zstdlib 0.1.0-x64-mingw32

data/ext/zstdlib/zstd-1.3.8/lib/decompress/zstd_decompress_block.h

@@ -0,0 +1,59 @@
+/*
+ * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+
+#ifndef ZSTD_DEC_BLOCK_H
+#define ZSTD_DEC_BLOCK_H
+
+/*-*******************************************************
+ *  Dependencies
+ *********************************************************/
+#include <stddef.h>   /* size_t */
+#include "zstd.h"    /* DCtx, and some public functions */
+#include "zstd_internal.h"  /* blockProperties_t, and some public functions */
+#include "zstd_decompress_internal.h"  /* ZSTD_seqSymbol */
+
+
+/* ===   Prototypes   === */
+
+/* note: prototypes already published within `zstd.h` :
+ * ZSTD_decompressBlock()
+ */
+
+/* note: prototypes already published within `zstd_internal.h` :
+ * ZSTD_getcBlockSize()
+ * ZSTD_decodeSeqHeaders()
+ */
+
+
+/* ZSTD_decompressBlock_internal() :
+ * decompress block, starting at `src`,
+ * into destination buffer `dst`.
+ * @return : decompressed block size,
+ *           or an error code (which can be tested using ZSTD_isError())
+ */
+size_t ZSTD_decompressBlock_internal(ZSTD_DCtx* dctx,
+                               void* dst, size_t dstCapacity,
+                         const void* src, size_t srcSize, const int frame);
+
+/* ZSTD_buildFSETable() :
+ * generate FSE decoding table for one symbol (ll, ml or off)
+ * this function must be called with valid parameters only
+ * (dt is large enough, normalizedCounter distribution total is a power of 2, max is within range, etc.)
+ * in which case it cannot fail.
+ * Internal use only.
+ */
+void ZSTD_buildFSETable(ZSTD_seqSymbol* dt,
+             const short* normalizedCounter, unsigned maxSymbolValue,
+             const U32* baseValue, const U32* nbAdditionalBits,
+                   unsigned tableLog);
+
+
+#endif /* ZSTD_DEC_BLOCK_H */

data/ext/zstdlib/zstd-1.3.8/lib/decompress/zstd_decompress_internal.h

@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+
+/* zstd_decompress_internal:
+ * objects and definitions shared within lib/decompress modules */
+
+ #ifndef ZSTD_DECOMPRESS_INTERNAL_H
+ #define ZSTD_DECOMPRESS_INTERNAL_H
+
+
+/*-*******************************************************
+ *  Dependencies
+ *********************************************************/
+#include "mem.h"             /* BYTE, U16, U32 */
+#include "zstd_internal.h"   /* ZSTD_seqSymbol */
+
+
+
+/*-*******************************************************
+ *  Constants
+ *********************************************************/
+static const U32 LL_base[MaxLL+1] = {
+                 0,    1,    2,     3,     4,     5,     6,      7,
+                 8,    9,   10,    11,    12,    13,    14,     15,
+                16,   18,   20,    22,    24,    28,    32,     40,
+                48,   64, 0x80, 0x100, 0x200, 0x400, 0x800, 0x1000,
+                0x2000, 0x4000, 0x8000, 0x10000 };
+
+static const U32 OF_base[MaxOff+1] = {
+                 0,        1,       1,       5,     0xD,     0x1D,     0x3D,     0x7D,
+                 0xFD,   0x1FD,   0x3FD,   0x7FD,   0xFFD,   0x1FFD,   0x3FFD,   0x7FFD,
+                 0xFFFD, 0x1FFFD, 0x3FFFD, 0x7FFFD, 0xFFFFD, 0x1FFFFD, 0x3FFFFD, 0x7FFFFD,
+                 0xFFFFFD, 0x1FFFFFD, 0x3FFFFFD, 0x7FFFFFD, 0xFFFFFFD, 0x1FFFFFFD, 0x3FFFFFFD, 0x7FFFFFFD };
+
+static const U32 OF_bits[MaxOff+1] = {
+                     0,  1,  2,  3,  4,  5,  6,  7,
+                     8,  9, 10, 11, 12, 13, 14, 15,
+                    16, 17, 18, 19, 20, 21, 22, 23,
+                    24, 25, 26, 27, 28, 29, 30, 31 };
+
+static const U32 ML_base[MaxML+1] = {
+                     3,  4,  5,    6,     7,     8,     9,    10,
+                    11, 12, 13,   14,    15,    16,    17,    18,
+                    19, 20, 21,   22,    23,    24,    25,    26,
+                    27, 28, 29,   30,    31,    32,    33,    34,
+                    35, 37, 39,   41,    43,    47,    51,    59,
+                    67, 83, 99, 0x83, 0x103, 0x203, 0x403, 0x803,
+                    0x1003, 0x2003, 0x4003, 0x8003, 0x10003 };
+
+
+/*-*******************************************************
+ *  Decompression types
+ *********************************************************/
+ typedef struct {
+     U32 fastMode;
+     U32 tableLog;
+ } ZSTD_seqSymbol_header;
+
+ typedef struct {
+     U16  nextState;
+     BYTE nbAdditionalBits;
+     BYTE nbBits;
+     U32  baseValue;
+ } ZSTD_seqSymbol;
+
+ #define SEQSYMBOL_TABLE_SIZE(log)   (1 + (1 << (log)))
+
+typedef struct {
+    ZSTD_seqSymbol LLTable[SEQSYMBOL_TABLE_SIZE(LLFSELog)];    /* Note : Space reserved for FSE Tables */
+    ZSTD_seqSymbol OFTable[SEQSYMBOL_TABLE_SIZE(OffFSELog)];   /* is also used as temporary workspace while building hufTable during DDict creation */
+    ZSTD_seqSymbol MLTable[SEQSYMBOL_TABLE_SIZE(MLFSELog)];    /* and therefore must be at least HUF_DECOMPRESS_WORKSPACE_SIZE large */
+    HUF_DTable hufTable[HUF_DTABLE_SIZE(HufLog)];  /* can accommodate HUF_decompress4X */
+    U32 rep[ZSTD_REP_NUM];
+} ZSTD_entropyDTables_t;
+
+typedef enum { ZSTDds_getFrameHeaderSize, ZSTDds_decodeFrameHeader,
+               ZSTDds_decodeBlockHeader, ZSTDds_decompressBlock,
+               ZSTDds_decompressLastBlock, ZSTDds_checkChecksum,
+               ZSTDds_decodeSkippableHeader, ZSTDds_skipFrame } ZSTD_dStage;
+
+typedef enum { zdss_init=0, zdss_loadHeader,
+               zdss_read, zdss_load, zdss_flush } ZSTD_dStreamStage;
+
+struct ZSTD_DCtx_s
+{
+    const ZSTD_seqSymbol* LLTptr;
+    const ZSTD_seqSymbol* MLTptr;
+    const ZSTD_seqSymbol* OFTptr;
+    const HUF_DTable* HUFptr;
+    ZSTD_entropyDTables_t entropy;
+    U32 workspace[HUF_DECOMPRESS_WORKSPACE_SIZE_U32];   /* space needed when building huffman tables */
+    const void* previousDstEnd;   /* detect continuity */
+    const void* prefixStart;      /* start of current segment */
+    const void* virtualStart;     /* virtual start of previous segment if it was just before current one */
+    const void* dictEnd;          /* end of previous segment */
+    size_t expected;
+    ZSTD_frameHeader fParams;
+    U64 decodedSize;
+    blockType_e bType;            /* used in ZSTD_decompressContinue(), store blockType between block header decoding and block decompression stages */
+    ZSTD_dStage stage;
+    U32 litEntropy;
+    U32 fseEntropy;
+    XXH64_state_t xxhState;
+    size_t headerSize;
+    ZSTD_format_e format;
+    const BYTE* litPtr;
+    ZSTD_customMem customMem;
+    size_t litSize;
+    size_t rleSize;
+    size_t staticSize;
+    int bmi2;                     /* == 1 if the CPU supports BMI2 and 0 otherwise. CPU support is determined dynamically once per context lifetime. */
+
+    /* dictionary */
+    ZSTD_DDict* ddictLocal;
+    const ZSTD_DDict* ddict;     /* set by ZSTD_initDStream_usingDDict(), or ZSTD_DCtx_refDDict() */
+    U32 dictID;
+    int ddictIsCold;             /* if == 1 : dictionary is "new" for working context, and presumed "cold" (not in cpu cache) */
+
+    /* streaming */
+    ZSTD_dStreamStage streamStage;
+    char*  inBuff;
+    size_t inBuffSize;
+    size_t inPos;
+    size_t maxWindowSize;
+    char*  outBuff;
+    size_t outBuffSize;
+    size_t outStart;
+    size_t outEnd;
+    size_t lhSize;
+    void* legacyContext;
+    U32 previousLegacyVersion;
+    U32 legacyVersion;
+    U32 hostageByte;
+    int noForwardProgress;
+
+    /* workspace */
+    BYTE litBuffer[ZSTD_BLOCKSIZE_MAX + WILDCOPY_OVERLENGTH];
+    BYTE headerBuffer[ZSTD_FRAMEHEADERSIZE_MAX];
+};  /* typedef'd to ZSTD_DCtx within "zstd.h" */
+
+
+/*-*******************************************************
+ *  Shared internal functions
+ *********************************************************/
+
+/*! ZSTD_loadDEntropy() :
+ *  dict : must point at beginning of a valid zstd dictionary.
+ * @return : size of entropy tables read */
+size_t ZSTD_loadDEntropy(ZSTD_entropyDTables_t* entropy,
+                   const void* const dict, size_t const dictSize);
+
+/*! ZSTD_checkContinuity() :
+ *  check if next `dst` follows previous position, where decompression ended.
+ *  If yes, do nothing (continue on current segment).
+ *  If not, classify previous segment as "external dictionary", and start a new segment.
+ *  This function cannot fail. */
+void ZSTD_checkContinuity(ZSTD_DCtx* dctx, const void* dst);
+
+
+#endif /* ZSTD_DECOMPRESS_INTERNAL_H */

data/ext/zstdlib/zstd-1.3.8/lib/zstd.h

@@ -0,0 +1,1766 @@
+/*
+ * Copyright (c) 2016-present, Yann Collet, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+#ifndef ZSTD_H_235446
+#define ZSTD_H_235446
+
+/* ======   Dependency   ======*/
+#include <stddef.h>   /* size_t */
+
+
+/* =====   ZSTDLIB_API : control library symbols visibility   ===== */
+#ifndef ZSTDLIB_VISIBILITY
+#  if defined(__GNUC__) && (__GNUC__ >= 4)
+#    define ZSTDLIB_VISIBILITY __attribute__ ((visibility ("default")))
+#  else
+#    define ZSTDLIB_VISIBILITY
+#  endif
+#endif
+#if defined(ZSTD_DLL_EXPORT) && (ZSTD_DLL_EXPORT==1)
+#  define ZSTDLIB_API __declspec(dllexport) ZSTDLIB_VISIBILITY
+#elif defined(ZSTD_DLL_IMPORT) && (ZSTD_DLL_IMPORT==1)
+#  define ZSTDLIB_API __declspec(dllimport) ZSTDLIB_VISIBILITY /* It isn't required but allows to generate better code, saving a function pointer load from the IAT and an indirect jump.*/
+#else
+#  define ZSTDLIB_API ZSTDLIB_VISIBILITY
+#endif
+
+
+/*******************************************************************************
+  Introduction
+
+  zstd, short for Zstandard, is a fast lossless compression algorithm, targeting
+  real-time compression scenarios at zlib-level and better compression ratios.
+  The zstd compression library provides in-memory compression and decompression
+  functions.
+
+  The library supports regular compression levels from 1 up to ZSTD_maxCLevel(),
+  which is currently 22. Levels >= 20, labeled `--ultra`, should be used with
+  caution, as they require more memory. The library also offers negative
+  compression levels, which extend the range of speed vs. ratio preferences.
+  The lower the level, the faster the speed (at the cost of compression).
+
+  Compression can be done in:
+    - a single step (described as Simple API)
+    - a single step, reusing a context (described as Explicit context)
+    - unbounded multiple steps (described as Streaming compression)
+
+  The compression ratio achievable on small data can be highly improved using
+  a dictionary. Dictionary compression can be performed in:
+    - a single step (described as Simple dictionary API)
+    - a single step, reusing a dictionary (described as Bulk-processing
+      dictionary API)
+
+  Advanced experimental functions can be accessed using
+  `#define ZSTD_STATIC_LINKING_ONLY` before including zstd.h.
+
+  Advanced experimental APIs should never be used with a dynamically-linked
+  library. They are not "stable"; their definitions or signatures may change in
+  the future. Only static linking is allowed.
