@across-protocol/contracts 4.0.13 → 4.0.14-alpha.2

package/dist/src/svm/assets/svm_spoke.d.ts

@@ -5,7 +5,7 @@
  * IDL can be found at `target/idl/svm_spoke.json`.
  */
 export type SvmSpoke = {
-    "address": "JAZWcGrpSWNPTBj8QtJ9UyQqhJCDhG9GJkDeMf5NQBiq";
+    "address": "DLv3NggMiSaef97YCkew5xKUHDh13tVGZ7tydt3ZeAru";
     "metadata": {
         "name": "svmSpoke";
         "version": "0.1.0";
@@ -751,6 +751,7 @@ export type SvmSpoke = {
                 "amount will be sent to the relayer on their repayment chain of choice as a refund following an optimistic",
                 "challenge window in the HubPool, less a system fee.",
                 "- output_amount: The amount of output tokens that the relayer will send to the recipient on the destination.",
+                "This is big-endian encoded as a 32-byte array to match its underlying byte representation on EVM side.",
                 "- destination_chain_id: The destination chain identifier where the fill should be made.",
                 "- exclusive_relayer: The relayer that will be exclusively allowed to fill this deposit before the exclusivity",
                 "deadline timestamp. This must be a valid, non-zero address if the exclusivity deadline is greater than the",
@@ -992,7 +993,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -1252,7 +1258,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -1978,7 +1989,10 @@ export type SvmSpoke = {
                 "- _root_bundle_id: Unique ID of root bundle containing slow relay root that this leaf is contained in.",
                 "- proof: Inclusion proof for this leaf in slow relay root in root bundle.",
                 "Note: slow_fill_leaf, _root_bundle_id, and proof are optional parameters. If None for any of these is passed,",
-                "the caller must load them via the instruction_params account."
+                "the caller must load them via the instruction_params account.",
+                "Note: When verifying the slow fill leaf, the relay data is hashed using AnchorSerialize::serialize that encodes",
+                "output token amounts to little-endian format while input token amount preserves its big-endian encoding as it",
+                "is passed as [u8; 32] array."
             ];
             "discriminator": [
                 26,
@@ -2344,6 +2358,7 @@ export type SvmSpoke = {
                 "token on the repayment chain will be sent as a refund to the caller.",
                 "- output_token: The token that the caller will send to the recipient on this chain.",
                 "- input_amount: This amount, less a system fee, will be sent to the caller on their repayment chain.",
+                "This is big-endian encoded as a 32-byte array to match its underlying byte representation on EVM side",
                 "- output_amount: The amount of output tokens that the caller will send to the recipient.",
                 "- origin_chain_id: The origin chain identifier.",
                 "- exclusive_relayer: The relayer that will be exclusively allowed to fill this deposit before the",
@@ -2723,38 +2738,38 @@ export type SvmSpoke = {
                             {
                                 "kind": "const";
                                 "value": [
-                                    255,
-                                    9,
-                                    170,
-                                    45,
-                                    62,
-                                    177,
-                                    188,
-                                    157,
-                                    161,
-                                    158,
+                                    183,
+                                    102,
+                                    64,
+                                    134,
+                                    222,
+                                    55,
+                                    238,
+                                    112,
                                     130,
-                                    38,
-                                    73,
-                                    48,
-                                    225,
-                                    61,
-                                    57,
-                                    147,
-                                    225,
+                                    28,
+                                    16,
+                                    68,
+                                    91,
                                     22,
-                                    15,
-                                    48,
-                                    57,
-                                    239,
-                                    33,
-                                    175,
+                                    47,
+                                    44,
+                                    126,
+                                    200,
+                                    121,
+                                    91,
+                                    208,
+                                    128,
+                                    12,
+                                    20,
+                                    98,
+                                    148,
+                                    158,
+                                    35,
+                                    40,
                                     209,
-                                    86,
-                                    83,
-                                    118,
-                                    239,
-                                    202
+                                    221,
+                                    90
                                 ];
                             }
                         ];
@@ -2847,7 +2862,7 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "program";
-                    "address": "JAZWcGrpSWNPTBj8QtJ9UyQqhJCDhG9GJkDeMf5NQBiq";
+                    "address": "DLv3NggMiSaef97YCkew5xKUHDh13tVGZ7tydt3ZeAru";
                 }
             ];
             "args": [
@@ -4102,7 +4117,12 @@ export type SvmSpoke = {
                 },
                 {
                     "name": "outputAmount";
-                    "type": "u64";
+                    "type": {
+                        "array": [
+                            "u8",
+                            32
+                        ];
+                    };
                 },
                 {
                     "name": "destinationChainId";
@@ -4511,78 +4531,93 @@ export type SvmSpoke = {
     "errors": [
         {
             "code": 6000;
-            "name": "invalidQuoteTimestamp";
-            "msg": "Invalid quote timestamp!";
+            "name": "notOwner";
+            "msg": "Only the owner can call this function!";
         },
         {
             "code": 6001;
-            "name": "invalidFillDeadline";
-            "msg": "Invalid fill deadline!";
+            "name": "invalidRelayHash";
+            "msg": "Invalid relay hash!";
         },
         {
             "code": 6002;
-            "name": "notExclusiveRelayer";
-            "msg": "Caller is not the exclusive relayer and exclusivity deadline has not passed!";
+            "name": "canOnlyCloseFillStatusPdaIfFillDeadlinePassed";
+            "msg": "The fill deadline has not passed!";
         },
         {
             "code": 6003;
-            "name": "noSlowFillsInExclusivityWindow";
-            "msg": "The Deposit is still within the exclusivity window!";
+            "name": "notRelayer";
+            "msg": "The caller is not the relayer!";
         },
         {
             "code": 6004;
-            "name": "relayFilled";
-            "msg": "The relay has already been filled!";
+            "name": "cannotSetCurrentTime";
+            "msg": "Cannot set time if not in test mode!";
         },
         {
             "code": 6005;
-            "name": "invalidSlowFillRequest";
-            "msg": "Slow fill requires status of Unfilled!";
+            "name": "invalidRemoteDomain";
+            "msg": "Invalid remote domain!";
         },
         {
             "code": 6006;
-            "name": "expiredFillDeadline";
-            "msg": "The fill deadline has passed!";
+            "name": "invalidRemoteSender";
+            "msg": "Invalid remote sender!";
         },
         {
             "code": 6007;
-            "name": "invalidMerkleProof";
-            "msg": "Invalid Merkle proof!";
+            "name": "invalidMint";
+            "msg": "Invalid mint!";
         },
         {
             "code": 6008;
-            "name": "invalidChainId";
-            "msg": "Invalid chain id!";
+            "name": "exceededPendingBridgeAmount";
+            "msg": "Exceeded pending bridge amount to HubPool!";
         },
         {
             "code": 6009;
-            "name": "invalidMerkleLeaf";
-            "msg": "Invalid Merkle leaf!";
+            "name": "paramsWriteOverflow";
+            "msg": "Overflow writing to parameters account!";
         },
         {
             "code": 6010;
-            "name": "claimedMerkleLeaf";
-            "msg": "Leaf already claimed!";
+            "name": "invalidRefund";
+            "msg": "Invalid refund address!";
         },
         {
             "code": 6011;
-            "name": "depositsArePaused";
-            "msg": "Deposits are currently paused!";
+            "name": "zeroRefundClaim";
+            "msg": "Zero relayer refund claim!";
         },
         {
             "code": 6012;
-            "name": "fillsArePaused";
-            "msg": "Fills are currently paused!";
+            "name": "nonZeroRefundClaim";
+            "msg": "Cannot close non-zero relayer refund claim!";
         },
         {
             "code": 6013;
-            "name": "insufficientSpokePoolBalanceToExecuteLeaf";
-            "msg": "Insufficient spoke pool balance to execute leaf";
+            "name": "invalidClaimInitializer";
+            "msg": "Invalid claim initializer!";
         },
         {
             "code": 6014;
-            "name": "invalidExclusiveRelayer";
-            "msg": "Invalid exclusive relayer!";
+            "name": "invalidRefundTokenAccount";
+            "msg": "Invalid refund token account!";
+        },
+        {
+            "code": 6015;
+            "name": "invalidProductionSeed";
+            "msg": "Seed must be 0 in production!";
+        },
+        {
+            "code": 6016;
+            "name": "invalidAtaCreationAccounts";
+            "msg": "Invalid remaining accounts for ATA creation!";
+        },
+        {
+            "code": 6017;
+            "name": "invalidDelegatePda";
+            "msg": "Invalid delegate PDA!";
         }
     ];
     "types": [
@@ -4857,7 +4892,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";
@@ -4943,7 +4983,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "outputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "destinationChainId";
@@ -5064,7 +5109,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";
@@ -5228,7 +5278,12 @@ export type SvmSpoke = {
                     },
                     {
                         "name": "inputAmount";
-                        "type": "u64";
+                        "type": {
+                            "array": [
+                                "u8",
+                                32
+                            ];
+                        };
                     },
                     {
                         "name": "outputAmount";

