wxruby3 0.9.0.pre.rc.3-x64-mingw-ucrt → 0.9.1-x64-mingw-ucrt

data/lib/wx/doc/gen/log.rb

@@ -95,7 +95,7 @@ module Wx
     # Returns true if the mask is one of allowed masks for {log_trace}.
     # See also: {Wx::Log.add_trace_mask}, {Wx::Log.remove_trace_mask}
     # @param mask [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def self.is_allowed_trace_mask(mask) end
     
     # Remove the mask from the list of allowed masks for {log_trace}.
@@ -112,7 +112,7 @@ module Wx
     def self.dont_create_on_demand; end
     
     # Returns the pointer to the active log target (may be NULL).
-    # Notice that if {Wx::Log.set_active_target} hadn't been previously explicitly called, this function will by default try to create a log target by calling Wx::AppTraits#create_log_target which may be overridden in a user-defined traits class to change the default behaviour. You may also call {Wx::Log.dont_create_on_demand} to disable this behaviour.
+    # Notice that if {Wx::Log.set_active_target} hadn't been previously explicitly called, this function will by default try to create a log target by calling {Wx::AppTraits#create_log_target} which may be overridden in a user-defined traits class to change the default behaviour. You may also call {Wx::Log.dont_create_on_demand} to disable this behaviour.
     # When this function is called from threads other than main one, auto-creation doesn't happen. But if the thread has a thread-specific log target previously set by {Wx::Log.set_thread_active_target}, it is returned instead of the global one. Otherwise, the global log target is returned.
     # @return [Wx::Log]
     def self.get_active_target; end
@@ -157,7 +157,7 @@ module Wx
     # @see  Wx::Log.set_component_level
     # @param level [Wx::LogLevel] 
     # @param component [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def self.is_level_enabled(level, component) end
     
     # Sets the log level for the given component.
@@ -185,23 +185,23 @@ module Wx
     # The old state, i.e. true if logging was previously enabled and false if it was disabled.
     # @see Wx::LogNull
     # @see  Wx::Log.is_enabled
-    # @param enable [true,false] 
-    # @return [true,false]
+    # @param enable [Boolean] 
+    # @return [Boolean]
     def self.enable_logging(enable=true) end
     
     # Returns true if logging is enabled at all now.
     # 
     # @see Wx::Log.is_level_enabled
     # @see  Wx::Log.enable_logging 
-    # @return [true,false]
+    # @return [Boolean]
     def self.is_enabled; end
     
     # Returns whether the repetition counting mode is enabled.
-    # @return [true,false]
+    # @return [Boolean]
     def self.get_repetition_counting; end
     
     # Enables logging mode in which a log message is logged once, and in case exactly the same message successively repeats one or more times, only the number of repetitions is logged.
-    # @param repetCounting [true,false] 
+    # @param repetCounting [Boolean] 
     # @return [void]
     def self.set_repetition_counting(repetCounting=true) end
     
@@ -223,23 +223,16 @@ module Wx
     def self.disable_timestamp; end
     
     # Returns whether the verbose mode is currently active.
-    # @return [true,false]
+    # @return [Boolean]
     def self.get_verbose; end
     
     # Activates or deactivates verbose mode in which the verbose messages are logged as the normal ones instead of being silently dropped.
     # The verbose messages are the trace messages which are not disabled in the release mode and are generated by {log_verbose}.
     # @see Logging Overview 
-    # @param verbose [true,false] 
+    # @param verbose [Boolean] 
     # @return [void]
     def self.set_verbose(verbose=true) end
     
-    # Sets the specified formatter as the active one.
-    # Returns the pointer to the previous formatter. You must delete it if you don't plan to attach it again to a {Wx::Log} object later.
-    # @param formatter [Wx::LogFormatter]  The new formatter. If NULL, reset to the default formatter.
-    # @return [Wx::LogFormatter]
-    def set_formatter(formatter) end
-    alias_method :formatter=, :set_formatter
-    
     # Show all pending output and clear the buffer.
     # Some of {Wx::Log} implementations, most notably the standard {Wx::LogGui} class, buffer the messages (for example, to avoid showing the user a zillion of modal message boxes one after another  which would be really annoying). This function shows them all and clears the buffer contents. If the buffer is already empty, nothing happens.
     # If you override this method in a derived class, call the base class version first, before doing anything else.
@@ -349,18 +342,18 @@ module Wx
     alias_method :old_log, :get_old_log
     
     # Returns true if the messages are passed to the previously active log target (default) or false if {Wx::LogChain#pass_messages} had been called.
-    # @return [true,false]
+    # @return [Boolean]
     def is_passing_messages; end
     alias_method :passing_messages?, :is_passing_messages
     
     # By default, the log messages are passed to the previously active log target.
     # Calling this function with false parameter disables this behaviour (presumably temporarily, as you shouldn't use {Wx::LogChain} at all otherwise) and it can be re-enabled by calling it again with passMessages set to true.
-    # @param passMessages [true,false] 
+    # @param passMessages [Boolean] 
     # @return [void]
     def pass_messages(passMessages) end
     
     # Sets another log target to use (may be NULL).
-    # The log target specified in the {Wx::LogChain#log_chain(wxLog)} constructor or in a previous call to this function is deleted. This doesn't change the old log target value (the one the messages are forwarded to) which still remains the same as was active when {Wx::LogChain} object was created.
+    # The log target specified in the {Wx::LogChain#initialize(wxLog)} constructor or in a previous call to this function is deleted. This doesn't change the old log target value (the one the messages are forwarded to) which still remains the same as was active when {Wx::LogChain} object was created.
     # @param logger [Wx::Log] 
     # @return [void]
     def set_log(logger) end
@@ -405,32 +398,6 @@ module Wx
   
   end # LogStderr
   
-  # This class can be used to redirect the log messages to a C++ stream.
-  # Please note that this class is only available if wxWidgets was compiled with the standard iostream library support ({Wx::Setup::USE_STD_IOSTREAM} must be on).
-  # === 
-  # 
-  # Category:  {Wx::Logging}
-  # @see Wx::LogStderr
-  # @see  Wx::StreamToTextRedirector 
-  # 
-  # 
-  # 
-  # @note This class is <b>untracked</b> and should not be derived from nor instances extended!
-  class LogStream < Log
-  
-    # Constructs a log target which sends all the log messages to the given output stream.
-    # If it is NULL, the messages are sent to cerr. The messages will be written in the encoding specified by the given {Wx::MBConv}.
-    # The conv argument is only available in wxWidgets 3.1.1 and later.
-    # In practice, it is only advisable to specify {Wx::ConvUTF8} as the conv. If using <code>mb_conv_utf16</code>, the file should be opened in std::ios::binary mode.
-    # 
-    # If a log message contains any characters that cannot be converted to the character set given by conv, that message will be silently ignored, i.e. it will not be written at all.
-    # @param ostr [std::ostream] 
-    # @param conv [Wx::MBConv] 
-    # @return [Wx::LogStream]
-    def initialize(ostr=nil, conv=Wx::ConvWhateverWorks) end
-    
-  end # LogStream
-  
   # Using these target all the log messages can be redirected to a text control.
   # The text control must have been created with {Wx::TE_MULTILINE} style by the caller previously.
   # === 
@@ -468,21 +435,6 @@ module Wx
     
   end # LogInterposer
   
-  # A special version of {Wx::LogChain} which uses itself as the new log target.
-  # It forwards log messages to the previously installed one in addition to processing them itself. Unlike {Wx::LogInterposer}, it doesn't delete the old target which means it can be used to temporarily redirect log output.
-  # As per {Wx::LogInterposer}, this class must be derived from to implement {Wx::Log::DoLog} and/or {Wx::Log::DoLogString} methods.
-  # === 
-  # 
-  # Category:  {Wx::Logging}
-  # 
-  class LogInterposerTemp < LogChain
-  
-    # The default constructor installs this object as the current active log target.
-    # @return [Wx::LogInterposerTemp]
-    def initialize; end
-    
-  end # LogInterposerTemp
-  
   # This class represents a background log window: to be precise, it collects all log messages in the log frame which it manages but also passes them on to the log target which was active at the moment of its creation.
   # This allows you, for example, to show all the log messages in a frame but still continue to process them normally by showing the standard log dialog.
   # === 
@@ -491,15 +443,13 @@ module Wx
   # @see Wx::LogTextCtrl 
   # 
   # 
-  # 
-  # @note This class is <b>untracked</b> and should not be derived from nor instances extended!
   class LogWindow < LogInterposer
   