+*******************************************************************************/
+
+/*------   Version   ------*/
+#define ZSTD_VERSION_MAJOR    1
+#define ZSTD_VERSION_MINOR    3
+#define ZSTD_VERSION_RELEASE  8
+
+#define ZSTD_VERSION_NUMBER  (ZSTD_VERSION_MAJOR *100*100 + ZSTD_VERSION_MINOR *100 + ZSTD_VERSION_RELEASE)
+ZSTDLIB_API unsigned ZSTD_versionNumber(void);   /**< to check runtime library version */
+
+#define ZSTD_LIB_VERSION ZSTD_VERSION_MAJOR.ZSTD_VERSION_MINOR.ZSTD_VERSION_RELEASE
+#define ZSTD_QUOTE(str) #str
+#define ZSTD_EXPAND_AND_QUOTE(str) ZSTD_QUOTE(str)
+#define ZSTD_VERSION_STRING ZSTD_EXPAND_AND_QUOTE(ZSTD_LIB_VERSION)
+ZSTDLIB_API const char* ZSTD_versionString(void);   /* requires v1.3.0+ */
+
+/***************************************
+*  Default constant
+***************************************/
+#ifndef ZSTD_CLEVEL_DEFAULT
+#  define ZSTD_CLEVEL_DEFAULT 3
+#endif
+
+/***************************************
+*  Simple API
+***************************************/
+/*! ZSTD_compress() :
+ *  Compresses `src` content as a single zstd compressed frame into already allocated `dst`.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ *  @return : compressed size written into `dst` (<= `dstCapacity),
+ *            or an error code if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_compress( void* dst, size_t dstCapacity,
+                            const void* src, size_t srcSize,
+                                  int compressionLevel);
+
+/*! ZSTD_decompress() :
+ *  `compressedSize` : must be the _exact_ size of some number of compressed and/or skippable frames.
+ *  `dstCapacity` is an upper bound of originalSize to regenerate.
+ *  If user cannot imply a maximum upper bound, it's better to use streaming mode to decompress data.
+ *  @return : the number of bytes decompressed into `dst` (<= `dstCapacity`),
+ *            or an errorCode if it fails (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_decompress( void* dst, size_t dstCapacity,
+                              const void* src, size_t compressedSize);
+
+/*! ZSTD_getFrameContentSize() : requires v1.3.0+
+ *  `src` should point to the start of a ZSTD encoded frame.
+ *  `srcSize` must be at least as large as the frame header.
+ *            hint : any size >= `ZSTD_frameHeaderSize_max` is large enough.
+ *  @return : - decompressed size of `src` frame content, if known
+ *            - ZSTD_CONTENTSIZE_UNKNOWN if the size cannot be determined
+ *            - ZSTD_CONTENTSIZE_ERROR if an error occurred (e.g. invalid magic number, srcSize too small)
+ *   note 1 : a 0 return value means the frame is valid but "empty".
+ *   note 2 : decompressed size is an optional field, it may not be present, typically in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *            Optionally, application can rely on some implicit limit,
+ *            as ZSTD_decompress() only needs an upper bound of decompressed size.
+ *            (For example, data could be necessarily cut into blocks <= 16 KB).
+ *   note 3 : decompressed size is always present when compression is completed using single-pass functions,
+ *            such as ZSTD_compress(), ZSTD_compressCCtx() ZSTD_compress_usingDict() or ZSTD_compress_usingCDict().
+ *   note 4 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 5 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure return value fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 6 : This function replaces ZSTD_getDecompressedSize() */
+#define ZSTD_CONTENTSIZE_UNKNOWN (0ULL - 1)
+#define ZSTD_CONTENTSIZE_ERROR   (0ULL - 2)
+ZSTDLIB_API unsigned long long ZSTD_getFrameContentSize(const void *src, size_t srcSize);
+
+/*! ZSTD_getDecompressedSize() :
+ *  NOTE: This function is now obsolete, in favor of ZSTD_getFrameContentSize().
+ *  Both functions work the same way, but ZSTD_getDecompressedSize() blends
+ *  "empty", "unknown" and "error" results to the same return value (0),
+ *  while ZSTD_getFrameContentSize() gives them separate return values.
+ * @return : decompressed size of `src` frame content _if known and not empty_, 0 otherwise. */
+ZSTDLIB_API unsigned long long ZSTD_getDecompressedSize(const void* src, size_t srcSize);
+
+
+/*======  Helper functions  ======*/
+#define ZSTD_COMPRESSBOUND(srcSize)   ((srcSize) + ((srcSize)>>8) + (((srcSize) < (128<<10)) ? (((128<<10) - (srcSize)) >> 11) /* margin, from 64 to 0 */ : 0))  /* this formula ensures that bound(A) + bound(B) <= bound(A+B) as long as A and B >= 128 KB */
+ZSTDLIB_API size_t      ZSTD_compressBound(size_t srcSize); /*!< maximum compressed size in worst case single-pass scenario */
+ZSTDLIB_API unsigned    ZSTD_isError(size_t code);          /*!< tells if a `size_t` function result is an error code */
+ZSTDLIB_API const char* ZSTD_getErrorName(size_t code);     /*!< provides readable string from an error code */
+ZSTDLIB_API int         ZSTD_maxCLevel(void);               /*!< maximum compression level available */
+
+
+/***************************************
+*  Explicit context
+***************************************/
+/*= Compression context
+ *  When compressing many times,
+ *  it is recommended to allocate a context just once, and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Use one context per thread for parallel execution in multi-threaded environments. */
+typedef struct ZSTD_CCtx_s ZSTD_CCtx;
+ZSTDLIB_API ZSTD_CCtx* ZSTD_createCCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeCCtx(ZSTD_CCtx* cctx);
+
+/*! ZSTD_compressCCtx() :
+ *  Same as ZSTD_compress(), using an explicit ZSTD_CCtx
+ *  The function will compress at requested compression level,
+ *  ignoring any other parameter */
+ZSTDLIB_API size_t ZSTD_compressCCtx(ZSTD_CCtx* cctx,
+                                     void* dst, size_t dstCapacity,
+                               const void* src, size_t srcSize,
+                                     int compressionLevel);
+
+/*= Decompression context
+ *  When decompressing many times,
+ *  it is recommended to allocate a context only once,
+ *  and re-use it for each successive compression operation.
+ *  This will make workload friendlier for system's memory.
+ *  Use one context per thread for parallel execution. */
+typedef struct ZSTD_DCtx_s ZSTD_DCtx;
+ZSTDLIB_API ZSTD_DCtx* ZSTD_createDCtx(void);
+ZSTDLIB_API size_t     ZSTD_freeDCtx(ZSTD_DCtx* dctx);
+
+/*! ZSTD_decompressDCtx() :
+ *  Same as ZSTD_decompress(),
+ *  requires an allocated ZSTD_DCtx.
+ *  Compatible with sticky parameters.
+ */
+ZSTDLIB_API size_t ZSTD_decompressDCtx(ZSTD_DCtx* dctx,
+                                       void* dst, size_t dstCapacity,
+                                 const void* src, size_t srcSize);
+
+
+/**************************
+*  Simple dictionary API
+***************************/
+/*! ZSTD_compress_usingDict() :
+ *  Compression at an explicit compression level using a Dictionary.
+ *  A dictionary can be any arbitrary data segment (also called a prefix),
+ *  or a buffer with specified information (see dictBuilder/zdict.h).
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note 2 : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_compress_usingDict(ZSTD_CCtx* ctx,
+                                           void* dst, size_t dstCapacity,
+                                     const void* src, size_t srcSize,
+                                     const void* dict,size_t dictSize,
+                                           int compressionLevel);
+
+/*! ZSTD_decompress_usingDict() :
+ *  Decompression using a known Dictionary.
+ *  Dictionary must be identical to the one used during compression.
+ *  Note : This function loads the dictionary, resulting in significant startup delay.
+ *         It's intended for a dictionary used only once.
+ *  Note : When `dict == NULL || dictSize < 8` no dictionary is used. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDict(ZSTD_DCtx* dctx,
+                                             void* dst, size_t dstCapacity,
+                                       const void* src, size_t srcSize,
+                                       const void* dict,size_t dictSize);
+
+
+/***********************************
+ *  Bulk processing dictionary API
+ **********************************/
+typedef struct ZSTD_CDict_s ZSTD_CDict;
+
+/*! ZSTD_createCDict() :
+ *  When compressing multiple messages / blocks using the same dictionary, it's recommended to load it only once.
+ *  ZSTD_createCDict() will create a digested dictionary, ready to start future compression operations without startup cost.
+ *  ZSTD_CDict can be created once and shared by multiple threads concurrently, since its usage is read-only.
+ * `dictBuffer` can be released after ZSTD_CDict creation, because its content is copied within CDict.
+ *  Consider experimental function `ZSTD_createCDict_byReference()` if you prefer to not duplicate `dictBuffer` content.
+ *  Note : A ZSTD_CDict can be created from an empty dictBuffer, but it is inefficient when used to compress small data. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict(const void* dictBuffer, size_t dictSize,
+                                         int compressionLevel);
+
+/*! ZSTD_freeCDict() :
+ *  Function frees memory allocated by ZSTD_createCDict(). */
+ZSTDLIB_API size_t      ZSTD_freeCDict(ZSTD_CDict* CDict);
+
+/*! ZSTD_compress_usingCDict() :
+ *  Compression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times.
+ *  Note : compression level is _decided at dictionary creation time_,
+ *     and frame parameters are hardcoded (dictID=yes, contentSize=yes, checksum=no) */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict(ZSTD_CCtx* cctx,
+                                            void* dst, size_t dstCapacity,
+                                      const void* src, size_t srcSize,
+                                      const ZSTD_CDict* cdict);
+
+
+typedef struct ZSTD_DDict_s ZSTD_DDict;
+
+/*! ZSTD_createDDict() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  dictBuffer can be released after DDict creation, as its content is copied inside DDict. */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict(const void* dictBuffer, size_t dictSize);
+
+/*! ZSTD_freeDDict() :
+ *  Function frees memory allocated with ZSTD_createDDict() */
+ZSTDLIB_API size_t      ZSTD_freeDDict(ZSTD_DDict* ddict);
+
+/*! ZSTD_decompress_usingDDict() :
+ *  Decompression using a digested Dictionary.
+ *  Recommended when same dictionary is used multiple times. */
+ZSTDLIB_API size_t ZSTD_decompress_usingDDict(ZSTD_DCtx* dctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_DDict* ddict);
+
+
+/****************************
+*  Streaming
+****************************/
+
+typedef struct ZSTD_inBuffer_s {
+  const void* src;    /**< start of input buffer */
+  size_t size;        /**< size of input buffer */
+  size_t pos;         /**< position where reading stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_inBuffer;
+
+typedef struct ZSTD_outBuffer_s {
+  void*  dst;         /**< start of output buffer */
+  size_t size;        /**< size of output buffer */
+  size_t pos;         /**< position where writing stopped. Will be updated. Necessarily 0 <= pos <= size */
+} ZSTD_outBuffer;
+
+
+
+/*-***********************************************************************
+*  Streaming compression - HowTo
+*
+*  A ZSTD_CStream object is required to track streaming operation.
+*  Use ZSTD_createCStream() and ZSTD_freeCStream() to create/release resources.
+*  ZSTD_CStream objects can be reused multiple times on consecutive compression operations.
+*  It is recommended to re-use ZSTD_CStream since it will play nicer with system's memory, by re-using already allocated memory.
+*
+*  For parallel execution, use one separate ZSTD_CStream per thread.
+*
+*  note : since v1.3.0, ZSTD_CStream and ZSTD_CCtx are the same thing.
+*
+*  Parameters are sticky : when starting a new compression on the same context,
+*  it will re-use the same sticky parameters as previous compression session.
+*  When in doubt, it's recommended to fully initialize the context before usage.
+*  Use ZSTD_initCStream() to set the parameter to a selected compression level.
+*  Use advanced API (ZSTD_CCtx_setParameter(), etc.) to set more specific parameters.
+*
+*  Use ZSTD_compressStream() as many times as necessary to consume input stream.
+*  The function will automatically update both `pos` fields within `input` and `output`.
+*  Note that the function may not consume the entire input,
+*  for example, because the output buffer is already full,
+*  in which case `input.pos < input.size`.
+*  The caller must check if input has been entirely consumed.
+*  If not, the caller must make some room to receive more compressed data,
+*  and then present again remaining input data.
+* @return : a size hint, preferred nb of bytes to use as input for next function call
+*           or an error code, which can be tested using ZSTD_isError().
+*           Note 1 : it's just a hint, to help latency a little, any value will work fine.
+*           Note 2 : size hint is guaranteed to be <= ZSTD_CStreamInSize()
+*
+*  At any moment, it's possible to flush whatever data might remain stuck within internal buffer,
+*  using ZSTD_flushStream(). `output->pos` will be updated.
+*  Note that, if `output->size` is too small, a single invocation of ZSTD_flushStream() might not be enough (return code > 0).
+*  In which case, make some room to receive more compressed data, and call again ZSTD_flushStream().
+*  @return : 0 if internal buffers are entirely flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+*  ZSTD_endStream() instructs to finish a frame.
+*  It will perform a flush and write frame epilogue.
+*  The epilogue is required for decoders to consider a frame completed.
+*  flush() operation is the same, and follows same rules as ZSTD_flushStream().
+*  @return : 0 if frame fully completed and fully flushed,
+*            >0 if some data still present within internal buffer (the value is minimal estimation of remaining size),
+*            or an error code, which can be tested using ZSTD_isError().
+*
+* *******************************************************************/
+
+typedef ZSTD_CCtx ZSTD_CStream;  /**< CCtx and CStream are now effectively same object (>= v1.3.0) */
+                                 /* Continue to distinguish them for compatibility with older versions <= v1.2.0 */
+/*===== ZSTD_CStream management functions =====*/
+ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream(void);
+ZSTDLIB_API size_t ZSTD_freeCStream(ZSTD_CStream* zcs);
+
+/*===== Streaming compression functions =====*/
+ZSTDLIB_API size_t ZSTD_initCStream(ZSTD_CStream* zcs, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_compressStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+ZSTDLIB_API size_t ZSTD_flushStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+ZSTDLIB_API size_t ZSTD_endStream(ZSTD_CStream* zcs, ZSTD_outBuffer* output);
+
+ZSTDLIB_API size_t ZSTD_CStreamInSize(void);    /**< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_CStreamOutSize(void);   /**< recommended size for output buffer. Guarantee to successfully flush at least one complete compressed block in all circumstances. */
+
+
+
+/*-***************************************************************************
+*  Streaming decompression - HowTo
+*
+*  A ZSTD_DStream object is required to track streaming operations.
+*  Use ZSTD_createDStream() and ZSTD_freeDStream() to create/release resources.
+*  ZSTD_DStream objects can be re-used multiple times.
+*
+*  Use ZSTD_initDStream() to start a new decompression operation.
+* @return : recommended first input size
+*  Alternatively, use advanced API to set specific properties.
+*
+*  Use ZSTD_decompressStream() repetitively to consume your input.
+*  The function will update both `pos` fields.
+*  If `input.pos < input.size`, some input has not been consumed.
+*  It's up to the caller to present again remaining data.
+*  The function tries to flush all data decoded immediately, respecting output buffer size.
+*  If `output.pos < output.size`, decoder has flushed everything it could.
+*  But if `output.pos == output.size`, there might be some data left within internal buffers.,
+*  In which case, call ZSTD_decompressStream() again to flush whatever remains in the buffer.
+*  Note : with no additional input provided, amount of data flushed is necessarily <= ZSTD_BLOCKSIZE_MAX.
+* @return : 0 when a frame is completely decoded and fully flushed,
+*        or an error code, which can be tested using ZSTD_isError(),
+*        or any other value > 0, which means there is still some decoding or flushing to do to complete current frame :
+*                                the return value is a suggested next input size (just a hint for better latency)
+*                                that will never request more than the remaining frame size.
+* *******************************************************************************/
+
+typedef ZSTD_DCtx ZSTD_DStream;  /**< DCtx and DStream are now effectively same object (>= v1.3.0) */
+                                 /* For compatibility with versions <= v1.2.0, prefer differentiating them. */
+/*===== ZSTD_DStream management functions =====*/
+ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream(void);
+ZSTDLIB_API size_t ZSTD_freeDStream(ZSTD_DStream* zds);
+
+/*===== Streaming decompression functions =====*/
+ZSTDLIB_API size_t ZSTD_initDStream(ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_decompressStream(ZSTD_DStream* zds, ZSTD_outBuffer* output, ZSTD_inBuffer* input);
+
+ZSTDLIB_API size_t ZSTD_DStreamInSize(void);    /*!< recommended size for input buffer */
+ZSTDLIB_API size_t ZSTD_DStreamOutSize(void);   /*!< recommended size for output buffer. Guarantee to successfully flush at least one complete block in all circumstances. */
+
+#endif  /* ZSTD_H_235446 */
+
+
+
+
+/****************************************************************************************
+ *   ADVANCED AND EXPERIMENTAL FUNCTIONS
+ ****************************************************************************************
+ * The definitions in the following section are considered experimental.
+ * They are provided for advanced scenarios.
+ * They should never be used with a dynamic library, as prototypes may change in the future.
+ * Use them only in association with static linking.
+ * ***************************************************************************************/
+
+#if defined(ZSTD_STATIC_LINKING_ONLY) && !defined(ZSTD_H_ZSTD_STATIC_LINKING_ONLY)
+#define ZSTD_H_ZSTD_STATIC_LINKING_ONLY
+
+
+/****************************************************************************************
+ *   Candidate API for promotion to stable status
+ ****************************************************************************************
+ * The following symbols and constants form the "staging area" :
+ * they are considered to join "stable API" by v1.4.0.
+ * The proposal is written so that it can be made stable "as is",
+ * though it's still possible to suggest improvements.
+ * Staging is in fact last chance for changes,
+ * the API is locked once reaching "stable" status.
+ * ***************************************************************************************/
+
+
+/* ===  Constants   === */
+
+/* all magic numbers are supposed read/written to/from files/memory using little-endian convention */
+#define ZSTD_MAGICNUMBER            0xFD2FB528    /* valid since v0.8.0 */
+#define ZSTD_MAGIC_DICTIONARY       0xEC30A437    /* valid since v0.7.0 */
+#define ZSTD_MAGIC_SKIPPABLE_START  0x184D2A50    /* all 16 values, from 0x184D2A50 to 0x184D2A5F, signal the beginning of a skippable frame */
+#define ZSTD_MAGIC_SKIPPABLE_MASK   0xFFFFFFF0
+
+#define ZSTD_BLOCKSIZELOG_MAX  17
+#define ZSTD_BLOCKSIZE_MAX     (1<<ZSTD_BLOCKSIZELOG_MAX)
+
+
+/* ===   query limits   === */
+
+ZSTDLIB_API int ZSTD_minCLevel(void);  /*!< minimum negative compression level allowed */
+
+
+/* ===   frame size   === */
+
+/*! ZSTD_findFrameCompressedSize() :
+ * `src` should point to the start of a ZSTD frame or skippable frame.
+ * `srcSize` must be >= first frame size
+ * @return : the compressed size of the first frame starting at `src`,
+ *           suitable to pass as `srcSize` to `ZSTD_decompress` or similar,
+ *        or an error code if input is invalid */
+ZSTDLIB_API size_t ZSTD_findFrameCompressedSize(const void* src, size_t srcSize);
+
+
+/* ===   Memory management   === */
+
+/*! ZSTD_sizeof_*() :
+ *  These functions give the _current_ memory usage of selected object.
+ *  Note that object memory usage can evolve (increase or decrease) over time. */
+ZSTDLIB_API size_t ZSTD_sizeof_CCtx(const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_sizeof_DCtx(const ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_sizeof_CStream(const ZSTD_CStream* zcs);
+ZSTDLIB_API size_t ZSTD_sizeof_DStream(const ZSTD_DStream* zds);
+ZSTDLIB_API size_t ZSTD_sizeof_CDict(const ZSTD_CDict* cdict);
+ZSTDLIB_API size_t ZSTD_sizeof_DDict(const ZSTD_DDict* ddict);
+
+
+/***************************************
+*  Advanced compression API
+***************************************/
+
+/* API design :
+ *   Parameters are pushed one by one into an existing context,
+ *   using ZSTD_CCtx_set*() functions.
+ *   Pushed parameters are sticky : they are valid for next compressed frame, and any subsequent frame.
+ *   "sticky" parameters are applicable to `ZSTD_compress2()` and `ZSTD_compressStream*()` !
+ *   They do not apply to "simple" one-shot variants such as ZSTD_compressCCtx()
+ *
+ *   It's possible to reset all parameters to "default" using ZSTD_CCtx_reset().
+ *
+ *   This API supercedes all other "advanced" API entry points in the experimental section.
+ *   In the future, we expect to remove from experimental API entry points which are redundant with this API.
+ */
+
+
+/* Compression strategies, listed from fastest to strongest */
+typedef enum { ZSTD_fast=1,
+               ZSTD_dfast=2,
+               ZSTD_greedy=3,
+               ZSTD_lazy=4,
+               ZSTD_lazy2=5,
+               ZSTD_btlazy2=6,
+               ZSTD_btopt=7,
+               ZSTD_btultra=8,
+               ZSTD_btultra2=9
+               /* note : new strategies _might_ be added in the future.
+                         Only the order (from fast to strong) is guaranteed */
+} ZSTD_strategy;
+
+
+typedef enum {
+
+    /* compression parameters */
+    ZSTD_c_compressionLevel=100, /* Update all compression parameters according to pre-defined cLevel table
+                              * Default level is ZSTD_CLEVEL_DEFAULT==3.
+                              * Special: value 0 means default, which is controlled by ZSTD_CLEVEL_DEFAULT.
+                              * Note 1 : it's possible to pass a negative compression level.
+                              * Note 2 : setting a level sets all default values of other compression parameters */
+    ZSTD_c_windowLog=101,    /* Maximum allowed back-reference distance, expressed as power of 2.
+                              * Must be clamped between ZSTD_WINDOWLOG_MIN and ZSTD_WINDOWLOG_MAX.
+                              * Special: value 0 means "use default windowLog".
+                              * Note: Using a windowLog greater than ZSTD_WINDOWLOG_LIMIT_DEFAULT
+                              *       requires explicitly allowing such window size at decompression stage if using streaming. */
+    ZSTD_c_hashLog=102,      /* Size of the initial probe table, as a power of 2.
+                              * Resulting memory usage is (1 << (hashLog+2)).
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX.
+                              * Larger tables improve compression ratio of strategies <= dFast,
+                              * and improve speed of strategies > dFast.
+                              * Special: value 0 means "use default hashLog". */
+    ZSTD_c_chainLog=103,     /* Size of the multi-probe search table, as a power of 2.
+                              * Resulting memory usage is (1 << (chainLog+2)).
+                              * Must be clamped between ZSTD_CHAINLOG_MIN and ZSTD_CHAINLOG_MAX.
+                              * Larger tables result in better and slower compression.
+                              * This parameter is useless when using "fast" strategy.
+                              * It's still useful when using "dfast" strategy,
+                              * in which case it defines a secondary probe table.
+                              * Special: value 0 means "use default chainLog". */
+    ZSTD_c_searchLog=104,    /* Number of search attempts, as a power of 2.
+                              * More attempts result in better and slower compression.
+                              * This parameter is useless when using "fast" and "dFast" strategies.
+                              * Special: value 0 means "use default searchLog". */
+    ZSTD_c_minMatch=105,     /* Minimum size of searched matches.
+                              * Note that Zstandard can still find matches of smaller size,
+                              * it just tweaks its search algorithm to look for this size and larger.
+                              * Larger values increase compression and decompression speed, but decrease ratio.
+                              * Must be clamped between ZSTD_MINMATCH_MIN and ZSTD_MINMATCH_MAX.
+                              * Note that currently, for all strategies < btopt, effective minimum is 4.
+                              *                    , for all strategies > fast, effective maximum is 6.
+                              * Special: value 0 means "use default minMatchLength". */
+    ZSTD_c_targetLength=106, /* Impact of this field depends on strategy.
+                              * For strategies btopt, btultra & btultra2:
+                              *     Length of Match considered "good enough" to stop search.
+                              *     Larger values make compression stronger, and slower.
+                              * For strategy fast:
+                              *     Distance between match sampling.
+                              *     Larger values make compression faster, and weaker.
+                              * Special: value 0 means "use default targetLength". */
+    ZSTD_c_strategy=107,     /* See ZSTD_strategy enum definition.
+                              * The higher the value of selected strategy, the more complex it is,
+                              * resulting in stronger and slower compression.
+                              * Special: value 0 means "use default strategy". */
+
+    /* LDM mode parameters */
+    ZSTD_c_enableLongDistanceMatching=160, /* Enable long distance matching.
+                                     * This parameter is designed to improve compression ratio
+                                     * for large inputs, by finding large matches at long distance.
+                                     * It increases memory usage and window size.
+                                     * Note: enabling this parameter increases default ZSTD_c_windowLog to 128 MB
+                                     * except when expressly set to a different value. */
+    ZSTD_c_ldmHashLog=161,   /* Size of the table for long distance matching, as a power of 2.
+                              * Larger values increase memory usage and compression ratio,
+                              * but decrease compression speed.
+                              * Must be clamped between ZSTD_HASHLOG_MIN and ZSTD_HASHLOG_MAX
+                              * default: windowlog - 7.
+                              * Special: value 0 means "automatically determine hashlog". */
+    ZSTD_c_ldmMinMatch=162,  /* Minimum match size for long distance matcher.
+                              * Larger/too small values usually decrease compression ratio.
+                              * Must be clamped between ZSTD_LDM_MINMATCH_MIN and ZSTD_LDM_MINMATCH_MAX.
+                              * Special: value 0 means "use default value" (default: 64). */
+    ZSTD_c_ldmBucketSizeLog=163, /* Log size of each bucket in the LDM hash table for collision resolution.
+                              * Larger values improve collision resolution but decrease compression speed.
+                              * The maximum value is ZSTD_LDM_BUCKETSIZELOG_MAX.
+                              * Special: value 0 means "use default value" (default: 3). */
+    ZSTD_c_ldmHashRateLog=164, /* Frequency of inserting/looking up entries into the LDM hash table.
+                              * Must be clamped between 0 and (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN).
+                              * Default is MAX(0, (windowLog - ldmHashLog)), optimizing hash table usage.
+                              * Larger values improve compression speed.
+                              * Deviating far from default value will likely result in a compression ratio decrease.
+                              * Special: value 0 means "automatically determine hashRateLog". */
+
+    /* frame parameters */
+    ZSTD_c_contentSizeFlag=200, /* Content size will be written into frame header _whenever known_ (default:1)
+                              * Content size must be known at the beginning of compression.
+                              * This is automatically the case when using ZSTD_compress2(),
+                              * For streaming variants, content size must be provided with ZSTD_CCtx_setPledgedSrcSize() */
+    ZSTD_c_checksumFlag=201, /* A 32-bits checksum of content is written at end of frame (default:0) */
+    ZSTD_c_dictIDFlag=202,   /* When applicable, dictionary's ID is written into frame header (default:1) */
+
+    /* multi-threading parameters */
+    /* These parameters are only useful if multi-threading is enabled (compiled with build macro ZSTD_MULTITHREAD).
+     * They return an error otherwise. */
+    ZSTD_c_nbWorkers=400,    /* Select how many threads will be spawned to compress in parallel.
+                              * When nbWorkers >= 1, triggers asynchronous mode when used with ZSTD_compressStream*() :
+                              * ZSTD_compressStream*() consumes input and flush output if possible, but immediately gives back control to caller,
+                              * while compression work is performed in parallel, within worker threads.
+                              * (note : a strong exception to this rule is when first invocation of ZSTD_compressStream2() sets ZSTD_e_end :
+                              *  in which case, ZSTD_compressStream2() delegates to ZSTD_compress2(), which is always a blocking call).
+                              * More workers improve speed, but also increase memory usage.
+                              * Default value is `0`, aka "single-threaded mode" : no worker is spawned, compression is performed inside Caller's thread, all invocations are blocking */
+    ZSTD_c_jobSize=401,      /* Size of a compression job. This value is enforced only when nbWorkers >= 1.
+                              * Each compression job is completed in parallel, so this value can indirectly impact the nb of active threads.
+                              * 0 means default, which is dynamically determined based on compression parameters.
+                              * Job size must be a minimum of overlap size, or 1 MB, whichever is largest.
+                              * The minimum size is automatically and transparently enforced */
+    ZSTD_c_overlapLog=402,   /* Control the overlap size, as a fraction of window size.
+                              * The overlap size is an amount of data reloaded from previous job at the beginning of a new job.
+                              * It helps preserve compression ratio, while each job is compressed in parallel.
+                              * This value is enforced only when nbWorkers >= 1.
+                              * Larger values increase compression ratio, but decrease speed.
+                              * Possible values range from 0 to 9 :
+                              * - 0 means "default" : value will be determined by the library, depending on strategy
+                              * - 1 means "no overlap"
+                              * - 9 means "full overlap", using a full window size.
+                              * Each intermediate rank increases/decreases load size by a factor 2 :
+                              * 9: full window;  8: w/2;  7: w/4;  6: w/8;  5:w/16;  4: w/32;  3:w/64;  2:w/128;  1:no overlap;  0:default
+                              * default value varies between 6 and 9, depending on strategy */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_rsyncable
+     * ZSTD_c_format
+     * ZSTD_c_forceMaxWindow
+     * ZSTD_c_forceAttachDict
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly;
+     *        also, the enums values themselves are unstable and can still change.
+     */
+     ZSTD_c_experimentalParam1=500,
+     ZSTD_c_experimentalParam2=10,
+     ZSTD_c_experimentalParam3=1000,
+     ZSTD_c_experimentalParam4=1001
+} ZSTD_cParameter;
+
+
+typedef struct {
+    size_t error;
+    int lowerBound;
+    int upperBound;
+} ZSTD_bounds;
+
+/*! ZSTD_cParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - lower and upper bounds, both inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_cParam_getBounds(ZSTD_cParameter cParam);
+
+/*! ZSTD_CCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_cParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is generally only possible during frame initialization (before starting compression).
+ *  Exception : when using multi-threading mode (nbWorkers >= 1),
+ *              the following parameters can be updated _during_ compression (within same frame):
+ *              => compressionLevel, hashLog, chainLog, searchLog, minMatch, targetLength and strategy.
+ *              new parameters will be active for next job only (after a flush()).
+ * @return : an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtx_setPledgedSrcSize() :
+ *  Total input data size to be compressed as a single frame.
+ *  Value will be written in frame header, unless if explicitly forbidden using ZSTD_c_contentSizeFlag.
+ *  This value will also be controlled at end of frame, and trigger an error if not respected.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : pledgedSrcSize==0 actually means zero, aka an empty frame.
+ *           In order to mean "unknown content size", pass constant ZSTD_CONTENTSIZE_UNKNOWN.
+ *           ZSTD_CONTENTSIZE_UNKNOWN is default value for any new frame.
+ *  Note 2 : pledgedSrcSize is only valid once, for the next frame.
+ *           It's discarded at the end of the frame, and replaced by ZSTD_CONTENTSIZE_UNKNOWN.
+ *  Note 3 : Whenever all input data is provided and consumed in a single round,
+ *           for example with ZSTD_compress2(),
+ *           or invoking immediately ZSTD_compressStream2(,,,ZSTD_e_end),
+ *           this value is automatically overriden by srcSize instead.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setPledgedSrcSize(ZSTD_CCtx* cctx, unsigned long long pledgedSrcSize);
+
+/*! ZSTD_CCtx_loadDictionary() :
+ *  Create an internal CDict from `dict` buffer.
+ *  Decompression will have to use same dictionary.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Loading a NULL (or 0-size) dictionary invalidates previous dictionary,
+ *           meaning "return to no-dictionary mode".
+ *  Note 1 : Dictionary is sticky, it will be used for all future compressed frames.
+ *           To return to "no-dictionary" situation, load a NULL dictionary (or reset parameters).
+ *  Note 2 : Loading a dictionary involves building tables.
+ *           It's also a CPU consuming operation, with non-negligible impact on latency.
+ *           Tables are dependent on compression parameters, and for this reason,
+ *           compression parameters can no longer be changed after loading a dictionary.
+ *  Note 3 :`dict` content will be copied internally.
+ *           Use experimental ZSTD_CCtx_loadDictionary_byReference() to reference content instead.
+ *           In such a case, dictionary buffer must outlive its users.
+ *  Note 4 : Use ZSTD_CCtx_loadDictionary_advanced()
+ *           to precisely select how dictionary content must be interpreted. */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_refCDict() :
+ *  Reference a prepared dictionary, to be used for all next compressed frames.
+ *  Note that compression parameters are enforced from within CDict,
+ *  and supercede any compression parameter previously set within CCtx.
+ *  The dictionary will remain valid for future compressed frames using same CCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Referencing a NULL CDict means "return to no-dictionary mode".
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Note 2 : CDict is just referenced, its lifetime must outlive its usage within CCtx. */
+ZSTDLIB_API size_t ZSTD_CCtx_refCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict);
+
+/*! ZSTD_CCtx_refPrefix() :
+ *  Reference a prefix (single-usage dictionary) for next compressed frame.
+ *  A prefix is **only used once**. Tables are discarded at end of frame (ZSTD_e_end).
+ *  Decompression will need same prefix to properly regenerate data.
+ *  Compressing with a prefix is similar in outcome as performing a diff and compressing it,
+ *  but performs much faster, especially during decompression (compression speed is tunable with compression level).
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special: Adding any prefix (including NULL) invalidates any previous prefix or dictionary
+ *  Note 1 : Prefix buffer is referenced. It **must** outlive compression.
+ *           Its content must remain unmodified during compression.
+ *  Note 2 : If the intention is to diff some large src data blob with some prior version of itself,
+ *           ensure that the window size is large enough to contain the entire source.
+ *           See ZSTD_c_windowLog.
+ *  Note 3 : Referencing a prefix involves building tables, which are dependent on compression parameters.
+ *           It's a CPU consuming operation, with non-negligible impact on latency.
+ *           If there is a need to use the same prefix multiple times, consider loadDictionary instead.
+ *  Note 4 : By default, the prefix is interpreted as raw content (ZSTD_dm_rawContent).
+ *           Use experimental ZSTD_CCtx_refPrefix_advanced() to alter dictionary interpretation. */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix(ZSTD_CCtx* cctx,
+                                 const void* prefix, size_t prefixSize);
+
+
+typedef enum {
+    ZSTD_reset_session_only = 1,
+    ZSTD_reset_parameters = 2,
+    ZSTD_reset_session_and_parameters = 3
+} ZSTD_ResetDirective;
+
+/*! ZSTD_CCtx_reset() :
+ *  There are 2 different things that can be reset, independently or jointly :
+ *  - The session : will stop compressing current frame, and make CCtx ready to start a new one.
+ *                  Useful after an error, or to interrupt any ongoing compression.
+ *                  Any internal data not yet flushed is cancelled.
+ *                  Compression parameters and dictionary remain unchanged.
+ *                  They will be used to compress next frame.
+ *                  Resetting session never fails.
+ *  - The parameters : changes all parameters back to "default".
+ *                  This removes any reference to any dictionary too.
+ *                  Parameters can only be changed between 2 sessions (i.e. no compression is currently ongoing)
+ *                  otherwise the reset fails, and function returns an error value (which can be tested using ZSTD_isError())
+ *  - Both : similar to resetting the session, followed by resetting parameters.
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_reset(ZSTD_CCtx* cctx, ZSTD_ResetDirective reset);
+
+
+
+/*! ZSTD_compress2() :
+ *  Behave the same as ZSTD_compressCCtx(), but compression parameters are set using the advanced API.
+ *  ZSTD_compress2() always starts a new frame.
+ *  Should cctx hold data from a previously unfinished frame, everything about it is forgotten.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - The function is always blocking, returns when compression is completed.
+ *  Hint : compression runs faster if `dstCapacity` >=  `ZSTD_compressBound(srcSize)`.
+ * @return : compressed size written into `dst` (<= `dstCapacity),
+ *           or an error code if it fails (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_compress2( ZSTD_CCtx* cctx,
+                                   void* dst, size_t dstCapacity,
+                             const void* src, size_t srcSize);
+
+typedef enum {
+    ZSTD_e_continue=0, /* collect more data, encoder decides when to output compressed result, for optimal compression ratio */
+    ZSTD_e_flush=1,    /* flush any data provided so far,
+                        * it creates (at least) one new block, that can be decoded immediately on reception;
+                        * frame will continue: any future data can still reference previously compressed data, improving compression. */
+    ZSTD_e_end=2       /* flush any remaining data _and_ close current frame.
+                        * note that frame is only closed after compressed data is fully flushed (return value == 0).
+                        * After that point, any additional data starts a new frame.
+                        * note : each frame is independent (does not reference any content from previous frame). */
+} ZSTD_EndDirective;
+
+/*! ZSTD_compressStream2() :
+ *  Behaves about the same as ZSTD_compressStream, with additional control on end directive.
+ *  - Compression parameters are pushed into CCtx before starting compression, using ZSTD_CCtx_set*()
+ *  - Compression parameters cannot be changed once compression is started (save a list of exceptions in multi-threading mode)
+ *  - outpot->pos must be <= dstCapacity, input->pos must be <= srcSize
+ *  - outpot->pos and input->pos will be updated. They are guaranteed to remain below their respective limit.
+ *  - When nbWorkers==0 (default), function is blocking : it completes its job before returning to caller.
+ *  - When nbWorkers>=1, function is non-blocking : it just acquires a copy of input, and distributes jobs to internal worker threads, flush whatever is available,
+ *                                                  and then immediately returns, just indicating that there is some data remaining to be flushed.
+ *                                                  The function nonetheless guarantees forward progress : it will return only after it reads or write at least 1+ byte.
+ *  - Exception : if the first call requests a ZSTD_e_end directive and provides enough dstCapacity, the function delegates to ZSTD_compress2() which is always blocking.
+ *  - @return provides a minimum amount of data remaining to be flushed from internal buffers
+ *            or an error code, which can be tested using ZSTD_isError().
+ *            if @return != 0, flush is not fully completed, there is still some data left within internal buffers.
+ *            This is useful for ZSTD_e_flush, since in this case more flushes are necessary to empty all buffers.
+ *            For ZSTD_e_end, @return == 0 when internal buffers are fully flushed and frame is completed.
+ *  - after a ZSTD_e_end directive, if internal buffer is not fully flushed (@return != 0),
+ *            only ZSTD_e_end or ZSTD_e_flush operations are allowed.
+ *            Before starting a new compression job, or changing compression parameters,
+ *            it is required to fully flush internal buffers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2( ZSTD_CCtx* cctx,
+                                         ZSTD_outBuffer* output,
+                                         ZSTD_inBuffer* input,
+                                         ZSTD_EndDirective endOp);
+
+
+
+/* ============================== */
+/*   Advanced decompression API   */
+/* ============================== */
+
+/* The advanced API pushes parameters one by one into an existing DCtx context.
+ * Parameters are sticky, and remain valid for all following frames
+ * using the same DCtx context.
+ * It's possible to reset parameters to default values using ZSTD_DCtx_reset().
+ * Note : This API is compatible with existing ZSTD_decompressDCtx() and ZSTD_decompressStream().
+ *        Therefore, no new decompression function is necessary.
+ */
+
+
+typedef enum {
+
+    ZSTD_d_windowLogMax=100, /* Select a size limit (in power of 2) beyond which
+                              * the streaming API will refuse to allocate memory buffer
+                              * in order to protect the host from unreasonable memory requirements.
+                              * This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+                              * By default, a decompression context accepts window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT) */
+
+    /* note : additional experimental parameters are also available
+     * within the experimental section of the API.
+     * At the time of this writing, they include :
+     * ZSTD_c_format
+     * Because they are not stable, it's necessary to define ZSTD_STATIC_LINKING_ONLY to access them.
+     * note : never ever use experimentalParam? names directly
+     */
+     ZSTD_d_experimentalParam1=1000
+
+} ZSTD_dParameter;
+
+
+/*! ZSTD_dParam_getBounds() :
+ *  All parameters must belong to an interval with lower and upper bounds,
+ *  otherwise they will either trigger an error or be automatically clamped.
+ * @return : a structure, ZSTD_bounds, which contains
+ *         - an error status field, which must be tested using ZSTD_isError()
+ *         - both lower and upper bounds, inclusive
+ */
+ZSTDLIB_API ZSTD_bounds ZSTD_dParam_getBounds(ZSTD_dParameter dParam);
+
+/*! ZSTD_DCtx_setParameter() :
+ *  Set one compression parameter, selected by enum ZSTD_dParameter.
+ *  All parameters have valid bounds. Bounds can be queried using ZSTD_dParam_getBounds().