package/dist/src/svm/clients/MulticallHandler/programs/multicallHandler.d.ts

@@ -7,13 +7,13 @@
  */
 import { type Address, type ReadonlyUint8Array } from '@solana/kit';
 import { type ParsedHandleV3AcrossMessageInstruction } from '../instructions';
-export declare const MULTICALL_HANDLER_PROGRAM_ADDRESS: Address<"Fk1RpqsfeWt8KnFCTW9NQVdVxYvxuqjGn6iPB9wrmM8h">;
+export declare const MULTICALL_HANDLER_PROGRAM_ADDRESS: Address<"HaQe51FWtnmaEcuYEfPA7MRCXKrtqptat4oJdJ8zV5Be">;
 export declare enum MulticallHandlerInstruction {
     HandleV3AcrossMessage = 0
 }
 export declare function identifyMulticallHandlerInstruction(instruction: {
     data: ReadonlyUint8Array;
 } | ReadonlyUint8Array): MulticallHandlerInstruction;
-export type ParsedMulticallHandlerInstruction<TProgram extends string = 'Fk1RpqsfeWt8KnFCTW9NQVdVxYvxuqjGn6iPB9wrmM8h'> = {
+export type ParsedMulticallHandlerInstruction<TProgram extends string = 'HaQe51FWtnmaEcuYEfPA7MRCXKrtqptat4oJdJ8zV5Be'> = {
     instructionType: MulticallHandlerInstruction.HandleV3AcrossMessage;
 } & ParsedHandleV3AcrossMessageInstruction<TProgram>;

package/dist/src/svm/clients/MulticallHandler/programs/multicallHandler.js

@@ -10,7 +10,7 @@ Object.defineProperty(exports, "__esModule", { value: true });
 exports.MulticallHandlerInstruction = exports.MULTICALL_HANDLER_PROGRAM_ADDRESS = void 0;
 exports.identifyMulticallHandlerInstruction = identifyMulticallHandlerInstruction;
 const kit_1 = require("@solana/kit");
-exports.MULTICALL_HANDLER_PROGRAM_ADDRESS = 'Fk1RpqsfeWt8KnFCTW9NQVdVxYvxuqjGn6iPB9wrmM8h';
+exports.MULTICALL_HANDLER_PROGRAM_ADDRESS = 'HaQe51FWtnmaEcuYEfPA7MRCXKrtqptat4oJdJ8zV5Be';
 var MulticallHandlerInstruction;
 (function (MulticallHandlerInstruction) {
     MulticallHandlerInstruction[MulticallHandlerInstruction["HandleV3AcrossMessage"] = 0] = "HandleV3AcrossMessage";