     # Creates the log frame window and starts collecting the messages in it.
     # @param pParent [Wx::Window]  The parent window for the log frame, may be NULL
     # @param szTitle [String]  The title for the log frame
-    # @param show [true,false]  true to show the frame initially (default), otherwise {Wx::LogWindow#show} must be called later.
-    # @param passToOld [true,false]  true to process the log messages normally in addition to logging them in the log frame (default), false to only log them in the log frame. Note that if no targets were set using {Wx::Log.set_active_target} then {Wx::LogWindow} simply becomes the active one and messages won't be passed to other targets.
+    # @param show [Boolean]  true to show the frame initially (default), otherwise {Wx::LogWindow#show} must be called later.
+    # @param passToOld [Boolean]  true to process the log messages normally in addition to logging them in the log frame (default), false to only log them in the log frame. Note that if no targets were set using {Wx::Log.set_active_target} then {Wx::LogWindow} simply becomes the active one and messages won't be passed to other targets.
     # @return [Wx::LogWindow]
     def initialize(pParent, szTitle, show=true, passToOld=true) end
     
@@ -513,7 +463,7 @@ module Wx
     # Return true from here to allow the frame to close, false to prevent this from happening.
     # @see Wx::LogWindow#on_frame_delete 
     # @param frame [Wx::Frame] 
-    # @return [true,false]
+    # @return [Boolean]
     def on_frame_close(frame) end
     
     # Called right before the log frame is going to be deleted: will always be called unlike {Wx::LogWindow#on_frame_close}.
@@ -522,7 +472,7 @@ module Wx
     def on_frame_delete(frame) end
     
     # Shows or hides the frame.
-    # @param show [true,false] 
+    # @param show [Boolean] 
     # @return [void]
     def show(show=true) end
     

data/lib/wx/doc/gen/mdi_client_window.rb

@@ -29,7 +29,7 @@ module Wx
     # This function may be overridden in the derived class but the base class version must usually be called first to really create the window.
     # @param parent [Wx::MDIParentFrame]  The window parent.
     # @param style [Integer]  The window style. Only {Wx::HSCROLL} and {Wx::VSCROLL} bits are meaningful here.
-    # @return [true,false]
+    # @return [Boolean]
     def create_client(parent, style=0) end
     
   end # MDIClientWindow

data/lib/wx/doc/gen/mdi_frame.rb

@@ -33,7 +33,7 @@ module Wx
     #   Default constructor.
     #   Use {Wx::MDIParentFrame#create} for the objects created using this constructor.
     #   @return [Wx::MDIParentFrame]
-    # @overload initialize(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=(Wx::DEFAULT_FRAME_STYLE|Wx::VSCROLL|Wx::HSCROLL), name=Wx::FrameNameStr)
+    # @overload initialize(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=(Wx::DEFAULT_FRAME_STYLE|Wx::VSCROLL|Wx::HSCROLL), name=Wx::FRAME_NAME_STR)
     #   Constructor, creating the window.
     #   Notice that if you override virtual {Wx::MDIParentFrame#on_create_client} method you shouldn't be using this constructor but the default constructor and {Wx::MDIParentFrame#create} as otherwise your overridden method is never going to be called because of the usual C++ virtual call resolution rules.
     #   
@@ -77,7 +77,7 @@ module Wx
     def cascade; end
     
     # Used in two-step frame construction.
-    # See {Wx::MDIParentFrame#mdi_parent_frame} for further details.
+    # See {Wx::MDIParentFrame#initialize} for further details.
     # @param parent [Wx::Window] 
     # @param id [Integer] 
     # @param title [String] 
@@ -85,8 +85,8 @@ module Wx
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
-    def create(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=(Wx::DEFAULT_FRAME_STYLE|Wx::VSCROLL|Wx::HSCROLL), name=Wx::FrameNameStr) end
+    # @return [Boolean]
+    def create(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=(Wx::DEFAULT_FRAME_STYLE|Wx::VSCROLL|Wx::HSCROLL), name=Wx::FRAME_NAME_STR) end
     
