zstdlib 0.13.0-x86_64-linux

data/ext/zstdlib_c/zstd-1.5.6/lib/compress/zstd_compress_internal.h

@@ -0,0 +1,1534 @@
+/*
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+/* This header contains definitions
+ * that shall **only** be used by modules within lib/compress.
+ */
+
+#ifndef ZSTD_COMPRESS_H
+#define ZSTD_COMPRESS_H
+
+/*-*************************************
+*  Dependencies
+***************************************/
+#include "../common/zstd_internal.h"
+#include "zstd_cwksp.h"
+#ifdef ZSTD_MULTITHREAD
+#  include "zstdmt_compress.h"
+#endif
+#include "../common/bits.h" /* ZSTD_highbit32, ZSTD_NbCommonBytes */
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+/*-*************************************
+*  Constants
+***************************************/
+#define kSearchStrength      8
+#define HASH_READ_SIZE       8
+#define ZSTD_DUBT_UNSORTED_MARK 1   /* For btlazy2 strategy, index ZSTD_DUBT_UNSORTED_MARK==1 means "unsorted".
+                                       It could be confused for a real successor at index "1", if sorted as larger than its predecessor.
+                                       It's not a big deal though : candidate will just be sorted again.
+                                       Additionally, candidate position 1 will be lost.
+                                       But candidate 1 cannot hide a large tree of candidates, so it's a minimal loss.
+                                       The benefit is that ZSTD_DUBT_UNSORTED_MARK cannot be mishandled after table reuse with a different strategy.
+                                       This constant is required by ZSTD_compressBlock_btlazy2() and ZSTD_reduceTable_internal() */
+
+
+/*-*************************************
+*  Context memory management
+***************************************/
+typedef enum { ZSTDcs_created=0, ZSTDcs_init, ZSTDcs_ongoing, ZSTDcs_ending } ZSTD_compressionStage_e;
+typedef enum { zcss_init=0, zcss_load, zcss_flush } ZSTD_cStreamStage;
+
+typedef struct ZSTD_prefixDict_s {
+    const void* dict;
+    size_t dictSize;
+    ZSTD_dictContentType_e dictContentType;
+} ZSTD_prefixDict;
+
+typedef struct {
+    void* dictBuffer;
+    void const* dict;
+    size_t dictSize;
+    ZSTD_dictContentType_e dictContentType;
+    ZSTD_CDict* cdict;
+} ZSTD_localDict;
+
+typedef struct {
+    HUF_CElt CTable[HUF_CTABLE_SIZE_ST(255)];
+    HUF_repeat repeatMode;
+} ZSTD_hufCTables_t;
+
+typedef struct {
+    FSE_CTable offcodeCTable[FSE_CTABLE_SIZE_U32(OffFSELog, MaxOff)];
+    FSE_CTable matchlengthCTable[FSE_CTABLE_SIZE_U32(MLFSELog, MaxML)];
+    FSE_CTable litlengthCTable[FSE_CTABLE_SIZE_U32(LLFSELog, MaxLL)];
+    FSE_repeat offcode_repeatMode;
+    FSE_repeat matchlength_repeatMode;
+    FSE_repeat litlength_repeatMode;
+} ZSTD_fseCTables_t;
+
+typedef struct {
+    ZSTD_hufCTables_t huf;
+    ZSTD_fseCTables_t fse;
+} ZSTD_entropyCTables_t;
+
+/***********************************************
+*  Entropy buffer statistics structs and funcs *
+***********************************************/
+/** ZSTD_hufCTablesMetadata_t :
+ *  Stores Literals Block Type for a super-block in hType, and
+ *  huffman tree description in hufDesBuffer.
+ *  hufDesSize refers to the size of huffman tree description in bytes.
+ *  This metadata is populated in ZSTD_buildBlockEntropyStats_literals() */
+typedef struct {
+    symbolEncodingType_e hType;
+    BYTE hufDesBuffer[ZSTD_MAX_HUF_HEADER_SIZE];
+    size_t hufDesSize;
+} ZSTD_hufCTablesMetadata_t;
+
+/** ZSTD_fseCTablesMetadata_t :
+ *  Stores symbol compression modes for a super-block in {ll, ol, ml}Type, and
+ *  fse tables in fseTablesBuffer.
+ *  fseTablesSize refers to the size of fse tables in bytes.
+ *  This metadata is populated in ZSTD_buildBlockEntropyStats_sequences() */
+typedef struct {
+    symbolEncodingType_e llType;
+    symbolEncodingType_e ofType;
+    symbolEncodingType_e mlType;
+    BYTE fseTablesBuffer[ZSTD_MAX_FSE_HEADERS_SIZE];
+    size_t fseTablesSize;
+    size_t lastCountSize; /* This is to account for bug in 1.3.4. More detail in ZSTD_entropyCompressSeqStore_internal() */
+} ZSTD_fseCTablesMetadata_t;
+
+typedef struct {
+    ZSTD_hufCTablesMetadata_t hufMetadata;
+    ZSTD_fseCTablesMetadata_t fseMetadata;
+} ZSTD_entropyCTablesMetadata_t;
+
+/** ZSTD_buildBlockEntropyStats() :
+ *  Builds entropy for the block.
+ *  @return : 0 on success or error code */
+size_t ZSTD_buildBlockEntropyStats(
+                    const seqStore_t* seqStorePtr,
+                    const ZSTD_entropyCTables_t* prevEntropy,
+                          ZSTD_entropyCTables_t* nextEntropy,
+                    const ZSTD_CCtx_params* cctxParams,
+                          ZSTD_entropyCTablesMetadata_t* entropyMetadata,
+                          void* workspace, size_t wkspSize);
+
+/*********************************
+*  Compression internals structs *
+*********************************/
+
+typedef struct {
+    U32 off;            /* Offset sumtype code for the match, using ZSTD_storeSeq() format */
+    U32 len;            /* Raw length of match */
+} ZSTD_match_t;
+
+typedef struct {
+    U32 offset;         /* Offset of sequence */
+    U32 litLength;      /* Length of literals prior to match */
+    U32 matchLength;    /* Raw length of match */
+} rawSeq;
+
+typedef struct {
+  rawSeq* seq;          /* The start of the sequences */
+  size_t pos;           /* The index in seq where reading stopped. pos <= size. */
+  size_t posInSequence; /* The position within the sequence at seq[pos] where reading
+                           stopped. posInSequence <= seq[pos].litLength + seq[pos].matchLength */
+  size_t size;          /* The number of sequences. <= capacity. */
+  size_t capacity;      /* The capacity starting from `seq` pointer */
+} rawSeqStore_t;
+
+typedef struct {
+    U32 idx;            /* Index in array of ZSTD_Sequence */
+    U32 posInSequence;  /* Position within sequence at idx */
+    size_t posInSrc;    /* Number of bytes given by sequences provided so far */
+} ZSTD_sequencePosition;
+
+UNUSED_ATTR static const rawSeqStore_t kNullRawSeqStore = {NULL, 0, 0, 0, 0};
+
+typedef struct {
+    int price;  /* price from beginning of segment to this position */
+    U32 off;    /* offset of previous match */
+    U32 mlen;   /* length of previous match */
+    U32 litlen; /* nb of literals since previous match */
+    U32 rep[ZSTD_REP_NUM];  /* offset history after previous match */
+} ZSTD_optimal_t;
+
+typedef enum { zop_dynamic=0, zop_predef } ZSTD_OptPrice_e;
+
+#define ZSTD_OPT_SIZE (ZSTD_OPT_NUM+3)
+typedef struct {
+    /* All tables are allocated inside cctx->workspace by ZSTD_resetCCtx_internal() */
+    unsigned* litFreq;           /* table of literals statistics, of size 256 */
+    unsigned* litLengthFreq;     /* table of litLength statistics, of size (MaxLL+1) */
+    unsigned* matchLengthFreq;   /* table of matchLength statistics, of size (MaxML+1) */
+    unsigned* offCodeFreq;       /* table of offCode statistics, of size (MaxOff+1) */
+    ZSTD_match_t* matchTable;    /* list of found matches, of size ZSTD_OPT_SIZE */
+    ZSTD_optimal_t* priceTable;  /* All positions tracked by optimal parser, of size ZSTD_OPT_SIZE */
+
+    U32  litSum;                 /* nb of literals */
+    U32  litLengthSum;           /* nb of litLength codes */
+    U32  matchLengthSum;         /* nb of matchLength codes */
+    U32  offCodeSum;             /* nb of offset codes */
+    U32  litSumBasePrice;        /* to compare to log2(litfreq) */
+    U32  litLengthSumBasePrice;  /* to compare to log2(llfreq)  */
+    U32  matchLengthSumBasePrice;/* to compare to log2(mlfreq)  */
+    U32  offCodeSumBasePrice;    /* to compare to log2(offreq)  */
+    ZSTD_OptPrice_e priceType;   /* prices can be determined dynamically, or follow a pre-defined cost structure */
+    const ZSTD_entropyCTables_t* symbolCosts;  /* pre-calculated dictionary statistics */
+    ZSTD_paramSwitch_e literalCompressionMode;
+} optState_t;
+
+typedef struct {
+  ZSTD_entropyCTables_t entropy;
+  U32 rep[ZSTD_REP_NUM];
+} ZSTD_compressedBlockState_t;
+
+typedef struct {
+    BYTE const* nextSrc;       /* next block here to continue on current prefix */
+    BYTE const* base;          /* All regular indexes relative to this position */
+    BYTE const* dictBase;      /* extDict indexes relative to this position */
+    U32 dictLimit;             /* below that point, need extDict */
+    U32 lowLimit;              /* below that point, no more valid data */
+    U32 nbOverflowCorrections; /* Number of times overflow correction has run since
+                                * ZSTD_window_init(). Useful for debugging coredumps
+                                * and for ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY.
