yb_ddl_parser 0.1.0

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogrecord.h

@@ -0,0 +1,236 @@
+/*
+ * xlogrecord.h
+ *
+ * Definitions for the WAL record format.
+ *
+ * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/xlogrecord.h
+ */
+#ifndef XLOGRECORD_H
+#define XLOGRECORD_H
+
+#include "access/rmgr.h"
+#include "access/xlogdefs.h"
+#include "port/pg_crc32c.h"
+#include "storage/block.h"
+#include "storage/relfilenode.h"
+
+/*
+ * The overall layout of an XLOG record is:
+ *		Fixed-size header (XLogRecord struct)
+ *		XLogRecordBlockHeader struct
+ *		XLogRecordBlockHeader struct
+ *		...
+ *		XLogRecordDataHeader[Short|Long] struct
+ *		block data
+ *		block data
+ *		...
+ *		main data
+ *
+ * There can be zero or more XLogRecordBlockHeaders, and 0 or more bytes of
+ * rmgr-specific data not associated with a block.  XLogRecord structs
+ * always start on MAXALIGN boundaries in the WAL files, but the rest of
+ * the fields are not aligned.
+ *
+ * The XLogRecordBlockHeader, XLogRecordDataHeaderShort and
+ * XLogRecordDataHeaderLong structs all begin with a single 'id' byte. It's
+ * used to distinguish between block references, and the main data structs.
+ */
+typedef struct XLogRecord
+{
+	uint32		xl_tot_len;		/* total len of entire record */
+	TransactionId xl_xid;		/* xact id */
+	XLogRecPtr	xl_prev;		/* ptr to previous record in log */
+	uint8		xl_info;		/* flag bits, see below */
+	RmgrId		xl_rmid;		/* resource manager for this record */
+	/* 2 bytes of padding here, initialize to zero */
+	pg_crc32c	xl_crc;			/* CRC for this record */
+
+	/* XLogRecordBlockHeaders and XLogRecordDataHeader follow, no padding */
+
+} XLogRecord;
+
+#define SizeOfXLogRecord	(offsetof(XLogRecord, xl_crc) + sizeof(pg_crc32c))
+
+/*
+ * The high 4 bits in xl_info may be used freely by rmgr. The
+ * XLR_SPECIAL_REL_UPDATE and XLR_CHECK_CONSISTENCY bits can be passed by
+ * XLogInsert caller. The rest are set internally by XLogInsert.
+ */
+#define XLR_INFO_MASK			0x0F
+#define XLR_RMGR_INFO_MASK		0xF0
+
+/*
+ * If a WAL record modifies any relation files, in ways not covered by the
+ * usual block references, this flag is set. This is not used for anything
+ * by PostgreSQL itself, but it allows external tools that read WAL and keep
+ * track of modified blocks to recognize such special record types.
+ */
+#define XLR_SPECIAL_REL_UPDATE	0x01
+
+/*
+ * Enforces consistency checks of replayed WAL at recovery. If enabled,
+ * each record will log a full-page write for each block modified by the
+ * record and will reuse it afterwards for consistency checks. The caller
+ * of XLogInsert can use this value if necessary, but if
+ * wal_consistency_checking is enabled for a rmgr this is set unconditionally.
+ */
+#define XLR_CHECK_CONSISTENCY	0x02
+
+/*
+ * Header info for block data appended to an XLOG record.
+ *
+ * 'data_length' is the length of the rmgr-specific payload data associated
+ * with this block. It does not include the possible full page image, nor
+ * XLogRecordBlockHeader struct itself.
+ *
+ * Note that we don't attempt to align the XLogRecordBlockHeader struct!
+ * So, the struct must be copied to aligned local storage before use.
+ */
+typedef struct XLogRecordBlockHeader
+{
+	uint8		id;				/* block reference ID */
+	uint8		fork_flags;		/* fork within the relation, and flags */
+	uint16		data_length;	/* number of payload bytes (not including page
+								 * image) */
+
+	/* If BKPBLOCK_HAS_IMAGE, an XLogRecordBlockImageHeader struct follows */
+	/* If BKPBLOCK_SAME_REL is not set, a RelFileNode follows */
+	/* BlockNumber follows */
+} XLogRecordBlockHeader;
+
+#define SizeOfXLogRecordBlockHeader (offsetof(XLogRecordBlockHeader, data_length) + sizeof(uint16))
+
+/*
+ * Additional header information when a full-page image is included
+ * (i.e. when BKPBLOCK_HAS_IMAGE is set).
