@across-protocol/contracts 4.0.13 → 4.0.14-alpha.2

package/dist/target/types/multicall_handler.d.ts

@@ -5,7 +5,7 @@
  * IDL can be found at `target/idl/multicall_handler.json`.
  */
 export type MulticallHandler = {
-    "address": "Fk1RpqsfeWt8KnFCTW9NQVdVxYvxuqjGn6iPB9wrmM8h";
+    "address": "HaQe51FWtnmaEcuYEfPA7MRCXKrtqptat4oJdJ8zV5Be";
     "metadata": {
         "name": "multicallHandler";
         "version": "0.1.0";

package/dist/target/types/svm_spoke.d.ts

@@ -5,7 +5,7 @@
  * IDL can be found at `target/idl/svm_spoke.json`.
  */
 export type SvmSpoke = {
-    "address": "JAZWcGrpSWNPTBj8QtJ9UyQqhJCDhG9GJkDeMf5NQBiq";
+    "address": "DLv3NggMiSaef97YCkew5xKUHDh13tVGZ7tydt3ZeAru";
     "metadata": {
         "name": "svmSpoke";
         "version": "0.1.0";
@@ -751,6 +751,7 @@ export type SvmSpoke = {
                 "amount will be sent to the relayer on their repayment chain of choice as a refund following an optimistic",
                 "challenge window in the HubPool, less a system fee.",
                 "- output_amount: The amount of output tokens that the relayer will send to the recipient on the destination.",
+                "This is big-endian encoded as a 32-byte array to match its underlying byte representation on EVM side.",
                 "- destination_chain_id: The destination chain identifier where the fill should be made.",
                 "- exclusive_relayer: The relayer that will be exclusively allowed to fill this deposit before the exclusivity",
                 "deadline timestamp. This must be a valid, non-zero address if the exclusivity deadline is greater than the",
@@ -992,7 +993,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -1252,7 +1258,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -1978,7 +1989,10 @@ export type SvmSpoke = {
                 "- _root_bundle_id: Unique ID of root bundle containing slow relay root that this leaf is contained in.",
                 "- proof: Inclusion proof for this leaf in slow relay root in root bundle.",
                 "Note: slow_fill_leaf, _root_bundle_id, and proof are optional parameters. If None for any of these is passed,",
-                "the caller must load them via the instruction_params account."
+                "the caller must load them via the instruction_params account.",
+                "Note: When verifying the slow fill leaf, the relay data is hashed using AnchorSerialize::serialize that encodes",
+                "output token amounts to little-endian format while input token amount preserves its big-endian encoding as it",
+                "is passed as [u8; 32] array."
             ];
             "discriminator": [
                 26,
@@ -2344,6 +2358,7 @@ export type SvmSpoke = {
                 "token on the repayment chain will be sent as a refund to the caller.",
                 "- output_token: The token that the caller will send to the recipient on this chain.",
                 "- input_amount: This amount, less a system fee, will be sent to the caller on their repayment chain.",
+                "This is big-endian encoded as a 32-byte array to match its underlying byte representation on EVM side",
                 "- output_amount: The amount of output tokens that the caller will send to the recipient.",
                 "- origin_chain_id: The origin chain identifier.",
                 "- exclusive_relayer: The relayer that will be exclusively allowed to fill this deposit before the",
@@ -2723,38 +2738,38 @@ export type SvmSpoke = {
                             {
                                 "kind": "const";
                                 "value": [
-                                    255,
-                                    9,
-                                    170,
-                                    45,
-                                    62,
-                                    177,
-                                    188,
-                                    157,
-                                    161,
-                                    158,
+                                    183,
+                                    102,
+                                    64,
+                                    134,
+                                    222,
+                                    55,
+                                    238,
+                                    112,
                                     130,
-                                    38,
-                                    73,
-                                    48,
-                                    225,
-                                    61,
-                                    57,
-                                    147,
-                                    225,
+                                    28,
+                                    16,
+                                    68,
+                                    91,
                                     22,
-                                    15,
-                                    48,
-                                    57,
-                                    239,
-                                    33,
-                                    175,
+                                    47,
+                                    44,
+                                    126,
+                                    200,
+                                    121,
+                                    91,
+                                    208,
+                                    128,
+                                    12,
+                                    20,