+                                */
+} ZSTD_window_t;
+
+#define ZSTD_WINDOW_START_INDEX 2
+
+typedef struct ZSTD_matchState_t ZSTD_matchState_t;
+
+#define ZSTD_ROW_HASH_CACHE_SIZE 8       /* Size of prefetching hash cache for row-based matchfinder */
+
+struct ZSTD_matchState_t {
+    ZSTD_window_t window;   /* State for window round buffer management */
+    U32 loadedDictEnd;      /* index of end of dictionary, within context's referential.
+                             * When loadedDictEnd != 0, a dictionary is in use, and still valid.
+                             * This relies on a mechanism to set loadedDictEnd=0 when dictionary is no longer within distance.
+                             * Such mechanism is provided within ZSTD_window_enforceMaxDist() and ZSTD_checkDictValidity().
+                             * When dict referential is copied into active context (i.e. not attached),
+                             * loadedDictEnd == dictSize, since referential starts from zero.
+                             */
+    U32 nextToUpdate;       /* index from which to continue table update */
+    U32 hashLog3;           /* dispatch table for matches of len==3 : larger == faster, more memory */
+
+    U32 rowHashLog;                          /* For row-based matchfinder: Hashlog based on nb of rows in the hashTable.*/
+    BYTE* tagTable;                          /* For row-based matchFinder: A row-based table containing the hashes and head index. */
+    U32 hashCache[ZSTD_ROW_HASH_CACHE_SIZE]; /* For row-based matchFinder: a cache of hashes to improve speed */
+    U64 hashSalt;                            /* For row-based matchFinder: salts the hash for reuse of tag table */
+    U32 hashSaltEntropy;                     /* For row-based matchFinder: collects entropy for salt generation */
+
+    U32* hashTable;
+    U32* hashTable3;
+    U32* chainTable;
+
+    U32 forceNonContiguous; /* Non-zero if we should force non-contiguous load for the next window update. */
+
+    int dedicatedDictSearch;  /* Indicates whether this matchState is using the
+                               * dedicated dictionary search structure.
+                               */
+    optState_t opt;         /* optimal parser state */
+    const ZSTD_matchState_t* dictMatchState;
+    ZSTD_compressionParameters cParams;
+    const rawSeqStore_t* ldmSeqStore;
+
+    /* Controls prefetching in some dictMatchState matchfinders.
+     * This behavior is controlled from the cctx ms.
+     * This parameter has no effect in the cdict ms. */
+    int prefetchCDictTables;
+
+    /* When == 0, lazy match finders insert every position.
+     * When != 0, lazy match finders only insert positions they search.
+     * This allows them to skip much faster over incompressible data,
+     * at a small cost to compression ratio.
+     */
+    int lazySkipping;
+};
+
+typedef struct {
+    ZSTD_compressedBlockState_t* prevCBlock;
+    ZSTD_compressedBlockState_t* nextCBlock;
+    ZSTD_matchState_t matchState;
+} ZSTD_blockState_t;
+
+typedef struct {
+    U32 offset;
+    U32 checksum;
+} ldmEntry_t;
+
+typedef struct {
+    BYTE const* split;
+    U32 hash;
+    U32 checksum;
+    ldmEntry_t* bucket;
+} ldmMatchCandidate_t;
+
+#define LDM_BATCH_SIZE 64
+
+typedef struct {
+    ZSTD_window_t window;   /* State for the window round buffer management */
+    ldmEntry_t* hashTable;
+    U32 loadedDictEnd;
+    BYTE* bucketOffsets;    /* Next position in bucket to insert entry */
+    size_t splitIndices[LDM_BATCH_SIZE];
+    ldmMatchCandidate_t matchCandidates[LDM_BATCH_SIZE];
+} ldmState_t;
+
+typedef struct {
+    ZSTD_paramSwitch_e enableLdm; /* ZSTD_ps_enable to enable LDM. ZSTD_ps_auto by default */
+    U32 hashLog;            /* Log size of hashTable */
+    U32 bucketSizeLog;      /* Log bucket size for collision resolution, at most 8 */
+    U32 minMatchLength;     /* Minimum match length */
+    U32 hashRateLog;       /* Log number of entries to skip */
+    U32 windowLog;          /* Window log for the LDM */
+} ldmParams_t;
+
+typedef struct {
+    int collectSequences;
+    ZSTD_Sequence* seqStart;
+    size_t seqIndex;
+    size_t maxSequences;
+} SeqCollector;
+
+struct ZSTD_CCtx_params_s {
+    ZSTD_format_e format;
+    ZSTD_compressionParameters cParams;
+    ZSTD_frameParameters fParams;
+
+    int compressionLevel;
+    int forceWindow;           /* force back-references to respect limit of
+                                * 1<<wLog, even for dictionary */
+    size_t targetCBlockSize;   /* Tries to fit compressed block size to be around targetCBlockSize.
+                                * No target when targetCBlockSize == 0.
+                                * There is no guarantee on compressed block size */
+    int srcSizeHint;           /* User's best guess of source size.
+                                * Hint is not valid when srcSizeHint == 0.
+                                * There is no guarantee that hint is close to actual source size */
+
+    ZSTD_dictAttachPref_e attachDictPref;
+    ZSTD_paramSwitch_e literalCompressionMode;
+
+    /* Multithreading: used to pass parameters to mtctx */
+    int nbWorkers;
+    size_t jobSize;
+    int overlapLog;
+    int rsyncable;
+
+    /* Long distance matching parameters */
+    ldmParams_t ldmParams;
+
+    /* Dedicated dict search algorithm trigger */
+    int enableDedicatedDictSearch;
+
+    /* Input/output buffer modes */
+    ZSTD_bufferMode_e inBufferMode;
+    ZSTD_bufferMode_e outBufferMode;
+
+    /* Sequence compression API */
+    ZSTD_sequenceFormat_e blockDelimiters;
+    int validateSequences;
+
+    /* Block splitting */
+    ZSTD_paramSwitch_e useBlockSplitter;
+
+    /* Param for deciding whether to use row-based matchfinder */
+    ZSTD_paramSwitch_e useRowMatchFinder;
+
+    /* Always load a dictionary in ext-dict mode (not prefix mode)? */
+    int deterministicRefPrefix;
+
+    /* Internal use, for createCCtxParams() and freeCCtxParams() only */
+    ZSTD_customMem customMem;
+
+    /* Controls prefetching in some dictMatchState matchfinders */
+    ZSTD_paramSwitch_e prefetchCDictTables;
+
+    /* Controls whether zstd will fall back to an internal matchfinder
+     * if the external matchfinder returns an error code. */
+    int enableMatchFinderFallback;
+
+    /* Parameters for the external sequence producer API.
+     * Users set these parameters through ZSTD_registerSequenceProducer().
+     * It is not possible to set these parameters individually through the public API. */
+    void* extSeqProdState;
+    ZSTD_sequenceProducer_F extSeqProdFunc;
+
+    /* Adjust the max block size*/
+    size_t maxBlockSize;
+
+    /* Controls repcode search in external sequence parsing */
+    ZSTD_paramSwitch_e searchForExternalRepcodes;
+};  /* typedef'd to ZSTD_CCtx_params within "zstd.h" */
+
+#define COMPRESS_SEQUENCES_WORKSPACE_SIZE (sizeof(unsigned) * (MaxSeq + 2))
+#define ENTROPY_WORKSPACE_SIZE (HUF_WORKSPACE_SIZE + COMPRESS_SEQUENCES_WORKSPACE_SIZE)
+
+/**
+ * Indicates whether this compression proceeds directly from user-provided
+ * source buffer to user-provided destination buffer (ZSTDb_not_buffered), or
+ * whether the context needs to buffer the input/output (ZSTDb_buffered).
+ */
+typedef enum {
+    ZSTDb_not_buffered,
+    ZSTDb_buffered
+} ZSTD_buffered_policy_e;
+
+/**
+ * Struct that contains all elements of block splitter that should be allocated
+ * in a wksp.
