@ai-ecoverse/wasix-ruby 3.4.11-2 → 3.4.11-20

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/zlib.rbs

@@ -1,449 +0,0 @@
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# This module provides access to the [zlib library](http://zlib.net). Zlib is
-# designed to be a portable, free, general-purpose, legally unencumbered -- that
-# is, not covered by any patents -- lossless data-compression library for use on
-# virtually any computer hardware and operating system.
-#
-# The zlib compression library provides in-memory compression and decompression
-# functions, including integrity checks of the uncompressed data.
-#
-# The zlib compressed data format is described in RFC 1950, which is a wrapper
-# around a deflate stream which is described in RFC 1951.
-#
-# The library also supports reading and writing files in gzip (.gz) format with
-# an interface similar to that of IO. The gzip format is described in RFC 1952
-# which is also a wrapper around a deflate stream.
-#
-# The zlib format was designed to be compact and fast for use in memory and on
-# communications channels. The gzip format was designed for single-file
-# compression on file systems, has a larger header than zlib to maintain
-# directory information, and uses a different, slower check method than zlib.
-#
-# See your system's zlib.h for further information about zlib
-#
-# ## Sample usage
-#
-# Using the wrapper to compress strings with default parameters is quite simple:
-#
-#     require "zlib"
-#
-#     data_to_compress = File.read("don_quixote.txt")
-#
-#     puts "Input size: #{data_to_compress.size}"
-#     #=> Input size: 2347740
-#
-#     data_compressed = Zlib::Deflate.deflate(data_to_compress)
-#
-#     puts "Compressed size: #{data_compressed.size}"
-#     #=> Compressed size: 887238
-#
-#     uncompressed_data = Zlib::Inflate.inflate(data_compressed)
-#
-#     puts "Uncompressed data is: #{uncompressed_data}"
-#     #=> Uncompressed data is: The Project Gutenberg EBook of Don Quixote...
-#
-# ## Class tree
-#
-# *   Zlib::Deflate
-# *   Zlib::Inflate
-# *   Zlib::ZStream
-# *   Zlib::Error
-#     *   Zlib::StreamEnd
-#     *   Zlib::NeedDict
-#     *   Zlib::DataError
-#     *   Zlib::StreamError
-#     *   Zlib::MemError
-#     *   Zlib::BufError
-#     *   Zlib::VersionError
-#     *   Zlib::InProgressError
-#
-# (if you have GZIP_SUPPORT)
-# *   Zlib::GzipReader
-# *   Zlib::GzipWriter
-# *   Zlib::GzipFile
-# *   Zlib::GzipFile::Error
-#     *   Zlib::GzipFile::LengthError
-#     *   Zlib::GzipFile::CRCError
-#     *   Zlib::GzipFile::NoFooter
-#
-module Zlib
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.adler32(string, adler)
-  # -->
-  # Calculates Adler-32 checksum for `string`, and returns updated value of
-  # `adler`. If `string` is omitted, it returns the Adler-32 initial value. If
-  # `adler` is omitted, it assumes that the initial value is given to `adler`. If
-  # `string` is an IO instance, reads from the IO until the IO returns nil and
-  # returns Adler-32 of all read data.
-  #
-  # Example usage:
-  #
-  #     require "zlib"
-  #
-  #     data = "foo"
-  #     puts "Adler32 checksum: #{Zlib.adler32(data).to_s(16)}"
-  #     #=> Adler32 checksum: 2820145
-  #
-  def self.adler32: () -> Integer
-                  | (String) -> Integer
-                  | (String, Integer) -> Integer
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.adler32_combine(adler1, adler2, len2)
-  # -->
-  # Combine two Adler-32 check values in to one.  `adler1` is the first Adler-32
-  # value, `adler2` is the second Adler-32 value.  `len2` is the length of the
-  # string used to generate `adler2`.
-  #
-  def self.adler32_combine: (Integer, Integer, Integer) -> Integer
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.crc32(string, crc)
-  # -->
-  # Calculates CRC checksum for `string`, and returns updated value of `crc`. If
-  # `string` is omitted, it returns the CRC initial value. If `crc` is omitted, it
-  # assumes that the initial value is given to `crc`. If `string` is an IO
-  # instance, reads from the IO until the IO returns nil and returns CRC checksum
-  # of all read data.
-  #
-  # FIXME: expression.
-  #
-  def self.crc32: () -> Integer
-                | (String) -> Integer
-                | (String, Integer) -> Integer
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.crc32_combine(crc1, crc2, len2)
-  # -->
-  # Combine two CRC-32 check values in to one.  `crc1` is the first CRC-32 value,
-  # `crc2` is the second CRC-32 value.  `len2` is the length of the string used to
-  # generate `crc2`.
-  #
-  def self.crc32_combine: (Integer, Integer, Integer) -> Integer
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - crc_table()
-  # -->
-  # Returns the table for calculating CRC checksum as an array.
-  #
-  def self.crc_table: () -> Array[Integer]
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.deflate(string[, level])
-  #   - Zlib::Deflate.deflate(string[, level])
-  # -->
-  # Compresses the given `string`. Valid values of level are Zlib::NO_COMPRESSION,
-  # Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION, or an
-  # integer from 0 to 9.
-  #
-  # This method is almost equivalent to the following code:
-  #
-  #     def deflate(string, level)
-  #       z = Zlib::Deflate.new(level)
-  #       dst = z.deflate(string, Zlib::FINISH)
-  #       z.close
-  #       dst
-  #     end
-  #
-  # See also Zlib.inflate
-  #
-  def self.deflate: (String) -> String
-                  | (String, Integer) -> String
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.gunzip(src) -> String
-  # -->
-  # Decode the given gzipped `string`.
-  #
-  # This method is almost equivalent to the following code:
-  #
-  #     def gunzip(string)
-  #       sio = StringIO.new(string)
-  #       gz = Zlib::GzipReader.new(sio, encoding: Encoding::ASCII_8BIT)
-  #       gz.read
-  #     ensure
-  #       gz&.close
-  #     end
-  #
-  # See also Zlib.gzip
-  #
-  def self.gunzip: (String) -> String
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.gzip(src, level: nil, strategy: nil) -> String
-  # -->
-  # Gzip the given `string`. Valid values of level are Zlib::NO_COMPRESSION,
-  # Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION (default),
-  # or an integer from 0 to 9.
-  #
-  # This method is almost equivalent to the following code:
-  #
-  #     def gzip(string, level: nil, strategy: nil)
-  #       sio = StringIO.new
-  #       sio.binmode
-  #       gz = Zlib::GzipWriter.new(sio, level, strategy)
-  #       gz.write(string)
-  #       gz.close
-  #       sio.string
-  #     end
-  #
-  # See also Zlib.gunzip
-  #
-  def self.gzip: (String) -> String
-               | (String, level: Integer) -> String
-               | (String, strategy: Integer) -> String
-               | (String, level: Integer, strategy: Integer) -> String
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - Zlib.inflate(string)
-  #   - Zlib::Inflate.inflate(string)
-  # -->
-  # Decompresses `string`. Raises a Zlib::NeedDict exception if a preset
-  # dictionary is needed for decompression.
-  #
-  # This method is almost equivalent to the following code:
-  #
-  #     def inflate(string)
-  #       zstream = Zlib::Inflate.new
-  #       buf = zstream.inflate(string)
-  #       zstream.finish
-  #       zstream.close
-  #       buf
-  #     end
-  #
-  # See also Zlib.deflate
-  #
-  def self.inflate: (String) -> String
-
-  # <!--
-  #   rdoc-file=ext/zlib/zlib.c
-  #   - zlib_version()
-  # -->
-  # Returns the string which represents the version of zlib library.
-  #
-  def self.zlib_version: () -> String
-end
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Represents text data as guessed by deflate.
-#
-# NOTE: The underlying constant Z_ASCII was deprecated in favor of Z_TEXT in
-# zlib 1.2.2.  New applications should not use this constant.
-#
-# See Zlib::Deflate#data_type.
-#
-Zlib::ASCII: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Slowest compression level, but with the best space savings.
-#
-Zlib::BEST_COMPRESSION: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Fastest compression level, but with the lowest space savings.
-#
-Zlib::BEST_SPEED: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Represents binary data as guessed by deflate.
-#
-# See Zlib::Deflate#data_type.
-#
-Zlib::BINARY: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Default compression level which is a good trade-off between space and time
-#
-Zlib::DEFAULT_COMPRESSION: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Default deflate strategy which is used for normal data.
-#
-Zlib::DEFAULT_STRATEGY: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The default memory level for allocating zlib deflate compression state.
-#
-Zlib::DEF_MEM_LEVEL: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Deflate strategy for data produced by a filter (or predictor). The effect of
-# FILTERED is to force more Huffman codes and less string matching; it is
-# somewhat intermediate between DEFAULT_STRATEGY and HUFFMAN_ONLY. Filtered data
-# consists mostly of small values with a somewhat random distribution.
-#
-Zlib::FILTERED: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Processes all pending input and flushes pending output.
-#
-Zlib::FINISH: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Deflate strategy which prevents the use of dynamic Huffman codes, allowing for
-# a simpler decoder for specialized applications.
-#
-Zlib::FIXED: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Flushes all output as with SYNC_FLUSH, and the compression state is reset so
-# that decompression can restart from this point if previous compressed data has
-# been damaged or if random access is desired. Like SYNC_FLUSH, using FULL_FLUSH
-# too often can seriously degrade compression.
-#
-Zlib::FULL_FLUSH: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Deflate strategy which uses Huffman codes only (no string matching).
-#
-Zlib::HUFFMAN_ONLY: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The maximum memory level for allocating zlib deflate compression state.
-#
-Zlib::MAX_MEM_LEVEL: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The maximum size of the zlib history buffer.  Note that zlib allows larger
-# values to enable different inflate modes.  See Zlib::Inflate.new for details.
-#
-Zlib::MAX_WBITS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# No compression, passes through data untouched.  Use this for appending
-# pre-compressed data to a deflate stream.
-#
-Zlib::NO_COMPRESSION: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# NO_FLUSH is the default flush method and allows deflate to decide how much
-# data to accumulate before producing output in order to maximize compression.
-#
-Zlib::NO_FLUSH: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for Amiga hosts
-#
-Zlib::OS_AMIGA: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for Atari hosts
-#
-Zlib::OS_ATARI: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The OS code of current host
-#
-Zlib::OS_CODE: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for CP/M hosts
-#
-Zlib::OS_CPM: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for Mac OS hosts
-#
-Zlib::OS_MACOS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for MSDOS hosts
-#
-Zlib::OS_MSDOS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for OS2 hosts
-#
-Zlib::OS_OS2: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for QDOS hosts
-#
-Zlib::OS_QDOS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for RISC OS hosts
-#
-Zlib::OS_RISCOS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for TOPS-20 hosts
-#
-Zlib::OS_TOPS20: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for UNIX hosts
-#
-Zlib::OS_UNIX: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for unknown hosts
-#
-Zlib::OS_UNKNOWN: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for VM OS hosts
-#
-Zlib::OS_VMCMS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for VMS hosts
-#
-Zlib::OS_VMS: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for Win32 hosts
-#
-Zlib::OS_WIN32: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# OS code for Z-System hosts
-#
-Zlib::OS_ZSYSTEM: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Deflate compression strategy designed to be almost as fast as HUFFMAN_ONLY,
-# but give better compression for PNG image data.
-#
-Zlib::RLE: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The SYNC_FLUSH method flushes all pending output to the output buffer and the
-# output is aligned on a byte boundary. Flushing may degrade compression so it
-# should be used only when necessary, such as at a request or response boundary
-# for a network stream.
-#
-Zlib::SYNC_FLUSH: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Represents text data as guessed by deflate.
-#
-# See Zlib::Deflate#data_type.
-#
-Zlib::TEXT: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# Represents an unknown data type as guessed by deflate.
-#
-# See Zlib::Deflate#data_type.
-#
-Zlib::UNKNOWN: Integer
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The Ruby/zlib version string.
-#
-Zlib::VERSION: String
-
-# <!-- rdoc-file=ext/zlib/zlib.c -->
-# The string which represents the version of zlib.h
-#
-Zlib::ZLIB_VERSION: String

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/zstream.rbs

@@ -1,200 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  # <!-- rdoc-file=ext/zlib/zlib.c -->
-  # Zlib::ZStream is the abstract class for the stream which handles the
-  # compressed data. The operations are defined in the subclasses: Zlib::Deflate
-  # for compression, and Zlib::Inflate for decompression.
-  #
-  # An instance of Zlib::ZStream has one stream (struct zstream in the source) and
-  # two variable-length buffers which associated to the input (next_in) of the
-  # stream and the output (next_out) of the stream. In this document, "input
-  # buffer" means the buffer for input, and "output buffer" means the buffer for
-  # output.
-  #
-  # Data input into an instance of Zlib::ZStream are temporally stored into the
-  # end of input buffer, and then data in input buffer are processed from the
-  # beginning of the buffer until no more output from the stream is produced (i.e.
-  # until avail_out > 0 after processing).  During processing, output buffer is
-  # allocated and expanded automatically to hold all output data.
-  #
-  # Some particular instance methods consume the data in output buffer and return
-  # them as a String.
-  #
-  # Here is an ascii art for describing above:
-  #
-  #     +================ an instance of Zlib::ZStream ================+
-  #     ||                                                            ||
-  #     ||     +--------+          +-------+          +--------+      ||
-  #     ||  +--| output |<---------|zstream|<---------| input  |<--+  ||
-  #     ||  |  | buffer |  next_out+-------+next_in   | buffer |   |  ||
-  #     ||  |  +--------+                             +--------+   |  ||
-  #     ||  |                                                      |  ||
-  #     +===|======================================================|===+
-  #         |                                                      |
-  #         v                                                      |
-  #     "output data"                                         "input data"
-  #
-  # If an error occurs during processing input buffer, an exception which is a
-  # subclass of Zlib::Error is raised.  At that time, both input and output buffer
-  # keep their conditions at the time when the error occurs.
-  #
-  # ## Method Catalogue
-  #
-  # Many of the methods in this class are fairly low-level and unlikely to be of
-  # interest to users.  In fact, users are unlikely to use this class directly;
-  # rather they will be interested in Zlib::Inflate and Zlib::Deflate.
-  #
-  # The higher level methods are listed below.
-  #
-  # *   #total_in
-  # *   #total_out
-  # *   #data_type
-  # *   #adler
-  # *   #reset
-  # *   #finish
-  # *   #finished?
-  # *   #close
-  # *   #closed?
-  #
-  class ZStream
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - adler()
-    # -->
-    # Returns the adler-32 checksum.
-    #
-    def adler: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - avail_in()
-    # -->
-    # Returns bytes of data in the input buffer. Normally, returns 0.
-    #
-    def avail_in: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - avail_out()
-    # -->
-    # Returns number of bytes of free spaces in output buffer.  Because the free
-    # space is allocated automatically, this method returns 0 normally.
-    #
-    def avail_out: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - avail_out=(p1)
-    # -->
-    # Allocates `size` bytes of free space in the output buffer. If there are more
-    # than `size` bytes already in the buffer, the buffer is truncated. Because free
-    # space is allocated automatically, you usually don't need to use this method.
-    #
-    def avail_out=: (Integer p1) -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - close()
-    # -->
-    # Closes the stream. All operations on the closed stream will raise an
-    # exception.
-    #
-    def close: () -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - closed?()
-    # -->
-    # Returns true if the stream is closed.
-    #
-    def closed?: () -> bool
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - data_type()
-    # -->
-    # Guesses the type of the data which have been inputted into the stream. The
-    # returned value is either `BINARY`, `ASCII`, or `UNKNOWN`.
-    #
-    def data_type: () -> String
-
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Closes the stream. All operations on the closed stream will raise an
-    # exception.
-    #
-    def end: () -> void
-
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Returns true if the stream is closed.
-    #
-    def ended?: () -> bool
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - finish                 -> String
-    #   - finish { |chunk| ... } -> nil
-    # -->
-    # Finishes the stream and flushes output buffer.  If a block is given each chunk
-    # is yielded to the block until the input buffer has been flushed to the output
-    # buffer.
-    #
-    def finish: () -> String
-              | () { (String chunk) -> void } -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - finished?()
-    # -->
-    # Returns true if the stream is finished.
-    #
-    def finished?: () -> bool
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - flush_next_in -> input
-    # -->
-    #
-    def flush_next_in: () -> String
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - flush_next_out                 -> String
-    #   - flush_next_out { |chunk| ... } -> nil
-    # -->
-    # Flushes output buffer and returns all data in that buffer.  If a block is
-    # given each chunk is yielded to the block until the current output buffer has
-    # been flushed.
-    #
-    def flush_next_out: () -> String?
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - reset()
-    # -->
-    # Resets and initializes the stream. All data in both input and output buffer
-    # are discarded.
-    #
-    def reset: () -> void
-
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Returns true if the stream is finished.
-    #
-    def stream_end?: () -> bool
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - total_in()
-    # -->
-    # Returns the total bytes of the input data to the stream.  FIXME
-    #
-    def total_in: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - total_out()
-    # -->
-    # Returns the total bytes of the output data from the stream.  FIXME
-    #
-    def total_out: () -> Integer
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/templates/include/rbs/constants.h.erb

@@ -1,20 +0,0 @@
-#ifndef RBS__CONSTANTS_H
-#define RBS__CONSTANTS_H
-
-extern VALUE RBS;
-
-extern VALUE RBS_AST;
-extern VALUE RBS_AST_Declarations;
-extern VALUE RBS_AST_Directives;
-extern VALUE RBS_AST_Members;
-extern VALUE RBS_Types;
-extern VALUE RBS_Types_Bases;
-extern VALUE RBS_ParsingError;
-
-<%- nodes.each do |node| -%>
-extern VALUE <%= node.c_constant_name %>;
-<%- end -%>
-
-void rbs__init_constants();
-
-#endif

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/templates/include/rbs/ruby_objs.h.erb

@@ -1,10 +0,0 @@
-#ifndef RBS__RUBY_OBJS_H
-#define RBS__RUBY_OBJS_H
-
-#include "ruby.h"
-
-<%- nodes.each do |node| -%>
-VALUE <%= node.c_function_name %>(<%= node.fields.map { |field| "#{field.c_type} #{field.name}" }.join(", ") %>);
-<%- end -%>
-
-#endif