     # Returns a pointer to the active MDI child, if there is one.
     # If there are any children at all this function returns a non-NULL pointer.
@@ -144,14 +144,14 @@ module Wx
     
     # Tiles the MDI child windows either horizontally or vertically depending on whether orient is {Wx::Orientation::HORIZONTAL} or {Wx::Orientation::VERTICAL}.
     # This method is only implemented in MSW MDI implementation and does nothing under the other platforms.
-    # @param orient [Orientation] 
+    # @param orient [Wx::Orientation] 
     # @return [void]
     def tile(orient=Wx::Orientation::HORIZONTAL) end
     
     # Returns whether the MDI implementation is tab-based.
     # Currently only the MSW port uses the real MDI. In Mac ports the usual SDI is used, as common under this platforms, and all the other ports use TDI implementation.
     # TDI-based MDI applications have different appearance and functionality (e.g. child frames can't be minimized and only one of them is visible at any given time) so the application may need to adapt its interface somewhat depending on the return value of this function.
-    # @return [true,false]
+    # @return [Boolean]
     def self.is_tdi; end
     
   end # MDIParentFrame
@@ -176,7 +176,7 @@ module Wx
     # @overload initialize()
     #   Default constructor.
     #   @return [Wx::MDIChildFrame]
-    # @overload initialize(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FrameNameStr)
+    # @overload initialize(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FRAME_NAME_STR)
     #   Constructor, creating the window.
     #   
     #   @see Wx::MDIChildFrame#create 
@@ -198,7 +198,7 @@ module Wx
     def activate; end
     
     # Used in two-step frame construction.
-    # See {Wx::MDIChildFrame#mdi_child_frame} for further details.
+    # See {Wx::MDIChildFrame#initialize} for further details.
     # @param parent [Wx::MDIParentFrame] 
     # @param id [Integer] 
     # @param title [String] 
@@ -206,8 +206,8 @@ module Wx
     # @param size [Array(Integer, Integer), Wx::Size] 
     # @param style [Integer] 
     # @param name [String] 
-    # @return [true,false]
-    def create(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FrameNameStr) end
+    # @return [Boolean]
+    def create(parent, id, title, pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=Wx::DEFAULT_FRAME_STYLE, name=Wx::FRAME_NAME_STR) end
     
     # Returns the MDI parent frame containing this child.
     # Notice that this may return a different object than {Wx::MDIChildFrame#get_parent} as the child frames may be created as children of the client window internally.
@@ -218,7 +218,7 @@ module Wx
     # Returns true for MDI children in TDI implementations.
     # TDI-based implementations represent MDI children as pages in a {Wx::Notebook} and so they are always maximized and can't be restored or iconized.
     # @see Wx::MDIParentFrame.is_tdi. 
-    # @return [true,false]
+    # @return [Boolean]
     def is_always_maximized; end
     alias_method :always_maximized?, :is_always_maximized
     
@@ -226,7 +226,7 @@ module Wx
     # This function doesn't do anything if {Wx::MDIChildFrame#is_always_maximized} returns true.
     # @see Wx::MDIChildFrame#activate
     # @see  Wx::MDIChildFrame#restore 
-    # @param maximize [true,false] 
+    # @param maximize [Boolean] 
     # @return [void]
     def maximize(maximize=true) end
     

data/lib/wx/doc/gen/media_ctrl.rb

@@ -80,7 +80,7 @@ module Wx
     # @overload initialize()
     #   Default constructor - you MUST call {Wx::MediaCtrl#create} before calling any other methods of {Wx::MediaCtrl}.
     #   @return [Wx::MediaCtrl]
-    # @overload initialize(parent, id, fileName=(''), pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, szBackend=(''), validator=Wx::DEFAULT_VALIDATOR, name=("mediaCtrl"))
+    # @overload initialize(parent, id, fileName=(''), pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, szBackend=(''), validator=Wx::DEFAULT_VALIDATOR, name=("MEDIA_CTRL"))
     #   Constructor that calls {Wx::MediaCtrl#create}.
     #   You may prefer to call {Wx::MediaCtrl#create} directly to check to see if {Wx::MediaCtrl} is available on the system.
     #   @param parent [Wx::Window]  parent of this control. Must not be NULL.
@@ -107,8 +107,8 @@ module Wx
     # @param szBackend [String]  Name of backend you want to use, leave blank to make {Wx::MediaCtrl} figure it out.
     # @param validator [Wx::Validator]  validator to use.
     # @param name [String]  Window name.
-    # @return [true,false]
-    def create(parent, id, fileName=(''), pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, szBackend=(''), validator=Wx::DEFAULT_VALIDATOR, name=("mediaCtrl")) end
+    # @return [Boolean]
+    def create(parent, id, fileName=(''), pos=Wx::DEFAULT_POSITION, size=Wx::DEFAULT_SIZE, style=0, szBackend=(''), validator=Wx::DEFAULT_VALIDATOR, name=("MEDIA_CTRL")) end
     
     # Obtains the best size relative to the original/natural size of the video, if there is any.
     # See Video size for more information.
@@ -132,7 +132,7 @@ module Wx
     # 
     # {Wx::MediaState::MEDIASTATE_PLAYING} 
     # The media is currently playing.
-    # @return [MediaState]
+    # @return [Wx::MediaState]
     def get_state; end
     alias_method :state, :get_state
     
@@ -150,39 +150,39 @@ module Wx
     #   Loads the file that fileName refers to.
     #   Returns false if loading fails.
     #   @param fileName [String] 
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload load(uri)
     #   Loads the location that uri refers to.
     #   Note that this is very implementation-dependent, although HTTP URI/URLs are generally supported, for example. Returns false if loading fails.
     #   @param uri [Wx::URI] 
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload load(uri, proxy)
     #   Loads the location that uri refers to with the proxy proxy.
     #   Not implemented on most backends so it should be called with caution. Returns false if loading fails.
     #   @param uri [Wx::URI] 
     #   @param proxy [Wx::URI] 
-    #   @return [true,false]
+    #   @return [Boolean]
     def load(*args) end
     
     # Same as Load(const wxURI& uri).
     # Kept for {Wx::Python} compatibility.
     # @param uri [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def load_uri(uri) end
     
     # Same as Load(const wxURI& uri, const wxURI& proxy).
     # Kept for {Wx::Python} compatibility.
     # @param uri [String] 
     # @param proxy [String] 
-    # @return [true,false]
+    # @return [Boolean]
     def load_uri_with_proxy(uri, proxy) end
     
     # Pauses playback of the media.
-    # @return [true,false]
+    # @return [Boolean]
     def pause; end
     
     # Resumes playback of the media.
-    # @return [true,false]
+    # @return [Boolean]
     def play; end
     
     # Seeks to a position within the media.
@@ -190,12 +190,12 @@ module Wx
     # @param where [Wx::FileOffset] 
     # @param mode [Wx::SeekMode] 
     # @return [Wx::FileOffset]
-    def seek(where, mode=Wx::FromStart) end
+    def seek(where, mode=Wx::SeekMode::FromStart) end
     
     # Sets the playback rate, or speed of the media, to that referred by dRate.
     # 1.0 represents normal speed, while 2.0 represents twice the normal speed of the media, for example. Not supported on the GStreamer (Unix) backend. Returns true if successful.
     # @param dRate [Float] 
-    # @return [true,false]
+    # @return [Boolean]
     def set_playback_rate(dRate) end
     alias_method :playback_rate=, :set_playback_rate
     
@@ -203,7 +203,7 @@ module Wx
     # 1.0 represents full volume, while 0.5 represents half (50 percent) volume, for example.
     # The volume may not be exact due to conversion and rounding errors, although setting the volume to full or none is always exact. Returns true if successful.
     # @param dVolume [Float] 
-    # @return [true,false]
+    # @return [Boolean]
     def set_volume(dVolume) end
     alias_method :volume=, :set_volume
     
@@ -211,13 +211,13 @@ module Wx
     # Applications using native toolkits such as QuickTime usually have a scrollbar, play button, and more provided to them by the toolkit. By default {Wx::MediaCtrl} does not do this. However, on the DirectShow and QuickTime backends you can show or hide the native controls provided by the underlying toolkit at will using {Wx::MediaCtrl#show_player_controls}. Simply calling the function with default parameters tells {Wx::MediaCtrl} to use the default controls provided by the toolkit. The function takes a {Wx::MediaCtrlPlayerControls} enumeration, please see available show modes there.
     # For more info see Player controls.
     # Currently only implemented on the QuickTime and DirectShow backends. The function returns true on success.
-    # @param flags [MediaCtrlPlayerControls] 
-    # @return [true,false]
+    # @param flags [Wx::MediaCtrlPlayerControls] 
+    # @return [Boolean]
     def show_player_controls(flags=Wx::MediaCtrlPlayerControls::MEDIACTRLPLAYERCONTROLS_DEFAULT) end
     
     # Stops the media.
     # See {Wx::Operation} for an overview of how stopping works.
-    # @return [true,false]
+    # @return [Boolean]
     def stop; end
     
     # Obtains the current position in time within the media in milliseconds.

data/lib/wx/doc/gen/media_event.rb

@@ -104,7 +104,7 @@ module Wx
   class MediaEvent < NotifyEvent
   
     # Default ctor.
-    # @param commandType [Wx::AUI::AuiMDIChildFrame::EventType] 
+    # @param commandType [Wx::CommandLinkButton::EventType] 
     # @param winid [Integer] 
     # @return [Wx::MediaEvent]
     def initialize(commandType=Wx::EVT_NULL, winid=0) end

data/lib/wx/doc/gen/memory_dc.rb

@@ -83,12 +83,9 @@ module Wx
     # @return [void]
     def select_object_as_source(bitmap) end
     
-    # @overload get_selected_bitmap()
-    #   Get the selected bitmap.
-    #   @return [Wx::Bitmap]
-    # @overload get_selected_bitmap()
-    #   @return [Wx::Bitmap]
-    def get_selected_bitmap(*args) end
+    # Get the selected bitmap.
+    # @return [Wx::Bitmap]
+    def get_selected_bitmap; end
     alias_method :selected_bitmap, :get_selected_bitmap
     
   end # MemoryDC

data/lib/wx/doc/gen/menu.rb

@@ -76,7 +76,7 @@ module Wx
     #   @param id [Integer]  The menu command identifier. See Window IDs for more information about IDs (same considerations apply to both window and menu item IDs).
     #   @param item [String]  The string to appear on the menu item. See {Wx::MenuItem#set_item_label} for more details.
     #   @param helpString [String]  An optional help string associated with the item. By default, the handler for the {Wx::EVT_MENU_HIGHLIGHT} event displays this string in the status line.
-    #   @param kind [ItemKind]  May be {Wx::ItemKind::ITEM_SEPARATOR}, {Wx::ItemKind::ITEM_NORMAL}, {Wx::ItemKind::ITEM_CHECK} or {Wx::ItemKind::ITEM_RADIO}.
+    #   @param kind [Wx::ItemKind]  May be {Wx::ItemKind::ITEM_SEPARATOR}, {Wx::ItemKind::ITEM_NORMAL}, {Wx::ItemKind::ITEM_CHECK} or {Wx::ItemKind::ITEM_RADIO}.
     #   @return [Wx::MenuItem]
     # @overload append(menuItem)
     #   Adds a menu item object.
@@ -143,7 +143,7 @@ module Wx
     # 
     # @see Wx::Menu#is_checked 
     # @param id [Integer]  The menu item identifier.
-    # @param check [true,false]  If true, the item will be checked, otherwise it will be unchecked.
+    # @param check [Boolean]  If true, the item will be checked, otherwise it will be unchecked.
     # @return [void]
     def check(id, check) end
     
@@ -154,7 +154,7 @@ module Wx
     #   @see  Wx::Menu#destroy
     #   @see  Wx::Menu#remove 
     #   @param id [Integer]  Id of the menu item to be deleted.
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload delete(item)
     #   Deletes the menu item from the menu.
     #   If the item is a submenu, it will <b>not</b> be deleted. Use {Wx::Menu#destroy} if you want to delete a submenu.
@@ -162,7 +162,7 @@ module Wx
     #   @see  Wx::Menu#destroy
     #   @see  Wx::Menu#remove 
     #   @param item [Wx::MenuItem]  Menu item to be deleted.
-    #   @return [true,false]
+    #   @return [Boolean]
     def delete(*args) end
     
     # @overload destroy(id)
@@ -172,7 +172,7 @@ module Wx
     #   @see  Wx::Menu#delete
     #   @see  Wx::Menu#remove 
     #   @param id [Integer]  Id of the menu item to be deleted.
-    #   @return [true,false]
+    #   @return [Boolean]
     # @overload destroy(item)
     #   Deletes the menu item from the menu.
     #   If the item is a submenu, it will be deleted. Use {Wx::Menu#remove} if you want to keep the submenu (for example, to reuse it later).
@@ -180,14 +180,14 @@ module Wx
     #   @see  Wx::Menu#delete
     #   @see  Wx::Menu#remove 
     #   @param item [Wx::MenuItem]  Menu item to be deleted.
-    #   @return [true,false]
+    #   @return [Boolean]
     def destroy(*args) end
     
     # Enables or disables (greys out) a menu item.
     # 
     # @see Wx::Menu#is_enabled 
     # @param id [Integer]  The menu item identifier.
-    # @param enable [true,false]  true to enable the menu item, false to disable it.
+    # @param enable [Boolean]  true to enable the menu item, false to disable it.
     # @return [void]
     def enable(id, enable) end
     
@@ -196,9 +196,8 @@ module Wx
     # 
     # Menu item object or NULL if not found.
     # @param id [Integer]  The identifier of the menu item to find.
-    # @param pos [size_t]  If the pointer is not NULL, it is filled with the item's position if it was found or <code></code>(size_t){Wx::NOT_FOUND} otherwise.
-    # @return [Wx::MenuItem]
-    def find_child_item(id, pos=nil) end
+    # @return [Array(Wx::MenuItem,Integer)]
+    def find_child_item(id) end
     
     # @overload find_item(itemString)
     #   Finds the menu id for a menu item string.
@@ -276,7 +275,7 @@ module Wx
     #   @param id [Integer] 
     #   @param item [String] 
     #   @param helpString [String] 
-    #   @param kind [ItemKind] 
+    #   @param kind [Wx::ItemKind] 
     #   @return [Wx::MenuItem]
     # @overload insert(pos, id, text, submenu, help=(''))
     #   Inserts the given submenu before the position pos.
@@ -325,7 +324,7 @@ module Wx
     # true if the menu item is checked, false otherwise.
     # @see Wx::Menu#check 
     # @param id [Integer]  The menu item identifier.
-    # @return [true,false]
+    # @return [Boolean]
     def is_checked(id) end
     alias_method :checked?, :is_checked
     
@@ -333,7 +332,7 @@ module Wx
     # true if the menu item is enabled, false otherwise.
     # @see Wx::Menu#enable 
     # @param id [Integer]  The menu item identifier.
-    # @return [true,false]
+    # @return [Boolean]
     def is_enabled(id) end
     alias_method :enabled?, :is_enabled
     
@@ -346,7 +345,7 @@ module Wx
     # Availability:  only available for the wxMSW port.  {Wx::msw}
     # @param param [WXUINT]  The MSW command parameter.
     # @param id [WXWORD]  The id of the command.
-    # @return [true,false]
+    # @return [Boolean]
     def msw_command(param, id) end
     
     # @overload prepend(item)
@@ -364,7 +363,7 @@ module Wx
     #   @param id [Integer] 
     #   @param item [String] 
     #   @param helpString [String] 
-    #   @param kind [ItemKind] 
+    #   @param kind [Wx::ItemKind] 
     #   @return [Wx::MenuItem]
     # @overload prepend(id, text, submenu, help=(''))
     #   Inserts the given submenu at position 0.
@@ -485,7 +484,7 @@ module Wx
     # @return [void]
     def detach; end
     
-    # @return [true,false]
+    # @return [Boolean]
     def is_attached; end
     alias_method :attached?, :is_attached
     

data/lib/wx/doc/gen/menu_bar.rb

@@ -30,33 +30,33 @@ module Wx
     # @see Wx::MenuBar#insert 
     # @param menu [Wx::Menu]  The menu to add. Do not deallocate this menu after calling {Wx::MenuBar#append}.
     # @param title [String]  The title of the menu, must be non-empty.
-    # @return [true,false]
+    # @return [Boolean]
     def append(menu, title) end
     
     # Checks or unchecks a menu item.
     # Only use this when the menu bar has been associated with a frame; otherwise, use the {Wx::Menu} equivalent call.
     # @param id [Integer]  The menu item identifier.
-    # @param check [true,false]  If true, checks the menu item, otherwise the item is unchecked.
+    # @param check [Boolean]  If true, checks the menu item, otherwise the item is unchecked.
     # @return [void]
     def check(id, check) end
     
     # Enables or disables (greys out) a menu item.
     # Only use this when the menu bar has been associated with a frame; otherwise, use the {Wx::Menu} equivalent call.
     # @param id [Integer]  The menu item identifier.
-    # @param enable [true,false]  true to enable the item, false to disable it.
+    # @param enable [Boolean]  true to enable the item, false to disable it.
     # @return [void]
     def enable(id, enable) end
     
     # Returns true if the menu with the given index is enabled.
     # @param pos [Integer]  The menu position (0-based)
-    # @return [true,false]
+    # @return [Boolean]
     def is_enabled_top(pos) end
     alias_method :enabled_top?, :is_enabled_top
     
     # Enables or disables a whole menu.
     # Only use this when the menu bar has been associated with a frame.
     # @param pos [Integer]  The position of the menu, starting from zero.
-    # @param enable [true,false]  true to enable the menu, false to disable it.
+    # @param enable [Boolean]  true to enable the menu, false to disable it.
     # @return [void]
     def enable_top(pos, enable) end
     
@@ -144,20 +144,20 @@ module Wx
     # @param pos [Integer]  The position of the new menu in the menu bar
     # @param menu [Wx::Menu]  The menu to add. {Wx::MenuBar} owns the menu and will free it.
     # @param title [String]  The title of the menu.
-    # @return [true,false]
+    # @return [Boolean]
     def insert(pos, menu, title) end
     
     # Determines whether an item is checked.
     # true if the item was found and is checked, false otherwise.
     # @param id [Integer]  The menu item identifier.
-    # @return [true,false]
+    # @return [Boolean]
     def is_checked(id) end
     alias_method :checked?, :is_checked
     
     # Determines whether an item is enabled.
     # true if the item was found and is enabled, false otherwise.
     # @param id [Integer]  The menu item identifier.
-    # @return [true,false]
+    # @return [Boolean]
     def is_enabled(id) end
     alias_method :enabled?, :is_enabled
     
@@ -205,7 +205,7 @@ module Wx
     def get_frame; end
     alias_method :frame, :get_frame
     
-    # @return [true,false]
+    # @return [Boolean]
     def is_attached; end
     alias_method :attached?, :is_attached
     
@@ -216,23 +216,6 @@ module Wx
     # @return [void]
     def detach; end
     
-    # Enables you to set the global menubar on Mac, that is, the menubar displayed when the app is running without any frames open.
-    # Only exists on Mac, other platforms do not have this method.
-    # 
-    # Availability:  only available for the wxOSX/Cocoa port.  {Wx::osx}
-    # @param menubar [Wx::MenuBar]  The menubar to set.
-    # @return [void]
-    def self.mac_set_common_menu_bar(menubar) end
-    
-    # Enables you to get the global menubar on Mac, that is, the menubar displayed when the app is running without any frames open.
-    # The global menubar.
-    # 
-    # Only exists on Mac, other platforms do not have this method.
-    # 
-    # Availability:  only available for the wxOSX/Cocoa port.  {Wx::osx}
-    # @return [Wx::MenuBar]
-    def self.mac_get_common_menu_bar; end
-    
   end # MenuBar