+ *
+ * The XLOG code is aware that PG data pages usually contain an unused "hole"
+ * in the middle, which contains only zero bytes.  Since we know that the
+ * "hole" is all zeros, we remove it from the stored data (and it's not counted
+ * in the XLOG record's CRC, either).  Hence, the amount of block data actually
+ * present is (BLCKSZ - <length of "hole" bytes>).
+ *
+ * Additionally, when wal_compression is enabled, we will try to compress full
+ * page images using one of the supported algorithms, after removing the
+ * "hole". This can reduce the WAL volume, but at some extra cost of CPU spent
+ * on the compression during WAL logging. In this case, since the "hole"
+ * length cannot be calculated by subtracting the number of page image bytes
+ * from BLCKSZ, basically it needs to be stored as an extra information.
+ * But when no "hole" exists, we can assume that the "hole" length is zero
+ * and no such an extra information needs to be stored. Note that
+ * the original version of page image is stored in WAL instead of the
+ * compressed one if the number of bytes saved by compression is less than
+ * the length of extra information. Hence, when a page image is successfully
+ * compressed, the amount of block data actually present is less than
+ * BLCKSZ - the length of "hole" bytes - the length of extra information.
+ */
+typedef struct XLogRecordBlockImageHeader
+{
+	uint16		length;			/* number of page image bytes */
+	uint16		hole_offset;	/* number of bytes before "hole" */
+	uint8		bimg_info;		/* flag bits, see below */
+
+	/*
+	 * If BKPIMAGE_HAS_HOLE and BKPIMAGE_COMPRESSED(), an
+	 * XLogRecordBlockCompressHeader struct follows.
+	 */
+} XLogRecordBlockImageHeader;
+
+#define SizeOfXLogRecordBlockImageHeader	\
+	(offsetof(XLogRecordBlockImageHeader, bimg_info) + sizeof(uint8))
+
+/* Information stored in bimg_info */
+#define BKPIMAGE_HAS_HOLE		0x01	/* page image has "hole" */
+#define BKPIMAGE_APPLY			0x02	/* page image should be restored
+										 * during replay */
+/* compression methods supported */
+#define BKPIMAGE_COMPRESS_PGLZ	0x04
+#define BKPIMAGE_COMPRESS_LZ4	0x08
+#define BKPIMAGE_COMPRESS_ZSTD	0x10
+
+#define	BKPIMAGE_COMPRESSED(info) \
+	((info & (BKPIMAGE_COMPRESS_PGLZ | BKPIMAGE_COMPRESS_LZ4 | \
+			  BKPIMAGE_COMPRESS_ZSTD)) != 0)
+
+/*
+ * Extra header information used when page image has "hole" and
+ * is compressed.
+ */
+typedef struct XLogRecordBlockCompressHeader
+{
+	uint16		hole_length;	/* number of bytes in "hole" */
+} XLogRecordBlockCompressHeader;
+
+#define SizeOfXLogRecordBlockCompressHeader \
+	sizeof(XLogRecordBlockCompressHeader)
+
+/*
+ * Maximum size of the header for a block reference. This is used to size a
+ * temporary buffer for constructing the header.
+ */
+#define MaxSizeOfXLogRecordBlockHeader \
+	(SizeOfXLogRecordBlockHeader + \
+	 SizeOfXLogRecordBlockImageHeader + \
+	 SizeOfXLogRecordBlockCompressHeader + \
+	 sizeof(RelFileNode) + \
+	 sizeof(BlockNumber))
+
+/*
+ * The fork number fits in the lower 4 bits in the fork_flags field. The upper
+ * bits are used for flags.
