zstdlib 0.13.0-x86_64-linux

data/ext/zstdlib_c/zlib-1.3.1/gzwrite.c

@@ -0,0 +1,631 @@
+/* gzwrite.c -- zlib functions for writing gzip files
+ * Copyright (C) 2004-2019 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "gzguts.h"
+
+/* Initialize state for writing a gzip file.  Mark initialization by setting
+   state->size to non-zero.  Return -1 on a memory allocation failure, or 0 on
+   success. */
+local int gz_init(gz_statep state) {
+    int ret;
+    z_streamp strm = &(state->strm);
+
+    /* allocate input buffer (double size for gzprintf) */
+    state->in = (unsigned char *)malloc(state->want << 1);
+    if (state->in == NULL) {
+        gz_error(state, Z_MEM_ERROR, "out of memory");
+        return -1;
+    }
+
+    /* only need output buffer and deflate state if compressing */
+    if (!state->direct) {
+        /* allocate output buffer */
+        state->out = (unsigned char *)malloc(state->want);
+        if (state->out == NULL) {
+            free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+
+        /* allocate deflate memory, set up for gzip compression */
+        strm->zalloc = Z_NULL;
+        strm->zfree = Z_NULL;
+        strm->opaque = Z_NULL;
+        ret = deflateInit2(strm, state->level, Z_DEFLATED,
+                           MAX_WBITS + 16, DEF_MEM_LEVEL, state->strategy);
+        if (ret != Z_OK) {
+            free(state->out);
+            free(state->in);
+            gz_error(state, Z_MEM_ERROR, "out of memory");
+            return -1;
+        }
+        strm->next_in = NULL;
+    }
+
+    /* mark state as initialized */
+    state->size = state->want;
+
+    /* initialize write buffer if compressing */
+    if (!state->direct) {
+        strm->avail_out = state->size;
+        strm->next_out = state->out;
+        state->x.next = strm->next_out;
+    }
+    return 0;
+}
+
+/* Compress whatever is at avail_in and next_in and write to the output file.
+   Return -1 if there is an error writing to the output file or if gz_init()
+   fails to allocate memory, otherwise 0.  flush is assumed to be a valid
+   deflate() flush value.  If flush is Z_FINISH, then the deflate() state is
+   reset to start a new gzip stream.  If gz->direct is true, then simply write
+   to the output file without compressing, and ignore flush. */
+local int gz_comp(gz_statep state, int flush) {
+    int ret, writ;
+    unsigned have, put, max = ((unsigned)-1 >> 2) + 1;
+    z_streamp strm = &(state->strm);
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return -1;
+
+    /* write directly if requested */
+    if (state->direct) {
+        while (strm->avail_in) {
+            put = strm->avail_in > max ? max : strm->avail_in;
+            writ = write(state->fd, strm->next_in, put);
+            if (writ < 0) {
+                gz_error(state, Z_ERRNO, zstrerror());
+                return -1;
+            }
+            strm->avail_in -= (unsigned)writ;
+            strm->next_in += writ;
+        }
+        return 0;
+    }
+
+    /* check for a pending reset */
+    if (state->reset) {
+        /* don't start a new gzip member unless there is data to write */
+        if (strm->avail_in == 0)
+            return 0;
+        deflateReset(strm);
+        state->reset = 0;
+    }
+
+    /* run deflate() on provided input until it produces no more output */
+    ret = Z_OK;
+    do {
+        /* write out current buffer contents if full, or if flushing, but if
+           doing Z_FINISH then don't write until we get to Z_STREAM_END */
+        if (strm->avail_out == 0 || (flush != Z_NO_FLUSH &&
+            (flush != Z_FINISH || ret == Z_STREAM_END))) {
+            while (strm->next_out > state->x.next) {
+                put = strm->next_out - state->x.next > (int)max ? max :
+                      (unsigned)(strm->next_out - state->x.next);
+                writ = write(state->fd, state->x.next, put);
+                if (writ < 0) {
+                    gz_error(state, Z_ERRNO, zstrerror());
+                    return -1;
+                }
+                state->x.next += writ;
+            }
+            if (strm->avail_out == 0) {
+                strm->avail_out = state->size;
+                strm->next_out = state->out;
+                state->x.next = state->out;
+            }
+        }
+
+        /* compress */
+        have = strm->avail_out;
+        ret = deflate(strm, flush);
+        if (ret == Z_STREAM_ERROR) {
+            gz_error(state, Z_STREAM_ERROR,
+                      "internal error: deflate stream corrupt");
+            return -1;
+        }
+        have -= strm->avail_out;
+    } while (have);
+
+    /* if that completed a deflate stream, allow another to start */
+    if (flush == Z_FINISH)
+        state->reset = 1;
+
+    /* all done, no errors */
+    return 0;
+}
+
+/* Compress len zeros to output.  Return -1 on a write error or memory
+   allocation failure by gz_comp(), or 0 on success. */
+local int gz_zero(gz_statep state, z_off64_t len) {
+    int first;
+    unsigned n;
+    z_streamp strm = &(state->strm);
+
+    /* consume whatever's left in the input buffer */
+    if (strm->avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+        return -1;
+
+    /* compress len zeros (len guaranteed > 0) */
+    first = 1;
+    while (len) {
+        n = GT_OFF(state->size) || (z_off64_t)state->size > len ?
