zstdlib 0.1.0-x64-mingw32

data/ext/zstdlib/zlib-1.2.11/inflate.h

@@ -0,0 +1,125 @@
+/* inflate.h -- internal inflate state definition
+ * Copyright (C) 1995-2016 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* define NO_GZIP when compiling if you want to disable gzip header and
+   trailer decoding by inflate().  NO_GZIP would be used to avoid linking in
+   the crc code when it is not needed.  For shared libraries, gzip decoding
+   should be left enabled. */
+#ifndef NO_GZIP
+#  define GUNZIP
+#endif
+
+/* Possible inflate modes between inflate() calls */
+typedef enum {
+    HEAD = 16180,   /* i: waiting for magic header */
+    FLAGS,      /* i: waiting for method and flags (gzip) */
+    TIME,       /* i: waiting for modification time (gzip) */
+    OS,         /* i: waiting for extra flags and operating system (gzip) */
+    EXLEN,      /* i: waiting for extra length (gzip) */
+    EXTRA,      /* i: waiting for extra bytes (gzip) */
+    NAME,       /* i: waiting for end of file name (gzip) */
+    COMMENT,    /* i: waiting for end of comment (gzip) */
+    HCRC,       /* i: waiting for header crc (gzip) */
+    DICTID,     /* i: waiting for dictionary check value */
+    DICT,       /* waiting for inflateSetDictionary() call */
+        TYPE,       /* i: waiting for type bits, including last-flag bit */
+        TYPEDO,     /* i: same, but skip check to exit inflate on new block */
+        STORED,     /* i: waiting for stored size (length and complement) */
+        COPY_,      /* i/o: same as COPY below, but only first time in */
+        COPY,       /* i/o: waiting for input or output to copy stored block */
+        TABLE,      /* i: waiting for dynamic block table lengths */
+        LENLENS,    /* i: waiting for code length code lengths */
+        CODELENS,   /* i: waiting for length/lit and distance code lengths */
+            LEN_,       /* i: same as LEN below, but only first time in */
+            LEN,        /* i: waiting for length/lit/eob code */
+            LENEXT,     /* i: waiting for length extra bits */
+            DIST,       /* i: waiting for distance code */
+            DISTEXT,    /* i: waiting for distance extra bits */
+            MATCH,      /* o: waiting for output space to copy string */
+            LIT,        /* o: waiting for output space to write literal */
+    CHECK,      /* i: waiting for 32-bit check value */
+    LENGTH,     /* i: waiting for 32-bit length (gzip) */
+    DONE,       /* finished check, done -- remain here until reset */
+    BAD,        /* got a data error -- remain here until reset */
+    MEM,        /* got an inflate() memory error -- remain here until reset */
+    SYNC        /* looking for synchronization bytes to restart inflate() */
+} inflate_mode;
+
+/*
+    State transitions between above modes -
+
+    (most modes can go to BAD or MEM on error -- not shown for clarity)
+
+    Process header:
+        HEAD -> (gzip) or (zlib) or (raw)
+        (gzip) -> FLAGS -> TIME -> OS -> EXLEN -> EXTRA -> NAME -> COMMENT ->
+                  HCRC -> TYPE
+        (zlib) -> DICTID or TYPE
+        DICTID -> DICT -> TYPE
+        (raw) -> TYPEDO
+    Read deflate blocks:
+            TYPE -> TYPEDO -> STORED or TABLE or LEN_ or CHECK
+            STORED -> COPY_ -> COPY -> TYPE
+            TABLE -> LENLENS -> CODELENS -> LEN_
+            LEN_ -> LEN
+    Read deflate codes in fixed or dynamic block:
+                LEN -> LENEXT or LIT or TYPE
+                LENEXT -> DIST -> DISTEXT -> MATCH -> LEN
+                LIT -> LEN
+    Process trailer:
+        CHECK -> LENGTH -> DONE
+ */
+
+/* State maintained between inflate() calls -- approximately 7K bytes, not
+   including the allocated sliding window, which is up to 32K bytes. */
+struct inflate_state {
+    z_streamp strm;             /* pointer back to this zlib stream */
+    inflate_mode mode;          /* current inflate mode */
+    int last;                   /* true if processing last block */