package/dist/src/svm/clients/SvmSpoke/errors/svmSpoke.d.ts

@@ -6,37 +6,43 @@
  * @see https://github.com/codama-idl/codama
  */
 import { type Address, type SOLANA_ERROR__INSTRUCTION_ERROR__CUSTOM, type SolanaError } from '@solana/kit';
-/** InvalidQuoteTimestamp: Invalid quote timestamp! */
-export declare const SVM_SPOKE_ERROR__INVALID_QUOTE_TIMESTAMP = 6000;
-/** InvalidFillDeadline: Invalid fill deadline! */
-export declare const SVM_SPOKE_ERROR__INVALID_FILL_DEADLINE = 6001;
-/** NotExclusiveRelayer: Caller is not the exclusive relayer and exclusivity deadline has not passed! */
-export declare const SVM_SPOKE_ERROR__NOT_EXCLUSIVE_RELAYER = 6002;
-/** NoSlowFillsInExclusivityWindow: The Deposit is still within the exclusivity window! */
-export declare const SVM_SPOKE_ERROR__NO_SLOW_FILLS_IN_EXCLUSIVITY_WINDOW = 6003;
-/** RelayFilled: The relay has already been filled! */
-export declare const SVM_SPOKE_ERROR__RELAY_FILLED = 6004;
-/** InvalidSlowFillRequest: Slow fill requires status of Unfilled! */
-export declare const SVM_SPOKE_ERROR__INVALID_SLOW_FILL_REQUEST = 6005;
-/** ExpiredFillDeadline: The fill deadline has passed! */
-export declare const SVM_SPOKE_ERROR__EXPIRED_FILL_DEADLINE = 6006;
-/** InvalidMerkleProof: Invalid Merkle proof! */
-export declare const SVM_SPOKE_ERROR__INVALID_MERKLE_PROOF = 6007;
-/** InvalidChainId: Invalid chain id! */
-export declare const SVM_SPOKE_ERROR__INVALID_CHAIN_ID = 6008;
-/** InvalidMerkleLeaf: Invalid Merkle leaf! */
-export declare const SVM_SPOKE_ERROR__INVALID_MERKLE_LEAF = 6009;
-/** ClaimedMerkleLeaf: Leaf already claimed! */
-export declare const SVM_SPOKE_ERROR__CLAIMED_MERKLE_LEAF = 6010;
-/** DepositsArePaused: Deposits are currently paused! */
-export declare const SVM_SPOKE_ERROR__DEPOSITS_ARE_PAUSED = 6011;
-/** FillsArePaused: Fills are currently paused! */
-export declare const SVM_SPOKE_ERROR__FILLS_ARE_PAUSED = 6012;
-/** InsufficientSpokePoolBalanceToExecuteLeaf: Insufficient spoke pool balance to execute leaf */
-export declare const SVM_SPOKE_ERROR__INSUFFICIENT_SPOKE_POOL_BALANCE_TO_EXECUTE_LEAF = 6013;
-/** InvalidExclusiveRelayer: Invalid exclusive relayer! */
-export declare const SVM_SPOKE_ERROR__INVALID_EXCLUSIVE_RELAYER = 6014;
-export type SvmSpokeError = typeof SVM_SPOKE_ERROR__CLAIMED_MERKLE_LEAF | typeof SVM_SPOKE_ERROR__DEPOSITS_ARE_PAUSED | typeof SVM_SPOKE_ERROR__EXPIRED_FILL_DEADLINE | typeof SVM_SPOKE_ERROR__FILLS_ARE_PAUSED | typeof SVM_SPOKE_ERROR__INSUFFICIENT_SPOKE_POOL_BALANCE_TO_EXECUTE_LEAF | typeof SVM_SPOKE_ERROR__INVALID_CHAIN_ID | typeof SVM_SPOKE_ERROR__INVALID_EXCLUSIVE_RELAYER | typeof SVM_SPOKE_ERROR__INVALID_FILL_DEADLINE | typeof SVM_SPOKE_ERROR__INVALID_MERKLE_LEAF | typeof SVM_SPOKE_ERROR__INVALID_MERKLE_PROOF | typeof SVM_SPOKE_ERROR__INVALID_QUOTE_TIMESTAMP | typeof SVM_SPOKE_ERROR__INVALID_SLOW_FILL_REQUEST | typeof SVM_SPOKE_ERROR__NO_SLOW_FILLS_IN_EXCLUSIVITY_WINDOW | typeof SVM_SPOKE_ERROR__NOT_EXCLUSIVE_RELAYER | typeof SVM_SPOKE_ERROR__RELAY_FILLED;
+/** NotOwner: Only the owner can call this function! */
+export declare const SVM_SPOKE_ERROR__NOT_OWNER = 6000;
+/** InvalidRelayHash: Invalid relay hash! */
+export declare const SVM_SPOKE_ERROR__INVALID_RELAY_HASH = 6001;
+/** CanOnlyCloseFillStatusPdaIfFillDeadlinePassed: The fill deadline has not passed! */
+export declare const SVM_SPOKE_ERROR__CAN_ONLY_CLOSE_FILL_STATUS_PDA_IF_FILL_DEADLINE_PASSED = 6002;
+/** NotRelayer: The caller is not the relayer! */
+export declare const SVM_SPOKE_ERROR__NOT_RELAYER = 6003;
+/** CannotSetCurrentTime: Cannot set time if not in test mode! */
+export declare const SVM_SPOKE_ERROR__CANNOT_SET_CURRENT_TIME = 6004;
+/** InvalidRemoteDomain: Invalid remote domain! */
+export declare const SVM_SPOKE_ERROR__INVALID_REMOTE_DOMAIN = 6005;
+/** InvalidRemoteSender: Invalid remote sender! */
+export declare const SVM_SPOKE_ERROR__INVALID_REMOTE_SENDER = 6006;
+/** InvalidMint: Invalid mint! */
+export declare const SVM_SPOKE_ERROR__INVALID_MINT = 6007;
+/** ExceededPendingBridgeAmount: Exceeded pending bridge amount to HubPool! */
+export declare const SVM_SPOKE_ERROR__EXCEEDED_PENDING_BRIDGE_AMOUNT = 6008;
+/** ParamsWriteOverflow: Overflow writing to parameters account! */
+export declare const SVM_SPOKE_ERROR__PARAMS_WRITE_OVERFLOW = 6009;
+/** InvalidRefund: Invalid refund address! */
+export declare const SVM_SPOKE_ERROR__INVALID_REFUND = 6010;
+/** ZeroRefundClaim: Zero relayer refund claim! */
+export declare const SVM_SPOKE_ERROR__ZERO_REFUND_CLAIM = 6011;
+/** NonZeroRefundClaim: Cannot close non-zero relayer refund claim! */
+export declare const SVM_SPOKE_ERROR__NON_ZERO_REFUND_CLAIM = 6012;
+/** InvalidClaimInitializer: Invalid claim initializer! */
+export declare const SVM_SPOKE_ERROR__INVALID_CLAIM_INITIALIZER = 6013;
+/** InvalidRefundTokenAccount: Invalid refund token account! */
+export declare const SVM_SPOKE_ERROR__INVALID_REFUND_TOKEN_ACCOUNT = 6014;
+/** InvalidProductionSeed: Seed must be 0 in production! */
+export declare const SVM_SPOKE_ERROR__INVALID_PRODUCTION_SEED = 6015;
+/** InvalidATACreationAccounts: Invalid remaining accounts for ATA creation! */
+export declare const SVM_SPOKE_ERROR__INVALID_A_T_A_CREATION_ACCOUNTS = 6016;
+/** InvalidDelegatePda: Invalid delegate PDA! */
+export declare const SVM_SPOKE_ERROR__INVALID_DELEGATE_PDA = 6017;
+export type SvmSpokeError = typeof SVM_SPOKE_ERROR__CANNOT_SET_CURRENT_TIME | typeof SVM_SPOKE_ERROR__CAN_ONLY_CLOSE_FILL_STATUS_PDA_IF_FILL_DEADLINE_PASSED | typeof SVM_SPOKE_ERROR__EXCEEDED_PENDING_BRIDGE_AMOUNT | typeof SVM_SPOKE_ERROR__INVALID_A_T_A_CREATION_ACCOUNTS | typeof SVM_SPOKE_ERROR__INVALID_CLAIM_INITIALIZER | typeof SVM_SPOKE_ERROR__INVALID_DELEGATE_PDA | typeof SVM_SPOKE_ERROR__INVALID_MINT | typeof SVM_SPOKE_ERROR__INVALID_PRODUCTION_SEED | typeof SVM_SPOKE_ERROR__INVALID_REFUND | typeof SVM_SPOKE_ERROR__INVALID_REFUND_TOKEN_ACCOUNT | typeof SVM_SPOKE_ERROR__INVALID_RELAY_HASH | typeof SVM_SPOKE_ERROR__INVALID_REMOTE_DOMAIN | typeof SVM_SPOKE_ERROR__INVALID_REMOTE_SENDER | typeof SVM_SPOKE_ERROR__NON_ZERO_REFUND_CLAIM | typeof SVM_SPOKE_ERROR__NOT_OWNER | typeof SVM_SPOKE_ERROR__NOT_RELAYER | typeof SVM_SPOKE_ERROR__PARAMS_WRITE_OVERFLOW | typeof SVM_SPOKE_ERROR__ZERO_REFUND_CLAIM;
 export declare function getSvmSpokeErrorMessage(code: SvmSpokeError): string;
 export declare function isSvmSpokeError<TProgramErrorCode extends SvmSpokeError>(error: unknown, transactionMessage: {
     instructions: Record<number, {

package/dist/src/svm/clients/SvmSpoke/errors/svmSpoke.js

@@ -7,59 +7,68 @@
  * @see https://github.com/codama-idl/codama
  */
 Object.defineProperty(exports, "__esModule", { value: true });
-exports.SVM_SPOKE_ERROR__INVALID_EXCLUSIVE_RELAYER = exports.SVM_SPOKE_ERROR__INSUFFICIENT_SPOKE_POOL_BALANCE_TO_EXECUTE_LEAF = exports.SVM_SPOKE_ERROR__FILLS_ARE_PAUSED = exports.SVM_SPOKE_ERROR__DEPOSITS_ARE_PAUSED = exports.SVM_SPOKE_ERROR__CLAIMED_MERKLE_LEAF = exports.SVM_SPOKE_ERROR__INVALID_MERKLE_LEAF = exports.SVM_SPOKE_ERROR__INVALID_CHAIN_ID = exports.SVM_SPOKE_ERROR__INVALID_MERKLE_PROOF = exports.SVM_SPOKE_ERROR__EXPIRED_FILL_DEADLINE = exports.SVM_SPOKE_ERROR__INVALID_SLOW_FILL_REQUEST = exports.SVM_SPOKE_ERROR__RELAY_FILLED = exports.SVM_SPOKE_ERROR__NO_SLOW_FILLS_IN_EXCLUSIVITY_WINDOW = exports.SVM_SPOKE_ERROR__NOT_EXCLUSIVE_RELAYER = exports.SVM_SPOKE_ERROR__INVALID_FILL_DEADLINE = exports.SVM_SPOKE_ERROR__INVALID_QUOTE_TIMESTAMP = void 0;
+exports.SVM_SPOKE_ERROR__INVALID_DELEGATE_PDA = exports.SVM_SPOKE_ERROR__INVALID_A_T_A_CREATION_ACCOUNTS = exports.SVM_SPOKE_ERROR__INVALID_PRODUCTION_SEED = exports.SVM_SPOKE_ERROR__INVALID_REFUND_TOKEN_ACCOUNT = exports.SVM_SPOKE_ERROR__INVALID_CLAIM_INITIALIZER = exports.SVM_SPOKE_ERROR__NON_ZERO_REFUND_CLAIM = exports.SVM_SPOKE_ERROR__ZERO_REFUND_CLAIM = exports.SVM_SPOKE_ERROR__INVALID_REFUND = exports.SVM_SPOKE_ERROR__PARAMS_WRITE_OVERFLOW = exports.SVM_SPOKE_ERROR__EXCEEDED_PENDING_BRIDGE_AMOUNT = exports.SVM_SPOKE_ERROR__INVALID_MINT = exports.SVM_SPOKE_ERROR__INVALID_REMOTE_SENDER = exports.SVM_SPOKE_ERROR__INVALID_REMOTE_DOMAIN = exports.SVM_SPOKE_ERROR__CANNOT_SET_CURRENT_TIME = exports.SVM_SPOKE_ERROR__NOT_RELAYER = exports.SVM_SPOKE_ERROR__CAN_ONLY_CLOSE_FILL_STATUS_PDA_IF_FILL_DEADLINE_PASSED = exports.SVM_SPOKE_ERROR__INVALID_RELAY_HASH = exports.SVM_SPOKE_ERROR__NOT_OWNER = void 0;
 exports.getSvmSpokeErrorMessage = getSvmSpokeErrorMessage;
 exports.isSvmSpokeError = isSvmSpokeError;
 const kit_1 = require("@solana/kit");
 const programs_1 = require("../programs");
-/** InvalidQuoteTimestamp: Invalid quote timestamp! */
-exports.SVM_SPOKE_ERROR__INVALID_QUOTE_TIMESTAMP = 0x1770; // 6000
-/** InvalidFillDeadline: Invalid fill deadline! */
-exports.SVM_SPOKE_ERROR__INVALID_FILL_DEADLINE = 0x1771; // 6001
-/** NotExclusiveRelayer: Caller is not the exclusive relayer and exclusivity deadline has not passed! */
-exports.SVM_SPOKE_ERROR__NOT_EXCLUSIVE_RELAYER = 0x1772; // 6002
-/** NoSlowFillsInExclusivityWindow: The Deposit is still within the exclusivity window! */
-exports.SVM_SPOKE_ERROR__NO_SLOW_FILLS_IN_EXCLUSIVITY_WINDOW = 0x1773; // 6003
-/** RelayFilled: The relay has already been filled! */
-exports.SVM_SPOKE_ERROR__RELAY_FILLED = 0x1774; // 6004
-/** InvalidSlowFillRequest: Slow fill requires status of Unfilled! */
-exports.SVM_SPOKE_ERROR__INVALID_SLOW_FILL_REQUEST = 0x1775; // 6005
-/** ExpiredFillDeadline: The fill deadline has passed! */
-exports.SVM_SPOKE_ERROR__EXPIRED_FILL_DEADLINE = 0x1776; // 6006
-/** InvalidMerkleProof: Invalid Merkle proof! */
-exports.SVM_SPOKE_ERROR__INVALID_MERKLE_PROOF = 0x1777; // 6007
-/** InvalidChainId: Invalid chain id! */
-exports.SVM_SPOKE_ERROR__INVALID_CHAIN_ID = 0x1778; // 6008
-/** InvalidMerkleLeaf: Invalid Merkle leaf! */
-exports.SVM_SPOKE_ERROR__INVALID_MERKLE_LEAF = 0x1779; // 6009
-/** ClaimedMerkleLeaf: Leaf already claimed! */
-exports.SVM_SPOKE_ERROR__CLAIMED_MERKLE_LEAF = 0x177a; // 6010
-/** DepositsArePaused: Deposits are currently paused! */
-exports.SVM_SPOKE_ERROR__DEPOSITS_ARE_PAUSED = 0x177b; // 6011
-/** FillsArePaused: Fills are currently paused! */
-exports.SVM_SPOKE_ERROR__FILLS_ARE_PAUSED = 0x177c; // 6012
-/** InsufficientSpokePoolBalanceToExecuteLeaf: Insufficient spoke pool balance to execute leaf */
-exports.SVM_SPOKE_ERROR__INSUFFICIENT_SPOKE_POOL_BALANCE_TO_EXECUTE_LEAF = 0x177d; // 6013
-/** InvalidExclusiveRelayer: Invalid exclusive relayer! */
-exports.SVM_SPOKE_ERROR__INVALID_EXCLUSIVE_RELAYER = 0x177e; // 6014
+/** NotOwner: Only the owner can call this function! */
+exports.SVM_SPOKE_ERROR__NOT_OWNER = 0x1770; // 6000
+/** InvalidRelayHash: Invalid relay hash! */
+exports.SVM_SPOKE_ERROR__INVALID_RELAY_HASH = 0x1771; // 6001
+/** CanOnlyCloseFillStatusPdaIfFillDeadlinePassed: The fill deadline has not passed! */
+exports.SVM_SPOKE_ERROR__CAN_ONLY_CLOSE_FILL_STATUS_PDA_IF_FILL_DEADLINE_PASSED = 0x1772; // 6002
+/** NotRelayer: The caller is not the relayer! */
+exports.SVM_SPOKE_ERROR__NOT_RELAYER = 0x1773; // 6003
+/** CannotSetCurrentTime: Cannot set time if not in test mode! */
+exports.SVM_SPOKE_ERROR__CANNOT_SET_CURRENT_TIME = 0x1774; // 6004
+/** InvalidRemoteDomain: Invalid remote domain! */
+exports.SVM_SPOKE_ERROR__INVALID_REMOTE_DOMAIN = 0x1775; // 6005
+/** InvalidRemoteSender: Invalid remote sender! */
+exports.SVM_SPOKE_ERROR__INVALID_REMOTE_SENDER = 0x1776; // 6006
+/** InvalidMint: Invalid mint! */
+exports.SVM_SPOKE_ERROR__INVALID_MINT = 0x1777; // 6007
+/** ExceededPendingBridgeAmount: Exceeded pending bridge amount to HubPool! */
+exports.SVM_SPOKE_ERROR__EXCEEDED_PENDING_BRIDGE_AMOUNT = 0x1778; // 6008
+/** ParamsWriteOverflow: Overflow writing to parameters account! */
+exports.SVM_SPOKE_ERROR__PARAMS_WRITE_OVERFLOW = 0x1779; // 6009
+/** InvalidRefund: Invalid refund address! */
+exports.SVM_SPOKE_ERROR__INVALID_REFUND = 0x177a; // 6010
+/** ZeroRefundClaim: Zero relayer refund claim! */
+exports.SVM_SPOKE_ERROR__ZERO_REFUND_CLAIM = 0x177b; // 6011
+/** NonZeroRefundClaim: Cannot close non-zero relayer refund claim! */
+exports.SVM_SPOKE_ERROR__NON_ZERO_REFUND_CLAIM = 0x177c; // 6012
+/** InvalidClaimInitializer: Invalid claim initializer! */
+exports.SVM_SPOKE_ERROR__INVALID_CLAIM_INITIALIZER = 0x177d; // 6013
+/** InvalidRefundTokenAccount: Invalid refund token account! */
+exports.SVM_SPOKE_ERROR__INVALID_REFUND_TOKEN_ACCOUNT = 0x177e; // 6014
+/** InvalidProductionSeed: Seed must be 0 in production! */
+exports.SVM_SPOKE_ERROR__INVALID_PRODUCTION_SEED = 0x177f; // 6015
+/** InvalidATACreationAccounts: Invalid remaining accounts for ATA creation! */
+exports.SVM_SPOKE_ERROR__INVALID_A_T_A_CREATION_ACCOUNTS = 0x1780; // 6016
+/** InvalidDelegatePda: Invalid delegate PDA! */
+exports.SVM_SPOKE_ERROR__INVALID_DELEGATE_PDA = 0x1781; // 6017
 let svmSpokeErrorMessages;
 if (process.env.NODE_ENV !== 'production') {
     svmSpokeErrorMessages = {
-        [exports.SVM_SPOKE_ERROR__CLAIMED_MERKLE_LEAF]: `Leaf already claimed!`,
-        [exports.SVM_SPOKE_ERROR__DEPOSITS_ARE_PAUSED]: `Deposits are currently paused!`,
-        [exports.SVM_SPOKE_ERROR__EXPIRED_FILL_DEADLINE]: `The fill deadline has passed!`,
-        [exports.SVM_SPOKE_ERROR__FILLS_ARE_PAUSED]: `Fills are currently paused!`,
-        [exports.SVM_SPOKE_ERROR__INSUFFICIENT_SPOKE_POOL_BALANCE_TO_EXECUTE_LEAF]: `Insufficient spoke pool balance to execute leaf`,
-        [exports.SVM_SPOKE_ERROR__INVALID_CHAIN_ID]: `Invalid chain id!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_EXCLUSIVE_RELAYER]: `Invalid exclusive relayer!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_FILL_DEADLINE]: `Invalid fill deadline!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_MERKLE_LEAF]: `Invalid Merkle leaf!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_MERKLE_PROOF]: `Invalid Merkle proof!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_QUOTE_TIMESTAMP]: `Invalid quote timestamp!`,
-        [exports.SVM_SPOKE_ERROR__INVALID_SLOW_FILL_REQUEST]: `Slow fill requires status of Unfilled!`,
-        [exports.SVM_SPOKE_ERROR__NO_SLOW_FILLS_IN_EXCLUSIVITY_WINDOW]: `The Deposit is still within the exclusivity window!`,
-        [exports.SVM_SPOKE_ERROR__NOT_EXCLUSIVE_RELAYER]: `Caller is not the exclusive relayer and exclusivity deadline has not passed!`,
-        [exports.SVM_SPOKE_ERROR__RELAY_FILLED]: `The relay has already been filled!`,
+        [exports.SVM_SPOKE_ERROR__CANNOT_SET_CURRENT_TIME]: `Cannot set time if not in test mode!`,
+        [exports.SVM_SPOKE_ERROR__CAN_ONLY_CLOSE_FILL_STATUS_PDA_IF_FILL_DEADLINE_PASSED]: `The fill deadline has not passed!`,
+        [exports.SVM_SPOKE_ERROR__EXCEEDED_PENDING_BRIDGE_AMOUNT]: `Exceeded pending bridge amount to HubPool!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_A_T_A_CREATION_ACCOUNTS]: `Invalid remaining accounts for ATA creation!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_CLAIM_INITIALIZER]: `Invalid claim initializer!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_DELEGATE_PDA]: `Invalid delegate PDA!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_MINT]: `Invalid mint!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_PRODUCTION_SEED]: `Seed must be 0 in production!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_REFUND]: `Invalid refund address!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_REFUND_TOKEN_ACCOUNT]: `Invalid refund token account!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_RELAY_HASH]: `Invalid relay hash!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_REMOTE_DOMAIN]: `Invalid remote domain!`,
+        [exports.SVM_SPOKE_ERROR__INVALID_REMOTE_SENDER]: `Invalid remote sender!`,
+        [exports.SVM_SPOKE_ERROR__NON_ZERO_REFUND_CLAIM]: `Cannot close non-zero relayer refund claim!`,
+        [exports.SVM_SPOKE_ERROR__NOT_OWNER]: `Only the owner can call this function!`,
+        [exports.SVM_SPOKE_ERROR__NOT_RELAYER]: `The caller is not the relayer!`,
+        [exports.SVM_SPOKE_ERROR__PARAMS_WRITE_OVERFLOW]: `Overflow writing to parameters account!`,
+        [exports.SVM_SPOKE_ERROR__ZERO_REFUND_CLAIM]: `Zero relayer refund claim!`,
     };
 }
 function getSvmSpokeErrorMessage(code) {