+ */
+#define BKPBLOCK_FORK_MASK	0x0F
+#define BKPBLOCK_FLAG_MASK	0xF0
+#define BKPBLOCK_HAS_IMAGE	0x10	/* block data is an XLogRecordBlockImage */
+#define BKPBLOCK_HAS_DATA	0x20
+#define BKPBLOCK_WILL_INIT	0x40	/* redo will re-init the page */
+#define BKPBLOCK_SAME_REL	0x80	/* RelFileNode omitted, same as previous */
+
+/*
+ * XLogRecordDataHeaderShort/Long are used for the "main data" portion of
+ * the record. If the length of the data is less than 256 bytes, the short
+ * form is used, with a single byte to hold the length. Otherwise the long
+ * form is used.
+ *
+ * (These structs are currently not used in the code, they are here just for
+ * documentation purposes).
+ */
+typedef struct XLogRecordDataHeaderShort
+{
+	uint8		id;				/* XLR_BLOCK_ID_DATA_SHORT */
+	uint8		data_length;	/* number of payload bytes */
+}			XLogRecordDataHeaderShort;
+
+#define SizeOfXLogRecordDataHeaderShort (sizeof(uint8) * 2)
+
+typedef struct XLogRecordDataHeaderLong
+{
+	uint8		id;				/* XLR_BLOCK_ID_DATA_LONG */
+	/* followed by uint32 data_length, unaligned */
+}			XLogRecordDataHeaderLong;
+
+#define SizeOfXLogRecordDataHeaderLong (sizeof(uint8) + sizeof(uint32))
+
+/*
+ * Block IDs used to distinguish different kinds of record fragments. Block
+ * references are numbered from 0 to XLR_MAX_BLOCK_ID. A rmgr is free to use
+ * any ID number in that range (although you should stick to small numbers,
+ * because the WAL machinery is optimized for that case). A few ID
+ * numbers are reserved to denote the "main" data portion of the record,
+ * as well as replication-supporting transaction metadata.
+ *
+ * The maximum is currently set at 32, quite arbitrarily. Most records only
+ * need a handful of block references, but there are a few exceptions that
+ * need more.
+ */
+#define XLR_MAX_BLOCK_ID			32
+
+#define XLR_BLOCK_ID_DATA_SHORT		255
+#define XLR_BLOCK_ID_DATA_LONG		254
+#define XLR_BLOCK_ID_ORIGIN			253
+#define XLR_BLOCK_ID_TOPLEVEL_XID	252
+
+#endif							/* XLOGRECORD_H */

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogrecovery.h

@@ -0,0 +1,157 @@
+/*
+ * xlogrecovery.h
+ *
+ * Functions for WAL recovery and standby mode
+ *
+ * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/xlogrecovery.h
+ */
+#ifndef XLOGRECOVERY_H
+#define XLOGRECOVERY_H
+
+#include "access/xlogreader.h"
+#include "catalog/pg_control.h"
+#include "lib/stringinfo.h"
+#include "utils/timestamp.h"
+
+/*
+ * Recovery target type.
+ * Only set during a Point in Time recovery, not when in standby mode.
+ */
+typedef enum
+{
+	RECOVERY_TARGET_UNSET,
+	RECOVERY_TARGET_XID,
+	RECOVERY_TARGET_TIME,
+	RECOVERY_TARGET_NAME,
+	RECOVERY_TARGET_LSN,
+	RECOVERY_TARGET_IMMEDIATE
+} RecoveryTargetType;
+
+/*
+ * Recovery target TimeLine goal
+ */
+typedef enum
+{
+	RECOVERY_TARGET_TIMELINE_CONTROLFILE,
+	RECOVERY_TARGET_TIMELINE_LATEST,
+	RECOVERY_TARGET_TIMELINE_NUMERIC
+} RecoveryTargetTimeLineGoal;
+
+/* Recovery pause states */
+typedef enum RecoveryPauseState
+{
+	RECOVERY_NOT_PAUSED,		/* pause not requested */
+	RECOVERY_PAUSE_REQUESTED,	/* pause requested, but not yet paused */
+	RECOVERY_PAUSED				/* recovery is paused */
+} RecoveryPauseState;
+
+/* User-settable GUC parameters */
+extern PGDLLIMPORT bool recoveryTargetInclusive;
+extern PGDLLIMPORT int recoveryTargetAction;
+extern PGDLLIMPORT int recovery_min_apply_delay;
+extern PGDLLIMPORT char *PrimaryConnInfo;
+extern PGDLLIMPORT char *PrimarySlotName;
+extern PGDLLIMPORT char *recoveryRestoreCommand;
+extern PGDLLIMPORT char *recoveryEndCommand;
+extern PGDLLIMPORT char *archiveCleanupCommand;
+
+/* indirectly set via GUC system */
+extern PGDLLIMPORT TransactionId recoveryTargetXid;
+extern PGDLLIMPORT char *recovery_target_time_string;
+extern PGDLLIMPORT TimestampTz recoveryTargetTime;
+extern PGDLLIMPORT const char *recoveryTargetName;
+extern PGDLLIMPORT XLogRecPtr recoveryTargetLSN;
+extern PGDLLIMPORT RecoveryTargetType recoveryTarget;
+extern PGDLLIMPORT char *PromoteTriggerFile;
+extern PGDLLIMPORT bool wal_receiver_create_temp_slot;
+extern PGDLLIMPORT RecoveryTargetTimeLineGoal recoveryTargetTimeLineGoal;
+extern PGDLLIMPORT TimeLineID recoveryTargetTLIRequested;
+extern PGDLLIMPORT TimeLineID recoveryTargetTLI;
+
+/* Have we already reached a consistent database state? */
+extern PGDLLIMPORT bool reachedConsistency;
+
+/* Are we currently in standby mode? */
+extern PGDLLIMPORT bool StandbyMode;
+
+extern Size XLogRecoveryShmemSize(void);
+extern void XLogRecoveryShmemInit(void);
+
+extern void InitWalRecovery(ControlFileData *ControlFile, bool *wasShutdownPtr, bool *haveBackupLabel, bool *haveTblspcMap);
+extern void PerformWalRecovery(void);
+
+/*
+ * FinishWalRecovery() returns this.  It contains information about the point
+ * where recovery ended, and why it ended.
+ */
+typedef struct
+{
+	/*
+	 * Information about the last valid or applied record, after which new WAL
+	 * can be appended.  'lastRec' is the position where the last record
+	 * starts, and 'endOfLog' is its end.  'lastPage' is a copy of the last
+	 * partial page that contains endOfLog (or NULL if endOfLog is exactly at
+	 * page boundary).  'lastPageBeginPtr' is the position where the last page
+	 * begins.
+	 *
+	 * endOfLogTLI is the TLI in the filename of the XLOG segment containing
+	 * the last applied record.  It could be different from lastRecTLI, if
+	 * there was a timeline switch in that segment, and we were reading the
+	 * old WAL from a segment belonging to a higher timeline.
+	 */
+	XLogRecPtr	lastRec;		/* start of last valid or applied record */
+	TimeLineID	lastRecTLI;
+	XLogRecPtr	endOfLog;		/* end of last valid or applied record */
+	TimeLineID	endOfLogTLI;
+
+	XLogRecPtr	lastPageBeginPtr;	/* LSN of page that contains endOfLog */
+	char	   *lastPage;		/* copy of the last page, up to endOfLog */
+
+	/*
+	 * abortedRecPtr is the start pointer of a broken record at end of WAL
+	 * when recovery completes; missingContrecPtr is the location of the first
+	 * contrecord that went missing.  See CreateOverwriteContrecordRecord for
+	 * details.
+	 */
+	XLogRecPtr	abortedRecPtr;
+	XLogRecPtr	missingContrecPtr;
+
+	/* short human-readable string describing why recovery ended */
+	char	   *recoveryStopReason;
+
+	/*
+	 * If standby or recovery signal file was found, these flags are set
+	 * accordingly.
+	 */
+	bool		standby_signal_file_found;
+	bool		recovery_signal_file_found;
+} EndOfWalRecoveryInfo;
+
+extern EndOfWalRecoveryInfo *FinishWalRecovery(void);
+extern void ShutdownWalRecovery(void);
+extern void RemovePromoteSignalFiles(void);
+
+extern bool HotStandbyActive(void);
+extern XLogRecPtr GetXLogReplayRecPtr(TimeLineID *replayTLI);
+extern RecoveryPauseState GetRecoveryPauseState(void);
+extern void SetRecoveryPause(bool recoveryPause);
+extern void GetXLogReceiptTime(TimestampTz *rtime, bool *fromStream);
+extern TimestampTz GetLatestXTime(void);
+extern TimestampTz GetCurrentChunkReplayStartTime(void);
+extern XLogRecPtr GetCurrentReplayRecPtr(TimeLineID *replayEndTLI);
+
+extern bool PromoteIsTriggered(void);
+extern bool CheckPromoteSignal(void);
+extern void WakeupRecovery(void);
+
+extern void StartupRequestWalReceiverRestart(void);
+extern void XLogRequestWalReceiverReply(void);
+
+extern void RecoveryRequiresIntParameter(const char *param_name, int currValue, int minValue);
+
+extern void xlog_outdesc(StringInfo buf, XLogReaderState *record);
+
+#endif							/* XLOGRECOVERY_H */

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogstats.h

@@ -0,0 +1,43 @@
+/*-------------------------------------------------------------------------
+ *
+ * xlogstats.h
+ *		Definitions for WAL Statitstics
+ *
+ * Copyright (c) 2022, PostgreSQL Global Development Group
+ *
+ * IDENTIFICATION
+ *		src/include/access/xlogstats.h
+ *
+ *-------------------------------------------------------------------------
+ */
+#ifndef XLOGSTATS_H
+#define XLOGSTATS_H
+
+#include "access/rmgr.h"
+#include "access/xlogreader.h"
+
+#define MAX_XLINFO_TYPES 16
+
+typedef struct XLogRecStats
+{
+	uint64		count;
+	uint64		rec_len;
+	uint64		fpi_len;
+} XLogRecStats;
+
+typedef struct XLogStats
+{
+	uint64		count;
+#ifdef FRONTEND
+	XLogRecPtr	startptr;
+	XLogRecPtr	endptr;
+#endif
+	XLogRecStats rmgr_stats[RM_MAX_ID + 1];
+	XLogRecStats record_stats[RM_MAX_ID + 1][MAX_XLINFO_TYPES];
+} XLogStats;
+
+extern void XLogRecGetLen(XLogReaderState *record, uint32 *rec_len,
+						  uint32 *fpi_len);
+extern void XLogRecStoreStats(XLogStats *stats, XLogReaderState *record);
+
+#endif							/* XLOGSTATS_H */

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogutils.h

@@ -0,0 +1,118 @@
+/*
+ * xlogutils.h
+ *
+ * Utilities for replaying WAL records.
+ *
+ * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/xlogutils.h
+ */
+#ifndef XLOG_UTILS_H
+#define XLOG_UTILS_H
+
+#include "access/xlogreader.h"
+#include "storage/bufmgr.h"
+
+/*
+ * Prior to 8.4, all activity during recovery was carried out by the startup
+ * process. This local variable continues to be used in many parts of the
+ * code to indicate actions taken by RecoveryManagers. Other processes that
+ * potentially perform work during recovery should check RecoveryInProgress().
+ * See XLogCtl notes in xlog.c.
+ */
+extern PGDLLIMPORT bool InRecovery;
+
+/*
+ * Like InRecovery, standbyState is only valid in the startup process.
+ * In all other processes it will have the value STANDBY_DISABLED (so
+ * InHotStandby will read as false).
+ *
+ * In DISABLED state, we're performing crash recovery or hot standby was
+ * disabled in postgresql.conf.
+ *
+ * In INITIALIZED state, we've run InitRecoveryTransactionEnvironment, but
+ * we haven't yet processed a RUNNING_XACTS or shutdown-checkpoint WAL record
+ * to initialize our primary-transaction tracking system.
+ *
+ * When the transaction tracking is initialized, we enter the SNAPSHOT_PENDING
+ * state. The tracked information might still be incomplete, so we can't allow
+ * connections yet, but redo functions must update the in-memory state when
+ * appropriate.
+ *
+ * In SNAPSHOT_READY mode, we have full knowledge of transactions that are
+ * (or were) running on the primary at the current WAL location. Snapshots
+ * can be taken, and read-only queries can be run.
+ */
+typedef enum
+{
+	STANDBY_DISABLED,
+	STANDBY_INITIALIZED,
+	STANDBY_SNAPSHOT_PENDING,
+	STANDBY_SNAPSHOT_READY
+} HotStandbyState;
+
+extern PGDLLIMPORT HotStandbyState standbyState;
+
+#define InHotStandby (standbyState >= STANDBY_SNAPSHOT_PENDING)
+
+
+extern bool XLogHaveInvalidPages(void);
+extern void XLogCheckInvalidPages(void);
+
+extern void XLogDropRelation(RelFileNode rnode, ForkNumber forknum);
+extern void XLogDropDatabase(Oid dbid);
+extern void XLogTruncateRelation(RelFileNode rnode, ForkNumber forkNum,
+								 BlockNumber nblocks);
+
+/* Result codes for XLogReadBufferForRedo[Extended] */
+typedef enum
+{
+	BLK_NEEDS_REDO,				/* changes from WAL record need to be applied */
+	BLK_DONE,					/* block is already up-to-date */
+	BLK_RESTORED,				/* block was restored from a full-page image */
+	BLK_NOTFOUND				/* block was not found (and hence does not
+								 * need to be replayed) */
+} XLogRedoAction;
+
+/* Private data of the read_local_xlog_page_no_wait callback. */
+typedef struct ReadLocalXLogPageNoWaitPrivate
+{
+	bool		end_of_wal;		/* true, when end of WAL is reached */
+} ReadLocalXLogPageNoWaitPrivate;
+
+extern XLogRedoAction XLogReadBufferForRedo(XLogReaderState *record,
+											uint8 buffer_id, Buffer *buf);
+extern Buffer XLogInitBufferForRedo(XLogReaderState *record, uint8 block_id);
+extern XLogRedoAction XLogReadBufferForRedoExtended(XLogReaderState *record,
+													uint8 buffer_id,
+													ReadBufferMode mode, bool get_cleanup_lock,
+													Buffer *buf);
+
+extern Buffer XLogReadBufferExtended(RelFileNode rnode, ForkNumber forknum,
+									 BlockNumber blkno, ReadBufferMode mode,
+									 Buffer recent_buffer);
+
+extern Relation CreateFakeRelcacheEntry(RelFileNode rnode);
+extern void FreeFakeRelcacheEntry(Relation fakerel);
+
+extern int	read_local_xlog_page(XLogReaderState *state,
+								 XLogRecPtr targetPagePtr, int reqLen,
+								 XLogRecPtr targetRecPtr, char *cur_page);
+extern int	read_local_xlog_page_no_wait(XLogReaderState *state,
+										 XLogRecPtr targetPagePtr, int reqLen,
+										 XLogRecPtr targetRecPtr,
+										 char *cur_page);
+extern void wal_segment_open(XLogReaderState *state,
+							 XLogSegNo nextSegNo,
+							 TimeLineID *tli_p);
+extern void wal_segment_close(XLogReaderState *state);
+
+extern void XLogReadDetermineTimeline(XLogReaderState *state,
+									  XLogRecPtr wantPage,
+									  uint32 wantLength,
+									  TimeLineID currTLI);
+
+extern void WALReadRaiseError(WALReadError *errinfo);
+
+#endif

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/yb_pg_inherits_scan.h

@@ -0,0 +1,36 @@
+/*-------------------------------------------------------------------------
+ *
+ * yb_pg_inherits_scan.h
+ *		This is an API used to abstract accesses to the pg_inherits catalog
+ *		table.
+ *
+ * Copyright (c) YugabyteDB, Inc.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may not
+ * use this file except in compliance with the License.  You may obtain a copy
+ * of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.  See the
+ * License for the specific language governing permissions and limitations
+ * under the License.
+ *
+ * IDENTIFICATION
+ *	  src/include/access/yb_access/yb_pg_inherits_scan.h
+ *
+ *-------------------------------------------------------------------------
+ */
+
+#ifndef YB_PG_INHERITS_SCAN_H
+#define YB_PG_INHERITS_SCAN_H
+
+#include "access/heapam.h"
+#include "access/yb_sys_scan_base.h"
+
+extern YbSysScanBase yb_pg_inherits_beginscan(Relation inhrelation, ScanKey key,
+											  int nkeys, Oid indexId);
+
+#endif							/* YB_PG_INHERITS_SCAN_H */