+    int wrap;                   /* bit 0 true for zlib, bit 1 true for gzip,
+                                   bit 2 true to validate check value */
+    int havedict;               /* true if dictionary provided */
+    int flags;                  /* gzip header method and flags (0 if zlib) */
+    unsigned dmax;              /* zlib header max distance (INFLATE_STRICT) */
+    unsigned long check;        /* protected copy of check value */
+    unsigned long total;        /* protected copy of output count */
+    gz_headerp head;            /* where to save gzip header information */
+        /* sliding window */
+    unsigned wbits;             /* log base 2 of requested window size */
+    unsigned wsize;             /* window size or zero if not using window */
+    unsigned whave;             /* valid bytes in the window */
+    unsigned wnext;             /* window write index */
+    unsigned char FAR *window;  /* allocated sliding window, if needed */
+        /* bit accumulator */
+    unsigned long hold;         /* input bit accumulator */
+    unsigned bits;              /* number of bits in "in" */
+        /* for string and stored block copying */
+    unsigned length;            /* literal or length of data to copy */
+    unsigned offset;            /* distance back to copy string from */
+        /* for table and code decoding */
+    unsigned extra;             /* extra bits needed */
+        /* fixed and dynamic code tables */
+    code const FAR *lencode;    /* starting table for length/literal codes */
+    code const FAR *distcode;   /* starting table for distance codes */
+    unsigned lenbits;           /* index bits for lencode */
+    unsigned distbits;          /* index bits for distcode */
+        /* dynamic table building */
+    unsigned ncode;             /* number of code length code lengths */
+    unsigned nlen;              /* number of length code lengths */
+    unsigned ndist;             /* number of distance code lengths */
+    unsigned have;              /* number of code lengths in lens[] */
+    code FAR *next;             /* next available space in codes[] */
+    unsigned short lens[320];   /* temporary storage for code lengths */
+    unsigned short work[288];   /* work area for code table building */
+    code codes[ENOUGH];         /* space for code tables */
+    int sane;                   /* if false, allow invalid distance too far */
+    int back;                   /* bits back of last unprocessed length/lit */
+    unsigned was;               /* initial length of match */
+};

data/ext/zstdlib/zlib-1.2.11/inftrees.c

@@ -0,0 +1,304 @@
+/* inftrees.c -- generate Huffman trees for efficient decoding
+ * Copyright (C) 1995-2017 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+#include "zutil.h"
+#include "inftrees.h"
+
+#define MAXBITS 15
+
+const char inflate_copyright[] =
+   " inflate 1.2.11 Copyright 1995-2017 Mark Adler ";
+/*
+  If you use the zlib library in a product, an acknowledgment is welcome
+  in the documentation of your product. If for some reason you cannot
+  include such an acknowledgment, I would appreciate that you keep this
+  copyright string in the executable of your product.
+ */
+
+/*
+   Build a set of tables to decode the provided canonical Huffman code.
+   The code lengths are lens[0..codes-1].  The result starts at *table,
+   whose indices are 0..2^bits-1.  work is a writable array of at least
+   lens shorts, which is used as a work area.  type is the type of code
+   to be generated, CODES, LENS, or DISTS.  On return, zero is success,
+   -1 is an invalid code, and +1 means that ENOUGH isn't enough.  table
+   on return points to the next available entry's address.  bits is the
+   requested root table index bits, and on return it is the actual root
+   table index bits.  It will differ if the request is greater than the
+   longest code or if it is less than the shortest code.