+ */
+#define ZSTD_MAX_NB_BLOCK_SPLITS 196
+typedef struct {
+    seqStore_t fullSeqStoreChunk;
+    seqStore_t firstHalfSeqStore;
+    seqStore_t secondHalfSeqStore;
+    seqStore_t currSeqStore;
+    seqStore_t nextSeqStore;
+
+    U32 partitions[ZSTD_MAX_NB_BLOCK_SPLITS];
+    ZSTD_entropyCTablesMetadata_t entropyMetadata;
+} ZSTD_blockSplitCtx;
+
+struct ZSTD_CCtx_s {
+    ZSTD_compressionStage_e stage;
+    int cParamsChanged;                  /* == 1 if cParams(except wlog) or compression level are changed in requestedParams. Triggers transmission of new params to ZSTDMT (if available) then reset to 0. */
+    int bmi2;                            /* == 1 if the CPU supports BMI2 and 0 otherwise. CPU support is determined dynamically once per context lifetime. */
+    ZSTD_CCtx_params requestedParams;
+    ZSTD_CCtx_params appliedParams;
+    ZSTD_CCtx_params simpleApiParams;    /* Param storage used by the simple API - not sticky. Must only be used in top-level simple API functions for storage. */
+    U32   dictID;
+    size_t dictContentSize;
+
+    ZSTD_cwksp workspace; /* manages buffer for dynamic allocations */
+    size_t blockSize;
+    unsigned long long pledgedSrcSizePlusOne;  /* this way, 0 (default) == unknown */
+    unsigned long long consumedSrcSize;
+    unsigned long long producedCSize;
+    XXH64_state_t xxhState;
+    ZSTD_customMem customMem;
+    ZSTD_threadPool* pool;
+    size_t staticSize;
+    SeqCollector seqCollector;
+    int isFirstBlock;
+    int initialized;
+
+    seqStore_t seqStore;      /* sequences storage ptrs */
+    ldmState_t ldmState;      /* long distance matching state */
+    rawSeq* ldmSequences;     /* Storage for the ldm output sequences */
+    size_t maxNbLdmSequences;
+    rawSeqStore_t externSeqStore; /* Mutable reference to external sequences */
+    ZSTD_blockState_t blockState;
+    U32* entropyWorkspace;  /* entropy workspace of ENTROPY_WORKSPACE_SIZE bytes */
+
+    /* Whether we are streaming or not */
+    ZSTD_buffered_policy_e bufferedPolicy;
+
+    /* streaming */
+    char*  inBuff;
+    size_t inBuffSize;
+    size_t inToCompress;
+    size_t inBuffPos;
+    size_t inBuffTarget;
+    char*  outBuff;
+    size_t outBuffSize;
+    size_t outBuffContentSize;
+    size_t outBuffFlushedSize;
+    ZSTD_cStreamStage streamStage;
+    U32    frameEnded;
+
+    /* Stable in/out buffer verification */
+    ZSTD_inBuffer expectedInBuffer;
+    size_t stableIn_notConsumed; /* nb bytes within stable input buffer that are said to be consumed but are not */
+    size_t expectedOutBufferSize;
+
+    /* Dictionary */
+    ZSTD_localDict localDict;
+    const ZSTD_CDict* cdict;
+    ZSTD_prefixDict prefixDict;   /* single-usage dictionary */
+
+    /* Multi-threading */
+#ifdef ZSTD_MULTITHREAD
+    ZSTDMT_CCtx* mtctx;
+#endif
+
+    /* Tracing */
+#if ZSTD_TRACE
+    ZSTD_TraceCtx traceCtx;
+#endif
+
+    /* Workspace for block splitter */
+    ZSTD_blockSplitCtx blockSplitCtx;
+
+    /* Buffer for output from external sequence producer */
+    ZSTD_Sequence* extSeqBuf;
+    size_t extSeqBufCapacity;
+};
+
+typedef enum { ZSTD_dtlm_fast, ZSTD_dtlm_full } ZSTD_dictTableLoadMethod_e;
+typedef enum { ZSTD_tfp_forCCtx, ZSTD_tfp_forCDict } ZSTD_tableFillPurpose_e;
+
+typedef enum {
+    ZSTD_noDict = 0,
+    ZSTD_extDict = 1,
+    ZSTD_dictMatchState = 2,
+    ZSTD_dedicatedDictSearch = 3
+} ZSTD_dictMode_e;
+
+typedef enum {
+    ZSTD_cpm_noAttachDict = 0,  /* Compression with ZSTD_noDict or ZSTD_extDict.
+                                 * In this mode we use both the srcSize and the dictSize
+                                 * when selecting and adjusting parameters.
+                                 */
+    ZSTD_cpm_attachDict = 1,    /* Compression with ZSTD_dictMatchState or ZSTD_dedicatedDictSearch.
+                                 * In this mode we only take the srcSize into account when selecting
+                                 * and adjusting parameters.
+                                 */
+    ZSTD_cpm_createCDict = 2,   /* Creating a CDict.
+                                 * In this mode we take both the source size and the dictionary size
+                                 * into account when selecting and adjusting the parameters.
+                                 */
+    ZSTD_cpm_unknown = 3        /* ZSTD_getCParams, ZSTD_getParams, ZSTD_adjustParams.
+                                 * We don't know what these parameters are for. We default to the legacy
+                                 * behavior of taking both the source size and the dict size into account
+                                 * when selecting and adjusting parameters.
+                                 */
+} ZSTD_cParamMode_e;
+
+typedef size_t (*ZSTD_blockCompressor) (
+        ZSTD_matchState_t* bs, seqStore_t* seqStore, U32 rep[ZSTD_REP_NUM],
+        void const* src, size_t srcSize);
+ZSTD_blockCompressor ZSTD_selectBlockCompressor(ZSTD_strategy strat, ZSTD_paramSwitch_e rowMatchfinderMode, ZSTD_dictMode_e dictMode);
+
+
+MEM_STATIC U32 ZSTD_LLcode(U32 litLength)
+{
+    static const BYTE LL_Code[64] = {  0,  1,  2,  3,  4,  5,  6,  7,
+                                       8,  9, 10, 11, 12, 13, 14, 15,
+                                      16, 16, 17, 17, 18, 18, 19, 19,
+                                      20, 20, 20, 20, 21, 21, 21, 21,
+                                      22, 22, 22, 22, 22, 22, 22, 22,
+                                      23, 23, 23, 23, 23, 23, 23, 23,
+                                      24, 24, 24, 24, 24, 24, 24, 24,
+                                      24, 24, 24, 24, 24, 24, 24, 24 };
+    static const U32 LL_deltaCode = 19;
+    return (litLength > 63) ? ZSTD_highbit32(litLength) + LL_deltaCode : LL_Code[litLength];
+}
+
+/* ZSTD_MLcode() :
+ * note : mlBase = matchLength - MINMATCH;
+ *        because it's the format it's stored in seqStore->sequences */
+MEM_STATIC U32 ZSTD_MLcode(U32 mlBase)
+{
+    static const BYTE ML_Code[128] = { 0,  1,  2,  3,  4,  5,  6,  7,  8,  9, 10, 11, 12, 13, 14, 15,
+                                      16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+                                      32, 32, 33, 33, 34, 34, 35, 35, 36, 36, 36, 36, 37, 37, 37, 37,
+                                      38, 38, 38, 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, 39, 39, 39,
+                                      40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40, 40,
+                                      41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41, 41,
+                                      42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42,
+                                      42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42, 42 };
+    static const U32 ML_deltaCode = 36;
+    return (mlBase > 127) ? ZSTD_highbit32(mlBase) + ML_deltaCode : ML_Code[mlBase];
+}
+
+/* ZSTD_cParam_withinBounds:
+ * @return 1 if value is within cParam bounds,
+ * 0 otherwise */
+MEM_STATIC int ZSTD_cParam_withinBounds(ZSTD_cParameter cParam, int value)
+{
+    ZSTD_bounds const bounds = ZSTD_cParam_getBounds(cParam);
+    if (ZSTD_isError(bounds.error)) return 0;
+    if (value < bounds.lowerBound) return 0;
+    if (value > bounds.upperBound) return 0;
+    return 1;
+}
+
+/* ZSTD_noCompressBlock() :
+ * Writes uncompressed block to dst buffer from given src.
+ * Returns the size of the block */
+MEM_STATIC size_t
+ZSTD_noCompressBlock(void* dst, size_t dstCapacity, const void* src, size_t srcSize, U32 lastBlock)
+{
+    U32 const cBlockHeader24 = lastBlock + (((U32)bt_raw)<<1) + (U32)(srcSize << 3);
+    DEBUGLOG(5, "ZSTD_noCompressBlock (srcSize=%zu, dstCapacity=%zu)", srcSize, dstCapacity);
+    RETURN_ERROR_IF(srcSize + ZSTD_blockHeaderSize > dstCapacity,
+                    dstSize_tooSmall, "dst buf too small for uncompressed block");
+    MEM_writeLE24(dst, cBlockHeader24);
+    ZSTD_memcpy((BYTE*)dst + ZSTD_blockHeaderSize, src, srcSize);
+    return ZSTD_blockHeaderSize + srcSize;
+}
+
+MEM_STATIC size_t
+ZSTD_rleCompressBlock(void* dst, size_t dstCapacity, BYTE src, size_t srcSize, U32 lastBlock)
+{
+    BYTE* const op = (BYTE*)dst;
+    U32 const cBlockHeader = lastBlock + (((U32)bt_rle)<<1) + (U32)(srcSize << 3);
+    RETURN_ERROR_IF(dstCapacity < 4, dstSize_tooSmall, "");
+    MEM_writeLE24(op, cBlockHeader);
+    op[3] = src;
+    return 4;
+}
+
+
+/* ZSTD_minGain() :
+ * minimum compression required
+ * to generate a compress block or a compressed literals section.
+ * note : use same formula for both situations */
+MEM_STATIC size_t ZSTD_minGain(size_t srcSize, ZSTD_strategy strat)
+{
+    U32 const minlog = (strat>=ZSTD_btultra) ? (U32)(strat) - 1 : 6;
+    ZSTD_STATIC_ASSERT(ZSTD_btultra == 8);
+    assert(ZSTD_cParam_withinBounds(ZSTD_c_strategy, (int)strat));
+    return (srcSize >> minlog) + 2;
+}
+
+MEM_STATIC int ZSTD_literalsCompressionIsDisabled(const ZSTD_CCtx_params* cctxParams)
+{
+    switch (cctxParams->literalCompressionMode) {
+    case ZSTD_ps_enable:
+        return 0;
+    case ZSTD_ps_disable:
+        return 1;
+    default:
+        assert(0 /* impossible: pre-validated */);
+        ZSTD_FALLTHROUGH;
+    case ZSTD_ps_auto:
+        return (cctxParams->cParams.strategy == ZSTD_fast) && (cctxParams->cParams.targetLength > 0);
+    }
+}
+
+/*! ZSTD_safecopyLiterals() :
+ *  memcpy() function that won't read beyond more than WILDCOPY_OVERLENGTH bytes past ilimit_w.
+ *  Only called when the sequence ends past ilimit_w, so it only needs to be optimized for single
+ *  large copies.
+ */
+static void
+ZSTD_safecopyLiterals(BYTE* op, BYTE const* ip, BYTE const* const iend, BYTE const* ilimit_w)
+{
+    assert(iend > ilimit_w);
+    if (ip <= ilimit_w) {
+        ZSTD_wildcopy(op, ip, ilimit_w - ip, ZSTD_no_overlap);
+        op += ilimit_w - ip;
+        ip = ilimit_w;
+    }
+    while (ip < iend) *op++ = *ip++;
+}
+
+
+#define REPCODE1_TO_OFFBASE REPCODE_TO_OFFBASE(1)
+#define REPCODE2_TO_OFFBASE REPCODE_TO_OFFBASE(2)
+#define REPCODE3_TO_OFFBASE REPCODE_TO_OFFBASE(3)
+#define REPCODE_TO_OFFBASE(r) (assert((r)>=1), assert((r)<=ZSTD_REP_NUM), (r)) /* accepts IDs 1,2,3 */
+#define OFFSET_TO_OFFBASE(o)  (assert((o)>0), o + ZSTD_REP_NUM)
+#define OFFBASE_IS_OFFSET(o)  ((o) > ZSTD_REP_NUM)
+#define OFFBASE_IS_REPCODE(o) ( 1 <= (o) && (o) <= ZSTD_REP_NUM)
+#define OFFBASE_TO_OFFSET(o)  (assert(OFFBASE_IS_OFFSET(o)), (o) - ZSTD_REP_NUM)
+#define OFFBASE_TO_REPCODE(o) (assert(OFFBASE_IS_REPCODE(o)), (o))  /* returns ID 1,2,3 */
+
+/*! ZSTD_storeSeq() :
+ *  Store a sequence (litlen, litPtr, offBase and matchLength) into seqStore_t.
+ *  @offBase : Users should employ macros REPCODE_TO_OFFBASE() and OFFSET_TO_OFFBASE().
+ *  @matchLength : must be >= MINMATCH
+ *  Allowed to over-read literals up to litLimit.
+*/
+HINT_INLINE UNUSED_ATTR void
+ZSTD_storeSeq(seqStore_t* seqStorePtr,
+              size_t litLength, const BYTE* literals, const BYTE* litLimit,
+              U32 offBase,
+              size_t matchLength)
+{
+    BYTE const* const litLimit_w = litLimit - WILDCOPY_OVERLENGTH;
+    BYTE const* const litEnd = literals + litLength;
+#if defined(DEBUGLEVEL) && (DEBUGLEVEL >= 6)
+    static const BYTE* g_start = NULL;
+    if (g_start==NULL) g_start = (const BYTE*)literals;  /* note : index only works for compression within a single segment */
+    {   U32 const pos = (U32)((const BYTE*)literals - g_start);
+        DEBUGLOG(6, "Cpos%7u :%3u literals, match%4u bytes at offBase%7u",
+               pos, (U32)litLength, (U32)matchLength, (U32)offBase);
+    }
+#endif
+    assert((size_t)(seqStorePtr->sequences - seqStorePtr->sequencesStart) < seqStorePtr->maxNbSeq);
+    /* copy Literals */
+    assert(seqStorePtr->maxNbLit <= 128 KB);
+    assert(seqStorePtr->lit + litLength <= seqStorePtr->litStart + seqStorePtr->maxNbLit);
+    assert(literals + litLength <= litLimit);
+    if (litEnd <= litLimit_w) {
+        /* Common case we can use wildcopy.
+         * First copy 16 bytes, because literals are likely short.
+         */
+        ZSTD_STATIC_ASSERT(WILDCOPY_OVERLENGTH >= 16);
+        ZSTD_copy16(seqStorePtr->lit, literals);
+        if (litLength > 16) {
+            ZSTD_wildcopy(seqStorePtr->lit+16, literals+16, (ptrdiff_t)litLength-16, ZSTD_no_overlap);
+        }
+    } else {
+        ZSTD_safecopyLiterals(seqStorePtr->lit, literals, litEnd, litLimit_w);
+    }
+    seqStorePtr->lit += litLength;
+
+    /* literal Length */
+    if (litLength>0xFFFF) {
+        assert(seqStorePtr->longLengthType == ZSTD_llt_none); /* there can only be a single long length */
+        seqStorePtr->longLengthType = ZSTD_llt_literalLength;
+        seqStorePtr->longLengthPos = (U32)(seqStorePtr->sequences - seqStorePtr->sequencesStart);
+    }
+    seqStorePtr->sequences[0].litLength = (U16)litLength;
+
+    /* match offset */
+    seqStorePtr->sequences[0].offBase = offBase;
+
+    /* match Length */
+    assert(matchLength >= MINMATCH);
+    {   size_t const mlBase = matchLength - MINMATCH;
+        if (mlBase>0xFFFF) {
+            assert(seqStorePtr->longLengthType == ZSTD_llt_none); /* there can only be a single long length */
+            seqStorePtr->longLengthType = ZSTD_llt_matchLength;
+            seqStorePtr->longLengthPos = (U32)(seqStorePtr->sequences - seqStorePtr->sequencesStart);
+        }
+        seqStorePtr->sequences[0].mlBase = (U16)mlBase;
+    }
+
+    seqStorePtr->sequences++;
+}
+
+/* ZSTD_updateRep() :
+ * updates in-place @rep (array of repeat offsets)
+ * @offBase : sum-type, using numeric representation of ZSTD_storeSeq()
+ */
+MEM_STATIC void
+ZSTD_updateRep(U32 rep[ZSTD_REP_NUM], U32 const offBase, U32 const ll0)
+{
+    if (OFFBASE_IS_OFFSET(offBase)) {  /* full offset */
+        rep[2] = rep[1];
+        rep[1] = rep[0];
+        rep[0] = OFFBASE_TO_OFFSET(offBase);
+    } else {   /* repcode */
+        U32 const repCode = OFFBASE_TO_REPCODE(offBase) - 1 + ll0;
+        if (repCode > 0) {  /* note : if repCode==0, no change */
+            U32 const currentOffset = (repCode==ZSTD_REP_NUM) ? (rep[0] - 1) : rep[repCode];
+            rep[2] = (repCode >= 2) ? rep[1] : rep[2];
+            rep[1] = rep[0];
+            rep[0] = currentOffset;
+        } else {   /* repCode == 0 */
+            /* nothing to do */
+        }
+    }
+}
+
+typedef struct repcodes_s {
+    U32 rep[3];
+} repcodes_t;
+
+MEM_STATIC repcodes_t
+ZSTD_newRep(U32 const rep[ZSTD_REP_NUM], U32 const offBase, U32 const ll0)
+{
+    repcodes_t newReps;
+    ZSTD_memcpy(&newReps, rep, sizeof(newReps));
+    ZSTD_updateRep(newReps.rep, offBase, ll0);
+    return newReps;
+}
+
+
+/*-*************************************
+*  Match length counter
+***************************************/
+MEM_STATIC size_t ZSTD_count(const BYTE* pIn, const BYTE* pMatch, const BYTE* const pInLimit)
+{
+    const BYTE* const pStart = pIn;
+    const BYTE* const pInLoopLimit = pInLimit - (sizeof(size_t)-1);
+
+    if (pIn < pInLoopLimit) {
+        { size_t const diff = MEM_readST(pMatch) ^ MEM_readST(pIn);
+          if (diff) return ZSTD_NbCommonBytes(diff); }
+        pIn+=sizeof(size_t); pMatch+=sizeof(size_t);
+        while (pIn < pInLoopLimit) {
+            size_t const diff = MEM_readST(pMatch) ^ MEM_readST(pIn);
+            if (!diff) { pIn+=sizeof(size_t); pMatch+=sizeof(size_t); continue; }
+            pIn += ZSTD_NbCommonBytes(diff);
+            return (size_t)(pIn - pStart);
+    }   }
+    if (MEM_64bits() && (pIn<(pInLimit-3)) && (MEM_read32(pMatch) == MEM_read32(pIn))) { pIn+=4; pMatch+=4; }
+    if ((pIn<(pInLimit-1)) && (MEM_read16(pMatch) == MEM_read16(pIn))) { pIn+=2; pMatch+=2; }
+    if ((pIn<pInLimit) && (*pMatch == *pIn)) pIn++;
+    return (size_t)(pIn - pStart);
+}
+
+/** ZSTD_count_2segments() :
+ *  can count match length with `ip` & `match` in 2 different segments.
+ *  convention : on reaching mEnd, match count continue starting from iStart
+ */
+MEM_STATIC size_t
+ZSTD_count_2segments(const BYTE* ip, const BYTE* match,
+                     const BYTE* iEnd, const BYTE* mEnd, const BYTE* iStart)
+{
+    const BYTE* const vEnd = MIN( ip + (mEnd - match), iEnd);
+    size_t const matchLength = ZSTD_count(ip, match, vEnd);
+    if (match + matchLength != mEnd) return matchLength;
+    DEBUGLOG(7, "ZSTD_count_2segments: found a 2-parts match (current length==%zu)", matchLength);
+    DEBUGLOG(7, "distance from match beginning to end dictionary = %zi", mEnd - match);
+    DEBUGLOG(7, "distance from current pos to end buffer = %zi", iEnd - ip);
+    DEBUGLOG(7, "next byte : ip==%02X, istart==%02X", ip[matchLength], *iStart);
+    DEBUGLOG(7, "final match length = %zu", matchLength + ZSTD_count(ip+matchLength, iStart, iEnd));
+    return matchLength + ZSTD_count(ip+matchLength, iStart, iEnd);
+}
+
+
+/*-*************************************
+ *  Hashes
+ ***************************************/
+static const U32 prime3bytes = 506832829U;
+static U32    ZSTD_hash3(U32 u, U32 h, U32 s) { assert(h <= 32); return (((u << (32-24)) * prime3bytes) ^ s)  >> (32-h) ; }
+MEM_STATIC size_t ZSTD_hash3Ptr(const void* ptr, U32 h) { return ZSTD_hash3(MEM_readLE32(ptr), h, 0); } /* only in zstd_opt.h */
+MEM_STATIC size_t ZSTD_hash3PtrS(const void* ptr, U32 h, U32 s) { return ZSTD_hash3(MEM_readLE32(ptr), h, s); }
+
+static const U32 prime4bytes = 2654435761U;
+static U32    ZSTD_hash4(U32 u, U32 h, U32 s) { assert(h <= 32); return ((u * prime4bytes) ^ s) >> (32-h) ; }
+static size_t ZSTD_hash4Ptr(const void* ptr, U32 h) { return ZSTD_hash4(MEM_readLE32(ptr), h, 0); }
+static size_t ZSTD_hash4PtrS(const void* ptr, U32 h, U32 s) { return ZSTD_hash4(MEM_readLE32(ptr), h, s); }
+
+static const U64 prime5bytes = 889523592379ULL;
+static size_t ZSTD_hash5(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u  << (64-40)) * prime5bytes) ^ s) >> (64-h)) ; }
+static size_t ZSTD_hash5Ptr(const void* p, U32 h) { return ZSTD_hash5(MEM_readLE64(p), h, 0); }
+static size_t ZSTD_hash5PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash5(MEM_readLE64(p), h, s); }
+
+static const U64 prime6bytes = 227718039650203ULL;
+static size_t ZSTD_hash6(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u  << (64-48)) * prime6bytes) ^ s) >> (64-h)) ; }
+static size_t ZSTD_hash6Ptr(const void* p, U32 h) { return ZSTD_hash6(MEM_readLE64(p), h, 0); }
+static size_t ZSTD_hash6PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash6(MEM_readLE64(p), h, s); }
+
+static const U64 prime7bytes = 58295818150454627ULL;
+static size_t ZSTD_hash7(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u  << (64-56)) * prime7bytes) ^ s) >> (64-h)) ; }
+static size_t ZSTD_hash7Ptr(const void* p, U32 h) { return ZSTD_hash7(MEM_readLE64(p), h, 0); }
+static size_t ZSTD_hash7PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash7(MEM_readLE64(p), h, s); }
+
+static const U64 prime8bytes = 0xCF1BBCDCB7A56463ULL;
+static size_t ZSTD_hash8(U64 u, U32 h, U64 s) { assert(h <= 64); return (size_t)((((u) * prime8bytes)  ^ s) >> (64-h)) ; }
+static size_t ZSTD_hash8Ptr(const void* p, U32 h) { return ZSTD_hash8(MEM_readLE64(p), h, 0); }
+static size_t ZSTD_hash8PtrS(const void* p, U32 h, U64 s) { return ZSTD_hash8(MEM_readLE64(p), h, s); }
+
+
+MEM_STATIC FORCE_INLINE_ATTR
+size_t ZSTD_hashPtr(const void* p, U32 hBits, U32 mls)
+{
+    /* Although some of these hashes do support hBits up to 64, some do not.
+     * To be on the safe side, always avoid hBits > 32. */
+    assert(hBits <= 32);
+
+    switch(mls)
+    {
+    default:
+    case 4: return ZSTD_hash4Ptr(p, hBits);
+    case 5: return ZSTD_hash5Ptr(p, hBits);
+    case 6: return ZSTD_hash6Ptr(p, hBits);
+    case 7: return ZSTD_hash7Ptr(p, hBits);
+    case 8: return ZSTD_hash8Ptr(p, hBits);
+    }
+}
+
+MEM_STATIC FORCE_INLINE_ATTR
+size_t ZSTD_hashPtrSalted(const void* p, U32 hBits, U32 mls, const U64 hashSalt) {
+    /* Although some of these hashes do support hBits up to 64, some do not.
+     * To be on the safe side, always avoid hBits > 32. */
+    assert(hBits <= 32);
+
+    switch(mls)
+    {
+        default:
+        case 4: return ZSTD_hash4PtrS(p, hBits, (U32)hashSalt);
+        case 5: return ZSTD_hash5PtrS(p, hBits, hashSalt);
+        case 6: return ZSTD_hash6PtrS(p, hBits, hashSalt);
+        case 7: return ZSTD_hash7PtrS(p, hBits, hashSalt);
+        case 8: return ZSTD_hash8PtrS(p, hBits, hashSalt);
+    }
+}
+
+
+/** ZSTD_ipow() :
+ * Return base^exponent.
+ */
+static U64 ZSTD_ipow(U64 base, U64 exponent)
+{
+    U64 power = 1;
+    while (exponent) {
+      if (exponent & 1) power *= base;
+      exponent >>= 1;
+      base *= base;
+    }
+    return power;
+}
+
+#define ZSTD_ROLL_HASH_CHAR_OFFSET 10
+
+/** ZSTD_rollingHash_append() :
+ * Add the buffer to the hash value.
+ */
+static U64 ZSTD_rollingHash_append(U64 hash, void const* buf, size_t size)
+{
+    BYTE const* istart = (BYTE const*)buf;
+    size_t pos;
+    for (pos = 0; pos < size; ++pos) {
+        hash *= prime8bytes;
+        hash += istart[pos] + ZSTD_ROLL_HASH_CHAR_OFFSET;
+    }
+    return hash;
+}
+
+/** ZSTD_rollingHash_compute() :
+ * Compute the rolling hash value of the buffer.
+ */
+MEM_STATIC U64 ZSTD_rollingHash_compute(void const* buf, size_t size)
+{
+    return ZSTD_rollingHash_append(0, buf, size);
+}
+
+/** ZSTD_rollingHash_primePower() :
+ * Compute the primePower to be passed to ZSTD_rollingHash_rotate() for a hash
+ * over a window of length bytes.
+ */
+MEM_STATIC U64 ZSTD_rollingHash_primePower(U32 length)
+{
+    return ZSTD_ipow(prime8bytes, length - 1);
+}
+
+/** ZSTD_rollingHash_rotate() :
+ * Rotate the rolling hash by one byte.
+ */
+MEM_STATIC U64 ZSTD_rollingHash_rotate(U64 hash, BYTE toRemove, BYTE toAdd, U64 primePower)
+{
+    hash -= (toRemove + ZSTD_ROLL_HASH_CHAR_OFFSET) * primePower;
+    hash *= prime8bytes;
+    hash += toAdd + ZSTD_ROLL_HASH_CHAR_OFFSET;
+    return hash;
+}
+
+/*-*************************************
+*  Round buffer management
+***************************************/
+#if (ZSTD_WINDOWLOG_MAX_64 > 31)
+# error "ZSTD_WINDOWLOG_MAX is too large : would overflow ZSTD_CURRENT_MAX"
+#endif
+/* Max current allowed */
+#define ZSTD_CURRENT_MAX ((3U << 29) + (1U << ZSTD_WINDOWLOG_MAX))
+/* Maximum chunk size before overflow correction needs to be called again */
+#define ZSTD_CHUNKSIZE_MAX                                                     \
+    ( ((U32)-1)                  /* Maximum ending current index */            \
+    - ZSTD_CURRENT_MAX)          /* Maximum beginning lowLimit */
+
+/**
+ * ZSTD_window_clear():
+ * Clears the window containing the history by simply setting it to empty.
+ */
+MEM_STATIC void ZSTD_window_clear(ZSTD_window_t* window)
+{
+    size_t const endT = (size_t)(window->nextSrc - window->base);
+    U32 const end = (U32)endT;
+
+    window->lowLimit = end;
+    window->dictLimit = end;
+}
+
+MEM_STATIC U32 ZSTD_window_isEmpty(ZSTD_window_t const window)
+{
+    return window.dictLimit == ZSTD_WINDOW_START_INDEX &&
+           window.lowLimit == ZSTD_WINDOW_START_INDEX &&
+           (window.nextSrc - window.base) == ZSTD_WINDOW_START_INDEX;
+}
+
+/**
+ * ZSTD_window_hasExtDict():
+ * Returns non-zero if the window has a non-empty extDict.
+ */
+MEM_STATIC U32 ZSTD_window_hasExtDict(ZSTD_window_t const window)
+{
+    return window.lowLimit < window.dictLimit;
+}
+
+/**
+ * ZSTD_matchState_dictMode():
+ * Inspects the provided matchState and figures out what dictMode should be
+ * passed to the compressor.
+ */
+MEM_STATIC ZSTD_dictMode_e ZSTD_matchState_dictMode(const ZSTD_matchState_t *ms)
+{
+    return ZSTD_window_hasExtDict(ms->window) ?
+        ZSTD_extDict :
+        ms->dictMatchState != NULL ?
+            (ms->dictMatchState->dedicatedDictSearch ? ZSTD_dedicatedDictSearch : ZSTD_dictMatchState) :
+            ZSTD_noDict;
+}
+
+/* Defining this macro to non-zero tells zstd to run the overflow correction
+ * code much more frequently. This is very inefficient, and should only be
+ * used for tests and fuzzers.
+ */
+#ifndef ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY
+#  ifdef FUZZING_BUILD_MODE_UNSAFE_FOR_PRODUCTION
+#    define ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY 1
+#  else
+#    define ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY 0
+#  endif
+#endif
+
+/**
+ * ZSTD_window_canOverflowCorrect():
+ * Returns non-zero if the indices are large enough for overflow correction
+ * to work correctly without impacting compression ratio.
+ */
+MEM_STATIC U32 ZSTD_window_canOverflowCorrect(ZSTD_window_t const window,
+                                              U32 cycleLog,
+                                              U32 maxDist,
+                                              U32 loadedDictEnd,
+                                              void const* src)
+{
+    U32 const cycleSize = 1u << cycleLog;
+    U32 const curr = (U32)((BYTE const*)src - window.base);
+    U32 const minIndexToOverflowCorrect = cycleSize
+                                        + MAX(maxDist, cycleSize)
+                                        + ZSTD_WINDOW_START_INDEX;
+
+    /* Adjust the min index to backoff the overflow correction frequency,
+     * so we don't waste too much CPU in overflow correction. If this
+     * computation overflows we don't really care, we just need to make
+     * sure it is at least minIndexToOverflowCorrect.
+     */
+    U32 const adjustment = window.nbOverflowCorrections + 1;
+    U32 const adjustedIndex = MAX(minIndexToOverflowCorrect * adjustment,
+                                  minIndexToOverflowCorrect);
+    U32 const indexLargeEnough = curr > adjustedIndex;
+
+    /* Only overflow correct early if the dictionary is invalidated already,
+     * so we don't hurt compression ratio.
+     */
+    U32 const dictionaryInvalidated = curr > maxDist + loadedDictEnd;
+
+    return indexLargeEnough && dictionaryInvalidated;
+}
+
+/**
+ * ZSTD_window_needOverflowCorrection():
+ * Returns non-zero if the indices are getting too large and need overflow
+ * protection.
+ */
+MEM_STATIC U32 ZSTD_window_needOverflowCorrection(ZSTD_window_t const window,
+                                                  U32 cycleLog,
+                                                  U32 maxDist,
+                                                  U32 loadedDictEnd,
+                                                  void const* src,
+                                                  void const* srcEnd)
+{
+    U32 const curr = (U32)((BYTE const*)srcEnd - window.base);
+    if (ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY) {
+        if (ZSTD_window_canOverflowCorrect(window, cycleLog, maxDist, loadedDictEnd, src)) {
+            return 1;
+        }
+    }
+    return curr > ZSTD_CURRENT_MAX;
+}
+
+/**
+ * ZSTD_window_correctOverflow():
+ * Reduces the indices to protect from index overflow.
+ * Returns the correction made to the indices, which must be applied to every
+ * stored index.
+ *
+ * The least significant cycleLog bits of the indices must remain the same,
+ * which may be 0. Every index up to maxDist in the past must be valid.
+ */
+MEM_STATIC
+ZSTD_ALLOW_POINTER_OVERFLOW_ATTR
+U32 ZSTD_window_correctOverflow(ZSTD_window_t* window, U32 cycleLog,
+                                           U32 maxDist, void const* src)
+{
+    /* preemptive overflow correction:
+     * 1. correction is large enough:
+     *    lowLimit > (3<<29) ==> current > 3<<29 + 1<<windowLog
+     *    1<<windowLog <= newCurrent < 1<<chainLog + 1<<windowLog
+     *
+     *    current - newCurrent
+     *    > (3<<29 + 1<<windowLog) - (1<<windowLog + 1<<chainLog)
+     *    > (3<<29) - (1<<chainLog)
+     *    > (3<<29) - (1<<30)             (NOTE: chainLog <= 30)
+     *    > 1<<29
+     *
+     * 2. (ip+ZSTD_CHUNKSIZE_MAX - cctx->base) doesn't overflow:
+     *    After correction, current is less than (1<<chainLog + 1<<windowLog).
+     *    In 64-bit mode we are safe, because we have 64-bit ptrdiff_t.
+     *    In 32-bit mode we are safe, because (chainLog <= 29), so
+     *    ip+ZSTD_CHUNKSIZE_MAX - cctx->base < 1<<32.
+     * 3. (cctx->lowLimit + 1<<windowLog) < 1<<32:
+     *    windowLog <= 31 ==> 3<<29 + 1<<windowLog < 7<<29 < 1<<32.
+     */
+    U32 const cycleSize = 1u << cycleLog;
+    U32 const cycleMask = cycleSize - 1;
+    U32 const curr = (U32)((BYTE const*)src - window->base);
+    U32 const currentCycle = curr & cycleMask;
+    /* Ensure newCurrent - maxDist >= ZSTD_WINDOW_START_INDEX. */
+    U32 const currentCycleCorrection = currentCycle < ZSTD_WINDOW_START_INDEX
+                                     ? MAX(cycleSize, ZSTD_WINDOW_START_INDEX)
+                                     : 0;
+    U32 const newCurrent = currentCycle
+                         + currentCycleCorrection
+                         + MAX(maxDist, cycleSize);
+    U32 const correction = curr - newCurrent;
+    /* maxDist must be a power of two so that:
+     *   (newCurrent & cycleMask) == (curr & cycleMask)
+     * This is required to not corrupt the chains / binary tree.
+     */
+    assert((maxDist & (maxDist - 1)) == 0);
+    assert((curr & cycleMask) == (newCurrent & cycleMask));
+    assert(curr > newCurrent);
+    if (!ZSTD_WINDOW_OVERFLOW_CORRECT_FREQUENTLY) {
+        /* Loose bound, should be around 1<<29 (see above) */
+        assert(correction > 1<<28);
+    }
+
+    window->base += correction;
+    window->dictBase += correction;
+    if (window->lowLimit < correction + ZSTD_WINDOW_START_INDEX) {
+        window->lowLimit = ZSTD_WINDOW_START_INDEX;
+    } else {
+        window->lowLimit -= correction;
+    }
+    if (window->dictLimit < correction + ZSTD_WINDOW_START_INDEX) {
+        window->dictLimit = ZSTD_WINDOW_START_INDEX;
+    } else {
+        window->dictLimit -= correction;
+    }
+
+    /* Ensure we can still reference the full window. */
+    assert(newCurrent >= maxDist);
+    assert(newCurrent - maxDist >= ZSTD_WINDOW_START_INDEX);
+    /* Ensure that lowLimit and dictLimit didn't underflow. */
+    assert(window->lowLimit <= newCurrent);
+    assert(window->dictLimit <= newCurrent);
+
+    ++window->nbOverflowCorrections;
+
+    DEBUGLOG(4, "Correction of 0x%x bytes to lowLimit=0x%x", correction,
+             window->lowLimit);
+    return correction;
+}
+
+/**
+ * ZSTD_window_enforceMaxDist():
+ * Updates lowLimit so that:
+ *    (srcEnd - base) - lowLimit == maxDist + loadedDictEnd
+ *
+ * It ensures index is valid as long as index >= lowLimit.
+ * This must be called before a block compression call.
+ *
+ * loadedDictEnd is only defined if a dictionary is in use for current compression.
+ * As the name implies, loadedDictEnd represents the index at end of dictionary.
+ * The value lies within context's referential, it can be directly compared to blockEndIdx.
+ *
+ * If loadedDictEndPtr is NULL, no dictionary is in use, and we use loadedDictEnd == 0.
+ * If loadedDictEndPtr is not NULL, we set it to zero after updating lowLimit.
+ * This is because dictionaries are allowed to be referenced fully
+ * as long as the last byte of the dictionary is in the window.
+ * Once input has progressed beyond window size, dictionary cannot be referenced anymore.
+ *
+ * In normal dict mode, the dictionary lies between lowLimit and dictLimit.
+ * In dictMatchState mode, lowLimit and dictLimit are the same,
+ * and the dictionary is below them.
+ * forceWindow and dictMatchState are therefore incompatible.
+ */
+MEM_STATIC void
+ZSTD_window_enforceMaxDist(ZSTD_window_t* window,
+                     const void* blockEnd,
+                           U32   maxDist,
+                           U32*  loadedDictEndPtr,
+                     const ZSTD_matchState_t** dictMatchStatePtr)
+{
+    U32 const blockEndIdx = (U32)((BYTE const*)blockEnd - window->base);
+    U32 const loadedDictEnd = (loadedDictEndPtr != NULL) ? *loadedDictEndPtr : 0;
+    DEBUGLOG(5, "ZSTD_window_enforceMaxDist: blockEndIdx=%u, maxDist=%u, loadedDictEnd=%u",
+                (unsigned)blockEndIdx, (unsigned)maxDist, (unsigned)loadedDictEnd);
+
+    /* - When there is no dictionary : loadedDictEnd == 0.
+         In which case, the test (blockEndIdx > maxDist) is merely to avoid
+         overflowing next operation `newLowLimit = blockEndIdx - maxDist`.
+       - When there is a standard dictionary :
+         Index referential is copied from the dictionary,
+         which means it starts from 0.
