yb_ddl_parser 0.1.0

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogdefs.h

@@ -0,0 +1,101 @@
+/*
+ * xlogdefs.h
+ *
+ * Postgres write-ahead log manager record pointer and
+ * timeline number definitions
+ *
+ * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/xlogdefs.h
+ */
+#ifndef XLOG_DEFS_H
+#define XLOG_DEFS_H
+
+#include <fcntl.h>				/* need open() flags */
+
+/*
+ * Pointer to a location in the XLOG.  These pointers are 64 bits wide,
+ * because we don't want them ever to overflow.
+ */
+typedef uint64 XLogRecPtr;
+
+/*
+ * Zero is used indicate an invalid pointer. Bootstrap skips the first possible
+ * WAL segment, initializing the first WAL page at WAL segment size, so no XLOG
+ * record can begin at zero.
+ */
+#define InvalidXLogRecPtr	0
+#define XLogRecPtrIsInvalid(r)	((r) == InvalidXLogRecPtr)
+
+/*
+ * First LSN to use for "fake" LSNs.
+ *
+ * Values smaller than this can be used for special per-AM purposes.
+ */
+#define FirstNormalUnloggedLSN	((XLogRecPtr) 1000)
+
+/*
+ * Handy macro for printing XLogRecPtr in conventional format, e.g.,
+ *
+ * printf("%X/%X", LSN_FORMAT_ARGS(lsn));
+ */
+#define LSN_FORMAT_ARGS(lsn) (AssertVariableIsOfTypeMacro((lsn), XLogRecPtr), (uint32) ((lsn) >> 32)), ((uint32) (lsn))
+
+/*
+ * XLogSegNo - physical log file sequence number.
+ */
+typedef uint64 XLogSegNo;
+
+/*
+ * TimeLineID (TLI) - identifies different database histories to prevent
+ * confusion after restoring a prior state of a database installation.
+ * TLI does not change in a normal stop/restart of the database (including
+ * crash-and-recover cases); but we must assign a new TLI after doing
+ * a recovery to a prior state, a/k/a point-in-time recovery.  This makes
+ * the new WAL logfile sequence we generate distinguishable from the
+ * sequence that was generated in the previous incarnation.
+ */
+typedef uint32 TimeLineID;
+
+/*
+ * Replication origin id - this is located in this file to avoid having to
+ * include origin.h in a bunch of xlog related places.
+ */
+typedef uint16 RepOriginId;
+
+/*
+ * This chunk of hackery attempts to determine which file sync methods
+ * are available on the current platform, and to choose an appropriate
+ * default method.  We assume that fsync() is always available, and that
+ * configure determined whether fdatasync() is.
+ */
+#if defined(O_SYNC)
+#define OPEN_SYNC_FLAG		O_SYNC
+#elif defined(O_FSYNC)
+#define OPEN_SYNC_FLAG		O_FSYNC
+#endif
+
+#if defined(O_DSYNC)
+#if defined(OPEN_SYNC_FLAG)
+/* O_DSYNC is distinct? */
+#if O_DSYNC != OPEN_SYNC_FLAG
+#define OPEN_DATASYNC_FLAG		O_DSYNC
+#endif
+#else							/* !defined(OPEN_SYNC_FLAG) */
+/* Win32 only has O_DSYNC */
+#define OPEN_DATASYNC_FLAG		O_DSYNC
+#endif
+#endif
+
+#if defined(PLATFORM_DEFAULT_SYNC_METHOD)
+#define DEFAULT_SYNC_METHOD		PLATFORM_DEFAULT_SYNC_METHOD
+#elif defined(OPEN_DATASYNC_FLAG)
+#define DEFAULT_SYNC_METHOD		SYNC_METHOD_OPEN_DSYNC
+#elif defined(HAVE_FDATASYNC)
+#define DEFAULT_SYNC_METHOD		SYNC_METHOD_FDATASYNC
+#else
+#define DEFAULT_SYNC_METHOD		SYNC_METHOD_FSYNC
+#endif
+
+#endif							/* XLOG_DEFS_H */

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xloginsert.h

@@ -0,0 +1,66 @@
+/*
+ * xloginsert.h
+ *
+ * Functions for generating WAL records
+ *
+ * Portions Copyright (c) 1996-2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * src/include/access/xloginsert.h
+ */
+#ifndef XLOGINSERT_H
+#define XLOGINSERT_H
+
+#include "access/rmgr.h"
+#include "access/xlogdefs.h"
+#include "storage/block.h"
+#include "storage/buf.h"
+#include "storage/relfilenode.h"
+#include "utils/relcache.h"
+
+/*
+ * The minimum size of the WAL construction working area. If you need to
+ * register more than XLR_NORMAL_MAX_BLOCK_ID block references or have more
+ * than XLR_NORMAL_RDATAS data chunks in a single WAL record, you must call
+ * XLogEnsureRecordSpace() first to allocate more working memory.
+ */
+#define XLR_NORMAL_MAX_BLOCK_ID		4
+#define XLR_NORMAL_RDATAS			20
+
+/* flags for XLogRegisterBuffer */
+#define REGBUF_FORCE_IMAGE	0x01	/* force a full-page image */
+#define REGBUF_NO_IMAGE		0x02	/* don't take a full-page image */
+#define REGBUF_WILL_INIT	(0x04 | 0x02)	/* page will be re-initialized at
+											 * replay (implies NO_IMAGE) */
+#define REGBUF_STANDARD		0x08	/* page follows "standard" page layout,
+									 * (data between pd_lower and pd_upper
+									 * will be skipped) */
+#define REGBUF_KEEP_DATA	0x10	/* include data even if a full-page image
+									 * is taken */
+
+/* prototypes for public functions in xloginsert.c: */
+extern void XLogBeginInsert(void);
+extern void XLogSetRecordFlags(uint8 flags);
+extern XLogRecPtr XLogInsert(RmgrId rmid, uint8 info);
+extern void XLogEnsureRecordSpace(int max_block_id, int ndatas);
+extern void XLogRegisterData(char *data, int len);
+extern void XLogRegisterBuffer(uint8 block_id, Buffer buffer, uint8 flags);
+extern void XLogRegisterBlock(uint8 block_id, RelFileNode *rnode,
+							  ForkNumber forknum, BlockNumber blknum, char *page,
+							  uint8 flags);
+extern void XLogRegisterBufData(uint8 block_id, char *data, int len);
+extern void XLogResetInsertion(void);
+extern bool XLogCheckBufferNeedsBackup(Buffer buffer);
+
+extern XLogRecPtr log_newpage(RelFileNode *rnode, ForkNumber forkNum,
+							  BlockNumber blk, char *page, bool page_std);
+extern void log_newpages(RelFileNode *rnode, ForkNumber forkNum, int num_pages,
+						 BlockNumber *blknos, char **pages, bool page_std);
+extern XLogRecPtr log_newpage_buffer(Buffer buffer, bool page_std);
+extern void log_newpage_range(Relation rel, ForkNumber forkNum,
+							  BlockNumber startblk, BlockNumber endblk, bool page_std);
+extern XLogRecPtr XLogSaveBufferForHint(Buffer buffer, bool buffer_std);
+
+extern void InitXLogInsert(void);
+
+#endif							/* XLOGINSERT_H */

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogprefetcher.h

@@ -0,0 +1,55 @@
+/*-------------------------------------------------------------------------
+ *
+ * xlogprefetcher.h
+ *		Declarations for the recovery prefetching module.
+ *
+ * Portions Copyright (c) 2022, PostgreSQL Global Development Group
+ * Portions Copyright (c) 1994, Regents of the University of California
+ *
+ * IDENTIFICATION
+ *		src/include/access/xlogprefetcher.h
+ *-------------------------------------------------------------------------
+ */
+#ifndef XLOGPREFETCHER_H
+#define XLOGPREFETCHER_H
+
+#include "access/xlogdefs.h"
+#include "access/xlogreader.h"
+#include "access/xlogrecord.h"
+
+/* GUCs */
+extern PGDLLIMPORT int recovery_prefetch;
+
+/* Possible values for recovery_prefetch */
+typedef enum
+{
+	RECOVERY_PREFETCH_OFF,
+	RECOVERY_PREFETCH_ON,
+	RECOVERY_PREFETCH_TRY
+}			RecoveryPrefetchValue;
+
+struct XLogPrefetcher;
+typedef struct XLogPrefetcher XLogPrefetcher;
+
+
+extern void XLogPrefetchReconfigure(void);
+
+extern size_t XLogPrefetchShmemSize(void);
+extern void XLogPrefetchShmemInit(void);
+
+extern void XLogPrefetchResetStats(void);
+
+extern XLogPrefetcher *XLogPrefetcherAllocate(XLogReaderState *reader);
+extern void XLogPrefetcherFree(XLogPrefetcher *prefetcher);
+
+extern XLogReaderState *XLogPrefetcherGetReader(XLogPrefetcher *prefetcher);
+
+extern void XLogPrefetcherBeginRead(XLogPrefetcher *prefetcher,
+									XLogRecPtr recPtr);
+
+extern XLogRecord *XLogPrefetcherReadRecord(XLogPrefetcher *prefetcher,
+											char **errmsg);
+
+extern void XLogPrefetcherComputeStats(XLogPrefetcher *prefetcher);
+
+#endif

data/ext/yb_ddl_parser/vendor/yugabyte-postgres/src/include/access/xlogreader.h

@@ -0,0 +1,450 @@
+/*-------------------------------------------------------------------------
+ *
+ * xlogreader.h
+ *		Definitions for the generic XLog reading facility
+ *
+ * Portions Copyright (c) 2013-2022, PostgreSQL Global Development Group
+ *
+ * IDENTIFICATION
+ *		src/include/access/xlogreader.h
+ *
+ * NOTES
+ *		See the definition of the XLogReaderState struct for instructions on
+ *		how to use the XLogReader infrastructure.
+ *
+ *		The basic idea is to allocate an XLogReaderState via
+ *		XLogReaderAllocate(), position the reader to the first record with
+ *		XLogBeginRead() or XLogFindNextRecord(), and call XLogReadRecord()
+ *		until it returns NULL.
+ *
+ *		Callers supply a page_read callback if they want to call
+ *		XLogReadRecord or XLogFindNextRecord; it can be passed in as NULL
+ *		otherwise.  The WALRead function can be used as a helper to write
+ *		page_read callbacks, but it is not mandatory; callers that use it,
+ *		must supply segment_open callbacks.  The segment_close callback
+ *		must always be supplied.
+ *
+ *		After reading a record with XLogReadRecord(), it's decomposed into
+ *		the per-block and main data parts, and the parts can be accessed
+ *		with the XLogRec* macros and functions. You can also decode a
+ *		record that's already constructed in memory, without reading from
+ *		disk, by calling the DecodeXLogRecord() function.
+ *-------------------------------------------------------------------------
+ */
+#ifndef XLOGREADER_H
+#define XLOGREADER_H
+
+#ifndef FRONTEND
+#include "access/transam.h"
+#endif
+
+#include "access/xlogrecord.h"
+#include "storage/buf.h"
+
+/* YB includes */
+#include "replication/yb_virtual_wal_client_typedefs.h"
+
+/* WALOpenSegment represents a WAL segment being read. */
+typedef struct WALOpenSegment
+{
+	int			ws_file;		/* segment file descriptor */
+	XLogSegNo	ws_segno;		/* segment number */
+	TimeLineID	ws_tli;			/* timeline ID of the currently open file */
+} WALOpenSegment;
+
+/* WALSegmentContext carries context information about WAL segments to read */
+typedef struct WALSegmentContext
+{
+	char		ws_dir[MAXPGPATH];
+	int			ws_segsize;
+} WALSegmentContext;
+
+typedef struct XLogReaderState XLogReaderState;
+
+/* Function type definitions for various xlogreader interactions */
+typedef int (*XLogPageReadCB) (XLogReaderState *xlogreader,
+							   XLogRecPtr targetPagePtr,
+							   int reqLen,
+							   XLogRecPtr targetRecPtr,
+							   char *readBuf);
+typedef void (*WALSegmentOpenCB) (XLogReaderState *xlogreader,
+								  XLogSegNo nextSegNo,
+								  TimeLineID *tli_p);
+typedef void (*WALSegmentCloseCB) (XLogReaderState *xlogreader);
+
+typedef struct XLogReaderRoutine
+{
+	/*
+	 * Data input callback
+	 *
+	 * This callback shall read at least reqLen valid bytes of the xlog page
+	 * starting at targetPagePtr, and store them in readBuf.  The callback
+	 * shall return the number of bytes read (never more than XLOG_BLCKSZ), or
+	 * -1 on failure.  The callback shall sleep, if necessary, to wait for the
+	 * requested bytes to become available.  The callback will not be invoked
+	 * again for the same page unless more than the returned number of bytes
+	 * are needed.
+	 *
+	 * targetRecPtr is the position of the WAL record we're reading.  Usually
+	 * it is equal to targetPagePtr + reqLen, but sometimes xlogreader needs
+	 * to read and verify the page or segment header, before it reads the
+	 * actual WAL record it's interested in.  In that case, targetRecPtr can
+	 * be used to determine which timeline to read the page from.
+	 *
+	 * The callback shall set ->seg.ws_tli to the TLI of the file the page was
+	 * read from.
+	 */
+	XLogPageReadCB page_read;
+
+	/*
+	 * Callback to open the specified WAL segment for reading.  ->seg.ws_file
+	 * shall be set to the file descriptor of the opened segment.  In case of
+	 * failure, an error shall be raised by the callback and it shall not
+	 * return.
+	 *
+	 * "nextSegNo" is the number of the segment to be opened.
+	 *
+	 * "tli_p" is an input/output argument. WALRead() uses it to pass the
+	 * timeline in which the new segment should be found, but the callback can
+	 * use it to return the TLI that it actually opened.
+	 */
+	WALSegmentOpenCB segment_open;
+
+	/*
+	 * WAL segment close callback.  ->seg.ws_file shall be set to a negative
+	 * number.
+	 */
+	WALSegmentCloseCB segment_close;
+} XLogReaderRoutine;
+
+#define XL_ROUTINE(...) &(XLogReaderRoutine){__VA_ARGS__}
+
+typedef struct
+{
+	/* Is this block ref in use? */
+	bool		in_use;
+
+	/* Identify the block this refers to */
+	RelFileNode rnode;
+	ForkNumber	forknum;
+	BlockNumber blkno;
+
+	/* Prefetching workspace. */
+	Buffer		prefetch_buffer;
+
+	/* copy of the fork_flags field from the XLogRecordBlockHeader */
+	uint8		flags;
+
+	/* Information on full-page image, if any */
+	bool		has_image;		/* has image, even for consistency checking */
+	bool		apply_image;	/* has image that should be restored */
+	char	   *bkp_image;
+	uint16		hole_offset;
+	uint16		hole_length;
+	uint16		bimg_len;
+	uint8		bimg_info;
+
+	/* Buffer holding the rmgr-specific data associated with this block */
+	bool		has_data;
+	char	   *data;
+	uint16		data_len;
+	uint16		data_bufsz;
+} DecodedBkpBlock;
+
+/*
+ * The decoded contents of a record.  This occupies a contiguous region of
+ * memory, with main_data and blocks[n].data pointing to memory after the
+ * members declared here.
+ */
+typedef struct DecodedXLogRecord
+{
+	/* Private member used for resource management. */
+	size_t		size;			/* total size of decoded record */
+	bool		oversized;		/* outside the regular decode buffer? */
+	struct DecodedXLogRecord *next; /* decoded record queue link */
+
+	/* Public members. */
+	XLogRecPtr	lsn;			/* location */
+	XLogRecPtr	next_lsn;		/* location of next record */
+	XLogRecord	header;			/* header */
+	RepOriginId record_origin;
+	TransactionId toplevel_xid; /* XID of top-level transaction */
+	char	   *main_data;		/* record's main data portion */
+	uint32		main_data_len;	/* main data portion's length */
+	int			max_block_id;	/* highest block_id in use (-1 if none) */
+	DecodedBkpBlock blocks[FLEXIBLE_ARRAY_MEMBER];
+} DecodedXLogRecord;
+
+struct XLogReaderState
+{
+	/*
+	 * Operational callbacks
+	 */
+	XLogReaderRoutine routine;
+
+	/* ----------------------------------------
+	 * Public parameters
+	 * ----------------------------------------
+	 */
+
+	/*
+	 * System identifier of the xlog files we're about to read.  Set to zero
+	 * (the default value) if unknown or unimportant.
+	 */
+	uint64		system_identifier;
+
+	/*
+	 * Opaque data for callbacks to use.  Not used by XLogReader.
+	 */
+	void	   *private_data;
+
+	/*
+	 * Start and end point of last record read.  EndRecPtr is also used as the
+	 * position to read next.  Calling XLogBeginRead() sets EndRecPtr to the
+	 * starting position and ReadRecPtr to invalid.
+	 *
+	 * Start and end point of last record returned by XLogReadRecord().  These
+	 * are also available as record->lsn and record->next_lsn.
+	 */
+	XLogRecPtr	ReadRecPtr;		/* start of last record read */
+	XLogRecPtr	EndRecPtr;		/* end+1 of last record read */
+
+	/*
+	 * Set at the end of recovery: the start point of a partial record at the
+	 * end of WAL (InvalidXLogRecPtr if there wasn't one), and the start
+	 * location of its first contrecord that went missing.
+	 */
+	XLogRecPtr	abortedRecPtr;
+	XLogRecPtr	missingContrecPtr;
+	/* Set when XLP_FIRST_IS_OVERWRITE_CONTRECORD is found */
+	XLogRecPtr	overwrittenRecPtr;
+
+
+	/* ----------------------------------------
+	 * Decoded representation of current record
+	 *
+	 * Use XLogRecGet* functions to investigate the record; these fields
+	 * should not be accessed directly.
+	 * ----------------------------------------
+	 * Start and end point of the last record read and decoded by
+	 * XLogReadRecordInternal().  NextRecPtr is also used as the position to
+	 * decode next.  Calling XLogBeginRead() sets NextRecPtr and EndRecPtr to
+	 * the requested starting position.
+	 */
+	XLogRecPtr	DecodeRecPtr;	/* start of last record decoded */
+	XLogRecPtr	NextRecPtr;		/* end+1 of last record decoded */
+	XLogRecPtr	PrevRecPtr;		/* start of previous record decoded */
+
+	/* Last record returned by XLogReadRecord(). */
+	DecodedXLogRecord *record;
+
+	YbVirtualWalRecord *yb_virtual_wal_record;
+
+	/* ----------------------------------------
+	 * private/internal state
+	 * ----------------------------------------
+	 */
+
+	/*
+	 * Buffer for decoded records.  This is a circular buffer, though
+	 * individual records can't be split in the middle, so some space is often
+	 * wasted at the end.  Oversized records that don't fit in this space are
+	 * allocated separately.
+	 */
+	char	   *decode_buffer;
+	size_t		decode_buffer_size;
+	bool		free_decode_buffer; /* need to free? */
+	char	   *decode_buffer_head; /* data is read from the head */
+	char	   *decode_buffer_tail; /* new data is written at the tail */
+
+	/*
+	 * Queue of records that have been decoded.  This is a linked list that
+	 * usually consists of consecutive records in decode_buffer, but may also
+	 * contain oversized records allocated with palloc().
+	 */
+	DecodedXLogRecord *decode_queue_head;	/* oldest decoded record */
+	DecodedXLogRecord *decode_queue_tail;	/* newest decoded record */
+
+	/*
+	 * Buffer for currently read page (XLOG_BLCKSZ bytes, valid up to at least
+	 * readLen bytes)
+	 */
+	char	   *readBuf;
+	uint32		readLen;
+
+	/* last read XLOG position for data currently in readBuf */
+	WALSegmentContext segcxt;
+	WALOpenSegment seg;
+	uint32		segoff;
+
+	/*
+	 * beginning of prior page read, and its TLI.  Doesn't necessarily
+	 * correspond to what's in readBuf; used for timeline sanity checks.
+	 */
+	XLogRecPtr	latestPagePtr;
+	TimeLineID	latestPageTLI;
+
+	/* beginning of the WAL record being read. */
+	XLogRecPtr	currRecPtr;
+	/* timeline to read it from, 0 if a lookup is required */
+	TimeLineID	currTLI;
+
+	/*
+	 * Safe point to read to in currTLI if current TLI is historical
+	 * (tliSwitchPoint) or InvalidXLogRecPtr if on current timeline.
+	 *
+	 * Actually set to the start of the segment containing the timeline switch
+	 * that ends currTLI's validity, not the LSN of the switch its self, since
+	 * we can't assume the old segment will be present.
+	 */
+	XLogRecPtr	currTLIValidUntil;
+
+	/*
+	 * If currTLI is not the most recent known timeline, the next timeline to
+	 * read from when currTLIValidUntil is reached.
+	 */
+	TimeLineID	nextTLI;
+
+	/*
+	 * Buffer for current ReadRecord result (expandable), used when a record
+	 * crosses a page boundary.
+	 */
+	char	   *readRecordBuf;
+	uint32		readRecordBufSize;
+
+	/* Buffer to hold error message */
+	char	   *errormsg_buf;
+	bool		errormsg_deferred;
+
+	/*
+	 * Flag to indicate to XLogPageReadCB that it should not block waiting for
+	 * data.
+	 */
+	bool		nonblocking;
+};
+
+/*
+ * Check if XLogNextRecord() has any more queued records or an error to return.
+ */
+static inline bool
+XLogReaderHasQueuedRecordOrError(XLogReaderState *state)
+{
+	return (state->decode_queue_head != NULL) || state->errormsg_deferred;
+}
+
+/* Get a new XLogReader */
+extern XLogReaderState *XLogReaderAllocate(int wal_segment_size,
+										   const char *waldir,
+										   XLogReaderRoutine *routine,
+										   void *private_data);
+extern XLogReaderRoutine *LocalXLogReaderRoutine(void);
+
+/* Free an XLogReader */
+extern void XLogReaderFree(XLogReaderState *state);
+
+/* Optionally provide a circular decoding buffer to allow readahead. */
+extern void XLogReaderSetDecodeBuffer(XLogReaderState *state,
+									  void *buffer,
+									  size_t size);
+
+/* Position the XLogReader to given record */
+extern void XLogBeginRead(XLogReaderState *state, XLogRecPtr RecPtr);
+extern XLogRecPtr XLogFindNextRecord(XLogReaderState *state, XLogRecPtr RecPtr);
+
+/* Return values from XLogPageReadCB. */
+typedef enum XLogPageReadResult
+{
+	XLREAD_SUCCESS = 0,			/* record is successfully read */
+	XLREAD_FAIL = -1,			/* failed during reading a record */
+	XLREAD_WOULDBLOCK = -2		/* nonblocking mode only, no data */
+} XLogPageReadResult;
+
+/* Read the next XLog record. Returns NULL on end-of-WAL or failure */
+extern struct XLogRecord *XLogReadRecord(XLogReaderState *state,
+										 char **errormsg);
+
+/* Consume the next record or error. */
+extern DecodedXLogRecord *XLogNextRecord(XLogReaderState *state,
+										 char **errormsg);
+
+/* Release the previously returned record, if necessary. */
+extern XLogRecPtr XLogReleasePreviousRecord(XLogReaderState *state);
+
+/* Try to read ahead, if there is data and space. */
+extern DecodedXLogRecord *XLogReadAhead(XLogReaderState *state,
+										bool nonblocking);
+
+/* Validate a page */
+extern bool XLogReaderValidatePageHeader(XLogReaderState *state,
+										 XLogRecPtr recptr, char *phdr);
+
+/* Forget error produced by XLogReaderValidatePageHeader(). */
+extern void XLogReaderResetError(XLogReaderState *state);
+
+/*
+ * Error information from WALRead that both backend and frontend caller can
+ * process.  Currently only errors from pg_pread can be reported.
+ */
+typedef struct WALReadError
+{
+	int			wre_errno;		/* errno set by the last pg_pread() */
+	int			wre_off;		/* Offset we tried to read from. */
+	int			wre_req;		/* Bytes requested to be read. */
+	int			wre_read;		/* Bytes read by the last read(). */
+	WALOpenSegment wre_seg;		/* Segment we tried to read from. */
+} WALReadError;
+
+extern bool WALRead(XLogReaderState *state,
+					char *buf, XLogRecPtr startptr, Size count,
+					TimeLineID tli, WALReadError *errinfo);
+
+/* Functions for decoding an XLogRecord */
+
+extern size_t DecodeXLogRecordRequiredSpace(size_t xl_tot_len);
+extern bool DecodeXLogRecord(XLogReaderState *state,
+							 DecodedXLogRecord *decoded,
+							 XLogRecord *record,
+							 XLogRecPtr lsn,
+							 char **errmsg);
+
+/*
+ * Macros that provide access to parts of the record most recently returned by
+ * XLogReadRecord() or XLogNextRecord().
+ */
+#define XLogRecGetTotalLen(decoder) ((decoder)->record->header.xl_tot_len)
+#define XLogRecGetPrev(decoder) ((decoder)->record->header.xl_prev)
+#define XLogRecGetInfo(decoder) ((decoder)->record->header.xl_info)
+#define XLogRecGetRmid(decoder) ((decoder)->record->header.xl_rmid)
+#define XLogRecGetXid(decoder) ((decoder)->record->header.xl_xid)
+#define XLogRecGetOrigin(decoder) ((decoder)->record->record_origin)
+#define XLogRecGetTopXid(decoder) ((decoder)->record->toplevel_xid)
+#define XLogRecGetData(decoder) ((decoder)->record->main_data)
+#define XLogRecGetDataLen(decoder) ((decoder)->record->main_data_len)
+#define XLogRecHasAnyBlockRefs(decoder) ((decoder)->record->max_block_id >= 0)
+#define XLogRecMaxBlockId(decoder) ((decoder)->record->max_block_id)
+#define XLogRecGetBlock(decoder, i) (&(decoder)->record->blocks[(i)])
+#define XLogRecHasBlockRef(decoder, block_id)			\
+	(((decoder)->record->max_block_id >= (block_id)) &&	\
+	 ((decoder)->record->blocks[block_id].in_use))
+#define XLogRecHasBlockImage(decoder, block_id)		\
+	((decoder)->record->blocks[block_id].has_image)
+#define XLogRecBlockImageApply(decoder, block_id)		\
+	((decoder)->record->blocks[block_id].apply_image)
+
+#ifndef FRONTEND
+extern FullTransactionId XLogRecGetFullXid(XLogReaderState *record);
+#endif
+
+extern bool RestoreBlockImage(XLogReaderState *record, uint8 block_id, char *page);
+extern char *XLogRecGetBlockData(XLogReaderState *record, uint8 block_id, Size *len);
+extern void XLogRecGetBlockTag(XLogReaderState *record, uint8 block_id,
+							   RelFileNode *rnode, ForkNumber *forknum,
+							   BlockNumber *blknum);
+extern bool XLogRecGetBlockTagExtended(XLogReaderState *record, uint8 block_id,
+									   RelFileNode *rnode, ForkNumber *forknum,
+									   BlockNumber *blknum,
+									   Buffer *prefetch_buffer);
+
+extern void YBResetDecoder(XLogReaderState *state);
+
+#endif							/* XLOGREADER_H */