@ai-ecoverse/wasix-ruby 3.4.11-2 → 3.4.11-20

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/data_error.rbs

@@ -1,10 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  # <!-- rdoc-file=ext/zlib/zlib.c -->
-  # Subclass of Zlib::Error when zlib returns a Z_DATA_ERROR.
-  #
-  # Usually if a stream was prematurely freed.
-  #
-  class DataError < Zlib::Error
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/deflate.rbs

@@ -1,210 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  # <!-- rdoc-file=ext/zlib/zlib.c -->
-  # Zlib::Deflate is the class for compressing data.  See Zlib::ZStream for more
-  # information.
-  #
-  class Deflate < Zlib::ZStream
-    type compression_level = Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - Zlib.deflate(string[, level])
-    #   - Zlib::Deflate.deflate(string[, level])
-    # -->
-    # Compresses the given `string`. Valid values of level are Zlib::NO_COMPRESSION,
-    # Zlib::BEST_SPEED, Zlib::BEST_COMPRESSION, Zlib::DEFAULT_COMPRESSION, or an
-    # integer from 0 to 9.
-    #
-    # This method is almost equivalent to the following code:
-    #
-    #     def deflate(string, level)
-    #       z = Zlib::Deflate.new(level)
-    #       dst = z.deflate(string, Zlib::FINISH)
-    #       z.close
-    #       dst
-    #     end
-    #
-    # See also Zlib.inflate
-    #
-    def self.deflate: (string string, ?compression_level level) -> String
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - << string
-    # -->
-    # Inputs `string` into the deflate stream just like Zlib::Deflate#deflate, but
-    # returns the Zlib::Deflate object itself.  The output from the stream is
-    # preserved in output buffer.
-    #
-    def <<: (string string) -> self
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - z.deflate(string, flush = Zlib::NO_FLUSH)                 -> String
-    #   - z.deflate(string, flush = Zlib::NO_FLUSH) { |chunk| ... } -> nil
-    # -->
-    # Inputs `string` into the deflate stream and returns the output from the
-    # stream.  On calling this method, both the input and the output buffers of the
-    # stream are flushed.  If `string` is nil, this method finishes the stream, just
-    # like Zlib::ZStream#finish.
-    #
-    # If a block is given consecutive deflated chunks from the `string` are yielded
-    # to the block and `nil` is returned.
-    #
-    # The `flush` parameter specifies the flush mode.  The following constants may
-    # be used:
-    #
-    # Zlib::NO_FLUSH
-    # :   The default
-    #
-    # Zlib::SYNC_FLUSH
-    # :   Flushes the output to a byte boundary
-    #
-    # Zlib::FULL_FLUSH
-    # :   SYNC_FLUSH + resets the compression state
-    #
-    # Zlib::FINISH
-    # :   Pending input is processed, pending output is flushed.
-    #
-    #
-    # See the constants for further description.
-    #
-    def deflate: (string string, ?Integer flush) -> String
-               | (string string, ?Integer flush) { (String chunk) -> nil } -> nil
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - flush(flush = Zlib::SYNC_FLUSH)                 -> String
-    #   - flush(flush = Zlib::SYNC_FLUSH) { |chunk| ... } -> nil
-    # -->
-    # This method is equivalent to `deflate('', flush)`. This method is just
-    # provided to improve the readability of your Ruby program.  If a block is given
-    # chunks of deflate output are yielded to the block until the buffer is flushed.
-    #
-    # See Zlib::Deflate#deflate for detail on the `flush` constants NO_FLUSH,
-    # SYNC_FLUSH, FULL_FLUSH and FINISH.
-    #
-    def flush: (?Integer flush) -> String
-             | (?Integer flush) { (String chunk) -> nil } -> nil
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - params(level, strategy)
-    # -->
-    # Changes the parameters of the deflate stream to allow changes between
-    # different types of data that require different types of compression.  Any
-    # unprocessed data is flushed before changing the params.
-    #
-    # See Zlib::Deflate.new for a description of `level` and `strategy`.
-    #
-    def params: (compression_level level, Integer strategy) -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - set_dictionary(string)
-    # -->
-    # Sets the preset dictionary and returns `string`. This method is available just
-    # only after Zlib::Deflate.new or Zlib::ZStream#reset method was called. See
-    # zlib.h for details.
-    #
-    # Can raise errors of Z_STREAM_ERROR if a parameter is invalid (such as NULL
-    # dictionary) or the stream state is inconsistent, Z_DATA_ERROR if the given
-    # dictionary doesn't match the expected one (incorrect adler32 value)
-    #
-    def set_dictionary: (String dictionary) -> String
-
-    private
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - Zlib::Deflate.new(level=DEFAULT_COMPRESSION, window_bits=MAX_WBITS, mem_level=DEF_MEM_LEVEL, strategy=DEFAULT_STRATEGY)
-    # -->
-    # Creates a new deflate stream for compression. If a given argument is nil, the
-    # default value of that argument is used.
-    #
-    # The `level` sets the compression level for the deflate stream between 0 (no
-    # compression) and 9 (best compression). The following constants have been
-    # defined to make code more readable:
-    #
-    # *   Zlib::DEFAULT_COMPRESSION
-    # *   Zlib::NO_COMPRESSION
-    # *   Zlib::BEST_SPEED
-    # *   Zlib::BEST_COMPRESSION
-    #
-    # See http://www.zlib.net/manual.html#Constants for further information.
-    #
-    # The `window_bits` sets the size of the history buffer and should be between 8
-    # and 15.  Larger values of this parameter result in better compression at the
-    # expense of memory usage.
-    #
-    # The `mem_level` specifies how much memory should be allocated for the internal
-    # compression state.  1 uses minimum memory but is slow and reduces compression
-    # ratio while 9 uses maximum memory for optimal speed.  The default value is 8.
-    # Two constants are defined:
-    #
-    # *   Zlib::DEF_MEM_LEVEL
-    # *   Zlib::MAX_MEM_LEVEL
-    #
-    # The `strategy` sets the deflate compression strategy.  The following
-    # strategies are available:
-    #
-    # Zlib::DEFAULT_STRATEGY
-    # :   For normal data
-    #
-    # Zlib::FILTERED
-    # :   For data produced by a filter or predictor
-    #
-    # Zlib::FIXED
-    # :   Prevents dynamic Huffman codes
-    #
-    # Zlib::HUFFMAN_ONLY
-    # :   Prevents string matching
-    #
-    # Zlib::RLE
-    # :   Designed for better compression of PNG image data
-    #
-    #
-    # See the constants for further description.
-    #
-    # ## Examples
-    #
-    # ### Basic
-    #
-    #     open "compressed.file", "w+" do |io|
-    #       io << Zlib::Deflate.new.deflate(File.read("big.file"))
-    #     end
-    #
-    # ### Custom compression
-    #
-    #     open "compressed.file", "w+" do |compressed_io|
-    #       deflate = Zlib::Deflate.new(Zlib::BEST_COMPRESSION,
-    #                                   Zlib::MAX_WBITS,
-    #                                   Zlib::MAX_MEM_LEVEL,
-    #                                   Zlib::HUFFMAN_ONLY)
-    #
-    #       begin
-    #         open "big.file" do |big_io|
-    #           until big_io.eof? do
-    #             compressed_io << zd.deflate(big_io.read(16384))
-    #           end
-    #         end
-    #       ensure
-    #         deflate.close
-    #       end
-    #     end
-    #
-    # While this example will work, for best optimization review the flags for your
-    # specific time, memory usage and output space requirements.
-    #
-    def initialize: (?compression_level level, ?Integer window_bits, ?Integer mem_level, ?Integer strategy) -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - initialize_copy(p1)
-    # -->
-    # Duplicates the deflate stream.
-    #
-    def initialize_copy: (self other) -> self
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/error.rbs

@@ -1,20 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  # <!-- rdoc-file=ext/zlib/zlib.c -->
-  # The superclass for all exceptions raised by Ruby/zlib.
-  #
-  # The following exceptions are defined as subclasses of Zlib::Error. These
-  # exceptions are raised when zlib library functions return with an error status.
-  #
-  # *   Zlib::StreamEnd
-  # *   Zlib::NeedDict
-  # *   Zlib::DataError
-  # *   Zlib::StreamError
-  # *   Zlib::MemError
-  # *   Zlib::BufError
-  # *   Zlib::VersionError
-  # *   Zlib::InProgressError
-  #
-  class Error < StandardError
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/gzip_file/crc_error.rbs

@@ -1,12 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  %a{annotate:rdoc:skip}
-  class GzipFile
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Raised when the CRC checksum recorded in gzip file footer is not equivalent to
-    # the CRC checksum of the actual uncompressed data.
-    #
-    class CRCError < Zlib::GzipFile::Error
-    end
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/gzip_file/error.rbs

@@ -1,23 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  %a{annotate:rdoc:skip}
-  class GzipFile
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Base class of errors that occur when processing GZIP files.
-    #
-    class Error < Zlib::Error
-      # <!-- rdoc-file=ext/zlib/zlib.c -->
-      # input gzipped string
-      #
-      def input: () -> String
-
-      # <!--
-      #   rdoc-file=ext/zlib/zlib.c
-      #   - inspect()
-      # -->
-      # Constructs a String of the GzipFile Error
-      #
-      def inspect: () -> String
-    end
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/gzip_file/length_error.rbs

@@ -1,12 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  %a{annotate:rdoc:skip}
-  class GzipFile
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Raised when the data length recorded in the gzip file footer is not equivalent
-    # to the length of the actual uncompressed data.
-    #
-    class LengthError < Zlib::GzipFile::Error
-    end
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/gzip_file/no_footer.rbs

@@ -1,11 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  %a{annotate:rdoc:skip}
-  class GzipFile
-    # <!-- rdoc-file=ext/zlib/zlib.c -->
-    # Raised when gzip file footer is not found.
-    #
-    class NoFooter < Zlib::GzipFile::Error
-    end
-  end
-end

package/lib/ruby/gems/3.4.0/gems/rbs-3.8.0/stdlib/zlib/0/gzip_file.rbs

@@ -1,156 +0,0 @@
-%a{annotate:rdoc:skip}
-module Zlib
-  # <!-- rdoc-file=ext/zlib/zlib.c -->
-  # Zlib::GzipFile is an abstract class for handling a gzip formatted compressed
-  # file. The operations are defined in the subclasses, Zlib::GzipReader for
-  # reading, and Zlib::GzipWriter for writing.
-  #
-  # GzipReader should be used by associating an IO, or IO-like, object.
-  #
-  # ## Method Catalogue
-  #
-  # *   ::wrap
-  # *   ::open (Zlib::GzipReader::open and Zlib::GzipWriter::open)
-  # *   #close
-  # *   #closed?
-  # *   #comment
-  # *   comment= (Zlib::GzipWriter#comment=)
-  # *   #crc
-  # *   eof? (Zlib::GzipReader#eof?)
-  # *   #finish
-  # *   #level
-  # *   lineno (Zlib::GzipReader#lineno)
-  # *   lineno= (Zlib::GzipReader#lineno=)
-  # *   #mtime
-  # *   mtime= (Zlib::GzipWriter#mtime=)
-  # *   #orig_name
-  # *   orig_name (Zlib::GzipWriter#orig_name=)
-  # *   #os_code
-  # *   path (when the underlying IO supports #path)
-  # *   #sync
-  # *   #sync=
-  # *   #to_io
-  #
-  # (due to internal structure, documentation may appear under Zlib::GzipReader or
-  # Zlib::GzipWriter)
-  #
-  class GzipFile
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - Zlib::GzipReader.wrap(io, ...) { |gz| ... }
-    #   - Zlib::GzipWriter.wrap(io, ...) { |gz| ... }
-    # -->
-    # Creates a GzipReader or GzipWriter associated with `io`, passing in any
-    # necessary extra options, and executes the block with the newly created object
-    # just like File.open.
-    #
-    # The GzipFile object will be closed automatically after executing the block. If
-    # you want to keep the associated IO object open, you may call
-    # Zlib::GzipFile#finish method in the block.
-    #
-    def self.wrap: (IO io, *untyped) { (instance gz) -> void } -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - close()
-    # -->
-    # Closes the GzipFile object. This method calls close method of the associated
-    # IO object. Returns the associated IO object.
-    #
-    def close: () -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - closed?()
-    # -->
-    # Same as IO#closed?
-    #
-    def closed?: () -> void
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - comment()
-    # -->
-    # Returns comments recorded in the gzip file header, or nil if the comments is
-    # not present.
-    #
-    def comment: () -> String?
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - crc()
-    # -->
-    # Returns CRC value of the uncompressed data.
-    #
-    def crc: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - finish()
-    # -->
-    # Closes the GzipFile object. Unlike Zlib::GzipFile#close, this method never
-    # calls the close method of the associated IO object. Returns the associated IO
-    # object.
-    #
-    def finish: () -> IO
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - level()
-    # -->
-    # Returns compression level.
-    #
-    def level: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - mtime()
-    # -->
-    # Returns last modification time recorded in the gzip file header.
-    #
-    def mtime: () -> Time
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - orig_name()
-    # -->
-    # Returns original filename recorded in the gzip file header, or `nil` if
-    # original filename is not present.
-    #
-    def orig_name: () -> String?
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - os_code()
-    # -->
-    # Returns OS code number recorded in the gzip file header.
-    #
-    def os_code: () -> Integer
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - sync()
-    # -->
-    # Same as IO#sync
-    #
-    def sync: () -> bool
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - sync = flag
-    # -->
-    # Same as IO.  If flag is `true`, the associated IO object must respond to the
-    # `flush` method.  While `sync` mode is `true`, the compression ratio decreases
-    # sharply.
-    #
-    def sync=: (boolish) -> untyped
-
-    # <!--
-    #   rdoc-file=ext/zlib/zlib.c
-    #   - to_io()
-    # -->
-    # Same as IO.
-    #
-    def to_io: () -> IO
-  end
-end