+ *  Providing a value beyond bound will either clamp it, or trigger an error (depending on parameter).
+ *  Setting a parameter is only possible during frame initialization (before starting decompression).
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setParameter(ZSTD_DCtx* dctx, ZSTD_dParameter param, int value);
+
+
+/*! ZSTD_DCtx_loadDictionary() :
+ *  Create an internal DDict from dict buffer,
+ *  to be used to decompress next frames.
+ *  The dictionary remains valid for all future frames, until explicitly invalidated.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Special : Adding a NULL (or 0-size) dictionary invalidates any previous dictionary,
+ *            meaning "return to no-dictionary mode".
+ *  Note 1 : Loading a dictionary involves building tables,
+ *           which has a non-negligible impact on CPU usage and latency.
+ *           It's recommended to "load once, use many times", to amortize the cost
+ *  Note 2 :`dict` content will be copied internally, so `dict` can be released after loading.
+ *           Use ZSTD_DCtx_loadDictionary_byReference() to reference dictionary content instead.
+ *  Note 3 : Use ZSTD_DCtx_loadDictionary_advanced() to take control of
+ *           how dictionary content is loaded and interpreted.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_refDDict() :
+ *  Reference a prepared dictionary, to be used to decompress next frames.
+ *  The dictionary remains active for decompression of future frames using same DCtx.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Currently, only one dictionary can be managed.
+ *           Referencing a new dictionary effectively "discards" any previous one.
+ *  Special: referencing a NULL DDict means "return to no-dictionary mode".
+ *  Note 2 : DDict is just referenced, its lifetime must outlive its usage from DCtx.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+/*! ZSTD_DCtx_refPrefix() :
+ *  Reference a prefix (single-usage dictionary) to decompress next frame.
+ *  This is the reverse operation of ZSTD_CCtx_refPrefix(),
+ *  and must use the same prefix as the one used during compression.
+ *  Prefix is **only used once**. Reference is discarded at end of frame.
+ *  End of frame is reached when ZSTD_decompressStream() returns 0.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ *  Note 1 : Adding any prefix (including NULL) invalidates any previously set prefix or dictionary
+ *  Note 2 : Prefix buffer is referenced. It **must** outlive decompression.
+ *           Prefix buffer must remain unmodified up to the end of frame,
+ *           reached when ZSTD_decompressStream() returns 0.
+ *  Note 3 : By default, the prefix is treated as raw content (ZSTD_dm_rawContent).
+ *           Use ZSTD_CCtx_refPrefix_advanced() to alter dictMode (Experimental section)
+ *  Note 4 : Referencing a raw content prefix has almost no cpu nor memory cost.
+ *           A full dictionary is more costly, as it requires building tables.
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix(ZSTD_DCtx* dctx,
+                                 const void* prefix, size_t prefixSize);
+
+/*! ZSTD_DCtx_reset() :
+ *  Return a DCtx to clean state.
+ *  Session and parameters can be reset jointly or separately.
+ *  Parameters can only be reset when no active frame is being decompressed.
+ * @return : 0, or an error code, which can be tested with ZSTD_isError()
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_reset(ZSTD_DCtx* dctx, ZSTD_ResetDirective reset);
+
+
+
+/****************************************************************************************
+ *   experimental API (static linking only)
+ ****************************************************************************************
+ * The following symbols and constants
+ * are not planned to join "stable API" status in the near future.
+ * They can still change in future versions.
+ * Some of them are planned to remain in the static_only section indefinitely.
+ * Some of them might be removed in the future (especially when redundant with existing stable functions)
+ * ***************************************************************************************/
+
+#define ZSTD_FRAMEHEADERSIZE_PREFIX 5   /* minimum input size required to query frame header size */
+#define ZSTD_FRAMEHEADERSIZE_MIN    6
+#define ZSTD_FRAMEHEADERSIZE_MAX   18   /* can be useful for static allocation */
+#define ZSTD_SKIPPABLEHEADERSIZE    8
+
+/* compression parameter bounds */
+#define ZSTD_WINDOWLOG_MAX_32    30
+#define ZSTD_WINDOWLOG_MAX_64    31
+#define ZSTD_WINDOWLOG_MAX     ((int)(sizeof(size_t) == 4 ? ZSTD_WINDOWLOG_MAX_32 : ZSTD_WINDOWLOG_MAX_64))
+#define ZSTD_WINDOWLOG_MIN       10
+#define ZSTD_HASHLOG_MAX       ((ZSTD_WINDOWLOG_MAX < 30) ? ZSTD_WINDOWLOG_MAX : 30)
+#define ZSTD_HASHLOG_MIN          6
+#define ZSTD_CHAINLOG_MAX_32     29
+#define ZSTD_CHAINLOG_MAX_64     30
+#define ZSTD_CHAINLOG_MAX      ((int)(sizeof(size_t) == 4 ? ZSTD_CHAINLOG_MAX_32 : ZSTD_CHAINLOG_MAX_64))
+#define ZSTD_CHAINLOG_MIN        ZSTD_HASHLOG_MIN
+#define ZSTD_SEARCHLOG_MAX      (ZSTD_WINDOWLOG_MAX-1)
+#define ZSTD_SEARCHLOG_MIN        1
+#define ZSTD_MINMATCH_MAX         7   /* only for ZSTD_fast, other strategies are limited to 6 */
+#define ZSTD_MINMATCH_MIN         3   /* only for ZSTD_btopt+, faster strategies are limited to 4 */
+#define ZSTD_TARGETLENGTH_MAX    ZSTD_BLOCKSIZE_MAX
+#define ZSTD_TARGETLENGTH_MIN     0   /* note : comparing this constant to an unsigned results in a tautological test */
+#define ZSTD_STRATEGY_MIN        ZSTD_fast
+#define ZSTD_STRATEGY_MAX        ZSTD_btultra2
+
+
+#define ZSTD_OVERLAPLOG_MIN       0
+#define ZSTD_OVERLAPLOG_MAX       9
+
+#define ZSTD_WINDOWLOG_LIMIT_DEFAULT 27   /* by default, the streaming decoder will refuse any frame
+                                           * requiring larger than (1<<ZSTD_WINDOWLOG_LIMIT_DEFAULT) window size,
+                                           * to preserve host's memory from unreasonable requirements.
+                                           * This limit can be overriden using ZSTD_DCtx_setParameter(,ZSTD_d_windowLogMax,).
+                                           * The limit does not apply for one-pass decoders (such as ZSTD_decompress()), since no additional memory is allocated */
+
+
+/* LDM parameter bounds */
+#define ZSTD_LDM_HASHLOG_MIN      ZSTD_HASHLOG_MIN
+#define ZSTD_LDM_HASHLOG_MAX      ZSTD_HASHLOG_MAX
+#define ZSTD_LDM_MINMATCH_MIN        4
+#define ZSTD_LDM_MINMATCH_MAX     4096
+#define ZSTD_LDM_BUCKETSIZELOG_MIN   1
+#define ZSTD_LDM_BUCKETSIZELOG_MAX   8
+#define ZSTD_LDM_HASHRATELOG_MIN     0
+#define ZSTD_LDM_HASHRATELOG_MAX (ZSTD_WINDOWLOG_MAX - ZSTD_HASHLOG_MIN)
+
+/* internal */
+#define ZSTD_HASHLOG3_MAX           17
+
+
+/* ---  Advanced types  --- */
+
+typedef struct ZSTD_CCtx_params_s ZSTD_CCtx_params;
+
+typedef struct {
+    unsigned windowLog;       /**< largest match distance : larger == more compression, more memory needed during decompression */
+    unsigned chainLog;        /**< fully searched segment : larger == more compression, slower, more memory (useless for fast) */
+    unsigned hashLog;         /**< dispatch table : larger == faster, more memory */
+    unsigned searchLog;       /**< nb of searches : larger == more compression, slower */
+    unsigned minMatch;        /**< match length searched : larger == faster decompression, sometimes less compression */
+    unsigned targetLength;    /**< acceptable match size for optimal parser (only) : larger == more compression, slower */
+    ZSTD_strategy strategy;   /**< see ZSTD_strategy definition above */
+} ZSTD_compressionParameters;
+
+typedef struct {
+    int contentSizeFlag; /**< 1: content size will be in frame header (when known) */
+    int checksumFlag;    /**< 1: generate a 32-bits checksum using XXH64 algorithm at end of frame, for error detection */
+    int noDictIDFlag;    /**< 1: no dictID will be saved into frame header (dictID is only useful for dictionary compression) */
+} ZSTD_frameParameters;
+
+typedef struct {
+    ZSTD_compressionParameters cParams;
+    ZSTD_frameParameters fParams;
+} ZSTD_parameters;
+
+typedef enum {
+    ZSTD_dct_auto = 0,       /* dictionary is "full" when starting with ZSTD_MAGIC_DICTIONARY, otherwise it is "rawContent" */
+    ZSTD_dct_rawContent = 1, /* ensures dictionary is always loaded as rawContent, even if it starts with ZSTD_MAGIC_DICTIONARY */
+    ZSTD_dct_fullDict = 2    /* refuses to load a dictionary if it does not respect Zstandard's specification, starting with ZSTD_MAGIC_DICTIONARY */
+} ZSTD_dictContentType_e;
+
+typedef enum {
+    ZSTD_dlm_byCopy = 0,  /**< Copy dictionary content internally */
+    ZSTD_dlm_byRef = 1,   /**< Reference dictionary content -- the dictionary buffer must outlive its users. */
+} ZSTD_dictLoadMethod_e;
+
+typedef enum {
+    /* Opened question : should we have a format ZSTD_f_auto ?
+     * Today, it would mean exactly the same as ZSTD_f_zstd1.
+     * But, in the future, should several formats become supported,
+     * on the compression side, it would mean "default format".
+     * On the decompression side, it would mean "automatic format detection",
+     * so that ZSTD_f_zstd1 would mean "accept *only* zstd frames".
+     * Since meaning is a little different, another option could be to define different enums for compression and decompression.
+     * This question could be kept for later, when there are actually multiple formats to support,
+     * but there is also the question of pinning enum values, and pinning value `0` is especially important */
+    ZSTD_f_zstd1 = 0,           /* zstd frame format, specified in zstd_compression_format.md (default) */
+    ZSTD_f_zstd1_magicless = 1, /* Variant of zstd frame format, without initial 4-bytes magic number.
+                                 * Useful to save 4 bytes per generated frame.
+                                 * Decoder cannot recognise automatically this format, requiring this instruction. */
+} ZSTD_format_e;
+
+typedef enum {
+    /* Note: this enum and the behavior it controls are effectively internal
+     * implementation details of the compressor. They are expected to continue
+     * to evolve and should be considered only in the context of extremely
+     * advanced performance tuning.
+     *
+     * Zstd currently supports the use of a CDict in two ways:
+     *
+     * - The contents of the CDict can be copied into the working context. This
+     *   means that the compression can search both the dictionary and input
+     *   while operating on a single set of internal tables. This makes
+     *   the compression faster per-byte of input. However, the initial copy of
+     *   the CDict's tables incurs a fixed cost at the beginning of the
+     *   compression. For small compressions (< 8 KB), that copy can dominate
+     *   the cost of the compression.
+     *
+     * - The CDict's tables can be used in-place. In this model, compression is
+     *   slower per input byte, because the compressor has to search two sets of
+     *   tables. However, this model incurs no start-up cost (as long as the
+     *   working context's tables can be reused). For small inputs, this can be
+     *   faster than copying the CDict's tables.
+     *
+     * Zstd has a simple internal heuristic that selects which strategy to use
+     * at the beginning of a compression. However, if experimentation shows that
+     * Zstd is making poor choices, it is possible to override that choice with
+     * this enum.
+     */
+    ZSTD_dictDefaultAttach = 0, /* Use the default heuristic. */
+    ZSTD_dictForceAttach   = 1, /* Never copy the dictionary. */
+    ZSTD_dictForceCopy     = 2, /* Always copy the dictionary. */
+} ZSTD_dictAttachPref_e;
+
+
+/***************************************
+*  Frame size functions
+***************************************/
+
+/*! ZSTD_findDecompressedSize() :
+ *  `src` should point the start of a series of ZSTD encoded and/or skippable frames
+ *  `srcSize` must be the _exact_ size of this series
+ *       (i.e. there should be a frame boundary exactly at `srcSize` bytes after `src`)
+ *  @return : - decompressed size of all data in all successive frames
+ *            - if the decompressed size cannot be determined: ZSTD_CONTENTSIZE_UNKNOWN
+ *            - if an error occurred: ZSTD_CONTENTSIZE_ERROR
+ *
+ *   note 1 : decompressed size is an optional field, that may not be present, especially in streaming mode.
+ *            When `return==ZSTD_CONTENTSIZE_UNKNOWN`, data to decompress could be any size.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 2 : decompressed size is always present when compression is done with ZSTD_compress()
+ *   note 3 : decompressed size can be very large (64-bits value),
+ *            potentially larger than what local system can handle as a single memory segment.
+ *            In which case, it's necessary to use streaming mode to decompress data.
+ *   note 4 : If source is untrusted, decompressed size could be wrong or intentionally modified.
+ *            Always ensure result fits within application's authorized limits.
+ *            Each application can set its own limits.
+ *   note 5 : ZSTD_findDecompressedSize handles multiple frames, and so it must traverse the input to
+ *            read each contained frame header.  This is fast as most of the data is skipped,
+ *            however it does mean that all frame data must be present and valid. */
+ZSTDLIB_API unsigned long long ZSTD_findDecompressedSize(const void* src, size_t srcSize);
+
+/*! ZSTD_frameHeaderSize() :
+ *  srcSize must be >= ZSTD_FRAMEHEADERSIZE_PREFIX.
+ * @return : size of the Frame Header,
+ *           or an error code (if srcSize is too small) */
+ZSTDLIB_API size_t ZSTD_frameHeaderSize(const void* src, size_t srcSize);
+
+
+/***************************************
+*  Memory management
+***************************************/
+
+/*! ZSTD_estimate*() :
+ *  These functions make it possible to estimate memory usage
+ *  of a future {D,C}Ctx, before its creation.
+ *  ZSTD_estimateCCtxSize() will provide a budget large enough for any compression level up to selected one.
+ *  It will also consider src size to be arbitrarily "large", which is worst case.
+ *  If srcSize is known to always be small, ZSTD_estimateCCtxSize_usingCParams() can provide a tighter estimation.
+ *  ZSTD_estimateCCtxSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
+ *  ZSTD_estimateCCtxSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  Note : CCtx size estimation is only correct for single-threaded compression. */
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize(int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_API size_t ZSTD_estimateCCtxSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_API size_t ZSTD_estimateDCtxSize(void);
+
+/*! ZSTD_estimateCStreamSize() :
+ *  ZSTD_estimateCStreamSize() will provide a budget large enough for any compression level up to selected one.
+ *  It will also consider src size to be arbitrarily "large", which is worst case.
+ *  If srcSize is known to always be small, ZSTD_estimateCStreamSize_usingCParams() can provide a tighter estimation.
+ *  ZSTD_estimateCStreamSize_usingCParams() can be used in tandem with ZSTD_getCParams() to create cParams from compressionLevel.
+ *  ZSTD_estimateCStreamSize_usingCCtxParams() can be used in tandem with ZSTD_CCtxParam_setParameter(). Only single-threaded compression is supported. This function will return an error code if ZSTD_c_nbWorkers is >= 1.
+ *  Note : CStream size estimation is only correct for single-threaded compression.
+ *  ZSTD_DStream memory budget depends on window Size.
+ *  This information can be passed manually, using ZSTD_estimateDStreamSize,
+ *  or deducted from a valid frame Header, using ZSTD_estimateDStreamSize_fromFrame();
+ *  Note : if streaming is init with function ZSTD_init?Stream_usingDict(),
+ *         an internal ?Dict will be created, which additional size is not estimated here.
+ *         In this case, get total size by adding ZSTD_estimate?DictSize */
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize(int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCParams(ZSTD_compressionParameters cParams);
+ZSTDLIB_API size_t ZSTD_estimateCStreamSize_usingCCtxParams(const ZSTD_CCtx_params* params);
+ZSTDLIB_API size_t ZSTD_estimateDStreamSize(size_t windowSize);
+ZSTDLIB_API size_t ZSTD_estimateDStreamSize_fromFrame(const void* src, size_t srcSize);
+
+/*! ZSTD_estimate?DictSize() :
+ *  ZSTD_estimateCDictSize() will bet that src size is relatively "small", and content is copied, like ZSTD_createCDict().
+ *  ZSTD_estimateCDictSize_advanced() makes it possible to control compression parameters precisely, like ZSTD_createCDict_advanced().
+ *  Note : dictionaries created by reference (`ZSTD_dlm_byRef`) are logically smaller.
+ */
+ZSTDLIB_API size_t ZSTD_estimateCDictSize(size_t dictSize, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_estimateCDictSize_advanced(size_t dictSize, ZSTD_compressionParameters cParams, ZSTD_dictLoadMethod_e dictLoadMethod);
+ZSTDLIB_API size_t ZSTD_estimateDDictSize(size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod);
+
+/*! ZSTD_initStatic*() :
+ *  Initialize an object using a pre-allocated fixed-size buffer.
+ *  workspace: The memory area to emplace the object into.
+ *             Provided pointer *must be 8-bytes aligned*.
+ *             Buffer must outlive object.
+ *  workspaceSize: Use ZSTD_estimate*Size() to determine
+ *                 how large workspace must be to support target scenario.
+ * @return : pointer to object (same address as workspace, just different type),
+ *           or NULL if error (size too small, incorrect alignment, etc.)
+ *  Note : zstd will never resize nor malloc() when using a static buffer.
+ *         If the object requires more memory than available,
+ *         zstd will just error out (typically ZSTD_error_memory_allocation).
+ *  Note 2 : there is no corresponding "free" function.
+ *           Since workspace is allocated externally, it must be freed externally too.
+ *  Note 3 : cParams : use ZSTD_getCParams() to convert a compression level
+ *           into its associated cParams.
+ *  Limitation 1 : currently not compatible with internal dictionary creation, triggered by
+ *                 ZSTD_CCtx_loadDictionary(), ZSTD_initCStream_usingDict() or ZSTD_initDStream_usingDict().
+ *  Limitation 2 : static cctx currently not compatible with multi-threading.
+ *  Limitation 3 : static dctx is incompatible with legacy support.
+ */
+ZSTDLIB_API ZSTD_CCtx*    ZSTD_initStaticCCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_API ZSTD_CStream* ZSTD_initStaticCStream(void* workspace, size_t workspaceSize);    /**< same as ZSTD_initStaticCCtx() */
+
+ZSTDLIB_API ZSTD_DCtx*    ZSTD_initStaticDCtx(void* workspace, size_t workspaceSize);
+ZSTDLIB_API ZSTD_DStream* ZSTD_initStaticDStream(void* workspace, size_t workspaceSize);    /**< same as ZSTD_initStaticDCtx() */
+
+ZSTDLIB_API const ZSTD_CDict* ZSTD_initStaticCDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType,
+                                        ZSTD_compressionParameters cParams);
+
+ZSTDLIB_API const ZSTD_DDict* ZSTD_initStaticDDict(
+                                        void* workspace, size_t workspaceSize,
+                                        const void* dict, size_t dictSize,
+                                        ZSTD_dictLoadMethod_e dictLoadMethod,
+                                        ZSTD_dictContentType_e dictContentType);
+
+
+/*! Custom memory allocation :
+ *  These prototypes make it possible to pass your own allocation/free functions.
+ *  ZSTD_customMem is provided at creation time, using ZSTD_create*_advanced() variants listed below.
+ *  All allocation/free operations will be completed using these custom variants instead of regular <stdlib.h> ones.
+ */
+typedef void* (*ZSTD_allocFunction) (void* opaque, size_t size);
+typedef void  (*ZSTD_freeFunction) (void* opaque, void* address);
+typedef struct { ZSTD_allocFunction customAlloc; ZSTD_freeFunction customFree; void* opaque; } ZSTD_customMem;
+static ZSTD_customMem const ZSTD_defaultCMem = { NULL, NULL, NULL };  /**< this constant defers to stdlib's functions */
+
+ZSTDLIB_API ZSTD_CCtx*    ZSTD_createCCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_CStream* ZSTD_createCStream_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_DCtx*    ZSTD_createDCtx_advanced(ZSTD_customMem customMem);
+ZSTDLIB_API ZSTD_DStream* ZSTD_createDStream_advanced(ZSTD_customMem customMem);
+
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_advanced(const void* dict, size_t dictSize,
+                                                  ZSTD_dictLoadMethod_e dictLoadMethod,
+                                                  ZSTD_dictContentType_e dictContentType,
+                                                  ZSTD_compressionParameters cParams,
+                                                  ZSTD_customMem customMem);
+
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_advanced(const void* dict, size_t dictSize,
+                                                  ZSTD_dictLoadMethod_e dictLoadMethod,
+                                                  ZSTD_dictContentType_e dictContentType,
+                                                  ZSTD_customMem customMem);
+
+
+
+/***************************************
+*  Advanced compression functions
+***************************************/
+
+/*! ZSTD_createCDict_byReference() :
+ *  Create a digested dictionary for compression
+ *  Dictionary content is just referenced, not duplicated.
+ *  As a consequence, `dictBuffer` **must** outlive CDict,
+ *  and its content must remain unmodified throughout the lifetime of CDict. */
+ZSTDLIB_API ZSTD_CDict* ZSTD_createCDict_byReference(const void* dictBuffer, size_t dictSize, int compressionLevel);
+
+/*! ZSTD_getCParams() :
+*   @return ZSTD_compressionParameters structure for a selected compression level and estimated srcSize.
+*   `estimatedSrcSize` value is optional, select 0 if not known */
+ZSTDLIB_API ZSTD_compressionParameters ZSTD_getCParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_getParams() :
+*   same as ZSTD_getCParams(), but @return a full `ZSTD_parameters` object instead of sub-component `ZSTD_compressionParameters`.
+*   All fields of `ZSTD_frameParameters` are set to default : contentSize=1, checksum=0, noDictID=0 */
+ZSTDLIB_API ZSTD_parameters ZSTD_getParams(int compressionLevel, unsigned long long estimatedSrcSize, size_t dictSize);
+
+/*! ZSTD_checkCParams() :
+*   Ensure param values remain within authorized range */
+ZSTDLIB_API size_t ZSTD_checkCParams(ZSTD_compressionParameters params);
+
+/*! ZSTD_adjustCParams() :
+ *  optimize params for a given `srcSize` and `dictSize`.
+ *  both values are optional, select `0` if unknown. */
+ZSTDLIB_API ZSTD_compressionParameters ZSTD_adjustCParams(ZSTD_compressionParameters cPar, unsigned long long srcSize, size_t dictSize);
+
+/*! ZSTD_compress_advanced() :
+ *  Same as ZSTD_compress_usingDict(), with fine-tune control over compression parameters (by structure) */
+ZSTDLIB_API size_t ZSTD_compress_advanced(ZSTD_CCtx* cctx,
+                                          void* dst, size_t dstCapacity,
+                                    const void* src, size_t srcSize,
+                                    const void* dict,size_t dictSize,
+                                          ZSTD_parameters params);
+
+/*! ZSTD_compress_usingCDict_advanced() :
+ *  Same as ZSTD_compress_usingCDict(), with fine-tune control over frame parameters */
+ZSTDLIB_API size_t ZSTD_compress_usingCDict_advanced(ZSTD_CCtx* cctx,
+                                              void* dst, size_t dstCapacity,
+                                        const void* src, size_t srcSize,
+                                        const ZSTD_CDict* cdict,
+                                              ZSTD_frameParameters fParams);
+
+
+/*! ZSTD_CCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but dictionary content is referenced, instead of being copied into CCtx.
+ *  It saves some memory, but also requires that `dict` outlives its usage within `cctx` */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_byReference(ZSTD_CCtx* cctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_CCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_CCtx_loadDictionary(), but gives finer control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_loadDictionary_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_CCtx_refPrefix_advanced() :
+ *  Same as ZSTD_CCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_CCtx_refPrefix_advanced(ZSTD_CCtx* cctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/* ===   experimental parameters   === */
+/* these parameters can be used with ZSTD_setParameter()
+ * they are not guaranteed to remain supported in the future */
+
+ /* Enables rsyncable mode,
+  * which makes compressed files more rsync friendly
+  * by adding periodic synchronization points to the compressed data.
+  * The target average block size is ZSTD_c_jobSize / 2.
+  * It's possible to modify the job size to increase or decrease
+  * the granularity of the synchronization point.
+  * Once the jobSize is smaller than the window size,
+  * it will result in compression ratio degradation.
+  * NOTE 1: rsyncable mode only works when multithreading is enabled.
+  * NOTE 2: rsyncable performs poorly in combination with long range mode,
+  * since it will decrease the effectiveness of synchronization points,
+  * though mileage may vary.
+  * NOTE 3: Rsyncable mode limits maximum compression speed to ~400 MB/s.
+  * If the selected compression level is already running significantly slower,
+  * the overall speed won't be significantly impacted.
+  */
+ #define ZSTD_c_rsyncable ZSTD_c_experimentalParam1
+
+/* Select a compression format.
+ * The value must be of type ZSTD_format_e.
+ * See ZSTD_format_e enum definition for details */
+#define ZSTD_c_format ZSTD_c_experimentalParam2
+
+/* Force back-reference distances to remain < windowSize,
+ * even when referencing into Dictionary content (default:0) */
+#define ZSTD_c_forceMaxWindow ZSTD_c_experimentalParam3
+
+/* Controls whether the contents of a CDict
+ * are used in place, or copied into the working context.
+ * Accepts values from the ZSTD_dictAttachPref_e enum.
+ * See the comments on that enum for an explanation of the feature. */
+#define ZSTD_c_forceAttachDict ZSTD_c_experimentalParam4
+
+/*! ZSTD_CCtx_getParameter() :
+ *  Get the requested compression parameter value, selected by enum ZSTD_cParameter,
+ *  and store it into int* value.
+ * @return : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_getParameter(ZSTD_CCtx* cctx, ZSTD_cParameter param, int* value);
+
+
+/*! ZSTD_CCtx_params :
+ *  Quick howto :
+ *  - ZSTD_createCCtxParams() : Create a ZSTD_CCtx_params structure
+ *  - ZSTD_CCtxParam_setParameter() : Push parameters one by one into
+ *                                    an existing ZSTD_CCtx_params structure.
+ *                                    This is similar to
+ *                                    ZSTD_CCtx_setParameter().
+ *  - ZSTD_CCtx_setParametersUsingCCtxParams() : Apply parameters to
+ *                                    an existing CCtx.
+ *                                    These parameters will be applied to
+ *                                    all subsequent frames.
+ *  - ZSTD_compressStream2() : Do compression using the CCtx.
+ *  - ZSTD_freeCCtxParams() : Free the memory.
+ *
+ *  This can be used with ZSTD_estimateCCtxSize_advanced_usingCCtxParams()
+ *  for static allocation of CCtx for single-threaded compression.
+ */
+ZSTDLIB_API ZSTD_CCtx_params* ZSTD_createCCtxParams(void);
+ZSTDLIB_API size_t ZSTD_freeCCtxParams(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_reset() :
+ *  Reset params to default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_reset(ZSTD_CCtx_params* params);
+
+/*! ZSTD_CCtxParams_init() :
+ *  Initializes the compression parameters of cctxParams according to
+ *  compression level. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init(ZSTD_CCtx_params* cctxParams, int compressionLevel);
+
+/*! ZSTD_CCtxParams_init_advanced() :
+ *  Initializes the compression and frame parameters of cctxParams according to
+ *  params. All other parameters are reset to their default values.
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParams_init_advanced(ZSTD_CCtx_params* cctxParams, ZSTD_parameters params);
+
+/*! ZSTD_CCtxParam_setParameter() :
+ *  Similar to ZSTD_CCtx_setParameter.
+ *  Set one compression parameter, selected by enum ZSTD_cParameter.
+ *  Parameters must be applied to a ZSTD_CCtx using ZSTD_CCtx_setParametersUsingCCtxParams().
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParam_setParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int value);
+
+/*! ZSTD_CCtxParam_getParameter() :
+ * Similar to ZSTD_CCtx_getParameter.
+ * Get the requested value of one compression parameter, selected by enum ZSTD_cParameter.
+ * @result : 0, or an error code (which can be tested with ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_CCtxParam_getParameter(ZSTD_CCtx_params* params, ZSTD_cParameter param, int* value);
+
+/*! ZSTD_CCtx_setParametersUsingCCtxParams() :
+ *  Apply a set of ZSTD_CCtx_params to the compression context.
+ *  This can be done even after compression is started,
+ *    if nbWorkers==0, this will have no impact until a new compression is started.
+ *    if nbWorkers>=1, new parameters will be picked up at next job,
+ *       with a few restrictions (windowLog, pledgedSrcSize, nbWorkers, jobSize, and overlapLog are not updated).
+ */
+ZSTDLIB_API size_t ZSTD_CCtx_setParametersUsingCCtxParams(
+        ZSTD_CCtx* cctx, const ZSTD_CCtx_params* params);
+
+/*! ZSTD_compressStream2_simpleArgs() :
+ *  Same as ZSTD_compressStream2(),
+ *  but using only integral types as arguments.
+ *  This variant might be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_compressStream2_simpleArgs (
+                            ZSTD_CCtx* cctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos,
+                            ZSTD_EndDirective endOp);
+
+
+/***************************************
+*  Advanced decompression functions
+***************************************/
+
+/*! ZSTD_isFrame() :
+ *  Tells if the content of `buffer` starts with a valid Frame Identifier.
+ *  Note : Frame Identifier is 4 bytes. If `size < 4`, @return will always be 0.
+ *  Note 2 : Legacy Frame Identifiers are considered valid only if Legacy Support is enabled.
+ *  Note 3 : Skippable Frame Identifiers are considered valid. */
+ZSTDLIB_API unsigned ZSTD_isFrame(const void* buffer, size_t size);
+
+/*! ZSTD_createDDict_byReference() :
+ *  Create a digested dictionary, ready to start decompression operation without startup delay.
+ *  Dictionary content is referenced, and therefore stays in dictBuffer.
+ *  It is important that dictBuffer outlives DDict,
+ *  it must remain read accessible throughout the lifetime of DDict */
+ZSTDLIB_API ZSTD_DDict* ZSTD_createDDict_byReference(const void* dictBuffer, size_t dictSize);
+
+
+/*! ZSTD_getDictID_fromDict() :
+ *  Provides the dictID stored within dictionary.
+ *  if @return == 0, the dictionary is not conformant with Zstandard specification.
+ *  It can still be loaded, but as a content-only dictionary. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDict(const void* dict, size_t dictSize);
+
+/*! ZSTD_getDictID_fromDDict() :
+ *  Provides the dictID of the dictionary loaded into `ddict`.
+ *  If @return == 0, the dictionary is not conformant to Zstandard specification, or empty.
+ *  Non-conformant dictionaries can still be loaded, but as content-only dictionaries. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromDDict(const ZSTD_DDict* ddict);
+
+/*! ZSTD_getDictID_fromFrame() :
+ *  Provides the dictID required to decompressed the frame stored within `src`.
+ *  If @return == 0, the dictID could not be decoded.
+ *  This could for one of the following reasons :
+ *  - The frame does not require a dictionary to be decoded (most common case).
+ *  - The frame was built with dictID intentionally removed. Whatever dictionary is necessary is a hidden information.
+ *    Note : this use case also happens when using a non-conformant dictionary.
+ *  - `srcSize` is too small, and as a result, the frame header could not be decoded (only possible if `srcSize < ZSTD_FRAMEHEADERSIZE_MAX`).
+ *  - This is not a Zstandard frame.
+ *  When identifying the exact failure cause, it's possible to use ZSTD_getFrameHeader(), which will provide a more precise error code. */
+ZSTDLIB_API unsigned ZSTD_getDictID_fromFrame(const void* src, size_t srcSize);
+
+/*! ZSTD_DCtx_loadDictionary_byReference() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but references `dict` content instead of copying it into `dctx`.
+ *  This saves memory if `dict` remains around.,
+ *  However, it's imperative that `dict` remains accessible (and unmodified) while being used, so it must outlive decompression. */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_byReference(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+
+/*! ZSTD_DCtx_loadDictionary_advanced() :
+ *  Same as ZSTD_DCtx_loadDictionary(),
+ *  but gives direct control over
+ *  how to load the dictionary (by copy ? by reference ?)
+ *  and how to interpret it (automatic ? force raw mode ? full mode only ?). */
+ZSTDLIB_API size_t ZSTD_DCtx_loadDictionary_advanced(ZSTD_DCtx* dctx, const void* dict, size_t dictSize, ZSTD_dictLoadMethod_e dictLoadMethod, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_refPrefix_advanced() :
+ *  Same as ZSTD_DCtx_refPrefix(), but gives finer control over
+ *  how to interpret prefix content (automatic ? force raw mode (default) ? full mode only ?) */
+ZSTDLIB_API size_t ZSTD_DCtx_refPrefix_advanced(ZSTD_DCtx* dctx, const void* prefix, size_t prefixSize, ZSTD_dictContentType_e dictContentType);
+
+/*! ZSTD_DCtx_setMaxWindowSize() :
+ *  Refuses allocating internal buffers for frames requiring a window size larger than provided limit.
+ *  This protects a decoder context from reserving too much memory for itself (potential attack scenario).
+ *  This parameter is only useful in streaming mode, since no internal buffer is allocated in single-pass mode.
+ *  By default, a decompression context accepts all window sizes <= (1 << ZSTD_WINDOWLOG_LIMIT_DEFAULT)
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()).
+ */
+ZSTDLIB_API size_t ZSTD_DCtx_setMaxWindowSize(ZSTD_DCtx* dctx, size_t maxWindowSize);
+
+/* ZSTD_d_format
+ * experimental parameter,
+ * allowing selection between ZSTD_format_e input compression formats
+ */
+#define ZSTD_d_format ZSTD_d_experimentalParam1
+
+/*! ZSTD_DCtx_setFormat() :
+ *  Instruct the decoder context about what kind of data to decode next.
+ *  This instruction is mandatory to decode data without a fully-formed header,
+ *  such ZSTD_f_zstd1_magicless for example.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError()). */
+ZSTDLIB_API size_t ZSTD_DCtx_setFormat(ZSTD_DCtx* dctx, ZSTD_format_e format);
+
+/*! ZSTD_decompressStream_simpleArgs() :
+ *  Same as ZSTD_decompressStream(),
+ *  but using only integral types as arguments.
+ *  This can be helpful for binders from dynamic languages
+ *  which have troubles handling structures containing memory pointers.
+ */
+ZSTDLIB_API size_t ZSTD_decompressStream_simpleArgs (
+                            ZSTD_DCtx* dctx,
+                            void* dst, size_t dstCapacity, size_t* dstPos,
+                      const void* src, size_t srcSize, size_t* srcPos);
+
+
+/********************************************************************
+*  Advanced streaming functions
+*  Warning : most of these functions are now redundant with the Advanced API.
+*  Once Advanced API reaches "stable" status,
+*  redundant functions will be deprecated, and then at some point removed.
+********************************************************************/
+
+/*=====   Advanced Streaming compression functions  =====*/
+ZSTDLIB_API size_t ZSTD_initCStream_srcSize(ZSTD_CStream* zcs, int compressionLevel, unsigned long long pledgedSrcSize);   /**< pledgedSrcSize must be correct. If it is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN. Note that, for compatibility with older programs, "0" also disables frame content size field. It may be enabled in the future. */
+ZSTDLIB_API size_t ZSTD_initCStream_usingDict(ZSTD_CStream* zcs, const void* dict, size_t dictSize, int compressionLevel); /**< creates of an internal CDict (incompatible with static CCtx), except if dict == NULL or dictSize < 8, in which case no dict is used. Note: dict is loaded with ZSTD_dm_auto (treated as a full zstd dictionary if it begins with ZSTD_MAGIC_DICTIONARY, else as raw content) and ZSTD_dlm_byCopy.*/
+ZSTDLIB_API size_t ZSTD_initCStream_advanced(ZSTD_CStream* zcs, const void* dict, size_t dictSize,
+                                             ZSTD_parameters params, unsigned long long pledgedSrcSize);  /**< pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. dict is loaded with ZSTD_dm_auto and ZSTD_dlm_byCopy. */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict(ZSTD_CStream* zcs, const ZSTD_CDict* cdict);  /**< note : cdict will just be referenced, and must outlive compression session */
+ZSTDLIB_API size_t ZSTD_initCStream_usingCDict_advanced(ZSTD_CStream* zcs, const ZSTD_CDict* cdict, ZSTD_frameParameters fParams, unsigned long long pledgedSrcSize);  /**< same as ZSTD_initCStream_usingCDict(), with control over frame parameters. pledgedSrcSize must be correct. If srcSize is not known at init time, use value ZSTD_CONTENTSIZE_UNKNOWN. */
+
+/*! ZSTD_resetCStream() :
+ *  start a new frame, using same parameters from previous frame.
+ *  This is typically useful to skip dictionary loading stage, since it will re-use it in-place.
+ *  Note that zcs must be init at least once before using ZSTD_resetCStream().
+ *  If pledgedSrcSize is not known at reset time, use macro ZSTD_CONTENTSIZE_UNKNOWN.
+ *  If pledgedSrcSize > 0, its value must be correct, as it will be written in header, and controlled at the end.
+ *  For the time being, pledgedSrcSize==0 is interpreted as "srcSize unknown" for compatibility with older programs,
+ *  but it will change to mean "empty" in future version, so use macro ZSTD_CONTENTSIZE_UNKNOWN instead.
+ * @return : 0, or an error code (which can be tested using ZSTD_isError())
+ */
+ZSTDLIB_API size_t ZSTD_resetCStream(ZSTD_CStream* zcs, unsigned long long pledgedSrcSize);
+
+
+typedef struct {
+    unsigned long long ingested;   /* nb input bytes read and buffered */
+    unsigned long long consumed;   /* nb input bytes actually compressed */
+    unsigned long long produced;   /* nb of compressed bytes generated and buffered */
+    unsigned long long flushed;    /* nb of compressed bytes flushed : not provided; can be tracked from caller side */
+    unsigned currentJobID;         /* MT only : latest started job nb */
+    unsigned nbActiveWorkers;      /* MT only : nb of workers actively compressing at probe time */
+} ZSTD_frameProgression;
+
+/* ZSTD_getFrameProgression() :
+ * tells how much data has been ingested (read from input)
+ * consumed (input actually compressed) and produced (output) for current frame.
+ * Note : (ingested - consumed) is amount of input data buffered internally, not yet compressed.
+ * Aggregates progression inside active worker threads.
+ */
+ZSTDLIB_API ZSTD_frameProgression ZSTD_getFrameProgression(const ZSTD_CCtx* cctx);
+
+/*! ZSTD_toFlushNow() :
+ *  Tell how many bytes are ready to be flushed immediately.
+ *  Useful for multithreading scenarios (nbWorkers >= 1).
+ *  Probe the oldest active job, defined as oldest job not yet entirely flushed,
+ *  and check its output buffer.
+ * @return : amount of data stored in oldest job and ready to be flushed immediately.
+ *  if @return == 0, it means either :
+ *  + there is no active job (could be checked with ZSTD_frameProgression()), or
+ *  + oldest job is still actively compressing data,
+ *    but everything it has produced has also been flushed so far,
+ *    therefore flush speed is limited by production speed of oldest job
+ *    irrespective of the speed of concurrent (and newer) jobs.
+ */
+ZSTDLIB_API size_t ZSTD_toFlushNow(ZSTD_CCtx* cctx);
+
+
+/*=====   Advanced Streaming decompression functions  =====*/
+ZSTDLIB_API size_t ZSTD_initDStream_usingDict(ZSTD_DStream* zds, const void* dict, size_t dictSize); /**< note: no dictionary will be used if dict == NULL or dictSize < 8 */
+ZSTDLIB_API size_t ZSTD_initDStream_usingDDict(ZSTD_DStream* zds, const ZSTD_DDict* ddict);  /**< note : ddict is referenced, it must outlive decompression session */
+ZSTDLIB_API size_t ZSTD_resetDStream(ZSTD_DStream* zds);  /**< re-use decompression parameters from previous init; saves dictionary loading */
+
+
+/*********************************************************************
+*  Buffer-less and synchronous inner streaming functions
+*
+*  This is an advanced API, giving full control over buffer management, for users which need direct control over memory.
+*  But it's also a complex one, with several restrictions, documented below.
+*  Prefer normal streaming API for an easier experience.
+********************************************************************* */
+
+/**
+  Buffer-less streaming compression (synchronous mode)
+
+  A ZSTD_CCtx object is required to track streaming operations.
+  Use ZSTD_createCCtx() / ZSTD_freeCCtx() to manage resource.
+  ZSTD_CCtx object can be re-used multiple times within successive compression operations.
+
+  Start by initializing a context.
+  Use ZSTD_compressBegin(), or ZSTD_compressBegin_usingDict() for dictionary compression,
+  or ZSTD_compressBegin_advanced(), for finer parameter control.
+  It's also possible to duplicate a reference context which has already been initialized, using ZSTD_copyCCtx()
+
+  Then, consume your input using ZSTD_compressContinue().
+  There are some important considerations to keep in mind when using this advanced function :
+  - ZSTD_compressContinue() has no internal buffer. It uses externally provided buffers only.
+  - Interface is synchronous : input is consumed entirely and produces 1+ compressed blocks.
+  - Caller must ensure there is enough space in `dst` to store compressed data under worst case scenario.
+    Worst case evaluation is provided by ZSTD_compressBound().
+    ZSTD_compressContinue() doesn't guarantee recover after a failed compression.
+  - ZSTD_compressContinue() presumes prior input ***is still accessible and unmodified*** (up to maximum distance size, see WindowLog).
+    It remembers all previous contiguous blocks, plus one separated memory segment (which can itself consists of multiple contiguous blocks)
+  - ZSTD_compressContinue() detects that prior input has been overwritten when `src` buffer overlaps.
+    In which case, it will "discard" the relevant memory section from its history.
+
+  Finish a frame with ZSTD_compressEnd(), which will write the last block(s) and optional checksum.
+  It's possible to use srcSize==0, in which case, it will write a final empty block to end the frame.
+  Without last block mark, frames are considered unfinished (hence corrupted) by compliant decoders.
+
+  `ZSTD_CCtx` object can be re-used (ZSTD_compressBegin()) to compress again.
+*/
+
+/*=====   Buffer-less streaming compression functions  =====*/
+ZSTDLIB_API size_t ZSTD_compressBegin(ZSTD_CCtx* cctx, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_compressBegin_usingDict(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, int compressionLevel);
+ZSTDLIB_API size_t ZSTD_compressBegin_advanced(ZSTD_CCtx* cctx, const void* dict, size_t dictSize, ZSTD_parameters params, unsigned long long pledgedSrcSize); /**< pledgedSrcSize : If srcSize is not known at init time, use ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict(ZSTD_CCtx* cctx, const ZSTD_CDict* cdict); /**< note: fails if cdict==NULL */
+ZSTDLIB_API size_t ZSTD_compressBegin_usingCDict_advanced(ZSTD_CCtx* const cctx, const ZSTD_CDict* const cdict, ZSTD_frameParameters const fParams, unsigned long long const pledgedSrcSize);   /* compression parameters are already set within cdict. pledgedSrcSize must be correct. If srcSize is not known, use macro ZSTD_CONTENTSIZE_UNKNOWN */
+ZSTDLIB_API size_t ZSTD_copyCCtx(ZSTD_CCtx* cctx, const ZSTD_CCtx* preparedCCtx, unsigned long long pledgedSrcSize); /**<  note: if pledgedSrcSize is not known, use ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_API size_t ZSTD_compressContinue(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_compressEnd(ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+
+/*-
+  Buffer-less streaming decompression (synchronous mode)
+
+  A ZSTD_DCtx object is required to track streaming operations.
+  Use ZSTD_createDCtx() / ZSTD_freeDCtx() to manage it.
+  A ZSTD_DCtx object can be re-used multiple times.
+
+  First typical operation is to retrieve frame parameters, using ZSTD_getFrameHeader().
+  Frame header is extracted from the beginning of compressed frame, so providing only the frame's beginning is enough.
+  Data fragment must be large enough to ensure successful decoding.
+ `ZSTD_frameHeaderSize_max` bytes is guaranteed to always be large enough.
+  @result : 0 : successful decoding, the `ZSTD_frameHeader` structure is correctly filled.
+           >0 : `srcSize` is too small, please provide at least @result bytes on next attempt.
+           errorCode, which can be tested using ZSTD_isError().
+
+  It fills a ZSTD_frameHeader structure with important information to correctly decode the frame,
+  such as the dictionary ID, content size, or maximum back-reference distance (`windowSize`).
+  Note that these values could be wrong, either because of data corruption, or because a 3rd party deliberately spoofs false information.
+  As a consequence, check that values remain within valid application range.
+  For example, do not allocate memory blindly, check that `windowSize` is within expectation.
+  Each application can set its own limits, depending on local restrictions.
+  For extended interoperability, it is recommended to support `windowSize` of at least 8 MB.
+
+  ZSTD_decompressContinue() needs previous data blocks during decompression, up to `windowSize` bytes.
+  ZSTD_decompressContinue() is very sensitive to contiguity,
+  if 2 blocks don't follow each other, make sure that either the compressor breaks contiguity at the same place,
+  or that previous contiguous segment is large enough to properly handle maximum back-reference distance.
+  There are multiple ways to guarantee this condition.
+
+  The most memory efficient way is to use a round buffer of sufficient size.
+  Sufficient size is determined by invoking ZSTD_decodingBufferSize_min(),
+  which can @return an error code if required value is too large for current system (in 32-bits mode).
+  In a round buffer methodology, ZSTD_decompressContinue() decompresses each block next to previous one,
+  up to the moment there is not enough room left in the buffer to guarantee decoding another full block,
+  which maximum size is provided in `ZSTD_frameHeader` structure, field `blockSizeMax`.
+  At which point, decoding can resume from the beginning of the buffer.
+  Note that already decoded data stored in the buffer should be flushed before being overwritten.
+
+  There are alternatives possible, for example using two or more buffers of size `windowSize` each, though they consume more memory.
+
+  Finally, if you control the compression process, you can also ignore all buffer size rules,
+  as long as the encoder and decoder progress in "lock-step",
+  aka use exactly the same buffer sizes, break contiguity at the same place, etc.
+
+  Once buffers are setup, start decompression, with ZSTD_decompressBegin().
+  If decompression requires a dictionary, use ZSTD_decompressBegin_usingDict() or ZSTD_decompressBegin_usingDDict().
+
+  Then use ZSTD_nextSrcSizeToDecompress() and ZSTD_decompressContinue() alternatively.
+  ZSTD_nextSrcSizeToDecompress() tells how many bytes to provide as 'srcSize' to ZSTD_decompressContinue().
+  ZSTD_decompressContinue() requires this _exact_ amount of bytes, or it will fail.
+
+ @result of ZSTD_decompressContinue() is the number of bytes regenerated within 'dst' (necessarily <= dstCapacity).
+  It can be zero : it just means ZSTD_decompressContinue() has decoded some metadata item.
+  It can also be an error code, which can be tested with ZSTD_isError().
+
+  A frame is fully decoded when ZSTD_nextSrcSizeToDecompress() returns zero.
+  Context can then be reset to start a new decompression.
+
+  Note : it's possible to know if next input to present is a header or a block, using ZSTD_nextInputType().
+  This information is not required to properly decode a frame.
+
+  == Special case : skippable frames ==
+
+  Skippable frames allow integration of user-defined data into a flow of concatenated frames.
+  Skippable frames will be ignored (skipped) by decompressor.
+  The format of skippable frames is as follows :
+  a) Skippable frame ID - 4 Bytes, Little endian format, any value from 0x184D2A50 to 0x184D2A5F
+  b) Frame Size - 4 Bytes, Little endian format, unsigned 32-bits
+  c) Frame Content - any content (User Data) of length equal to Frame Size
+  For skippable frames ZSTD_getFrameHeader() returns zfhPtr->frameType==ZSTD_skippableFrame.
+  For skippable frames ZSTD_decompressContinue() always returns 0 : it only skips the content.
+*/
+
+/*=====   Buffer-less streaming decompression functions  =====*/
+typedef enum { ZSTD_frame, ZSTD_skippableFrame } ZSTD_frameType_e;
+typedef struct {
+    unsigned long long frameContentSize; /* if == ZSTD_CONTENTSIZE_UNKNOWN, it means this field is not available. 0 means "empty" */
+    unsigned long long windowSize;       /* can be very large, up to <= frameContentSize */
+    unsigned blockSizeMax;
+    ZSTD_frameType_e frameType;          /* if == ZSTD_skippableFrame, frameContentSize is the size of skippable content */
+    unsigned headerSize;
+    unsigned dictID;
+    unsigned checksumFlag;
+} ZSTD_frameHeader;
+
+/** ZSTD_getFrameHeader() :
+ *  decode Frame Header, or requires larger `srcSize`.
+ * @return : 0, `zfhPtr` is correctly filled,
+ *          >0, `srcSize` is too small, value is wanted `srcSize` amount,
+ *           or an error code, which can be tested using ZSTD_isError() */
+ZSTDLIB_API size_t ZSTD_getFrameHeader(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize);   /**< doesn't consume input */
+/*! ZSTD_getFrameHeader_advanced() :
+ *  same as ZSTD_getFrameHeader(),
+ *  with added capability to select a format (like ZSTD_f_zstd1_magicless) */
+ZSTDLIB_API size_t ZSTD_getFrameHeader_advanced(ZSTD_frameHeader* zfhPtr, const void* src, size_t srcSize, ZSTD_format_e format);
+ZSTDLIB_API size_t ZSTD_decodingBufferSize_min(unsigned long long windowSize, unsigned long long frameContentSize);  /**< when frame content size is not known, pass in frameContentSize == ZSTD_CONTENTSIZE_UNKNOWN */
+
+ZSTDLIB_API size_t ZSTD_decompressBegin(ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_decompressBegin_usingDict(ZSTD_DCtx* dctx, const void* dict, size_t dictSize);
+ZSTDLIB_API size_t ZSTD_decompressBegin_usingDDict(ZSTD_DCtx* dctx, const ZSTD_DDict* ddict);
+
+ZSTDLIB_API size_t ZSTD_nextSrcSizeToDecompress(ZSTD_DCtx* dctx);
+ZSTDLIB_API size_t ZSTD_decompressContinue(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+
+/* misc */
+ZSTDLIB_API void   ZSTD_copyDCtx(ZSTD_DCtx* dctx, const ZSTD_DCtx* preparedDCtx);
+typedef enum { ZSTDnit_frameHeader, ZSTDnit_blockHeader, ZSTDnit_block, ZSTDnit_lastBlock, ZSTDnit_checksum, ZSTDnit_skippableFrame } ZSTD_nextInputType_e;
+ZSTDLIB_API ZSTD_nextInputType_e ZSTD_nextInputType(ZSTD_DCtx* dctx);
+
+
+
+
+/* ============================ */
+/**       Block level API       */
+/* ============================ */
+
+/*!
+    Block functions produce and decode raw zstd blocks, without frame metadata.
+    Frame metadata cost is typically ~18 bytes, which can be non-negligible for very small blocks (< 100 bytes).
+    User will have to take in charge required information to regenerate data, such as compressed and content sizes.
+
+    A few rules to respect :
+    - Compressing and decompressing require a context structure
+      + Use ZSTD_createCCtx() and ZSTD_createDCtx()
+    - It is necessary to init context before starting
+      + compression : any ZSTD_compressBegin*() variant, including with dictionary
+      + decompression : any ZSTD_decompressBegin*() variant, including with dictionary
+      + copyCCtx() and copyDCtx() can be used too
+    - Block size is limited, it must be <= ZSTD_getBlockSize() <= ZSTD_BLOCKSIZE_MAX == 128 KB
+      + If input is larger than a block size, it's necessary to split input data into multiple blocks
+      + For inputs larger than a single block, really consider using regular ZSTD_compress() instead.
+        Frame metadata is not that costly, and quickly becomes negligible as source size grows larger.
+    - When a block is considered not compressible enough, ZSTD_compressBlock() result will be zero.
+      In which case, nothing is produced into `dst` !
+      + User must test for such outcome and deal directly with uncompressed data
+      + ZSTD_decompressBlock() doesn't accept uncompressed data as input !!!
+      + In case of multiple successive blocks, should some of them be uncompressed,
+        decoder must be informed of their existence in order to follow proper history.
+        Use ZSTD_insertBlock() for such a case.
+*/
+
+/*=====   Raw zstd block functions  =====*/
+ZSTDLIB_API size_t ZSTD_getBlockSize   (const ZSTD_CCtx* cctx);
+ZSTDLIB_API size_t ZSTD_compressBlock  (ZSTD_CCtx* cctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_decompressBlock(ZSTD_DCtx* dctx, void* dst, size_t dstCapacity, const void* src, size_t srcSize);
+ZSTDLIB_API size_t ZSTD_insertBlock    (ZSTD_DCtx* dctx, const void* blockStart, size_t blockSize);  /**< insert uncompressed block into `dctx` history. Useful for multi-blocks decompression. */
+
+
+#endif   /* ZSTD_H_ZSTD_STATIC_LINKING_ONLY */
+
+#if defined (__cplusplus)
+}
+#endif