+         In which case, loadedDictEnd == dictSize,
+         and it makes sense to compare `blockEndIdx > maxDist + dictSize`
+         since `blockEndIdx` also starts from zero.
+       - When there is an attached dictionary :
+         loadedDictEnd is expressed within the referential of the context,
+         so it can be directly compared against blockEndIdx.
+    */
+    if (blockEndIdx > maxDist + loadedDictEnd) {
+        U32 const newLowLimit = blockEndIdx - maxDist;
+        if (window->lowLimit < newLowLimit) window->lowLimit = newLowLimit;
+        if (window->dictLimit < window->lowLimit) {
+            DEBUGLOG(5, "Update dictLimit to match lowLimit, from %u to %u",
+                        (unsigned)window->dictLimit, (unsigned)window->lowLimit);
+            window->dictLimit = window->lowLimit;
+        }
+        /* On reaching window size, dictionaries are invalidated */
+        if (loadedDictEndPtr) *loadedDictEndPtr = 0;
+        if (dictMatchStatePtr) *dictMatchStatePtr = NULL;
+    }
+}
+
+/* Similar to ZSTD_window_enforceMaxDist(),
+ * but only invalidates dictionary
+ * when input progresses beyond window size.
+ * assumption : loadedDictEndPtr and dictMatchStatePtr are valid (non NULL)
+ *              loadedDictEnd uses same referential as window->base
+ *              maxDist is the window size */
+MEM_STATIC void
+ZSTD_checkDictValidity(const ZSTD_window_t* window,
+                       const void* blockEnd,
+                             U32   maxDist,
+                             U32*  loadedDictEndPtr,
+                       const ZSTD_matchState_t** dictMatchStatePtr)
+{
+    assert(loadedDictEndPtr != NULL);
+    assert(dictMatchStatePtr != NULL);
+    {   U32 const blockEndIdx = (U32)((BYTE const*)blockEnd - window->base);
+        U32 const loadedDictEnd = *loadedDictEndPtr;
+        DEBUGLOG(5, "ZSTD_checkDictValidity: blockEndIdx=%u, maxDist=%u, loadedDictEnd=%u",
+                    (unsigned)blockEndIdx, (unsigned)maxDist, (unsigned)loadedDictEnd);
+        assert(blockEndIdx >= loadedDictEnd);
+
+        if (blockEndIdx > loadedDictEnd + maxDist || loadedDictEnd != window->dictLimit) {
+            /* On reaching window size, dictionaries are invalidated.
+             * For simplification, if window size is reached anywhere within next block,
+             * the dictionary is invalidated for the full block.
+             *
+             * We also have to invalidate the dictionary if ZSTD_window_update() has detected
+             * non-contiguous segments, which means that loadedDictEnd != window->dictLimit.
+             * loadedDictEnd may be 0, if forceWindow is true, but in that case we never use
+             * dictMatchState, so setting it to NULL is not a problem.
+             */
+            DEBUGLOG(6, "invalidating dictionary for current block (distance > windowSize)");
+            *loadedDictEndPtr = 0;
+            *dictMatchStatePtr = NULL;
+        } else {
+            if (*loadedDictEndPtr != 0) {
+                DEBUGLOG(6, "dictionary considered valid for current block");
+    }   }   }
+}
+
+MEM_STATIC void ZSTD_window_init(ZSTD_window_t* window) {
+    ZSTD_memset(window, 0, sizeof(*window));
+    window->base = (BYTE const*)" ";
+    window->dictBase = (BYTE const*)" ";
+    ZSTD_STATIC_ASSERT(ZSTD_DUBT_UNSORTED_MARK < ZSTD_WINDOW_START_INDEX); /* Start above ZSTD_DUBT_UNSORTED_MARK */
+    window->dictLimit = ZSTD_WINDOW_START_INDEX;    /* start from >0, so that 1st position is valid */
+    window->lowLimit = ZSTD_WINDOW_START_INDEX;     /* it ensures first and later CCtx usages compress the same */
+    window->nextSrc = window->base + ZSTD_WINDOW_START_INDEX;   /* see issue #1241 */
+    window->nbOverflowCorrections = 0;
+}
+
+/**
+ * ZSTD_window_update():
+ * Updates the window by appending [src, src + srcSize) to the window.
+ * If it is not contiguous, the current prefix becomes the extDict, and we
+ * forget about the extDict. Handles overlap of the prefix and extDict.
+ * Returns non-zero if the segment is contiguous.
+ */
+MEM_STATIC
+ZSTD_ALLOW_POINTER_OVERFLOW_ATTR
+U32 ZSTD_window_update(ZSTD_window_t* window,
+                                  void const* src, size_t srcSize,
+                                  int forceNonContiguous)
+{
+    BYTE const* const ip = (BYTE const*)src;
+    U32 contiguous = 1;
+    DEBUGLOG(5, "ZSTD_window_update");
+    if (srcSize == 0)
+        return contiguous;
+    assert(window->base != NULL);
+    assert(window->dictBase != NULL);
+    /* Check if blocks follow each other */
+    if (src != window->nextSrc || forceNonContiguous) {
+        /* not contiguous */
+        size_t const distanceFromBase = (size_t)(window->nextSrc - window->base);
+        DEBUGLOG(5, "Non contiguous blocks, new segment starts at %u", window->dictLimit);
+        window->lowLimit = window->dictLimit;
+        assert(distanceFromBase == (size_t)(U32)distanceFromBase);  /* should never overflow */
+        window->dictLimit = (U32)distanceFromBase;
+        window->dictBase = window->base;
+        window->base = ip - distanceFromBase;
+        /* ms->nextToUpdate = window->dictLimit; */
+        if (window->dictLimit - window->lowLimit < HASH_READ_SIZE) window->lowLimit = window->dictLimit;   /* too small extDict */
+        contiguous = 0;
+    }
+    window->nextSrc = ip + srcSize;
+    /* if input and dictionary overlap : reduce dictionary (area presumed modified by input) */
+    if ( (ip+srcSize > window->dictBase + window->lowLimit)
+       & (ip < window->dictBase + window->dictLimit)) {
+        ptrdiff_t const highInputIdx = (ip + srcSize) - window->dictBase;
+        U32 const lowLimitMax = (highInputIdx > (ptrdiff_t)window->dictLimit) ? window->dictLimit : (U32)highInputIdx;
+        window->lowLimit = lowLimitMax;
+        DEBUGLOG(5, "Overlapping extDict and input : new lowLimit = %u", window->lowLimit);
+    }
+    return contiguous;
+}
+
+/**
+ * Returns the lowest allowed match index. It may either be in the ext-dict or the prefix.
+ */
+MEM_STATIC U32 ZSTD_getLowestMatchIndex(const ZSTD_matchState_t* ms, U32 curr, unsigned windowLog)
+{
+    U32 const maxDistance = 1U << windowLog;
+    U32 const lowestValid = ms->window.lowLimit;
+    U32 const withinWindow = (curr - lowestValid > maxDistance) ? curr - maxDistance : lowestValid;
+    U32 const isDictionary = (ms->loadedDictEnd != 0);
+    /* When using a dictionary the entire dictionary is valid if a single byte of the dictionary
+     * is within the window. We invalidate the dictionary (and set loadedDictEnd to 0) when it isn't
+     * valid for the entire block. So this check is sufficient to find the lowest valid match index.
+     */
+    U32 const matchLowest = isDictionary ? lowestValid : withinWindow;
+    return matchLowest;
+}
+
+/**
+ * Returns the lowest allowed match index in the prefix.
+ */
+MEM_STATIC U32 ZSTD_getLowestPrefixIndex(const ZSTD_matchState_t* ms, U32 curr, unsigned windowLog)
+{
+    U32    const maxDistance = 1U << windowLog;
+    U32    const lowestValid = ms->window.dictLimit;
+    U32    const withinWindow = (curr - lowestValid > maxDistance) ? curr - maxDistance : lowestValid;
+    U32    const isDictionary = (ms->loadedDictEnd != 0);
+    /* When computing the lowest prefix index we need to take the dictionary into account to handle
+     * the edge case where the dictionary and the source are contiguous in memory.
+     */
+    U32    const matchLowest = isDictionary ? lowestValid : withinWindow;
+    return matchLowest;
+}
+
+
+
+/* debug functions */
+#if (DEBUGLEVEL>=2)
+
+MEM_STATIC double ZSTD_fWeight(U32 rawStat)
+{
+    U32 const fp_accuracy = 8;
+    U32 const fp_multiplier = (1 << fp_accuracy);
+    U32 const newStat = rawStat + 1;
+    U32 const hb = ZSTD_highbit32(newStat);
+    U32 const BWeight = hb * fp_multiplier;
+    U32 const FWeight = (newStat << fp_accuracy) >> hb;
+    U32 const weight = BWeight + FWeight;
+    assert(hb + fp_accuracy < 31);
+    return (double)weight / fp_multiplier;
+}
+
+/* display a table content,
+ * listing each element, its frequency, and its predicted bit cost */
+MEM_STATIC void ZSTD_debugTable(const U32* table, U32 max)
+{
+    unsigned u, sum;
+    for (u=0, sum=0; u<=max; u++) sum += table[u];
+    DEBUGLOG(2, "total nb elts: %u", sum);
+    for (u=0; u<=max; u++) {
+        DEBUGLOG(2, "%2u: %5u  (%.2f)",
+                u, table[u], ZSTD_fWeight(sum) - ZSTD_fWeight(table[u]) );
+    }
+}
+
+#endif
+
+/* Short Cache */
+
+/* Normally, zstd matchfinders follow this flow:
+ *     1. Compute hash at ip
+ *     2. Load index from hashTable[hash]
+ *     3. Check if *ip == *(base + index)
+ * In dictionary compression, loading *(base + index) is often an L2 or even L3 miss.
