xmlsec-shim 1.2.18.1

data/vendor/xmlsec1-1.2.18/man/xmlsec1-config.1

@@ -0,0 +1,34 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.38.2.
+.TH XMLSEC1-CONFIG "1" "May 2011" "xmlsec1-config 1.2.18" "User Commands"
+.SH NAME
+xmlsec1-config \- detail installed version of xmlsec library
+.SH SYNOPSIS
+.B xmlsec1-config
+[\fIOPTION\fR]...
+.SH DESCRIPTION
+Known values for OPTION are:
+.TP
+\fB\-\-prefix\fR=\fIDIR\fR
+change XMLSEC prefix
+.TP
+\fB\-\-exec\-prefix\fR=\fIDIR\fR
+change XMLSEC executable prefix
+.TP
+\fB\-\-libs\fR
+print library linking information
+.TP
+\fB\-\-cflags\fR
+print pre\-processor and compiler flags
+.TP
+\fB\-\-crypto\fR
+print the default crypto library name
+.TP
+\fB\-\-help\fR
+display this help and exit
+.TP
+\fB\-\-version\fR
+output version information
+.TP
+\fB\-\-crypto\fR=\fILIB\fR
+configure with XMLSEC crypto library (one of the
+following: none default openssl nss gnutls gcrypt)