+            (unsigned)len : state->size;
+        if (first) {
+            memset(state->in, 0, n);
+            first = 0;
+        }
+        strm->avail_in = n;
+        strm->next_in = state->in;
+        state->x.pos += n;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return -1;
+        len -= n;
+    }
+    return 0;
+}
+
+/* Write len bytes from buf to file.  Return the number of bytes written.  If
+   the returned value is less than len, then there was an error. */
+local z_size_t gz_write(gz_statep state, voidpc buf, z_size_t len) {
+    z_size_t put = len;
+
+    /* if len is zero, avoid unnecessary operations */
+    if (len == 0)
+        return 0;
+
+    /* allocate memory if this is the first time through */
+    if (state->size == 0 && gz_init(state) == -1)
+        return 0;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return 0;
+    }
+
+    /* for small len, copy to input buffer, otherwise compress directly */
+    if (len < state->size) {
+        /* copy to input buffer, compress when full */
+        do {
+            unsigned have, copy;
+
+            if (state->strm.avail_in == 0)
+                state->strm.next_in = state->in;
+            have = (unsigned)((state->strm.next_in + state->strm.avail_in) -
+                              state->in);
+            copy = state->size - have;
+            if (copy > len)
+                copy = (unsigned)len;
+            memcpy(state->in + have, buf, copy);
+            state->strm.avail_in += copy;
+            state->x.pos += copy;
+            buf = (const char *)buf + copy;
+            len -= copy;
+            if (len && gz_comp(state, Z_NO_FLUSH) == -1)
+                return 0;
+        } while (len);
+    }
+    else {
+        /* consume whatever's left in the input buffer */
+        if (state->strm.avail_in && gz_comp(state, Z_NO_FLUSH) == -1)
+            return 0;
+
+        /* directly compress user buffer to file */
+        state->strm.next_in = (z_const Bytef *)buf;
+        do {
+            unsigned n = (unsigned)-1;
+            if (n > len)
+                n = (unsigned)len;
+            state->strm.avail_in = n;
+            state->x.pos += n;
+            if (gz_comp(state, Z_NO_FLUSH) == -1)
+                return 0;
+            len -= n;
+        } while (len);
+    }
+
+    /* input was all buffered or compressed */
+    return put;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzwrite(gzFile file, voidpc buf, unsigned len) {
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* since an int is returned, make sure len fits in one, otherwise return
+       with an error (this avoids a flaw in the interface) */
+    if ((int)len < 0) {
+        gz_error(state, Z_DATA_ERROR, "requested length does not fit in int");
+        return 0;
+    }
+
+    /* write len bytes from buf (the return value will fit in an int) */
+    return (int)gz_write(state, buf, len);
+}
+
+/* -- see zlib.h -- */
+z_size_t ZEXPORT gzfwrite(voidpc buf, z_size_t size, z_size_t nitems,
+                          gzFile file) {
+    z_size_t len;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return 0;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return 0;
+
+    /* compute bytes to read -- error on overflow */
+    len = nitems * size;
+    if (size && len / size != nitems) {
+        gz_error(state, Z_STREAM_ERROR, "request does not fit in a size_t");
+        return 0;
+    }
+
+    /* write len bytes to buf, return the number of full items written */
+    return len ? gz_write(state, buf, len) / size : 0;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputc(gzFile file, int c) {
+    unsigned have;
+    unsigned char buf[1];
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return -1;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return -1;
+    }
+
+    /* try writing to input buffer for speed (state->size == 0 if buffer not
+       initialized) */
+    if (state->size) {
+        if (strm->avail_in == 0)
+            strm->next_in = state->in;
+        have = (unsigned)((strm->next_in + strm->avail_in) - state->in);
+        if (have < state->size) {
+            state->in[have] = (unsigned char)c;
+            strm->avail_in++;
+            state->x.pos++;
+            return c & 0xff;
+        }
+    }
+
+    /* no room in buffer or not initialized, use gz_write() */
+    buf[0] = (unsigned char)c;
+    if (gz_write(state, buf, 1) != 1)
+        return -1;
+    return c & 0xff;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzputs(gzFile file, const char *s) {
+    z_size_t len, put;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return -1;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return -1;
+
+    /* write string */
+    len = strlen(s);
+    if ((int)len < 0 || (unsigned)len != len) {
+        gz_error(state, Z_STREAM_ERROR, "string length does not fit in int");
+        return -1;
+    }
+    put = gz_write(state, s, len);
+    return put < len ? -1 : (int)len;
+}
+
+#if defined(STDC) || defined(Z_HAVE_STDARG_H)
+#include <stdarg.h>
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzvprintf(gzFile file, const char *format, va_list va) {
+    int len;
+    unsigned left;
+    char *next;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return state->err;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return state->err;
+    }
+
+    /* do the printf() into the input buffer, put length in len -- the input
+       buffer is double-sized just for this function, so there is guaranteed to
+       be state->size bytes available after the current contents */
+    if (strm->avail_in == 0)
+        strm->next_in = state->in;
+    next = (char *)(state->in + (strm->next_in - state->in) + strm->avail_in);
+    next[state->size - 1] = 0;
+#ifdef NO_vsnprintf
+#  ifdef HAS_vsprintf_void
+    (void)vsprintf(next, format, va);
+    for (len = 0; len < state->size; len++)
+        if (next[len] == 0) break;
+#  else
+    len = vsprintf(next, format, va);
+#  endif
+#else
+#  ifdef HAS_vsnprintf_void
+    (void)vsnprintf(next, state->size, format, va);
+    len = strlen(next);
+#  else
+    len = vsnprintf(next, state->size, format, va);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len == 0 || (unsigned)len >= state->size || next[state->size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, compress first half if past that */
+    strm->avail_in += (unsigned)len;
+    state->x.pos += len;
+    if (strm->avail_in >= state->size) {
+        left = strm->avail_in - state->size;
+        strm->avail_in = state->size;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return state->err;
+        memmove(state->in, state->in + state->size, left);
+        strm->next_in = state->in;
+        strm->avail_in = left;
+    }
+    return len;
+}
+
+int ZEXPORTVA gzprintf(gzFile file, const char *format, ...) {
+    va_list va;
+    int ret;
+
+    va_start(va, format);
+    ret = gzvprintf(file, format, va);
+    va_end(va);
+    return ret;
+}
+
+#else /* !STDC && !Z_HAVE_STDARG_H */
+
+/* -- see zlib.h -- */
+int ZEXPORTVA gzprintf(gzFile file, const char *format, int a1, int a2, int a3,
+                       int a4, int a5, int a6, int a7, int a8, int a9, int a10,
+                       int a11, int a12, int a13, int a14, int a15, int a16,
+                       int a17, int a18, int a19, int a20) {
+    unsigned len, left;
+    char *next;
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that can really pass pointer in ints */
+    if (sizeof(int) != sizeof(void *))
+        return Z_STREAM_ERROR;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* make sure we have some buffer space */
+    if (state->size == 0 && gz_init(state) == -1)
+        return state->error;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return state->error;
+    }
+
+    /* do the printf() into the input buffer, put length in len -- the input
+       buffer is double-sized just for this function, so there is guaranteed to
+       be state->size bytes available after the current contents */
+    if (strm->avail_in == 0)
+        strm->next_in = state->in;
+    next = (char *)(strm->next_in + strm->avail_in);
+    next[state->size - 1] = 0;
+#ifdef NO_snprintf
+#  ifdef HAS_sprintf_void
+    sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11, a12,
+            a13, a14, a15, a16, a17, a18, a19, a20);
+    for (len = 0; len < size; len++)
+        if (next[len] == 0)
+            break;
+#  else
+    len = sprintf(next, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10, a11,
+                  a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#else
+#  ifdef HAS_snprintf_void
+    snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8, a9,
+             a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+    len = strlen(next);
+#  else
+    len = snprintf(next, state->size, format, a1, a2, a3, a4, a5, a6, a7, a8,
+                   a9, a10, a11, a12, a13, a14, a15, a16, a17, a18, a19, a20);
+#  endif
+#endif
+
+    /* check that printf() results fit in buffer */
+    if (len == 0 || len >= state->size || next[state->size - 1] != 0)
+        return 0;
+
+    /* update buffer and position, compress first half if past that */
+    strm->avail_in += len;
+    state->x.pos += len;
+    if (strm->avail_in >= state->size) {
+        left = strm->avail_in - state->size;
+        strm->avail_in = state->size;
+        if (gz_comp(state, Z_NO_FLUSH) == -1)
+            return state->err;
+        memmove(state->in, state->in + state->size, left);
+        strm->next_in = state->in;
+        strm->avail_in = left;
+    }
+    return (int)len;
+}
+
+#endif
+
+/* -- see zlib.h -- */
+int ZEXPORT gzflush(gzFile file, int flush) {
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK)
+        return Z_STREAM_ERROR;
+
+    /* check flush parameter */
+    if (flush < 0 || flush > Z_FINISH)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return state->err;
+    }
+
+    /* compress remaining data with requested flush */
+    (void)gz_comp(state, flush);
+    return state->err;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzsetparams(gzFile file, int level, int strategy) {
+    gz_statep state;
+    z_streamp strm;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+    strm = &(state->strm);
+
+    /* check that we're writing and that there's no error */
+    if (state->mode != GZ_WRITE || state->err != Z_OK || state->direct)
+        return Z_STREAM_ERROR;
+
+    /* if no change is requested, then do nothing */
+    if (level == state->level && strategy == state->strategy)
+        return Z_OK;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            return state->err;
+    }
+
+    /* change compression parameters for subsequent input */
+    if (state->size) {
+        /* flush previous input with previous parameters before changing */
+        if (strm->avail_in && gz_comp(state, Z_BLOCK) == -1)
+            return state->err;
+        deflateParams(strm, level, strategy);
+    }
+    state->level = level;
+    state->strategy = strategy;
+    return Z_OK;
+}
+
+/* -- see zlib.h -- */
+int ZEXPORT gzclose_w(gzFile file) {
+    int ret = Z_OK;
+    gz_statep state;
+
+    /* get internal structure */
+    if (file == NULL)
+        return Z_STREAM_ERROR;
+    state = (gz_statep)file;
+
+    /* check that we're writing */
+    if (state->mode != GZ_WRITE)
+        return Z_STREAM_ERROR;
+
+    /* check for seek request */
+    if (state->seek) {
+        state->seek = 0;
+        if (gz_zero(state, state->skip) == -1)
+            ret = state->err;
+    }
+
+    /* flush, free memory, and close file */
+    if (gz_comp(state, Z_FINISH) == -1)
+        ret = state->err;
+    if (state->size) {
+        if (!state->direct) {
+            (void)deflateEnd(&(state->strm));
+            free(state->out);
+        }
+        free(state->in);
+    }
+    gz_error(state, Z_OK, NULL);
+    free(state->path);
+    if (close(state->fd) == -1)
+        ret = Z_ERRNO;
+    free(state);
+    return ret;
+}