # separate non-blocking fiber.
-  #
-  #     puts "Go to sleep!"
-  #
-  #     Fiber.set_scheduler(MyScheduler.new)
-  #
-  #     Fiber.schedule do
-  #       puts "Going to sleep"
-  #       sleep(1)
-  #       puts "I slept well"
-  #     end
-  #
-  #     puts "Wakey-wakey, sleepyhead"
-  #
-  # Assuming MyScheduler is properly implemented, this program will produce:
-  #
-  #     Go to sleep!
-  #     Going to sleep
-  #     Wakey-wakey, sleepyhead
-  #     ...1 sec pause here...
-  #     I slept well
-  #
-  # ...e.g. on the first blocking operation inside the Fiber (`sleep(1)`), the
-  # control is yielded to the outside code (main fiber), and *at the end of that
-  # execution*, the scheduler takes care of properly resuming all the blocked
-  # fibers.
-  #
-  # Note that the behavior described above is how the method is *expected* to
-  # behave, actual behavior is up to the current scheduler's implementation of
-  # Fiber::Scheduler#fiber method. Ruby doesn't enforce this method to behave in
-  # any particular way.
-  #
-  # If the scheduler is not set, the method raises `RuntimeError (No scheduler is
-  # available!)`.
-  #
-  def self.schedule: () { () -> void } -> Fiber
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.scheduler -> obj or nil
-  # -->
-  # Returns the Fiber scheduler, that was last set for the current thread with
-  # Fiber.set_scheduler. Returns `nil` if no scheduler is set (which is the
-  # default), and non-blocking fibers' behavior is the same as blocking. (see
-  # "Non-blocking fibers" section in class docs for details about the scheduler
-  # concept).
-  #
-  def self.scheduler: () -> untyped?
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.set_scheduler(scheduler) -> scheduler
-  # -->
-  # Sets the Fiber scheduler for the current thread. If the scheduler is set,
-  # non-blocking fibers (created by Fiber.new with `blocking: false`, or by
-  # Fiber.schedule) call that scheduler's hook methods on potentially blocking
-  # operations, and the current thread will call scheduler's `close` method on
-  # finalization (allowing the scheduler to properly manage all non-finished
-  # fibers).
-  #
-  # `scheduler` can be an object of any class corresponding to Fiber::Scheduler.
-  # Its implementation is up to the user.
-  #
-  # See also the "Non-blocking fibers" section in class docs.
-  #
-  def self.set_scheduler: (untyped) -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.yield(args, ...) -> obj
-  # -->
-  # Yields control back to the context that resumed the fiber, passing along any
-  # arguments that were passed to it. The fiber will resume processing at this
-  # point when #resume is called next. Any arguments passed to the next #resume
-  # will be the value that this Fiber.yield expression evaluates to.
-  #
-  def self.yield: (*untyped) -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - Fiber.new(blocking: false, storage: true) { |*args| ... } -> fiber
-  # -->
-  # Creates new Fiber. Initially, the fiber is not running and can be resumed with
-  # #resume. Arguments to the first #resume call will be passed to the block:
-  #
-  #     f = Fiber.new do |initial|
-  #        current = initial
-  #        loop do
-  #          puts "current: #{current.inspect}"
-  #          current = Fiber.yield
-  #        end
-  #     end
-  #     f.resume(100)     # prints: current: 100
-  #     f.resume(1, 2, 3) # prints: current: [1, 2, 3]
-  #     f.resume          # prints: current: nil
-  #     # ... and so on ...
-  #
-  # If `blocking: false` is passed to `Fiber.new`, *and* current thread has a
-  # Fiber.scheduler defined, the Fiber becomes non-blocking (see "Non-blocking
-  # Fibers" section in class docs).
-  #
-  # If the `storage` is unspecified, the default is to inherit a copy of the
-  # storage from the current fiber. This is the same as specifying `storage:
-  # true`.
-  #
-  #     Fiber[:x] = 1
-  #     Fiber.new do
-  #       Fiber[:x] # => 1
-  #       Fiber[:x] = 2
-  #     end.resume
-  #     Fiber[:x] # => 1
-  #
-  # If the given `storage` is `nil`, this function will lazy initialize the
-  # internal storage, which starts as an empty hash.
-  #
-  #     Fiber[:x] = "Hello World"
-  #     Fiber.new(storage: nil) do
-  #       Fiber[:x] # nil
-  #     end
-  #
-  # Otherwise, the given `storage` is used as the new fiber's storage, and it must
-  # be an instance of Hash.
-  #
-  # Explicitly using `storage: true` is currently experimental and may change in
-  # the future.
-  #
-  def initialize: (?blocking: boolish, ?storage: true | Hash[interned, untyped] | nil) { (?) -> void } -> void
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.alive? -> true or false
-  # -->
-  # Returns true if the fiber can still be resumed (or transferred to). After
-  # finishing execution of the fiber block this method will always return `false`.
-  #
-  def alive?: () -> bool
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.backtrace -> array
-  #   - fiber.backtrace(start) -> array
-  #   - fiber.backtrace(start, count) -> array
-  #   - fiber.backtrace(start..end) -> array
-  # -->
-  # Returns the current execution stack of the fiber. `start`, `count` and `end`
-  # allow to select only parts of the backtrace.
-  #
-  #     def level3
-  #       Fiber.yield
-  #     end
-  #
-  #     def level2
-  #       level3
-  #     end
-  #
-  #     def level1
-  #       level2
-  #     end
-  #
-  #     f = Fiber.new { level1 }
-  #
-  #     # It is empty before the fiber started
-  #     f.backtrace
-  #     #=> []
-  #
-  #     f.resume
-  #
-  #     f.backtrace
-  #     #=> ["test.rb:2:in `yield'", "test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
-  #     p f.backtrace(1) # start from the item 1
-  #     #=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'", "test.rb:13:in `block in <main>'"]
-  #     p f.backtrace(2, 2) # start from item 2, take 2
-  #     #=> ["test.rb:6:in `level2'", "test.rb:10:in `level1'"]
-  #     p f.backtrace(1..3) # take items from 1 to 3
-  #     #=> ["test.rb:2:in `level3'", "test.rb:6:in `level2'", "test.rb:10:in `level1'"]
-  #
-  #     f.resume
-  #
-  #     # It is nil after the fiber is finished
-  #     f.backtrace
-  #     #=> nil
-  #
-  def backtrace: (?Integer start, ?Integer count) -> Array[String]?
-               | (Range[Integer]) -> Array[String]?
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.backtrace_locations -> array
-  #   - fiber.backtrace_locations(start) -> array
-  #   - fiber.backtrace_locations(start, count) -> array
-  #   - fiber.backtrace_locations(start..end) -> array
-  # -->
-  # Like #backtrace, but returns each line of the execution stack as a
-  # Thread::Backtrace::Location. Accepts the same arguments as #backtrace.
-  #
-  #     f = Fiber.new { Fiber.yield }
-  #     f.resume
-  #     loc = f.backtrace_locations.first
-  #     loc.label  #=> "yield"
-  #     loc.path   #=> "test.rb"
-  #     loc.lineno #=> 1
-  #
-  def backtrace_locations: (?Integer start, ?Integer count) -> Array[Thread::Backtrace::Location]?
-                         | (Range[Integer]) -> Array[Thread::Backtrace::Location]?
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.blocking? -> true or false
-  # -->
-  # Returns `true` if `fiber` is blocking and `false` otherwise. Fiber is
-  # non-blocking if it was created via passing `blocking: false` to Fiber.new, or
-  # via Fiber.schedule.
-  #
-  # Note that, even if the method returns `false`, the fiber behaves differently
-  # only if Fiber.scheduler is set in the current thread.
-  #
-  # See the "Non-blocking fibers" section in class docs for details.
-  #
-  def blocking?: () -> bool
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - inspect()
-  # -->
-  #
-  alias inspect to_s
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.kill -> nil
-  # -->
-  # Terminates the fiber by raising an uncatchable exception. It only terminates
-  # the given fiber and no other fiber, returning `nil` to another fiber if that
-  # fiber was calling #resume or #transfer.
-  #
-  # `Fiber#kill` only interrupts another fiber when it is in Fiber.yield. If
-  # called on the current fiber then it raises that exception at the `Fiber#kill`
-  # call site.
-  #
-  # If the fiber has not been started, transition directly to the terminated
-  # state.
-  #
-  # If the fiber is already terminated, does nothing.
-  #
-  # Raises FiberError if called on a fiber belonging to another thread.
-  #
-  def kill: () -> nil
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.raise                                 -> obj
-  #   - fiber.raise(string)                         -> obj
-  #   - fiber.raise(exception [, string [, array]]) -> obj
-  # -->
-  # Raises an exception in the fiber at the point at which the last `Fiber.yield`
-  # was called. If the fiber has not been started or has already run to
-  # completion, raises `FiberError`. If the fiber is yielding, it is resumed. If
-  # it is transferring, it is transferred into. But if it is resuming, raises
-  # `FiberError`.
-  #
-  # With no arguments, raises a `RuntimeError`. With a single `String` argument,
-  # raises a `RuntimeError` with the string as a message.  Otherwise, the first
-  # parameter should be the name of an `Exception` class (or an object that
-  # returns an `Exception` object when sent an `exception` message). The optional
-  # second parameter sets the message associated with the exception, and the third
-  # parameter is an array of callback information. Exceptions are caught by the
-  # `rescue` clause of `begin...end` blocks.
-  #
-  # Raises `FiberError` if called on a Fiber belonging to another `Thread`.
-  #
-  # See Kernel#raise for more information.
-  #
-  def raise: (?string msg) -> untyped
-           | (_Exception, ?string msg, ?Array[string] | Array[Thread::Backtrace::Location] | nil backtrace) -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.resume(args, ...) -> obj
-  # -->
-  # Resumes the fiber from the point at which the last Fiber.yield was called, or
-  # starts running it if it is the first call to #resume. Arguments passed to
-  # resume will be the value of the Fiber.yield expression or will be passed as
-  # block parameters to the fiber's block if this is the first #resume.
-  #
-  # Alternatively, when resume is called it evaluates to the arguments passed to
-  # the next Fiber.yield statement inside the fiber's block or to the block value
-  # if it runs to completion without any Fiber.yield
-  #
-  def resume: (*untyped) -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.storage -> hash (dup)
-  # -->
-  # Returns a copy of the storage hash for the fiber. The method can only be
-  # called on the Fiber.current.
-  #
-  def storage: () -> Hash[interned, untyped]
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.storage = hash
-  # -->
-  # Sets the storage hash for the fiber. This feature is experimental and may
-  # change in the future. The method can only be called on the Fiber.current.
-  #
-  # You should be careful about using this method as you may inadvertently clear
-  # important fiber-storage state. You should mostly prefer to assign specific
-  # keys in the storage using Fiber::[]=.
-  #
-  # You can also use `Fiber.new(storage: nil)` to create a fiber with an empty
-  # storage.
-  #
-  # Example:
-  #
-  #     while request = request_queue.pop
-  #       # Reset the per-request state:
-  #       Fiber.current.storage = nil
-  #       handle_request(request)
-  #     end
-  #
-  def storage=: (Hash[interned, untyped]) -> Hash[interned, untyped]
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - to_s()
-  # -->
-  #
-  def to_s: () -> untyped
-
-  # <!--
-  #   rdoc-file=cont.c
-  #   - fiber.transfer(args, ...) -> obj
-  # -->
-  # Transfer control to another fiber, resuming it from where it last stopped or
-  # starting it if it was not resumed before. The calling fiber will be suspended
-  # much like in a call to Fiber.yield.
-  #
-  # The fiber which receives the transfer call treats it much like a resume call.
-  # Arguments passed to transfer are treated like those passed to resume.
-  #
-  # The two style of control passing to and from fiber (one is #resume and
-  # Fiber::yield, another is #transfer to and from fiber) can't be freely mixed.
-  #
-  # *   If the Fiber's lifecycle had started with transfer, it will never be able
-  #     to yield or be resumed control passing, only finish or transfer back. (It
-  #     still can resume other fibers that are allowed to be resumed.)
-  # *   If the Fiber's lifecycle had started with resume, it can yield or transfer
-  #     to another Fiber, but can receive control back only the way compatible
-  #     with the way it was given away: if it had transferred, it only can be
-  #     transferred back, and if it had yielded, it only can be resumed back.
-  #     After that, it again can transfer or yield.
-  #
-  # If those rules are broken FiberError is raised.
-  #
-  # For an individual Fiber design, yield/resume is easier to use (the Fiber just
-  # gives away control, it doesn't need to think about who the control is given
-  # to), while transfer is more flexible for complex cases, allowing to build
-  # arbitrary graphs of Fibers dependent on each other.
-  #
-  # Example:
-  #
-  #     manager = nil # For local var to be visible inside worker block
-  #
-  #     # This fiber would be started with transfer
-  #     # It can't yield, and can't be resumed
-  #     worker = Fiber.new { |work|
-  #       puts "Worker: starts"
-  #       puts "Worker: Performed #{work.inspect}, transferring back"
-  #       # Fiber.yield     # this would raise FiberError: attempt to yield on a not resumed fiber
-  #       # manager.resume  # this would raise FiberError: attempt to resume a resumed fiber (double resume)
-  #       manager.transfer(work.capitalize)
-  #     }
-  #
-  #     # This fiber would be started with resume
-  #     # It can yield or transfer, and can be transferred
-  #     # back or resumed
-  #     manager = Fiber.new {
-  #       puts "Manager: starts"
-  #       puts "Manager: transferring 'something' to worker"
-  #       result = worker.transfer('something')
-  #       puts "Manager: worker returned #{result.inspect}"
-  #       # worker.resume    # this would raise FiberError: attempt to resume a transferring fiber
-  #       Fiber.yield        # this is OK, the fiber transferred from and to, now it can yield
-  #       puts "Manager: finished"
-  #     }
-  #
-  #     puts "Starting the manager"
-  #     manager.resume
-  #     puts "Resuming the manager"
-  #     # manager.transfer  # this would raise FiberError: attempt to transfer to a yielding fiber
-  #     manager.resume
-  #
-  # *produces*
-  #
-  #     Starting the manager
-  #     Manager: starts
-  #     Manager: transferring 'something' to worker
-  #     Worker: starts
-  #     Worker: Performed "something", transferring back
-  #     Manager: worker returned "Something"
-  #     Resuming the manager
-  #     Manager: finished
-  #
-  def transfer: (*untyped) -> untyped
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/core/fiber_error.rbs

@@ -1,11 +0,0 @@
-# <!-- rdoc-file=cont.c -->
-# Raised when an invalid operation is attempted on a Fiber, in particular when
-# attempting to call/resume a dead fiber, attempting to yield from the root
-# fiber, or calling a fiber across threads.
-#
-#     fiber = Fiber.new{}
-#     fiber.resume #=> nil
-#     fiber.resume #=> FiberError: dead fiber called
-#
-class FiberError < StandardError
-end