package/dist/src/svm/clients/SvmSpoke/instructions/bridgeTokensToHubPool.js

@@ -114,7 +114,7 @@ async function getBridgeTokensToHubPoolInstructionAsync(input, config) {
     }
     if (!accounts.vault.value) {
         accounts.vault.value = await (0, kit_1.getProgramDerivedAddress)({
-            programAddress: 'ATokenGPvbdGVxr1b2hvZbsiqW5xWH25efTNsLJA8knL',
+            programAddress,
             seeds: [
                 (0, kit_1.getAddressEncoder)().encode((0, shared_1.expectAddress)(accounts.state.value)),
                 (0, kit_1.getAddressEncoder)().encode((0, shared_1.expectAddress)(accounts.tokenProgram.value)),

package/dist/src/svm/clients/SvmSpoke/instructions/claimRelayerRefund.js

@@ -60,7 +60,7 @@ async function getClaimRelayerRefundInstructionAsync(input, config) {
     }
     if (!accounts.vault.value) {
         accounts.vault.value = await (0, kit_1.getProgramDerivedAddress)({
-            programAddress: 'ATokenGPvbdGVxr1b2hvZbsiqW5xWH25efTNsLJA8knL',
+            programAddress,
             seeds: [
                 (0, kit_1.getAddressEncoder)().encode((0, shared_1.expectAddress)(accounts.state.value)),
                 (0, kit_1.getAddressEncoder)().encode((0, shared_1.expectAddress)(accounts.tokenProgram.value)),

package/dist/src/svm/clients/SvmSpoke/instructions/deposit.d.ts

@@ -30,7 +30,7 @@ export type DepositInstructionData = {
     inputToken: Address;
     outputToken: Address;
     inputAmount: bigint;
-    outputAmount: bigint;
+    outputAmount: ReadonlyUint8Array;
     destinationChainId: bigint;
     exclusiveRelayer: Address;
     quoteTimestamp: number;
@@ -44,7 +44,7 @@ export type DepositInstructionDataArgs = {
     inputToken: Address;
     outputToken: Address;
     inputAmount: number | bigint;
-    outputAmount: number | bigint;
+    outputAmount: ReadonlyUint8Array;
     destinationChainId: number | bigint;
     exclusiveRelayer: Address;
     quoteTimestamp: number;