+ */
+int ZLIB_INTERNAL inflate_table(type, lens, codes, table, bits, work)
+codetype type;
+unsigned short FAR *lens;
+unsigned codes;
+code FAR * FAR *table;
+unsigned FAR *bits;
+unsigned short FAR *work;
+{
+    unsigned len;               /* a code's length in bits */
+    unsigned sym;               /* index of code symbols */
+    unsigned min, max;          /* minimum and maximum code lengths */
+    unsigned root;              /* number of index bits for root table */
+    unsigned curr;              /* number of index bits for current table */
+    unsigned drop;              /* code bits to drop for sub-table */
+    int left;                   /* number of prefix codes available */
+    unsigned used;              /* code entries in table used */
+    unsigned huff;              /* Huffman code */
+    unsigned incr;              /* for incrementing code, index */
+    unsigned fill;              /* index for replicating entries */
+    unsigned low;               /* low bits for current root entry */
+    unsigned mask;              /* mask for low root bits */
+    code here;                  /* table entry for duplication */
+    code FAR *next;             /* next available space in table */
+    const unsigned short FAR *base;     /* base value table to use */
+    const unsigned short FAR *extra;    /* extra bits table to use */
+    unsigned match;             /* use base and extra for symbol >= match */
+    unsigned short count[MAXBITS+1];    /* number of codes of each length */
+    unsigned short offs[MAXBITS+1];     /* offsets in table for each length */
+    static const unsigned short lbase[31] = { /* Length codes 257..285 base */
+        3, 4, 5, 6, 7, 8, 9, 10, 11, 13, 15, 17, 19, 23, 27, 31,
+        35, 43, 51, 59, 67, 83, 99, 115, 131, 163, 195, 227, 258, 0, 0};
+    static const unsigned short lext[31] = { /* Length codes 257..285 extra */
+        16, 16, 16, 16, 16, 16, 16, 16, 17, 17, 17, 17, 18, 18, 18, 18,
+        19, 19, 19, 19, 20, 20, 20, 20, 21, 21, 21, 21, 16, 77, 202};
+    static const unsigned short dbase[32] = { /* Distance codes 0..29 base */
+        1, 2, 3, 4, 5, 7, 9, 13, 17, 25, 33, 49, 65, 97, 129, 193,
+        257, 385, 513, 769, 1025, 1537, 2049, 3073, 4097, 6145,
+        8193, 12289, 16385, 24577, 0, 0};
+    static const unsigned short dext[32] = { /* Distance codes 0..29 extra */
+        16, 16, 16, 16, 17, 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, 22,
+        23, 23, 24, 24, 25, 25, 26, 26, 27, 27,
+        28, 28, 29, 29, 64, 64};
+
+    /*
+       Process a set of code lengths to create a canonical Huffman code.  The
+       code lengths are lens[0..codes-1].  Each length corresponds to the
+       symbols 0..codes-1.  The Huffman code is generated by first sorting the
+       symbols by length from short to long, and retaining the symbol order
+       for codes with equal lengths.  Then the code starts with all zero bits
+       for the first code of the shortest length, and the codes are integer
+       increments for the same length, and zeros are appended as the length
+       increases.  For the deflate format, these bits are stored backwards
+       from their more natural integer increment ordering, and so when the
+       decoding tables are built in the large loop below, the integer codes
+       are incremented backwards.
+
+       This routine assumes, but does not check, that all of the entries in
+       lens[] are in the range 0..MAXBITS.  The caller must assure this.
+       1..MAXBITS is interpreted as that code length.  zero means that that
+       symbol does not occur in this code.
+
+       The codes are sorted by computing a count of codes for each length,
+       creating from that a table of starting indices for each length in the
+       sorted table, and then entering the symbols in order in the sorted
+       table.  The sorted table is work[], with that space being provided by
+       the caller.
+
+       The length counts are used for other purposes as well, i.e. finding
+       the minimum and maximum length codes, determining if there are any
+       codes at all, checking for a valid set of lengths, and looking ahead
+       at length counts to determine sub-table sizes when building the
+       decoding tables.
+     */
+
+    /* accumulate lengths for codes (assumes lens[] all in 0..MAXBITS) */
+    for (len = 0; len <= MAXBITS; len++)
+        count[len] = 0;
+    for (sym = 0; sym < codes; sym++)
+        count[lens[sym]]++;
+
+    /* bound code lengths, force root to be within code lengths */
+    root = *bits;
+    for (max = MAXBITS; max >= 1; max--)
+        if (count[max] != 0) break;
+    if (root > max) root = max;
+    if (max == 0) {                     /* no symbols to code at all */
+        here.op = (unsigned char)64;    /* invalid code marker */
+        here.bits = (unsigned char)1;
+        here.val = (unsigned short)0;
+        *(*table)++ = here;             /* make a table to force an error */
+        *(*table)++ = here;
+        *bits = 1;
+        return 0;     /* no symbols, but wait for decoding to report error */
+    }
+    for (min = 1; min < max; min++)
+        if (count[min] != 0) break;
+    if (root < min) root = min;
+
+    /* check for an over-subscribed or incomplete set of lengths */
+    left = 1;
+    for (len = 1; len <= MAXBITS; len++) {
+        left <<= 1;
+        left -= count[len];
+        if (left < 0) return -1;        /* over-subscribed */
+    }
+    if (left > 0 && (type == CODES || max != 1))
+        return -1;                      /* incomplete set */
+
+    /* generate offsets into symbol table for each length for sorting */
+    offs[1] = 0;
+    for (len = 1; len < MAXBITS; len++)
+        offs[len + 1] = offs[len] + count[len];
+
+    /* sort symbols by length, by symbol order within each length */
+    for (sym = 0; sym < codes; sym++)
+        if (lens[sym] != 0) work[offs[lens[sym]]++] = (unsigned short)sym;
+
+    /*
+       Create and fill in decoding tables.  In this loop, the table being
+       filled is at next and has curr index bits.  The code being used is huff
+       with length len.  That code is converted to an index by dropping drop
+       bits off of the bottom.  For codes where len is less than drop + curr,
+       those top drop + curr - len bits are incremented through all values to
+       fill the table with replicated entries.
+
+       root is the number of index bits for the root table.  When len exceeds
+       root, sub-tables are created pointed to by the root entry with an index
+       of the low root bits of huff.  This is saved in low to check for when a
+       new sub-table should be started.  drop is zero when the root table is
+       being filled, and drop is root when sub-tables are being filled.
+
+       When a new sub-table is needed, it is necessary to look ahead in the
+       code lengths to determine what size sub-table is needed.  The length
+       counts are used for this, and so count[] is decremented as codes are
+       entered in the tables.
+
+       used keeps track of how many table entries have been allocated from the
+       provided *table space.  It is checked for LENS and DIST tables against
+       the constants ENOUGH_LENS and ENOUGH_DISTS to guard against changes in
+       the initial root table size constants.  See the comments in inftrees.h
+       for more information.
+
+       sym increments through all symbols, and the loop terminates when
+       all codes of length max, i.e. all codes, have been processed.  This
+       routine permits incomplete codes, so another loop after this one fills
+       in the rest of the decoding tables with invalid code markers.
+     */
+
+    /* set up for code type */
+    switch (type) {
+    case CODES:
+        base = extra = work;    /* dummy value--not used */
+        match = 20;
+        break;
+    case LENS:
+        base = lbase;
+        extra = lext;
+        match = 257;
+        break;
+    default:    /* DISTS */
+        base = dbase;
+        extra = dext;
+        match = 0;
+    }
+
+    /* initialize state for loop */
+    huff = 0;                   /* starting code */
+    sym = 0;                    /* starting code symbol */
+    len = min;                  /* starting code length */
+    next = *table;              /* current table to fill in */
+    curr = root;                /* current table index bits */
+    drop = 0;                   /* current bits to drop from code for index */
+    low = (unsigned)(-1);       /* trigger new sub-table when len > root */
+    used = 1U << root;          /* use root table entries */
+    mask = used - 1;            /* mask for comparing low */
+
+    /* check available table space */
+    if ((type == LENS && used > ENOUGH_LENS) ||
+        (type == DISTS && used > ENOUGH_DISTS))
+        return 1;
+
+    /* process all codes and make table entries */
+    for (;;) {
+        /* create table entry */
+        here.bits = (unsigned char)(len - drop);
+        if (work[sym] + 1U < match) {
+            here.op = (unsigned char)0;
+            here.val = work[sym];
+        }
+        else if (work[sym] >= match) {
+            here.op = (unsigned char)(extra[work[sym] - match]);
+            here.val = base[work[sym] - match];
+        }
+        else {
+            here.op = (unsigned char)(32 + 64);         /* end of block */
+            here.val = 0;
+        }
+
+        /* replicate for those indices with low len bits equal to huff */
+        incr = 1U << (len - drop);
+        fill = 1U << curr;
+        min = fill;                 /* save offset to next table */
+        do {
+            fill -= incr;
+            next[(huff >> drop) + fill] = here;
+        } while (fill != 0);
+
+        /* backwards increment the len-bit code huff */
+        incr = 1U << (len - 1);
+        while (huff & incr)
+            incr >>= 1;
+        if (incr != 0) {
+            huff &= incr - 1;
+            huff += incr;
+        }
+        else
+            huff = 0;
+
+        /* go to next symbol, update count, len */
+        sym++;
+        if (--(count[len]) == 0) {
+            if (len == max) break;
+            len = lens[work[sym]];
+        }
+
+        /* create new sub-table if needed */
+        if (len > root && (huff & mask) != low) {
+            /* if first time, transition to sub-tables */
+            if (drop == 0)
+                drop = root;
+
+            /* increment past last table */
+            next += min;            /* here min is 1 << curr */
+
+            /* determine length of next table */
+            curr = len - drop;
+            left = (int)(1 << curr);
+            while (curr + drop < max) {
+                left -= count[curr + drop];
+                if (left <= 0) break;
+                curr++;
+                left <<= 1;
+            }
+
+            /* check for enough space */
+            used += 1U << curr;
+            if ((type == LENS && used > ENOUGH_LENS) ||
+                (type == DISTS && used > ENOUGH_DISTS))
+                return 1;
+
+            /* point entry in root table to sub-table */
+            low = huff & mask;
+            (*table)[low].op = (unsigned char)curr;
+            (*table)[low].bits = (unsigned char)root;
+            (*table)[low].val = (unsigned short)(next - *table);
+        }
+    }
+
+    /* fill in remaining table entry if code is incomplete (guaranteed to have
+       at most one remaining entry, since if the code is incomplete, the
+       maximum code length that was allowed to get this far is one bit) */
+    if (huff != 0) {
+        here.op = (unsigned char)64;            /* invalid code marker */
+        here.bits = (unsigned char)(len - drop);
+        here.val = (unsigned short)0;
+        next[huff] = here;
+    }
+
+    /* set return parameters */
+    *table += used;
+    *bits = root;
+    return 0;
+}

data/ext/zstdlib/zlib-1.2.11/inftrees.h

@@ -0,0 +1,62 @@
+/* inftrees.h -- header to use inftrees.c
+ * Copyright (C) 1995-2005, 2010 Mark Adler
+ * For conditions of distribution and use, see copyright notice in zlib.h
+ */
+
+/* WARNING: this file should *not* be used by applications. It is
+   part of the implementation of the compression library and is
+   subject to change. Applications should only use zlib.h.
+ */
+
+/* Structure for decoding tables.  Each entry provides either the
+   information needed to do the operation requested by the code that
+   indexed that table entry, or it provides a pointer to another
+   table that indexes more bits of the code.  op indicates whether
+   the entry is a pointer to another table, a literal, a length or
+   distance, an end-of-block, or an invalid code.  For a table
+   pointer, the low four bits of op is the number of index bits of
+   that table.  For a length or distance, the low four bits of op
+   is the number of extra bits to get after the code.  bits is
+   the number of bits in this code or part of the code to drop off
+   of the bit buffer.  val is the actual byte to output in the case
+   of a literal, the base length or distance, or the offset from
+   the current table to the next table.  Each entry is four bytes. */
+typedef struct {
+    unsigned char op;           /* operation, extra bits, table bits */
+    unsigned char bits;         /* bits in this part of the code */
+    unsigned short val;         /* offset in table or code value */
+} code;
+
+/* op values as set by inflate_table():
+    00000000 - literal
+    0000tttt - table link, tttt != 0 is the number of table index bits
+    0001eeee - length or distance, eeee is the number of extra bits
+    01100000 - end of block
+    01000000 - invalid code
+ */
+
+/* Maximum size of the dynamic table.  The maximum number of code structures is
+   1444, which is the sum of 852 for literal/length codes and 592 for distance
+   codes.  These values were found by exhaustive searches using the program
+   examples/enough.c found in the zlib distribtution.  The arguments to that
+   program are the number of symbols, the initial root table size, and the
+   maximum bit length of a code.  "enough 286 9 15" for literal/length codes
+   returns returns 852, and "enough 30 6 15" for distance codes returns 592.
+   The initial root table size (9 or 6) is found in the fifth argument of the
+   inflate_table() calls in inflate.c and infback.c.  If the root table size is
+   changed, then these maximum sizes would be need to be recalculated and
+   updated. */
+#define ENOUGH_LENS 852
+#define ENOUGH_DISTS 592
+#define ENOUGH (ENOUGH_LENS+ENOUGH_DISTS)
+
+/* Type of code to build for inflate_table() */
+typedef enum {
+    CODES,
+    LENS,
+    DISTS
+} codetype;
+
+int ZLIB_INTERNAL inflate_table OF((codetype type, unsigned short FAR *lens,
+                             unsigned codes, code FAR * FAR *table,
+                             unsigned FAR *bits, unsigned short FAR *work));