+ *
+ * Short cache is an optimization which allows us to avoid step 3 most of the time
+ * when the data doesn't actually match. With short cache, the flow becomes:
+ *     1. Compute (hash, currentTag) at ip. currentTag is an 8-bit independent hash at ip.
+ *     2. Load (index, matchTag) from hashTable[hash]. See ZSTD_writeTaggedIndex to understand how this works.
+ *     3. Only if currentTag == matchTag, check *ip == *(base + index). Otherwise, continue.
+ *
+ * Currently, short cache is only implemented in CDict hashtables. Thus, its use is limited to
+ * dictMatchState matchfinders.
+ */
+#define ZSTD_SHORT_CACHE_TAG_BITS 8
+#define ZSTD_SHORT_CACHE_TAG_MASK ((1u << ZSTD_SHORT_CACHE_TAG_BITS) - 1)
+
+/* Helper function for ZSTD_fillHashTable and ZSTD_fillDoubleHashTable.
+ * Unpacks hashAndTag into (hash, tag), then packs (index, tag) into hashTable[hash]. */
+MEM_STATIC void ZSTD_writeTaggedIndex(U32* const hashTable, size_t hashAndTag, U32 index) {
+    size_t const hash = hashAndTag >> ZSTD_SHORT_CACHE_TAG_BITS;
+    U32 const tag = (U32)(hashAndTag & ZSTD_SHORT_CACHE_TAG_MASK);
+    assert(index >> (32 - ZSTD_SHORT_CACHE_TAG_BITS) == 0);
+    hashTable[hash] = (index << ZSTD_SHORT_CACHE_TAG_BITS) | tag;
+}
+
+/* Helper function for short cache matchfinders.
+ * Unpacks tag1 and tag2 from lower bits of packedTag1 and packedTag2, then checks if the tags match. */
+MEM_STATIC int ZSTD_comparePackedTags(size_t packedTag1, size_t packedTag2) {
+    U32 const tag1 = packedTag1 & ZSTD_SHORT_CACHE_TAG_MASK;
+    U32 const tag2 = packedTag2 & ZSTD_SHORT_CACHE_TAG_MASK;
+    return tag1 == tag2;
+}
+
+#if defined (__cplusplus)
+}
+#endif
+
+/* ===============================================================
+ * Shared internal declarations
+ * These prototypes may be called from sources not in lib/compress
+ * =============================================================== */
+
+/* ZSTD_loadCEntropy() :
+ * dict : must point at beginning of a valid zstd dictionary.
+ * return : size of dictionary header (size of magic number + dict ID + entropy tables)
+ * assumptions : magic number supposed already checked
+ *               and dictSize >= 8 */
+size_t ZSTD_loadCEntropy(ZSTD_compressedBlockState_t* bs, void* workspace,
+                         const void* const dict, size_t dictSize);
+
+void ZSTD_reset_compressedBlockState(ZSTD_compressedBlockState_t* bs);
+
+/* ==============================================================
+ * Private declarations
+ * These prototypes shall only be called from within lib/compress
+ * ============================================================== */
+
+/* ZSTD_getCParamsFromCCtxParams() :
+ * cParams are built depending on compressionLevel, src size hints,
+ * LDM and manually set compression parameters.
+ * Note: srcSizeHint == 0 means 0!
+ */
+ZSTD_compressionParameters ZSTD_getCParamsFromCCtxParams(
+        const ZSTD_CCtx_params* CCtxParams, U64 srcSizeHint, size_t dictSize, ZSTD_cParamMode_e mode);
+
+/*! ZSTD_initCStream_internal() :
+ *  Private use only. Init streaming operation.
+ *  expects params to be valid.
+ *  must receive dict, or cdict, or none, but not both.
+ *  @return : 0, or an error code */
+size_t ZSTD_initCStream_internal(ZSTD_CStream* zcs,
+                     const void* dict, size_t dictSize,
+                     const ZSTD_CDict* cdict,
+                     const ZSTD_CCtx_params* params, unsigned long long pledgedSrcSize);
+
+void ZSTD_resetSeqStore(seqStore_t* ssPtr);
+
+/*! ZSTD_getCParamsFromCDict() :
+ *  as the name implies */
+ZSTD_compressionParameters ZSTD_getCParamsFromCDict(const ZSTD_CDict* cdict);
+
+/* ZSTD_compressBegin_advanced_internal() :
+ * Private use only. To be called from zstdmt_compress.c. */
+size_t ZSTD_compressBegin_advanced_internal(ZSTD_CCtx* cctx,
+                                    const void* dict, size_t dictSize,
+                                    ZSTD_dictContentType_e dictContentType,
+                                    ZSTD_dictTableLoadMethod_e dtlm,
+                                    const ZSTD_CDict* cdict,
+                                    const ZSTD_CCtx_params* params,
+                                    unsigned long long pledgedSrcSize);
+
+/* ZSTD_compress_advanced_internal() :
+ * Private use only. To be called from zstdmt_compress.c. */
+size_t ZSTD_compress_advanced_internal(ZSTD_CCtx* cctx,
+                                       void* dst, size_t dstCapacity,
+                                 const void* src, size_t srcSize,
+                                 const void* dict,size_t dictSize,
+                                 const ZSTD_CCtx_params* params);
+
+
+/* ZSTD_writeLastEmptyBlock() :
+ * output an empty Block with end-of-frame mark to complete a frame
+ * @return : size of data written into `dst` (== ZSTD_blockHeaderSize (defined in zstd_internal.h))
+ *           or an error code if `dstCapacity` is too small (<ZSTD_blockHeaderSize)
+ */
+size_t ZSTD_writeLastEmptyBlock(void* dst, size_t dstCapacity);
+
+
+/* ZSTD_referenceExternalSequences() :
+ * Must be called before starting a compression operation.
+ * seqs must parse a prefix of the source.
+ * This cannot be used when long range matching is enabled.
+ * Zstd will use these sequences, and pass the literals to a secondary block
+ * compressor.
+ * NOTE: seqs are not verified! Invalid sequences can cause out-of-bounds memory
+ * access and data corruption.
+ */
+void ZSTD_referenceExternalSequences(ZSTD_CCtx* cctx, rawSeq* seq, size_t nbSeq);
+
+/** ZSTD_cycleLog() :
+ *  condition for correct operation : hashLog > 1 */
+U32 ZSTD_cycleLog(U32 hashLog, ZSTD_strategy strat);
+
+/** ZSTD_CCtx_trace() :
+ *  Trace the end of a compression call.
+ */
+void ZSTD_CCtx_trace(ZSTD_CCtx* cctx, size_t extraCSize);
+
+/* Returns 0 on success, and a ZSTD_error otherwise. This function scans through an array of
+ * ZSTD_Sequence, storing the sequences it finds, until it reaches a block delimiter.
+ * Note that the block delimiter must include the last literals of the block.
+ */
+size_t
+ZSTD_copySequencesToSeqStoreExplicitBlockDelim(ZSTD_CCtx* cctx,
+                                              ZSTD_sequencePosition* seqPos,
+                                        const ZSTD_Sequence* const inSeqs, size_t inSeqsSize,
+                                        const void* src, size_t blockSize, ZSTD_paramSwitch_e externalRepSearch);
+
+/* Returns the number of bytes to move the current read position back by.
+ * Only non-zero if we ended up splitting a sequence.
+ * Otherwise, it may return a ZSTD error if something went wrong.
+ *
+ * This function will attempt to scan through blockSize bytes
+ * represented by the sequences in @inSeqs,
+ * storing any (partial) sequences.
+ *
+ * Occasionally, we may want to change the actual number of bytes we consumed from inSeqs to
+ * avoid splitting a match, or to avoid splitting a match such that it would produce a match
+ * smaller than MINMATCH. In this case, we return the number of bytes that we didn't read from this block.
+ */
+size_t
+ZSTD_copySequencesToSeqStoreNoBlockDelim(ZSTD_CCtx* cctx, ZSTD_sequencePosition* seqPos,
+                                   const ZSTD_Sequence* const inSeqs, size_t inSeqsSize,
+                                   const void* src, size_t blockSize, ZSTD_paramSwitch_e externalRepSearch);
+
+/* Returns 1 if an external sequence producer is registered, otherwise returns 0. */
+MEM_STATIC int ZSTD_hasExtSeqProd(const ZSTD_CCtx_params* params) {
+    return params->extSeqProdFunc != NULL;
+}
+
+/* ===============================================================
+ * Deprecated definitions that are still used internally to avoid
+ * deprecation warnings. These functions are exactly equivalent to
+ * their public variants, but avoid the deprecation warnings.
+ * =============================================================== */
+
+size_t ZSTD_compressBegin_usingCDict_deprecated(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
+
+size_t ZSTD_compressContinue_public(ZSTD_CCtx* cctx,
+                                    void* dst, size_t dstCapacity,
+                              const void* src, size_t srcSize);
+
+size_t ZSTD_compressEnd_public(ZSTD_CCtx* cctx,
+                               void* dst, size_t dstCapacity,
+                         const void* src, size_t srcSize);
+
+size_t ZSTD_compressBlock_deprecated(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+
+#endif /* ZSTD_COMPRESS_H */