data/vendor/xmlsec1-1.2.18/man/xmlsec1.1

@@ -0,0 +1,269 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.38.2.
+.TH XMLSEC1 "1" "May 2011" "xmlsec1 1.2.18 (openssl)" "User Commands"
+.SH NAME
+xmlsec1 \- sign, verify, encrypt and decrypt XML documents
+.SH SYNOPSIS
+.B xmlsec
+\fI<command> \fR[\fI<options>\fR] [\fI<files>\fR]
+.SH DESCRIPTION
+xmlsec is a command line tool for signing, verifying, encrypting and
+decrypting XML documents. The allowed <command> values are:
+.TP
+\fB\-\-help\fR
+display this help information and exit
+.TP
+\fB\-\-help\-all\fR
+display help information for all commands/options and exit
+.TP
+\fB\-\-help\-\fR<cmd>
+display help information for command <cmd> and exit
+.TP
+\fB\-\-version\fR
+print version information and exit
+.TP
+\fB\-\-keys\fR
+keys XML file manipulation
+.TP
+\fB\-\-sign\fR
+sign data and output XML document
+.TP
+\fB\-\-verify\fR
+verify signed document
+.TP
+\fB\-\-sign\-tmpl\fR
+create and sign dynamicaly generated signature template
+.TP
+\fB\-\-encrypt\fR
+encrypt data and output XML document
+.TP
+\fB\-\-decrypt\fR
+decrypt data from XML document
+.SH OPTIONS
+.HP
+\fB\-\-ignore\-manifests\fR
+.IP
+do not process <dsig:Manifest> elements
+.HP
+\fB\-\-store\-references\fR
+.IP
+store and print the result of <dsig:Reference/> element processing
+just before calculating digest
+.HP
+\fB\-\-store\-signatures\fR
+.IP
+store and print the result of <dsig:Signature> processing
+just before calculating signature
+.HP
+\fB\-\-enabled\-reference\-uris\fR <list>
+.IP
+comma separated list of of the following values:
+"empty", "same\-doc", "local","remote" to restrict possible URI
+attribute values for the <dsig:Reference> element
+.HP
+\fB\-\-enable\-visa3d\-hack\fR
+.IP
+enables Visa3D protocol specific hack for URI attributes processing
+when we are trying not to use XPath/XPointer engine; this is a hack
+and I don't know what else might be broken in your application when
+you use it (also check "\-\-id\-attr" option because you might need it)
+.HP
+\fB\-\-binary\-data\fR <file>
+.IP
+binary <file> to encrypt
+.HP
+\fB\-\-xml\-data\fR <file>
+.IP
+XML <file> to encrypt
+.HP
+\fB\-\-enabled\-cipher\-reference\-uris\fR <list>
+.IP
+comma separated list of of the following values:
+"empty", "same\-doc", "local","remote" to restrict possible URI
+attribute values for the <enc:CipherReference> element
+.HP
+\fB\-\-session\-key\fR <keyKlass>\-<keySize>
+.IP
+generate new session <keyKlass> key of <keySize> bits size
+(for example, "\-\-session des\-192" generates a new 192 bits
+DES key for DES3 encryption)
+.HP
+\fB\-\-output\fR <filename>
+.IP
+write result document to file <filename>
+.HP
+\fB\-\-print\-debug\fR
+.IP
+print debug information to stdout
+.HP
+\fB\-\-print\-xml\-debug\fR
+.IP
+print debug information to stdout in xml format
+.HP
+\fB\-\-dtd\-file\fR <file>
+.IP
+load the specified file as the DTD
+.HP
+\fB\-\-node\-id\fR <id>
+.IP
+set the operation start point to the node with given <id>
+.HP
+\fB\-\-node\-name\fR [<namespace\-uri>:]<name>
+.IP
+set the operation start point to the first node
+with given <name> and <namespace> URI
+.HP
+\fB\-\-node\-xpath\fR <expr>
+.IP
+set the operation start point to the first node
+selected by the specified XPath expression
+.HP
+\fB\-\-id\-attr[\fR:<attr\-name>] [<node\-namespace\-uri>:]<node\-name>
+.IP
+adds attributes <attr\-name> (default value "id") from all nodes
+with<node\-name> and namespace <node\-namespace\-uri> to the list of
+known ID attributes; this is a hack and if you can use DTD or schema
+to declare ID attributes instead (see "\-\-dtd\-file" option),
+I don't know what else might be broken in your application when
+you use this hack
+.HP
+\fB\-\-enabled\-key\-data\fR <list>
+.IP
+comma separated list of enabled key data (list of
+registered key data klasses is available with "\-\-list\-key\-data"
+command); by default, all registered key data are enabled
+.HP
+\fB\-\-enabled\-retrieval\-uris\fR <list>
+.IP
+comma separated list of of the following values:
+"empty", "same\-doc", "local","remote" to restrict possible URI
+attribute values for the <dsig:RetrievalMethod> element.
+.HP
+\fB\-\-gen\-key[\fR:<name>] <keyKlass>\-<keySize>
+.IP
+generate new <keyKlass> key of <keySize> bits size,
+set the key name to <name> and add the result to keys
+manager (for example, "\-\-gen:mykey rsa\-1024" generates
+a new 1024 bits RSA key and sets it's name to "mykey")
+.HP
+\fB\-\-keys\-file\fR <file>
+.IP
+load keys from XML file
+.HP
+\fB\-\-privkey\-pem[\fR:<name>] <file>[,<cafile>[,<cafile>[...]]]
+.IP
+load private key from PEM file and certificates
+that verify this key
+.HP
+\fB\-\-privkey\-der[\fR:<name>] <file>[,<cafile>[,<cafile>[...]]]