+                                    98,
+                                    148,
+                                    158,
+                                    35,
+                                    40,
                                     209,
-                                    86,
-                                    83,
-                                    118,
-                                    239,
-                                    202
+                                    221,
+                                    90
                                 ];
                             }
                         ];
@@ -2847,7 +2862,7 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "program";
-                    "address": "JAZWcGrpSWNPTBj8QtJ9UyQqhJCDhG9GJkDeMf5NQBiq";
+                    "address": "DLv3NggMiSaef97YCkew5xKUHDh13tVGZ7tydt3ZeAru";
                 }
             ];
             "args": [
@@ -4102,7 +4117,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -4511,78 +4531,93 @@ export type SvmSpoke = {
     "errors": [
         {
             "code": 6000;
-            "name": "invalidQuoteTimestamp";
-            "msg": "Invalid quote timestamp!";
+            "name": "notOwner";
+            "msg": "Only the owner can call this function!";
         },
         {
             "code": 6001;
-            "name": "invalidFillDeadline";
-            "msg": "Invalid fill deadline!";
+            "name": "invalidRelayHash";
+            "msg": "Invalid relay hash!";
         },
         {
             "code": 6002;
-            "name": "notExclusiveRelayer";
-            "msg": "Caller is not the exclusive relayer and exclusivity deadline has not passed!";
+            "name": "canOnlyCloseFillStatusPdaIfFillDeadlinePassed";
+            "msg": "The fill deadline has not passed!";
         },
         {
             "code": 6003;
-            "name": "noSlowFillsInExclusivityWindow";
-            "msg": "The Deposit is still within the exclusivity window!";
+            "name": "notRelayer";
+            "msg": "The caller is not the relayer!";
         },
         {
             "code": 6004;
-            "name": "relayFilled";
-            "msg": "The relay has already been filled!";
+            "name": "cannotSetCurrentTime";
+            "msg": "Cannot set time if not in test mode!";
         },
         {
             "code": 6005;
-            "name": "invalidSlowFillRequest";
-            "msg": "Slow fill requires status of Unfilled!";
+            "name": "invalidRemoteDomain";
+            "msg": "Invalid remote domain!";
         },
         {
             "code": 6006;
-            "name": "expiredFillDeadline";
-            "msg": "The fill deadline has passed!";
+            "name": "invalidRemoteSender";
+            "msg": "Invalid remote sender!";
         },
         {
             "code": 6007;
-            "name": "invalidMerkleProof";
-            "msg": "Invalid Merkle proof!";
+            "name": "invalidMint";
+            "msg": "Invalid mint!";
         },
         {
             "code": 6008;
-            "name": "invalidChainId";
-            "msg": "Invalid chain id!";
+            "name": "exceededPendingBridgeAmount";
+            "msg": "Exceeded pending bridge amount to HubPool!";
         },
         {
             "code": 6009;
-            "name": "invalidMerkleLeaf";
-            "msg": "Invalid Merkle leaf!";
+            "name": "paramsWriteOverflow";
+            "msg": "Overflow writing to parameters account!";
         },
         {
             "code": 6010;
-            "name": "claimedMerkleLeaf";
-            "msg": "Leaf already claimed!";
+            "name": "invalidRefund";
+            "msg": "Invalid refund address!";
         },
         {
             "code": 6011;
-            "name": "depositsArePaused";
-            "msg": "Deposits are currently paused!";
+            "name": "zeroRefundClaim";
+            "msg": "Zero relayer refund claim!";
         },
         {
             "code": 6012;
-            "name": "fillsArePaused";
-            "msg": "Fills are currently paused!";
+            "name": "nonZeroRefundClaim";
+            "msg": "Cannot close non-zero relayer refund claim!";
         },
         {
             "code": 6013;
-            "name": "insufficientSpokePoolBalanceToExecuteLeaf";
-            "msg": "Insufficient spoke pool balance to execute leaf";
+            "name": "invalidClaimInitializer";
+            "msg": "Invalid claim initializer!";
         },
         {
             "code": 6014;
-            "name": "invalidExclusiveRelayer";
-            "msg": "Invalid exclusive relayer!";
+            "name": "invalidRefundTokenAccount";
+            "msg": "Invalid refund token account!";
+        },
+        {
+            "code": 6015;
+            "name": "invalidProductionSeed";
+            "msg": "Seed must be 0 in production!";
+        },
+        {
+            "code": 6016;
+            "name": "invalidAtaCreationAccounts";
+            "msg": "Invalid remaining accounts for ATA creation!";
+        },
+        {
+            "code": 6017;
+            "name": "invalidDelegatePda";
+            "msg": "Invalid delegate PDA!";
         }
     ];
     "types": [
@@ -4857,7 +4892,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";
@@ -4943,7 +4983,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "outputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "destinationChainId";
@@ -5064,7 +5109,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";
@@ -5228,7 +5278,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";

package/dist/test/svm/SvmSpoke.Deposit.js

@@ -411,7 +411,11 @@ describe("svm_spoke.deposit", () => {
         });
         // Create wSOL user account.
         const createIx = (0, spl_token_1.createAssociatedTokenAccountIdempotentInstruction)(depositor.publicKey, depositorTA, depositor.publicKey, inputToken);
-        const nativeDepositData = { ...depositData, inputAmount: new anchor_1.BN(nativeAmount), outputAmount: new anchor_1.BN(nativeAmount) };
+        const nativeDepositData = {
+            ...depositData,
+            inputAmount: new anchor_1.BN(nativeAmount),
+            outputAmount: (0, web3_v1_1.intToU8Array32)(nativeAmount),
+        };
         const depositDataValues = Object.values(nativeDepositData);
         const delegate = (0, web3_v1_1.getDepositPda)(nativeDepositData, program.programId);
         const approveIx = await (0, spl_token_1.createApproveCheckedInstruction)(depositAccounts.depositorTokenAccount, depositAccounts.mint, delegate, depositor.publicKey, BigInt(nativeAmount), nativeDecimals, undefined, tokenProgram);
@@ -443,7 +447,11 @@ describe("svm_spoke.deposit", () => {
         });
         // Sync the user token account with the native balance.
         const syncIx = (0, spl_token_1.createSyncNativeInstruction)(depositorTA);
-        const nativeDepositData = { ...depositData, inputAmount: new anchor_1.BN(nativeAmount), outputAmount: new anchor_1.BN(nativeAmount) };
+        const nativeDepositData = {
+            ...depositData,
+            inputAmount: new anchor_1.BN(nativeAmount),
+            outputAmount: (0, web3_v1_1.intToU8Array32)(nativeAmount),
+        };
         const depositDataValues = Object.values(nativeDepositData);
         const delegate = (0, web3_v1_1.getDepositPda)(nativeDepositData, program.programId);
         const approveIx = await (0, spl_token_1.createApproveCheckedInstruction)(depositAccounts.depositorTokenAccount, depositAccounts.mint, delegate, depositor.publicKey, BigInt(nativeAmount), nativeDecimals, undefined, tokenProgram);
@@ -480,6 +488,16 @@ describe("svm_spoke.deposit", () => {
         const vaultAccount = await (0, spl_token_1.getAccount)(connection, vault);
         assertSE(vaultAccount.amount, depositData.inputAmount, "Vault balance should equal the deposited amount");
     });
+    it("Output token cannot be zero address", async () => {
+        const invalidDepositData = { ...depositData, outputToken: new web3_js_1.PublicKey("11111111111111111111111111111111") };
+        try {
+            await approvedDeposit(invalidDepositData);
+            assert.fail("Should not be able to process deposit with zero output token address");
+        }
+        catch (err) {
+            assert.include(err.toString(), "Error Code: InvalidOutputToken", "Expected InvalidOutputToken error");
+        }
+    });
     describe("codama client and solana kit", () => {
         it("Deposit with with solana kit and codama client", async () => {
             // typescript is not happy with the depositData object
@@ -512,7 +530,7 @@ describe("svm_spoke.deposit", () => {
                 inputToken: (0, kit_1.address)(depositData.inputToken.toString()),
                 outputToken: (0, kit_1.address)(depositData.outputToken.toString()),
                 inputAmount: BigInt(depositData.inputAmount.toString()),
-                outputAmount: BigInt(depositData.outputAmount.toString()),
+                outputAmount: new Uint8Array(depositData.outputAmount),
                 destinationChainId: depositData.destinationChainId.toNumber(),
                 exclusiveRelayer: (0, kit_1.address)(depositData.exclusiveRelayer.toString()),
                 quoteTimestamp: depositData.quoteTimestamp.toNumber(),

package/dist/test/svm/SvmSpoke.Fill.AcrossPlus.js

@@ -103,7 +103,7 @@ describe("svm_spoke.fill.across_plus", () => {
             exclusiveRelayer: relayer.publicKey,
             inputToken: mint, // This is lazy. it should be an encoded token from a separate domain most likely.
             outputToken: mint,
-            inputAmount: new anchor_1.BN(relayAmount),
+            inputAmount: (0, web3_v1_1.intToU8Array32)(relayAmount),
             outputAmount: new anchor_1.BN(relayAmount),
             originChainId: new anchor_1.BN(1),
             depositId: (0, web3_v1_1.intToU8Array32)(Math.floor(Math.random() * 1000000)), // force that we always have a new deposit id.
@@ -188,7 +188,7 @@ describe("svm_spoke.fill.across_plus", () => {
         };
         it("Max token distributions within invoked message call, regular params", async () => {
             // Larger distribution would exceed message size limits.
-            const numberOfDistributions = 7;
+            const numberOfDistributions = 6;
             await fillTokenDistributions(numberOfDistributions);
         });
         it("Max token distributions within invoked message call, buffer account params", async () => {
@@ -305,7 +305,7 @@ describe("svm_spoke.fill.across_plus", () => {
                     exclusiveRelayer: (0, kit_1.address)(relayData.exclusiveRelayer.toString()),
                     inputToken: (0, kit_1.address)(relayData.inputToken.toString()),
                     outputToken: (0, kit_1.address)(relayData.outputToken.toString()),
-                    inputAmount: relayData.inputAmount.toNumber(),
+                    inputAmount: new Uint8Array(relayData.inputAmount),
                     outputAmount: relayData.outputAmount.toNumber(),
                     originChainId: relayData.originChainId.toNumber(),
                     depositId: new Uint8Array(relayData.depositId),

package/dist/test/svm/SvmSpoke.Fill.js

@@ -99,7 +99,7 @@ describe("svm_spoke.fill", () => {
             exclusiveRelayer: relayer.publicKey,
             inputToken: mint, // This is lazy. it should be an encoded token from a separate domain most likely.
             outputToken: mint,
-            inputAmount: new anchor_1.BN(relayAmount),
+            inputAmount: (0, web3_v1_1.intToU8Array32)(relayAmount),
             outputAmount: new anchor_1.BN(relayAmount),
             originChainId: new anchor_1.BN(1),
             depositId: (0, web3_v1_1.intToU8Array32)(Math.floor(Math.random() * 1000000)), // force that we always have a new deposit id.
@@ -493,7 +493,7 @@ describe("svm_spoke.fill", () => {
                     exclusiveRelayer: (0, kit_1.address)(relayData.exclusiveRelayer.toString()),
                     inputToken: (0, kit_1.address)(relayData.inputToken.toString()),
                     outputToken: (0, kit_1.address)(relayData.outputToken.toString()),
-                    inputAmount: relayData.inputAmount.toNumber(),
+                    inputAmount: new Uint8Array(relayData.inputAmount),
                     outputAmount: relayData.outputAmount.toNumber(),
                     originChainId: relayData.originChainId.toNumber(),
                     depositId: new Uint8Array(relayData.depositId),
@@ -572,7 +572,7 @@ describe("svm_spoke.fill", () => {
                     exclusiveRelayer: (0, kit_1.address)(relayData.exclusiveRelayer.toString()),
                     inputToken: (0, kit_1.address)(relayData.inputToken.toString()),
                     outputToken: (0, kit_1.address)(relayData.outputToken.toString()),
-                    inputAmount: relayData.inputAmount.toNumber(),
+                    inputAmount: new Uint8Array(relayData.inputAmount),
                     outputAmount: relayData.outputAmount.toNumber(),
                     originChainId: relayData.originChainId.toNumber(),
                     depositId: new Uint8Array(relayData.depositId),

package/dist/test/svm/SvmSpoke.SlowFill.AcrossPlus.js

@@ -167,7 +167,7 @@ describe("svm_spoke.slow_fill.across_plus", () => {
             exclusiveRelayer: relayer.publicKey,
             inputToken: mint, // This is lazy. it should be an encoded token from a separate domain most likely.
             outputToken: mint,
-            inputAmount: new anchor_1.BN(relayAmount),
+            inputAmount: (0, web3_v1_1.intToU8Array32)(relayAmount),
             outputAmount: new anchor_1.BN(relayAmount),
             originChainId: new anchor_1.BN(1),
             depositId: (0, web3_v1_1.intToU8Array32)(Math.floor(Math.random() * 1000000)), // Unique ID for each test.
@@ -197,7 +197,7 @@ describe("svm_spoke.slow_fill.across_plus", () => {
         // Request and execute slow fill.
         const { requestIx, executeIx } = await createSlowFillIx(multicallHandlerCoder);
         await (0, web3_js_1.sendAndConfirmTransaction)(connection, new web3_js_1.Transaction().add(requestIx), [relayer]);
-        await (0, web3_js_1.sendAndConfirmTransaction)(connection, new web3_js_1.Transaction().add(executeIx), [relayer]);
+        await (0, web3_v1_1.sendTransactionWithLookupTable)(connection, [executeIx], relayer);
         // Verify vault's balance after the fill
         const fVaultBal = (await (0, spl_token_1.getAccount)(connection, vault)).amount;
         assertSE(fVaultBal, iVaultBal - BigInt(relayAmount), "Vault's balance should be reduced by the relay amount");
@@ -266,7 +266,7 @@ describe("svm_spoke.slow_fill.across_plus", () => {
         };
         it("Max token distributions within invoked message call, regular params", async () => {
             // Larger distribution would exceed message size limits.
-            const numberOfDistributions = 6;
+            const numberOfDistributions = 5;
             await fillTokenDistributions(numberOfDistributions);
         });
         it("Max token distributions within invoked message call, buffer account params", async () => {

package/dist/test/svm/SvmSpoke.SlowFill.js

@@ -86,7 +86,7 @@ describe("svm_spoke.slow_fill", () => {
                 exclusiveRelayer: relayer.publicKey,
                 inputToken: mint,
                 outputToken: mint,
-                inputAmount: new anchor_1.BN(relayAmount),
+                inputAmount: (0, web3_v1_1.intToU8Array32)(relayAmount),
                 outputAmount: new anchor_1.BN(relayAmount),
                 originChainId: new anchor_1.BN(1),
                 depositId: (0, web3_v1_1.intToU8Array32)(Math.floor(Math.random() * 1000000)), // Unique ID for each test.
@@ -142,7 +142,7 @@ describe("svm_spoke.slow_fill", () => {
             exclusiveRelayer: relayer.publicKey,
             inputToken: mint, // This is lazy. it should be an encoded token from a separate domain most likely.
             outputToken: mint,
-            inputAmount: new anchor_1.BN(relayAmount),
+            inputAmount: (0, web3_v1_1.intToU8Array32)(relayAmount),
             outputAmount: new anchor_1.BN(relayAmount),
             originChainId: new anchor_1.BN(1),
             depositId: (0, web3_v1_1.intToU8Array32)(1),

package/dist/test/svm/SvmSpoke.common.js

@@ -128,7 +128,7 @@ exports.common = {
         inputToken: null, // Placeholder, to be assigned in the test file
         outputToken,
         inputAmount,
-        outputAmount,
+        outputAmount: (0, web3_v1_1.intToU8Array32)(outputAmount),
         destinationChainId,
         exclusiveRelayer,
         quoteTimestamp,

package/package.json

@@ -1,6 +1,6 @@
 {
   "name": "@across-protocol/contracts",
-  "version": "4.0.13",
+  "version": "4.0.14-alpha.2",
   "author": "UMA Team",
   "license": "AGPL-3.0-only",
   "repository": {
@@ -73,8 +73,8 @@
     "zksync-web3": "^0.14.3"
   },
   "devDependencies": {
-    "@codama/nodes-from-anchor": "^1.2.0",
-    "@codama/renderers-js": "^1.2.14",
+    "@codama/nodes-from-anchor": "^1.1.0",
+    "@codama/renderers-js": "^1.1.1",
     "@consensys/linea-sdk": "^0.1.6",
     "@matterlabs/hardhat-zksync-deploy": "^0.6.3",
     "@matterlabs/hardhat-zksync-solc": "^1.1.4",
@@ -95,7 +95,7 @@
     "@typescript-eslint/eslint-plugin": "^4.29.1",
     "@typescript-eslint/parser": "^4.29.1",
     "chai": "^4.3.7",
-    "codama": "^1.3.0",
+    "codama": "^1.2.0",
     "dotenv": "^10.0.0",
     "eslint": "^7.29.0",
     "eslint-config-prettier": "^8.3.0",

package/dist/src/svm/clients/MessageTransmitter/accounts/index.d.ts

@@ -1,10 +0,0 @@
-/**
- * This code was AUTOGENERATED using the codama library.
- * Please DO NOT EDIT THIS FILE, instead use visitors
- * to add features, then rerun codama to update it.
- *
- * @see https://github.com/codama-idl/codama
- */
-export * from './messageSent';
-export * from './messageTransmitter';
-export * from './usedNonces';

package/dist/src/svm/clients/MessageTransmitter/accounts/index.js

@@ -1,26 +0,0 @@
-"use strict";
-/**
- * This code was AUTOGENERATED using the codama library.
- * Please DO NOT EDIT THIS FILE, instead use visitors
- * to add features, then rerun codama to update it.
- *
- * @see https://github.com/codama-idl/codama
- */
-var __createBinding = (this && this.__createBinding) || (Object.create ? (function(o, m, k, k2) {
-    if (k2 === undefined) k2 = k;
-    var desc = Object.getOwnPropertyDescriptor(m, k);
-    if (!desc || ("get" in desc ? !m.__esModule : desc.writable || desc.configurable)) {
-      desc = { enumerable: true, get: function() { return m[k]; } };
-    }
-    Object.defineProperty(o, k2, desc);
-}) : (function(o, m, k, k2) {
-    if (k2 === undefined) k2 = k;
-    o[k2] = m[k];
-}));
-var __exportStar = (this && this.__exportStar) || function(m, exports) {
-    for (var p in m) if (p !== "default" && !Object.prototype.hasOwnProperty.call(exports, p)) __createBinding(exports, m, p);
-};
-Object.defineProperty(exports, "__esModule", { value: true });
-__exportStar(require("./messageSent"), exports);
-__exportStar(require("./messageTransmitter"), exports);
-__exportStar(require("./usedNonces"), exports);

package/dist/src/svm/clients/MessageTransmitter/accounts/messageSent.d.ts

@@ -1,28 +0,0 @@
-/**
- * This code was AUTOGENERATED using the codama library.
- * Please DO NOT EDIT THIS FILE, instead use visitors
- * to add features, then rerun codama to update it.
- *
- * @see https://github.com/codama-idl/codama
- */
-import { fetchEncodedAccount, fetchEncodedAccounts, type Account, type Address, type Codec, type Decoder, type EncodedAccount, type Encoder, type FetchAccountConfig, type FetchAccountsConfig, type MaybeAccount, type MaybeEncodedAccount, type ReadonlyUint8Array } from '@solana/kit';
-export declare const MESSAGE_SENT_DISCRIMINATOR: Uint8Array;
-export declare function getMessageSentDiscriminatorBytes(): ReadonlyUint8Array;
-export type MessageSent = {
-    discriminator: ReadonlyUint8Array;
-    rentPayer: Address;
-    message: ReadonlyUint8Array;
-};
-export type MessageSentArgs = {
-    rentPayer: Address;
-    message: ReadonlyUint8Array;
-};
-export declare function getMessageSentEncoder(): Encoder<MessageSentArgs>;
-export declare function getMessageSentDecoder(): Decoder<MessageSent>;
-export declare function getMessageSentCodec(): Codec<MessageSentArgs, MessageSent>;
-export declare function decodeMessageSent<TAddress extends string = string>(encodedAccount: EncodedAccount<TAddress>): Account<MessageSent, TAddress>;
-export declare function decodeMessageSent<TAddress extends string = string>(encodedAccount: MaybeEncodedAccount<TAddress>): MaybeAccount<MessageSent, TAddress>;
-export declare function fetchMessageSent<TAddress extends string = string>(rpc: Parameters<typeof fetchEncodedAccount>[0], address: Address<TAddress>, config?: FetchAccountConfig): Promise<Account<MessageSent, TAddress>>;
-export declare function fetchMaybeMessageSent<TAddress extends string = string>(rpc: Parameters<typeof fetchEncodedAccount>[0], address: Address<TAddress>, config?: FetchAccountConfig): Promise<MaybeAccount<MessageSent, TAddress>>;
-export declare function fetchAllMessageSent(rpc: Parameters<typeof fetchEncodedAccounts>[0], addresses: Array<Address>, config?: FetchAccountsConfig): Promise<Account<MessageSent>[]>;
-export declare function fetchAllMaybeMessageSent(rpc: Parameters<typeof fetchEncodedAccounts>[0], addresses: Array<Address>, config?: FetchAccountsConfig): Promise<MaybeAccount<MessageSent>[]>;