xmlsec-shim 1.2.18.1

data/vendor/xmlsec1-1.2.18/Makefile.in

@@ -0,0 +1,1155 @@
+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
+	$(srcdir)/xmlsec-config.in $(srcdir)/xmlsec-gcrypt.pc.in \
+	$(srcdir)/xmlsec-gnutls.pc.in $(srcdir)/xmlsec-nss.pc.in \
+	$(srcdir)/xmlsec-openssl.pc.in $(srcdir)/xmlsec.pc.in \
+	$(srcdir)/xmlsec.spec.in $(srcdir)/xmlsecConf.sh.in \
+	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
+	TODO config.guess config.sub depcomp install-sh ltmain.sh \
+	missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = config.h
+CONFIG_CLEAN_FILES = xmlsec1.pc xmlsec1Conf.sh xmlsec1-config \
+	xmlsec1-openssl.pc xmlsec1-gnutls.pc xmlsec1-gcrypt.pc \
+	xmlsec1-nss.pc xmlsec1.spec
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" \
+	"$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"
+SCRIPTS = $(bin_SCRIPTS)
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+	html-recursive info-recursive install-data-recursive \
+	install-dvi-recursive install-exec-recursive \
+	install-html-recursive install-info-recursive \
+	install-pdf-recursive install-ps-recursive install-recursive \
+	installcheck-recursive installdirs-recursive pdf-recursive \
+	ps-recursive uninstall-recursive
+DATA = $(confexec_DATA) $(m4data_DATA) $(pkgconfig_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
+	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
+	distdir dist dist-all distcheck
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CP = @CP@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GCRYPT_CFLAGS = @GCRYPT_CFLAGS@
+GCRYPT_CRYPTO_LIB = @GCRYPT_CRYPTO_LIB@
+GCRYPT_LIBS = @GCRYPT_LIBS@
+GCRYPT_MIN_VERSION = @GCRYPT_MIN_VERSION@
+GNUTLS_CFLAGS = @GNUTLS_CFLAGS@
+GNUTLS_CRYPTO_LIB = @GNUTLS_CRYPTO_LIB@
+GNUTLS_LIBS = @GNUTLS_LIBS@
+GNUTLS_MIN_VERSION = @GNUTLS_MIN_VERSION@
+GREP = @GREP@
+HELP2MAN = @HELP2MAN@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIBXML_CFLAGS = @LIBXML_CFLAGS@
+LIBXML_CONFIG = @LIBXML_CONFIG@
+LIBXML_LIBS = @LIBXML_LIBS@
+LIBXML_MIN_VERSION = @LIBXML_MIN_VERSION@
+LIBXSLT_CFLAGS = @LIBXSLT_CFLAGS@
+LIBXSLT_CONFIG = @LIBXSLT_CONFIG@
+LIBXSLT_LIBS = @LIBXSLT_LIBS@
+LIBXSLT_MIN_VERSION = @LIBXSLT_MIN_VERSION@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MAN2HTML = @MAN2HTML@
+MKDIR_P = @MKDIR_P@
+MOZILLA_MIN_VERSION = @MOZILLA_MIN_VERSION@
+MSCRYPTO_CFLAGS = @MSCRYPTO_CFLAGS@
+MSCRYPTO_CRYPTO_LIB = @MSCRYPTO_CRYPTO_LIB@
+MSCRYPTO_LIBS = @MSCRYPTO_LIBS@
+MV = @MV@
+NM = @NM@
+NMEDIT = @NMEDIT@
+NSPR_MIN_VERSION = @NSPR_MIN_VERSION@
+NSPR_PACKAGE = @NSPR_PACKAGE@
+NSS_CFLAGS = @NSS_CFLAGS@
+NSS_CRYPTO_LIB = @NSS_CRYPTO_LIB@
+NSS_LIBS = @NSS_LIBS@
+NSS_MIN_VERSION = @NSS_MIN_VERSION@
+NSS_PACKAGE = @NSS_PACKAGE@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OPENSSL_CFLAGS = @OPENSSL_CFLAGS@
+OPENSSL_CRYPTO_LIB = @OPENSSL_CRYPTO_LIB@
+OPENSSL_LIBS = @OPENSSL_LIBS@
+OPENSSL_MIN_VERSION = @OPENSSL_MIN_VERSION@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PKGCONFIG_PRESENT = @PKGCONFIG_PRESENT@
+PKG_CONFIG = @PKG_CONFIG@
+PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
+PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
+RANLIB = @RANLIB@
+RM = @RM@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TAR = @TAR@
+U = @U@
+VERSION = @VERSION@
+XMLSEC_APP_DEFINES = @XMLSEC_APP_DEFINES@
+XMLSEC_CFLAGS = @XMLSEC_CFLAGS@
+XMLSEC_CORE_CFLAGS = @XMLSEC_CORE_CFLAGS@
+XMLSEC_CORE_LIBS = @XMLSEC_CORE_LIBS@
+XMLSEC_CRYPTO = @XMLSEC_CRYPTO@
+XMLSEC_CRYPTO_CFLAGS = @XMLSEC_CRYPTO_CFLAGS@
+XMLSEC_CRYPTO_DISABLED_LIST = @XMLSEC_CRYPTO_DISABLED_LIST@
+XMLSEC_CRYPTO_EXTRA_LDFLAGS = @XMLSEC_CRYPTO_EXTRA_LDFLAGS@
+XMLSEC_CRYPTO_LIB = @XMLSEC_CRYPTO_LIB@
+XMLSEC_CRYPTO_LIBS = @XMLSEC_CRYPTO_LIBS@
+XMLSEC_CRYPTO_LIST = @XMLSEC_CRYPTO_LIST@
+XMLSEC_CRYPTO_PC_FILES_LIST = @XMLSEC_CRYPTO_PC_FILES_LIST@
+XMLSEC_DEFINES = @XMLSEC_DEFINES@
+XMLSEC_DL_INCLUDES = @XMLSEC_DL_INCLUDES@
+XMLSEC_DL_LIBS = @XMLSEC_DL_LIBS@
+XMLSEC_DOCDIR = @XMLSEC_DOCDIR@
+XMLSEC_EXTRA_LDFLAGS = @XMLSEC_EXTRA_LDFLAGS@
+XMLSEC_GCRYPT_CFLAGS = @XMLSEC_GCRYPT_CFLAGS@
+XMLSEC_GCRYPT_LIBS = @XMLSEC_GCRYPT_LIBS@
+XMLSEC_GNUTLS_CFLAGS = @XMLSEC_GNUTLS_CFLAGS@
+XMLSEC_GNUTLS_LIBS = @XMLSEC_GNUTLS_LIBS@
+XMLSEC_LIBDIR = @XMLSEC_LIBDIR@
+XMLSEC_LIBS = @XMLSEC_LIBS@
+XMLSEC_NO_AES = @XMLSEC_NO_AES@
+XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING = @XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING@
+XMLSEC_NO_CRYPTO_DYNAMIC_LOADING = @XMLSEC_NO_CRYPTO_DYNAMIC_LOADING@
+XMLSEC_NO_DES = @XMLSEC_NO_DES@
+XMLSEC_NO_DSA = @XMLSEC_NO_DSA@
+XMLSEC_NO_GCRYPT = @XMLSEC_NO_GCRYPT@
+XMLSEC_NO_GNUTLS = @XMLSEC_NO_GNUTLS@
+XMLSEC_NO_GOST = @XMLSEC_NO_GOST@
+XMLSEC_NO_HMAC = @XMLSEC_NO_HMAC@
+XMLSEC_NO_LIBXSLT = @XMLSEC_NO_LIBXSLT@
+XMLSEC_NO_MD5 = @XMLSEC_NO_MD5@
+XMLSEC_NO_MSCRYPTO = @XMLSEC_NO_MSCRYPTO@
+XMLSEC_NO_NSS = @XMLSEC_NO_NSS@
+XMLSEC_NO_OPENSSL = @XMLSEC_NO_OPENSSL@
+XMLSEC_NO_RIPEMD160 = @XMLSEC_NO_RIPEMD160@
+XMLSEC_NO_RSA = @XMLSEC_NO_RSA@
+XMLSEC_NO_SHA1 = @XMLSEC_NO_SHA1@
+XMLSEC_NO_SHA224 = @XMLSEC_NO_SHA224@
+XMLSEC_NO_SHA256 = @XMLSEC_NO_SHA256@
+XMLSEC_NO_SHA384 = @XMLSEC_NO_SHA384@
+XMLSEC_NO_SHA512 = @XMLSEC_NO_SHA512@
+XMLSEC_NO_X509 = @XMLSEC_NO_X509@
+XMLSEC_NO_XKMS = @XMLSEC_NO_XKMS@
+XMLSEC_NO_XMLDSIG = @XMLSEC_NO_XMLDSIG@
+XMLSEC_NO_XMLENC = @XMLSEC_NO_XMLENC@
+XMLSEC_NSS_CFLAGS = @XMLSEC_NSS_CFLAGS@
+XMLSEC_NSS_LIBS = @XMLSEC_NSS_LIBS@
+XMLSEC_OPENSSL_CFLAGS = @XMLSEC_OPENSSL_CFLAGS@
+XMLSEC_OPENSSL_LIBS = @XMLSEC_OPENSSL_LIBS@
+XMLSEC_PACKAGE = @XMLSEC_PACKAGE@
+XMLSEC_STATIC_BINARIES = @XMLSEC_STATIC_BINARIES@
+XMLSEC_VERSION = @XMLSEC_VERSION@
+XMLSEC_VERSION_INFO = @XMLSEC_VERSION_INFO@
+XMLSEC_VERSION_MAJOR = @XMLSEC_VERSION_MAJOR@
+XMLSEC_VERSION_MINOR = @XMLSEC_VERSION_MINOR@
+XMLSEC_VERSION_SAFE = @XMLSEC_VERSION_SAFE@
+XMLSEC_VERSION_SUBMINOR = @XMLSEC_VERSION_SUBMINOR@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+NULL = 
+SAFE_VERSION = @XMLSEC_VERSION_SAFE@
+SUBDIRS = include src apps man docs
+TEST_APP = apps/xmlsec1$(EXEEXT)
+DEFAULT_CRYPTO = @XMLSEC_CRYPTO@
+bin_SCRIPTS = xmlsec1-config
+pkgconfig_DATA = xmlsec1.pc @XMLSEC_CRYPTO_PC_FILES_LIST@
+pkgconfigdir = $(libdir)/pkgconfig
+confexecdir = $(libdir)
+confexec_DATA = xmlsec1Conf.sh
+m4datadir = $(datadir)/aclocal
+m4data_DATA = xmlsec1.m4
+ACLOCAL_AMFLAGS = -I m4
+DISTCLEANFILES = \
+	xmlsec1Conf.sh \
+	xmlsec1.pc \
+	xmlsec1-openssl.pc \
+	xmlsec1-nss.pc \
+	xmlsec1-gnutls.pc \
+	xmlsec1-gcrypt.pc \
+	xmlsec1-config \
+	xmlsec1.spec \
+	stamp-h2 \
+	stamp-h3 \
+	stamp-h4 \
+	stamp-h5 \
+	$NULL
+
+EXTRA_DIST = \
+	m4 \
+	examples \
+	scripts \
+	tests \
+	win32 \
+	NEWS \
+	ChangeLog \
+	Copyright \
+	HACKING \
+	xmlsec-openssl.pc.in \
+	xmlsec-nss.pc.in\
+	xmlsec-gnutls.pc.in \
+	xmlsec-gcrypt.pc.in \
+	xmlsec-config.in \
+	xmlsecConf.sh.in \
+	xmlsec.spec.in \
+	xmlsec1Conf.sh \
+	xmlsec1.pc @XMLSEC_CRYPTO_PC_FILES_LIST@ \
+	xmlsec1-config \
+	xmlsec1.spec \
+	xmlsec1.m4 \
+	$(NULL)
+
+EXTRA_CLEAN = \
+	examples \
+	$(NULL)
+
+ABS_SRCDIR = @abs_srcdir@
+ABS_BUILDDIR = @abs_builddir@
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@PRECHECK_COMMANDS = \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	for i in $(XMLSEC_CRYPTO_LIST) ; do \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	    export LD_LIBRARY_PATH="$(ABS_BUILDDIR)/src/$$i/.libs:$$LD_LIBRARY_PATH" ; \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	done && \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	cd $(ABS_SRCDIR) \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_FALSE@	$(NULL)	
+
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@PRECHECK_COMMANDS = \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@	cd $(ABS_SRCDIR) \
+@XMLSEC_NO_APPS_CRYPTO_DYNAMIC_LOADING_TRUE@	$(NULL)
+
+CHECK_CRYPTO_LIST = \
+	$(XMLSEC_CRYPTO_LIST) \
+	$(NULL)
+
+all: config.h
+	$(MAKE) $(AM_MAKEFLAGS) all-recursive
+
+.SUFFIXES:
+am--refresh:
+	@:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+
+config.h: stamp-h1
+	@if test ! -f $@; then \
+	  rm -f stamp-h1; \
+	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
+	else :; fi
+
+stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
+	@rm -f stamp-h1
+	cd $(top_builddir) && $(SHELL) ./config.status config.h
+$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
+	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	rm -f stamp-h1
+	touch $@
+
+distclean-hdr:
+	-rm -f config.h stamp-h1
+xmlsec1.pc: $(top_builddir)/config.status $(srcdir)/xmlsec.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1Conf.sh: $(top_builddir)/config.status $(srcdir)/xmlsecConf.sh.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-config: $(top_builddir)/config.status $(srcdir)/xmlsec-config.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-openssl.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-openssl.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-gnutls.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-gnutls.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-gcrypt.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-gcrypt.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1-nss.pc: $(top_builddir)/config.status $(srcdir)/xmlsec-nss.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+xmlsec1.spec: $(top_builddir)/config.status $(srcdir)/xmlsec.spec.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-binSCRIPTS: $(bin_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n' \
+	    -e 'h;s|.*|.|' \
+	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
+	      if (++n[d] == $(am__install_max)) { \
+		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
+	    else { print "f", d "/" $$4, $$1 } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	     test -z "$$files" || { \
+	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	     } \
+	; done
+
+uninstall-binSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	       sed -e 's,.*/,,;$(transform)'`; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-confexecDATA: $(confexec_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(confexecdir)" || $(MKDIR_P) "$(DESTDIR)$(confexecdir)"
+	@list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(confexecdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(confexecdir)" || exit $$?; \
+	done
+
+uninstall-confexecDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(confexec_DATA)'; test -n "$(confexecdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(confexecdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(confexecdir)" && rm -f $$files
+install-m4dataDATA: $(m4data_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(m4datadir)" || $(MKDIR_P) "$(DESTDIR)$(m4datadir)"
+	@list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(m4datadir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(m4datadir)" || exit $$?; \
+	done
+
+uninstall-m4dataDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(m4data_DATA)'; test -n "$(m4datadir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(m4datadir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(m4datadir)" && rm -f $$files
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+#     (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+$(RECURSIVE_CLEAN_TARGETS):
+	@fail= failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
+	dot_seen=no; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	rev=''; for subdir in $$list; do \
+	  if test "$$subdir" = "."; then :; else \
+	    rev="$$subdir $$rev"; \
+	  fi; \
+	done; \
+	rev="$$rev ."; \
+	target=`echo $@ | sed s/-recursive//`; \
+	for subdir in $$rev; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done && test -z "$$fail"
+tags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+	done
+ctags-recursive:
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+	done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test -d "$(distdir)/$$subdir" \
+	    || $(MKDIR_P) "$(distdir)/$$subdir" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+	$(MAKE) $(AM_MAKEFLAGS) \
+	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
+	  dist-hook
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(SCRIPTS) $(DATA) config.h
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(confexecdir)" "$(DESTDIR)$(m4datadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-m4dataDATA install-pkgconfigDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-binSCRIPTS install-confexecDATA
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-binSCRIPTS uninstall-confexecDATA \
+	uninstall-m4dataDATA uninstall-pkgconfigDATA
+
+.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
+	ctags-recursive install-am install-strip tags-recursive
+
+.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
+	all all-am am--refresh check check-am clean clean-generic \
+	clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \
+	dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-xz \
+	dist-zip distcheck distclean distclean-generic distclean-hdr \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binSCRIPTS install-confexecDATA \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-html install-html-am \
+	install-info install-info-am install-m4dataDATA install-man \
+	install-pdf install-pdf-am install-pkgconfigDATA install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-binSCRIPTS \
+	uninstall-confexecDATA uninstall-m4dataDATA \
+	uninstall-pkgconfigDATA
+
+
+docs: docs-man
+	@(cd docs && $(MAKE) docs)
+
+docs-clean: 
+	@(cd docs && $(MAKE) clean)
+
+docs-man: 
+	@(cd man && $(MAKE) docs)
+
+check: check-all check-info
+
+check-all: $(TEST_APP) 
+	@($(PRECHECK_COMMANDS) && \
+	for crypto in $(CHECK_CRYPTO_LIST) ; do \
+	    echo "=================== Checking xmlsec-$$crypto =================================" && \
+	    $(SHELL) ./tests/testrun.sh \
+	        $(ABS_SRCDIR)/tests/testKeys.sh \
+	        $$crypto \
+	        $(ABS_SRCDIR)/tests \
+	        $(ABS_BUILDDIR)/$(TEST_APP) der \
+	    && \
+	    $(SHELL) ./tests/testrun.sh \
+	        $(ABS_SRCDIR)/tests/testDSig.sh \
+	        $$crypto \
+	        $(ABS_SRCDIR)/tests \
+	        $(ABS_BUILDDIR)/$(TEST_APP) \
+	        der \
+	    && \
+	    $(SHELL) ./tests/testrun.sh \
+	        $(ABS_SRCDIR)/tests/testEnc.sh \
+	        $$crypto \
+	        $(ABS_SRCDIR)/tests \
+	        $(ABS_BUILDDIR)/$(TEST_APP) \
+	        der \
+	    ; \
+	done; )
+
+check-info:
+	@echo "---------------------------- ATTENTION -----------------------------------"
+	@echo "--- Some of the tests use resources located on external HTTP servers.  ---"
+	@echo "--- If you have no Internet connection or the external resource is not ---"
+	@echo "--- responding then the test will fail.                                ---"
+	@echo "---------------------------- ATTENTION -----------------------------------"
+
+check-keys: $(TEST_APP)
+	@($(PRECHECK_COMMANDS) && \
+	$(SHELL) ./tests/testrun.sh \
+	    $(ABS_SRCDIR)/tests/testKeys.sh \
+	    $(DEFAULT_CRYPTO) \
+	    $(ABS_SRCDIR)/tests \
+	    $(ABS_BUILDDIR)/$(TEST_APP) \
+	    der \
+	)
+
+check-dsig: $(TEST_APP) 	
+	@($(PRECHECK_COMMANDS) && \
+	$(SHELL) ./tests/testrun.sh \
+	    $(ABS_SRCDIR)/tests/testDSig.sh \
+	    $(DEFAULT_CRYPTO) \
+	    $(ABS_SRCDIR)/tests \
+	    $(ABS_BUILDDIR)/$(TEST_APP) \
+	    der \
+	)
+
+check-enc: $(TEST_APP) 
+	@($(PRECHECK_COMMANDS) && \
+	$(SHELL) ./tests/testrun.sh \
+	    $(ABS_SRCDIR)/tests/testEnc.sh  \
+	    $(DEFAULT_CRYPTO) \
+	    $(ABS_SRCDIR)/tests \
+	    $(ABS_BUILDDIR)/$(TEST_APP) \
+	    der \
+	)
+
+check-xkms: $(TEST_APP) 	
+	@($(PRECHECK_COMMANDS) && \
+	$(SHELL) ./tests/testrun.sh \
+	    $(ABS_SRCDIR)/tests/testXKMS.sh \
+	    $(DEFAULT_CRYPTO) \
+	    $(ABS_SRCDIR)/tests \
+	    $(ABS_BUILDDIR)/$(TEST_APP) \
+	    der \
+	)
+
+memcheck-res:
+	@grep -i 'ERROR SUMMARY' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'in use at exit' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+	@grep -i 'total heap usage' /tmp/*.log | sed 's/.*==.*== *//' | sort -u
+
+memcheck: $(TEST_APP)
+	@(export DEBUG_MEMORY=1 && $(MAKE) check && $(MAKE) memcheck-res)
+
+perfcheck: $(TEST_APP)
+	@(export PERF_TEST=10 && $(MAKE) check)
+
+dist-hook:
+
+cleantar:
+	@($(RM) -f xmlsec*.tar.gz COPYING.LIB)
+
+tar-release: clean cleantar
+	@(unset CDPATH && $(MAKE) dist)
+
+rpm: cleantar tar-release
+	@(unset CDPATH && rpmbuild -ta $(distdir).tar.gz)
+
+rpm-release: clean cleantar rpm
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT: