wxruby3 0.9.0.pre.rc.3-x64-mingw-ucrt → 0.9.1-x64-mingw-ucrt

data/lib/wx/doc/gen/app_traits.rb

@@ -0,0 +1,381 @@
+# :stopdoc:
+# This file is automatically generated by the WXRuby3 documentation 
+# generator. Do not alter this file.
+# :startdoc:
+
+
+module Wx
+
+  # The {Wx::AppTraits} class defines various configurable aspects of a {Wx::App}.
+  # You can access it using {Wx::App#get_traits} function and you can create your own {Wx::AppTraits} overriding the {Wx::App#create_traits} function.
+  # Note that {Wx::AppTraits} is an abstract class since it contains many pure virtual functions. In fact, by default, wxWidgets creates a {Wx::ConsoleAppTraits} object for console applications (i.e. those applications linked against {Wx::Base} library only - see the Library List page) and a {Wx::GUIAppTraits} object for GUI applications. Both these classes are derived by {Wx::AppTraits} and represent concrete implementation of the {Wx::AppTraits} interface.
+  # === 
+  # 
+  # Category:  Application and System configuration
+  # @see wxApp Overview
+  # @see  Wx::App 
+  # 
+  # 
+  class AppTraits < ::Object
+  
+    # This method returns the name of the desktop environment currently running in a Unix desktop.
+    # Currently only "KDE" or "GNOME" are supported and the code uses the X11 session protocol vendor name to figure out, which desktop environment is running. The method returns an empty string otherwise and on all other platforms.
+    # @return [String]
+    def get_desktop_environment; end
+    alias_method :desktop_environment, :get_desktop_environment
+    
+    # Returns the {Wx::StandardPaths} object for the application.
+    # It's normally the same for {Wx::Base} and {Wx::GUI} except in the case of wxMac and {Wx::Cocoa}.
+    # The returned reference is to a {Wx::StandardPathsBase} class but you can consider it to be equivalent to {Wx::StandardPaths} (which is documented).
+    # @return [Wx::StandardPaths]
+    def get_standard_paths; end
+    alias_method :standard_paths, :get_standard_paths
+    
+    # Returns the wxWidgets port ID used by the running program and eventually fills the given pointers with the values of the major, minor, and micro digits of the native toolkit currently used.
+    # The version numbers returned are thus detected at run-time and not compile-time (except when this is not possible e.g. {Wx::Motif}).
+    # E.g. if your program is using wxGTK port this function will return {Wx::PortId::PORT_GTK} and put in given pointers the versions of the GTK library in use. See {Wx::PlatformInfo} for more details.
+    # If a micro version is not available it will have a value of 0.
+    # @return [Array(Wx::PortId,Integer,Integer,Integer)]
+    def get_toolkit_version; end
+    alias_method :toolkit_version, :get_toolkit_version
+    
+    # Returns true if the library was built as {Wx::Universal}.
+    # Always returns false for {Wx::Base}-only apps.
+    # @return [Boolean]
+    def is_using_universal_widgets; end
+    alias_method :using_universal_widgets?, :is_using_universal_widgets
+    
+    # Shows the assert dialog with the specified message in GUI mode or just prints the string to stderr in console mode.
+    # Returns true to suppress subsequent asserts, false to continue as before.
+    # @param msg [String] 
+    # @return [Boolean]
+    def show_assert_dialog(msg) end
+    
+    # Shows a message box with the given text and title if possible.
+    # In some ports, e.g. wxMSW, a message box will always be shown, while in the other ones it will be only done if the GUI is available (e.g. X11 display was successfully opened for X11-based ports) and the function simply returns false without doing anything otherwise.
+    # This function is safe in the sense that it can always be called, even before creating {Wx::App}, similarly to {safe_show_message} which is implemented by calling this function and then logging the message to standard error stream if it returned false.
+    # 
+    # true if the message box was shown or false otherwise.
+    # @param text [String]  The text to show to the user.
+    # @param title [String]  The title of the message box shown to the user.
+    # @return [Boolean]
+    def safe_message_box(text, title) end
+    
+    # Helper function mostly useful for derived classes {Wx::AppTraits#show_assert_dialog} implementation.
+    # Returns the stack frame as a plain (and possibly empty) {Wx::String}.
+    # This function is only available when {Wx::Setup::USE_STACKWALKER} is 1.
+    # @return [String]
+    def get_assert_stack_trace; end
+    alias_method :assert_stack_trace, :get_assert_stack_trace
+    
+  end # AppTraits
+  
+  # {Wx::StandardPaths} returns the standard locations in the file system and should be used by applications to find their data files in a portable way.
+  # Note that you must not create objects of class {Wx::StandardPaths} directly, but use the global standard paths object returned by {Wx::StandardPaths.get} (which can be of a type derived from {Wx::StandardPaths} and not of exactly this type) and call the methods you need on it. The object returned by {Wx::StandardPaths.get} may be customized by overriding {Wx::AppTraits#get_standard_paths} methods.
+  # In the description of the methods below, the example return values are given for the Unix, Windows and macOS systems, however please note that these are just the examples and the actual values may differ. For example, under Windows: the system administrator may change the standard directories locations, e.g. the Windows directory may be named <code>"W:\Win2003"</code> instead of the default <code>"C:\Windows"</code>.
+  # Notice that in the examples below the string appinfo may be either just the application name (as returned by {Wx::App#get_app_name}) or a combination of the vendor name ({Wx::App#get_vendor_name}) and the application name, with a path separator between them. By default, only the application name is used, use {Wx::StandardPaths#use_app_info} to change this.
+  # The other placeholders should be self-explanatory: the string username should be replaced with the value the name of the currently logged in user. and prefix is only used under Unix and is <code>/usr/local</code> by default but may be changed using {Wx::StandardPaths#set_install_prefix}.
+  # The directories returned by the methods of this class may or may not exist. If they don't exist, it's up to the caller to create them, {Wx::StandardPaths} doesn't do it.
+  # Finally note that these functions only work with standardly packaged applications. I.e. under Unix you should follow the standard installation conventions and under Mac you should create your application bundle according to the Apple guidelines. Again, this class doesn't help you to do it.
+  # This class is MT-safe: its methods may be called concurrently from different threads without additional locking.
+  # === 
+  # 
+  # Category:  File Handling
+  # @see Wx::FileConfig 
+  # 
+  # 
+  class StandardPaths < ::Object
+  
+    # Possible values for category parameter of {Wx::StandardPaths#get_localized_resources_dir}.
+    # 
+    # 
+    # 
+    class ResourceCat < Wx::Enum
+    
+      # No special category, this is the default.
+      # 
+      ResourceCat_None = Wx::StandardPaths::ResourceCat.new(0)
+      
+      # Message catalog resources category.
+      # 
+      ResourceCat_Messages = Wx::StandardPaths::ResourceCat.new(1)
+      
+    end # ResourceCat
+    
+    # Possible values for userDir parameter of {Wx::StandardPaths#get_user_dir}.
+    # 
+    # 
+    # 
+    class Dir < Wx::Enum
+    
+      # Directory for caching files.
+      # 
+      Dir_Cache = Wx::StandardPaths::Dir.new(0)
+      
+      # Directory containing user documents.
+      # 
+      Dir_Documents = Wx::StandardPaths::Dir.new(1)
+      
+      # Directory containing files on the users desktop.
+      # 
+      Dir_Desktop = Wx::StandardPaths::Dir.new(2)
+      
+      # Directory for downloaded files.
+      # 
+      Dir_Downloads = Wx::StandardPaths::Dir.new(3)
+      
+      # Directory containing music files.
+      # 
+      Dir_Music = Wx::StandardPaths::Dir.new(4)
+      
+      # Directory containing picture files.
+      # 
+      Dir_Pictures = Wx::StandardPaths::Dir.new(5)
+      
+      # Directory containing video files.
+      # 
+      Dir_Videos = Wx::StandardPaths::Dir.new(6)
+      
+    end # Dir
+    
+    # Possible values for {Wx::StandardPaths#set_file_layout} argument.
+    # 
+    # The elements of this enum correspond to the different file layout standards under Unix systems.
+    # 
+    class FileLayout < Wx::Enum
+    
+      # Use the classic file layout.
+      # 
+      FileLayout_Classic = Wx::StandardPaths::FileLayout.new(0)
+      
+      # Use a XDG styled file layout.
+      # 
+      FileLayout_XDG = Wx::StandardPaths::FileLayout.new(1)
+      
+    end # FileLayout
+    
+    # Possible values for {Wx::StandardPaths#make_config_file_name} naming convention argument.
+    # 
+    # The values in this enum are only used under Unix and only when using the classic Unix convention for file layout, in XDG mode, XDG naming convention is used unconditionally.
+    # 
+    class ConfigFileConv < Wx::Enum
+    
+      # Use the class Unix dot-file convention.
+      # 
+      ConfigFileConv_Dot = Wx::StandardPaths::ConfigFileConv.new(0)
+      
+      # Use <code></code>.conf extension for the file names.
+      # 
+      ConfigFileConv_Ext = Wx::StandardPaths::ConfigFileConv.new(1)
+      
+    end # ConfigFileConv
+    
+    # MSW-specific function undoing the effect of {Wx::StandardPaths#ignore_app_sub_dir} calls.
+    # After a call to this function the program directory will be exactly the directory containing the main application binary, i.e. it undoes the effect of any previous {Wx::StandardPaths#ignore_app_sub_dir} calls including the ones done indirectly by {Wx::StandardPaths#ignore_app_build_sub_dirs} called from the class constructor.
+    # @return [void]
+    def dont_ignore_app_sub_dir; end
+    
+    # Return the directory for the document files used by this application.
+    # If the application-specific directory doesn't exist, this function returns {Wx::StandardPaths#get_documents_dir}.
+    # Example return values:
+    # 
+    # - Unix: <code>~/appinfo</code> 
+    # - Windows: <code>"C:\Users\username\Documents\appinfo"</code> or <code>"C:\Documents and Settings\username\My Documents\appinfo"</code> 
+    # - Mac: <code>~/Documents/appinfo</code>
+    # @return [String]
+    def get_app_documents_dir; end
+    alias_method :app_documents_dir, :get_app_documents_dir
+    
+    # Return the directory containing the system config files.
+    # Example return values:
+    # 
+    # - Unix: <code>/etc</code> 
+    # - Windows: <code>"C:\ProgramData\appinfo"</code> or <code>"C:\Documents and Settings\All Users\Application Data\appinfo"</code> 
+    # - Mac: <code>/Library/Preferences</code> 
+    # 
+    # Under Windows this includes appinfo which makes it inconsistent with other ports.
+    # @see Wx::FileConfig 
+    # @return [String]
+    def get_config_dir; end
+    alias_method :config_dir, :get_config_dir
+    
+    # Return the location of the applications global, i.e. not user-specific, data files.
+    # Example return values:
+    # 
+    # - Unix: <code>prefix/share/appinfo</code> 
+    # - Windows: the directory where the executable file is located
+    # - Mac: <code>appinfo.app/Contents/SharedSupport</code> bundle subdirectory
+    # 
+    # Under Unix (only) it is possible to override the default value returned from this function by setting the value of WX_APPNAME_DATA_DIR environment variable to the directory to use (where APPNAME is the upper-cased value of {Wx::App#get_app_name}). This is useful in order to be able to run applications using this function without installing them as you can simply set this environment variable to the source directory location to allow the application to find its files there.
+    # @see Wx::StandardPaths#get_local_data_dir 
+    # @return [String]
+    def get_data_dir; end
+    alias_method :data_dir, :get_data_dir
+    
+    # Same as calling {Wx::StandardPaths#get_user_dir} with Dir_Documents parameter.
+    # 
+    # @see Wx::StandardPaths#get_app_documents_dir
+    # @see  Wx::StandardPaths#get_user_dir 
+    # @return [String]
+    def get_documents_dir; end
+    alias_method :documents_dir, :get_documents_dir
+    
+    # Return the directory and the filename for the current executable.
+    # Example return values:
+    # 
+    # - Unix: <code>/usr/local/bin/exename</code> 
+    # - Windows: <code>"C:\Programs\AppFolder\exename.exe"</code> 
+    # - Mac: <code>/Applications/exename</code>.app/Contents/MacOS/exename
+    # @return [String]
+    def get_executable_path; end
+    alias_method :executable_path, :get_executable_path
+    
+    # Return the location for application data files which are host-specific and can't, or shouldn't, be shared with the other machines.
+    # This is the same as {Wx::StandardPaths#get_data_dir} except under Unix where it returns <code>/etc/appinfo</code>.
+    # @return [String]
+    def get_local_data_dir; end
+    alias_method :local_data_dir, :get_local_data_dir
+    
+    # Return the localized resources directory containing the resource files of the specified category for the given language.
+    # In general this is just the same as lang subdirectory of {Wx::StandardPaths#get_resources_dir} (or lang.lproj under macOS) but is something quite different for message catalog category under Unix where it returns the standard <code>prefix/share/locale/lang/LC_MESSAGES</code> directory.
+    # @param lang [String] 
+    # @param category [Wx::wxStandardPaths::ResourceCat] 
+    # @return [String]
+    def get_localized_resources_dir(lang, category=Wx::StandardPaths::ResourceCat::ResourceCat_None) end
+    alias_method :localized_resources_dir, :get_localized_resources_dir
+    
+    # Return the directory where the loadable modules (plugins) live.
+    # Example return values:
+    # 
+    # - Unix: <code>prefix/lib/appinfo</code> 
+    # - Windows: the directory of the executable file
+    # - Mac: <code>appinfo.app/Contents/PlugIns</code> bundle subdirectory
+    # @see Wx::DynamicLibrary 
+    # @return [String]
+    def get_plugins_dir; end
+    alias_method :plugins_dir, :get_plugins_dir
+    
+    # Return the directory where the application resource files are located.
+    # The resources are the auxiliary data files needed for the application to run and include, for example, image and sound files it might use.
+    # This function is the same as {Wx::StandardPaths#get_data_dir} for all platforms except macOS. Example return values:
+    # 
+    # - Unix: <code>prefix/share/appinfo</code> 
+    # - Windows: the directory where the executable file is located
+    # - Mac: <code>appinfo.app/Contents/Resources</code> bundle subdirectory
+    # @see Wx::StandardPaths#get_localized_resources_dir 
+    # @return [String]
+    def get_resources_dir; end
+    alias_method :resources_dir, :get_resources_dir
+    
+    # Return the directory for storing temporary files, for the current user.
+    # Same as Wx::FileName#get_temp_dir. To create unique temporary files, it is best to use Wx::FileName#create_temp_file_name for correct behaviour when multiple processes are attempting to create temporary files.
+    # @return [String]
+    def get_temp_dir; end
+    alias_method :temp_dir, :get_temp_dir
+    
+    # Return the directory for the user config files.
+    # This directory is:
+    # 
+    # - Unix: <code>~</code> (the home directory) or XDG_CONFIG_HOME depending on {Wx::StandardPaths#get_file_layout} return value
+    # - Windows: <code>"C:\Users\username\AppData\Roaming"</code> or <code>"C:\Documents and Settings\username\Application Data"</code> 
+    # - Mac: <code>~/Library/Preferences</code> 
+    # 
+    # Only use this method if you have a single configuration file to put in this directory, otherwise {Wx::StandardPaths#get_user_data_dir} is more appropriate as the latter adds appinfo to the path, unlike this function.
+    # @return [String]
+    def get_user_config_dir; end
+    alias_method :user_config_dir, :get_user_config_dir
+    
+    # Return the directory for the user-dependent application data files:
+    # - Unix: <code>~/</code>.appinfo
+    # - Windows: <code>"C:\Users\username\AppData\Roaming\appinfo"</code> or <code>"C:\Documents and Settings\username\Application Data\appinfo"</code> 
+    # - Mac: <code>"~/Library/Application Support/appinfo"</code>
+    # @return [String]
+    def get_user_data_dir; end
+    alias_method :user_data_dir, :get_user_data_dir
+    
+    # Return the path of the specified user data directory.
+    # If the value could not be determined the users home directory is returned.
+    # On Unix this (newer) method always respects the XDG base directory specification, even if {Wx::StandardPaths#set_file_layout} with FileLayout_XDG hadn't been called.
+    # @param userDir [Wx::wxStandardPaths::Dir] 
+    # @return [String]
+    def get_user_dir(userDir) end
+    alias_method :user_dir, :get_user_dir
+    
+    # Return the directory for user data files which shouldn't be shared with the other machines.
+    # This is the same as {Wx::StandardPaths#get_user_data_dir} for all platforms except Windows where it returns <code>"C:\Users\username\AppData\Local\appinfo"</code> or <code>"C:\Documents and Settings\username\Local Settings\Application Data\appinfo"</code>
+    # @return [String]
+    def get_user_local_data_dir; end
+    alias_method :user_local_data_dir, :get_user_local_data_dir
+    
+    # MSW-specific function to customize application directory detection.
+    # This class supposes that data, plugins &c files are located under the program directory which is the directory containing the application binary itself. But sometimes this binary may be in a subdirectory of the main program directory, e.g. this happens in at least the following common cases:
+    # 
+    # - The program is in "bin" subdirectory of the installation directory.
+    # - The program is in "debug" subdirectory of the directory containing sources and data files during development
+    # 
+    # By calling this function you instruct the class to remove the last component of the path if it matches its argument. Notice that it may be called more than once, e.g. you can call both IgnoreAppSubDir("bin") and IgnoreAppSubDir("debug") to take care of both production and development cases above but that each call will only remove the last path component. Finally note that the argument can contain wild cards so you can also call IgnoreAppSubDir("vc*msw*") to ignore all build directories at once when using wxWidgets-inspired output directories names.
+    # @see Wx::StandardPaths#ignore_app_build_sub_dirs
+    # @param subdirPattern [String]  The subdirectory containing the application binary which should be ignored when determining the top application directory. The pattern is case-insensitive and may contain wild card characters <code>'</code>?' and <code>'*'</code>.
+    # @return [void]
+    def ignore_app_sub_dir(subdirPattern) end
+    
+    # MSW-specific function to ignore all common build directories.
+    # This function calls {Wx::StandardPaths#ignore_app_sub_dir} with all common values for build directory, e.g. <code>"debug"</code> and <code>"release"</code>.
+    # It is called by the class constructor and so the build directories are always ignored by default. You may use {Wx::StandardPaths#dont_ignore_app_sub_dir} to avoid ignoring them if this is inappropriate for your application.
+    # @return [void]
+    def ignore_app_build_sub_dirs; end
+    
+    # Controls what application information is used when constructing paths that should be unique to this program, such as the application data directory, the plugins directory on Unix, etc.
+    # Valid values for info are:
+    # 
+    # - AppInfo_None: use neither application nor vendor name in the paths.
+    # - AppInfo_AppName: use the application name in the paths.
+    # - AppInfo_VendorName: use the vendor name in the paths, usually used combined with AppInfo_AppName, i.e. as <code>AppInfo_AppName | AppInfo_VendorName</code>.
+    # 
+    # By default, only the application name is used.
+    # @param info [Integer] 
+    # @return [void]
+    def use_app_info(info) end
+    
+    # Sets the current file layout.
+    # The default layout is FileLayout_Classic for compatibility, however newer applications are encouraged to set it to FileLayout_XDG on program startup.
+    # @param layout [Wx::wxStandardPaths::FileLayout] 
+    # @return [void]
+    def set_file_layout(layout) end
+    alias_method :file_layout=, :set_file_layout
+    
+    # Returns the current file layout.
+    # 
+    # @see Wx::StandardPaths#set_file_layout
+    # @return [Wx::wxStandardPaths::FileLayout]
+    def get_file_layout; end
+    alias_method :file_layout, :get_file_layout
+    
+    # Return the file name which would be used by {Wx::FileConfig} if it were constructed with basename.
+    # conv is used to construct the name of the file under Unix and only matters when using the class file layout, i.e. if {Wx::StandardPaths#set_file_layout} had not been called with FileLayout_XDG argument. In this case, this argument is used to determine whether to use an extension or a leading dot. When following XDG specification, the function always appends the extension, regardless of conv value. Finally, this argument is not used at all under non-Unix platforms.
+    # @param basename [String] 
+    # @param conv [Wx::wxStandardPaths::ConfigFileConv] 
+    # @return [String]
+    def make_config_file_name(basename, conv=Wx::StandardPaths::ConfigFileConv::ConfigFileConv_Ext) end
+    
+    # Returns reference to the unique global standard paths object.
+    # @return [Wx::StandardPaths]
+    def self.get; end
+    
+    # Returns location of Windows shell special folder.
+    # This function is, by definition, MSW-specific. It can be used to access pre-defined shell directories not covered by the existing methods of this class, e.g.: 
+    # ```
+    #   #ifdef __WXMSW__
+    #       // get the location of files waiting to be burned on a CD
+    #       wxString cdburnArea =
+    #           wxStandardPaths::MSWGetShellDir(CSIDL_CDBURN_AREA);
+    #   #endif // __WXMSW__
+    # ```
+    # @param csidl [Integer]  
+    # @return [String]
+    def self.msw_get_shell_dir(csidl) end
+    
+  end # StandardPaths
+  
+
+end

data/lib/wx/doc/gen/art_provider.rb

@@ -341,7 +341,7 @@ module Wx
   # 
   # - {Wx::ART_NEW_DIR} 
   # 
-  # - {Wx::ART_FOLDER} 
+  # - {Wx::ArtLocator::ART_FOLDER} 
   # 
   # - {Wx::ART_FOLDER_OPEN} 
   # 
@@ -442,7 +442,7 @@ module Wx
   
     # Delete the given provider.
     # @param provider [Wx::ArtProvider] 
-    # @return [true,false]
+    # @return [Boolean]
     def self.delete(provider) end
     
     # Query registered providers for bitmap with given ID.
@@ -509,11 +509,11 @@ module Wx
     # Returns true if the platform uses native icons provider that should take precedence over any customizations.
     # This is true for any platform that has user-customizable icon themes, currently only wxGTK.
     # A typical use for this method is to decide whether a custom art provider should be plugged in using {Wx::ArtProvider.push} or {Wx::ArtProvider.push_back}.
-    # @return [true,false]
+    # @return [Boolean]
     def self.has_native_provider; end
     
     # Remove latest added provider and delete it.
-    # @return [true,false]
+    # @return [Boolean]
     def self.pop; end
     
     # Register new art provider and add it to the top of providers stack (i.e.

data/lib/wx/doc/gen/aui/aui_manager.rb

@@ -101,17 +101,17 @@ module Wx::AUI
     #   There are several versions of this function. The first version allows the full spectrum of pane parameter possibilities. The second version is used for simpler user interfaces which do not require as much configuration. The last version allows a drop position to be specified, which will determine where the pane will be added.
     #   @param window [Wx::Window] 
     #   @param pane_info [Wx::AUI::AuiPaneInfo] 
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload add_pane(window, direction=Wx::Direction::LEFT, caption=(''))
     #   @param window [Wx::Window] 
     #   @param direction [Integer] 
     #   @param caption [String] 
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload add_pane(window, pane_info, drop_pos)
     #   @param window [Wx::Window] 
     #   @param pane_info [Wx::AUI::AuiPaneInfo] 
     #   @param drop_pos [Array(Integer, Integer), Wx::Point] 
-    #   @return [true,false]
+    #   @return [Boolean]
     def add_pane(*args) end
     
     # This function is used by controls to calculate the drop hint rectangle.
@@ -126,7 +126,7 @@ module Wx::AUI
     
     # Check if a key modifier is pressed (actually {Wx::KeyCode::K_CONTROL} or {Wx::KeyCode::K_ALT}) while dragging the frame to not dock the window.
     # @param p [Wx::AUI::AuiPaneInfo] 
-    # @return [true,false]
+    # @return [Boolean]
     def can_dock_panel(p) end
     alias_method :can_dock_panel?, :can_dock_panel
     
@@ -146,7 +146,7 @@ module Wx::AUI
     # Tells the {Wx::AUI::AuiManager} to stop managing the pane specified by window.
     # The window, if in a floated frame, is reparented to the frame managed by {Wx::AUI::AuiManager}.
     # @param window [Wx::Window] 
-    # @return [true,false]
+    # @return [Boolean]
     def detach_pane(window) end
     
     # This function is used by controls to draw the hint window.
@@ -166,10 +166,8 @@ module Wx::AUI
     
     # Returns the current dock constraint values.
     # See {Wx::AUI::AuiManager#set_dock_size_constraint} for more information.
-    # @param widthpct [double] 
-    # @param heightpct [double] 
-    # @return [void]
-    def get_dock_size_constraint(widthpct, heightpct) end
+    # @return [Array(Float,Float)]
+    def get_dock_size_constraint; end
     alias_method :dock_size_constraint, :get_dock_size_constraint
     
     # Returns the current {Wx::AUI::AuiManagerOption}'s flags.
@@ -196,7 +194,7 @@ module Wx::AUI
     # Returns true if windows are resized live.
     # This function combines the check for {Wx::AUI::AuiManager.always_uses_live_resize} and, for the platforms where live resizing is optional, the check for {Wx::AUI::AuiManagerOption::AUI_MGR_LIVE_RESIZE} flag.
     # Using this accessor allows to verify whether live resizing is being actually used.
-    # @return [true,false]
+    # @return [Boolean]
     def has_live_resize; end
     alias_method :has_live_resize?, :has_live_resize
     
@@ -210,7 +208,7 @@ module Wx::AUI
     # @param window [Wx::Window] 
     # @param insert_location [Wx::AUI::AuiPaneInfo] 
     # @param insert_level [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def insert_pane(window, insert_location, insert_level=Wx::AUI_INSERT_PANE) end
     
     # {Wx::AUI::AuiManager#load_pane_info} is similar to LoadPerspective, with the exception that it only loads information about a single pane.
@@ -235,8 +233,8 @@ module Wx::AUI
     # 
     # @see Wx::AUI::AuiManager#save_perspective 
     # @param perspective [String]  Serialized layout information of a perspective (excl. pointers to UI elements).
-    # @param update [true,false]  If update is true, {Wx::AUI::AuiManager#update} is automatically invoked, thus realizing the specified perspective on screen.
-    # @return [true,false]
+    # @param update [Boolean]  If update is true, {Wx::AUI::AuiManager#update} is automatically invoked, thus realizing the specified perspective on screen.
+    # @return [Boolean]
     def load_perspective(perspective, update=true) end
     
     # Maximize the given pane.
@@ -329,7 +327,7 @@ module Wx::AUI
     # Returns true if live resize is always used on the current platform.
     # If this function returns true, {Wx::AUI::AuiManagerOption::AUI_MGR_LIVE_RESIZE} flag is ignored and live resize is always used, whether it's specified or not.
     # Currently this is the case for wxOSX and wxGTK3 ports, as live resizing is the only implemented method there.
-    # @return [true,false]
+    # @return [Boolean]
     def self.always_uses_live_resize; end
     
     # Calling this method will return the {Wx::AUI::AuiManager} for a given window.

data/lib/wx/doc/gen/aui/aui_manager_event.rb

@@ -35,14 +35,14 @@ module Wx::AUI
   class AuiManagerEvent < Event
   
     # Constructor.
-    # @param type [Wx::AUI::AuiMDIChildFrame::EventType] 
+    # @param type [Wx::CommandLinkButton::EventType] 
     # @return [Wx::AUI::AuiManagerEvent]
     def initialize(type=Wx::EVT_NULL) end
     
     # 
     # true if this event can be vetoed.
     # @see Wx::AUI::AuiManagerEvent#veto 
-    # @return [true,false]
+    # @return [Boolean]
     def can_veto; end
     alias_method :can_veto?, :can_veto
     
@@ -61,7 +61,7 @@ module Wx::AUI
     # 
     # true if this event was vetoed.
     # @see Wx::AUI::AuiManagerEvent#veto 
-    # @return [true,false]
+    # @return [Boolean]
     def get_veto; end
     
     # 
@@ -83,7 +83,7 @@ module Wx::AUI
     alias_method :button=, :set_button
     
     # Sets whether or not this event can be vetoed.
-    # @param can_veto [true,false] 
+    # @param can_veto [Boolean] 
     # @return [void]
     def set_can_veto(can_veto) end
     alias_method :can_veto=, :set_can_veto
@@ -108,7 +108,7 @@ module Wx::AUI
     alias_method :pane=, :set_pane
     
     # Cancels the action indicated by this event if {Wx::AUI::AuiManagerEvent#can_veto} is true.
-    # @param veto [true,false] 
+    # @param veto [Boolean] 
     # @return [void]
     def veto(veto=true) end
     

data/lib/wx/doc/gen/aui/aui_mdi_child_frame.rb

@@ -13,7 +13,7 @@ module Wx::AUI
   
     # @overload initialize()
     #   @return [Wx::AUI::AuiMDIChildFrame]
-    # @overload initialize(parent, winid, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FrameNameStr)
+    # @overload initialize(parent, winid, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FRAME_NAME_STR)
     #   @param parent [Wx::AUI::AuiMDIParentFrame] 
     #   @param winid [Integer] 
     #   @param title [String] 
@@ -31,8 +31,8 @@ module Wx::AUI
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
-    def create(parent, winid, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FrameNameStr) end
+    # @return [Boolean]
+    def create(parent, winid, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FRAME_NAME_STR) end
     
     # @param menuBar [Wx::MenuBar] 
     # @return [void]
@@ -72,7 +72,7 @@ module Wx::AUI
     # Destroys the window safely.
     # Use this function instead of the delete operator, since different window classes can be destroyed differently. Frames and dialogs are not destroyed immediately when this function is called  they are added to a list of windows to be deleted on idle time, when all the window's events have been processed. This prevents problems with events being sent to non-existent windows.
     # true if the window has either been successfully deleted, or it has been added to the list of windows pending real deletion.
-    # @return [true,false]
+    # @return [Boolean]
     def destroy; end
     
     # Shows or hides the window.
@@ -84,8 +84,8 @@ module Wx::AUI
     # @see  Wx::AUI::AuiMDIChildFrame#hide
     # @see  Wx::RadioBox#show
     # @see  Wx::ShowEvent. 
-    # @param show [true,false]  If true displays the window. Otherwise, hides it.
-    # @return [true,false]
+    # @param show [Boolean]  If true displays the window. Otherwise, hides it.
+    # @return [Boolean]
     def show(show=true) end
     
     # @param number [Integer] 
@@ -105,10 +105,9 @@ module Wx::AUI
     def set_status_text(text, number=0) end
     alias_method :status_text=, :set_status_text
     
-    # @param n [Integer] 
-    # @param widths_field [int] 
+    # @param widths_field [Array<Integer>] 
     # @return [void]
-    def set_status_widths(n, widths_field) end
+    def set_status_widths(widths_field) end
     
     # @param style [Integer] 
     # @param winid [Integer] 
@@ -120,31 +119,31 @@ module Wx::AUI
     def get_tool_bar; end
     alias_method :tool_bar, :get_tool_bar
     
-    # @param maximize [true,false] 
+    # @param maximize [Boolean] 
     # @return [void]
     def maximize(maximize=true) end
     
     # @return [void]
     def restore; end
     
-    # @param iconize [true,false] 
+    # @param iconize [Boolean] 
     # @return [void]
     def iconize(iconize=true) end
     
-    # @return [true,false]
+    # @return [Boolean]
     def is_maximized; end
     alias_method :maximized?, :is_maximized
     
-    # @return [true,false]
+    # @return [Boolean]
     def is_iconized; end
     alias_method :iconized?, :is_iconized
     
-    # @param show [true,false] 
+    # @param show [Boolean] 
     # @param style [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def show_full_screen(show, style) end
     
-    # @return [true,false]
+    # @return [Boolean]
     def is_full_screen; end
     alias_method :full_screen?, :is_full_screen
     

data/lib/wx/doc/gen/aui/aui_mdi_client_window.rb

@@ -21,7 +21,7 @@ module Wx::AUI
     
     # @param parent [Wx::AUI::AuiMDIParentFrame] 
     # @param style [Integer] 
-    # @return [true,false]
+    # @return [Boolean]
     def create_client(parent, style=(Wx::VSCROLL|Wx::HSCROLL)) end
     
     # Sets the page selection.