+.IP
+load private key from DER file and certificates
+that verify this key
+.HP
+\fB\-\-pkcs8\-pem[\fR:<name>] <file>[,<cafile>[,<cafile>[...]]]
+.IP
+load private key from PKCS8 PEM file and PEM certificates
+that verify this key
+.HP
+\fB\-\-pkcs8\-der[\fR:<name>] <file>[,<cafile>[,<cafile>[...]]]
+.IP
+load private key from PKCS8 DER file and DER certificates
+that verify this key
+.HP
+\fB\-\-pubkey\-pem[\fR:<name>] <file>
+.IP
+load public key from PEM file
+.HP
+\fB\-\-pubkey\-der[\fR:<name>] <file>
+.IP
+load public key from DER file
+.HP
+\fB\-\-aeskey[\fR:<name>] <file>
+.IP
+load AES key from binary file <file>
+.HP
+\fB\-\-deskey[\fR:<name>] <file>
+.IP
+load DES key from binary file <file>
+.HP
+\fB\-\-hmackey[\fR:<name>] <file>
+.IP
+load HMAC key from binary file <file>
+.HP
+\fB\-\-pwd\fR <password>
+.IP
+the password to use for reading keys and certs
+.HP
+\fB\-\-pkcs12[\fR:<name>] <file>
+.IP
+load load private key from pkcs12 file <file>
+.HP
+\fB\-\-pubkey\-cert\-pem[\fR:<name>] <file>
+.IP
+load public key from PEM cert file
+.HP
+\fB\-\-pubkey\-cert\-der[\fR:<name>] <file>
+.IP
+load public key from DER cert file
+.HP
+\fB\-\-trusted\-pem\fR <file>
+.IP
+load trusted (root) certificate from PEM file <file>
+.HP
+\fB\-\-untrusted\-pem\fR <file>
+.IP
+load untrusted certificate from PEM file <file>
+.HP
+\fB\-\-trusted\-der\fR <file>
+.IP
+load trusted (root) certificate from DER file <file>
+.HP
+\fB\-\-untrusted\-der\fR <file>
+.IP
+load untrusted certificate from DER file <file>
+.HP
+\fB\-\-verification\-time\fR <time>
+.IP
+the local time in "YYYY\-MM\-DD HH:MM:SS" format
+used certificates verification
+.HP
+\fB\-\-depth\fR <number>
+.IP
+maximum certificates chain depth
+.HP
+\fB\-\-X509\-skip\-strict\-checks\fR
+.IP
+skip strict checking of X509 data
+.HP
+\fB\-\-crypto\fR <name>
+.IP
+the name of the crypto engine to use from the following
+list: openssl, mscrypto, nss, gnutls, gcrypt (if no crypto engine is
+specified then the default one is used)
+.HP
+\fB\-\-crypto\-config\fR <path>
+.IP
+path to crypto engine configuration
+.HP
+\fB\-\-repeat\fR <number>
+.IP
+repeat the operation <number> times
+.HP
+\fB\-\-disable\-error\-msgs\fR
+.IP
+do not print xmlsec error messages
+.HP
+\fB\-\-print\-crypto\-error\-msgs\fR
+.IP
+print errors stack at the end
+.HP
+\fB\-\-help\fR
+.IP
+print help information about the command
+.SH AUTHOR
+Written by Aleksey Sanin <aleksey@aleksey.com>.
+.SH "REPORTING BUGS"
+Report bugs to http://www.aleksey.com/xmlsec/bugs.html
+.SH COPYRIGHT
+Copyright \(co 2002\-2003 Aleksey Sanin.
+.br
+This is free software: see the source for copying information.

data/vendor/xmlsec1-1.2.18/missing

@@ -0,0 +1,376 @@
+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
+# 2008, 2009 Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
+sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case $1 in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  autom4te     touch the output file, or create a stub one
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
+\`g' are ignored when checking the name.
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# normalize program name to check for.
+program=`echo "$1" | sed '
+  s/^gnu-//; t
+  s/^gnu//; t
+  s/^g//; t'`
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).  This is about non-GNU programs, so use $1 not
+# $program.
+case $1 in
+  lex*|yacc*)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar*)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case $program in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case $f in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te*)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison*|yacc*)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f y.tab.h; then
+	echo >y.tab.h
+    fi
+    if test ! -f y.tab.c; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex*|flex*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if test $# -ne 1; then
+        eval LASTARG="\${$#}"
+	case $LASTARG in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if test -f "$SRCFILE"; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if test ! -f lex.yy.c; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit $?
+    fi
+    ;;
+
+  makeinfo*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n "$sed_output"`
+    test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '
+	/^@setfilename/{
+	  s/.* \([^ ]*\) *$/\1/
+	  p
+	  q
+	}' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar*)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case $firstarg in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case $firstarg in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End: